blob: b1a60f1cbd021446bf6c91625e2f0e17f7e8b474 [file] [log] [blame]
/*
* Alchemy Semi Pb1100 Referrence Board
*
* Copyright 2001, 2008 MontaVista Software Inc.
* Author: MontaVista Software, Inc. <source@mvista.com>
*
* ########################################################################
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
* published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
*
* ########################################################################
*
*
*/
#ifndef __ASM_PB1100_H
#define __ASM_PB1100_H
#define PB1100_IDENT 0xAE000000
#define BOARD_STATUS_REG 0xAE000004
# define PB1100_ROM_SEL (1 << 15)
# define PB1100_ROM_SIZ (1 << 14)
# define PB1100_SWAP_BOOT (1 << 13)
# define PB1100_FLASH_WP (1 << 12)
# define PB1100_ROM_H_STS (1 << 11)
# define PB1100_ROM_L_STS (1 << 10)
# define PB1100_FLASH_H_STS (1 << 9)
# define PB1100_FLASH_L_STS (1 << 8)
# define PB1100_SRAM_SIZ (1 << 7)
# define PB1100_TSC_BUSY (1 << 6)
# define PB1100_PCMCIA_VS_MASK (3 << 4)
# define PB1100_RS232_CD (1 << 3)
# define PB1100_RS232_CTS (1 << 2)
# define PB1100_RS232_DSR (1 << 1)
# define PB1100_RS232_RI (1 << 0)
#define PB1100_IRDA_RS232 0xAE00000C
# define PB1100_IRDA_FULL (0 << 14) /* full power */
# define PB1100_IRDA_SHUTDOWN (1 << 14)
# define PB1100_IRDA_TT (2 << 14) /* 2/3 power */
# define PB1100_IRDA_OT (3 << 14) /* 1/3 power */
# define PB1100_IRDA_FIR (1 << 13)
#define PCMCIA_BOARD_REG 0xAE000010
# define PB1100_SD_WP1_RO (1 << 15) /* read only */
# define PB1100_SD_WP0_RO (1 << 14) /* read only */
# define PB1100_SD_PWR1 (1 << 11) /* applies power to SD1 */
# define PB1100_SD_PWR0 (1 << 10) /* applies power to SD0 */
# define PB1100_SEL_SD_CONN1 (1 << 9)
# define PB1100_SEL_SD_CONN0 (1 << 8)
# define PC_DEASSERT_RST (1 << 7)
# define PC_DRV_EN (1 << 4)
#define PB1100_G_CONTROL 0xAE000014 /* graphics control */
#define PB1100_RST_VDDI 0xAE00001C
# define PB1100_SOFT_RESET (1 << 15) /* clear to reset the board */
# define PB1100_VDDI_MASK 0x1F
#define PB1100_LEDS 0xAE000018
/*
* 11:8 is 4 discreet LEDs. Clearing a bit illuminates the LED.
* 7:0 is the LED Display's decimal points.
*/
#define PB1100_HEX_LED 0xAE000018
/* PCMCIA Pb1100 specific defines */
#define PCMCIA_MAX_SOCK 0
#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
/* VPP/VCC */
#define SET_VCC_VPP(VCC, VPP) (((VCC) << 2) | ((VPP) << 0))
#endif /* __ASM_PB1100_H */