blob: 372d0ca6efbc66cfb98fafd6720e57044dc7bcd9 [file] [log] [blame]
/*
* Copyright (C) 2003, Axis Communications AB.
*/
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/kernel.h>
#include <linux/signal.h>
#include <linux/errno.h>
#include <linux/wait.h>
#include <linux/ptrace.h>
#include <linux/unistd.h>
#include <linux/stddef.h>
#include <linux/syscalls.h>
#include <linux/vmalloc.h>
#include <asm/io.h>
#include <asm/processor.h>
#include <asm/ucontext.h>
#include <asm/uaccess.h>
#include <arch/ptrace.h>
#include <arch/hwregs/cpu_vect.h>
extern unsigned long cris_signal_return_page;
/* Flag to check if a signal is blockable. */
#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
/*
* A syscall in CRIS is really a "break 13" instruction, which is 2
* bytes. The registers is manipulated so upon return the instruction
* will be executed again.
*
* This relies on that PC points to the instruction after the break call.
*/
#define RESTART_CRIS_SYS(regs) regs->r10 = regs->orig_r10; regs->erp -= 2;
/* Signal frames. */
struct signal_frame {
struct sigcontext sc;
unsigned long extramask[_NSIG_WORDS - 1];
unsigned char retcode[8]; /* Trampoline code. */
};
struct rt_signal_frame {
struct siginfo *pinfo;
void *puc;
struct siginfo info;
struct ucontext uc;
unsigned char retcode[8]; /* Trampoline code. */
};
void do_signal(int restart, struct pt_regs *regs);
void keep_debug_flags(unsigned long oldccs, unsigned long oldspc,
struct pt_regs *regs);
/*
* Swap in the new signal mask, and wait for a signal. Define some
* dummy arguments to be able to reach the regs argument.
*/
int
sys_sigsuspend(old_sigset_t mask, long r11, long r12, long r13, long mof,
long srp, struct pt_regs *regs)
{
mask &= _BLOCKABLE;
spin_lock_irq(&current->sighand->siglock);
current->saved_sigmask = current->blocked;
siginitset(&current->blocked, mask);
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
current->state = TASK_INTERRUPTIBLE;
schedule();
set_thread_flag(TIF_RESTORE_SIGMASK);
return -ERESTARTNOHAND;
}
int
sys_sigaction(int signal, const struct old_sigaction *act,
struct old_sigaction *oact)
{
int retval;
struct k_sigaction newk;
struct k_sigaction oldk;
if (act) {
old_sigset_t mask;
if (!access_ok(VERIFY_READ, act, sizeof(*act)) ||
__get_user(newk.sa.sa_handler, &act->sa_handler) ||
__get_user(newk.sa.sa_restorer, &act->sa_restorer))
return -EFAULT;
__get_user(newk.sa.sa_flags, &act->sa_flags);
__get_user(mask, &act->sa_mask);
siginitset(&newk.sa.sa_mask, mask);
}
retval = do_sigaction(signal, act ? &newk : NULL, oact ? &oldk : NULL);
if (!retval && oact) {
if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) ||
__put_user(oldk.sa.sa_handler, &oact->sa_handler) ||
__put_user(oldk.sa.sa_restorer, &oact->sa_restorer))
return -EFAULT;
__put_user(oldk.sa.sa_flags, &oact->sa_flags);
__put_user(oldk.sa.sa_mask.sig[0], &oact->sa_mask);
}
return retval;
}
int
sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss)
{
return do_sigaltstack(uss, uoss, rdusp());
}
static int
restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
{
unsigned int err = 0;
unsigned long old_usp;
/* Always make any pending restarted system calls return -EINTR */
current_thread_info()->restart_block.fn = do_no_restart_syscall;
/*
* Restore the registers from &sc->regs. sc is already checked
* for VERIFY_READ since the signal_frame was previously
* checked in sys_sigreturn().
*/
if (__copy_from_user(regs, sc, sizeof(struct pt_regs)))
goto badframe;
/* Make that the user-mode flag is set. */
regs->ccs |= (1 << (U_CCS_BITNR + CCS_SHIFT));
/* Restore the old USP. */
err |= __get_user(old_usp, &sc->usp);
wrusp(old_usp);
return err;
badframe:
return 1;
}
/* Define some dummy arguments to be able to reach the regs argument. */
asmlinkage int
sys_sigreturn(long r10, long r11, long r12, long r13, long mof, long srp,
struct pt_regs *regs)
{
sigset_t set;
struct signal_frame __user *frame;
unsigned long oldspc = regs->spc;
unsigned long oldccs = regs->ccs;
frame = (struct signal_frame *) rdusp();
/*
* Since the signal is stacked on a dword boundary, the frame
* should be dword aligned here as well. It it's not, then the
* user is trying some funny business.
*/
if (((long)frame) & 3)
goto badframe;
if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
goto badframe;
if (__get_user(set.sig[0], &frame->sc.oldmask) ||
(_NSIG_WORDS > 1 && __copy_from_user(&set.sig[1],
frame->extramask,
sizeof(frame->extramask))))
goto badframe;
sigdelsetmask(&set, ~_BLOCKABLE);
spin_lock_irq(&current->sighand->siglock);
current->blocked = set;
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
if (restore_sigcontext(regs, &frame->sc))
goto badframe;
keep_debug_flags(oldccs, oldspc, regs);
return regs->r10;
badframe:
force_sig(SIGSEGV, current);
return 0;
}
/* Define some dummy variables to be able to reach the regs argument. */
asmlinkage int
sys_rt_sigreturn(long r10, long r11, long r12, long r13, long mof, long srp,
struct pt_regs *regs)
{
sigset_t set;
struct rt_signal_frame __user *frame;
unsigned long oldspc = regs->spc;
unsigned long oldccs = regs->ccs;
frame = (struct rt_signal_frame *) rdusp();
/*
* Since the signal is stacked on a dword boundary, the frame
* should be dword aligned here as well. It it's not, then the
* user is trying some funny business.
*/
if (((long)frame) & 3)
goto badframe;
if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
goto badframe;
if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
goto badframe;
sigdelsetmask(&set, ~_BLOCKABLE);
spin_lock_irq(&current->sighand->siglock);
current->blocked = set;
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
if (restore_sigcontext(regs, &frame->uc.uc_mcontext))
goto badframe;
if (do_sigaltstack(&frame->uc.uc_stack, NULL, rdusp()) == -EFAULT)
goto badframe;
keep_debug_flags(oldccs, oldspc, regs);
return regs->r10;
badframe:
force_sig(SIGSEGV, current);
return 0;
}
/* Setup a signal frame. */
static int
setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
unsigned long mask)
{
int err;
unsigned long usp;
err = 0;
usp = rdusp();
/*
* Copy the registers. They are located first in sc, so it's
* possible to use sc directly.
*/
err |= __copy_to_user(sc, regs, sizeof(struct pt_regs));
err |= __put_user(mask, &sc->oldmask);
err |= __put_user(usp, &sc->usp);
return err;
}
/* Figure out where to put the new signal frame - usually on the stack. */
static inline void __user *
get_sigframe(struct k_sigaction *ka, struct pt_regs * regs, size_t frame_size)
{
unsigned long sp;
sp = rdusp();
/* This is the X/Open sanctioned signal stack switching. */
if (ka->sa.sa_flags & SA_ONSTACK) {
if (!on_sig_stack(sp))
sp = current->sas_ss_sp + current->sas_ss_size;
}
/* Make sure the frame is dword-aligned. */
sp &= ~3;
return (void __user *)(sp - frame_size);
}
/* Grab and setup a signal frame.
*
* Basically a lot of state-info is stacked, and arranged for the
* user-mode program to return to the kernel using either a trampiline
* which performs the syscall sigreturn(), or a provided user-mode
* trampoline.
*/
static int
setup_frame(int sig, struct k_sigaction *ka, sigset_t *set,
struct pt_regs * regs)
{
int err;
unsigned long return_ip;
struct signal_frame __user *frame;
err = 0;
frame = get_sigframe(ka, regs, sizeof(*frame));
if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
goto give_sigsegv;
err |= setup_sigcontext(&frame->sc, regs, set->sig[0]);
if (err)
goto give_sigsegv;
if (_NSIG_WORDS > 1) {
err |= __copy_to_user(frame->extramask, &set->sig[1],
sizeof(frame->extramask));
}
if (err)
goto give_sigsegv;
/*
* Set up to return from user-space. If provided, use a stub
* already located in user-space.
*/
if (ka->sa.sa_flags & SA_RESTORER) {
return_ip = (unsigned long)ka->sa.sa_restorer;
} else {
/* Trampoline - the desired return ip is in the signal return page. */
return_ip = cris_signal_return_page;
/*
* This is movu.w __NR_sigreturn, r9; break 13;
*
* WE DO NOT USE IT ANY MORE! It's only left here for historical
* reasons and because gdb uses it as a signature to notice
* signal handler stack frames.
*/
err |= __put_user(0x9c5f, (short __user*)(frame->retcode+0));
err |= __put_user(__NR_sigreturn, (short __user*)(frame->retcode+2));
err |= __put_user(0xe93d, (short __user*)(frame->retcode+4));
}
if (err)
goto give_sigsegv;
/*
* Set up registers for signal handler.
*
* Where the code enters now.
* Where the code enter later.
* First argument, signo.
*/
regs->erp = (unsigned long) ka->sa.sa_handler;
regs->srp = return_ip;
regs->r10 = sig;
/* Actually move the USP to reflect the stacked frame. */
wrusp((unsigned long)frame);
return 0;
give_sigsegv:
if (sig == SIGSEGV)
ka->sa.sa_handler = SIG_DFL;
force_sig(SIGSEGV, current);
return -EFAULT;
}
static int
setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
sigset_t *set, struct pt_regs * regs)
{
int err;
unsigned long return_ip;
struct rt_signal_frame __user *frame;
err = 0;
frame = get_sigframe(ka, regs, sizeof(*frame));
if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
goto give_sigsegv;
/* TODO: what is the current->exec_domain stuff and invmap ? */
err |= __put_user(&frame->info, &frame->pinfo);
err |= __put_user(&frame->uc, &frame->puc);
err |= copy_siginfo_to_user(&frame->info, info);
if (err)
goto give_sigsegv;
/* Clear all the bits of the ucontext we don't use. */
err |= __clear_user(&frame->uc, offsetof(struct ucontext, uc_mcontext));
err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, set->sig[0]);
err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
if (err)
goto give_sigsegv;
/*
* Set up to return from user-space. If provided, use a stub
* already located in user-space.
*/
if (ka->sa.sa_flags & SA_RESTORER) {
return_ip = (unsigned long) ka->sa.sa_restorer;
} else {
/* Trampoline - the desired return ip is in the signal return page. */
return_ip = cris_signal_return_page + 6;
/*
* This is movu.w __NR_rt_sigreturn, r9; break 13;
*
* WE DO NOT USE IT ANY MORE! It's only left here for historical
* reasons and because gdb uses it as a signature to notice
* signal handler stack frames.
*/
err |= __put_user(0x9c5f, (short __user*)(frame->retcode+0));
err |= __put_user(__NR_rt_sigreturn,
(short __user*)(frame->retcode+2));
err |= __put_user(0xe93d, (short __user*)(frame->retcode+4));
}
if (err)
goto give_sigsegv;
/*
* Set up registers for signal handler.
*
* Where the code enters now.
* Where the code enters later.
* First argument is signo.
* Second argument is (siginfo_t *).
* Third argument is unused.
*/
regs->erp = (unsigned long) ka->sa.sa_handler;
regs->srp = return_ip;
regs->r10 = sig;
regs->r11 = (unsigned long) &frame->info;
regs->r12 = 0;
/* Actually move the usp to reflect the stacked frame. */
wrusp((unsigned long)frame);
return 0;
give_sigsegv:
if (sig == SIGSEGV)
ka->sa.sa_handler = SIG_DFL;
force_sig(SIGSEGV, current);
return -EFAULT;
}
/* Invoke a signal handler to, well, handle the signal. */
static inline int
handle_signal(int canrestart, unsigned long sig,
siginfo_t *info, struct k_sigaction *ka,
sigset_t *oldset, struct pt_regs * regs)
{
int ret;
/* Check if this got called from a system call. */
if (canrestart) {
/* If so, check system call restarting. */
switch (regs->r10) {
case -ERESTART_RESTARTBLOCK:
case -ERESTARTNOHAND:
/*
* This means that the syscall should
* only be restarted if there was no
* handler for the signal, and since
* this point isn't reached unless
* there is a handler, there's no need
* to restart.
*/
regs->r10 = -EINTR;
break;
case -ERESTARTSYS:
/*
* This means restart the syscall if
* there is no handler, or the handler
* was registered with SA_RESTART.
*/
if (!(ka->sa.sa_flags & SA_RESTART)) {
regs->r10 = -EINTR;
break;
}
/* Fall through. */
case -ERESTARTNOINTR:
/*
* This means that the syscall should
* be called again after the signal
* handler returns.
*/
RESTART_CRIS_SYS(regs);
break;
}
}
/* Set up the stack frame. */
if (ka->sa.sa_flags & SA_SIGINFO)
ret = setup_rt_frame(sig, ka, info, oldset, regs);
else
ret = setup_frame(sig, ka, oldset, regs);
if (ka->sa.sa_flags & SA_ONESHOT)
ka->sa.sa_handler = SIG_DFL;
if (ret == 0) {
spin_lock_irq(&current->sighand->siglock);
sigorsets(&current->blocked, &current->blocked,
&ka->sa.sa_mask);
if (!(ka->sa.sa_flags & SA_NODEFER))
sigaddset(&current->blocked, sig);
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
}
return ret;
}
/*
* Note that 'init' is a special process: it doesn't get signals it doesn't
* want to handle. Thus you cannot kill init even with a SIGKILL even by
* mistake.
*
* Also note that the regs structure given here as an argument, is the latest
* pushed pt_regs. It may or may not be the same as the first pushed registers
* when the initial usermode->kernelmode transition took place. Therefore
* we can use user_mode(regs) to see if we came directly from kernel or user
* mode below.
*/
void
do_signal(int canrestart, struct pt_regs *regs)
{
int signr;
siginfo_t info;
struct k_sigaction ka;
sigset_t *oldset;
/*
* The common case should go fast, which is why this point is
* reached from kernel-mode. If that's the case, just return
* without doing anything.
*/
if (!user_mode(regs))
return;
if (test_thread_flag(TIF_RESTORE_SIGMASK))
oldset = &current->saved_sigmask;
else
oldset = &current->blocked;
signr = get_signal_to_deliver(&info, &ka, regs, NULL);
if (signr > 0) {
/* Whee! Actually deliver the signal. */
if (handle_signal(canrestart, signr, &info, &ka,
oldset, regs)) {
/* a signal was successfully delivered; the saved
* sigmask will have been stored in the signal frame,
* and will be restored by sigreturn, so we can simply
* clear the TIF_RESTORE_SIGMASK flag */
if (test_thread_flag(TIF_RESTORE_SIGMASK))
clear_thread_flag(TIF_RESTORE_SIGMASK);
}
return;
}
/* Got here from a system call? */
if (canrestart) {
/* Restart the system call - no handlers present. */
if (regs->r10 == -ERESTARTNOHAND ||
regs->r10 == -ERESTARTSYS ||
regs->r10 == -ERESTARTNOINTR) {
RESTART_CRIS_SYS(regs);
}
if (regs->r10 == -ERESTART_RESTARTBLOCK){
regs->r10 = __NR_restart_syscall;
regs->erp -= 2;
}
}
/* if there's no signal to deliver, we just put the saved sigmask
* back */
if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
clear_thread_flag(TIF_RESTORE_SIGMASK);
sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
}
}
asmlinkage void
ugdb_trap_user(struct thread_info *ti, int sig)
{
if (((user_regs(ti)->exs & 0xff00) >> 8) != SINGLE_STEP_INTR_VECT) {
/* Zero single-step PC if the reason we stopped wasn't a single
step exception. This is to avoid relying on it when it isn't
reliable. */
user_regs(ti)->spc = 0;
}
/* FIXME: Filter out false h/w breakpoint hits (i.e. EDA
not withing any configured h/w breakpoint range). Synchronize with
what already exists for kernel debugging. */
if (((user_regs(ti)->exs & 0xff00) >> 8) == BREAK_8_INTR_VECT) {
/* Break 8: subtract 2 from ERP unless in a delay slot. */
if (!(user_regs(ti)->erp & 0x1))
user_regs(ti)->erp -= 2;
}
sys_kill(ti->task->pid, sig);
}
void
keep_debug_flags(unsigned long oldccs, unsigned long oldspc,
struct pt_regs *regs)
{
if (oldccs & (1 << Q_CCS_BITNR)) {
/* Pending single step due to single-stepping the break 13
in the signal trampoline: keep the Q flag. */
regs->ccs |= (1 << Q_CCS_BITNR);
/* S flag should be set - complain if it's not. */
if (!(oldccs & (1 << (S_CCS_BITNR + CCS_SHIFT)))) {
printk("Q flag but no S flag?");
}
regs->ccs |= (1 << (S_CCS_BITNR + CCS_SHIFT));
/* Assume the SPC is valid and interesting. */
regs->spc = oldspc;
} else if (oldccs & (1 << (S_CCS_BITNR + CCS_SHIFT))) {
/* If a h/w bp was set in the signal handler we need
to keep the S flag. */
regs->ccs |= (1 << (S_CCS_BITNR + CCS_SHIFT));
/* Don't keep the old SPC though; if we got here due to
a single-step, the Q flag should have been set. */
} else if (regs->spc) {
/* If we were single-stepping *before* the signal was taken,
we don't want to restore that state now, because GDB will
have forgotten all about it. */
regs->spc = 0;
regs->ccs &= ~(1 << (S_CCS_BITNR + CCS_SHIFT));
}
}
/* Set up the trampolines on the signal return page. */
int __init
cris_init_signal(void)
{
u16* data = kmalloc(PAGE_SIZE, GFP_KERNEL);
/* This is movu.w __NR_sigreturn, r9; break 13; */
data[0] = 0x9c5f;
data[1] = __NR_sigreturn;
data[2] = 0xe93d;
/* This is movu.w __NR_rt_sigreturn, r9; break 13; */
data[3] = 0x9c5f;
data[4] = __NR_rt_sigreturn;
data[5] = 0xe93d;
/* Map to userspace with appropriate permissions (no write access...) */
cris_signal_return_page = (unsigned long)
__ioremap_prot(virt_to_phys(data), PAGE_SIZE, PAGE_SIGNAL_TRAMPOLINE);
return 0;
}
__initcall(cris_init_signal);