blob: f826f6b9f917e168e31ef84604549424745015c7 [file] [log] [blame]
/*
* Common Blackfin startup code
*
* Copyright 2004-2008 Analog Devices Inc.
*
* Enter bugs at http://blackfin.uclinux.org/
*
* Licensed under the GPL-2 or later.
*/
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/blackfin.h>
#include <asm/thread_info.h>
#include <asm/trace.h>
#include <asm/asm-offsets.h>
__INIT
ENTRY(__init_clear_bss)
r2 = r2 - r1;
cc = r2 == 0;
if cc jump .L_bss_done;
r2 >>= 2;
p1 = r1;
p2 = r2;
lsetup (1f, 1f) lc0 = p2;
1: [p1++] = r0;
.L_bss_done:
rts;
ENDPROC(__init_clear_bss)
ENTRY(__start)
/* R0: argument of command line string, passed from uboot, save it */
R7 = R0;
/* Enable Cycle Counter and Nesting Of Interrupts */
#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES
R0 = SYSCFG_SNEN;
#else
R0 = SYSCFG_SNEN | SYSCFG_CCEN;
#endif
SYSCFG = R0;
R0 = 0;
/* Clear Out All the data and pointer Registers */
R1 = R0;
R2 = R0;
R3 = R0;
R4 = R0;
R5 = R0;
R6 = R0;
P0 = R0;
P1 = R0;
P2 = R0;
P3 = R0;
P4 = R0;
P5 = R0;
LC0 = r0;
LC1 = r0;
L0 = r0;
L1 = r0;
L2 = r0;
L3 = r0;
/* Clear Out All the DAG Registers */
B0 = r0;
B1 = r0;
B2 = r0;
B3 = r0;
I0 = r0;
I1 = r0;
I2 = r0;
I3 = r0;
M0 = r0;
M1 = r0;
M2 = r0;
M3 = r0;
/*
* Clear ITEST_COMMAND and DTEST_COMMAND registers,
* Leaving these as non-zero can confuse the emulator
*/
p0.L = LO(DTEST_COMMAND);
p0.H = HI(DTEST_COMMAND);
[p0] = R0;
[p0 + (ITEST_COMMAND - DTEST_COMMAND)] = R0;
CSYNC;
trace_buffer_init(p0,r0);
P0 = R1;
R0 = R1;
/* Turn off the icache */
p0.l = LO(IMEM_CONTROL);
p0.h = HI(IMEM_CONTROL);
R1 = [p0];
R0 = ~ENICPLB;
R0 = R0 & R1;
[p0] = R0;
SSYNC;
/* Turn off the dcache */
p0.l = LO(DMEM_CONTROL);
p0.h = HI(DMEM_CONTROL);
R1 = [p0];
R0 = ~ENDCPLB;
R0 = R0 & R1;
[p0] = R0;
SSYNC;
/* in case of double faults, save a few things */
p0.l = _init_retx;
p0.h = _init_retx;
R0 = RETX;
[P0] = R0;
#ifdef CONFIG_DEBUG_DOUBLEFAULT
/* Only save these if we are storing them,
* This happens here, since L1 gets clobbered
* below
*/
GET_PDA(p0, r0);
r6 = [p0 + PDA_RETX];
p1.l = _init_saved_retx;
p1.h = _init_saved_retx;
[p1] = r6;
r6 = [p0 + PDA_DCPLB];
p1.l = _init_saved_dcplb_fault_addr;
p1.h = _init_saved_dcplb_fault_addr;
[p1] = r6;
r6 = [p0 + PDA_ICPLB];
p1.l = _init_saved_icplb_fault_addr;
p1.h = _init_saved_icplb_fault_addr;
[p1] = r6;
r6 = [p0 + PDA_SEQSTAT];
p1.l = _init_saved_seqstat;
p1.h = _init_saved_seqstat;
[p1] = r6;
#endif
/* Initialize stack pointer */
sp.l = _init_thread_union;
sp.h = _init_thread_union;
fp = sp;
usp = sp;
#ifdef CONFIG_EARLY_PRINTK
call _init_early_exception_vectors;
#endif
r0 = 0 (x);
/* Zero out all of the fun bss regions */
#if L1_DATA_A_LENGTH > 0
r1.l = __sbss_l1;
r1.h = __sbss_l1;
r2.l = __ebss_l1;
r2.h = __ebss_l1;
call __init_clear_bss
#endif
#if L1_DATA_B_LENGTH > 0
r1.l = __sbss_b_l1;
r1.h = __sbss_b_l1;
r2.l = __ebss_b_l1;
r2.h = __ebss_b_l1;
call __init_clear_bss
#endif
#if L2_LENGTH > 0
r1.l = __sbss_l2;
r1.h = __sbss_l2;
r2.l = __ebss_l2;
r2.h = __ebss_l2;
call __init_clear_bss
#endif
r1.l = ___bss_start;
r1.h = ___bss_start;
r2.l = ___bss_stop;
r2.h = ___bss_stop;
call __init_clear_bss
/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
call _bfin_relocate_l1_mem;
#ifdef CONFIG_BFIN_KERNEL_CLOCK
/* Only use on-chip scratch space for stack when absolutely required
* to avoid Anomaly 05000227 ... we know the init_clocks() func only
* uses L1 text and stack space and no other memory region.
*/
# define KERNEL_CLOCK_STACK (L1_SCRATCH_START + L1_SCRATCH_LENGTH - 12)
sp.l = lo(KERNEL_CLOCK_STACK);
sp.h = hi(KERNEL_CLOCK_STACK);
call _init_clocks;
sp = usp; /* usp hasnt been touched, so restore from there */
#endif
/* This section keeps the processor in supervisor mode
* during kernel boot. Switches to user mode at end of boot.
* See page 3-9 of Hardware Reference manual for documentation.
*/
/* EVT15 = _real_start */
p0.l = lo(EVT15);
p0.h = hi(EVT15);
p1.l = _real_start;
p1.h = _real_start;
[p0] = p1;
csync;
r0 = EVT_IVG15 (z);
sti r0;
raise 15;
p0.l = .LWAIT_HERE;
p0.h = .LWAIT_HERE;
reti = p0;
#if ANOMALY_05000281
nop; nop; nop;
#endif
rti;
.LWAIT_HERE:
jump .LWAIT_HERE;
ENDPROC(__start)
/* A little BF561 glue ... */
#ifndef WDOG_CTL
# define WDOG_CTL WDOGA_CTL
#endif
ENTRY(_real_start)
/* Enable nested interrupts */
[--sp] = reti;
/* watchdog off for now */
p0.l = lo(WDOG_CTL);
p0.h = hi(WDOG_CTL);
r0 = 0xAD6(z);
w[p0] = r0;
ssync;
/* Pass the u-boot arguments to the global value command line */
R0 = R7;
call _cmdline_init;
/* Load the current thread pointer and stack */
p1 = THREAD_SIZE + 4 (z); /* +4 is for reti loading */
sp = sp + p1;
usp = sp;
fp = sp;
sp += -12;
call _init_pda
sp += 12;
jump.l _start_kernel;
ENDPROC(_real_start)
__FINIT