blob: f3eabf1ecec333643273d9f797a7afd70cc4894d [file] [log] [blame]
/*
* arch/arm/include/asm/mach/udc_pxa2xx.h
*
* This supports machine-specific differences in how the PXA2xx
* USB Device Controller (UDC) is wired.
*
* It is set in linux/arch/arm/mach-pxa/<machine>.c or in
* linux/arch/mach-ixp4xx/<machine>.c and used in
* the probe routine of linux/drivers/usb/gadget/pxa2xx_udc.c
*/
struct pxa2xx_udc_mach_info {
int (*udc_is_connected)(void); /* do we see host? */
void (*udc_command)(int cmd);
#define PXA2XX_UDC_CMD_CONNECT 0 /* let host see us */
#define PXA2XX_UDC_CMD_DISCONNECT 1 /* so host won't see us */
/* Boards following the design guidelines in the developer's manual,
* with on-chip GPIOs not Lubbock's weird hardware, can have a sane
* VBUS IRQ and omit the methods above. Store the GPIO number
* here. Note that sometimes the signals go through inverters...
*/
bool gpio_vbus_inverted;
u16 gpio_vbus; /* high == vbus present */
bool gpio_pullup_inverted;
u16 gpio_pullup; /* high == pullup activated */
};