| /* |
| * jjPlus JWAP003 board support |
| * |
| */ |
| |
| #include <linux/i2c.h> |
| #include <linux/i2c-gpio.h> |
| #include <linux/platform_device.h> |
| |
| #include <asm/mach-ath79/ath79.h> |
| |
| #include "dev-eth.h" |
| #include "dev-m25p80.h" |
| #include "dev-gpio-buttons.h" |
| #include "dev-usb.h" |
| #include "machtypes.h" |
| #include "pci.h" |
| |
| #define JWAP003_KEYS_POLL_INTERVAL 20 /* msecs */ |
| #define JWAP003_KEYS_DEBOUNCE_INTERVAL (3 * JWAP003_KEYS_POLL_INTERVAL) |
| |
| #define JWAP003_GPIO_WPS 11 |
| #define JWAP003_GPIO_I2C_SCL 0 |
| #define JWAP003_GPIO_I2C_SDA 1 |
| |
| static struct gpio_keys_button jwap003_gpio_keys[] __initdata = { |
| { |
| .desc = "wps", |
| .type = EV_KEY, |
| .code = KEY_WPS_BUTTON, |
| .debounce_interval = JWAP003_KEYS_DEBOUNCE_INTERVAL, |
| .gpio = JWAP003_GPIO_WPS, |
| .active_low = 1, |
| } |
| }; |
| |
| static struct i2c_gpio_platform_data jwap003_i2c_gpio_data = { |
| .sda_pin = JWAP003_GPIO_I2C_SDA, |
| .scl_pin = JWAP003_GPIO_I2C_SCL, |
| }; |
| |
| static struct platform_device jwap003_i2c_gpio_device = { |
| .name = "i2c-gpio", |
| .id = 0, |
| .dev = { |
| .platform_data = &jwap003_i2c_gpio_data, |
| } |
| }; |
| |
| static const char *jwap003_part_probes[] = { |
| "RedBoot", |
| NULL, |
| }; |
| |
| static struct flash_platform_data jwap003_flash_data = { |
| .part_probes = jwap003_part_probes, |
| }; |
| |
| #define JWAP003_WAN_PHYMASK BIT(0) |
| #define JWAP003_LAN_PHYMASK BIT(4) |
| |
| static void __init jwap003_init(void) |
| { |
| ath79_register_m25p80(&jwap003_flash_data); |
| |
| ath79_register_mdio(0, 0x0); |
| |
| ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); |
| ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; |
| ath79_eth0_data.phy_mask = JWAP003_WAN_PHYMASK; |
| ath79_eth0_data.speed = SPEED_100; |
| ath79_eth0_data.duplex = DUPLEX_FULL; |
| ath79_eth0_data.has_ar8216 = 1; |
| |
| ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1); |
| ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; |
| ath79_eth1_data.phy_mask = JWAP003_LAN_PHYMASK; |
| ath79_eth1_data.speed = SPEED_100; |
| ath79_eth1_data.duplex = DUPLEX_FULL; |
| |
| ath79_register_eth(0); |
| ath79_register_eth(1); |
| |
| platform_device_register(&jwap003_i2c_gpio_device); |
| |
| ath79_register_usb(); |
| |
| ath79_register_gpio_keys_polled(-1, JWAP003_KEYS_POLL_INTERVAL, |
| ARRAY_SIZE(jwap003_gpio_keys), |
| jwap003_gpio_keys); |
| |
| ath79_register_pci(); |
| } |
| |
| MIPS_MACHINE(ATH79_MACH_JWAP003, "JWAP003", "jjPlus JWAP003", jwap003_init); |