blob: cdfc2a1f0e75778bcbe549b8b86dae212bed25ba [file] [log] [blame]
/* arch/arm/mach-omap2/include/mach/debug-macro.S
*
* Debugging macro include header
*
* Copyright (C) 1994-1999 Russell King
* Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/serial_reg.h>
#include <plat/serial.h>
#define UART_OFFSET(addr) ((addr) & 0x00ffffff)
.pushsection .data
omap_uart_phys: .word 0
omap_uart_virt: .word 0
omap_uart_lsr: .word 0
.popsection
/*
* Note that this code won't work if the bootloader passes
* a wrong machine ID number in r1. To debug, just hardcode
* the desired UART phys and virt addresses temporarily into
* the omap_uart_phys and omap_uart_virt above.
*/
.macro addruart, rp, rv, tmp
/* Use omap_uart_phys/virt if already configured */
10: adr \rp, 99f @ get effective addr of 99f
ldr \rv, [\rp] @ get absolute addr of 99f
sub \rv, \rv, \rp @ offset between the two
ldr \rp, [\rp, #4] @ abs addr of omap_uart_phys
sub \tmp, \rp, \rv @ make it effective
ldr \rp, [\tmp, #0] @ omap_uart_phys
ldr \rv, [\tmp, #4] @ omap_uart_virt
cmp \rp, #0 @ is port configured?
cmpne \rv, #0
bne 100f @ already configured
/* Check the debug UART configuration set in uncompress.h */
mov \rp, pc
ldr \rv, =OMAP_UART_INFO_OFS
and \rp, \rp, #0xff000000
ldr \rp, [\rp, \rv]
/* Select the UART to use based on the UART1 scratchpad value */
cmp \rp, #0 @ no port configured?
beq 21f @ if none, try to use UART1
cmp \rp, #OMAP2UART1 @ OMAP2/3/4UART1
beq 21f @ configure OMAP2/3/4UART1
cmp \rp, #OMAP2UART2 @ OMAP2/3/4UART2
beq 22f @ configure OMAP2/3/4UART2
cmp \rp, #OMAP2UART3 @ only on 24xx
beq 23f @ configure OMAP2UART3
cmp \rp, #OMAP3UART3 @ only on 34xx
beq 33f @ configure OMAP3UART3
cmp \rp, #OMAP4UART3 @ only on 44xx
beq 43f @ configure OMAP4UART3
cmp \rp, #OMAP3UART4 @ only on 36xx
beq 34f @ configure OMAP3UART4
cmp \rp, #OMAP4UART4 @ only on 44xx
beq 44f @ configure OMAP4UART4
cmp \rp, #TI81XXUART1 @ ti81Xx UART offsets different
beq 81f @ configure UART1
cmp \rp, #TI81XXUART2 @ ti81Xx UART offsets different
beq 82f @ configure UART2
cmp \rp, #TI81XXUART3 @ ti81Xx UART offsets different
beq 83f @ configure UART3
cmp \rp, #ZOOM_UART @ only on zoom2/3
beq 95f @ configure ZOOM_UART
/* Configure the UART offset from the phys/virt base */
21: mov \rp, #UART_OFFSET(OMAP2_UART1_BASE) @ omap2/3/4
b 98f
22: mov \rp, #UART_OFFSET(OMAP2_UART2_BASE) @ omap2/3/4
b 98f
23: mov \rp, #UART_OFFSET(OMAP2_UART3_BASE)
b 98f
33: mov \rp, #UART_OFFSET(OMAP3_UART1_BASE)
add \rp, \rp, #0x00fb0000
add \rp, \rp, #0x00006000 @ OMAP3_UART3_BASE
b 98f
34: mov \rp, #UART_OFFSET(OMAP3_UART1_BASE)
add \rp, \rp, #0x00fb0000
add \rp, \rp, #0x00028000 @ OMAP3_UART4_BASE
b 98f
43: mov \rp, #UART_OFFSET(OMAP4_UART3_BASE)
b 98f
44: mov \rp, #UART_OFFSET(OMAP4_UART4_BASE)
b 98f
81: mov \rp, #UART_OFFSET(TI81XX_UART1_BASE)
b 98f
82: mov \rp, #UART_OFFSET(TI81XX_UART2_BASE)
b 98f
83: mov \rp, #UART_OFFSET(TI81XX_UART3_BASE)
b 98f
95: ldr \rp, =ZOOM_UART_BASE
str \rp, [\tmp, #0] @ omap_uart_phys
ldr \rp, =ZOOM_UART_VIRT
str \rp, [\tmp, #4] @ omap_uart_virt
mov \rp, #(UART_LSR << ZOOM_PORT_SHIFT)
str \rp, [\tmp, #8] @ omap_uart_lsr
b 10b
/* Store both phys and virt address for the uart */
98: add \rp, \rp, #0x48000000 @ phys base
str \rp, [\tmp, #0] @ omap_uart_phys
sub \rp, \rp, #0x48000000 @ phys base
add \rp, \rp, #0xfa000000 @ virt base
str \rp, [\tmp, #4] @ omap_uart_virt
mov \rp, #(UART_LSR << OMAP_PORT_SHIFT)
str \rp, [\tmp, #8] @ omap_uart_lsr
b 10b
.align
99: .word .
.word omap_uart_phys
.ltorg
100: /* Pass the UART_LSR reg address */
ldr \tmp, [\tmp, #8] @ omap_uart_lsr
add \rp, \rp, \tmp
add \rv, \rv, \tmp
.endm
.macro senduart,rd,rx
orr \rd, \rd, \rx, lsl #24 @ preserve LSR reg offset
bic \rx, \rx, #0xff @ get base (THR) reg address
strb \rd, [\rx] @ send lower byte of rd
orr \rx, \rx, \rd, lsr #24 @ restore original rx (LSR)
bic \rd, \rd, #(0xff << 24) @ restore original rd
.endm
.macro busyuart,rd,rx
1001: ldrb \rd, [\rx] @ rx contains UART_LSR address
and \rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
teq \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
bne 1001b
.endm
.macro waituart,rd,rx
.endm