blob: a4cd273b2a679d0d5c4952d6a576149658570cdd [file] [log] [blame]
* ARM PrimeCell PL330 DMA Controller
The ARM PrimeCell PL330 DMA controller can move blocks of memory contents
between memory and peripherals or memory to memory.
Required properties:
- compatible: should include both "arm,pl330" and "arm,primecell".
- reg: physical base address of the controller and length of memory mapped
region.
- interrupts: interrupt number to the cpu.
Example:
pdma0: pdma@12680000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x12680000 0x1000>;
interrupts = <99>;
};
Client drivers (device nodes requiring dma transfers from dev-to-mem or
mem-to-dev) should specify the DMA channel numbers using a two-value pair
as shown below.
[property name] = <[phandle of the dma controller] [dma request id]>;
where 'dma request id' is the dma request number which is connected
to the client controller. The 'property name' is recommended to be
of the form <name>-dma-channel.
Example: tx-dma-channel = <&pdma0 12>;