| /* |
| * drivers/pci/pci-driver.c |
| * |
| * (C) Copyright 2002-2004, 2007 Greg Kroah-Hartman <greg@kroah.com> |
| * (C) Copyright 2007 Novell Inc. |
| * |
| * Released under the GPL v2 only. |
| * |
| */ |
| |
| #include <linux/pci.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/device.h> |
| #include <linux/mempolicy.h> |
| #include <linux/string.h> |
| #include <linux/slab.h> |
| #include <linux/sched.h> |
| #include <linux/cpu.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/suspend.h> |
| #include "pci.h" |
| |
| struct pci_dynid { |
| struct list_head node; |
| struct pci_device_id id; |
| }; |
| |
| /** |
| * pci_add_dynid - add a new PCI device ID to this driver and re-probe devices |
| * @drv: target pci driver |
| * @vendor: PCI vendor ID |
| * @device: PCI device ID |
| * @subvendor: PCI subvendor ID |
| * @subdevice: PCI subdevice ID |
| * @class: PCI class |
| * @class_mask: PCI class mask |
| * @driver_data: private driver data |
| * |
| * Adds a new dynamic pci device ID to this driver and causes the |
| * driver to probe for all devices again. @drv must have been |
| * registered prior to calling this function. |
| * |
| * CONTEXT: |
| * Does GFP_KERNEL allocation. |
| * |
| * RETURNS: |
| * 0 on success, -errno on failure. |
| */ |
| int pci_add_dynid(struct pci_driver *drv, |
| unsigned int vendor, unsigned int device, |
| unsigned int subvendor, unsigned int subdevice, |
| unsigned int class, unsigned int class_mask, |
| unsigned long driver_data) |
| { |
| struct pci_dynid *dynid; |
| int retval; |
| |
| dynid = kzalloc(sizeof(*dynid), GFP_KERNEL); |
| if (!dynid) |
| return -ENOMEM; |
| |
| dynid->id.vendor = vendor; |
| dynid->id.device = device; |
| dynid->id.subvendor = subvendor; |
| dynid->id.subdevice = subdevice; |
| dynid->id.class = class; |
| dynid->id.class_mask = class_mask; |
| dynid->id.driver_data = driver_data; |
| |
| spin_lock(&drv->dynids.lock); |
| list_add_tail(&dynid->node, &drv->dynids.list); |
| spin_unlock(&drv->dynids.lock); |
| |
| get_driver(&drv->driver); |
| retval = driver_attach(&drv->driver); |
| put_driver(&drv->driver); |
| |
| return retval; |
| } |
| |
| static void pci_free_dynids(struct pci_driver *drv) |
| { |
| struct pci_dynid *dynid, *n; |
| |
| spin_lock(&drv->dynids.lock); |
| list_for_each_entry_safe(dynid, n, &drv->dynids.list, node) { |
| list_del(&dynid->node); |
| kfree(dynid); |
| } |
| spin_unlock(&drv->dynids.lock); |
| } |
| |
| /* |
| * Dynamic device ID manipulation via sysfs is disabled for !CONFIG_HOTPLUG |
| */ |
| #ifdef CONFIG_HOTPLUG |
| /** |
| * store_new_id - sysfs frontend to pci_add_dynid() |
| * @driver: target device driver |
| * @buf: buffer for scanning device ID data |
| * @count: input size |
| * |
| * Allow PCI IDs to be added to an existing driver via sysfs. |
| */ |
| static ssize_t |
| store_new_id(struct device_driver *driver, const char *buf, size_t count) |
| { |
| struct pci_driver *pdrv = to_pci_driver(driver); |
| const struct pci_device_id *ids = pdrv->id_table; |
| __u32 vendor, device, subvendor=PCI_ANY_ID, |
| subdevice=PCI_ANY_ID, class=0, class_mask=0; |
| unsigned long driver_data=0; |
| int fields=0; |
| int retval; |
| |
| fields = sscanf(buf, "%x %x %x %x %x %x %lx", |
| &vendor, &device, &subvendor, &subdevice, |
| &class, &class_mask, &driver_data); |
| if (fields < 2) |
| return -EINVAL; |
| |
| /* Only accept driver_data values that match an existing id_table |
| entry */ |
| if (ids) { |
| retval = -EINVAL; |
| while (ids->vendor || ids->subvendor || ids->class_mask) { |
| if (driver_data == ids->driver_data) { |
| retval = 0; |
| break; |
| } |
| ids++; |
| } |
| if (retval) /* No match */ |
| return retval; |
| } |
| |
| retval = pci_add_dynid(pdrv, vendor, device, subvendor, subdevice, |
| class, class_mask, driver_data); |
| if (retval) |
| return retval; |
| return count; |
| } |
| static DRIVER_ATTR(new_id, S_IWUSR, NULL, store_new_id); |
| |
| /** |
| * store_remove_id - remove a PCI device ID from this driver |
| * @driver: target device driver |
| * @buf: buffer for scanning device ID data |
| * @count: input size |
| * |
| * Removes a dynamic pci device ID to this driver. |
| */ |
| static ssize_t |
| store_remove_id(struct device_driver *driver, const char *buf, size_t count) |
| { |
| struct pci_dynid *dynid, *n; |
| struct pci_driver *pdrv = to_pci_driver(driver); |
| __u32 vendor, device, subvendor = PCI_ANY_ID, |
| subdevice = PCI_ANY_ID, class = 0, class_mask = 0; |
| int fields = 0; |
| int retval = -ENODEV; |
| |
| fields = sscanf(buf, "%x %x %x %x %x %x", |
| &vendor, &device, &subvendor, &subdevice, |
| &class, &class_mask); |
| if (fields < 2) |
| return -EINVAL; |
| |
| spin_lock(&pdrv->dynids.lock); |
| list_for_each_entry_safe(dynid, n, &pdrv->dynids.list, node) { |
| struct pci_device_id *id = &dynid->id; |
| if ((id->vendor == vendor) && |
| (id->device == device) && |
| (subvendor == PCI_ANY_ID || id->subvendor == subvendor) && |
| (subdevice == PCI_ANY_ID || id->subdevice == subdevice) && |
| !((id->class ^ class) & class_mask)) { |
| list_del(&dynid->node); |
| kfree(dynid); |
| retval = 0; |
| break; |
| } |
| } |
| spin_unlock(&pdrv->dynids.lock); |
| |
| if (retval) |
| return retval; |
| return count; |
| } |
| static DRIVER_ATTR(remove_id, S_IWUSR, NULL, store_remove_id); |
| |
| static int |
| pci_create_newid_file(struct pci_driver *drv) |
| { |
| int error = 0; |
| if (drv->probe != NULL) |
| error = driver_create_file(&drv->driver, &driver_attr_new_id); |
| return error; |
| } |
| |
| static void pci_remove_newid_file(struct pci_driver *drv) |
| { |
| driver_remove_file(&drv->driver, &driver_attr_new_id); |
| } |
| |
| static int |
| pci_create_removeid_file(struct pci_driver *drv) |
| { |
| int error = 0; |
| if (drv->probe != NULL) |
| error = driver_create_file(&drv->driver,&driver_attr_remove_id); |
| return error; |
| } |
| |
| static void pci_remove_removeid_file(struct pci_driver *drv) |
| { |
| driver_remove_file(&drv->driver, &driver_attr_remove_id); |
| } |
| #else /* !CONFIG_HOTPLUG */ |
| static inline int pci_create_newid_file(struct pci_driver *drv) |
| { |
| return 0; |
| } |
| static inline void pci_remove_newid_file(struct pci_driver *drv) {} |
| static inline int pci_create_removeid_file(struct pci_driver *drv) |
| { |
| return 0; |
| } |
| static inline void pci_remove_removeid_file(struct pci_driver *drv) {} |
| #endif |
| |
| /** |
| * pci_match_id - See if a pci device matches a given pci_id table |
| * @ids: array of PCI device id structures to search in |
| * @dev: the PCI device structure to match against. |
| * |
| * Used by a driver to check whether a PCI device present in the |
| * system is in its list of supported devices. Returns the matching |
| * pci_device_id structure or %NULL if there is no match. |
| * |
| * Deprecated, don't use this as it will not catch any dynamic ids |
| * that a driver might want to check for. |
| */ |
| const struct pci_device_id *pci_match_id(const struct pci_device_id *ids, |
| struct pci_dev *dev) |
| { |
| if (ids) { |
| while (ids->vendor || ids->subvendor || ids->class_mask) { |
| if (pci_match_one_device(ids, dev)) |
| return ids; |
| ids++; |
| } |
| } |
| return NULL; |
| } |
| |
| /** |
| * pci_match_device - Tell if a PCI device structure has a matching PCI device id structure |
| * @drv: the PCI driver to match against |
| * @dev: the PCI device structure to match against |
| * |
| * Used by a driver to check whether a PCI device present in the |
| * system is in its list of supported devices. Returns the matching |
| * pci_device_id structure or %NULL if there is no match. |
| */ |
| static const struct pci_device_id *pci_match_device(struct pci_driver *drv, |
| struct pci_dev *dev) |
| { |
| struct pci_dynid *dynid; |
| |
| /* Look at the dynamic ids first, before the static ones */ |
| spin_lock(&drv->dynids.lock); |
| list_for_each_entry(dynid, &drv->dynids.list, node) { |
| if (pci_match_one_device(&dynid->id, dev)) { |
| spin_unlock(&drv->dynids.lock); |
| return &dynid->id; |
| } |
| } |
| spin_unlock(&drv->dynids.lock); |
| |
| return pci_match_id(drv->id_table, dev); |
| } |
| |
| struct drv_dev_and_id { |
| struct pci_driver *drv; |
| struct pci_dev *dev; |
| const struct pci_device_id *id; |
| }; |
| |
| static long local_pci_probe(void *_ddi) |
| { |
| struct drv_dev_and_id *ddi = _ddi; |
| struct device *dev = &ddi->dev->dev; |
| int rc; |
| |
| /* Unbound PCI devices are always set to disabled and suspended. |
| * During probe, the device is set to enabled and active and the |
| * usage count is incremented. If the driver supports runtime PM, |
| * it should call pm_runtime_put_noidle() in its probe routine and |
| * pm_runtime_get_noresume() in its remove routine. |
| */ |
| pm_runtime_get_noresume(dev); |
| pm_runtime_set_active(dev); |
| pm_runtime_enable(dev); |
| |
| rc = ddi->drv->probe(ddi->dev, ddi->id); |
| if (rc) { |
| pm_runtime_disable(dev); |
| pm_runtime_set_suspended(dev); |
| pm_runtime_put_noidle(dev); |
| } |
| return rc; |
| } |
| |
| static int pci_call_probe(struct pci_driver *drv, struct pci_dev *dev, |
| const struct pci_device_id *id) |
| { |
| int error, node; |
| struct drv_dev_and_id ddi = { drv, dev, id }; |
| |
| /* Execute driver initialization on node where the device's |
| bus is attached to. This way the driver likely allocates |
| its local memory on the right node without any need to |
| change it. */ |
| node = dev_to_node(&dev->dev); |
| if (node >= 0) { |
| int cpu; |
| |
| get_online_cpus(); |
| cpu = cpumask_any_and(cpumask_of_node(node), cpu_online_mask); |
| if (cpu < nr_cpu_ids) |
| error = work_on_cpu(cpu, local_pci_probe, &ddi); |
| else |
| error = local_pci_probe(&ddi); |
| put_online_cpus(); |
| } else |
| error = local_pci_probe(&ddi); |
| return error; |
| } |
| |
| /** |
| * __pci_device_probe - check if a driver wants to claim a specific PCI device |
| * @drv: driver to call to check if it wants the PCI device |
| * @pci_dev: PCI device being probed |
| * |
| * returns 0 on success, else error. |
| * side-effect: pci_dev->driver is set to drv when drv claims pci_dev. |
| */ |
| static int |
| __pci_device_probe(struct pci_driver *drv, struct pci_dev *pci_dev) |
| { |
| const struct pci_device_id *id; |
| int error = 0; |
| |
| if (!pci_dev->driver && drv->probe) { |
| error = -ENODEV; |
| |
| id = pci_match_device(drv, pci_dev); |
| if (id) |
| error = pci_call_probe(drv, pci_dev, id); |
| if (error >= 0) { |
| pci_dev->driver = drv; |
| error = 0; |
| } |
| } |
| return error; |
| } |
| |
| static int pci_device_probe(struct device * dev) |
| { |
| int error = 0; |
| struct pci_driver *drv; |
| struct pci_dev *pci_dev; |
| |
| drv = to_pci_driver(dev->driver); |
| pci_dev = to_pci_dev(dev); |
| pci_dev_get(pci_dev); |
| error = __pci_device_probe(drv, pci_dev); |
| if (error) |
| pci_dev_put(pci_dev); |
| |
| return error; |
| } |
| |
| static int pci_device_remove(struct device * dev) |
| { |
| struct pci_dev * pci_dev = to_pci_dev(dev); |
| struct pci_driver * drv = pci_dev->driver; |
| |
| if (drv) { |
| if (drv->remove) { |
| pm_runtime_get_sync(dev); |
| drv->remove(pci_dev); |
| pm_runtime_put_noidle(dev); |
| } |
| pci_dev->driver = NULL; |
| } |
| |
| /* Undo the runtime PM settings in local_pci_probe() */ |
| pm_runtime_disable(dev); |
| pm_runtime_set_suspended(dev); |
| pm_runtime_put_noidle(dev); |
| |
| /* |
| * If the device is still on, set the power state as "unknown", |
| * since it might change by the next time we load the driver. |
| */ |
| if (pci_dev->current_state == PCI_D0) |
| pci_dev->current_state = PCI_UNKNOWN; |
| |
| /* |
| * We would love to complain here if pci_dev->is_enabled is set, that |
| * the driver should have called pci_disable_device(), but the |
| * unfortunate fact is there are too many odd BIOS and bridge setups |
| * that don't like drivers doing that all of the time. |
| * Oh well, we can dream of sane hardware when we sleep, no matter how |
| * horrible the crap we have to deal with is when we are awake... |
| */ |
| |
| pci_dev_put(pci_dev); |
| return 0; |
| } |
| |
| static void pci_device_shutdown(struct device *dev) |
| { |
| struct pci_dev *pci_dev = to_pci_dev(dev); |
| struct pci_driver *drv = pci_dev->driver; |
| |
| if (drv && drv->shutdown) |
| drv->shutdown(pci_dev); |
| pci_msi_shutdown(pci_dev); |
| pci_msix_shutdown(pci_dev); |
| } |
| |
| #ifdef CONFIG_PM |
| |
| /* Auxiliary functions used for system resume and run-time resume. */ |
| |
| /** |
| * pci_restore_standard_config - restore standard config registers of PCI device |
| * @pci_dev: PCI device to handle |
| */ |
| static int pci_restore_standard_config(struct pci_dev *pci_dev) |
| { |
| pci_update_current_state(pci_dev, PCI_UNKNOWN); |
| |
| if (pci_dev->current_state != PCI_D0) { |
| int error = pci_set_power_state(pci_dev, PCI_D0); |
| if (error) |
| return error; |
| } |
| |
| pci_restore_state(pci_dev); |
| return 0; |
| } |
| |
| static void pci_pm_default_resume_early(struct pci_dev *pci_dev) |
| { |
| pci_restore_standard_config(pci_dev); |
| pci_fixup_device(pci_fixup_resume_early, pci_dev); |
| } |
| |
| #endif |
| |
| #ifdef CONFIG_PM_SLEEP |
| |
| /* |
| * Default "suspend" method for devices that have no driver provided suspend, |
| * or not even a driver at all (second part). |
| */ |
| static void pci_pm_set_unknown_state(struct pci_dev *pci_dev) |
| { |
| /* |
| * mark its power state as "unknown", since we don't know if |
| * e.g. the BIOS will change its device state when we suspend. |
| */ |
| if (pci_dev->current_state == PCI_D0) |
| pci_dev->current_state = PCI_UNKNOWN; |
| } |
| |
| /* |
| * Default "resume" method for devices that have no driver provided resume, |
| * or not even a driver at all (second part). |
| */ |
| static int pci_pm_reenable_device(struct pci_dev *pci_dev) |
| { |
| int retval; |
| |
| /* if the device was enabled before suspend, reenable */ |
| retval = pci_reenable_device(pci_dev); |
| /* |
| * if the device was busmaster before the suspend, make it busmaster |
| * again |
| */ |
| if (pci_dev->is_busmaster) |
| pci_set_master(pci_dev); |
| |
| return retval; |
| } |
| |
| static int pci_legacy_suspend(struct device *dev, pm_message_t state) |
| { |
| struct pci_dev * pci_dev = to_pci_dev(dev); |
| struct pci_driver * drv = pci_dev->driver; |
| |
| if (drv && drv->suspend) { |
| pci_power_t prev = pci_dev->current_state; |
| int error; |
| |
| error = drv->suspend(pci_dev, state); |
| suspend_report_result(drv->suspend, error); |
| if (error) |
| return error; |
| |
| if (!pci_dev->state_saved && pci_dev->current_state != PCI_D0 |
| && pci_dev->current_state != PCI_UNKNOWN) { |
| WARN_ONCE(pci_dev->current_state != prev, |
| "PCI PM: Device state not saved by %pF\n", |
| drv->suspend); |
| } |
| } |
| |
| pci_fixup_device(pci_fixup_suspend, pci_dev); |
| |
| return 0; |
| } |
| |
| static int pci_legacy_suspend_late(struct device *dev, pm_message_t state) |
| { |
| struct pci_dev * pci_dev = to_pci_dev(dev); |
| struct pci_driver * drv = pci_dev->driver; |
| |
| if (drv && drv->suspend_late) { |
| pci_power_t prev = pci_dev->current_state; |
| int error; |
| |
| error = drv->suspend_late(pci_dev, state); |
| suspend_report_result(drv->suspend_late, error); |
| if (error) |
| return error; |
| |
| if (!pci_dev->state_saved && pci_dev->current_state != PCI_D0 |
| && pci_dev->current_state != PCI_UNKNOWN) { |
| WARN_ONCE(pci_dev->current_state != prev, |
| "PCI PM: Device state not saved by %pF\n", |
| drv->suspend_late); |
| return 0; |
| } |
| } |
| |
| if (!pci_dev->state_saved) |
| pci_save_state(pci_dev); |
| |
| pci_pm_set_unknown_state(pci_dev); |
| |
| return 0; |
| } |
| |
| static int pci_legacy_resume_early(struct device *dev) |
| { |
| struct pci_dev * pci_dev = to_pci_dev(dev); |
| struct pci_driver * drv = pci_dev->driver; |
| |
| return drv && drv->resume_early ? |
| drv->resume_early(pci_dev) : 0; |
| } |
| |
| static int pci_legacy_resume(struct device *dev) |
| { |
| struct pci_dev * pci_dev = to_pci_dev(dev); |
| struct pci_driver * drv = pci_dev->driver; |
| |
| pci_fixup_device(pci_fixup_resume, pci_dev); |
| |
| return drv && drv->resume ? |
| drv->resume(pci_dev) : pci_pm_reenable_device(pci_dev); |
| } |
| |
| /* Auxiliary functions used by the new power management framework */ |
| |
| static void pci_pm_default_resume(struct pci_dev *pci_dev) |
| { |
| pci_fixup_device(pci_fixup_resume, pci_dev); |
| |
| if (!pci_is_bridge(pci_dev)) |
| pci_enable_wake(pci_dev, PCI_D0, false); |
| } |
| |
| static void pci_pm_default_suspend(struct pci_dev *pci_dev) |
| { |
| /* Disable non-bridge devices without PM support */ |
| if (!pci_is_bridge(pci_dev)) |
| pci_disable_enabled_device(pci_dev); |
| } |
| |
| static bool pci_has_legacy_pm_support(struct pci_dev *pci_dev) |
| { |
| struct pci_driver *drv = pci_dev->driver; |
| bool ret = drv && (drv->suspend || drv->suspend_late || drv->resume |
| || drv->resume_early); |
| |
| /* |
| * Legacy PM support is used by default, so warn if the new framework is |
| * supported as well. Drivers are supposed to support either the |
| * former, or the latter, but not both at the same time. |
| */ |
| WARN(ret && drv->driver.pm, "driver %s device %04x:%04x\n", |
| drv->name, pci_dev->vendor, pci_dev->device); |
| |
| return ret; |
| } |
| |
| /* New power management framework */ |
| |
| static int pci_pm_prepare(struct device *dev) |
| { |
| struct device_driver *drv = dev->driver; |
| int error = 0; |
| |
| /* |
| * If a PCI device configured to wake up the system from sleep states |
| * has been suspended at run time and there's a resume request pending |
| * for it, this is equivalent to the device signaling wakeup, so the |
| * system suspend operation should be aborted. |
| */ |
| pm_runtime_get_noresume(dev); |
| if (pm_runtime_barrier(dev) && device_may_wakeup(dev)) |
| pm_wakeup_event(dev, 0); |
| |
| if (pm_wakeup_pending()) { |
| pm_runtime_put_sync(dev); |
| return -EBUSY; |
| } |
| |
| /* |
| * PCI devices suspended at run time need to be resumed at this |
| * point, because in general it is necessary to reconfigure them for |
| * system suspend. Namely, if the device is supposed to wake up the |
| * system from the sleep state, we may need to reconfigure it for this |
| * purpose. In turn, if the device is not supposed to wake up the |
| * system from the sleep state, we'll have to prevent it from signaling |
| * wake-up. |
| */ |
| pm_runtime_resume(dev); |
| |
| if (drv && drv->pm && drv->pm->prepare) |
| error = drv->pm->prepare(dev); |
| |
| return error; |
| } |
| |
| static void pci_pm_complete(struct device *dev) |
| { |
| struct device_driver *drv = dev->driver; |
| |
| if (drv && drv->pm && drv->pm->complete) |
| drv->pm->complete(dev); |
| |
| pm_runtime_put_sync(dev); |
| } |
| |
| #else /* !CONFIG_PM_SLEEP */ |
| |
| #define pci_pm_prepare NULL |
| #define pci_pm_complete NULL |
| |
| #endif /* !CONFIG_PM_SLEEP */ |
| |
| #ifdef CONFIG_SUSPEND |
| |
| static int pci_pm_suspend(struct device *dev) |
| { |
| struct pci_dev *pci_dev = to_pci_dev(dev); |
| const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; |
| |
| if (pci_has_legacy_pm_support(pci_dev)) |
| return pci_legacy_suspend(dev, PMSG_SUSPEND); |
| |
| if (!pm) { |
| pci_pm_default_suspend(pci_dev); |
| goto Fixup; |
| } |
| |
| if (pm->suspend) { |
| pci_power_t prev = pci_dev->current_state; |
| int error; |
| |
| error = pm->suspend(dev); |
| suspend_report_result(pm->suspend, error); |
| if (error) |
| return error; |
| |
| if (!pci_dev->state_saved && pci_dev->current_state != PCI_D0 |
| && pci_dev->current_state != PCI_UNKNOWN) { |
| WARN_ONCE(pci_dev->current_state != prev, |
| "PCI PM: State of device not saved by %pF\n", |
| pm->suspend); |
| } |
| } |
| |
| Fixup: |
| pci_fixup_device(pci_fixup_suspend, pci_dev); |
| |
| return 0; |
| } |
| |
| static int pci_pm_suspend_noirq(struct device *dev) |
| { |
| struct pci_dev *pci_dev = to_pci_dev(dev); |
| const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; |
| |
| if (pci_has_legacy_pm_support(pci_dev)) |
| return pci_legacy_suspend_late(dev, PMSG_SUSPEND); |
| |
| if (!pm) { |
| pci_save_state(pci_dev); |
| return 0; |
| } |
| |
| if (pm->suspend_noirq) { |
| pci_power_t prev = pci_dev->current_state; |
| int error; |
| |
| error = pm->suspend_noirq(dev); |
| suspend_report_result(pm->suspend_noirq, error); |
| if (error) |
| return error; |
| |
| if (!pci_dev->state_saved && pci_dev->current_state != PCI_D0 |
| && pci_dev->current_state != PCI_UNKNOWN) { |
| WARN_ONCE(pci_dev->current_state != prev, |
| "PCI PM: State of device not saved by %pF\n", |
| pm->suspend_noirq); |
| return 0; |
| } |
| } |
| |
| if (!pci_dev->state_saved) { |
| pci_save_state(pci_dev); |
| if (!pci_is_bridge(pci_dev)) |
| pci_prepare_to_sleep(pci_dev); |
| } |
| |
| pci_pm_set_unknown_state(pci_dev); |
| |
| return 0; |
| } |
| |
| static int pci_pm_resume_noirq(struct device *dev) |
| { |
| struct pci_dev *pci_dev = to_pci_dev(dev); |
| struct device_driver *drv = dev->driver; |
| int error = 0; |
| |
| pci_pm_default_resume_early(pci_dev); |
| |
| if (pci_has_legacy_pm_support(pci_dev)) |
| return pci_legacy_resume_early(dev); |
| |
| if (drv && drv->pm && drv->pm->resume_noirq) |
| error = drv->pm->resume_noirq(dev); |
| |
| return error; |
| } |
| |
| static int pci_pm_resume(struct device *dev) |
| { |
| struct pci_dev *pci_dev = to_pci_dev(dev); |
| const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; |
| int error = 0; |
| |
| /* |
| * This is necessary for the suspend error path in which resume is |
| * called without restoring the standard config registers of the device. |
| */ |
| if (pci_dev->state_saved) |
| pci_restore_standard_config(pci_dev); |
| |
| if (pci_has_legacy_pm_support(pci_dev)) |
| return pci_legacy_resume(dev); |
| |
| pci_pm_default_resume(pci_dev); |
| |
| if (pm) { |
| if (pm->resume) |
| error = pm->resume(dev); |
| } else { |
| pci_pm_reenable_device(pci_dev); |
| } |
| |
| return error; |
| } |
| |
| #else /* !CONFIG_SUSPEND */ |
| |
| #define pci_pm_suspend NULL |
| #define pci_pm_suspend_noirq NULL |
| #define pci_pm_resume NULL |
| #define pci_pm_resume_noirq NULL |
| |
| #endif /* !CONFIG_SUSPEND */ |
| |
| #ifdef CONFIG_HIBERNATE_CALLBACKS |
| |
| static int pci_pm_freeze(struct device *dev) |
| { |
| struct pci_dev *pci_dev = to_pci_dev(dev); |
| const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; |
| |
| if (pci_has_legacy_pm_support(pci_dev)) |
| return pci_legacy_suspend(dev, PMSG_FREEZE); |
| |
| if (!pm) { |
| pci_pm_default_suspend(pci_dev); |
| return 0; |
| } |
| |
| if (pm->freeze) { |
| int error; |
| |
| error = pm->freeze(dev); |
| suspend_report_result(pm->freeze, error); |
| if (error) |
| return error; |
| } |
| |
| return 0; |
| } |
| |
| static int pci_pm_freeze_noirq(struct device *dev) |
| { |
| struct pci_dev *pci_dev = to_pci_dev(dev); |
| struct device_driver *drv = dev->driver; |
| |
| if (pci_has_legacy_pm_support(pci_dev)) |
| return pci_legacy_suspend_late(dev, PMSG_FREEZE); |
| |
| if (drv && drv->pm && drv->pm->freeze_noirq) { |
| int error; |
| |
| error = drv->pm->freeze_noirq(dev); |
| suspend_report_result(drv->pm->freeze_noirq, error); |
| if (error) |
| return error; |
| } |
| |
| if (!pci_dev->state_saved) |
| pci_save_state(pci_dev); |
| |
| pci_pm_set_unknown_state(pci_dev); |
| |
| return 0; |
| } |
| |
| static int pci_pm_thaw_noirq(struct device *dev) |
| { |
| struct pci_dev *pci_dev = to_pci_dev(dev); |
| struct device_driver *drv = dev->driver; |
| int error = 0; |
| |
| if (pci_has_legacy_pm_support(pci_dev)) |
| return pci_legacy_resume_early(dev); |
| |
| pci_update_current_state(pci_dev, PCI_D0); |
| |
| if (drv && drv->pm && drv->pm->thaw_noirq) |
| error = drv->pm->thaw_noirq(dev); |
| |
| return error; |
| } |
| |
| static int pci_pm_thaw(struct device *dev) |
| { |
| struct pci_dev *pci_dev = to_pci_dev(dev); |
| const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; |
| int error = 0; |
| |
| if (pci_has_legacy_pm_support(pci_dev)) |
| return pci_legacy_resume(dev); |
| |
| if (pm) { |
| if (pm->thaw) |
| error = pm->thaw(dev); |
| } else { |
| pci_pm_reenable_device(pci_dev); |
| } |
| |
| pci_dev->state_saved = false; |
| |
| return error; |
| } |
| |
| static int pci_pm_poweroff(struct device *dev) |
| { |
| struct pci_dev *pci_dev = to_pci_dev(dev); |
| const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; |
| |
| if (pci_has_legacy_pm_support(pci_dev)) |
| return pci_legacy_suspend(dev, PMSG_HIBERNATE); |
| |
| if (!pm) { |
| pci_pm_default_suspend(pci_dev); |
| goto Fixup; |
| } |
| |
| if (pm->poweroff) { |
| int error; |
| |
| error = pm->poweroff(dev); |
| suspend_report_result(pm->poweroff, error); |
| if (error) |
| return error; |
| } |
| |
| Fixup: |
| pci_fixup_device(pci_fixup_suspend, pci_dev); |
| |
| return 0; |
| } |
| |
| static int pci_pm_poweroff_noirq(struct device *dev) |
| { |
| struct pci_dev *pci_dev = to_pci_dev(dev); |
| struct device_driver *drv = dev->driver; |
| |
| if (pci_has_legacy_pm_support(to_pci_dev(dev))) |
| return pci_legacy_suspend_late(dev, PMSG_HIBERNATE); |
| |
| if (!drv || !drv->pm) |
| return 0; |
| |
| if (drv->pm->poweroff_noirq) { |
| int error; |
| |
| error = drv->pm->poweroff_noirq(dev); |
| suspend_report_result(drv->pm->poweroff_noirq, error); |
| if (error) |
| return error; |
| } |
| |
| if (!pci_dev->state_saved && !pci_is_bridge(pci_dev)) |
| pci_prepare_to_sleep(pci_dev); |
| |
| return 0; |
| } |
| |
| static int pci_pm_restore_noirq(struct device *dev) |
| { |
| struct pci_dev *pci_dev = to_pci_dev(dev); |
| struct device_driver *drv = dev->driver; |
| int error = 0; |
| |
| pci_pm_default_resume_early(pci_dev); |
| |
| if (pci_has_legacy_pm_support(pci_dev)) |
| return pci_legacy_resume_early(dev); |
| |
| if (drv && drv->pm && drv->pm->restore_noirq) |
| error = drv->pm->restore_noirq(dev); |
| |
| return error; |
| } |
| |
| static int pci_pm_restore(struct device *dev) |
| { |
| struct pci_dev *pci_dev = to_pci_dev(dev); |
| const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; |
| int error = 0; |
| |
| /* |
| * This is necessary for the hibernation error path in which restore is |
| * called without restoring the standard config registers of the device. |
| */ |
| if (pci_dev->state_saved) |
| pci_restore_standard_config(pci_dev); |
| |
| if (pci_has_legacy_pm_support(pci_dev)) |
| return pci_legacy_resume(dev); |
| |
| pci_pm_default_resume(pci_dev); |
| |
| if (pm) { |
| if (pm->restore) |
| error = pm->restore(dev); |
| } else { |
| pci_pm_reenable_device(pci_dev); |
| } |
| |
| return error; |
| } |
| |
| #else /* !CONFIG_HIBERNATE_CALLBACKS */ |
| |
| #define pci_pm_freeze NULL |
| #define pci_pm_freeze_noirq NULL |
| #define pci_pm_thaw NULL |
| #define pci_pm_thaw_noirq NULL |
| #define pci_pm_poweroff NULL |
| #define pci_pm_poweroff_noirq NULL |
| #define pci_pm_restore NULL |
| #define pci_pm_restore_noirq NULL |
| |
| #endif /* !CONFIG_HIBERNATE_CALLBACKS */ |
| |
| #ifdef CONFIG_PM_RUNTIME |
| |
| static int pci_pm_runtime_suspend(struct device *dev) |
| { |
| struct pci_dev *pci_dev = to_pci_dev(dev); |
| const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; |
| pci_power_t prev = pci_dev->current_state; |
| int error; |
| |
| if (!pm || !pm->runtime_suspend) |
| return -ENOSYS; |
| |
| error = pm->runtime_suspend(dev); |
| suspend_report_result(pm->runtime_suspend, error); |
| if (error) |
| return error; |
| |
| pci_fixup_device(pci_fixup_suspend, pci_dev); |
| |
| if (!pci_dev->state_saved && pci_dev->current_state != PCI_D0 |
| && pci_dev->current_state != PCI_UNKNOWN) { |
| WARN_ONCE(pci_dev->current_state != prev, |
| "PCI PM: State of device not saved by %pF\n", |
| pm->runtime_suspend); |
| return 0; |
| } |
| |
| if (!pci_dev->state_saved) |
| pci_save_state(pci_dev); |
| |
| pci_finish_runtime_suspend(pci_dev); |
| |
| return 0; |
| } |
| |
| static int pci_pm_runtime_resume(struct device *dev) |
| { |
| struct pci_dev *pci_dev = to_pci_dev(dev); |
| const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; |
| |
| if (!pm || !pm->runtime_resume) |
| return -ENOSYS; |
| |
| pci_pm_default_resume_early(pci_dev); |
| __pci_enable_wake(pci_dev, PCI_D0, true, false); |
| pci_fixup_device(pci_fixup_resume, pci_dev); |
| |
| return pm->runtime_resume(dev); |
| } |
| |
| static int pci_pm_runtime_idle(struct device *dev) |
| { |
| const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; |
| |
| if (!pm) |
| return -ENOSYS; |
| |
| if (pm->runtime_idle) { |
| int ret = pm->runtime_idle(dev); |
| if (ret) |
| return ret; |
| } |
| |
| pm_runtime_suspend(dev); |
| |
| return 0; |
| } |
| |
| #else /* !CONFIG_PM_RUNTIME */ |
| |
| #define pci_pm_runtime_suspend NULL |
| #define pci_pm_runtime_resume NULL |
| #define pci_pm_runtime_idle NULL |
| |
| #endif /* !CONFIG_PM_RUNTIME */ |
| |
| #ifdef CONFIG_PM |
| |
| const struct dev_pm_ops pci_dev_pm_ops = { |
| .prepare = pci_pm_prepare, |
| .complete = pci_pm_complete, |
| .suspend = pci_pm_suspend, |
| .resume = pci_pm_resume, |
| .freeze = pci_pm_freeze, |
| .thaw = pci_pm_thaw, |
| .poweroff = pci_pm_poweroff, |
| .restore = pci_pm_restore, |
| .suspend_noirq = pci_pm_suspend_noirq, |
| .resume_noirq = pci_pm_resume_noirq, |
| .freeze_noirq = pci_pm_freeze_noirq, |
| .thaw_noirq = pci_pm_thaw_noirq, |
| .poweroff_noirq = pci_pm_poweroff_noirq, |
| .restore_noirq = pci_pm_restore_noirq, |
| .runtime_suspend = pci_pm_runtime_suspend, |
| .runtime_resume = pci_pm_runtime_resume, |
| .runtime_idle = pci_pm_runtime_idle, |
| }; |
| |
| #define PCI_PM_OPS_PTR (&pci_dev_pm_ops) |
| |
| #else /* !COMFIG_PM_OPS */ |
| |
| #define PCI_PM_OPS_PTR NULL |
| |
| #endif /* !COMFIG_PM_OPS */ |
| |
| /** |
| * __pci_register_driver - register a new pci driver |
| * @drv: the driver structure to register |
| * @owner: owner module of drv |
| * @mod_name: module name string |
| * |
| * Adds the driver structure to the list of registered drivers. |
| * Returns a negative value on error, otherwise 0. |
| * If no error occurred, the driver remains registered even if |
| * no device was claimed during registration. |
| */ |
| int __pci_register_driver(struct pci_driver *drv, struct module *owner, |
| const char *mod_name) |
| { |
| int error; |
| |
| /* initialize common driver fields */ |
| drv->driver.name = drv->name; |
| drv->driver.bus = &pci_bus_type; |
| drv->driver.owner = owner; |
| drv->driver.mod_name = mod_name; |
| |
| spin_lock_init(&drv->dynids.lock); |
| INIT_LIST_HEAD(&drv->dynids.list); |
| |
| /* register with core */ |
| error = driver_register(&drv->driver); |
| if (error) |
| goto out; |
| |
| error = pci_create_newid_file(drv); |
| if (error) |
| goto out_newid; |
| |
| error = pci_create_removeid_file(drv); |
| if (error) |
| goto out_removeid; |
| out: |
| return error; |
| |
| out_removeid: |
| pci_remove_newid_file(drv); |
| out_newid: |
| driver_unregister(&drv->driver); |
| goto out; |
| } |
| |
| /** |
| * pci_unregister_driver - unregister a pci driver |
| * @drv: the driver structure to unregister |
| * |
| * Deletes the driver structure from the list of registered PCI drivers, |
| * gives it a chance to clean up by calling its remove() function for |
| * each device it was responsible for, and marks those devices as |
| * driverless. |
| */ |
| |
| void |
| pci_unregister_driver(struct pci_driver *drv) |
| { |
| pci_remove_removeid_file(drv); |
| pci_remove_newid_file(drv); |
| driver_unregister(&drv->driver); |
| pci_free_dynids(drv); |
| } |
| |
| static struct pci_driver pci_compat_driver = { |
| .name = "compat" |
| }; |
| |
| /** |
| * pci_dev_driver - get the pci_driver of a device |
| * @dev: the device to query |
| * |
| * Returns the appropriate pci_driver structure or %NULL if there is no |
| * registered driver for the device. |
| */ |
| struct pci_driver * |
| pci_dev_driver(const struct pci_dev *dev) |
| { |
| if (dev->driver) |
| return dev->driver; |
| else { |
| int i; |
| for(i=0; i<=PCI_ROM_RESOURCE; i++) |
| if (dev->resource[i].flags & IORESOURCE_BUSY) |
| return &pci_compat_driver; |
| } |
| return NULL; |
| } |
| |
| /** |
| * pci_bus_match - Tell if a PCI device structure has a matching PCI device id structure |
| * @dev: the PCI device structure to match against |
| * @drv: the device driver to search for matching PCI device id structures |
| * |
| * Used by a driver to check whether a PCI device present in the |
| * system is in its list of supported devices. Returns the matching |
| * pci_device_id structure or %NULL if there is no match. |
| */ |
| static int pci_bus_match(struct device *dev, struct device_driver *drv) |
| { |
| struct pci_dev *pci_dev = to_pci_dev(dev); |
| struct pci_driver *pci_drv = to_pci_driver(drv); |
| const struct pci_device_id *found_id; |
| |
| found_id = pci_match_device(pci_drv, pci_dev); |
| if (found_id) |
| return 1; |
| |
| return 0; |
| } |
| |
| /** |
| * pci_dev_get - increments the reference count of the pci device structure |
| * @dev: the device being referenced |
| * |
| * Each live reference to a device should be refcounted. |
| * |
| * Drivers for PCI devices should normally record such references in |
| * their probe() methods, when they bind to a device, and release |
| * them by calling pci_dev_put(), in their disconnect() methods. |
| * |
| * A pointer to the device with the incremented reference counter is returned. |
| */ |
| struct pci_dev *pci_dev_get(struct pci_dev *dev) |
| { |
| if (dev) |
| get_device(&dev->dev); |
| return dev; |
| } |
| |
| /** |
| * pci_dev_put - release a use of the pci device structure |
| * @dev: device that's been disconnected |
| * |
| * Must be called when a user of a device is finished with it. When the last |
| * user of the device calls this function, the memory of the device is freed. |
| */ |
| void pci_dev_put(struct pci_dev *dev) |
| { |
| if (dev) |
| put_device(&dev->dev); |
| } |
| |
| #ifndef CONFIG_HOTPLUG |
| int pci_uevent(struct device *dev, struct kobj_uevent_env *env) |
| { |
| return -ENODEV; |
| } |
| #endif |
| |
| struct bus_type pci_bus_type = { |
| .name = "pci", |
| .match = pci_bus_match, |
| .uevent = pci_uevent, |
| .probe = pci_device_probe, |
| .remove = pci_device_remove, |
| .shutdown = pci_device_shutdown, |
| .dev_attrs = pci_dev_attrs, |
| .bus_attrs = pci_bus_attrs, |
| .pm = PCI_PM_OPS_PTR, |
| }; |
| |
| static int __init pci_driver_init(void) |
| { |
| return bus_register(&pci_bus_type); |
| } |
| |
| postcore_initcall(pci_driver_init); |
| |
| EXPORT_SYMBOL_GPL(pci_add_dynid); |
| EXPORT_SYMBOL(pci_match_id); |
| EXPORT_SYMBOL(__pci_register_driver); |
| EXPORT_SYMBOL(pci_unregister_driver); |
| EXPORT_SYMBOL(pci_dev_driver); |
| EXPORT_SYMBOL(pci_bus_type); |
| EXPORT_SYMBOL(pci_dev_get); |
| EXPORT_SYMBOL(pci_dev_put); |