| /* |
| * Amiga Gayle IDE Driver |
| * |
| * Created 9 Jul 1997 by Geert Uytterhoeven |
| * |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file COPYING in the main directory of this archive for |
| * more details. |
| */ |
| |
| #include <linux/types.h> |
| #include <linux/mm.h> |
| #include <linux/interrupt.h> |
| #include <linux/blkdev.h> |
| #include <linux/ide.h> |
| #include <linux/init.h> |
| #include <linux/zorro.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| |
| #include <asm/setup.h> |
| #include <asm/amigahw.h> |
| #include <asm/amigaints.h> |
| #include <asm/amigayle.h> |
| |
| |
| /* |
| * Offsets from one of the above bases |
| */ |
| |
| #define GAYLE_CONTROL 0x101a |
| |
| /* |
| * These are at different offsets from the base |
| */ |
| |
| #define GAYLE_IRQ_4000 0xdd3020 /* MSB = 1, Harddisk is source of */ |
| #define GAYLE_IRQ_1200 0xda9000 /* interrupt */ |
| |
| |
| /* |
| * Offset of the secondary port for IDE doublers |
| * Note that GAYLE_CONTROL is NOT available then! |
| */ |
| |
| #define GAYLE_NEXT_PORT 0x1000 |
| |
| #define GAYLE_NUM_HWIFS 2 |
| #define GAYLE_NUM_PROBE_HWIFS (ide_doubler ? GAYLE_NUM_HWIFS : \ |
| GAYLE_NUM_HWIFS-1) |
| #define GAYLE_HAS_CONTROL_REG (!ide_doubler) |
| |
| static bool ide_doubler; |
| module_param_named(doubler, ide_doubler, bool, 0); |
| MODULE_PARM_DESC(doubler, "enable support for IDE doublers"); |
| |
| /* |
| * Check and acknowledge the interrupt status |
| */ |
| |
| static int gayle_test_irq(ide_hwif_t *hwif) |
| { |
| unsigned char ch; |
| |
| ch = z_readb(hwif->io_ports.irq_addr); |
| if (!(ch & GAYLE_IRQ_IDE)) |
| return 0; |
| return 1; |
| } |
| |
| static void gayle_a1200_clear_irq(ide_drive_t *drive) |
| { |
| ide_hwif_t *hwif = drive->hwif; |
| |
| (void)z_readb(hwif->io_ports.status_addr); |
| z_writeb(0x7c, hwif->io_ports.irq_addr); |
| } |
| |
| static void __init gayle_setup_ports(struct ide_hw *hw, unsigned long base, |
| unsigned long ctl, unsigned long irq_port) |
| { |
| int i; |
| |
| memset(hw, 0, sizeof(*hw)); |
| |
| hw->io_ports.data_addr = base; |
| |
| for (i = 1; i < 8; i++) |
| hw->io_ports_array[i] = base + 2 + i * 4; |
| |
| hw->io_ports.ctl_addr = ctl; |
| hw->io_ports.irq_addr = irq_port; |
| |
| hw->irq = IRQ_AMIGA_PORTS; |
| } |
| |
| static const struct ide_port_ops gayle_a4000_port_ops = { |
| .test_irq = gayle_test_irq, |
| }; |
| |
| static const struct ide_port_ops gayle_a1200_port_ops = { |
| .clear_irq = gayle_a1200_clear_irq, |
| .test_irq = gayle_test_irq, |
| }; |
| |
| static const struct ide_port_info gayle_port_info = { |
| .host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_SERIALIZE | |
| IDE_HFLAG_NO_DMA, |
| .irq_flags = IRQF_SHARED, |
| .chipset = ide_generic, |
| }; |
| |
| /* |
| * Probe for a Gayle IDE interface (and optionally for an IDE doubler) |
| */ |
| |
| static int __init amiga_gayle_ide_probe(struct platform_device *pdev) |
| { |
| struct resource *res; |
| struct gayle_ide_platform_data *pdata; |
| unsigned long base, ctrlport, irqport; |
| unsigned int i; |
| int error; |
| struct ide_hw hw[GAYLE_NUM_HWIFS], *hws[GAYLE_NUM_HWIFS]; |
| struct ide_port_info d = gayle_port_info; |
| struct ide_host *host; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!res) |
| return -ENODEV; |
| |
| if (!request_mem_region(res->start, resource_size(res), "IDE")) |
| return -EBUSY; |
| |
| pdata = pdev->dev.platform_data; |
| pr_info("ide: Gayle IDE controller (A%u style%s)\n", |
| pdata->explicit_ack ? 1200 : 4000, |
| ide_doubler ? ", IDE doubler" : ""); |
| |
| base = (unsigned long)ZTWO_VADDR(pdata->base); |
| ctrlport = 0; |
| irqport = (unsigned long)ZTWO_VADDR(pdata->irqport); |
| if (pdata->explicit_ack) |
| d.port_ops = &gayle_a1200_port_ops; |
| else |
| d.port_ops = &gayle_a4000_port_ops; |
| |
| for (i = 0; i < GAYLE_NUM_PROBE_HWIFS; i++, base += GAYLE_NEXT_PORT) { |
| if (GAYLE_HAS_CONTROL_REG) |
| ctrlport = base + GAYLE_CONTROL; |
| |
| gayle_setup_ports(&hw[i], base, ctrlport, irqport); |
| hws[i] = &hw[i]; |
| } |
| |
| error = ide_host_add(&d, hws, i, &host); |
| if (error) |
| goto out; |
| |
| platform_set_drvdata(pdev, host); |
| return 0; |
| |
| out: |
| release_mem_region(res->start, resource_size(res)); |
| return error; |
| } |
| |
| static int __exit amiga_gayle_ide_remove(struct platform_device *pdev) |
| { |
| struct ide_host *host = platform_get_drvdata(pdev); |
| struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| |
| ide_host_remove(host); |
| release_mem_region(res->start, resource_size(res)); |
| return 0; |
| } |
| |
| static struct platform_driver amiga_gayle_ide_driver = { |
| .remove = __exit_p(amiga_gayle_ide_remove), |
| .driver = { |
| .name = "amiga-gayle-ide", |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| static int __init amiga_gayle_ide_init(void) |
| { |
| return platform_driver_probe(&amiga_gayle_ide_driver, |
| amiga_gayle_ide_probe); |
| } |
| |
| module_init(amiga_gayle_ide_init); |
| |
| static void __exit amiga_gayle_ide_exit(void) |
| { |
| platform_driver_unregister(&amiga_gayle_ide_driver); |
| } |
| |
| module_exit(amiga_gayle_ide_exit); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:amiga-gayle-ide"); |