| /* |
| * SBC8548 Device Tree Source |
| * |
| * Copyright 2007 Wind River Systems Inc. |
| * |
| * Paul Gortmaker (see MAINTAINERS for contact information) |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| |
| /dts-v1/; |
| |
| / { |
| model = "SBC8548"; |
| compatible = "SBC8548"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| aliases { |
| ethernet0 = &enet0; |
| ethernet1 = &enet1; |
| serial0 = &serial0; |
| serial1 = &serial1; |
| pci0 = &pci0; |
| pci1 = &pci1; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| PowerPC,8548@0 { |
| device_type = "cpu"; |
| reg = <0>; |
| d-cache-line-size = <0x20>; // 32 bytes |
| i-cache-line-size = <0x20>; // 32 bytes |
| d-cache-size = <0x8000>; // L1, 32K |
| i-cache-size = <0x8000>; // L1, 32K |
| timebase-frequency = <0>; // From uboot |
| bus-frequency = <0>; |
| clock-frequency = <0>; |
| next-level-cache = <&L2>; |
| }; |
| }; |
| |
| memory { |
| device_type = "memory"; |
| reg = <0x00000000 0x10000000>; |
| }; |
| |
| localbus@e0000000 { |
| #address-cells = <2>; |
| #size-cells = <1>; |
| compatible = "simple-bus"; |
| reg = <0xe0000000 0x5000>; |
| interrupt-parent = <&mpic>; |
| |
| ranges = <0x0 0x0 0xff800000 0x00800000 /*8MB Flash*/ |
| 0x3 0x0 0xf0000000 0x04000000 /*64MB SDRAM*/ |
| 0x4 0x0 0xf4000000 0x04000000 /*64MB SDRAM*/ |
| 0x5 0x0 0xf8000000 0x00b10000 /* EPLD */ |
| 0x6 0x0 0xfb800000 0x04000000>; /*64MB Flash*/ |
| |
| |
| flash@0,0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "cfi-flash"; |
| reg = <0x0 0x0 0x800000>; |
| bank-width = <1>; |
| device-width = <1>; |
| partition@0x0 { |
| label = "space"; |
| reg = <0x00000000 0x00100000>; |
| }; |
| partition@0x100000 { |
| label = "bootloader"; |
| reg = <0x00100000 0x00700000>; |
| read-only; |
| }; |
| }; |
| |
| epld@5,0 { |
| compatible = "wrs,epld-localbus"; |
| #address-cells = <2>; |
| #size-cells = <1>; |
| reg = <0x5 0x0 0x00b10000>; |
| ranges = < |
| 0x0 0x0 0x5 0x000000 0x1fff /* LED */ |
| 0x1 0x0 0x5 0x100000 0x1fff /* Switches */ |
| 0x3 0x0 0x5 0x300000 0x1fff /* HW Rev. */ |
| 0xb 0x0 0x5 0xb00000 0x1fff /* EEPROM */ |
| >; |
| |
| led@0,0 { |
| compatible = "led"; |
| reg = <0x0 0x0 0x1fff>; |
| }; |
| |
| switches@1,0 { |
| compatible = "switches"; |
| reg = <0x1 0x0 0x1fff>; |
| }; |
| |
| hw-rev@3,0 { |
| compatible = "hw-rev"; |
| reg = <0x3 0x0 0x1fff>; |
| }; |
| |
| eeprom@b,0 { |
| compatible = "eeprom"; |
| reg = <0xb 0 0x1fff>; |
| }; |
| |
| }; |
| |
| alt-flash@6,0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x6 0x0 0x04000000>; |
| compatible = "cfi-flash"; |
| bank-width = <4>; |
| device-width = <1>; |
| partition@0x0 { |
| label = "bootloader"; |
| reg = <0x00000000 0x00100000>; |
| read-only; |
| }; |
| partition@0x00100000 { |
| label = "file-system"; |
| reg = <0x00100000 0x01f00000>; |
| }; |
| partition@0x02000000 { |
| label = "boot-config"; |
| reg = <0x02000000 0x00100000>; |
| }; |
| partition@0x02100000 { |
| label = "space"; |
| reg = <0x02100000 0x01f00000>; |
| }; |
| }; |
| }; |
| |
| soc8548@e0000000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| device_type = "soc"; |
| ranges = <0x00000000 0xe0000000 0x00100000>; |
| bus-frequency = <0>; |
| compatible = "simple-bus"; |
| |
| ecm-law@0 { |
| compatible = "fsl,ecm-law"; |
| reg = <0x0 0x1000>; |
| fsl,num-laws = <10>; |
| }; |
| |
| ecm@1000 { |
| compatible = "fsl,mpc8548-ecm", "fsl,ecm"; |
| reg = <0x1000 0x1000>; |
| interrupts = <17 2>; |
| interrupt-parent = <&mpic>; |
| }; |
| |
| memory-controller@2000 { |
| compatible = "fsl,mpc8548-memory-controller"; |
| reg = <0x2000 0x1000>; |
| interrupt-parent = <&mpic>; |
| interrupts = <0x12 0x2>; |
| }; |
| |
| L2: l2-cache-controller@20000 { |
| compatible = "fsl,mpc8548-l2-cache-controller"; |
| reg = <0x20000 0x1000>; |
| cache-line-size = <0x20>; // 32 bytes |
| cache-size = <0x80000>; // L2, 512K |
| interrupt-parent = <&mpic>; |
| interrupts = <0x10 0x2>; |
| }; |
| |
| i2c@3000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| cell-index = <0>; |
| compatible = "fsl-i2c"; |
| reg = <0x3000 0x100>; |
| interrupts = <0x2b 0x2>; |
| interrupt-parent = <&mpic>; |
| dfsrr; |
| }; |
| |
| i2c@3100 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| cell-index = <1>; |
| compatible = "fsl-i2c"; |
| reg = <0x3100 0x100>; |
| interrupts = <0x2b 0x2>; |
| interrupt-parent = <&mpic>; |
| dfsrr; |
| }; |
| |
| dma@21300 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma"; |
| reg = <0x21300 0x4>; |
| ranges = <0x0 0x21100 0x200>; |
| cell-index = <0>; |
| dma-channel@0 { |
| compatible = "fsl,mpc8548-dma-channel", |
| "fsl,eloplus-dma-channel"; |
| reg = <0x0 0x80>; |
| cell-index = <0>; |
| interrupt-parent = <&mpic>; |
| interrupts = <20 2>; |
| }; |
| dma-channel@80 { |
| compatible = "fsl,mpc8548-dma-channel", |
| "fsl,eloplus-dma-channel"; |
| reg = <0x80 0x80>; |
| cell-index = <1>; |
| interrupt-parent = <&mpic>; |
| interrupts = <21 2>; |
| }; |
| dma-channel@100 { |
| compatible = "fsl,mpc8548-dma-channel", |
| "fsl,eloplus-dma-channel"; |
| reg = <0x100 0x80>; |
| cell-index = <2>; |
| interrupt-parent = <&mpic>; |
| interrupts = <22 2>; |
| }; |
| dma-channel@180 { |
| compatible = "fsl,mpc8548-dma-channel", |
| "fsl,eloplus-dma-channel"; |
| reg = <0x180 0x80>; |
| cell-index = <3>; |
| interrupt-parent = <&mpic>; |
| interrupts = <23 2>; |
| }; |
| }; |
| |
| enet0: ethernet@24000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| cell-index = <0>; |
| device_type = "network"; |
| model = "eTSEC"; |
| compatible = "gianfar"; |
| reg = <0x24000 0x1000>; |
| ranges = <0x0 0x24000 0x1000>; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>; |
| interrupt-parent = <&mpic>; |
| tbi-handle = <&tbi0>; |
| phy-handle = <&phy0>; |
| |
| mdio@520 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,gianfar-mdio"; |
| reg = <0x520 0x20>; |
| |
| phy0: ethernet-phy@19 { |
| interrupt-parent = <&mpic>; |
| interrupts = <0x6 0x1>; |
| reg = <0x19>; |
| device_type = "ethernet-phy"; |
| }; |
| phy1: ethernet-phy@1a { |
| interrupt-parent = <&mpic>; |
| interrupts = <0x7 0x1>; |
| reg = <0x1a>; |
| device_type = "ethernet-phy"; |
| }; |
| tbi0: tbi-phy@11 { |
| reg = <0x11>; |
| device_type = "tbi-phy"; |
| }; |
| }; |
| }; |
| |
| enet1: ethernet@25000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| cell-index = <1>; |
| device_type = "network"; |
| model = "eTSEC"; |
| compatible = "gianfar"; |
| reg = <0x25000 0x1000>; |
| ranges = <0x0 0x25000 0x1000>; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>; |
| interrupt-parent = <&mpic>; |
| tbi-handle = <&tbi1>; |
| phy-handle = <&phy1>; |
| |
| mdio@520 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "fsl,gianfar-tbi"; |
| reg = <0x520 0x20>; |
| |
| tbi1: tbi-phy@11 { |
| reg = <0x11>; |
| device_type = "tbi-phy"; |
| }; |
| }; |
| }; |
| |
| serial0: serial@4500 { |
| cell-index = <0>; |
| device_type = "serial"; |
| compatible = "fsl,ns16550", "ns16550"; |
| reg = <0x4500 0x100>; // reg base, size |
| clock-frequency = <0>; // should we fill in in uboot? |
| interrupts = <0x2a 0x2>; |
| interrupt-parent = <&mpic>; |
| }; |
| |
| serial1: serial@4600 { |
| cell-index = <1>; |
| device_type = "serial"; |
| compatible = "fsl,ns16550", "ns16550"; |
| reg = <0x4600 0x100>; // reg base, size |
| clock-frequency = <0>; // should we fill in in uboot? |
| interrupts = <0x2a 0x2>; |
| interrupt-parent = <&mpic>; |
| }; |
| |
| global-utilities@e0000 { //global utilities reg |
| compatible = "fsl,mpc8548-guts"; |
| reg = <0xe0000 0x1000>; |
| fsl,has-rstcr; |
| }; |
| |
| crypto@30000 { |
| compatible = "fsl,sec2.1", "fsl,sec2.0"; |
| reg = <0x30000 0x10000>; |
| interrupts = <45 2>; |
| interrupt-parent = <&mpic>; |
| fsl,num-channels = <4>; |
| fsl,channel-fifo-len = <24>; |
| fsl,exec-units-mask = <0xfe>; |
| fsl,descriptor-types-mask = <0x12b0ebf>; |
| }; |
| |
| mpic: pic@40000 { |
| interrupt-controller; |
| #address-cells = <0>; |
| #interrupt-cells = <2>; |
| reg = <0x40000 0x40000>; |
| compatible = "chrp,open-pic"; |
| device_type = "open-pic"; |
| }; |
| }; |
| |
| pci0: pci@e0008000 { |
| interrupt-map-mask = <0xf800 0x0 0x0 0x7>; |
| interrupt-map = < |
| /* IDSEL 0x01 (PCI-X slot) @66MHz */ |
| 0x0800 0x0 0x0 0x1 &mpic 0x2 0x1 |
| 0x0800 0x0 0x0 0x2 &mpic 0x3 0x1 |
| 0x0800 0x0 0x0 0x3 &mpic 0x4 0x1 |
| 0x0800 0x0 0x0 0x4 &mpic 0x1 0x1 |
| |
| /* IDSEL 0x11 (PCI, 3.3V 32bit) @33MHz */ |
| 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1 |
| 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1 |
| 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1 |
| 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1>; |
| |
| interrupt-parent = <&mpic>; |
| interrupts = <0x18 0x2>; |
| bus-range = <0 0>; |
| ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x10000000 |
| 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00800000>; |
| clock-frequency = <66000000>; |
| #interrupt-cells = <1>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| reg = <0xe0008000 0x1000>; |
| compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci"; |
| device_type = "pci"; |
| }; |
| |
| pci1: pcie@e000a000 { |
| interrupt-map-mask = <0xf800 0x0 0x0 0x7>; |
| interrupt-map = < |
| |
| /* IDSEL 0x0 (PEX) */ |
| 0x0000 0x0 0x0 0x1 &mpic 0x0 0x1 |
| 0x0000 0x0 0x0 0x2 &mpic 0x1 0x1 |
| 0x0000 0x0 0x0 0x3 &mpic 0x2 0x1 |
| 0x0000 0x0 0x0 0x4 &mpic 0x3 0x1>; |
| |
| interrupt-parent = <&mpic>; |
| interrupts = <0x1a 0x2>; |
| bus-range = <0x0 0xff>; |
| ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000 |
| 0x01000000 0x0 0x00000000 0xe2800000 0x0 0x08000000>; |
| clock-frequency = <33000000>; |
| #interrupt-cells = <1>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| reg = <0xe000a000 0x1000>; |
| compatible = "fsl,mpc8548-pcie"; |
| device_type = "pci"; |
| pcie@0 { |
| reg = <0x0 0x0 0x0 0x0 0x0>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| device_type = "pci"; |
| ranges = <0x02000000 0x0 0xa0000000 |
| 0x02000000 0x0 0xa0000000 |
| 0x0 0x10000000 |
| |
| 0x01000000 0x0 0x00000000 |
| 0x01000000 0x0 0x00000000 |
| 0x0 0x00800000>; |
| }; |
| }; |
| }; |
