| /* |
| * Manroland mucmc52 board Device Tree Source |
| * |
| * Copyright (C) 2009 DENX Software Engineering GmbH |
| * Heiko Schocher <hs@denx.de> |
| * Copyright 2006-2007 Secret Lab Technologies Ltd. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| /include/ "mpc5200b.dtsi" |
| |
| / { |
| model = "manroland,mucmc52"; |
| compatible = "manroland,mucmc52"; |
| |
| soc5200@f0000000 { |
| gpt0: timer@600 { // GPT 0 in GPIO mode |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| gpt1: timer@610 { // General Purpose Timer in GPIO mode |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| gpt2: timer@620 { // General Purpose Timer in GPIO mode |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| gpt3: timer@630 { // General Purpose Timer in GPIO mode |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| timer@640 { |
| status = "disabled"; |
| }; |
| |
| timer@650 { |
| status = "disabled"; |
| }; |
| |
| timer@660 { |
| status = "disabled"; |
| }; |
| |
| timer@670 { |
| status = "disabled"; |
| }; |
| |
| rtc@800 { |
| status = "disabled"; |
| }; |
| |
| can@900 { |
| status = "disabled"; |
| }; |
| |
| can@980 { |
| status = "disabled"; |
| }; |
| |
| spi@f00 { |
| status = "disabled"; |
| }; |
| |
| usb@1000 { |
| status = "disabled"; |
| }; |
| |
| psc@2000 { // PSC1 |
| compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; |
| }; |
| |
| psc@2200 { // PSC2 |
| compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; |
| }; |
| |
| psc@2400 { // PSC3 |
| status = "disabled"; |
| }; |
| |
| psc@2600 { // PSC4 |
| status = "disabled"; |
| }; |
| |
| psc@2800 { // PSC5 |
| status = "disabled"; |
| }; |
| |
| psc@2c00 { // PSC6 |
| compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; |
| }; |
| |
| ethernet@3000 { |
| phy-handle = <&phy0>; |
| }; |
| |
| mdio@3000 { |
| phy0: ethernet-phy@0 { |
| compatible = "intel,lxt971"; |
| reg = <0>; |
| }; |
| }; |
| |
| i2c@3d00 { |
| status = "disabled"; |
| }; |
| |
| i2c@3d40 { |
| hwmon@2c { |
| compatible = "ad,adm9240"; |
| reg = <0x2c>; |
| }; |
| rtc@51 { |
| compatible = "nxp,pcf8563"; |
| reg = <0x51>; |
| }; |
| }; |
| }; |
| |
| pci@f0000d00 { |
| interrupt-map-mask = <0xf800 0 0 7>; |
| interrupt-map = < |
| /* IDSEL 0x10 */ |
| 0x8000 0 0 1 &mpc5200_pic 0 3 3 |
| 0x8000 0 0 2 &mpc5200_pic 0 3 3 |
| 0x8000 0 0 3 &mpc5200_pic 0 2 3 |
| 0x8000 0 0 4 &mpc5200_pic 0 1 3 |
| >; |
| ranges = <0x42000000 0 0x60000000 0x60000000 0 0x10000000 |
| 0x02000000 0 0x90000000 0x90000000 0 0x10000000 |
| 0x01000000 0 0x00000000 0xa0000000 0 0x01000000>; |
| }; |
| |
| localbus { |
| ranges = <0 0 0xff800000 0x00800000 |
| 1 0 0x80000000 0x00800000 |
| 3 0 0x80000000 0x00800000>; |
| |
| flash@0,0 { |
| compatible = "cfi-flash"; |
| reg = <0 0 0x00800000>; |
| bank-width = <4>; |
| device-width = <2>; |
| #size-cells = <1>; |
| #address-cells = <1>; |
| partition@0 { |
| label = "DTS"; |
| reg = <0x0 0x00100000>; |
| }; |
| partition@100000 { |
| label = "Kernel"; |
| reg = <0x100000 0x00200000>; |
| }; |
| partition@300000 { |
| label = "RootFS"; |
| reg = <0x00300000 0x00200000>; |
| }; |
| partition@500000 { |
| label = "user"; |
| reg = <0x00500000 0x00200000>; |
| }; |
| partition@700000 { |
| label = "U-Boot"; |
| reg = <0x00700000 0x00040000>; |
| }; |
| partition@740000 { |
| label = "Env"; |
| reg = <0x00740000 0x00020000>; |
| }; |
| partition@760000 { |
| label = "red. Env"; |
| reg = <0x00760000 0x00020000>; |
| }; |
| partition@780000 { |
| label = "reserve"; |
| reg = <0x00780000 0x00080000>; |
| }; |
| }; |
| |
| simple100: gpio-controller-100@3,600100 { |
| compatible = "manroland,mucmc52-aux-gpio"; |
| reg = <3 0x00600100 0x1>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| simple104: gpio-controller-104@3,600104 { |
| compatible = "manroland,mucmc52-aux-gpio"; |
| reg = <3 0x00600104 0x1>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| simple200: gpio-controller-200@3,600200 { |
| compatible = "manroland,mucmc52-aux-gpio"; |
| reg = <3 0x00600200 0x1>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| simple201: gpio-controller-201@3,600201 { |
| compatible = "manroland,mucmc52-aux-gpio"; |
| reg = <3 0x00600201 0x1>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| simple202: gpio-controller-202@3,600202 { |
| compatible = "manroland,mucmc52-aux-gpio"; |
| reg = <3 0x00600202 0x1>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| simple203: gpio-controller-203@3,600203 { |
| compatible = "manroland,mucmc52-aux-gpio"; |
| reg = <3 0x00600203 0x1>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| simple204: gpio-controller-204@3,600204 { |
| compatible = "manroland,mucmc52-aux-gpio"; |
| reg = <3 0x00600204 0x1>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| simple206: gpio-controller-206@3,600206 { |
| compatible = "manroland,mucmc52-aux-gpio"; |
| reg = <3 0x00600206 0x1>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| simple207: gpio-controller-207@3,600207 { |
| compatible = "manroland,mucmc52-aux-gpio"; |
| reg = <3 0x00600207 0x1>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| simple20f: gpio-controller-20f@3,60020f { |
| compatible = "manroland,mucmc52-aux-gpio"; |
| reg = <3 0x0060020f 0x1>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| }; |
| }; |