| # Copyright (c) 2013 The Linux Foundation. All rights reserved. |
| if ATH79 |
| |
| menu "Atheros AR71XX/AR724X/AR913X machine selection" |
| |
| config ATH79_MACH_ALFA_AP96 |
| bool "ALFA Network AP96 board support" |
| select SOC_AR71XX |
| select ATH79_DEV_ETH |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_SPI |
| select ATH79_DEV_USB |
| |
| config ATH79_MACH_HORNET_UB |
| bool "ALFA Network Hornet-UB board support" |
| select SOC_AR933X |
| select ATH79_DEV_ETH |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_M25P80 |
| select ATH79_DEV_USB |
| select ATH79_DEV_WMAC |
| |
| config ATH79_MACH_ALFA_NX |
| bool "ALFA Network N2/N5 board support" |
| select SOC_AR724X |
| select ATH79_DEV_AP9X_PCI if PCI |
| select ATH79_DEV_ETH |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_M25P80 |
| |
| config ATH79_MACH_ALL0258N |
| bool "Allnet ALL0258N support" |
| select SOC_AR724X |
| select ATH79_DEV_AP9X_PCI if PCI |
| select ATH79_DEV_ETH |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_M25P80 |
| |
| config ATH79_MACH_ALL0315N |
| bool "Allnet ALL0315N support" |
| select SOC_AR724X |
| select ATH79_DEV_AP9X_PCI if PCI |
| select ATH79_DEV_ETH |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_M25P80 |
| |
| config ATH79_MACH_AP113 |
| bool "Atheros AP113 board support" |
| select SOC_AR724X |
| select ATH79_DEV_M25P80 |
| select ATH79_DEV_PB9X_PCI if PCI |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_USB |
| select ATH79_DEV_ETH |
| |
| config ATH79_MACH_AP121 |
| bool "Atheros AP121 reference board" |
| select SOC_AR933X |
| select ATH79_DEV_ETH |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_M25P80 |
| select ATH79_DEV_USB |
| select ATH79_DEV_WMAC |
| help |
| Say 'Y' here if you want your kernel to support the |
| Atheros AP121 reference board. |
| |
| config ATH79_MACH_AP135 |
| bool "Atheros AP135 reference board" |
| select SOC_QCA955X |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_SPI |
| select ATH79_DEV_USB |
| select ATH79_DEV_WMAC |
| help |
| Say 'Y' here if you want your kernel to support the |
| Atheros AP135 reference board. |
| |
| config ATH79_MACH_AP135_DUAL |
| bool "Atheros AP135 Dual reference board" |
| select SOC_QCA955X |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_SPI |
| select ATH79_DEV_USB |
| select ATH79_DEV_NAND |
| select ATH79_DEV_WMAC |
| help |
| Say 'Y' here if you want your kernel to support the |
| Atheros AP135 Dual reference board. |
| |
| config ATH79_MACH_AP136 |
| bool "Atheros AP136 reference board" |
| select SOC_QCA955X |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_SPI |
| select ATH79_DEV_USB |
| select ATH79_DEV_WMAC |
| help |
| Say 'Y' here if you want your kernel to support the |
| Atheros AP136 reference board. |
| |
| config ATH79_MACH_AP143 |
| bool "Atheros AP143 reference board" |
| select SOC_QCA953X |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_SPI |
| select ATH79_DEV_USB |
| select ATH79_DEV_WMAC |
| select ATH79_DEV_ETH |
| select ATH79_DEV_M25P80 |
| help |
| Say 'Y' here if you want your kernel to support the |
| Atheros AP143 reference board. |
| |
| config ATH79_MACH_AP151 |
| bool "Atheros AP151 reference board" |
| select SOC_QCA956X |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_SPI |
| select ATH79_DEV_USB |
| select ATH79_DEV_WMAC |
| select ATH79_DEV_ETH |
| select ATH79_DEV_M25P80 |
| help |
| Say 'Y' here if you want your kernel to support the |
| Atheros AP151 reference board. |
| |
| config ATH79_MACH_AP147 |
| bool "Atheros AP147 reference board" |
| select SOC_QCA953X |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_SPI |
| select ATH79_DEV_USB |
| select ATH79_DEV_WMAC |
| select ATH79_DEV_ETH |
| select ATH79_DEV_M25P80 |
| help |
| Say 'Y' here if you want your kernel to support the |
| Atheros AP147 reference board. |
| |
| config ATH79_MACH_AP152 |
| bool "Atheros AP152 reference board" |
| select SOC_QCA956X |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_SPI |
| select ATH79_DEV_USB |
| select ATH79_DEV_WMAC |
| select ATH79_DEV_ETH |
| select ATH79_DEV_M25P80 |
| help |
| Say 'Y' here if you want your kernel to support the |
| Atheros AP152 reference board. |
| |
| config ATH79_MACH_AP81 |
| bool "Atheros AP81 reference board" |
| select SOC_AR913X |
| select ATH79_DEV_ETH |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_M25P80 |
| select ATH79_DEV_USB |
| select ATH79_DEV_WMAC |
| select USE_OF |
| help |
| Say 'Y' here if you want your kernel to support the |
| Atheros AP81 reference board. |
| |
| config ATH79_MACH_AP83 |
| bool "Atheros AP83 board support" |
| select SOC_AR913X |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_USB |
| select ATH79_DEV_WMAC |
| |
| config ATH79_MACH_AP96 |
| bool "Atheros AP96 board support" |
| select SOC_AR71XX |
| select ATH79_DEV_ETH |
| select ATH79_DEV_AP9X_PCI if PCI |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_M25P80 |
| select ATH79_DEV_USB |
| |
| config ATH79_MACH_CUS227 |
| bool "Qualcomm Atheros CUS227 support" |
| select SOC_AR934X |
| select ATH79_DEV_ETH |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_NAND |
| select ATH79_DEV_USB |
| select ATH79_DEV_WMAC |
| select ATH79_DEV_I2C |
| help |
| Say 'Y' here if you want your kernel to support the |
| Qualcomm Atheros CUS227 board. |
| |
| config ATH79_MACH_DB120 |
| bool "Atheros DB120 reference board" |
| select SOC_AR934X |
| select ATH79_DEV_AP9X_PCI if PCI |
| select ATH79_DEV_ETH |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_M25P80 |
| select ATH79_DEV_NFC |
| select ATH79_DEV_USB |
| select ATH79_DEV_WMAC |
| help |
| Say 'Y' here if you want your kernel to support the |
| Atheros DB120 reference board. |
| |
| config ATH79_MACH_DB120_TB388 |
| bool "Atheros DB120 reference board with TB388 extension" |
| select SOC_AR934X |
| select ATH79_DEV_AP9X_PCI if PCI |
| select ATH79_DEV_AUDIO |
| select ATH79_DEV_ETH |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_M25P80 |
| select ATH79_DEV_USB |
| select ATH79_DEV_WMAC |
| help |
| Say 'Y' here if you want your kernel to support the |
| Atheros DB120 reference board with TB388 extension. |
| |
| config ATH79_MACH_PB42 |
| bool "Atheros PB42 board support" |
| select SOC_AR71XX |
| select ATH79_DEV_ETH |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_M25P80 |
| |
| config ATH79_MACH_PB44 |
| bool "Atheros PB44 reference board" |
| select SOC_AR71XX |
| select ATH79_DEV_ETH |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_SPI |
| select ATH79_DEV_USB |
| help |
| Say 'Y' here if you want your kernel to support the |
| Atheros PB44 reference board. |
| |
| config ATH79_MACH_PB92 |
| bool "Atheros PB92 board support" |
| select SOC_AR724X |
| select ATH79_DEV_ETH |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_PB9X_PCI if PCI |
| select ATH79_DEV_USB |
| |
| config ATH79_MACH_RUBBERDUCK |
| bool "Qualcomm-Atheros RubberDuck board support" |
| select SOC_QCA955X |
| select ATH79_DEV_SPI |
| help |
| Say 'Y' here if you want your kernel to support the |
| RubberDuck custom design support. |
| |
| config ATH79_MACH_GENERIC_DT |
| bool "Qualcomm Atheros reference boards with device tree" |
| select SOC_AR913X |
| select SOC_AR933X |
| select SOC_AR934X |
| select SOC_QCA955X |
| select ATH79_DEV_AP9X_PCI if PCI |
| select ATH79_DEV_ETH |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_M25P80 |
| select ATH79_DEV_NFC |
| select ATH79_DEV_USB |
| select ATH79_DEV_WMAC |
| help |
| Say 'Y' here if you want your kernel to support the |
| Qualcomm Atheros reference boards with device tree. |
| |
| config ATH79_MACH_AW_NR580 |
| bool "AzureWave AW-NR580 board support" |
| select SOC_AR71XX |
| select ATH79_DEV_ETH |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_M25P80 |
| |
| config ATH79_MACH_WHR_HP_G300N |
| bool "Buffalo WHR-HP-G300N board support" |
| select SOC_AR724X |
| select ATH79_DEV_ETH |
| select ATH79_DEV_AP9X_PCI if PCI |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_M25P80 |
| |
| config ATH79_MACH_WLAE_AG300N |
| bool "Buffalo WLAE-AG300N board support" |
| select SOC_AR71XX |
| select ATH79_DEV_ETH |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_M25P80 |
| |
| config ATH79_MACH_WZR_HP_AG300H |
| bool "Buffalo WZR-HP-AG300H board support" |
| select SOC_AR71XX |
| select ATH79_DEV_ETH |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_M25P80 |
| select ATH79_DEV_USB |
| |
| config ATH79_MACH_WZR_HP_G300NH |
| bool "Buffalo WZR-HP-G300NH board support" |
| select SOC_AR913X |
| select ATH79_DEV_ETH |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_USB |
| select ATH79_DEV_WMAC |
| select RTL8366_SMI |
| |
| config ATH79_MACH_WZR_HP_G300NH2 |
| bool "Buffalo WZR-HP-G300NH2 board support" |
| select SOC_AR724X |
| select ATH79_DEV_AP9X_PCI if PCI |
| select ATH79_DEV_ETH |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_M25P80 |
| select ATH79_DEV_USB |
| |
| config ATH79_MACH_WZR_HP_G450H |
| bool "Buffalo WZR-HP-G450H board support" |
| select SOC_AR724X |
| select ATH79_DEV_ETH |
| select ATH79_DEV_AP9X_PCI if PCI |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_M25P80 |
| select ATH79_DEV_USB |
| |
| config ATH79_MACH_WP543 |
| bool "Compex WP543/WPJ543 board support" |
| select SOC_AR71XX |
| select ATH79_DEV_ETH |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_M25P80 |
| select ATH79_DEV_USB |
| select MYLOADER |
| |
| config ATH79_MACH_WPE72 |
| bool "Compex WPE72/WPE72NX board support" |
| select SOC_AR724X |
| select ATH79_DEV_ETH |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_M25P80 |
| select ATH79_DEV_USB |
| select MYLOADER |
| |
| config ATH79_MACH_DIR_600_A1 |
| bool "D-Link DIR-600 A1/DIR-615 E4 support" |
| select SOC_AR724X |
| select ATH79_DEV_AP9X_PCI if PCI |
| select ATH79_DEV_ETH |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_M25P80 |
| select ATH79_NVRAM |
| |
| config ATH79_MACH_DIR_615_C1 |
| bool "D-Link DIR-615 rev. C1 support" |
| select SOC_AR913X |
| select ATH79_DEV_ETH |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_M25P80 |
| select ATH79_DEV_WMAC |
| select ATH79_NVRAM |
| |
| config ATH79_MACH_DIR_825_B1 |
| bool "D-Link DIR-825 rev. B1 board support" |
| select SOC_AR71XX |
| select ATH79_DEV_ETH |
| select ATH79_DEV_AP9X_PCI if PCI |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_M25P80 |
| select ATH79_DEV_USB |
| |
| config ATH79_MACH_EW_DORIN |
| bool "embedded wireless Dorin Platform support" |
| select SOC_AR933X |
| select ATH79_DEV_M25P80 |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_WMAC |
| select ATH79_DEV_ETH |
| help |
| Say 'Y' here if you want your kernel to support the |
| Dorin Platform from www.80211.de . |
| |
| config ATH79_MACH_JA76PF |
| bool "jjPlus JA76PF board support" |
| select SOC_AR71XX |
| select ATH79_DEV_ETH |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_M25P80 |
| select ATH79_DEV_USB |
| |
| config ATH79_MACH_JWAP003 |
| bool "jjPlus JWAP003 board support" |
| select SOC_AR71XX |
| select ATH79_DEV_ETH |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_M25P80 |
| select ATH79_DEV_USB |
| |
| config ATH79_MACH_WRT160NL |
| bool "Linksys WRT160NL board support" |
| select SOC_AR913X |
| select ATH79_DEV_ETH |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_M25P80 |
| select ATH79_DEV_USB |
| select ATH79_DEV_WMAC |
| select ATH79_NVRAM |
| |
| config ATH79_MACH_WRT400N |
| bool "Linksys WRT400N board support" |
| select SOC_AR71XX |
| select ATH79_DEV_ETH |
| select ATH79_DEV_AP9X_PCI if PCI |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_M25P80 |
| |
| config ATH79_MACH_RB4XX |
| bool "MikroTik RouterBOARD 4xx series support" |
| select SOC_AR71XX |
| select ATH79_DEV_ETH |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_USB |
| |
| config ATH79_MACH_RB750 |
| bool "MikroTik RouterBOARD 750 support" |
| select SOC_AR724X |
| select ATH79_DEV_ETH |
| select ATH79_DEV_AP9X_PCI if PCI |
| select ATH79_DEV_USB |
| select ATH79_ROUTERBOOT |
| select RLE_DECOMPRESS |
| |
| config ATH79_MACH_RB2011 |
| bool "MikroTik RouterBOARD 2011 support" |
| select SOC_AR934x |
| select ATH79_DEV_ETH |
| select ATH79_DEV_NFC |
| select ATH79_DEV_WMAC |
| select ATH79_ROUTERBOOT |
| |
| config ATH79_MACH_WNDR3700 |
| bool "NETGEAR WNDR3700 board support" |
| select SOC_AR71XX |
| select ATH79_DEV_AP9X_PCI if PCI |
| select ATH79_DEV_ETH |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_M25P80 |
| select ATH79_DEV_USB |
| |
| config ATH79_MACH_WNR2000 |
| bool "NETGEAR WNR2000 board support" |
| select SOC_AR913X |
| select ATH79_DEV_ETH |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_M25P80 |
| select ATH79_DEV_WMAC |
| |
| config ATH79_MACH_OM2P |
| bool "OpenMesh OM2P board support" |
| select SOC_AR724X |
| select SOC_AR933X |
| select ATH79_DEV_AP9X_PCI if PCI |
| select ATH79_DEV_ETH |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_M25P80 |
| select ATH79_DEV_WMAC |
| |
| config ATH79_MACH_MR600 |
| bool "OpenMesh MR600 board support" |
| select SOC_AR934X |
| select ATH79_DEV_AP9X_PCI if PCI |
| select ATH79_DEV_ETH |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_M25P80 |
| select ATH79_DEV_WMAC |
| |
| config ATH79_MACH_MZK_W04NU |
| bool "Planex MZK-W04NU board support" |
| select SOC_AR913X |
| select ATH79_DEV_ETH |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_M25P80 |
| select ATH79_DEV_USB |
| select ATH79_DEV_WMAC |
| |
| config ATH79_MACH_MZK_W300NH |
| bool "Planex MZK-W300NH board support" |
| select SOC_AR913X |
| select ATH79_DEV_ETH |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_M25P80 |
| select ATH79_DEV_WMAC |
| |
| config ATH79_MACH_RW2458N |
| bool "Redwave RW2458N board support" |
| select SOC_AR724X |
| select ATH79_DEV_ETH |
| select ATH79_DEV_AP9X_PCI if PCI |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_M25P80 |
| select ATH79_DEV_USB |
| |
| config ATH79_MACH_CAP4200AG |
| bool "Senao CAP4200AG support" |
| select SOC_AR934X |
| select ATH79_DEV_AP9X_PCI if PCI |
| select ATH79_DEV_ETH |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_M25P80 |
| select ATH79_DEV_WMAC |
| |
| config ATH79_MACH_EAP7660D |
| bool "Senao EAP7660D support" |
| select SOC_AR71XX |
| select ATH79_DEV_ETH |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_M25P80 |
| |
| config ATH79_MACH_TL_MR11U |
| bool "TP-LINK TL-MR11U/TL-MR3040 support" |
| select SOC_AR933X |
| select ATH79_DEV_ETH |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_M25P80 |
| select ATH79_DEV_USB |
| select ATH79_DEV_WMAC |
| |
| config ATH79_MACH_TL_MR3020 |
| bool "TP-LINK TL-MR3020 support" |
| select SOC_AR933X |
| select ATH79_DEV_ETH |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_M25P80 |
| select ATH79_DEV_USB |
| select ATH79_DEV_WMAC |
| |
| config ATH79_MACH_TL_MR3X20 |
| bool "TP-LINK TL-MR3220/3420 support" |
| select SOC_AR724X |
| select ATH79_DEV_AP9X_PCI if PCI |
| select ATH79_DEV_ETH |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_M25P80 |
| select ATH79_DEV_USB |
| |
| config ATH79_MACH_TL_WA901ND |
| bool "TP-LINK TL-WA901ND/TL-WA7510N support" |
| select SOC_AR724X |
| select ATH79_DEV_AP9X_PCI if PCI |
| select ATH79_DEV_ETH |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_M25P80 |
| |
| config ATH79_MACH_TL_WA901ND_V2 |
| bool "TP-LINK TL-WA901ND v2 support" |
| select SOC_AR913X |
| select ATH79_DEV_ETH |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_M25P80 |
| select ATH79_DEV_WMAC |
| |
| config ATH79_MACH_TL_WDR4300 |
| bool "TP-LINK TL-WDR3600/4300/4310 board support" |
| select SOC_AR934X |
| select ATH79_DEV_AP9X_PCI if PCI |
| select ATH79_DEV_ETH |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_M25P80 |
| select ATH79_DEV_USB |
| select ATH79_DEV_WMAC |
| |
| config ATH79_MACH_TL_WR703N |
| bool "TP-LINK TL-WR703N support" |
| select SOC_AR933X |
| select ATH79_DEV_ETH |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_M25P80 |
| select ATH79_DEV_USB |
| select ATH79_DEV_WMAC |
| |
| config ATH79_MACH_TL_WR741ND |
| bool "TP-LINK TL-WR741ND support" |
| select SOC_AR724X |
| select ATH79_DEV_AP9X_PCI if PCI |
| select ATH79_DEV_ETH |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_M25P80 |
| |
| config ATH79_MACH_TL_WR741ND_V4 |
| bool "TP-LINK TL-WR741ND v4 support" |
| select SOC_AR933X |
| select ATH79_DEV_ETH |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_M25P80 |
| select ATH79_DEV_WMAC |
| |
| config ATH79_MACH_TL_WR841N_V1 |
| bool "TP-LINK TL-WR841N v1 support" |
| select SOC_AR71XX |
| select ATH79_DEV_DSA |
| select ATH79_DEV_ETH |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_M25P80 |
| |
| config ATH79_MACH_TL_WR841N_V8 |
| bool "TP-LINK TL-WR841N/ND v8 support" |
| select SOC_AR934X |
| select ATH79_DEV_ETH |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_M25P80 |
| select ATH79_DEV_WMAC |
| |
| config ATH79_MACH_TL_WR941ND |
| bool "TP-LINK TL-WR941ND support" |
| select SOC_AR913X |
| select ATH79_DEV_DSA |
| select ATH79_DEV_ETH |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_M25P80 |
| select ATH79_DEV_WMAC |
| |
| config ATH79_MACH_TL_WR1041N_V2 |
| bool "TP-LINK TL-WR1041N v2 support" |
| select SOC_AR934X |
| select ATH79_DEV_AP9X_PCI if PCI |
| select ATH79_DEV_ETH |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_M25P80 |
| select ATH79_DEV_USB |
| select ATH79_DEV_WMAC |
| |
| config ATH79_MACH_TL_WR1043ND |
| bool "TP-LINK TL-WR1043ND support" |
| select SOC_AR913X |
| select ATH79_DEV_ETH |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_M25P80 |
| select ATH79_DEV_USB |
| select ATH79_DEV_WMAC |
| |
| config ATH79_MACH_TL_WR2543N |
| bool "TP-LINK TL-WR2543N/ND support" |
| select SOC_AR724X |
| select ATH79_DEV_AP9X_PCI if PCI |
| select ATH79_DEV_ETH |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_M25P80 |
| select ATH79_DEV_USB |
| |
| config ATH79_MACH_TEW_632BRP |
| bool "TRENDnet TEW-632BRP support" |
| select SOC_AR913X |
| select ATH79_DEV_ETH |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_M25P80 |
| select ATH79_DEV_WMAC |
| select ATH79_NVRAM |
| |
| config ATH79_MACH_TEW_673GRU |
| bool "TRENDnet TEW-673GRU support" |
| select SOC_AR71XX |
| select ATH79_DEV_AP9X_PCI if PCI |
| select ATH79_DEV_ETH |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_M25P80 |
| select ATH79_DEV_USB |
| select ATH79_NVRAM |
| |
| config ATH79_MACH_TEW_712BR |
| bool "TRENDnet TEW-712BR support" |
| select SOC_AR933X |
| select ATH79_DEV_ETH |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_M25P80 |
| select ATH79_DEV_WMAC |
| select ATH79_NVRAM |
| |
| config ATH79_MACH_UBNT |
| bool "Ubiquiti AR71xx based boards support" |
| select SOC_AR71XX |
| select ATH79_DEV_ETH |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_M25P80 |
| select ATH79_DEV_USB |
| |
| config ATH79_MACH_UBNT_XM |
| bool "Ubiquiti Networks XM (rev 1.0) board" |
| select SOC_AR724X |
| select ATH79_DEV_AP9X_PCI if PCI |
| select ATH79_DEV_ETH |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_M25P80 |
| select ATH79_DEV_USB |
| help |
| Say 'Y' here if you want your kernel to support the |
| Ubiquiti Networks XM (rev 1.0) board. |
| |
| config ATH79_MACH_ZCN_1523H |
| bool "Zcomax ZCN-1523H support" |
| select SOC_AR724X |
| select ATH79_DEV_AP9X_PCI if PCI |
| select ATH79_DEV_ETH |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_M25P80 |
| |
| config ATH79_MACH_NBG460N |
| bool "Zyxel NBG460N/550N/550NH board support" |
| select SOC_AR913X |
| select ATH79_DEV_ETH |
| select ATH79_DEV_GPIO_BUTTONS |
| select ATH79_DEV_LEDS_GPIO |
| select ATH79_DEV_M25P80 |
| select ATH79_DEV_WMAC |
| |
| endmenu |
| |
| config SOC_AR71XX |
| select USB_ARCH_HAS_EHCI |
| select USB_ARCH_HAS_OHCI |
| select HW_HAS_PCI |
| def_bool n |
| |
| config SOC_AR724X |
| select USB_ARCH_HAS_EHCI |
| select USB_ARCH_HAS_OHCI |
| select HW_HAS_PCI |
| select PCI_AR724X if PCI |
| def_bool n |
| |
| config SOC_AR913X |
| select USB_ARCH_HAS_EHCI |
| def_bool n |
| |
| config SOC_AR933X |
| select USB_ARCH_HAS_EHCI |
| def_bool n |
| |
| config SOC_AR934X |
| select USB_ARCH_HAS_EHCI |
| select HW_HAS_PCI |
| select PCI_AR724X if PCI |
| def_bool n |
| |
| config SOC_QCA953X |
| select USB_ARCH_HAS_EHCI |
| select HW_HAS_PCI |
| select PCI_AR724X if PCI |
| def_bool n |
| |
| config SOC_QCA955X |
| select USB_ARCH_HAS_EHCI |
| select HW_HAS_PCI |
| select PCI_AR724X if PCI |
| def_bool n |
| |
| config SOC_QCA956X |
| select USB_ARCH_HAS_EHCI |
| select HW_HAS_PCI |
| select PCI_AR724X if PCI |
| def_bool n |
| |
| config ATH79_DEV_AP9X_PCI |
| select ATH79_PCI_ATH9K_FIXUP |
| def_bool n |
| |
| config ATH79_DEV_AUDIO |
| def_bool n |
| |
| config ATH79_DEV_DSA |
| def_bool n |
| |
| config ATH79_DEV_ETH |
| def_bool n |
| |
| config ATH79_DEV_M25P80 |
| select ATH79_DEV_SPI |
| def_bool n |
| |
| config ATH79_DEV_DSA |
| def_bool n |
| |
| config ATH79_DEV_ETH |
| def_bool n |
| |
| config ATH79_DEV_GPIO_BUTTONS |
| def_bool n |
| |
| config ATH79_DEV_LEDS_GPIO |
| def_bool n |
| |
| config ATH79_DEV_NFC |
| depends on (SOC_AR934X) |
| def_bool n |
| |
| config ATH79_DEV_NAND |
| select ATH79_NAND_CALDATA_FIXUP |
| def_bool n |
| |
| config ATH79_DEV_SPI |
| def_bool n |
| |
| config ATH79_DEV_I2C |
| def_bool n |
| |
| config ATH79_DEV_USB |
| def_bool n |
| |
| config ATH79_DEV_WMAC |
| depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA953X || SOC_QCA955X || SOC_QCA956X) |
| def_bool n |
| |
| config ATH79_NAND_CALDATA_FIXUP |
| def_bool n |
| |
| config ATH79_NVRAM |
| def_bool n |
| |
| config ATH79_PCI_ATH9K_FIXUP |
| def_bool n |
| |
| config ATH79_ROUTERBOOT |
| def_bool n |
| |
| config PCI_AR724X |
| def_bool n |
| |
| endif |
