| /* |
| * linux/arch/arm/mach-omap1/board-nokia770.c |
| * |
| * Modified from board-generic.c |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| #include <linux/gpio.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/mutex.h> |
| #include <linux/platform_device.h> |
| #include <linux/input.h> |
| #include <linux/clk.h> |
| #include <linux/omapfb.h> |
| |
| #include <linux/spi/spi.h> |
| #include <linux/spi/ads7846.h> |
| #include <linux/workqueue.h> |
| #include <linux/delay.h> |
| |
| #include <mach/hardware.h> |
| #include <asm/mach-types.h> |
| #include <asm/mach/arch.h> |
| #include <asm/mach/map.h> |
| |
| #include <plat/mux.h> |
| #include <plat/usb.h> |
| #include <plat/board.h> |
| #include <plat/keypad.h> |
| #include "common.h" |
| #include <plat/hwa742.h> |
| #include <plat/lcd_mipid.h> |
| #include <plat/mmc.h> |
| #include <plat/clock.h> |
| |
| #define ADS7846_PENDOWN_GPIO 15 |
| |
| static const unsigned int nokia770_keymap[] = { |
| KEY(1, 0, GROUP_0 | KEY_UP), |
| KEY(2, 0, GROUP_1 | KEY_F5), |
| KEY(0, 1, GROUP_0 | KEY_LEFT), |
| KEY(1, 1, GROUP_0 | KEY_ENTER), |
| KEY(2, 1, GROUP_0 | KEY_RIGHT), |
| KEY(0, 2, GROUP_1 | KEY_ESC), |
| KEY(1, 2, GROUP_0 | KEY_DOWN), |
| KEY(2, 2, GROUP_1 | KEY_F4), |
| KEY(0, 3, GROUP_2 | KEY_F7), |
| KEY(1, 3, GROUP_2 | KEY_F8), |
| KEY(2, 3, GROUP_2 | KEY_F6), |
| }; |
| |
| static struct resource nokia770_kp_resources[] = { |
| [0] = { |
| .start = INT_KEYBOARD, |
| .end = INT_KEYBOARD, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static const struct matrix_keymap_data nokia770_keymap_data = { |
| .keymap = nokia770_keymap, |
| .keymap_size = ARRAY_SIZE(nokia770_keymap), |
| }; |
| |
| static struct omap_kp_platform_data nokia770_kp_data = { |
| .rows = 8, |
| .cols = 8, |
| .keymap_data = &nokia770_keymap_data, |
| .delay = 4, |
| }; |
| |
| static struct platform_device nokia770_kp_device = { |
| .name = "omap-keypad", |
| .id = -1, |
| .dev = { |
| .platform_data = &nokia770_kp_data, |
| }, |
| .num_resources = ARRAY_SIZE(nokia770_kp_resources), |
| .resource = nokia770_kp_resources, |
| }; |
| |
| static struct platform_device *nokia770_devices[] __initdata = { |
| &nokia770_kp_device, |
| }; |
| |
| static void mipid_shutdown(struct mipid_platform_data *pdata) |
| { |
| if (pdata->nreset_gpio != -1) { |
| printk(KERN_INFO "shutdown LCD\n"); |
| gpio_set_value(pdata->nreset_gpio, 0); |
| msleep(120); |
| } |
| } |
| |
| static struct mipid_platform_data nokia770_mipid_platform_data = { |
| .shutdown = mipid_shutdown, |
| }; |
| |
| static void __init mipid_dev_init(void) |
| { |
| const struct omap_lcd_config *conf; |
| |
| conf = omap_get_config(OMAP_TAG_LCD, struct omap_lcd_config); |
| if (conf != NULL) { |
| nokia770_mipid_platform_data.nreset_gpio = conf->nreset_gpio; |
| nokia770_mipid_platform_data.data_lines = conf->data_lines; |
| } |
| } |
| |
| static void __init ads7846_dev_init(void) |
| { |
| if (gpio_request(ADS7846_PENDOWN_GPIO, "ADS7846 pendown") < 0) |
| printk(KERN_ERR "can't get ads7846 pen down GPIO\n"); |
| } |
| |
| static int ads7846_get_pendown_state(void) |
| { |
| return !gpio_get_value(ADS7846_PENDOWN_GPIO); |
| } |
| |
| static struct ads7846_platform_data nokia770_ads7846_platform_data __initdata = { |
| .x_max = 0x0fff, |
| .y_max = 0x0fff, |
| .x_plate_ohms = 180, |
| .pressure_max = 255, |
| .debounce_max = 10, |
| .debounce_tol = 3, |
| .debounce_rep = 1, |
| .get_pendown_state = ads7846_get_pendown_state, |
| }; |
| |
| static struct spi_board_info nokia770_spi_board_info[] __initdata = { |
| [0] = { |
| .modalias = "lcd_mipid", |
| .bus_num = 2, |
| .chip_select = 3, |
| .max_speed_hz = 12000000, |
| .platform_data = &nokia770_mipid_platform_data, |
| }, |
| [1] = { |
| .modalias = "ads7846", |
| .bus_num = 2, |
| .chip_select = 0, |
| .max_speed_hz = 2500000, |
| .irq = OMAP_GPIO_IRQ(15), |
| .platform_data = &nokia770_ads7846_platform_data, |
| }, |
| }; |
| |
| static struct hwa742_platform_data nokia770_hwa742_platform_data = { |
| .te_connected = 1, |
| }; |
| |
| static void __init hwa742_dev_init(void) |
| { |
| clk_add_alias("hwa_sys_ck", NULL, "bclk", NULL); |
| omapfb_set_ctrl_platform_data(&nokia770_hwa742_platform_data); |
| } |
| |
| /* assume no Mini-AB port */ |
| |
| static struct omap_usb_config nokia770_usb_config __initdata = { |
| .otg = 1, |
| .register_host = 1, |
| .register_dev = 1, |
| .hmc_mode = 16, |
| .pins[0] = 6, |
| }; |
| |
| #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) |
| |
| #define NOKIA770_GPIO_MMC_POWER 41 |
| #define NOKIA770_GPIO_MMC_SWITCH 23 |
| |
| static int nokia770_mmc_set_power(struct device *dev, int slot, int power_on, |
| int vdd) |
| { |
| gpio_set_value(NOKIA770_GPIO_MMC_POWER, power_on); |
| return 0; |
| } |
| |
| static int nokia770_mmc_get_cover_state(struct device *dev, int slot) |
| { |
| return gpio_get_value(NOKIA770_GPIO_MMC_SWITCH); |
| } |
| |
| static struct omap_mmc_platform_data nokia770_mmc2_data = { |
| .nr_slots = 1, |
| .dma_mask = 0xffffffff, |
| .max_freq = 12000000, |
| .slots[0] = { |
| .set_power = nokia770_mmc_set_power, |
| .get_cover_state = nokia770_mmc_get_cover_state, |
| .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, |
| .name = "mmcblk", |
| }, |
| }; |
| |
| static struct omap_mmc_platform_data *nokia770_mmc_data[OMAP16XX_NR_MMC]; |
| |
| static void __init nokia770_mmc_init(void) |
| { |
| int ret; |
| |
| ret = gpio_request(NOKIA770_GPIO_MMC_POWER, "MMC power"); |
| if (ret < 0) |
| return; |
| gpio_direction_output(NOKIA770_GPIO_MMC_POWER, 0); |
| |
| ret = gpio_request(NOKIA770_GPIO_MMC_SWITCH, "MMC cover"); |
| if (ret < 0) { |
| gpio_free(NOKIA770_GPIO_MMC_POWER); |
| return; |
| } |
| gpio_direction_input(NOKIA770_GPIO_MMC_SWITCH); |
| |
| /* Only the second MMC controller is used */ |
| nokia770_mmc_data[1] = &nokia770_mmc2_data; |
| omap1_init_mmc(nokia770_mmc_data, OMAP16XX_NR_MMC); |
| } |
| |
| #else |
| static inline void nokia770_mmc_init(void) |
| { |
| } |
| #endif |
| |
| static void __init omap_nokia770_init(void) |
| { |
| /* On Nokia 770, the SleepX signal is masked with an |
| * MPUIO line by default. It has to be unmasked for it |
| * to become functional */ |
| |
| /* SleepX mask direction */ |
| omap_writew((omap_readw(0xfffb5008) & ~2), 0xfffb5008); |
| /* Unmask SleepX signal */ |
| omap_writew((omap_readw(0xfffb5004) & ~2), 0xfffb5004); |
| |
| platform_add_devices(nokia770_devices, ARRAY_SIZE(nokia770_devices)); |
| spi_register_board_info(nokia770_spi_board_info, |
| ARRAY_SIZE(nokia770_spi_board_info)); |
| omap_serial_init(); |
| omap_register_i2c_bus(1, 100, NULL, 0); |
| hwa742_dev_init(); |
| ads7846_dev_init(); |
| mipid_dev_init(); |
| omap1_usb_init(&nokia770_usb_config); |
| nokia770_mmc_init(); |
| } |
| |
| MACHINE_START(NOKIA770, "Nokia 770") |
| .atag_offset = 0x100, |
| .map_io = omap16xx_map_io, |
| .init_early = omap1_init_early, |
| .reserve = omap_reserve, |
| .init_irq = omap1_init_irq, |
| .init_machine = omap_nokia770_init, |
| .timer = &omap1_timer, |
| .restart = omap1_restart, |
| MACHINE_END |