| /* |
| * Definitions for the FTDI USB Single Port Serial Converter - |
| * known as FTDI_SIO (Serial Input/Output application of the chipset) |
| * |
| * The example I have is known as the USC-1000 which is available from |
| * http://www.dse.co.nz - cat no XH4214 It looks similar to this: |
| * http://www.dansdata.com/usbser.htm but I can't be sure There are other |
| * USC-1000s which don't look like my device though so beware! |
| * |
| * The device is based on the FTDI FT8U100AX chip. It has a DB25 on one side, |
| * USB on the other. |
| * |
| * Thanx to FTDI (http://www.ftdichip.com) for so kindly providing details |
| * of the protocol required to talk to the device and ongoing assistence |
| * during development. |
| * |
| * Bill Ryder - bryder@sgi.com formerly of Silicon Graphics, Inc.- wrote the |
| * FTDI_SIO implementation. |
| * |
| * Philipp Gühring - pg@futureware.at - added the Device ID of the USB relais |
| * from Rudolf Gugler |
| * |
| */ |
| |
| #define FTDI_VID 0x0403 /* Vendor Id */ |
| #define FTDI_SIO_PID 0x8372 /* Product Id SIO application of 8U100AX */ |
| #define FTDI_8U232AM_PID 0x6001 /* Similar device to SIO above */ |
| #define FTDI_8U232AM_ALT_PID 0x6006 /* FTDI's alternate PID for above */ |
| #define FTDI_8U2232C_PID 0x6010 /* Dual channel device */ |
| #define FTDI_232RL_PID 0xFBFA /* Product ID for FT232RL */ |
| #define FTDI_4232H_PID 0x6011 /* Quad channel hi-speed device */ |
| #define FTDI_RELAIS_PID 0xFA10 /* Relais device from Rudolf Gugler */ |
| #define FTDI_NF_RIC_VID 0x0DCD /* Vendor Id */ |
| #define FTDI_NF_RIC_PID 0x0001 /* Product Id */ |
| #define FTDI_USBX_707_PID 0xF857 /* ADSTech IR Blaster USBX-707 */ |
| |
| /* Larsen and Brusgaard AltiTrack/USBtrack */ |
| #define LARSENBRUSGAARD_VID 0x0FD8 |
| #define LB_ALTITRACK_PID 0x0001 |
| |
| /* www.canusb.com Lawicel CANUSB device */ |
| #define FTDI_CANUSB_PID 0xFFA8 /* Product Id */ |
| |
| /* AlphaMicro Components AMC-232USB01 device */ |
| #define FTDI_AMC232_PID 0xFF00 /* Product Id */ |
| |
| /* www.candapter.com Ewert Energy Systems CANdapter device */ |
| #define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */ |
| |
| /* SCS HF Radio Modems PID's (http://www.scs-ptc.com) */ |
| /* the VID is the standard ftdi vid (FTDI_VID) */ |
| #define FTDI_SCS_DEVICE_0_PID 0xD010 /* SCS PTC-IIusb */ |
| #define FTDI_SCS_DEVICE_1_PID 0xD011 /* SCS Tracker / DSP TNC */ |
| #define FTDI_SCS_DEVICE_2_PID 0xD012 |
| #define FTDI_SCS_DEVICE_3_PID 0xD013 |
| #define FTDI_SCS_DEVICE_4_PID 0xD014 |
| #define FTDI_SCS_DEVICE_5_PID 0xD015 |
| #define FTDI_SCS_DEVICE_6_PID 0xD016 |
| #define FTDI_SCS_DEVICE_7_PID 0xD017 |
| |
| /* ACT Solutions HomePro ZWave interface (http://www.act-solutions.com/HomePro.htm) */ |
| #define FTDI_ACTZWAVE_PID 0xF2D0 |
| |
| |
| /* www.starting-point-systems.com µChameleon device */ |
| #define FTDI_MICRO_CHAMELEON_PID 0xCAA0 /* Product Id */ |
| |
| /* www.irtrans.de device */ |
| #define FTDI_IRTRANS_PID 0xFC60 /* Product Id */ |
| |
| |
| /* www.thoughttechnology.com/ TT-USB provide with procomp use ftdi_sio */ |
| #define FTDI_TTUSB_PID 0xFF20 /* Product Id */ |
| |
| /* iPlus device */ |
| #define FTDI_IPLUS_PID 0xD070 /* Product Id */ |
| #define FTDI_IPLUS2_PID 0xD071 /* Product Id */ |
| |
| /* DMX4ALL DMX Interfaces */ |
| #define FTDI_DMX4ALL 0xC850 |
| |
| /* OpenDCC (www.opendcc.de) product id */ |
| #define FTDI_OPENDCC_PID 0xBFD8 |
| |
| /* Sprog II (Andrew Crosland's SprogII DCC interface) */ |
| #define FTDI_SPROG_II 0xF0C8 |
| |
| /* www.crystalfontz.com devices - thanx for providing free devices for evaluation ! */ |
| /* they use the ftdi chipset for the USB interface and the vendor id is the same */ |
| #define FTDI_XF_632_PID 0xFC08 /* 632: 16x2 Character Display */ |
| #define FTDI_XF_634_PID 0xFC09 /* 634: 20x4 Character Display */ |
| #define FTDI_XF_547_PID 0xFC0A /* 547: Two line Display */ |
| #define FTDI_XF_633_PID 0xFC0B /* 633: 16x2 Character Display with Keys */ |
| #define FTDI_XF_631_PID 0xFC0C /* 631: 20x2 Character Display */ |
| #define FTDI_XF_635_PID 0xFC0D /* 635: 20x4 Character Display */ |
| #define FTDI_XF_640_PID 0xFC0E /* 640: Two line Display */ |
| #define FTDI_XF_642_PID 0xFC0F /* 642: Two line Display */ |
| |
| /* Video Networks Limited / Homechoice in the UK use an ftdi-based device for their 1Mb */ |
| /* broadband internet service. The following PID is exhibited by the usb device supplied */ |
| /* (the VID is the standard ftdi vid (FTDI_VID) */ |
| #define FTDI_VNHCPCUSB_D_PID 0xfe38 /* Product Id */ |
| |
| /* |
| * PCDJ use ftdi based dj-controllers. The following PID is for their DAC-2 device |
| * http://www.pcdjhardware.com/DAC2.asp (PID sent by Wouter Paesen) |
| * (the VID is the standard ftdi vid (FTDI_VID) */ |
| #define FTDI_PCDJ_DAC2_PID 0xFA88 |
| |
| /* |
| * The following are the values for the Matrix Orbital LCD displays, |
| * which are the FT232BM ( similar to the 8U232AM ) |
| */ |
| #define FTDI_MTXORB_0_PID 0xFA00 /* Matrix Orbital Product Id */ |
| #define FTDI_MTXORB_1_PID 0xFA01 /* Matrix Orbital Product Id */ |
| #define FTDI_MTXORB_2_PID 0xFA02 /* Matrix Orbital Product Id */ |
| #define FTDI_MTXORB_3_PID 0xFA03 /* Matrix Orbital Product Id */ |
| #define FTDI_MTXORB_4_PID 0xFA04 /* Matrix Orbital Product Id */ |
| #define FTDI_MTXORB_5_PID 0xFA05 /* Matrix Orbital Product Id */ |
| #define FTDI_MTXORB_6_PID 0xFA06 /* Matrix Orbital Product Id */ |
| |
| /* OOCDlink by Joern Kaipf <joernk@web.de> |
| * (http://www.joernonline.de/dw/doku.php?id=start&idx=projects:oocdlink) */ |
| #define FTDI_OOCDLINK_PID 0xbaf8 /* Amontec JTAGkey */ |
| |
| /* |
| * The following are the values for the Matrix Orbital FTDI Range |
| * Anything in this range will use an FT232RL. |
| */ |
| #define MTXORB_VID 0x1B3D |
| #define MTXORB_FTDI_RANGE_0100_PID 0x0100 |
| #define MTXORB_FTDI_RANGE_0101_PID 0x0101 |
| #define MTXORB_FTDI_RANGE_0102_PID 0x0102 |
| #define MTXORB_FTDI_RANGE_0103_PID 0x0103 |
| #define MTXORB_FTDI_RANGE_0104_PID 0x0104 |
| #define MTXORB_FTDI_RANGE_0105_PID 0x0105 |
| #define MTXORB_FTDI_RANGE_0106_PID 0x0106 |
| #define MTXORB_FTDI_RANGE_0107_PID 0x0107 |
| #define MTXORB_FTDI_RANGE_0108_PID 0x0108 |
| #define MTXORB_FTDI_RANGE_0109_PID 0x0109 |
| #define MTXORB_FTDI_RANGE_010A_PID 0x010A |
| #define MTXORB_FTDI_RANGE_010B_PID 0x010B |
| #define MTXORB_FTDI_RANGE_010C_PID 0x010C |
| #define MTXORB_FTDI_RANGE_010D_PID 0x010D |
| #define MTXORB_FTDI_RANGE_010E_PID 0x010E |
| #define MTXORB_FTDI_RANGE_010F_PID 0x010F |
| #define MTXORB_FTDI_RANGE_0110_PID 0x0110 |
| #define MTXORB_FTDI_RANGE_0111_PID 0x0111 |
| #define MTXORB_FTDI_RANGE_0112_PID 0x0112 |
| #define MTXORB_FTDI_RANGE_0113_PID 0x0113 |
| #define MTXORB_FTDI_RANGE_0114_PID 0x0114 |
| #define MTXORB_FTDI_RANGE_0115_PID 0x0115 |
| #define MTXORB_FTDI_RANGE_0116_PID 0x0116 |
| #define MTXORB_FTDI_RANGE_0117_PID 0x0117 |
| #define MTXORB_FTDI_RANGE_0118_PID 0x0118 |
| #define MTXORB_FTDI_RANGE_0119_PID 0x0119 |
| #define MTXORB_FTDI_RANGE_011A_PID 0x011A |
| #define MTXORB_FTDI_RANGE_011B_PID 0x011B |
| #define MTXORB_FTDI_RANGE_011C_PID 0x011C |
| #define MTXORB_FTDI_RANGE_011D_PID 0x011D |
| #define MTXORB_FTDI_RANGE_011E_PID 0x011E |
| #define MTXORB_FTDI_RANGE_011F_PID 0x011F |
| #define MTXORB_FTDI_RANGE_0120_PID 0x0120 |
| #define MTXORB_FTDI_RANGE_0121_PID 0x0121 |
| #define MTXORB_FTDI_RANGE_0122_PID 0x0122 |
| #define MTXORB_FTDI_RANGE_0123_PID 0x0123 |
| #define MTXORB_FTDI_RANGE_0124_PID 0x0124 |
| #define MTXORB_FTDI_RANGE_0125_PID 0x0125 |
| #define MTXORB_FTDI_RANGE_0126_PID 0x0126 |
| #define MTXORB_FTDI_RANGE_0127_PID 0x0127 |
| #define MTXORB_FTDI_RANGE_0128_PID 0x0128 |
| #define MTXORB_FTDI_RANGE_0129_PID 0x0129 |
| #define MTXORB_FTDI_RANGE_012A_PID 0x012A |
| #define MTXORB_FTDI_RANGE_012B_PID 0x012B |
| #define MTXORB_FTDI_RANGE_012C_PID 0x012C |
| #define MTXORB_FTDI_RANGE_012D_PID 0x012D |
| #define MTXORB_FTDI_RANGE_012E_PID 0x012E |
| #define MTXORB_FTDI_RANGE_012F_PID 0x012F |
| #define MTXORB_FTDI_RANGE_0130_PID 0x0130 |
| #define MTXORB_FTDI_RANGE_0131_PID 0x0131 |
| #define MTXORB_FTDI_RANGE_0132_PID 0x0132 |
| #define MTXORB_FTDI_RANGE_0133_PID 0x0133 |
| #define MTXORB_FTDI_RANGE_0134_PID 0x0134 |
| #define MTXORB_FTDI_RANGE_0135_PID 0x0135 |
| #define MTXORB_FTDI_RANGE_0136_PID 0x0136 |
| #define MTXORB_FTDI_RANGE_0137_PID 0x0137 |
| #define MTXORB_FTDI_RANGE_0138_PID 0x0138 |
| #define MTXORB_FTDI_RANGE_0139_PID 0x0139 |
| #define MTXORB_FTDI_RANGE_013A_PID 0x013A |
| #define MTXORB_FTDI_RANGE_013B_PID 0x013B |
| #define MTXORB_FTDI_RANGE_013C_PID 0x013C |
| #define MTXORB_FTDI_RANGE_013D_PID 0x013D |
| #define MTXORB_FTDI_RANGE_013E_PID 0x013E |
| #define MTXORB_FTDI_RANGE_013F_PID 0x013F |
| #define MTXORB_FTDI_RANGE_0140_PID 0x0140 |
| #define MTXORB_FTDI_RANGE_0141_PID 0x0141 |
| #define MTXORB_FTDI_RANGE_0142_PID 0x0142 |
| #define MTXORB_FTDI_RANGE_0143_PID 0x0143 |
| #define MTXORB_FTDI_RANGE_0144_PID 0x0144 |
| #define MTXORB_FTDI_RANGE_0145_PID 0x0145 |
| #define MTXORB_FTDI_RANGE_0146_PID 0x0146 |
| #define MTXORB_FTDI_RANGE_0147_PID 0x0147 |
| #define MTXORB_FTDI_RANGE_0148_PID 0x0148 |
| #define MTXORB_FTDI_RANGE_0149_PID 0x0149 |
| #define MTXORB_FTDI_RANGE_014A_PID 0x014A |
| #define MTXORB_FTDI_RANGE_014B_PID 0x014B |
| #define MTXORB_FTDI_RANGE_014C_PID 0x014C |
| #define MTXORB_FTDI_RANGE_014D_PID 0x014D |
| #define MTXORB_FTDI_RANGE_014E_PID 0x014E |
| #define MTXORB_FTDI_RANGE_014F_PID 0x014F |
| #define MTXORB_FTDI_RANGE_0150_PID 0x0150 |
| #define MTXORB_FTDI_RANGE_0151_PID 0x0151 |
| #define MTXORB_FTDI_RANGE_0152_PID 0x0152 |
| #define MTXORB_FTDI_RANGE_0153_PID 0x0153 |
| #define MTXORB_FTDI_RANGE_0154_PID 0x0154 |
| #define MTXORB_FTDI_RANGE_0155_PID 0x0155 |
| #define MTXORB_FTDI_RANGE_0156_PID 0x0156 |
| #define MTXORB_FTDI_RANGE_0157_PID 0x0157 |
| #define MTXORB_FTDI_RANGE_0158_PID 0x0158 |
| #define MTXORB_FTDI_RANGE_0159_PID 0x0159 |
| #define MTXORB_FTDI_RANGE_015A_PID 0x015A |
| #define MTXORB_FTDI_RANGE_015B_PID 0x015B |
| #define MTXORB_FTDI_RANGE_015C_PID 0x015C |
| #define MTXORB_FTDI_RANGE_015D_PID 0x015D |
| #define MTXORB_FTDI_RANGE_015E_PID 0x015E |
| #define MTXORB_FTDI_RANGE_015F_PID 0x015F |
| #define MTXORB_FTDI_RANGE_0160_PID 0x0160 |
| #define MTXORB_FTDI_RANGE_0161_PID 0x0161 |
| #define MTXORB_FTDI_RANGE_0162_PID 0x0162 |
| #define MTXORB_FTDI_RANGE_0163_PID 0x0163 |
| #define MTXORB_FTDI_RANGE_0164_PID 0x0164 |
| #define MTXORB_FTDI_RANGE_0165_PID 0x0165 |
| #define MTXORB_FTDI_RANGE_0166_PID 0x0166 |
| #define MTXORB_FTDI_RANGE_0167_PID 0x0167 |
| #define MTXORB_FTDI_RANGE_0168_PID 0x0168 |
| #define MTXORB_FTDI_RANGE_0169_PID 0x0169 |
| #define MTXORB_FTDI_RANGE_016A_PID 0x016A |
| #define MTXORB_FTDI_RANGE_016B_PID 0x016B |
| #define MTXORB_FTDI_RANGE_016C_PID 0x016C |
| #define MTXORB_FTDI_RANGE_016D_PID 0x016D |
| #define MTXORB_FTDI_RANGE_016E_PID 0x016E |
| #define MTXORB_FTDI_RANGE_016F_PID 0x016F |
| #define MTXORB_FTDI_RANGE_0170_PID 0x0170 |
| #define MTXORB_FTDI_RANGE_0171_PID 0x0171 |
| #define MTXORB_FTDI_RANGE_0172_PID 0x0172 |
| #define MTXORB_FTDI_RANGE_0173_PID 0x0173 |
| #define MTXORB_FTDI_RANGE_0174_PID 0x0174 |
| #define MTXORB_FTDI_RANGE_0175_PID 0x0175 |
| #define MTXORB_FTDI_RANGE_0176_PID 0x0176 |
| #define MTXORB_FTDI_RANGE_0177_PID 0x0177 |
| #define MTXORB_FTDI_RANGE_0178_PID 0x0178 |
| #define MTXORB_FTDI_RANGE_0179_PID 0x0179 |
| #define MTXORB_FTDI_RANGE_017A_PID 0x017A |
| #define MTXORB_FTDI_RANGE_017B_PID 0x017B |
| #define MTXORB_FTDI_RANGE_017C_PID 0x017C |
| #define MTXORB_FTDI_RANGE_017D_PID 0x017D |
| #define MTXORB_FTDI_RANGE_017E_PID 0x017E |
| #define MTXORB_FTDI_RANGE_017F_PID 0x017F |
| #define MTXORB_FTDI_RANGE_0180_PID 0x0180 |
| #define MTXORB_FTDI_RANGE_0181_PID 0x0181 |
| #define MTXORB_FTDI_RANGE_0182_PID 0x0182 |
| #define MTXORB_FTDI_RANGE_0183_PID 0x0183 |
| #define MTXORB_FTDI_RANGE_0184_PID 0x0184 |
| #define MTXORB_FTDI_RANGE_0185_PID 0x0185 |
| #define MTXORB_FTDI_RANGE_0186_PID 0x0186 |
| #define MTXORB_FTDI_RANGE_0187_PID 0x0187 |
| #define MTXORB_FTDI_RANGE_0188_PID 0x0188 |
| #define MTXORB_FTDI_RANGE_0189_PID 0x0189 |
| #define MTXORB_FTDI_RANGE_018A_PID 0x018A |
| #define MTXORB_FTDI_RANGE_018B_PID 0x018B |
| #define MTXORB_FTDI_RANGE_018C_PID 0x018C |
| #define MTXORB_FTDI_RANGE_018D_PID 0x018D |
| #define MTXORB_FTDI_RANGE_018E_PID 0x018E |
| #define MTXORB_FTDI_RANGE_018F_PID 0x018F |
| #define MTXORB_FTDI_RANGE_0190_PID 0x0190 |
| #define MTXORB_FTDI_RANGE_0191_PID 0x0191 |
| #define MTXORB_FTDI_RANGE_0192_PID 0x0192 |
| #define MTXORB_FTDI_RANGE_0193_PID 0x0193 |
| #define MTXORB_FTDI_RANGE_0194_PID 0x0194 |
| #define MTXORB_FTDI_RANGE_0195_PID 0x0195 |
| #define MTXORB_FTDI_RANGE_0196_PID 0x0196 |
| #define MTXORB_FTDI_RANGE_0197_PID 0x0197 |
| #define MTXORB_FTDI_RANGE_0198_PID 0x0198 |
| #define MTXORB_FTDI_RANGE_0199_PID 0x0199 |
| #define MTXORB_FTDI_RANGE_019A_PID 0x019A |
| #define MTXORB_FTDI_RANGE_019B_PID 0x019B |
| #define MTXORB_FTDI_RANGE_019C_PID 0x019C |
| #define MTXORB_FTDI_RANGE_019D_PID 0x019D |
| #define MTXORB_FTDI_RANGE_019E_PID 0x019E |
| #define MTXORB_FTDI_RANGE_019F_PID 0x019F |
| #define MTXORB_FTDI_RANGE_01A0_PID 0x01A0 |
| #define MTXORB_FTDI_RANGE_01A1_PID 0x01A1 |
| #define MTXORB_FTDI_RANGE_01A2_PID 0x01A2 |
| #define MTXORB_FTDI_RANGE_01A3_PID 0x01A3 |
| #define MTXORB_FTDI_RANGE_01A4_PID 0x01A4 |
| #define MTXORB_FTDI_RANGE_01A5_PID 0x01A5 |
| #define MTXORB_FTDI_RANGE_01A6_PID 0x01A6 |
| #define MTXORB_FTDI_RANGE_01A7_PID 0x01A7 |
| #define MTXORB_FTDI_RANGE_01A8_PID 0x01A8 |
| #define MTXORB_FTDI_RANGE_01A9_PID 0x01A9 |
| #define MTXORB_FTDI_RANGE_01AA_PID 0x01AA |
| #define MTXORB_FTDI_RANGE_01AB_PID 0x01AB |
| #define MTXORB_FTDI_RANGE_01AC_PID 0x01AC |
| #define MTXORB_FTDI_RANGE_01AD_PID 0x01AD |
| #define MTXORB_FTDI_RANGE_01AE_PID 0x01AE |
| #define MTXORB_FTDI_RANGE_01AF_PID 0x01AF |
| #define MTXORB_FTDI_RANGE_01B0_PID 0x01B0 |
| #define MTXORB_FTDI_RANGE_01B1_PID 0x01B1 |
| #define MTXORB_FTDI_RANGE_01B2_PID 0x01B2 |
| #define MTXORB_FTDI_RANGE_01B3_PID 0x01B3 |
| #define MTXORB_FTDI_RANGE_01B4_PID 0x01B4 |
| #define MTXORB_FTDI_RANGE_01B5_PID 0x01B5 |
| #define MTXORB_FTDI_RANGE_01B6_PID 0x01B6 |
| #define MTXORB_FTDI_RANGE_01B7_PID 0x01B7 |
| #define MTXORB_FTDI_RANGE_01B8_PID 0x01B8 |
| #define MTXORB_FTDI_RANGE_01B9_PID 0x01B9 |
| #define MTXORB_FTDI_RANGE_01BA_PID 0x01BA |
| #define MTXORB_FTDI_RANGE_01BB_PID 0x01BB |
| #define MTXORB_FTDI_RANGE_01BC_PID 0x01BC |
| #define MTXORB_FTDI_RANGE_01BD_PID 0x01BD |
| #define MTXORB_FTDI_RANGE_01BE_PID 0x01BE |
| #define MTXORB_FTDI_RANGE_01BF_PID 0x01BF |
| #define MTXORB_FTDI_RANGE_01C0_PID 0x01C0 |
| #define MTXORB_FTDI_RANGE_01C1_PID 0x01C1 |
| #define MTXORB_FTDI_RANGE_01C2_PID 0x01C2 |
| #define MTXORB_FTDI_RANGE_01C3_PID 0x01C3 |
| #define MTXORB_FTDI_RANGE_01C4_PID 0x01C4 |
| #define MTXORB_FTDI_RANGE_01C5_PID 0x01C5 |
| #define MTXORB_FTDI_RANGE_01C6_PID 0x01C6 |
| #define MTXORB_FTDI_RANGE_01C7_PID 0x01C7 |
| #define MTXORB_FTDI_RANGE_01C8_PID 0x01C8 |
| #define MTXORB_FTDI_RANGE_01C9_PID 0x01C9 |
| #define MTXORB_FTDI_RANGE_01CA_PID 0x01CA |
| #define MTXORB_FTDI_RANGE_01CB_PID 0x01CB |
| #define MTXORB_FTDI_RANGE_01CC_PID 0x01CC |
| #define MTXORB_FTDI_RANGE_01CD_PID 0x01CD |
| #define MTXORB_FTDI_RANGE_01CE_PID 0x01CE |
| #define MTXORB_FTDI_RANGE_01CF_PID 0x01CF |
| #define MTXORB_FTDI_RANGE_01D0_PID 0x01D0 |
| #define MTXORB_FTDI_RANGE_01D1_PID 0x01D1 |
| #define MTXORB_FTDI_RANGE_01D2_PID 0x01D2 |
| #define MTXORB_FTDI_RANGE_01D3_PID 0x01D3 |
| #define MTXORB_FTDI_RANGE_01D4_PID 0x01D4 |
| #define MTXORB_FTDI_RANGE_01D5_PID 0x01D5 |
| #define MTXORB_FTDI_RANGE_01D6_PID 0x01D6 |
| #define MTXORB_FTDI_RANGE_01D7_PID 0x01D7 |
| #define MTXORB_FTDI_RANGE_01D8_PID 0x01D8 |
| #define MTXORB_FTDI_RANGE_01D9_PID 0x01D9 |
| #define MTXORB_FTDI_RANGE_01DA_PID 0x01DA |
| #define MTXORB_FTDI_RANGE_01DB_PID 0x01DB |
| #define MTXORB_FTDI_RANGE_01DC_PID 0x01DC |
| #define MTXORB_FTDI_RANGE_01DD_PID 0x01DD |
| #define MTXORB_FTDI_RANGE_01DE_PID 0x01DE |
| #define MTXORB_FTDI_RANGE_01DF_PID 0x01DF |
| #define MTXORB_FTDI_RANGE_01E0_PID 0x01E0 |
| #define MTXORB_FTDI_RANGE_01E1_PID 0x01E1 |
| #define MTXORB_FTDI_RANGE_01E2_PID 0x01E2 |
| #define MTXORB_FTDI_RANGE_01E3_PID 0x01E3 |
| #define MTXORB_FTDI_RANGE_01E4_PID 0x01E4 |
| #define MTXORB_FTDI_RANGE_01E5_PID 0x01E5 |
| #define MTXORB_FTDI_RANGE_01E6_PID 0x01E6 |
| #define MTXORB_FTDI_RANGE_01E7_PID 0x01E7 |
| #define MTXORB_FTDI_RANGE_01E8_PID 0x01E8 |
| #define MTXORB_FTDI_RANGE_01E9_PID 0x01E9 |
| #define MTXORB_FTDI_RANGE_01EA_PID 0x01EA |
| #define MTXORB_FTDI_RANGE_01EB_PID 0x01EB |
| #define MTXORB_FTDI_RANGE_01EC_PID 0x01EC |
| #define MTXORB_FTDI_RANGE_01ED_PID 0x01ED |
| #define MTXORB_FTDI_RANGE_01EE_PID 0x01EE |
| #define MTXORB_FTDI_RANGE_01EF_PID 0x01EF |
| #define MTXORB_FTDI_RANGE_01F0_PID 0x01F0 |
| #define MTXORB_FTDI_RANGE_01F1_PID 0x01F1 |
| #define MTXORB_FTDI_RANGE_01F2_PID 0x01F2 |
| #define MTXORB_FTDI_RANGE_01F3_PID 0x01F3 |
| #define MTXORB_FTDI_RANGE_01F4_PID 0x01F4 |
| #define MTXORB_FTDI_RANGE_01F5_PID 0x01F5 |
| #define MTXORB_FTDI_RANGE_01F6_PID 0x01F6 |
| #define MTXORB_FTDI_RANGE_01F7_PID 0x01F7 |
| #define MTXORB_FTDI_RANGE_01F8_PID 0x01F8 |
| #define MTXORB_FTDI_RANGE_01F9_PID 0x01F9 |
| #define MTXORB_FTDI_RANGE_01FA_PID 0x01FA |
| #define MTXORB_FTDI_RANGE_01FB_PID 0x01FB |
| #define MTXORB_FTDI_RANGE_01FC_PID 0x01FC |
| #define MTXORB_FTDI_RANGE_01FD_PID 0x01FD |
| #define MTXORB_FTDI_RANGE_01FE_PID 0x01FE |
| #define MTXORB_FTDI_RANGE_01FF_PID 0x01FF |
| |
| |
| |
| /* Interbiometrics USB I/O Board */ |
| /* Developed for Interbiometrics by Rudolf Gugler */ |
| #define INTERBIOMETRICS_VID 0x1209 |
| #define INTERBIOMETRICS_IOBOARD_PID 0x1002 |
| #define INTERBIOMETRICS_MINI_IOBOARD_PID 0x1006 |
| |
| /* |
| * The following are the values for the Perle Systems |
| * UltraPort USB serial converters |
| */ |
| #define FTDI_PERLE_ULTRAPORT_PID 0xF0C0 /* Perle UltraPort Product Id */ |
| |
| /* |
| * The following are the values for the Sealevel SeaLINK+ adapters. |
| * (Original list sent by Tuan Hoang. Ian Abbott renamed the macros and |
| * removed some PIDs that don't seem to match any existing products.) |
| */ |
| #define SEALEVEL_VID 0x0c52 /* Sealevel Vendor ID */ |
| #define SEALEVEL_2101_PID 0x2101 /* SeaLINK+232 (2101/2105) */ |
| #define SEALEVEL_2102_PID 0x2102 /* SeaLINK+485 (2102) */ |
| #define SEALEVEL_2103_PID 0x2103 /* SeaLINK+232I (2103) */ |
| #define SEALEVEL_2104_PID 0x2104 /* SeaLINK+485I (2104) */ |
| #define SEALEVEL_2106_PID 0x9020 /* SeaLINK+422 (2106) */ |
| #define SEALEVEL_2201_1_PID 0x2211 /* SeaPORT+2/232 (2201) Port 1 */ |
| #define SEALEVEL_2201_2_PID 0x2221 /* SeaPORT+2/232 (2201) Port 2 */ |
| #define SEALEVEL_2202_1_PID 0x2212 /* SeaPORT+2/485 (2202) Port 1 */ |
| #define SEALEVEL_2202_2_PID 0x2222 /* SeaPORT+2/485 (2202) Port 2 */ |
| #define SEALEVEL_2203_1_PID 0x2213 /* SeaPORT+2 (2203) Port 1 */ |
| #define SEALEVEL_2203_2_PID 0x2223 /* SeaPORT+2 (2203) Port 2 */ |
| #define SEALEVEL_2401_1_PID 0x2411 /* SeaPORT+4/232 (2401) Port 1 */ |
| #define SEALEVEL_2401_2_PID 0x2421 /* SeaPORT+4/232 (2401) Port 2 */ |
| #define SEALEVEL_2401_3_PID 0x2431 /* SeaPORT+4/232 (2401) Port 3 */ |
| #define SEALEVEL_2401_4_PID 0x2441 /* SeaPORT+4/232 (2401) Port 4 */ |
| #define SEALEVEL_2402_1_PID 0x2412 /* SeaPORT+4/485 (2402) Port 1 */ |
| #define SEALEVEL_2402_2_PID 0x2422 /* SeaPORT+4/485 (2402) Port 2 */ |
| #define SEALEVEL_2402_3_PID 0x2432 /* SeaPORT+4/485 (2402) Port 3 */ |
| #define SEALEVEL_2402_4_PID 0x2442 /* SeaPORT+4/485 (2402) Port 4 */ |
| #define SEALEVEL_2403_1_PID 0x2413 /* SeaPORT+4 (2403) Port 1 */ |
| #define SEALEVEL_2403_2_PID 0x2423 /* SeaPORT+4 (2403) Port 2 */ |
| #define SEALEVEL_2403_3_PID 0x2433 /* SeaPORT+4 (2403) Port 3 */ |
| #define SEALEVEL_2403_4_PID 0x2443 /* SeaPORT+4 (2403) Port 4 */ |
| #define SEALEVEL_2801_1_PID 0X2811 /* SeaLINK+8/232 (2801) Port 1 */ |
| #define SEALEVEL_2801_2_PID 0X2821 /* SeaLINK+8/232 (2801) Port 2 */ |
| #define SEALEVEL_2801_3_PID 0X2831 /* SeaLINK+8/232 (2801) Port 3 */ |
| #define SEALEVEL_2801_4_PID 0X2841 /* SeaLINK+8/232 (2801) Port 4 */ |
| #define SEALEVEL_2801_5_PID 0X2851 /* SeaLINK+8/232 (2801) Port 5 */ |
| #define SEALEVEL_2801_6_PID 0X2861 /* SeaLINK+8/232 (2801) Port 6 */ |
| #define SEALEVEL_2801_7_PID 0X2871 /* SeaLINK+8/232 (2801) Port 7 */ |
| #define SEALEVEL_2801_8_PID 0X2881 /* SeaLINK+8/232 (2801) Port 8 */ |
| #define SEALEVEL_2802_1_PID 0X2812 /* SeaLINK+8/485 (2802) Port 1 */ |
| #define SEALEVEL_2802_2_PID 0X2822 /* SeaLINK+8/485 (2802) Port 2 */ |
| #define SEALEVEL_2802_3_PID 0X2832 /* SeaLINK+8/485 (2802) Port 3 */ |
| #define SEALEVEL_2802_4_PID 0X2842 /* SeaLINK+8/485 (2802) Port 4 */ |
| #define SEALEVEL_2802_5_PID 0X2852 /* SeaLINK+8/485 (2802) Port 5 */ |
| #define SEALEVEL_2802_6_PID 0X2862 /* SeaLINK+8/485 (2802) Port 6 */ |
| #define SEALEVEL_2802_7_PID 0X2872 /* SeaLINK+8/485 (2802) Port 7 */ |
| #define SEALEVEL_2802_8_PID 0X2882 /* SeaLINK+8/485 (2802) Port 8 */ |
| #define SEALEVEL_2803_1_PID 0X2813 /* SeaLINK+8 (2803) Port 1 */ |
| #define SEALEVEL_2803_2_PID 0X2823 /* SeaLINK+8 (2803) Port 2 */ |
| #define SEALEVEL_2803_3_PID 0X2833 /* SeaLINK+8 (2803) Port 3 */ |
| #define SEALEVEL_2803_4_PID 0X2843 /* SeaLINK+8 (2803) Port 4 */ |
| #define SEALEVEL_2803_5_PID 0X2853 /* SeaLINK+8 (2803) Port 5 */ |
| #define SEALEVEL_2803_6_PID 0X2863 /* SeaLINK+8 (2803) Port 6 */ |
| #define SEALEVEL_2803_7_PID 0X2873 /* SeaLINK+8 (2803) Port 7 */ |
| #define SEALEVEL_2803_8_PID 0X2883 /* SeaLINK+8 (2803) Port 8 */ |
| |
| /* |
| * The following are the values for two KOBIL chipcard terminals. |
| */ |
| #define KOBIL_VID 0x0d46 /* KOBIL Vendor ID */ |
| #define KOBIL_CONV_B1_PID 0x2020 /* KOBIL Konverter for B1 */ |
| #define KOBIL_CONV_KAAN_PID 0x2021 /* KOBIL_Konverter for KAAN */ |
| |
| /* |
| * Icom ID-1 digital transceiver |
| */ |
| |
| #define ICOM_ID1_VID 0x0C26 |
| #define ICOM_ID1_PID 0x0004 |
| |
| /* |
| * ASK.fr devices |
| */ |
| #define FTDI_ASK_RDR400_PID 0xC991 /* ASK RDR 400 series card reader */ |
| |
| /* |
| * FTDI USB UART chips used in construction projects from the |
| * Elektor Electronics magazine (http://elektor-electronics.co.uk) |
| */ |
| #define ELEKTOR_VID 0x0C7D |
| #define ELEKTOR_FT323R_PID 0x0005 /* RFID-Reader, issue 09-2006 */ |
| |
| /* |
| * DSS-20 Sync Station for Sony Ericsson P800 |
| */ |
| #define FTDI_DSS20_PID 0xFC82 |
| |
| /* |
| * Home Electronics (www.home-electro.com) USB gadgets |
| */ |
| #define FTDI_HE_TIRA1_PID 0xFA78 /* Tira-1 IR transceiver */ |
| |
| /* USB-UIRT - An infrared receiver and transmitter using the 8U232AM chip */ |
| /* http://home.earthlink.net/~jrhees/USBUIRT/index.htm */ |
| #define FTDI_USB_UIRT_PID 0xF850 /* Product Id */ |
| |
| /* TNC-X USB-to-packet-radio adapter, versions prior to 3.0 (DLP module) */ |
| |
| #define FTDI_TNC_X_PID 0xEBE0 |
| |
| /* |
| * ELV USB devices submitted by Christian Abt of ELV (www.elv.de). |
| * All of these devices use FTDI's vendor ID (0x0403). |
| * |
| * The previously included PID for the UO 100 module was incorrect. |
| * In fact, that PID was for ELV's UR 100 USB-RS232 converter (0xFB58). |
| * |
| * Armin Laeuger originally sent the PID for the UM 100 module. |
| */ |
| #define FTDI_R2000KU_TRUE_RNG 0xFB80 /* R2000KU TRUE RNG */ |
| #define FTDI_ELV_UR100_PID 0xFB58 /* USB-RS232-Umsetzer (UR 100) */ |
| #define FTDI_ELV_UM100_PID 0xFB5A /* USB-Modul UM 100 */ |
| #define FTDI_ELV_UO100_PID 0xFB5B /* USB-Modul UO 100 */ |
| #define FTDI_ELV_ALC8500_PID 0xF06E /* ALC 8500 Expert */ |
| /* Additional ELV PIDs that default to using the FTDI D2XX drivers on |
| * MS Windows, rather than the FTDI Virtual Com Port drivers. |
| * Maybe these will be easier to use with the libftdi/libusb user-space |
| * drivers, or possibly the Comedi drivers in some cases. */ |
| #define FTDI_ELV_CLI7000_PID 0xFB59 /* Computer-Light-Interface (CLI 7000) */ |
| #define FTDI_ELV_PPS7330_PID 0xFB5C /* Processor-Power-Supply (PPS 7330) */ |
| #define FTDI_ELV_TFM100_PID 0xFB5D /* Temperartur-Feuchte Messgeraet (TFM 100) */ |
| #define FTDI_ELV_UDF77_PID 0xFB5E /* USB DCF Funkurh (UDF 77) */ |
| #define FTDI_ELV_UIO88_PID 0xFB5F /* USB-I/O Interface (UIO 88) */ |
| #define FTDI_ELV_UAD8_PID 0xF068 /* USB-AD-Wandler (UAD 8) */ |
| #define FTDI_ELV_UDA7_PID 0xF069 /* USB-DA-Wandler (UDA 7) */ |
| #define FTDI_ELV_USI2_PID 0xF06A /* USB-Schrittmotoren-Interface (USI 2) */ |
| #define FTDI_ELV_T1100_PID 0xF06B /* Thermometer (T 1100) */ |
| #define FTDI_ELV_PCD200_PID 0xF06C /* PC-Datenlogger (PCD 200) */ |
| #define FTDI_ELV_ULA200_PID 0xF06D /* USB-LCD-Ansteuerung (ULA 200) */ |
| #define FTDI_ELV_FHZ1000PC_PID 0xF06F /* FHZ 1000 PC */ |
| #define FTDI_ELV_CSI8_PID 0xE0F0 /* Computer-Schalt-Interface (CSI 8) */ |
| #define FTDI_ELV_EM1000DL_PID 0xE0F1 /* PC-Datenlogger fuer Energiemonitor (EM 1000 DL) */ |
| #define FTDI_ELV_PCK100_PID 0xE0F2 /* PC-Kabeltester (PCK 100) */ |
| #define FTDI_ELV_RFP500_PID 0xE0F3 /* HF-Leistungsmesser (RFP 500) */ |
| #define FTDI_ELV_FS20SIG_PID 0xE0F4 /* Signalgeber (FS 20 SIG) */ |
| #define FTDI_ELV_WS300PC_PID 0xE0F6 /* PC-Wetterstation (WS 300 PC) */ |
| #define FTDI_ELV_FHZ1300PC_PID 0xE0E8 /* FHZ 1300 PC */ |
| #define FTDI_ELV_WS500_PID 0xE0E9 /* PC-Wetterstation (WS 500) */ |
| #define FTDI_ELV_HS485_PID 0xE0EA /* USB to RS-485 adapter */ |
| #define FTDI_ELV_EM1010PC_PID 0xE0EF /* Engery monitor EM 1010 PC */ |
| #define FTDI_PHI_FISCO_PID 0xE40B /* PHI Fisco USB to Serial cable */ |
| |
| /* |
| * Definitions for ID TECH (www.idt-net.com) devices |
| */ |
| #define IDTECH_VID 0x0ACD /* ID TECH Vendor ID */ |
| #define IDTECH_IDT1221U_PID 0x0300 /* IDT1221U USB to RS-232 adapter */ |
| |
| /* |
| * Definitions for Omnidirectional Control Technology, Inc. devices |
| */ |
| #define OCT_VID 0x0B39 /* OCT vendor ID */ |
| /* Note: OCT US101 is also rebadged as Dick Smith Electronics (NZ) XH6381 */ |
| /* Also rebadged as Dick Smith Electronics (Aus) XH6451 */ |
| /* Also rebadged as SIIG Inc. model US2308 hardware version 1 */ |
| #define OCT_US101_PID 0x0421 /* OCT US101 USB to RS-232 */ |
| |
| /* an infrared receiver for user access control with IR tags */ |
| #define FTDI_PIEGROUP_PID 0xF208 /* Product Id */ |
| |
| /* |
| * Definitions for Artemis astronomical USB based cameras |
| * Check it at http://www.artemisccd.co.uk/ |
| */ |
| #define FTDI_ARTEMIS_PID 0xDF28 /* All Artemis Cameras */ |
| |
| /* |
| * Definitions for ATIK Instruments astronomical USB based cameras |
| * Check it at http://www.atik-instruments.com/ |
| */ |
| #define FTDI_ATIK_ATK16_PID 0xDF30 /* ATIK ATK-16 Grayscale Camera */ |
| #define FTDI_ATIK_ATK16C_PID 0xDF32 /* ATIK ATK-16C Colour Camera */ |
| #define FTDI_ATIK_ATK16HR_PID 0xDF31 /* ATIK ATK-16HR Grayscale Camera */ |
| #define FTDI_ATIK_ATK16HRC_PID 0xDF33 /* ATIK ATK-16HRC Colour Camera */ |
| #define FTDI_ATIK_ATK16IC_PID 0xDF35 /* ATIK ATK-16IC Grayscale Camera */ |
| |
| /* |
| * Protego product ids |
| */ |
| #define PROTEGO_SPECIAL_1 0xFC70 /* special/unknown device */ |
| #define PROTEGO_R2X0 0xFC71 /* R200-USB TRNG unit (R210, R220, and R230) */ |
| #define PROTEGO_SPECIAL_3 0xFC72 /* special/unknown device */ |
| #define PROTEGO_SPECIAL_4 0xFC73 /* special/unknown device */ |
| |
| /* |
| * Gude Analog- und Digitalsysteme GmbH |
| */ |
| #define FTDI_GUDEADS_E808_PID 0xE808 |
| #define FTDI_GUDEADS_E809_PID 0xE809 |
| #define FTDI_GUDEADS_E80A_PID 0xE80A |
| #define FTDI_GUDEADS_E80B_PID 0xE80B |
| #define FTDI_GUDEADS_E80C_PID 0xE80C |
| #define FTDI_GUDEADS_E80D_PID 0xE80D |
| #define FTDI_GUDEADS_E80E_PID 0xE80E |
| #define FTDI_GUDEADS_E80F_PID 0xE80F |
| #define FTDI_GUDEADS_E888_PID 0xE888 /* Expert ISDN Control USB */ |
| #define FTDI_GUDEADS_E889_PID 0xE889 /* USB RS-232 OptoBridge */ |
| #define FTDI_GUDEADS_E88A_PID 0xE88A |
| #define FTDI_GUDEADS_E88B_PID 0xE88B |
| #define FTDI_GUDEADS_E88C_PID 0xE88C |
| #define FTDI_GUDEADS_E88D_PID 0xE88D |
| #define FTDI_GUDEADS_E88E_PID 0xE88E |
| #define FTDI_GUDEADS_E88F_PID 0xE88F |
| |
| /* |
| * Linx Technologies product ids |
| */ |
| #define LINX_SDMUSBQSS_PID 0xF448 /* Linx SDM-USB-QS-S */ |
| #define LINX_MASTERDEVEL2_PID 0xF449 /* Linx Master Development 2.0 */ |
| #define LINX_FUTURE_0_PID 0xF44A /* Linx future device */ |
| #define LINX_FUTURE_1_PID 0xF44B /* Linx future device */ |
| #define LINX_FUTURE_2_PID 0xF44C /* Linx future device */ |
| |
| /* CCS Inc. ICDU/ICDU40 product ID - the FT232BM is used in an in-circuit-debugger */ |
| /* unit for PIC16's/PIC18's */ |
| #define FTDI_CCSICDU20_0_PID 0xF9D0 |
| #define FTDI_CCSICDU40_1_PID 0xF9D1 |
| #define FTDI_CCSMACHX_2_PID 0xF9D2 |
| #define FTDI_CCSLOAD_N_GO_3_PID 0xF9D3 |
| #define FTDI_CCSICDU64_4_PID 0xF9D4 |
| #define FTDI_CCSPRIME8_5_PID 0xF9D5 |
| |
| /* Inside Accesso contactless reader (http://www.insidefr.com) */ |
| #define INSIDE_ACCESSO 0xFAD0 |
| |
| /* |
| * Intrepid Control Systems (http://www.intrepidcs.com/) ValueCAN and NeoVI |
| */ |
| #define INTREPID_VID 0x093C |
| #define INTREPID_VALUECAN_PID 0x0601 |
| #define INTREPID_NEOVI_PID 0x0701 |
| |
| /* |
| * Falcom Wireless Communications GmbH |
| */ |
| #define FALCOM_VID 0x0F94 /* Vendor Id */ |
| #define FALCOM_TWIST_PID 0x0001 /* Falcom Twist USB GPRS modem */ |
| #define FALCOM_SAMBA_PID 0x0005 /* Falcom Samba USB GPRS modem */ |
| |
| /* |
| * SUUNTO product ids |
| */ |
| #define FTDI_SUUNTO_SPORTS_PID 0xF680 /* Suunto Sports instrument */ |
| |
| /* |
| * Oceanic product ids |
| */ |
| #define FTDI_OCEANIC_PID 0xF460 /* Oceanic dive instrument */ |
| |
| /* |
| * TTi (Thurlby Thandar Instruments) |
| */ |
| #define TTI_VID 0x103E /* Vendor Id */ |
| #define TTI_QL355P_PID 0x03E8 /* TTi QL355P power supply */ |
| |
| /* |
| * Definitions for B&B Electronics products. |
| */ |
| #define BANDB_VID 0x0856 /* B&B Electronics Vendor ID */ |
| #define BANDB_USOTL4_PID 0xAC01 /* USOTL4 Isolated RS-485 Converter */ |
| #define BANDB_USTL4_PID 0xAC02 /* USTL4 RS-485 Converter */ |
| #define BANDB_USO9ML2_PID 0xAC03 /* USO9ML2 Isolated RS-232 Converter */ |
| |
| /* |
| * RM Michaelides CANview USB (http://www.rmcan.com) |
| * CAN fieldbus interface adapter, added by port GmbH www.port.de) |
| * Ian Abbott changed the macro names for consistency. |
| */ |
| #define FTDI_RM_CANVIEW_PID 0xfd60 /* Product Id */ |
| |
| /* |
| * EVER Eco Pro UPS (http://www.ever.com.pl/) |
| */ |
| |
| #define EVER_ECO_PRO_CDS 0xe520 /* RS-232 converter */ |
| |
| /* |
| * 4N-GALAXY.DE PIDs for CAN-USB, USB-RS232, USB-RS422, USB-RS485, |
| * USB-TTY activ, USB-TTY passiv. Some PIDs are used by several devices |
| * and I'm not entirely sure which are used by which. |
| */ |
| #define FTDI_4N_GALAXY_DE_1_PID 0xF3C0 |
| #define FTDI_4N_GALAXY_DE_2_PID 0xF3C1 |
| |
| /* |
| * Mobility Electronics products. |
| */ |
| #define MOBILITY_VID 0x1342 |
| #define MOBILITY_USB_SERIAL_PID 0x0202 /* EasiDock USB 200 serial */ |
| |
| /* |
| * microHAM product IDs (http://www.microham.com). |
| * Submitted by Justin Burket (KL1RL) <zorton@jtan.com> |
| * and Mike Studer (K6EEP) <k6eep@hamsoftware.org>. |
| * Ian Abbott <abbotti@mev.co.uk> added a few more from the driver INF file. |
| */ |
| #define FTDI_MHAM_KW_PID 0xEEE8 /* USB-KW interface */ |
| #define FTDI_MHAM_YS_PID 0xEEE9 /* USB-YS interface */ |
| #define FTDI_MHAM_Y6_PID 0xEEEA /* USB-Y6 interface */ |
| #define FTDI_MHAM_Y8_PID 0xEEEB /* USB-Y8 interface */ |
| #define FTDI_MHAM_IC_PID 0xEEEC /* USB-IC interface */ |
| #define FTDI_MHAM_DB9_PID 0xEEED /* USB-DB9 interface */ |
| #define FTDI_MHAM_RS232_PID 0xEEEE /* USB-RS232 interface */ |
| #define FTDI_MHAM_Y9_PID 0xEEEF /* USB-Y9 interface */ |
| |
| /* |
| * Active Robots product ids. |
| */ |
| #define FTDI_ACTIVE_ROBOTS_PID 0xE548 /* USB comms board */ |
| |
| /* |
| * Xsens Technologies BV products (http://www.xsens.com). |
| */ |
| #define XSENS_CONVERTER_0_PID 0xD388 |
| #define XSENS_CONVERTER_1_PID 0xD389 |
| #define XSENS_CONVERTER_2_PID 0xD38A |
| #define XSENS_CONVERTER_3_PID 0xD38B |
| #define XSENS_CONVERTER_4_PID 0xD38C |
| #define XSENS_CONVERTER_5_PID 0xD38D |
| #define XSENS_CONVERTER_6_PID 0xD38E |
| #define XSENS_CONVERTER_7_PID 0xD38F |
| |
| /* |
| * Teratronik product ids. |
| * Submitted by O. Wölfelschneider. |
| */ |
| #define FTDI_TERATRONIK_VCP_PID 0xEC88 /* Teratronik device (preferring VCP driver on windows) */ |
| #define FTDI_TERATRONIK_D2XX_PID 0xEC89 /* Teratronik device (preferring D2XX driver on windows) */ |
| |
| /* |
| * Evolution Robotics products (http://www.evolution.com/). |
| * Submitted by Shawn M. Lavelle. |
| */ |
| #define EVOLUTION_VID 0xDEEE /* Vendor ID */ |
| #define EVOLUTION_ER1_PID 0x0300 /* ER1 Control Module */ |
| #define EVO_8U232AM_PID 0x02FF /* Evolution robotics RCM2 (FT232AM)*/ |
| #define EVO_HYBRID_PID 0x0302 /* Evolution robotics RCM4 PID (FT232BM)*/ |
| #define EVO_RCM4_PID 0x0303 /* Evolution robotics RCM4 PID */ |
| |
| /* Pyramid Computer GmbH */ |
| #define FTDI_PYRAMID_PID 0xE6C8 /* Pyramid Appliance Display */ |
| |
| /* |
| * NDI (www.ndigital.com) product ids |
| */ |
| #define FTDI_NDI_HUC_PID 0xDA70 /* NDI Host USB Converter */ |
| #define FTDI_NDI_SPECTRA_SCU_PID 0xDA71 /* NDI Spectra SCU */ |
| #define FTDI_NDI_FUTURE_2_PID 0xDA72 /* NDI future device #2 */ |
| #define FTDI_NDI_FUTURE_3_PID 0xDA73 /* NDI future device #3 */ |
| #define FTDI_NDI_AURORA_SCU_PID 0xDA74 /* NDI Aurora SCU */ |
| |
| /* |
| * Posiflex inc retail equipment (http://www.posiflex.com.tw) |
| */ |
| #define POSIFLEX_VID 0x0d3a /* Vendor ID */ |
| #define POSIFLEX_PP7000_PID 0x0300 /* PP-7000II thermal printer */ |
| |
| /* |
| * Westrex International devices submitted by Cory Lee |
| */ |
| #define FTDI_WESTREX_MODEL_777_PID 0xDC00 /* Model 777 */ |
| #define FTDI_WESTREX_MODEL_8900F_PID 0xDC01 /* Model 8900F */ |
| |
| /* |
| * RR-CirKits LocoBuffer USB (http://www.rr-cirkits.com) |
| */ |
| #define FTDI_RRCIRKITS_LOCOBUFFER_PID 0xc7d0 /* LocoBuffer USB */ |
| |
| /* |
| * Eclo (http://www.eclo.pt/) product IDs. |
| * PID 0xEA90 submitted by Martin Grill. |
| */ |
| #define FTDI_ECLO_COM_1WIRE_PID 0xEA90 /* COM to 1-Wire USB adaptor */ |
| |
| /* |
| * Papouch products (http://www.papouch.com/) |
| * Submitted by Folkert van Heusden |
| */ |
| |
| #define PAPOUCH_VID 0x5050 /* Vendor ID */ |
| #define PAPOUCH_TMU_PID 0x0400 /* TMU USB Thermometer */ |
| #define PAPOUCH_QUIDO4x4_PID 0x0900 /* Quido 4/4 Module */ |
| |
| /* |
| * ACG Identification Technologies GmbH products (http://www.acg.de/). |
| * Submitted by anton -at- goto10 -dot- org. |
| */ |
| #define FTDI_ACG_HFDUAL_PID 0xDD20 /* HF Dual ISO Reader (RFID) */ |
| |
| /* |
| * Yost Engineering, Inc. products (www.yostengineering.com). |
| * PID 0xE050 submitted by Aaron Prose. |
| */ |
| #define FTDI_YEI_SERVOCENTER31_PID 0xE050 /* YEI ServoCenter3.1 USB */ |
| |
| /* |
| * ThorLabs USB motor drivers |
| */ |
| #define FTDI_THORLABS_PID 0xfaf0 /* ThorLabs USB motor drivers */ |
| |
| /* |
| * Testo products (http://www.testo.com/) |
| * Submitted by Colin Leroy |
| */ |
| #define TESTO_VID 0x128D |
| #define TESTO_USB_INTERFACE_PID 0x0001 |
| |
| /* |
| * Gamma Scout (http://gamma-scout.com/). Submitted by rsc@runtux.com. |
| */ |
| #define FTDI_GAMMA_SCOUT_PID 0xD678 /* Gamma Scout online */ |
| |
| /* |
| * Tactrix OpenPort (ECU) devices. |
| * OpenPort 1.3M submitted by Donour Sizemore. |
| * OpenPort 1.3S and 1.3U submitted by Ian Abbott. |
| */ |
| #define FTDI_TACTRIX_OPENPORT_13M_PID 0xCC48 /* OpenPort 1.3 Mitsubishi */ |
| #define FTDI_TACTRIX_OPENPORT_13S_PID 0xCC49 /* OpenPort 1.3 Subaru */ |
| #define FTDI_TACTRIX_OPENPORT_13U_PID 0xCC4A /* OpenPort 1.3 Universal */ |
| |
| /* |
| * Telldus Technologies |
| */ |
| #define TELLDUS_VID 0x1781 /* Vendor ID */ |
| #define TELLDUS_TELLSTICK_PID 0x0C30 /* RF control dongle 433 MHz using FT232RL */ |
| |
| /* |
| * IBS elektronik product ids |
| * Submitted by Thomas Schleusener |
| */ |
| #define FTDI_IBS_US485_PID 0xff38 /* IBS US485 (USB<-->RS422/485 interface) */ |
| #define FTDI_IBS_PICPRO_PID 0xff39 /* IBS PIC-Programmer */ |
| #define FTDI_IBS_PCMCIA_PID 0xff3a /* IBS Card reader for PCMCIA SRAM-cards */ |
| #define FTDI_IBS_PK1_PID 0xff3b /* IBS PK1 - Particel counter */ |
| #define FTDI_IBS_RS232MON_PID 0xff3c /* IBS RS232 - Monitor */ |
| #define FTDI_IBS_APP70_PID 0xff3d /* APP 70 (dust monitoring system) */ |
| #define FTDI_IBS_PEDO_PID 0xff3e /* IBS PEDO-Modem (RF modem 868.35 MHz) */ |
| #define FTDI_IBS_PROD_PID 0xff3f /* future device */ |
| |
| /* |
| * MaxStream devices www.maxstream.net |
| */ |
| #define FTDI_MAXSTREAM_PID 0xEE18 /* Xbee PKG-U Module */ |
| |
| /* Olimex */ |
| #define OLIMEX_VID 0x15BA |
| #define OLIMEX_ARM_USB_OCD_PID 0x0003 |
| |
| /* Luminary Micro Stellaris Boards, VID = FTDI_VID */ |
| /* FTDI 2332C Dual channel device, side A=245 FIFO (JTAG), Side B=RS232 UART */ |
| #define LMI_LM3S_DEVEL_BOARD_PID 0xbcd8 |
| #define LMI_LM3S_EVAL_BOARD_PID 0xbcd9 |
| |
| /* www.elsterelectricity.com Elster Unicom III Optical Probe */ |
| #define FTDI_ELSTER_UNICOM_PID 0xE700 /* Product Id */ |
| |
| /* |
| * The Mobility Lab (TML) |
| * Submitted by Pierre Castella |
| */ |
| #define TML_VID 0x1B91 /* Vendor ID */ |
| #define TML_USB_SERIAL_PID 0x0064 /* USB - Serial Converter */ |
| |
| /* Propox devices */ |
| #define FTDI_PROPOX_JTAGCABLEII_PID 0xD738 |
| |
| /* Rig Expert Ukraine devices */ |
| #define FTDI_REU_TINY_PID 0xED22 /* RigExpert Tiny */ |
| |
| /* Domintell products http://www.domintell.com */ |
| #define FTDI_DOMINTELL_DGQG_PID 0xEF50 /* Master */ |
| #define FTDI_DOMINTELL_DUSB_PID 0xEF51 /* DUSB01 module */ |
| |
| /* Alti-2 products http://www.alti-2.com */ |
| #define ALTI2_VID 0x1BC9 |
| #define ALTI2_N3_PID 0x6001 /* Neptune 3 */ |
| |
| /* Commands */ |
| #define FTDI_SIO_RESET 0 /* Reset the port */ |
| #define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */ |
| #define FTDI_SIO_SET_FLOW_CTRL 2 /* Set flow control register */ |
| #define FTDI_SIO_SET_BAUD_RATE 3 /* Set baud rate */ |
| #define FTDI_SIO_SET_DATA 4 /* Set the data characteristics of the port */ |
| #define FTDI_SIO_GET_MODEM_STATUS 5 /* Retrieve current value of modern status register */ |
| #define FTDI_SIO_SET_EVENT_CHAR 6 /* Set the event character */ |
| #define FTDI_SIO_SET_ERROR_CHAR 7 /* Set the error character */ |
| #define FTDI_SIO_SET_LATENCY_TIMER 9 /* Set the latency timer */ |
| #define FTDI_SIO_GET_LATENCY_TIMER 10 /* Get the latency timer */ |
| |
| /* Interface indicies for FT2232, FT2232H and FT4232H devices*/ |
| #define INTERFACE_A 1 |
| #define INTERFACE_B 2 |
| #define INTERFACE_C 3 |
| #define INTERFACE_D 4 |
| |
| /* |
| * FIC / OpenMoko, Inc. http://wiki.openmoko.org/wiki/Neo1973_Debug_Board_v3 |
| * Submitted by Harald Welte <laforge@openmoko.org> |
| */ |
| #define FIC_VID 0x1457 |
| #define FIC_NEO1973_DEBUG_PID 0x5118 |
| |
| /* |
| * RATOC REX-USB60F |
| */ |
| #define RATOC_VENDOR_ID 0x0584 |
| #define RATOC_PRODUCT_ID_USB60F 0xb020 |
| |
| /* |
| * DIEBOLD BCS SE923 |
| */ |
| #define DIEBOLD_BCS_SE923_PID 0xfb99 |
| |
| /* |
| * Atmel STK541 |
| */ |
| #define ATMEL_VID 0x03eb /* Vendor ID */ |
| #define STK541_PID 0x2109 /* Zigbee Controller */ |
| |
| /* |
| * Dresden Elektronic Sensor Terminal Board |
| */ |
| #define DE_VID 0x1cf1 /* Vendor ID */ |
| #define STB_PID 0x0001 /* Sensor Terminal Board */ |
| #define WHT_PID 0x0004 /* Wireless Handheld Terminal */ |
| |
| /* |
| * Blackfin gnICE JTAG |
| * http://docs.blackfin.uclinux.org/doku.php?id=hw:jtag:gnice |
| */ |
| #define ADI_VID 0x0456 |
| #define ADI_GNICE_PID 0xF000 |
| |
| /* |
| * JETI SPECTROMETER SPECBOS 1201 |
| * http://www.jeti.com/products/sys/scb/scb1201.php |
| */ |
| #define JETI_VID 0x0c6c |
| #define JETI_SPC1201_PID 0x04b2 |
| |
| /* |
| * Marvell SheevaPlug |
| */ |
| #define MARVELL_VID 0x9e88 |
| #define MARVELL_SHEEVAPLUG_PID 0x9e8f |
| |
| #define FTDI_TURTELIZER_PID 0xBDC8 /* JTAG/RS-232 adapter by egnite GmBH */ |
| |
| /* |
| * GN Otometrics (http://www.otometrics.com) |
| * Submitted by Ville Sundberg. |
| */ |
| #define GN_OTOMETRICS_VID 0x0c33 /* Vendor ID */ |
| #define AURICAL_USB_PID 0x0010 /* Aurical USB Audiometer */ |
| |
| /* |
| * Bayer Ascensia Contour blood glucose meter USB-converter cable. |
| * http://winglucofacts.com/cables/ |
| */ |
| #define BAYER_VID 0x1A79 |
| #define BAYER_CONTOUR_CABLE_PID 0x6001 |
| |
| /* |
| * Marvell OpenRD Base, Client |
| * http://www.open-rd.org |
| * OpenRD Base, Client use VID 0x0403 |
| */ |
| #define MARVELL_OPENRD_PID 0x9e90 |
| |
| /* |
| * BmRequestType: 1100 0000b |
| * bRequest: FTDI_E2_READ |
| * wValue: 0 |
| * wIndex: Address of word to read |
| * wLength: 2 |
| * Data: Will return a word of data from E2Address |
| * |
| */ |
| |
| /* Port Identifier Table */ |
| #define PIT_DEFAULT 0 /* SIOA */ |
| #define PIT_SIOA 1 /* SIOA */ |
| /* The device this driver is tested with one has only one port */ |
| #define PIT_SIOB 2 /* SIOB */ |
| #define PIT_PARALLEL 3 /* Parallel */ |
| |
| /* FTDI_SIO_RESET */ |
| #define FTDI_SIO_RESET_REQUEST FTDI_SIO_RESET |
| #define FTDI_SIO_RESET_REQUEST_TYPE 0x40 |
| #define FTDI_SIO_RESET_SIO 0 |
| #define FTDI_SIO_RESET_PURGE_RX 1 |
| #define FTDI_SIO_RESET_PURGE_TX 2 |
| |
| /* |
| * BmRequestType: 0100 0000B |
| * bRequest: FTDI_SIO_RESET |
| * wValue: Control Value |
| * 0 = Reset SIO |
| * 1 = Purge RX buffer |
| * 2 = Purge TX buffer |
| * wIndex: Port |
| * wLength: 0 |
| * Data: None |
| * |
| * The Reset SIO command has this effect: |
| * |
| * Sets flow control set to 'none' |
| * Event char = $0D |
| * Event trigger = disabled |
| * Purge RX buffer |
| * Purge TX buffer |
| * Clear DTR |
| * Clear RTS |
| * baud and data format not reset |
| * |
| * The Purge RX and TX buffer commands affect nothing except the buffers |
| * |
| */ |
| |
| /* FTDI_SIO_SET_BAUDRATE */ |
| #define FTDI_SIO_SET_BAUDRATE_REQUEST_TYPE 0x40 |
| #define FTDI_SIO_SET_BAUDRATE_REQUEST 3 |
| |
| /* |
| * BmRequestType: 0100 0000B |
| * bRequest: FTDI_SIO_SET_BAUDRATE |
| * wValue: BaudDivisor value - see below |
| * wIndex: Port |
| * wLength: 0 |
| * Data: None |
| * The BaudDivisor values are calculated as follows: |
| * - BaseClock is either 12000000 or 48000000 depending on the device. FIXME: I wish |
| * I knew how to detect old chips to select proper base clock! |
| * - BaudDivisor is a fixed point number encoded in a funny way. |
| * (--WRONG WAY OF THINKING--) |
| * BaudDivisor is a fixed point number encoded with following bit weighs: |
| * (-2)(-1)(13..0). It is a radical with a denominator of 4, so values |
| * end with 0.0 (00...), 0.25 (10...), 0.5 (01...), and 0.75 (11...). |
| * (--THE REALITY--) |
| * The both-bits-set has quite different meaning from 0.75 - the chip designers |
| * have decided it to mean 0.125 instead of 0.75. |
| * This info looked up in FTDI application note "FT8U232 DEVICES \ Data Rates |
| * and Flow Control Consideration for USB to RS232". |
| * - BaudDivisor = (BaseClock / 16) / BaudRate, where the (=) operation should |
| * automagically re-encode the resulting value to take fractions into consideration. |
| * As all values are integers, some bit twiddling is in order: |
| * BaudDivisor = (BaseClock / 16 / BaudRate) | |
| * (((BaseClock / 2 / BaudRate) & 4) ? 0x4000 // 0.5 |
| * : ((BaseClock / 2 / BaudRate) & 2) ? 0x8000 // 0.25 |
| * : ((BaseClock / 2 / BaudRate) & 1) ? 0xc000 // 0.125 |
| * : 0) |
| * |
| * For the FT232BM, a 17th divisor bit was introduced to encode the multiples |
| * of 0.125 missing from the FT8U232AM. Bits 16 to 14 are coded as follows |
| * (the first four codes are the same as for the FT8U232AM, where bit 16 is |
| * always 0): |
| * 000 - add .000 to divisor |
| * 001 - add .500 to divisor |
| * 010 - add .250 to divisor |
| * 011 - add .125 to divisor |
| * 100 - add .375 to divisor |
| * 101 - add .625 to divisor |
| * 110 - add .750 to divisor |
| * 111 - add .875 to divisor |
| * Bits 15 to 0 of the 17-bit divisor are placed in the urb value. Bit 16 is |
| * placed in bit 0 of the urb index. |
| * |
| * Note that there are a couple of special cases to support the highest baud |
| * rates. If the calculated divisor value is 1, this needs to be replaced with |
| * 0. Additionally for the FT232BM, if the calculated divisor value is 0x4001 |
| * (1.5), this needs to be replaced with 0x0001 (1) (but this divisor value is |
| * not supported by the FT8U232AM). |
| */ |
| |
| typedef enum { |
| SIO = 1, |
| FT8U232AM = 2, |
| FT232BM = 3, |
| FT2232C = 4, |
| FT232RL = 5, |
| FT2232H = 6, |
| FT4232H = 7 |
| } ftdi_chip_type_t; |
| |
| typedef enum { |
| ftdi_sio_b300 = 0, |
| ftdi_sio_b600 = 1, |
| ftdi_sio_b1200 = 2, |
| ftdi_sio_b2400 = 3, |
| ftdi_sio_b4800 = 4, |
| ftdi_sio_b9600 = 5, |
| ftdi_sio_b19200 = 6, |
| ftdi_sio_b38400 = 7, |
| ftdi_sio_b57600 = 8, |
| ftdi_sio_b115200 = 9 |
| } FTDI_SIO_baudrate_t; |
| |
| /* |
| * The ftdi_8U232AM_xxMHz_byyy constants have been removed. The encoded divisor values |
| * are calculated internally. |
| */ |
| |
| #define FTDI_SIO_SET_DATA_REQUEST FTDI_SIO_SET_DATA |
| #define FTDI_SIO_SET_DATA_REQUEST_TYPE 0x40 |
| #define FTDI_SIO_SET_DATA_PARITY_NONE (0x0 << 8) |
| #define FTDI_SIO_SET_DATA_PARITY_ODD (0x1 << 8) |
| #define FTDI_SIO_SET_DATA_PARITY_EVEN (0x2 << 8) |
| #define FTDI_SIO_SET_DATA_PARITY_MARK (0x3 << 8) |
| #define FTDI_SIO_SET_DATA_PARITY_SPACE (0x4 << 8) |
| #define FTDI_SIO_SET_DATA_STOP_BITS_1 (0x0 << 11) |
| #define FTDI_SIO_SET_DATA_STOP_BITS_15 (0x1 << 11) |
| #define FTDI_SIO_SET_DATA_STOP_BITS_2 (0x2 << 11) |
| #define FTDI_SIO_SET_BREAK (0x1 << 14) |
| /* FTDI_SIO_SET_DATA */ |
| |
| /* |
| * BmRequestType: 0100 0000B |
| * bRequest: FTDI_SIO_SET_DATA |
| * wValue: Data characteristics (see below) |
| * wIndex: Port |
| * wLength: 0 |
| * Data: No |
| * |
| * Data characteristics |
| * |
| * B0..7 Number of data bits |
| * B8..10 Parity |
| * 0 = None |
| * 1 = Odd |
| * 2 = Even |
| * 3 = Mark |
| * 4 = Space |
| * B11..13 Stop Bits |
| * 0 = 1 |
| * 1 = 1.5 |
| * 2 = 2 |
| * B14 |
| * 1 = TX ON (break) |
| * 0 = TX OFF (normal state) |
| * B15 Reserved |
| * |
| */ |
| |
| |
| |
| /* FTDI_SIO_MODEM_CTRL */ |
| #define FTDI_SIO_SET_MODEM_CTRL_REQUEST_TYPE 0x40 |
| #define FTDI_SIO_SET_MODEM_CTRL_REQUEST FTDI_SIO_MODEM_CTRL |
| |
| /* |
| * BmRequestType: 0100 0000B |
| * bRequest: FTDI_SIO_MODEM_CTRL |
| * wValue: ControlValue (see below) |
| * wIndex: Port |
| * wLength: 0 |
| * Data: None |
| * |
| * NOTE: If the device is in RTS/CTS flow control, the RTS set by this |
| * command will be IGNORED without an error being returned |
| * Also - you can not set DTR and RTS with one control message |
| */ |
| |
| #define FTDI_SIO_SET_DTR_MASK 0x1 |
| #define FTDI_SIO_SET_DTR_HIGH (1 | (FTDI_SIO_SET_DTR_MASK << 8)) |
| #define FTDI_SIO_SET_DTR_LOW (0 | (FTDI_SIO_SET_DTR_MASK << 8)) |
| #define FTDI_SIO_SET_RTS_MASK 0x2 |
| #define FTDI_SIO_SET_RTS_HIGH (2 | (FTDI_SIO_SET_RTS_MASK << 8)) |
| #define FTDI_SIO_SET_RTS_LOW (0 | (FTDI_SIO_SET_RTS_MASK << 8)) |
| |
| /* |
| * ControlValue |
| * B0 DTR state |
| * 0 = reset |
| * 1 = set |
| * B1 RTS state |
| * 0 = reset |
| * 1 = set |
| * B2..7 Reserved |
| * B8 DTR state enable |
| * 0 = ignore |
| * 1 = use DTR state |
| * B9 RTS state enable |
| * 0 = ignore |
| * 1 = use RTS state |
| * B10..15 Reserved |
| */ |
| |
| /* FTDI_SIO_SET_FLOW_CTRL */ |
| #define FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE 0x40 |
| #define FTDI_SIO_SET_FLOW_CTRL_REQUEST FTDI_SIO_SET_FLOW_CTRL |
| #define FTDI_SIO_DISABLE_FLOW_CTRL 0x0 |
| #define FTDI_SIO_RTS_CTS_HS (0x1 << 8) |
| #define FTDI_SIO_DTR_DSR_HS (0x2 << 8) |
| #define FTDI_SIO_XON_XOFF_HS (0x4 << 8) |
| /* |
| * BmRequestType: 0100 0000b |
| * bRequest: FTDI_SIO_SET_FLOW_CTRL |
| * wValue: Xoff/Xon |
| * wIndex: Protocol/Port - hIndex is protocl / lIndex is port |
| * wLength: 0 |
| * Data: None |
| * |
| * hIndex protocol is: |
| * B0 Output handshaking using RTS/CTS |
| * 0 = disabled |
| * 1 = enabled |
| * B1 Output handshaking using DTR/DSR |
| * 0 = disabled |
| * 1 = enabled |
| * B2 Xon/Xoff handshaking |
| * 0 = disabled |
| * 1 = enabled |
| * |
| * A value of zero in the hIndex field disables handshaking |
| * |
| * If Xon/Xoff handshaking is specified, the hValue field should contain the XOFF character |
| * and the lValue field contains the XON character. |
| */ |
| |
| /* |
| * FTDI_SIO_GET_LATENCY_TIMER |
| * |
| * Set the timeout interval. The FTDI collects data from the slave |
| * device, transmitting it to the host when either A) 62 bytes are |
| * received, or B) the timeout interval has elapsed and the buffer |
| * contains at least 1 byte. Setting this value to a small number |
| * can dramatically improve performance for applications which send |
| * small packets, since the default value is 16ms. |
| */ |
| #define FTDI_SIO_GET_LATENCY_TIMER_REQUEST FTDI_SIO_GET_LATENCY_TIMER |
| #define FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE 0xC0 |
| |
| /* |
| * BmRequestType: 1100 0000b |
| * bRequest: FTDI_SIO_GET_LATENCY_TIMER |
| * wValue: 0 |
| * wIndex: Port |
| * wLength: 0 |
| * Data: latency (on return) |
| */ |
| |
| /* |
| * FTDI_SIO_SET_LATENCY_TIMER |
| * |
| * Set the timeout interval. The FTDI collects data from the slave |
| * device, transmitting it to the host when either A) 62 bytes are |
| * received, or B) the timeout interval has elapsed and the buffer |
| * contains at least 1 byte. Setting this value to a small number |
| * can dramatically improve performance for applications which send |
| * small packets, since the default value is 16ms. |
| */ |
| #define FTDI_SIO_SET_LATENCY_TIMER_REQUEST FTDI_SIO_SET_LATENCY_TIMER |
| #define FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE 0x40 |
| |
| /* |
| * BmRequestType: 0100 0000b |
| * bRequest: FTDI_SIO_SET_LATENCY_TIMER |
| * wValue: Latency (milliseconds) |
| * wIndex: Port |
| * wLength: 0 |
| * Data: None |
| * |
| * wValue: |
| * B0..7 Latency timer |
| * B8..15 0 |
| * |
| */ |
| |
| /* |
| * FTDI_SIO_SET_EVENT_CHAR |
| * |
| * Set the special event character for the specified communications port. |
| * If the device sees this character it will immediately return the |
| * data read so far - rather than wait 40ms or until 62 bytes are read |
| * which is what normally happens. |
| */ |
| |
| |
| #define FTDI_SIO_SET_EVENT_CHAR_REQUEST FTDI_SIO_SET_EVENT_CHAR |
| #define FTDI_SIO_SET_EVENT_CHAR_REQUEST_TYPE 0x40 |
| |
| |
| /* |
| * BmRequestType: 0100 0000b |
| * bRequest: FTDI_SIO_SET_EVENT_CHAR |
| * wValue: EventChar |
| * wIndex: Port |
| * wLength: 0 |
| * Data: None |
| * |
| * wValue: |
| * B0..7 Event Character |
| * B8 Event Character Processing |
| * 0 = disabled |
| * 1 = enabled |
| * B9..15 Reserved |
| * |
| */ |
| |
| /* FTDI_SIO_SET_ERROR_CHAR */ |
| |
| /* Set the parity error replacement character for the specified communications port */ |
| |
| /* |
| * BmRequestType: 0100 0000b |
| * bRequest: FTDI_SIO_SET_EVENT_CHAR |
| * wValue: Error Char |
| * wIndex: Port |
| * wLength: 0 |
| * Data: None |
| * |
| *Error Char |
| * B0..7 Error Character |
| * B8 Error Character Processing |
| * 0 = disabled |
| * 1 = enabled |
| * B9..15 Reserved |
| * |
| */ |
| |
| /* FTDI_SIO_GET_MODEM_STATUS */ |
| /* Retrieve the current value of the modem status register */ |
| |
| #define FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE 0xc0 |
| #define FTDI_SIO_GET_MODEM_STATUS_REQUEST FTDI_SIO_GET_MODEM_STATUS |
| #define FTDI_SIO_CTS_MASK 0x10 |
| #define FTDI_SIO_DSR_MASK 0x20 |
| #define FTDI_SIO_RI_MASK 0x40 |
| #define FTDI_SIO_RLSD_MASK 0x80 |
| /* |
| * BmRequestType: 1100 0000b |
| * bRequest: FTDI_SIO_GET_MODEM_STATUS |
| * wValue: zero |
| * wIndex: Port |
| * wLength: 1 |
| * Data: Status |
| * |
| * One byte of data is returned |
| * B0..3 0 |
| * B4 CTS |
| * 0 = inactive |
| * 1 = active |
| * B5 DSR |
| * 0 = inactive |
| * 1 = active |
| * B6 Ring Indicator (RI) |
| * 0 = inactive |
| * 1 = active |
| * B7 Receive Line Signal Detect (RLSD) |
| * 0 = inactive |
| * 1 = active |
| */ |
| |
| |
| |
| /* Descriptors returned by the device |
| * |
| * Device Descriptor |
| * |
| * Offset Field Size Value Description |
| * 0 bLength 1 0x12 Size of descriptor in bytes |
| * 1 bDescriptorType 1 0x01 DEVICE Descriptor Type |
| * 2 bcdUSB 2 0x0110 USB Spec Release Number |
| * 4 bDeviceClass 1 0x00 Class Code |
| * 5 bDeviceSubClass 1 0x00 SubClass Code |
| * 6 bDeviceProtocol 1 0x00 Protocol Code |
| * 7 bMaxPacketSize0 1 0x08 Maximum packet size for endpoint 0 |
| * 8 idVendor 2 0x0403 Vendor ID |
| * 10 idProduct 2 0x8372 Product ID (FTDI_SIO_PID) |
| * 12 bcdDevice 2 0x0001 Device release number |
| * 14 iManufacturer 1 0x01 Index of man. string desc |
| * 15 iProduct 1 0x02 Index of prod string desc |
| * 16 iSerialNumber 1 0x02 Index of serial nmr string desc |
| * 17 bNumConfigurations 1 0x01 Number of possible configurations |
| * |
| * Configuration Descriptor |
| * |
| * Offset Field Size Value |
| * 0 bLength 1 0x09 Size of descriptor in bytes |
| * 1 bDescriptorType 1 0x02 CONFIGURATION Descriptor Type |
| * 2 wTotalLength 2 0x0020 Total length of data |
| * 4 bNumInterfaces 1 0x01 Number of interfaces supported |
| * 5 bConfigurationValue 1 0x01 Argument for SetCOnfiguration() req |
| * 6 iConfiguration 1 0x02 Index of config string descriptor |
| * 7 bmAttributes 1 0x20 Config characteristics Remote Wakeup |
| * 8 MaxPower 1 0x1E Max power consumption |
| * |
| * Interface Descriptor |
| * |
| * Offset Field Size Value |
| * 0 bLength 1 0x09 Size of descriptor in bytes |
| * 1 bDescriptorType 1 0x04 INTERFACE Descriptor Type |
| * 2 bInterfaceNumber 1 0x00 Number of interface |
| * 3 bAlternateSetting 1 0x00 Value used to select alternate |
| * 4 bNumEndpoints 1 0x02 Number of endpoints |
| * 5 bInterfaceClass 1 0xFF Class Code |
| * 6 bInterfaceSubClass 1 0xFF Subclass Code |
| * 7 bInterfaceProtocol 1 0xFF Protocol Code |
| * 8 iInterface 1 0x02 Index of interface string description |
| * |
| * IN Endpoint Descriptor |
| * |
| * Offset Field Size Value |
| * 0 bLength 1 0x07 Size of descriptor in bytes |
| * 1 bDescriptorType 1 0x05 ENDPOINT descriptor type |
| * 2 bEndpointAddress 1 0x82 Address of endpoint |
| * 3 bmAttributes 1 0x02 Endpoint attributes - Bulk |
| * 4 bNumEndpoints 2 0x0040 maximum packet size |
| * 5 bInterval 1 0x00 Interval for polling endpoint |
| * |
| * OUT Endpoint Descriptor |
| * |
| * Offset Field Size Value |
| * 0 bLength 1 0x07 Size of descriptor in bytes |
| * 1 bDescriptorType 1 0x05 ENDPOINT descriptor type |
| * 2 bEndpointAddress 1 0x02 Address of endpoint |
| * 3 bmAttributes 1 0x02 Endpoint attributes - Bulk |
| * 4 bNumEndpoints 2 0x0040 maximum packet size |
| * 5 bInterval 1 0x00 Interval for polling endpoint |
| * |
| * DATA FORMAT |
| * |
| * IN Endpoint |
| * |
| * The device reserves the first two bytes of data on this endpoint to contain the current |
| * values of the modem and line status registers. In the absence of data, the device |
| * generates a message consisting of these two status bytes every 40 ms |
| * |
| * Byte 0: Modem Status |
| * |
| * Offset Description |
| * B0 Reserved - must be 1 |
| * B1 Reserved - must be 0 |
| * B2 Reserved - must be 0 |
| * B3 Reserved - must be 0 |
| * B4 Clear to Send (CTS) |
| * B5 Data Set Ready (DSR) |
| * B6 Ring Indicator (RI) |
| * B7 Receive Line Signal Detect (RLSD) |
| * |
| * Byte 1: Line Status |
| * |
| * Offset Description |
| * B0 Data Ready (DR) |
| * B1 Overrun Error (OE) |
| * B2 Parity Error (PE) |
| * B3 Framing Error (FE) |
| * B4 Break Interrupt (BI) |
| * B5 Transmitter Holding Register (THRE) |
| * B6 Transmitter Empty (TEMT) |
| * B7 Error in RCVR FIFO |
| * |
| */ |
| #define FTDI_RS0_CTS (1 << 4) |
| #define FTDI_RS0_DSR (1 << 5) |
| #define FTDI_RS0_RI (1 << 6) |
| #define FTDI_RS0_RLSD (1 << 7) |
| |
| #define FTDI_RS_DR 1 |
| #define FTDI_RS_OE (1<<1) |
| #define FTDI_RS_PE (1<<2) |
| #define FTDI_RS_FE (1<<3) |
| #define FTDI_RS_BI (1<<4) |
| #define FTDI_RS_THRE (1<<5) |
| #define FTDI_RS_TEMT (1<<6) |
| #define FTDI_RS_FIFO (1<<7) |
| |
| /* |
| * OUT Endpoint |
| * |
| * This device reserves the first bytes of data on this endpoint contain the length |
| * and port identifier of the message. For the FTDI USB Serial converter the port |
| * identifier is always 1. |
| * |
| * Byte 0: Line Status |
| * |
| * Offset Description |
| * B0 Reserved - must be 1 |
| * B1 Reserved - must be 0 |
| * B2..7 Length of message - (not including Byte 0) |
| * |
| */ |
| |
