| /* |
| * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. |
| * Copyright 2008 Juergen Beisert, kernel@pengutronix.de |
| * Copyright 2008 Martin Fuzzey, mfuzzey@gmail.com |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version 2 |
| * of the License, or (at your option) any later version. |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, |
| * MA 02110-1301, USA. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/io.h> |
| #include <linux/module.h> |
| |
| #include <asm/clkdev.h> |
| #include <asm/div64.h> |
| |
| #include <mach/clock.h> |
| #include <mach/common.h> |
| #include <mach/hardware.h> |
| |
| /* Register offsets */ |
| #define CCM_CSCR (IO_ADDRESS(CCM_BASE_ADDR) + 0x0) |
| #define CCM_MPCTL0 (IO_ADDRESS(CCM_BASE_ADDR) + 0x4) |
| #define CCM_MPCTL1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x8) |
| #define CCM_SPCTL0 (IO_ADDRESS(CCM_BASE_ADDR) + 0xC) |
| #define CCM_SPCTL1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x10) |
| #define CCM_OSC26MCTL (IO_ADDRESS(CCM_BASE_ADDR) + 0x14) |
| #define CCM_PCDR0 (IO_ADDRESS(CCM_BASE_ADDR) + 0x18) |
| #define CCM_PCDR1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x1c) |
| #define CCM_PCCR0 (IO_ADDRESS(CCM_BASE_ADDR) + 0x20) |
| #define CCM_PCCR1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x24) |
| #define CCM_CCSR (IO_ADDRESS(CCM_BASE_ADDR) + 0x28) |
| #define CCM_PMCTL (IO_ADDRESS(CCM_BASE_ADDR) + 0x2c) |
| #define CCM_PMCOUNT (IO_ADDRESS(CCM_BASE_ADDR) + 0x30) |
| #define CCM_WKGDCTL (IO_ADDRESS(CCM_BASE_ADDR) + 0x34) |
| |
| #define CCM_CSCR_UPDATE_DIS (1 << 31) |
| #define CCM_CSCR_SSI2 (1 << 23) |
| #define CCM_CSCR_SSI1 (1 << 22) |
| #define CCM_CSCR_VPU (1 << 21) |
| #define CCM_CSCR_MSHC (1 << 20) |
| #define CCM_CSCR_SPLLRES (1 << 19) |
| #define CCM_CSCR_MPLLRES (1 << 18) |
| #define CCM_CSCR_SP (1 << 17) |
| #define CCM_CSCR_MCU (1 << 16) |
| #define CCM_CSCR_OSC26MDIV (1 << 4) |
| #define CCM_CSCR_OSC26M (1 << 3) |
| #define CCM_CSCR_FPM (1 << 2) |
| #define CCM_CSCR_SPEN (1 << 1) |
| #define CCM_CSCR_MPEN (1 << 0) |
| |
| /* i.MX27 TO 2+ */ |
| #define CCM_CSCR_ARM_SRC (1 << 15) |
| |
| #define CCM_SPCTL1_LF (1 << 15) |
| #define CCM_SPCTL1_BRMO (1 << 6) |
| |
| static struct clk mpll_main1_clk, mpll_main2_clk; |
| |
| static int clk_pccr_enable(struct clk *clk) |
| { |
| unsigned long reg; |
| |
| if (!clk->enable_reg) |
| return 0; |
| |
| reg = __raw_readl(clk->enable_reg); |
| reg |= 1 << clk->enable_shift; |
| __raw_writel(reg, clk->enable_reg); |
| |
| return 0; |
| } |
| |
| static void clk_pccr_disable(struct clk *clk) |
| { |
| unsigned long reg; |
| |
| if (!clk->enable_reg) |
| return; |
| |
| reg = __raw_readl(clk->enable_reg); |
| reg &= ~(1 << clk->enable_shift); |
| __raw_writel(reg, clk->enable_reg); |
| } |
| |
| static int clk_spll_enable(struct clk *clk) |
| { |
| unsigned long reg; |
| |
| reg = __raw_readl(CCM_CSCR); |
| reg |= CCM_CSCR_SPEN; |
| __raw_writel(reg, CCM_CSCR); |
| |
| while (!(__raw_readl(CCM_SPCTL1) & CCM_SPCTL1_LF)); |
| |
| return 0; |
| } |
| |
| static void clk_spll_disable(struct clk *clk) |
| { |
| unsigned long reg; |
| |
| reg = __raw_readl(CCM_CSCR); |
| reg &= ~CCM_CSCR_SPEN; |
| __raw_writel(reg, CCM_CSCR); |
| } |
| |
| static int clk_cpu_set_parent(struct clk *clk, struct clk *parent) |
| { |
| int cscr = __raw_readl(CCM_CSCR); |
| |
| if (clk->parent == parent) |
| return 0; |
| |
| if (mx27_revision() >= CHIP_REV_2_0) { |
| if (parent == &mpll_main1_clk) { |
| cscr |= CCM_CSCR_ARM_SRC; |
| } else { |
| if (parent == &mpll_main2_clk) |
| cscr &= ~CCM_CSCR_ARM_SRC; |
| else |
| return -EINVAL; |
| } |
| __raw_writel(cscr, CCM_CSCR); |
| clk->parent = parent; |
| return 0; |
| } |
| return -ENODEV; |
| } |
| |
| static unsigned long round_rate_cpu(struct clk *clk, unsigned long rate) |
| { |
| int div; |
| unsigned long parent_rate; |
| |
| parent_rate = clk_get_rate(clk->parent); |
| |
| div = parent_rate / rate; |
| if (parent_rate % rate) |
| div++; |
| |
| if (div > 4) |
| div = 4; |
| |
| return parent_rate / div; |
| } |
| |
| static int set_rate_cpu(struct clk *clk, unsigned long rate) |
| { |
| unsigned int div; |
| uint32_t reg; |
| unsigned long parent_rate; |
| |
| parent_rate = clk_get_rate(clk->parent); |
| |
| div = parent_rate / rate; |
| |
| if (div > 4 || div < 1 || ((parent_rate / div) != rate)) |
| return -EINVAL; |
| |
| div--; |
| |
| reg = __raw_readl(CCM_CSCR); |
| if (mx27_revision() >= CHIP_REV_2_0) { |
| reg &= ~(3 << 12); |
| reg |= div << 12; |
| reg &= ~(CCM_CSCR_FPM | CCM_CSCR_SPEN); |
| __raw_writel(reg | CCM_CSCR_UPDATE_DIS, CCM_CSCR); |
| } else { |
| printk(KERN_ERR "Can't set CPU frequency!\n"); |
| } |
| |
| return 0; |
| } |
| |
| static unsigned long round_rate_per(struct clk *clk, unsigned long rate) |
| { |
| u32 div; |
| unsigned long parent_rate; |
| |
| parent_rate = clk_get_rate(clk->parent); |
| |
| div = parent_rate / rate; |
| if (parent_rate % rate) |
| div++; |
| |
| if (div > 64) |
| div = 64; |
| |
| return parent_rate / div; |
| } |
| |
| static int set_rate_per(struct clk *clk, unsigned long rate) |
| { |
| u32 reg; |
| u32 div; |
| unsigned long parent_rate; |
| |
| parent_rate = clk_get_rate(clk->parent); |
| |
| if (clk->id < 0 || clk->id > 3) |
| return -EINVAL; |
| |
| div = parent_rate / rate; |
| if (div > 64 || div < 1 || ((parent_rate / div) != rate)) |
| return -EINVAL; |
| div--; |
| |
| reg = __raw_readl(CCM_PCDR1) & ~(0x3f << (clk->id << 3)); |
| reg |= div << (clk->id << 3); |
| __raw_writel(reg, CCM_PCDR1); |
| |
| return 0; |
| } |
| |
| static unsigned long get_rate_usb(struct clk *clk) |
| { |
| unsigned long usb_pdf; |
| unsigned long parent_rate; |
| |
| parent_rate = clk_get_rate(clk->parent); |
| |
| usb_pdf = (__raw_readl(CCM_CSCR) >> 28) & 0x7; |
| |
| return parent_rate / (usb_pdf + 1U); |
| } |
| |
| static unsigned long get_rate_ssix(struct clk *clk, unsigned long pdf) |
| { |
| unsigned long parent_rate; |
| |
| parent_rate = clk_get_rate(clk->parent); |
| |
| if (mx27_revision() >= CHIP_REV_2_0) |
| pdf += 4; /* MX27 TO2+ */ |
| else |
| pdf = (pdf < 2) ? 124UL : pdf; /* MX21 & MX27 TO1 */ |
| |
| return 2UL * parent_rate / pdf; |
| } |
| |
| static unsigned long get_rate_ssi1(struct clk *clk) |
| { |
| return get_rate_ssix(clk, (__raw_readl(CCM_PCDR0) >> 16) & 0x3f); |
| } |
| |
| static unsigned long get_rate_ssi2(struct clk *clk) |
| { |
| return get_rate_ssix(clk, (__raw_readl(CCM_PCDR0) >> 26) & 0x3f); |
| } |
| |
| static unsigned long get_rate_nfc(struct clk *clk) |
| { |
| unsigned long nfc_pdf; |
| unsigned long parent_rate; |
| |
| parent_rate = clk_get_rate(clk->parent); |
| |
| if (mx27_revision() >= CHIP_REV_2_0) |
| nfc_pdf = (__raw_readl(CCM_PCDR0) >> 6) & 0xf; |
| else |
| nfc_pdf = (__raw_readl(CCM_PCDR0) >> 12) & 0xf; |
| |
| return parent_rate / (nfc_pdf + 1); |
| } |
| |
| static unsigned long get_rate_vpu(struct clk *clk) |
| { |
| unsigned long vpu_pdf; |
| unsigned long parent_rate; |
| |
| parent_rate = clk_get_rate(clk->parent); |
| |
| if (mx27_revision() >= CHIP_REV_2_0) { |
| vpu_pdf = (__raw_readl(CCM_PCDR0) >> 10) & 0x3f; |
| vpu_pdf += 4; |
| } else { |
| vpu_pdf = (__raw_readl(CCM_PCDR0) >> 8) & 0xf; |
| vpu_pdf = (vpu_pdf < 2) ? 124 : vpu_pdf; |
| } |
| |
| return 2UL * parent_rate / vpu_pdf; |
| } |
| |
| static unsigned long round_rate_parent(struct clk *clk, unsigned long rate) |
| { |
| return clk->parent->round_rate(clk->parent, rate); |
| } |
| |
| static unsigned long get_rate_parent(struct clk *clk) |
| { |
| return clk_get_rate(clk->parent); |
| } |
| |
| static int set_rate_parent(struct clk *clk, unsigned long rate) |
| { |
| return clk->parent->set_rate(clk->parent, rate); |
| } |
| |
| /* in Hz */ |
| static unsigned long external_high_reference = 26000000; |
| |
| static unsigned long get_rate_high_reference(struct clk *clk) |
| { |
| return external_high_reference; |
| } |
| |
| /* in Hz */ |
| static unsigned long external_low_reference = 32768; |
| |
| static unsigned long get_rate_low_reference(struct clk *clk) |
| { |
| return external_low_reference; |
| } |
| |
| static unsigned long get_rate_fpm(struct clk *clk) |
| { |
| return clk_get_rate(clk->parent) * 1024; |
| } |
| |
| static unsigned long get_rate_mpll(struct clk *clk) |
| { |
| return mxc_decode_pll(__raw_readl(CCM_MPCTL0), |
| clk_get_rate(clk->parent)); |
| } |
| |
| static unsigned long get_rate_mpll_main(struct clk *clk) |
| { |
| unsigned long parent_rate; |
| |
| parent_rate = clk_get_rate(clk->parent); |
| |
| /* i.MX27 TO2: |
| * clk->id == 0: arm clock source path 1 which is from 2 * MPLL / 2 |
| * clk->id == 1: arm clock source path 2 which is from 2 * MPLL / 3 |
| */ |
| if (mx27_revision() >= CHIP_REV_2_0 && clk->id == 1) |
| return 2UL * parent_rate / 3UL; |
| |
| return parent_rate; |
| } |
| |
| static unsigned long get_rate_spll(struct clk *clk) |
| { |
| uint32_t reg; |
| unsigned long rate; |
| |
| rate = clk_get_rate(clk->parent); |
| |
| reg = __raw_readl(CCM_SPCTL0); |
| |
| /* On TO2 we have to write the value back. Otherwise we |
| * read 0 from this register the next time. |
| */ |
| if (mx27_revision() >= CHIP_REV_2_0) |
| __raw_writel(reg, CCM_SPCTL0); |
| |
| return mxc_decode_pll(reg, rate); |
| } |
| |
| static unsigned long get_rate_cpu(struct clk *clk) |
| { |
| u32 div; |
| unsigned long rate; |
| |
| if (mx27_revision() >= CHIP_REV_2_0) |
| div = (__raw_readl(CCM_CSCR) >> 12) & 0x3; |
| else |
| div = (__raw_readl(CCM_CSCR) >> 13) & 0x7; |
| |
| rate = clk_get_rate(clk->parent); |
| return rate / (div + 1); |
| } |
| |
| static unsigned long get_rate_ahb(struct clk *clk) |
| { |
| unsigned long rate, bclk_pdf; |
| |
| if (mx27_revision() >= CHIP_REV_2_0) |
| bclk_pdf = (__raw_readl(CCM_CSCR) >> 8) & 0x3; |
| else |
| bclk_pdf = (__raw_readl(CCM_CSCR) >> 9) & 0xf; |
| |
| rate = clk_get_rate(clk->parent); |
| return rate / (bclk_pdf + 1); |
| } |
| |
| static unsigned long get_rate_ipg(struct clk *clk) |
| { |
| unsigned long rate, ipg_pdf; |
| |
| if (mx27_revision() >= CHIP_REV_2_0) |
| return clk_get_rate(clk->parent); |
| else |
| ipg_pdf = (__raw_readl(CCM_CSCR) >> 8) & 1; |
| |
| rate = clk_get_rate(clk->parent); |
| return rate / (ipg_pdf + 1); |
| } |
| |
| static unsigned long get_rate_per(struct clk *clk) |
| { |
| unsigned long perclk_pdf, parent_rate; |
| |
| parent_rate = clk_get_rate(clk->parent); |
| |
| if (clk->id < 0 || clk->id > 3) |
| return 0; |
| |
| perclk_pdf = (__raw_readl(CCM_PCDR1) >> (clk->id << 3)) & 0x3f; |
| |
| return parent_rate / (perclk_pdf + 1); |
| } |
| |
| /* |
| * the high frequency external clock reference |
| * Default case is 26MHz. Could be changed at runtime |
| * with a call to change_external_high_reference() |
| */ |
| static struct clk ckih_clk = { |
| .get_rate = get_rate_high_reference, |
| }; |
| |
| static struct clk mpll_clk = { |
| .parent = &ckih_clk, |
| .get_rate = get_rate_mpll, |
| }; |
| |
| /* For i.MX27 TO2, it is the MPLL path 1 of ARM core |
| * It provides the clock source whose rate is same as MPLL |
| */ |
| static struct clk mpll_main1_clk = { |
| .id = 0, |
| .parent = &mpll_clk, |
| .get_rate = get_rate_mpll_main, |
| }; |
| |
| /* For i.MX27 TO2, it is the MPLL path 2 of ARM core |
| * It provides the clock source whose rate is same MPLL * 2 / 3 |
| */ |
| static struct clk mpll_main2_clk = { |
| .id = 1, |
| .parent = &mpll_clk, |
| .get_rate = get_rate_mpll_main, |
| }; |
| |
| static struct clk ahb_clk = { |
| .parent = &mpll_main2_clk, |
| .get_rate = get_rate_ahb, |
| }; |
| |
| static struct clk ipg_clk = { |
| .parent = &ahb_clk, |
| .get_rate = get_rate_ipg, |
| }; |
| |
| static struct clk cpu_clk = { |
| .parent = &mpll_main2_clk, |
| .set_parent = clk_cpu_set_parent, |
| .round_rate = round_rate_cpu, |
| .get_rate = get_rate_cpu, |
| .set_rate = set_rate_cpu, |
| }; |
| |
| static struct clk spll_clk = { |
| .parent = &ckih_clk, |
| .get_rate = get_rate_spll, |
| .enable = clk_spll_enable, |
| .disable = clk_spll_disable, |
| }; |
| |
| /* |
| * the low frequency external clock reference |
| * Default case is 32.768kHz. |
| */ |
| static struct clk ckil_clk = { |
| .get_rate = get_rate_low_reference, |
| }; |
| |
| /* Output of frequency pre multiplier */ |
| static struct clk fpm_clk = { |
| .parent = &ckil_clk, |
| .get_rate = get_rate_fpm, |
| }; |
| |
| #define PCCR0 CCM_PCCR0 |
| #define PCCR1 CCM_PCCR1 |
| |
| #define DEFINE_CLOCK(name, i, er, es, gr, s, p) \ |
| static struct clk name = { \ |
| .id = i, \ |
| .enable_reg = er, \ |
| .enable_shift = es, \ |
| .get_rate = gr, \ |
| .enable = clk_pccr_enable, \ |
| .disable = clk_pccr_disable, \ |
| .secondary = s, \ |
| .parent = p, \ |
| } |
| |
| #define DEFINE_CLOCK1(name, i, er, es, getsetround, s, p) \ |
| static struct clk name = { \ |
| .id = i, \ |
| .enable_reg = er, \ |
| .enable_shift = es, \ |
| .get_rate = get_rate_##getsetround, \ |
| .set_rate = set_rate_##getsetround, \ |
| .round_rate = round_rate_##getsetround, \ |
| .enable = clk_pccr_enable, \ |
| .disable = clk_pccr_disable, \ |
| .secondary = s, \ |
| .parent = p, \ |
| } |
| |
| /* Forward declaration to keep the following list in order */ |
| static struct clk slcdc_clk1, sahara2_clk1, rtic_clk1, fec_clk1, emma_clk1, |
| dma_clk1, lcdc_clk2, vpu_clk1; |
| |
| /* All clocks we can gate through PCCRx in the order of PCCRx bits */ |
| DEFINE_CLOCK(ssi2_clk1, 1, PCCR0, 0, NULL, NULL, &ipg_clk); |
| DEFINE_CLOCK(ssi1_clk1, 0, PCCR0, 1, NULL, NULL, &ipg_clk); |
| DEFINE_CLOCK(slcdc_clk, 0, PCCR0, 2, NULL, &slcdc_clk1, &ahb_clk); |
| DEFINE_CLOCK(sdhc3_clk1, 0, PCCR0, 3, NULL, NULL, &ipg_clk); |
| DEFINE_CLOCK(sdhc2_clk1, 0, PCCR0, 4, NULL, NULL, &ipg_clk); |
| DEFINE_CLOCK(sdhc1_clk1, 0, PCCR0, 5, NULL, NULL, &ipg_clk); |
| DEFINE_CLOCK(scc_clk, 0, PCCR0, 6, NULL, NULL, &ipg_clk); |
| DEFINE_CLOCK(sahara2_clk, 0, PCCR0, 7, NULL, &sahara2_clk1, &ahb_clk); |
| DEFINE_CLOCK(rtic_clk, 0, PCCR0, 8, NULL, &rtic_clk1, &ahb_clk); |
| DEFINE_CLOCK(rtc_clk, 0, PCCR0, 9, NULL, NULL, &ipg_clk); |
| DEFINE_CLOCK(pwm_clk1, 0, PCCR0, 11, NULL, NULL, &ipg_clk); |
| DEFINE_CLOCK(owire_clk, 0, PCCR0, 12, NULL, NULL, &ipg_clk); |
| DEFINE_CLOCK(mstick_clk1, 0, PCCR0, 13, NULL, NULL, &ipg_clk); |
| DEFINE_CLOCK(lcdc_clk1, 0, PCCR0, 14, NULL, &lcdc_clk2, &ipg_clk); |
| DEFINE_CLOCK(kpp_clk, 0, PCCR0, 15, NULL, NULL, &ipg_clk); |
| DEFINE_CLOCK(iim_clk, 0, PCCR0, 16, NULL, NULL, &ipg_clk); |
| DEFINE_CLOCK(i2c2_clk, 1, PCCR0, 17, NULL, NULL, &ipg_clk); |
| DEFINE_CLOCK(i2c1_clk, 0, PCCR0, 18, NULL, NULL, &ipg_clk); |
| DEFINE_CLOCK(gpt6_clk1, 0, PCCR0, 29, NULL, NULL, &ipg_clk); |
| DEFINE_CLOCK(gpt5_clk1, 0, PCCR0, 20, NULL, NULL, &ipg_clk); |
| DEFINE_CLOCK(gpt4_clk1, 0, PCCR0, 21, NULL, NULL, &ipg_clk); |
| DEFINE_CLOCK(gpt3_clk1, 0, PCCR0, 22, NULL, NULL, &ipg_clk); |
| DEFINE_CLOCK(gpt2_clk1, 0, PCCR0, 23, NULL, NULL, &ipg_clk); |
| DEFINE_CLOCK(gpt1_clk1, 0, PCCR0, 24, NULL, NULL, &ipg_clk); |
| DEFINE_CLOCK(gpio_clk, 0, PCCR0, 25, NULL, NULL, &ipg_clk); |
| DEFINE_CLOCK(fec_clk, 0, PCCR0, 26, NULL, &fec_clk1, &ahb_clk); |
| DEFINE_CLOCK(emma_clk, 0, PCCR0, 27, NULL, &emma_clk1, &ahb_clk); |
| DEFINE_CLOCK(dma_clk, 0, PCCR0, 28, NULL, &dma_clk1, &ahb_clk); |
| DEFINE_CLOCK(cspi13_clk1, 0, PCCR0, 29, NULL, NULL, &ipg_clk); |
| DEFINE_CLOCK(cspi2_clk1, 0, PCCR0, 30, NULL, NULL, &ipg_clk); |
| DEFINE_CLOCK(cspi1_clk1, 0, PCCR0, 31, NULL, NULL, &ipg_clk); |
| |
| DEFINE_CLOCK(mstick_clk, 0, PCCR1, 2, NULL, &mstick_clk1, &ipg_clk); |
| DEFINE_CLOCK(nfc_clk, 0, PCCR1, 3, get_rate_nfc, NULL, &cpu_clk); |
| DEFINE_CLOCK(ssi2_clk, 1, PCCR1, 4, get_rate_ssi2, &ssi2_clk1, &mpll_main2_clk); |
| DEFINE_CLOCK(ssi1_clk, 0, PCCR1, 5, get_rate_ssi1, &ssi1_clk1, &mpll_main2_clk); |
| DEFINE_CLOCK(vpu_clk, 0, PCCR1, 6, get_rate_vpu, &vpu_clk1, &mpll_main2_clk); |
| DEFINE_CLOCK1(per4_clk, 3, PCCR1, 7, per, NULL, &mpll_main2_clk); |
| DEFINE_CLOCK1(per3_clk, 2, PCCR1, 8, per, NULL, &mpll_main2_clk); |
| DEFINE_CLOCK1(per2_clk, 1, PCCR1, 9, per, NULL, &mpll_main2_clk); |
| DEFINE_CLOCK1(per1_clk, 0, PCCR1, 10, per, NULL, &mpll_main2_clk); |
| DEFINE_CLOCK(usb_clk1, 0, PCCR1, 11, NULL, NULL, &ahb_clk); |
| DEFINE_CLOCK(slcdc_clk1, 0, PCCR1, 12, NULL, NULL, &ahb_clk); |
| DEFINE_CLOCK(sahara2_clk1, 0, PCCR1, 13, NULL, NULL, &ahb_clk); |
| DEFINE_CLOCK(rtic_clk1, 0, PCCR1, 14, NULL, NULL, &ahb_clk); |
| DEFINE_CLOCK(lcdc_clk2, 0, PCCR1, 15, NULL, NULL, &ahb_clk); |
| DEFINE_CLOCK(vpu_clk1, 0, PCCR1, 16, NULL, NULL, &ahb_clk); |
| DEFINE_CLOCK(fec_clk1, 0, PCCR1, 17, NULL, NULL, &ahb_clk); |
| DEFINE_CLOCK(emma_clk1, 0, PCCR1, 18, NULL, NULL, &ahb_clk); |
| DEFINE_CLOCK(emi_clk, 0, PCCR1, 19, NULL, NULL, &ahb_clk); |
| DEFINE_CLOCK(dma_clk1, 0, PCCR1, 20, NULL, NULL, &ahb_clk); |
| DEFINE_CLOCK(csi_clk1, 0, PCCR1, 21, NULL, NULL, &ahb_clk); |
| DEFINE_CLOCK(brom_clk, 0, PCCR1, 22, NULL, NULL, &ahb_clk); |
| DEFINE_CLOCK(ata_clk, 0, PCCR1, 23, NULL, NULL, &ahb_clk); |
| DEFINE_CLOCK(wdog_clk, 0, PCCR1, 24, NULL, NULL, &ipg_clk); |
| DEFINE_CLOCK(usb_clk, 0, PCCR1, 25, get_rate_usb, &usb_clk1, &spll_clk); |
| DEFINE_CLOCK(uart6_clk1, 0, PCCR1, 26, NULL, NULL, &ipg_clk); |
| DEFINE_CLOCK(uart5_clk1, 0, PCCR1, 27, NULL, NULL, &ipg_clk); |
| DEFINE_CLOCK(uart4_clk1, 0, PCCR1, 28, NULL, NULL, &ipg_clk); |
| DEFINE_CLOCK(uart3_clk1, 0, PCCR1, 29, NULL, NULL, &ipg_clk); |
| DEFINE_CLOCK(uart2_clk1, 0, PCCR1, 30, NULL, NULL, &ipg_clk); |
| DEFINE_CLOCK(uart1_clk1, 0, PCCR1, 31, NULL, NULL, &ipg_clk); |
| |
| /* Clocks we cannot directly gate, but drivers need their rates */ |
| DEFINE_CLOCK(cspi1_clk, 0, 0, 0, NULL, &cspi1_clk1, &per2_clk); |
| DEFINE_CLOCK(cspi2_clk, 1, 0, 0, NULL, &cspi2_clk1, &per2_clk); |
| DEFINE_CLOCK(cspi3_clk, 2, 0, 0, NULL, &cspi13_clk1, &per2_clk); |
| DEFINE_CLOCK(sdhc1_clk, 0, 0, 0, NULL, &sdhc1_clk1, &per2_clk); |
| DEFINE_CLOCK(sdhc2_clk, 1, 0, 0, NULL, &sdhc2_clk1, &per2_clk); |
| DEFINE_CLOCK(sdhc3_clk, 2, 0, 0, NULL, &sdhc3_clk1, &per2_clk); |
| DEFINE_CLOCK(pwm_clk, 0, 0, 0, NULL, &pwm_clk1, &per1_clk); |
| DEFINE_CLOCK(gpt1_clk, 0, 0, 0, NULL, &gpt1_clk1, &per1_clk); |
| DEFINE_CLOCK(gpt2_clk, 1, 0, 0, NULL, &gpt2_clk1, &per1_clk); |
| DEFINE_CLOCK(gpt3_clk, 2, 0, 0, NULL, &gpt3_clk1, &per1_clk); |
| DEFINE_CLOCK(gpt4_clk, 3, 0, 0, NULL, &gpt4_clk1, &per1_clk); |
| DEFINE_CLOCK(gpt5_clk, 4, 0, 0, NULL, &gpt5_clk1, &per1_clk); |
| DEFINE_CLOCK(gpt6_clk, 5, 0, 0, NULL, &gpt6_clk1, &per1_clk); |
| DEFINE_CLOCK(uart1_clk, 0, 0, 0, NULL, &uart1_clk1, &per1_clk); |
| DEFINE_CLOCK(uart2_clk, 1, 0, 0, NULL, &uart2_clk1, &per1_clk); |
| DEFINE_CLOCK(uart3_clk, 2, 0, 0, NULL, &uart3_clk1, &per1_clk); |
| DEFINE_CLOCK(uart4_clk, 3, 0, 0, NULL, &uart4_clk1, &per1_clk); |
| DEFINE_CLOCK(uart5_clk, 4, 0, 0, NULL, &uart5_clk1, &per1_clk); |
| DEFINE_CLOCK(uart6_clk, 5, 0, 0, NULL, &uart6_clk1, &per1_clk); |
| DEFINE_CLOCK1(lcdc_clk, 0, 0, 0, parent, &lcdc_clk1, &per3_clk); |
| DEFINE_CLOCK1(csi_clk, 0, 0, 0, parent, &csi_clk1, &per4_clk); |
| |
| #define _REGISTER_CLOCK(d, n, c) \ |
| { \ |
| .dev_id = d, \ |
| .con_id = n, \ |
| .clk = &c, \ |
| }, |
| |
| static struct clk_lookup lookups[] = { |
| _REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk) |
| _REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk) |
| _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk) |
| _REGISTER_CLOCK("imx-uart.3", NULL, uart4_clk) |
| _REGISTER_CLOCK("imx-uart.4", NULL, uart5_clk) |
| _REGISTER_CLOCK("imx-uart.5", NULL, uart6_clk) |
| _REGISTER_CLOCK(NULL, "gpt1", gpt1_clk) |
| _REGISTER_CLOCK(NULL, "gpt2", gpt2_clk) |
| _REGISTER_CLOCK(NULL, "gpt3", gpt3_clk) |
| _REGISTER_CLOCK(NULL, "gpt4", gpt4_clk) |
| _REGISTER_CLOCK(NULL, "gpt5", gpt5_clk) |
| _REGISTER_CLOCK(NULL, "gpt6", gpt6_clk) |
| _REGISTER_CLOCK("mxc_pwm.0", NULL, pwm_clk) |
| _REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc1_clk) |
| _REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc2_clk) |
| _REGISTER_CLOCK("mxc-mmc.2", NULL, sdhc3_clk) |
| _REGISTER_CLOCK(NULL, "cspi1", cspi1_clk) |
| _REGISTER_CLOCK(NULL, "cspi2", cspi2_clk) |
| _REGISTER_CLOCK(NULL, "cspi3", cspi3_clk) |
| _REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk) |
| _REGISTER_CLOCK(NULL, "csi", csi_clk) |
| _REGISTER_CLOCK(NULL, "usb", usb_clk) |
| _REGISTER_CLOCK(NULL, "ssi1", ssi1_clk) |
| _REGISTER_CLOCK(NULL, "ssi2", ssi2_clk) |
| _REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk) |
| _REGISTER_CLOCK(NULL, "vpu", vpu_clk) |
| _REGISTER_CLOCK(NULL, "dma", dma_clk) |
| _REGISTER_CLOCK(NULL, "rtic", rtic_clk) |
| _REGISTER_CLOCK(NULL, "brom", brom_clk) |
| _REGISTER_CLOCK(NULL, "emma", emma_clk) |
| _REGISTER_CLOCK(NULL, "slcdc", slcdc_clk) |
| _REGISTER_CLOCK("fec.0", NULL, fec_clk) |
| _REGISTER_CLOCK(NULL, "emi", emi_clk) |
| _REGISTER_CLOCK(NULL, "sahara2", sahara2_clk) |
| _REGISTER_CLOCK(NULL, "ata", ata_clk) |
| _REGISTER_CLOCK(NULL, "mstick", mstick_clk) |
| _REGISTER_CLOCK(NULL, "wdog", wdog_clk) |
| _REGISTER_CLOCK(NULL, "gpio", gpio_clk) |
| _REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk) |
| _REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk) |
| _REGISTER_CLOCK(NULL, "iim", iim_clk) |
| _REGISTER_CLOCK(NULL, "kpp", kpp_clk) |
| _REGISTER_CLOCK("mxc_w1.0", NULL, owire_clk) |
| _REGISTER_CLOCK(NULL, "rtc", rtc_clk) |
| _REGISTER_CLOCK(NULL, "scc", scc_clk) |
| }; |
| |
| /* Adjust the clock path for TO2 and later */ |
| static void __init to2_adjust_clocks(void) |
| { |
| unsigned long cscr = __raw_readl(CCM_CSCR); |
| |
| if (mx27_revision() >= CHIP_REV_2_0) { |
| if (cscr & CCM_CSCR_ARM_SRC) |
| cpu_clk.parent = &mpll_main1_clk; |
| |
| if (!(cscr & CCM_CSCR_SSI2)) |
| ssi1_clk.parent = &spll_clk; |
| |
| if (!(cscr & CCM_CSCR_SSI1)) |
| ssi1_clk.parent = &spll_clk; |
| |
| if (!(cscr & CCM_CSCR_VPU)) |
| vpu_clk.parent = &spll_clk; |
| } else { |
| cpu_clk.parent = &mpll_clk; |
| cpu_clk.set_parent = NULL; |
| cpu_clk.round_rate = NULL; |
| cpu_clk.set_rate = NULL; |
| ahb_clk.parent = &mpll_clk; |
| |
| per1_clk.parent = &mpll_clk; |
| per2_clk.parent = &mpll_clk; |
| per3_clk.parent = &mpll_clk; |
| per4_clk.parent = &mpll_clk; |
| |
| ssi1_clk.parent = &mpll_clk; |
| ssi2_clk.parent = &mpll_clk; |
| |
| vpu_clk.parent = &mpll_clk; |
| } |
| } |
| |
| /* |
| * must be called very early to get information about the |
| * available clock rate when the timer framework starts |
| */ |
| int __init mx27_clocks_init(unsigned long fref) |
| { |
| u32 cscr = __raw_readl(CCM_CSCR); |
| int i; |
| |
| external_high_reference = fref; |
| |
| /* detect clock reference for both system PLLs */ |
| if (cscr & CCM_CSCR_MCU) |
| mpll_clk.parent = &ckih_clk; |
| else |
| mpll_clk.parent = &fpm_clk; |
| |
| if (cscr & CCM_CSCR_SP) |
| spll_clk.parent = &ckih_clk; |
| else |
| spll_clk.parent = &fpm_clk; |
| |
| to2_adjust_clocks(); |
| |
| for (i = 0; i < ARRAY_SIZE(lookups); i++) |
| clkdev_add(&lookups[i]); |
| |
| /* Turn off all clocks we do not need */ |
| __raw_writel(0, CCM_PCCR0); |
| __raw_writel((1 << 10) | (1 << 19), CCM_PCCR1); |
| |
| spll_clk.disable(&spll_clk); |
| |
| /* enable basic clocks */ |
| clk_enable(&per1_clk); |
| clk_enable(&gpio_clk); |
| clk_enable(&emi_clk); |
| clk_enable(&iim_clk); |
| |
| #ifdef CONFIG_DEBUG_LL_CONSOLE |
| clk_enable(&uart1_clk); |
| #endif |
| |
| mxc_timer_init(&gpt1_clk); |
| |
| return 0; |
| } |
| |