| /* |
| * Samsung S5P G2D - 2D Graphics Accelerator Driver |
| * |
| * Copyright (c) 2011 Samsung Electronics Co., Ltd. |
| * Kamil Debski, <k.debski@samsung.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the |
| * License, or (at your option) any later version |
| */ |
| |
| #include <linux/io.h> |
| |
| #include "g2d.h" |
| #include "g2d-regs.h" |
| |
| #define w(x, a) writel((x), d->regs + (a)) |
| #define r(a) readl(d->regs + (a)) |
| |
| /* g2d_reset clears all g2d registers */ |
| void g2d_reset(struct g2d_dev *d) |
| { |
| w(1, SOFT_RESET_REG); |
| } |
| |
| void g2d_set_src_size(struct g2d_dev *d, struct g2d_frame *f) |
| { |
| u32 n; |
| |
| w(f->stride & 0xFFFF, SRC_STRIDE_REG); |
| |
| n = f->o_height & 0xFFF; |
| n <<= 16; |
| n |= f->o_width & 0xFFF; |
| w(n, SRC_LEFT_TOP_REG); |
| |
| n = f->bottom & 0xFFF; |
| n <<= 16; |
| n |= f->right & 0xFFF; |
| w(n, SRC_RIGHT_BOTTOM_REG); |
| |
| w(f->fmt->hw, SRC_COLOR_MODE_REG); |
| } |
| |
| void g2d_set_src_addr(struct g2d_dev *d, dma_addr_t a) |
| { |
| w(a, SRC_BASE_ADDR_REG); |
| } |
| |
| void g2d_set_dst_size(struct g2d_dev *d, struct g2d_frame *f) |
| { |
| u32 n; |
| |
| w(f->stride & 0xFFFF, DST_STRIDE_REG); |
| |
| n = f->o_height & 0xFFF; |
| n <<= 16; |
| n |= f->o_width & 0xFFF; |
| w(n, DST_LEFT_TOP_REG); |
| |
| n = f->bottom & 0xFFF; |
| n <<= 16; |
| n |= f->right & 0xFFF; |
| w(n, DST_RIGHT_BOTTOM_REG); |
| |
| w(f->fmt->hw, DST_COLOR_MODE_REG); |
| } |
| |
| void g2d_set_dst_addr(struct g2d_dev *d, dma_addr_t a) |
| { |
| w(a, DST_BASE_ADDR_REG); |
| } |
| |
| void g2d_set_rop4(struct g2d_dev *d, u32 r) |
| { |
| w(r, ROP4_REG); |
| } |
| |
| u32 g2d_cmd_stretch(u32 e) |
| { |
| e &= 1; |
| return e << 4; |
| } |
| |
| void g2d_set_cmd(struct g2d_dev *d, u32 c) |
| { |
| w(c, BITBLT_COMMAND_REG); |
| } |
| |
| void g2d_start(struct g2d_dev *d) |
| { |
| /* Clear cache */ |
| w(0x7, CACHECTL_REG); |
| /* Enable interrupt */ |
| w(1, INTEN_REG); |
| /* Start G2D engine */ |
| w(1, BITBLT_START_REG); |
| } |
| |
| void g2d_clear_int(struct g2d_dev *d) |
| { |
| w(1, INTC_PEND_REG); |
| } |