| /* radiotrack (radioreveal) driver for Linux radio support |
| * (c) 1997 M. Kirkwood |
| * Converted to V4L2 API by Mauro Carvalho Chehab <mchehab@infradead.org> |
| * Converted to new API by Alan Cox <alan@lxorguk.ukuu.org.uk> |
| * Various bugfixes and enhancements by Russell Kroll <rkroll@exploits.org> |
| * |
| * History: |
| * 1999-02-24 Russell Kroll <rkroll@exploits.org> |
| * Fine tuning/VIDEO_TUNER_LOW |
| * Frequency range expanded to start at 87 MHz |
| * |
| * TODO: Allow for more than one of these foolish entities :-) |
| * |
| * Notes on the hardware (reverse engineered from other peoples' |
| * reverse engineering of AIMS' code :-) |
| * |
| * Frequency control is done digitally -- ie out(port,encodefreq(95.8)); |
| * |
| * The signal strength query is unsurprisingly inaccurate. And it seems |
| * to indicate that (on my card, at least) the frequency setting isn't |
| * too great. (I have to tune up .025MHz from what the freq should be |
| * to get a report that the thing is tuned.) |
| * |
| * Volume control is (ugh) analogue: |
| * out(port, start_increasing_volume); |
| * wait(a_wee_while); |
| * out(port, stop_changing_the_volume); |
| * |
| */ |
| |
| #include <linux/module.h> /* Modules */ |
| #include <linux/init.h> /* Initdata */ |
| #include <linux/ioport.h> /* request_region */ |
| #include <linux/delay.h> /* msleep */ |
| #include <linux/videodev2.h> /* kernel radio structs */ |
| #include <linux/version.h> /* for KERNEL_VERSION MACRO */ |
| #include <linux/io.h> /* outb, outb_p */ |
| #include <media/v4l2-device.h> |
| #include <media/v4l2-ioctl.h> |
| |
| MODULE_AUTHOR("M.Kirkwood"); |
| MODULE_DESCRIPTION("A driver for the RadioTrack/RadioReveal radio card."); |
| MODULE_LICENSE("GPL"); |
| |
| #ifndef CONFIG_RADIO_RTRACK_PORT |
| #define CONFIG_RADIO_RTRACK_PORT -1 |
| #endif |
| |
| static int io = CONFIG_RADIO_RTRACK_PORT; |
| static int radio_nr = -1; |
| |
| module_param(io, int, 0); |
| MODULE_PARM_DESC(io, "I/O address of the RadioTrack card (0x20f or 0x30f)"); |
| module_param(radio_nr, int, 0); |
| |
| #define RADIO_VERSION KERNEL_VERSION(0, 0, 2) |
| |
| struct rtrack |
| { |
| struct v4l2_device v4l2_dev; |
| struct video_device vdev; |
| int port; |
| int curvol; |
| unsigned long curfreq; |
| int muted; |
| int io; |
| struct mutex lock; |
| }; |
| |
| static struct rtrack rtrack_card; |
| |
| /* local things */ |
| |
| static void rt_decvol(struct rtrack *rt) |
| { |
| outb(0x58, rt->io); /* volume down + sigstr + on */ |
| msleep(100); |
| outb(0xd8, rt->io); /* volume steady + sigstr + on */ |
| } |
| |
| static void rt_incvol(struct rtrack *rt) |
| { |
| outb(0x98, rt->io); /* volume up + sigstr + on */ |
| msleep(100); |
| outb(0xd8, rt->io); /* volume steady + sigstr + on */ |
| } |
| |
| static void rt_mute(struct rtrack *rt) |
| { |
| rt->muted = 1; |
| mutex_lock(&rt->lock); |
| outb(0xd0, rt->io); /* volume steady, off */ |
| mutex_unlock(&rt->lock); |
| } |
| |
| static int rt_setvol(struct rtrack *rt, int vol) |
| { |
| int i; |
| |
| mutex_lock(&rt->lock); |
| |
| if (vol == rt->curvol) { /* requested volume = current */ |
| if (rt->muted) { /* user is unmuting the card */ |
| rt->muted = 0; |
| outb(0xd8, rt->io); /* enable card */ |
| } |
| mutex_unlock(&rt->lock); |
| return 0; |
| } |
| |
| if (vol == 0) { /* volume = 0 means mute the card */ |
| outb(0x48, rt->io); /* volume down but still "on" */ |
| msleep(2000); /* make sure it's totally down */ |
| outb(0xd0, rt->io); /* volume steady, off */ |
| rt->curvol = 0; /* track the volume state! */ |
| mutex_unlock(&rt->lock); |
| return 0; |
| } |
| |
| rt->muted = 0; |
| if (vol > rt->curvol) |
| for (i = rt->curvol; i < vol; i++) |
| rt_incvol(rt); |
| else |
| for (i = rt->curvol; i > vol; i--) |
| rt_decvol(rt); |
| |
| rt->curvol = vol; |
| mutex_unlock(&rt->lock); |
| return 0; |
| } |
| |
| /* the 128+64 on these outb's is to keep the volume stable while tuning |
| * without them, the volume _will_ creep up with each frequency change |
| * and bit 4 (+16) is to keep the signal strength meter enabled |
| */ |
| |
| static void send_0_byte(struct rtrack *rt) |
| { |
| if (rt->curvol == 0 || rt->muted) { |
| outb_p(128+64+16+ 1, rt->io); /* wr-enable + data low */ |
| outb_p(128+64+16+2+1, rt->io); /* clock */ |
| } |
| else { |
| outb_p(128+64+16+8+ 1, rt->io); /* on + wr-enable + data low */ |
| outb_p(128+64+16+8+2+1, rt->io); /* clock */ |
| } |
| msleep(1); |
| } |
| |
| static void send_1_byte(struct rtrack *rt) |
| { |
| if (rt->curvol == 0 || rt->muted) { |
| outb_p(128+64+16+4 +1, rt->io); /* wr-enable+data high */ |
| outb_p(128+64+16+4+2+1, rt->io); /* clock */ |
| } |
| else { |
| outb_p(128+64+16+8+4 +1, rt->io); /* on+wr-enable+data high */ |
| outb_p(128+64+16+8+4+2+1, rt->io); /* clock */ |
| } |
| |
| msleep(1); |
| } |
| |
| static int rt_setfreq(struct rtrack *rt, unsigned long freq) |
| { |
| int i; |
| |
| mutex_lock(&rt->lock); /* Stop other ops interfering */ |
| |
| rt->curfreq = freq; |
| |
| /* now uses VIDEO_TUNER_LOW for fine tuning */ |
| |
| freq += 171200; /* Add 10.7 MHz IF */ |
| freq /= 800; /* Convert to 50 kHz units */ |
| |
| send_0_byte(rt); /* 0: LSB of frequency */ |
| |
| for (i = 0; i < 13; i++) /* : frequency bits (1-13) */ |
| if (freq & (1 << i)) |
| send_1_byte(rt); |
| else |
| send_0_byte(rt); |
| |
| send_0_byte(rt); /* 14: test bit - always 0 */ |
| send_0_byte(rt); /* 15: test bit - always 0 */ |
| |
| send_0_byte(rt); /* 16: band data 0 - always 0 */ |
| send_0_byte(rt); /* 17: band data 1 - always 0 */ |
| send_0_byte(rt); /* 18: band data 2 - always 0 */ |
| send_0_byte(rt); /* 19: time base - always 0 */ |
| |
| send_0_byte(rt); /* 20: spacing (0 = 25 kHz) */ |
| send_1_byte(rt); /* 21: spacing (1 = 25 kHz) */ |
| send_0_byte(rt); /* 22: spacing (0 = 25 kHz) */ |
| send_1_byte(rt); /* 23: AM/FM (FM = 1, always) */ |
| |
| if (rt->curvol == 0 || rt->muted) |
| outb(0xd0, rt->io); /* volume steady + sigstr */ |
| else |
| outb(0xd8, rt->io); /* volume steady + sigstr + on */ |
| |
| mutex_unlock(&rt->lock); |
| |
| return 0; |
| } |
| |
| static int rt_getsigstr(struct rtrack *rt) |
| { |
| int sig = 1; |
| |
| mutex_lock(&rt->lock); |
| if (inb(rt->io) & 2) /* bit set = no signal present */ |
| sig = 0; |
| mutex_unlock(&rt->lock); |
| return sig; |
| } |
| |
| static int vidioc_querycap(struct file *file, void *priv, |
| struct v4l2_capability *v) |
| { |
| strlcpy(v->driver, "radio-aimslab", sizeof(v->driver)); |
| strlcpy(v->card, "RadioTrack", sizeof(v->card)); |
| strlcpy(v->bus_info, "ISA", sizeof(v->bus_info)); |
| v->version = RADIO_VERSION; |
| v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO; |
| return 0; |
| } |
| |
| static int vidioc_g_tuner(struct file *file, void *priv, |
| struct v4l2_tuner *v) |
| { |
| struct rtrack *rt = video_drvdata(file); |
| |
| if (v->index > 0) |
| return -EINVAL; |
| |
| strlcpy(v->name, "FM", sizeof(v->name)); |
| v->type = V4L2_TUNER_RADIO; |
| v->rangelow = 87 * 16000; |
| v->rangehigh = 108 * 16000; |
| v->rxsubchans = V4L2_TUNER_SUB_MONO; |
| v->capability = V4L2_TUNER_CAP_LOW; |
| v->audmode = V4L2_TUNER_MODE_MONO; |
| v->signal = 0xffff * rt_getsigstr(rt); |
| return 0; |
| } |
| |
| static int vidioc_s_tuner(struct file *file, void *priv, |
| struct v4l2_tuner *v) |
| { |
| return v->index ? -EINVAL : 0; |
| } |
| |
| static int vidioc_s_frequency(struct file *file, void *priv, |
| struct v4l2_frequency *f) |
| { |
| struct rtrack *rt = video_drvdata(file); |
| |
| if (f->tuner != 0 || f->type != V4L2_TUNER_RADIO) |
| return -EINVAL; |
| rt_setfreq(rt, f->frequency); |
| return 0; |
| } |
| |
| static int vidioc_g_frequency(struct file *file, void *priv, |
| struct v4l2_frequency *f) |
| { |
| struct rtrack *rt = video_drvdata(file); |
| |
| if (f->tuner != 0) |
| return -EINVAL; |
| f->type = V4L2_TUNER_RADIO; |
| f->frequency = rt->curfreq; |
| return 0; |
| } |
| |
| static int vidioc_queryctrl(struct file *file, void *priv, |
| struct v4l2_queryctrl *qc) |
| { |
| switch (qc->id) { |
| case V4L2_CID_AUDIO_MUTE: |
| return v4l2_ctrl_query_fill(qc, 0, 1, 1, 1); |
| case V4L2_CID_AUDIO_VOLUME: |
| return v4l2_ctrl_query_fill(qc, 0, 0xff, 1, 0xff); |
| } |
| return -EINVAL; |
| } |
| |
| static int vidioc_g_ctrl(struct file *file, void *priv, |
| struct v4l2_control *ctrl) |
| { |
| struct rtrack *rt = video_drvdata(file); |
| |
| switch (ctrl->id) { |
| case V4L2_CID_AUDIO_MUTE: |
| ctrl->value = rt->muted; |
| return 0; |
| case V4L2_CID_AUDIO_VOLUME: |
| ctrl->value = rt->curvol; |
| return 0; |
| } |
| return -EINVAL; |
| } |
| |
| static int vidioc_s_ctrl(struct file *file, void *priv, |
| struct v4l2_control *ctrl) |
| { |
| struct rtrack *rt = video_drvdata(file); |
| |
| switch (ctrl->id) { |
| case V4L2_CID_AUDIO_MUTE: |
| if (ctrl->value) |
| rt_mute(rt); |
| else |
| rt_setvol(rt, rt->curvol); |
| return 0; |
| case V4L2_CID_AUDIO_VOLUME: |
| rt_setvol(rt, ctrl->value); |
| return 0; |
| } |
| return -EINVAL; |
| } |
| |
| static int vidioc_g_input(struct file *filp, void *priv, unsigned int *i) |
| { |
| *i = 0; |
| return 0; |
| } |
| |
| static int vidioc_s_input(struct file *filp, void *priv, unsigned int i) |
| { |
| return i ? -EINVAL : 0; |
| } |
| |
| static int vidioc_g_audio(struct file *file, void *priv, |
| struct v4l2_audio *a) |
| { |
| a->index = 0; |
| strlcpy(a->name, "Radio", sizeof(a->name)); |
| a->capability = V4L2_AUDCAP_STEREO; |
| return 0; |
| } |
| |
| static int vidioc_s_audio(struct file *file, void *priv, |
| struct v4l2_audio *a) |
| { |
| return a->index ? -EINVAL : 0; |
| } |
| |
| static const struct v4l2_file_operations rtrack_fops = { |
| .owner = THIS_MODULE, |
| .ioctl = video_ioctl2, |
| }; |
| |
| static const struct v4l2_ioctl_ops rtrack_ioctl_ops = { |
| .vidioc_querycap = vidioc_querycap, |
| .vidioc_g_tuner = vidioc_g_tuner, |
| .vidioc_s_tuner = vidioc_s_tuner, |
| .vidioc_g_audio = vidioc_g_audio, |
| .vidioc_s_audio = vidioc_s_audio, |
| .vidioc_g_input = vidioc_g_input, |
| .vidioc_s_input = vidioc_s_input, |
| .vidioc_g_frequency = vidioc_g_frequency, |
| .vidioc_s_frequency = vidioc_s_frequency, |
| .vidioc_queryctrl = vidioc_queryctrl, |
| .vidioc_g_ctrl = vidioc_g_ctrl, |
| .vidioc_s_ctrl = vidioc_s_ctrl, |
| }; |
| |
| static int __init rtrack_init(void) |
| { |
| struct rtrack *rt = &rtrack_card; |
| struct v4l2_device *v4l2_dev = &rt->v4l2_dev; |
| int res; |
| |
| strlcpy(v4l2_dev->name, "rtrack", sizeof(v4l2_dev->name)); |
| rt->io = io; |
| |
| if (rt->io == -1) { |
| v4l2_err(v4l2_dev, "you must set an I/O address with io=0x20f or 0x30f\n"); |
| return -EINVAL; |
| } |
| |
| if (!request_region(rt->io, 2, "rtrack")) { |
| v4l2_err(v4l2_dev, "port 0x%x already in use\n", rt->io); |
| return -EBUSY; |
| } |
| |
| res = v4l2_device_register(NULL, v4l2_dev); |
| if (res < 0) { |
| release_region(rt->io, 2); |
| v4l2_err(v4l2_dev, "could not register v4l2_device\n"); |
| return res; |
| } |
| |
| strlcpy(rt->vdev.name, v4l2_dev->name, sizeof(rt->vdev.name)); |
| rt->vdev.v4l2_dev = v4l2_dev; |
| rt->vdev.fops = &rtrack_fops; |
| rt->vdev.ioctl_ops = &rtrack_ioctl_ops; |
| rt->vdev.release = video_device_release_empty; |
| video_set_drvdata(&rt->vdev, rt); |
| |
| if (video_register_device(&rt->vdev, VFL_TYPE_RADIO, radio_nr) < 0) { |
| v4l2_device_unregister(&rt->v4l2_dev); |
| release_region(rt->io, 2); |
| return -EINVAL; |
| } |
| v4l2_info(v4l2_dev, "AIMSlab RadioTrack/RadioReveal card driver.\n"); |
| |
| /* Set up the I/O locking */ |
| |
| mutex_init(&rt->lock); |
| |
| /* mute card - prevents noisy bootups */ |
| |
| /* this ensures that the volume is all the way down */ |
| outb(0x48, rt->io); /* volume down but still "on" */ |
| msleep(2000); /* make sure it's totally down */ |
| outb(0xc0, rt->io); /* steady volume, mute card */ |
| |
| return 0; |
| } |
| |
| static void __exit rtrack_exit(void) |
| { |
| struct rtrack *rt = &rtrack_card; |
| |
| video_unregister_device(&rt->vdev); |
| v4l2_device_unregister(&rt->v4l2_dev); |
| release_region(rt->io, 2); |
| } |
| |
| module_init(rtrack_init); |
| module_exit(rtrack_exit); |
| |