blob: c5b5212cc3f91544f42b27f73323f9cf0a9bfc42 [file] [log] [blame] [edit]
/*
* linux/arch/m68k/amiga/amiints.c -- Amiga Linux interrupt handling code
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive
* for more details.
*
* 11/07/96: rewritten interrupt handling, irq lists are exists now only for
* this sources where it makes sense (VERTB/PORTS/EXTER) and you must
* be careful that dev_id for this sources is unique since this the
* only possibility to distinguish between different handlers for
* free_irq. irq lists also have different irq flags:
* - IRQ_FLG_FAST: handler is inserted at top of list (after other
* fast handlers)
* - IRQ_FLG_SLOW: handler is inserted at bottom of list and before
* they're executed irq level is set to the previous
* one, but handlers don't need to be reentrant, if
* reentrance occurred, slow handlers will be just
* called again.
* The whole interrupt handling for CIAs is moved to cia.c
* /Roman Zippel
*
* 07/08/99: rewamp of the interrupt handling - we now have two types of
* interrupts, normal and fast handlers, fast handlers being
* marked with IRQF_DISABLED and runs with all other interrupts
* disabled. Normal interrupts disable their own source but
* run with all other interrupt sources enabled.
* PORTS and EXTER interrupts are always shared even if the
* drivers do not explicitly mark this when calling
* request_irq which they really should do.
* This is similar to the way interrupts are handled on all
* other architectures and makes a ton of sense besides
* having the advantage of making it easier to share
* drivers.
* /Jes
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/errno.h>
#include <asm/irq.h>
#include <asm/traps.h>
#include <asm/amigahw.h>
#include <asm/amigaints.h>
#include <asm/amipcmcia.h>
static void amiga_enable_irq(unsigned int irq);
static void amiga_disable_irq(unsigned int irq);
static irqreturn_t ami_int1(int irq, void *dev_id);
static irqreturn_t ami_int3(int irq, void *dev_id);
static irqreturn_t ami_int4(int irq, void *dev_id);
static irqreturn_t ami_int5(int irq, void *dev_id);
static struct irq_controller amiga_irq_controller = {
.name = "amiga",
.lock = __SPIN_LOCK_UNLOCKED(amiga_irq_controller.lock),
.enable = amiga_enable_irq,
.disable = amiga_disable_irq,
};
/*
* void amiga_init_IRQ(void)
*
* Parameters: None
*
* Returns: Nothing
*
* This function should be called during kernel startup to initialize
* the amiga IRQ handling routines.
*/
void __init amiga_init_IRQ(void)
{
if (request_irq(IRQ_AUTO_1, ami_int1, 0, "int1", NULL))
pr_err("Couldn't register int%d\n", 1);
if (request_irq(IRQ_AUTO_3, ami_int3, 0, "int3", NULL))
pr_err("Couldn't register int%d\n", 3);
if (request_irq(IRQ_AUTO_4, ami_int4, 0, "int4", NULL))
pr_err("Couldn't register int%d\n", 4);
if (request_irq(IRQ_AUTO_5, ami_int5, 0, "int5", NULL))
pr_err("Couldn't register int%d\n", 5);
m68k_setup_irq_controller(&amiga_irq_controller, IRQ_USER, AMI_STD_IRQS);
/* turn off PCMCIA interrupts */
if (AMIGAHW_PRESENT(PCMCIA))
gayle.inten = GAYLE_IRQ_IDE;
/* turn off all interrupts and enable the master interrupt bit */
amiga_custom.intena = 0x7fff;
amiga_custom.intreq = 0x7fff;
amiga_custom.intena = IF_SETCLR | IF_INTEN;
cia_init_IRQ(&ciaa_base);
cia_init_IRQ(&ciab_base);
}
/*
* Enable/disable a particular machine specific interrupt source.
* Note that this may affect other interrupts in case of a shared interrupt.
* This function should only be called for a _very_ short time to change some
* internal data, that may not be changed by the interrupt at the same time.
*/
static void amiga_enable_irq(unsigned int irq)
{
amiga_custom.intena = IF_SETCLR | (1 << (irq - IRQ_USER));
}
static void amiga_disable_irq(unsigned int irq)
{
amiga_custom.intena = 1 << (irq - IRQ_USER);
}
/*
* The builtin Amiga hardware interrupt handlers.
*/
static irqreturn_t ami_int1(int irq, void *dev_id)
{
unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar;
/* if serial transmit buffer empty, interrupt */
if (ints & IF_TBE) {
amiga_custom.intreq = IF_TBE;
m68k_handle_int(IRQ_AMIGA_TBE);
}
/* if floppy disk transfer complete, interrupt */
if (ints & IF_DSKBLK) {
amiga_custom.intreq = IF_DSKBLK;
m68k_handle_int(IRQ_AMIGA_DSKBLK);
}
/* if software interrupt set, interrupt */
if (ints & IF_SOFT) {
amiga_custom.intreq = IF_SOFT;
m68k_handle_int(IRQ_AMIGA_SOFT);
}
return IRQ_HANDLED;
}
static irqreturn_t ami_int3(int irq, void *dev_id)
{
unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar;
/* if a blitter interrupt */
if (ints & IF_BLIT) {
amiga_custom.intreq = IF_BLIT;
m68k_handle_int(IRQ_AMIGA_BLIT);
}
/* if a copper interrupt */
if (ints & IF_COPER) {
amiga_custom.intreq = IF_COPER;
m68k_handle_int(IRQ_AMIGA_COPPER);
}
/* if a vertical blank interrupt */
if (ints & IF_VERTB) {
amiga_custom.intreq = IF_VERTB;
m68k_handle_int(IRQ_AMIGA_VERTB);
}
return IRQ_HANDLED;
}
static irqreturn_t ami_int4(int irq, void *dev_id)
{
unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar;
/* if audio 0 interrupt */
if (ints & IF_AUD0) {
amiga_custom.intreq = IF_AUD0;
m68k_handle_int(IRQ_AMIGA_AUD0);
}
/* if audio 1 interrupt */
if (ints & IF_AUD1) {
amiga_custom.intreq = IF_AUD1;
m68k_handle_int(IRQ_AMIGA_AUD1);
}
/* if audio 2 interrupt */
if (ints & IF_AUD2) {
amiga_custom.intreq = IF_AUD2;
m68k_handle_int(IRQ_AMIGA_AUD2);
}
/* if audio 3 interrupt */
if (ints & IF_AUD3) {
amiga_custom.intreq = IF_AUD3;
m68k_handle_int(IRQ_AMIGA_AUD3);
}
return IRQ_HANDLED;
}
static irqreturn_t ami_int5(int irq, void *dev_id)
{
unsigned short ints = amiga_custom.intreqr & amiga_custom.intenar;
/* if serial receive buffer full interrupt */
if (ints & IF_RBF) {
/* acknowledge of IF_RBF must be done by the serial interrupt */
m68k_handle_int(IRQ_AMIGA_RBF);
}
/* if a disk sync interrupt */
if (ints & IF_DSKSYN) {
amiga_custom.intreq = IF_DSKSYN;
m68k_handle_int(IRQ_AMIGA_DSKSYN);
}
return IRQ_HANDLED;
}