| /****************************************************************************** |
| |
| Copyright(c) 2003 - 2004 Intel Corporation. All rights reserved. |
| |
| This program is free software; you can redistribute it and/or modify it |
| under the terms of version 2 of the GNU General Public License as |
| published by the Free Software Foundation. |
| |
| This program is distributed in the hope that it will be useful, but WITHOUT |
| ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| more details. |
| |
| You should have received a copy of the GNU General Public License along with |
| this program; if not, write to the Free Software Foundation, Inc., 59 |
| Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| |
| The full GNU General Public License is included in this distribution in the |
| file called LICENSE. |
| |
| Contact Information: |
| James P. Ketrenos <ipw2100-admin@linux.intel.com> |
| Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 |
| |
| ****************************************************************************** |
| |
| Few modifications for Realtek's Wi-Fi drivers by |
| Andrea Merello <andreamrl@tiscali.it> |
| |
| A special thanks goes to Realtek for their support ! |
| |
| ******************************************************************************/ |
| |
| #include <linux/compiler.h> |
| //#include <linux/config.h> |
| #include <linux/errno.h> |
| #include <linux/if_arp.h> |
| #include <linux/in6.h> |
| #include <linux/in.h> |
| #include <linux/ip.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/netdevice.h> |
| #include <linux/pci.h> |
| #include <linux/proc_fs.h> |
| #include <linux/skbuff.h> |
| #include <linux/slab.h> |
| #include <linux/tcp.h> |
| #include <linux/types.h> |
| #include <linux/wireless.h> |
| #include <linux/etherdevice.h> |
| #include <asm/uaccess.h> |
| #include <linux/if_vlan.h> |
| |
| #include "ieee80211.h" |
| |
| |
| /* |
| |
| |
| 802.11 Data Frame |
| |
| |
| 802.11 frame_contorl for data frames - 2 bytes |
| ,-----------------------------------------------------------------------------------------. |
| bits | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | a | b | c | d | e | |
| |----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|------| |
| val | 0 | 0 | 0 | 1 | x | 0 | 0 | 0 | 1 | 0 | x | x | x | x | x | |
| |----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|------| |
| desc | ^-ver-^ | ^type-^ | ^-----subtype-----^ | to |from |more |retry| pwr |more |wep | |
| | | | x=0 data,x=1 data+ack | DS | DS |frag | | mgm |data | | |
| '-----------------------------------------------------------------------------------------' |
| /\ |
| | |
| 802.11 Data Frame | |
| ,--------- 'ctrl' expands to >-----------' |
| | |
| ,--'---,-------------------------------------------------------------. |
| Bytes | 2 | 2 | 6 | 6 | 6 | 2 | 0..2312 | 4 | |
| |------|------|---------|---------|---------|------|---------|------| |
| Desc. | ctrl | dura | DA/RA | TA | SA | Sequ | Frame | fcs | |
| | | tion | (BSSID) | | | ence | data | | |
| `--------------------------------------------------| |------' |
| Total: 28 non-data bytes `----.----' |
| | |
| .- 'Frame data' expands to <---------------------------' |
| | |
| V |
| ,---------------------------------------------------. |
| Bytes | 1 | 1 | 1 | 3 | 2 | 0-2304 | |
| |------|------|---------|----------|------|---------| |
| Desc. | SNAP | SNAP | Control |Eth Tunnel| Type | IP | |
| | DSAP | SSAP | | | | Packet | |
| | 0xAA | 0xAA |0x03 (UI)|0x00-00-F8| | | |
| `-----------------------------------------| | |
| Total: 8 non-data bytes `----.----' |
| | |
| .- 'IP Packet' expands, if WEP enabled, to <--' |
| | |
| V |
| ,-----------------------. |
| Bytes | 4 | 0-2296 | 4 | |
| |-----|-----------|-----| |
| Desc. | IV | Encrypted | ICV | |
| | | IP Packet | | |
| `-----------------------' |
| Total: 8 non-data bytes |
| |
| |
| 802.3 Ethernet Data Frame |
| |
| ,-----------------------------------------. |
| Bytes | 6 | 6 | 2 | Variable | 4 | |
| |-------|-------|------|-----------|------| |
| Desc. | Dest. | Source| Type | IP Packet | fcs | |
| | MAC | MAC | | | | |
| `-----------------------------------------' |
| Total: 18 non-data bytes |
| |
| In the event that fragmentation is required, the incoming payload is split into |
| N parts of size ieee->fts. The first fragment contains the SNAP header and the |
| remaining packets are just data. |
| |
| If encryption is enabled, each fragment payload size is reduced by enough space |
| to add the prefix and postfix (IV and ICV totalling 8 bytes in the case of WEP) |
| So if you have 1500 bytes of payload with ieee->fts set to 500 without |
| encryption it will take 3 frames. With WEP it will take 4 frames as the |
| payload of each frame is reduced to 492 bytes. |
| |
| * SKB visualization |
| * |
| * ,- skb->data |
| * | |
| * | ETHERNET HEADER ,-<-- PAYLOAD |
| * | | 14 bytes from skb->data |
| * | 2 bytes for Type --> ,T. | (sizeof ethhdr) |
| * | | | | |
| * |,-Dest.--. ,--Src.---. | | | |
| * | 6 bytes| | 6 bytes | | | | |
| * v | | | | | | |
| * 0 | v 1 | v | v 2 |
| * 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 |
| * ^ | ^ | ^ | |
| * | | | | | | |
| * | | | | `T' <---- 2 bytes for Type |
| * | | | | |
| * | | '---SNAP--' <-------- 6 bytes for SNAP |
| * | | |
| * `-IV--' <-------------------- 4 bytes for IV (WEP) |
| * |
| * SNAP HEADER |
| * |
| */ |
| |
| static u8 P802_1H_OUI[P80211_OUI_LEN] = { 0x00, 0x00, 0xf8 }; |
| static u8 RFC1042_OUI[P80211_OUI_LEN] = { 0x00, 0x00, 0x00 }; |
| |
| static inline int ieee80211_put_snap(u8 *data, u16 h_proto) |
| { |
| struct ieee80211_snap_hdr *snap; |
| u8 *oui; |
| |
| snap = (struct ieee80211_snap_hdr *)data; |
| snap->dsap = 0xaa; |
| snap->ssap = 0xaa; |
| snap->ctrl = 0x03; |
| |
| if (h_proto == 0x8137 || h_proto == 0x80f3) |
| oui = P802_1H_OUI; |
| else |
| oui = RFC1042_OUI; |
| snap->oui[0] = oui[0]; |
| snap->oui[1] = oui[1]; |
| snap->oui[2] = oui[2]; |
| |
| *(u16 *)(data + SNAP_SIZE) = htons(h_proto); |
| |
| return SNAP_SIZE + sizeof(u16); |
| } |
| |
| int ieee80211_encrypt_fragment( |
| struct ieee80211_device *ieee, |
| struct sk_buff *frag, |
| int hdr_len) |
| { |
| struct ieee80211_crypt_data* crypt = ieee->crypt[ieee->tx_keyidx]; |
| int res; |
| |
| if (!(crypt && crypt->ops)) |
| { |
| printk("=========>%s(), crypt is null\n", __FUNCTION__); |
| return -1; |
| } |
| #ifdef CONFIG_IEEE80211_CRYPT_TKIP |
| struct ieee80211_hdr *header; |
| |
| if (ieee->tkip_countermeasures && |
| crypt && crypt->ops && strcmp(crypt->ops->name, "TKIP") == 0) { |
| header = (struct ieee80211_hdr *) frag->data; |
| if (net_ratelimit()) { |
| printk(KERN_DEBUG "%s: TKIP countermeasures: dropped " |
| "TX packet to %pM\n", |
| ieee->dev->name, header->addr1); |
| } |
| return -1; |
| } |
| #endif |
| /* To encrypt, frame format is: |
| * IV (4 bytes), clear payload (including SNAP), ICV (4 bytes) */ |
| |
| // PR: FIXME: Copied from hostap. Check fragmentation/MSDU/MPDU encryption. |
| /* Host-based IEEE 802.11 fragmentation for TX is not yet supported, so |
| * call both MSDU and MPDU encryption functions from here. */ |
| atomic_inc(&crypt->refcnt); |
| res = 0; |
| if (crypt->ops->encrypt_msdu) |
| res = crypt->ops->encrypt_msdu(frag, hdr_len, crypt->priv); |
| if (res == 0 && crypt->ops->encrypt_mpdu) |
| res = crypt->ops->encrypt_mpdu(frag, hdr_len, crypt->priv); |
| |
| atomic_dec(&crypt->refcnt); |
| if (res < 0) { |
| printk(KERN_INFO "%s: Encryption failed: len=%d.\n", |
| ieee->dev->name, frag->len); |
| ieee->ieee_stats.tx_discards++; |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| |
| void ieee80211_txb_free(struct ieee80211_txb *txb) { |
| //int i; |
| if (unlikely(!txb)) |
| return; |
| kfree(txb); |
| } |
| |
| struct ieee80211_txb *ieee80211_alloc_txb(int nr_frags, int txb_size, |
| int gfp_mask) |
| { |
| struct ieee80211_txb *txb; |
| int i; |
| txb = kmalloc( |
| sizeof(struct ieee80211_txb) + (sizeof(u8*) * nr_frags), |
| gfp_mask); |
| if (!txb) |
| return NULL; |
| |
| memset(txb, 0, sizeof(struct ieee80211_txb)); |
| txb->nr_frags = nr_frags; |
| txb->frag_size = txb_size; |
| |
| for (i = 0; i < nr_frags; i++) { |
| txb->fragments[i] = dev_alloc_skb(txb_size); |
| if (unlikely(!txb->fragments[i])) { |
| i--; |
| break; |
| } |
| memset(txb->fragments[i]->cb, 0, sizeof(txb->fragments[i]->cb)); |
| } |
| if (unlikely(i != nr_frags)) { |
| while (i >= 0) |
| dev_kfree_skb_any(txb->fragments[i--]); |
| kfree(txb); |
| return NULL; |
| } |
| return txb; |
| } |
| |
| // Classify the to-be send data packet |
| // Need to acquire the sent queue index. |
| static int |
| ieee80211_classify(struct sk_buff *skb, struct ieee80211_network *network) |
| { |
| struct ethhdr *eth; |
| struct iphdr *ip; |
| eth = (struct ethhdr *)skb->data; |
| if (eth->h_proto != htons(ETH_P_IP)) |
| return 0; |
| |
| // IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA, skb->data, skb->len); |
| ip = ip_hdr(skb); |
| switch (ip->tos & 0xfc) { |
| case 0x20: |
| return 2; |
| case 0x40: |
| return 1; |
| case 0x60: |
| return 3; |
| case 0x80: |
| return 4; |
| case 0xa0: |
| return 5; |
| case 0xc0: |
| return 6; |
| case 0xe0: |
| return 7; |
| default: |
| return 0; |
| } |
| } |
| |
| #define SN_LESS(a, b) (((a-b)&0x800)!=0) |
| void ieee80211_tx_query_agg_cap(struct ieee80211_device* ieee, struct sk_buff* skb, cb_desc* tcb_desc) |
| { |
| PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo; |
| PTX_TS_RECORD pTxTs = NULL; |
| struct ieee80211_hdr_1addr* hdr = (struct ieee80211_hdr_1addr*)skb->data; |
| |
| if (!pHTInfo->bCurrentHTSupport||!pHTInfo->bEnableHT) |
| return; |
| if (!IsQoSDataFrame(skb->data)) |
| return; |
| |
| if (is_multicast_ether_addr(hdr->addr1) || is_broadcast_ether_addr(hdr->addr1)) |
| return; |
| //check packet and mode later |
| #ifdef TO_DO_LIST |
| if(pTcb->PacketLength >= 4096) |
| return; |
| // For RTL819X, if pairwisekey = wep/tkip, we don't aggrregation. |
| if(!Adapter->HalFunc.GetNmodeSupportBySecCfgHandler(Adapter)) |
| return; |
| #endif |
| if(!ieee->GetNmodeSupportBySecCfg(ieee->dev)) |
| { |
| return; |
| } |
| if(pHTInfo->bCurrentAMPDUEnable) |
| { |
| if (!GetTs(ieee, (PTS_COMMON_INFO*)(&pTxTs), hdr->addr1, skb->priority, TX_DIR, true)) |
| { |
| printk("===>can't get TS\n"); |
| return; |
| } |
| if (pTxTs->TxAdmittedBARecord.bValid == false) |
| { |
| TsStartAddBaProcess(ieee, pTxTs); |
| goto FORCED_AGG_SETTING; |
| } |
| else if (pTxTs->bUsingBa == false) |
| { |
| if (SN_LESS(pTxTs->TxAdmittedBARecord.BaStartSeqCtrl.field.SeqNum, (pTxTs->TxCurSeq+1)%4096)) |
| pTxTs->bUsingBa = true; |
| else |
| goto FORCED_AGG_SETTING; |
| } |
| |
| if (ieee->iw_mode == IW_MODE_INFRA) |
| { |
| tcb_desc->bAMPDUEnable = true; |
| tcb_desc->ampdu_factor = pHTInfo->CurrentAMPDUFactor; |
| tcb_desc->ampdu_density = pHTInfo->CurrentMPDUDensity; |
| } |
| } |
| FORCED_AGG_SETTING: |
| switch(pHTInfo->ForcedAMPDUMode ) |
| { |
| case HT_AGG_AUTO: |
| break; |
| |
| case HT_AGG_FORCE_ENABLE: |
| tcb_desc->bAMPDUEnable = true; |
| tcb_desc->ampdu_density = pHTInfo->ForcedMPDUDensity; |
| tcb_desc->ampdu_factor = pHTInfo->ForcedAMPDUFactor; |
| break; |
| |
| case HT_AGG_FORCE_DISABLE: |
| tcb_desc->bAMPDUEnable = false; |
| tcb_desc->ampdu_density = 0; |
| tcb_desc->ampdu_factor = 0; |
| break; |
| |
| } |
| return; |
| } |
| |
| extern void ieee80211_qurey_ShortPreambleMode(struct ieee80211_device* ieee, cb_desc* tcb_desc) |
| { |
| tcb_desc->bUseShortPreamble = false; |
| if (tcb_desc->data_rate == 2) |
| {//// 1M can only use Long Preamble. 11B spec |
| return; |
| } |
| else if (ieee->current_network.capability & WLAN_CAPABILITY_SHORT_PREAMBLE) |
| { |
| tcb_desc->bUseShortPreamble = true; |
| } |
| return; |
| } |
| extern void |
| ieee80211_query_HTCapShortGI(struct ieee80211_device *ieee, cb_desc *tcb_desc) |
| { |
| PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo; |
| |
| tcb_desc->bUseShortGI = false; |
| |
| if(!pHTInfo->bCurrentHTSupport||!pHTInfo->bEnableHT) |
| return; |
| |
| if(pHTInfo->bForcedShortGI) |
| { |
| tcb_desc->bUseShortGI = true; |
| return; |
| } |
| |
| if((pHTInfo->bCurBW40MHz==true) && pHTInfo->bCurShortGI40MHz) |
| tcb_desc->bUseShortGI = true; |
| else if((pHTInfo->bCurBW40MHz==false) && pHTInfo->bCurShortGI20MHz) |
| tcb_desc->bUseShortGI = true; |
| } |
| |
| void ieee80211_query_BandwidthMode(struct ieee80211_device* ieee, cb_desc *tcb_desc) |
| { |
| PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo; |
| |
| tcb_desc->bPacketBW = false; |
| |
| if(!pHTInfo->bCurrentHTSupport||!pHTInfo->bEnableHT) |
| return; |
| |
| if(tcb_desc->bMulticast || tcb_desc->bBroadcast) |
| return; |
| |
| if((tcb_desc->data_rate & 0x80)==0) // If using legacy rate, it shall use 20MHz channel. |
| return; |
| //BandWidthAutoSwitch is for auto switch to 20 or 40 in long distance |
| if(pHTInfo->bCurBW40MHz && pHTInfo->bCurTxBW40MHz && !ieee->bandwidth_auto_switch.bforced_tx20Mhz) |
| tcb_desc->bPacketBW = true; |
| return; |
| } |
| |
| void ieee80211_query_protectionmode(struct ieee80211_device* ieee, cb_desc* tcb_desc, struct sk_buff* skb) |
| { |
| // Common Settings |
| tcb_desc->bRTSSTBC = false; |
| tcb_desc->bRTSUseShortGI = false; // Since protection frames are always sent by legacy rate, ShortGI will never be used. |
| tcb_desc->bCTSEnable = false; // Most of protection using RTS/CTS |
| tcb_desc->RTSSC = 0; // 20MHz: Don't care; 40MHz: Duplicate. |
| tcb_desc->bRTSBW = false; // RTS frame bandwidth is always 20MHz |
| |
| if(tcb_desc->bBroadcast || tcb_desc->bMulticast)//only unicast frame will use rts/cts |
| return; |
| |
| if (is_broadcast_ether_addr(skb->data+16)) //check addr3 as infrastructure add3 is DA. |
| return; |
| |
| if (ieee->mode < IEEE_N_24G) //b, g mode |
| { |
| // (1) RTS_Threshold is compared to the MPDU, not MSDU. |
| // (2) If there are more than one frag in this MSDU, only the first frag uses protection frame. |
| // Other fragments are protected by previous fragment. |
| // So we only need to check the length of first fragment. |
| if (skb->len > ieee->rts) |
| { |
| tcb_desc->bRTSEnable = true; |
| tcb_desc->rts_rate = MGN_24M; |
| } |
| else if (ieee->current_network.buseprotection) |
| { |
| // Use CTS-to-SELF in protection mode. |
| tcb_desc->bRTSEnable = true; |
| tcb_desc->bCTSEnable = true; |
| tcb_desc->rts_rate = MGN_24M; |
| } |
| //otherwise return; |
| return; |
| } |
| else |
| {// 11n High throughput case. |
| PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo; |
| while (true) |
| { |
| //check ERP protection |
| if (ieee->current_network.buseprotection) |
| {// CTS-to-SELF |
| tcb_desc->bRTSEnable = true; |
| tcb_desc->bCTSEnable = true; |
| tcb_desc->rts_rate = MGN_24M; |
| break; |
| } |
| //check HT op mode |
| if(pHTInfo->bCurrentHTSupport && pHTInfo->bEnableHT) |
| { |
| u8 HTOpMode = pHTInfo->CurrentOpMode; |
| if((pHTInfo->bCurBW40MHz && (HTOpMode == 2 || HTOpMode == 3)) || |
| (!pHTInfo->bCurBW40MHz && HTOpMode == 3) ) |
| { |
| tcb_desc->rts_rate = MGN_24M; // Rate is 24Mbps. |
| tcb_desc->bRTSEnable = true; |
| break; |
| } |
| } |
| //check rts |
| if (skb->len > ieee->rts) |
| { |
| tcb_desc->rts_rate = MGN_24M; // Rate is 24Mbps. |
| tcb_desc->bRTSEnable = true; |
| break; |
| } |
| //to do list: check MIMO power save condition. |
| //check AMPDU aggregation for TXOP |
| if(tcb_desc->bAMPDUEnable) |
| { |
| tcb_desc->rts_rate = MGN_24M; // Rate is 24Mbps. |
| // According to 8190 design, firmware sends CF-End only if RTS/CTS is enabled. However, it degrads |
| // throughput around 10M, so we disable of this mechanism. 2007.08.03 by Emily |
| tcb_desc->bRTSEnable = false; |
| break; |
| } |
| //check IOT action |
| if(pHTInfo->IOTAction & HT_IOT_ACT_FORCED_CTS2SELF) |
| { |
| tcb_desc->bCTSEnable = true; |
| tcb_desc->rts_rate = MGN_24M; |
| tcb_desc->bRTSEnable = true; |
| break; |
| } |
| // Totally no protection case!! |
| goto NO_PROTECTION; |
| } |
| } |
| // For test , CTS replace with RTS |
| if( 0 ) |
| { |
| tcb_desc->bCTSEnable = true; |
| tcb_desc->rts_rate = MGN_24M; |
| tcb_desc->bRTSEnable = true; |
| } |
| if (ieee->current_network.capability & WLAN_CAPABILITY_SHORT_PREAMBLE) |
| tcb_desc->bUseShortPreamble = true; |
| if (ieee->mode == IW_MODE_MASTER) |
| goto NO_PROTECTION; |
| return; |
| NO_PROTECTION: |
| tcb_desc->bRTSEnable = false; |
| tcb_desc->bCTSEnable = false; |
| tcb_desc->rts_rate = 0; |
| tcb_desc->RTSSC = 0; |
| tcb_desc->bRTSBW = false; |
| } |
| |
| |
| void ieee80211_txrate_selectmode(struct ieee80211_device* ieee, cb_desc* tcb_desc) |
| { |
| #ifdef TO_DO_LIST |
| if(!IsDataFrame(pFrame)) |
| { |
| pTcb->bTxDisableRateFallBack = TRUE; |
| pTcb->bTxUseDriverAssingedRate = TRUE; |
| pTcb->RATRIndex = 7; |
| return; |
| } |
| |
| if(pMgntInfo->ForcedDataRate!= 0) |
| { |
| pTcb->bTxDisableRateFallBack = TRUE; |
| pTcb->bTxUseDriverAssingedRate = TRUE; |
| return; |
| } |
| #endif |
| if(ieee->bTxDisableRateFallBack) |
| tcb_desc->bTxDisableRateFallBack = true; |
| |
| if(ieee->bTxUseDriverAssingedRate) |
| tcb_desc->bTxUseDriverAssingedRate = true; |
| if(!tcb_desc->bTxDisableRateFallBack || !tcb_desc->bTxUseDriverAssingedRate) |
| { |
| if (ieee->iw_mode == IW_MODE_INFRA || ieee->iw_mode == IW_MODE_ADHOC) |
| tcb_desc->RATRIndex = 0; |
| } |
| } |
| |
| void ieee80211_query_seqnum(struct ieee80211_device*ieee, struct sk_buff* skb, u8* dst) |
| { |
| if (is_multicast_ether_addr(dst) || is_broadcast_ether_addr(dst)) |
| return; |
| if (IsQoSDataFrame(skb->data)) //we deal qos data only |
| { |
| PTX_TS_RECORD pTS = NULL; |
| if (!GetTs(ieee, (PTS_COMMON_INFO*)(&pTS), dst, skb->priority, TX_DIR, true)) |
| { |
| return; |
| } |
| pTS->TxCurSeq = (pTS->TxCurSeq+1)%4096; |
| } |
| } |
| |
| int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev) |
| { |
| struct ieee80211_device *ieee = netdev_priv(dev); |
| struct ieee80211_txb *txb = NULL; |
| struct ieee80211_hdr_3addrqos *frag_hdr; |
| int i, bytes_per_frag, nr_frags, bytes_last_frag, frag_size; |
| unsigned long flags; |
| struct net_device_stats *stats = &ieee->stats; |
| int ether_type = 0, encrypt; |
| int bytes, fc, qos_ctl = 0, hdr_len; |
| struct sk_buff *skb_frag; |
| struct ieee80211_hdr_3addrqos header = { /* Ensure zero initialized */ |
| .duration_id = 0, |
| .seq_ctl = 0, |
| .qos_ctl = 0 |
| }; |
| u8 dest[ETH_ALEN], src[ETH_ALEN]; |
| int qos_actived = ieee->current_network.qos_data.active; |
| |
| struct ieee80211_crypt_data* crypt; |
| |
| cb_desc *tcb_desc; |
| |
| spin_lock_irqsave(&ieee->lock, flags); |
| |
| /* If there is no driver handler to take the TXB, dont' bother |
| * creating it... */ |
| if ((!ieee->hard_start_xmit && !(ieee->softmac_features & IEEE_SOFTMAC_TX_QUEUE))|| |
| ((!ieee->softmac_data_hard_start_xmit && (ieee->softmac_features & IEEE_SOFTMAC_TX_QUEUE)))) { |
| printk(KERN_WARNING "%s: No xmit handler.\n", |
| ieee->dev->name); |
| goto success; |
| } |
| |
| |
| if(likely(ieee->raw_tx == 0)){ |
| if (unlikely(skb->len < SNAP_SIZE + sizeof(u16))) { |
| printk(KERN_WARNING "%s: skb too small (%d).\n", |
| ieee->dev->name, skb->len); |
| goto success; |
| } |
| |
| memset(skb->cb, 0, sizeof(skb->cb)); |
| ether_type = ntohs(((struct ethhdr *)skb->data)->h_proto); |
| |
| crypt = ieee->crypt[ieee->tx_keyidx]; |
| |
| encrypt = !(ether_type == ETH_P_PAE && ieee->ieee802_1x) && |
| ieee->host_encrypt && crypt && crypt->ops; |
| |
| if (!encrypt && ieee->ieee802_1x && |
| ieee->drop_unencrypted && ether_type != ETH_P_PAE) { |
| stats->tx_dropped++; |
| goto success; |
| } |
| #ifdef CONFIG_IEEE80211_DEBUG |
| if (crypt && !encrypt && ether_type == ETH_P_PAE) { |
| struct eapol *eap = (struct eapol *)(skb->data + |
| sizeof(struct ethhdr) - SNAP_SIZE - sizeof(u16)); |
| IEEE80211_DEBUG_EAP("TX: IEEE 802.11 EAPOL frame: %s\n", |
| eap_get_type(eap->type)); |
| } |
| #endif |
| |
| /* Save source and destination addresses */ |
| memcpy(&dest, skb->data, ETH_ALEN); |
| memcpy(&src, skb->data+ETH_ALEN, ETH_ALEN); |
| |
| /* Advance the SKB to the start of the payload */ |
| skb_pull(skb, sizeof(struct ethhdr)); |
| |
| /* Determine total amount of storage required for TXB packets */ |
| bytes = skb->len + SNAP_SIZE + sizeof(u16); |
| |
| if (encrypt) |
| fc = IEEE80211_FTYPE_DATA | IEEE80211_FCTL_WEP; |
| else |
| |
| fc = IEEE80211_FTYPE_DATA; |
| |
| //if(ieee->current_network.QoS_Enable) |
| if(qos_actived) |
| fc |= IEEE80211_STYPE_QOS_DATA; |
| else |
| fc |= IEEE80211_STYPE_DATA; |
| |
| if (ieee->iw_mode == IW_MODE_INFRA) { |
| fc |= IEEE80211_FCTL_TODS; |
| /* To DS: Addr1 = BSSID, Addr2 = SA, |
| Addr3 = DA */ |
| memcpy(&header.addr1, ieee->current_network.bssid, ETH_ALEN); |
| memcpy(&header.addr2, &src, ETH_ALEN); |
| memcpy(&header.addr3, &dest, ETH_ALEN); |
| } else if (ieee->iw_mode == IW_MODE_ADHOC) { |
| /* not From/To DS: Addr1 = DA, Addr2 = SA, |
| Addr3 = BSSID */ |
| memcpy(&header.addr1, dest, ETH_ALEN); |
| memcpy(&header.addr2, src, ETH_ALEN); |
| memcpy(&header.addr3, ieee->current_network.bssid, ETH_ALEN); |
| } |
| |
| header.frame_ctl = cpu_to_le16(fc); |
| |
| /* Determine fragmentation size based on destination (multicast |
| * and broadcast are not fragmented) */ |
| if (is_multicast_ether_addr(header.addr1) || |
| is_broadcast_ether_addr(header.addr1)) { |
| frag_size = MAX_FRAG_THRESHOLD; |
| qos_ctl |= QOS_CTL_NOTCONTAIN_ACK; |
| } |
| else { |
| frag_size = ieee->fts;//default:392 |
| qos_ctl = 0; |
| } |
| |
| //if (ieee->current_network.QoS_Enable) |
| if(qos_actived) |
| { |
| hdr_len = IEEE80211_3ADDR_LEN + 2; |
| |
| skb->priority = ieee80211_classify(skb, &ieee->current_network); |
| qos_ctl |= skb->priority; //set in the ieee80211_classify |
| header.qos_ctl = cpu_to_le16(qos_ctl & IEEE80211_QOS_TID); |
| } else { |
| hdr_len = IEEE80211_3ADDR_LEN; |
| } |
| /* Determine amount of payload per fragment. Regardless of if |
| * this stack is providing the full 802.11 header, one will |
| * eventually be affixed to this fragment -- so we must account for |
| * it when determining the amount of payload space. */ |
| bytes_per_frag = frag_size - hdr_len; |
| if (ieee->config & |
| (CFG_IEEE80211_COMPUTE_FCS | CFG_IEEE80211_RESERVE_FCS)) |
| bytes_per_frag -= IEEE80211_FCS_LEN; |
| |
| /* Each fragment may need to have room for encryptiong pre/postfix */ |
| if (encrypt) |
| bytes_per_frag -= crypt->ops->extra_prefix_len + |
| crypt->ops->extra_postfix_len; |
| |
| /* Number of fragments is the total bytes_per_frag / |
| * payload_per_fragment */ |
| nr_frags = bytes / bytes_per_frag; |
| bytes_last_frag = bytes % bytes_per_frag; |
| if (bytes_last_frag) |
| nr_frags++; |
| else |
| bytes_last_frag = bytes_per_frag; |
| |
| /* When we allocate the TXB we allocate enough space for the reserve |
| * and full fragment bytes (bytes_per_frag doesn't include prefix, |
| * postfix, header, FCS, etc.) */ |
| txb = ieee80211_alloc_txb(nr_frags, frag_size + ieee->tx_headroom, GFP_ATOMIC); |
| if (unlikely(!txb)) { |
| printk(KERN_WARNING "%s: Could not allocate TXB\n", |
| ieee->dev->name); |
| goto failed; |
| } |
| txb->encrypted = encrypt; |
| txb->payload_size = bytes; |
| |
| //if (ieee->current_network.QoS_Enable) |
| if(qos_actived) |
| { |
| txb->queue_index = UP2AC(skb->priority); |
| } else { |
| txb->queue_index = WME_AC_BK;; |
| } |
| |
| |
| |
| for (i = 0; i < nr_frags; i++) { |
| skb_frag = txb->fragments[i]; |
| tcb_desc = (cb_desc *)(skb_frag->cb + MAX_DEV_ADDR_SIZE); |
| if(qos_actived){ |
| skb_frag->priority = skb->priority;//UP2AC(skb->priority); |
| tcb_desc->queue_index = UP2AC(skb->priority); |
| } else { |
| skb_frag->priority = WME_AC_BK; |
| tcb_desc->queue_index = WME_AC_BK; |
| } |
| skb_reserve(skb_frag, ieee->tx_headroom); |
| |
| if (encrypt){ |
| if (ieee->hwsec_active) |
| tcb_desc->bHwSec = 1; |
| else |
| tcb_desc->bHwSec = 0; |
| skb_reserve(skb_frag, crypt->ops->extra_prefix_len); |
| } |
| else |
| { |
| tcb_desc->bHwSec = 0; |
| } |
| frag_hdr = (struct ieee80211_hdr_3addrqos *)skb_put(skb_frag, hdr_len); |
| memcpy(frag_hdr, &header, hdr_len); |
| |
| /* If this is not the last fragment, then add the MOREFRAGS |
| * bit to the frame control */ |
| if (i != nr_frags - 1) { |
| frag_hdr->frame_ctl = cpu_to_le16( |
| fc | IEEE80211_FCTL_MOREFRAGS); |
| bytes = bytes_per_frag; |
| |
| } else { |
| /* The last fragment takes the remaining length */ |
| bytes = bytes_last_frag; |
| } |
| //if(ieee->current_network.QoS_Enable) |
| if(qos_actived) |
| { |
| // add 1 only indicate to corresponding seq number control 2006/7/12 |
| frag_hdr->seq_ctl = cpu_to_le16(ieee->seq_ctrl[UP2AC(skb->priority)+1]<<4 | i); |
| } else { |
| frag_hdr->seq_ctl = cpu_to_le16(ieee->seq_ctrl[0]<<4 | i); |
| } |
| |
| /* Put a SNAP header on the first fragment */ |
| if (i == 0) { |
| ieee80211_put_snap( |
| skb_put(skb_frag, SNAP_SIZE + sizeof(u16)), |
| ether_type); |
| bytes -= SNAP_SIZE + sizeof(u16); |
| } |
| |
| memcpy(skb_put(skb_frag, bytes), skb->data, bytes); |
| |
| /* Advance the SKB... */ |
| skb_pull(skb, bytes); |
| |
| /* Encryption routine will move the header forward in order |
| * to insert the IV between the header and the payload */ |
| if (encrypt) |
| ieee80211_encrypt_fragment(ieee, skb_frag, hdr_len); |
| if (ieee->config & |
| (CFG_IEEE80211_COMPUTE_FCS | CFG_IEEE80211_RESERVE_FCS)) |
| skb_put(skb_frag, 4); |
| } |
| |
| if(qos_actived) |
| { |
| if (ieee->seq_ctrl[UP2AC(skb->priority) + 1] == 0xFFF) |
| ieee->seq_ctrl[UP2AC(skb->priority) + 1] = 0; |
| else |
| ieee->seq_ctrl[UP2AC(skb->priority) + 1]++; |
| } else { |
| if (ieee->seq_ctrl[0] == 0xFFF) |
| ieee->seq_ctrl[0] = 0; |
| else |
| ieee->seq_ctrl[0]++; |
| } |
| }else{ |
| if (unlikely(skb->len < sizeof(struct ieee80211_hdr_3addr))) { |
| printk(KERN_WARNING "%s: skb too small (%d).\n", |
| ieee->dev->name, skb->len); |
| goto success; |
| } |
| |
| txb = ieee80211_alloc_txb(1, skb->len, GFP_ATOMIC); |
| if(!txb){ |
| printk(KERN_WARNING "%s: Could not allocate TXB\n", |
| ieee->dev->name); |
| goto failed; |
| } |
| |
| txb->encrypted = 0; |
| txb->payload_size = skb->len; |
| memcpy(skb_put(txb->fragments[0],skb->len), skb->data, skb->len); |
| } |
| |
| success: |
| //WB add to fill data tcb_desc here. only first fragment is considered, need to change, and you may remove to other place. |
| if (txb) |
| { |
| cb_desc *tcb_desc = (cb_desc *)(txb->fragments[0]->cb + MAX_DEV_ADDR_SIZE); |
| tcb_desc->bTxEnableFwCalcDur = 1; |
| if (is_multicast_ether_addr(header.addr1)) |
| tcb_desc->bMulticast = 1; |
| if (is_broadcast_ether_addr(header.addr1)) |
| tcb_desc->bBroadcast = 1; |
| ieee80211_txrate_selectmode(ieee, tcb_desc); |
| if ( tcb_desc->bMulticast || tcb_desc->bBroadcast) |
| tcb_desc->data_rate = ieee->basic_rate; |
| else |
| //tcb_desc->data_rate = CURRENT_RATE(ieee->current_network.mode, ieee->rate, ieee->HTCurrentOperaRate); |
| tcb_desc->data_rate = CURRENT_RATE(ieee->mode, ieee->rate, ieee->HTCurrentOperaRate); |
| ieee80211_qurey_ShortPreambleMode(ieee, tcb_desc); |
| ieee80211_tx_query_agg_cap(ieee, txb->fragments[0], tcb_desc); |
| ieee80211_query_HTCapShortGI(ieee, tcb_desc); |
| ieee80211_query_BandwidthMode(ieee, tcb_desc); |
| ieee80211_query_protectionmode(ieee, tcb_desc, txb->fragments[0]); |
| ieee80211_query_seqnum(ieee, txb->fragments[0], header.addr1); |
| // IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA, txb->fragments[0]->data, txb->fragments[0]->len); |
| //IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA, tcb_desc, sizeof(cb_desc)); |
| } |
| spin_unlock_irqrestore(&ieee->lock, flags); |
| dev_kfree_skb_any(skb); |
| if (txb) { |
| if (ieee->softmac_features & IEEE_SOFTMAC_TX_QUEUE){ |
| ieee80211_softmac_xmit(txb, ieee); |
| }else{ |
| if ((*ieee->hard_start_xmit)(txb, dev) == 0) { |
| stats->tx_packets++; |
| stats->tx_bytes += txb->payload_size; |
| return 0; |
| } |
| ieee80211_txb_free(txb); |
| } |
| } |
| |
| return 0; |
| |
| failed: |
| spin_unlock_irqrestore(&ieee->lock, flags); |
| netif_stop_queue(dev); |
| stats->tx_errors++; |
| return 1; |
| |
| } |
| |
| EXPORT_SYMBOL(ieee80211_txb_free); |