| /****************************************************************************** |
| |
| (c) Copyright 2008, RealTEK Technologies Inc. All Rights Reserved. |
| |
| Module: r819xusb_cmdpkt.c (RTL8190 TX/RX command packet handler Source C File) |
| |
| Note: The module is responsible for handling TX and RX command packet. |
| 1. TX : Send set and query configuration command packet. |
| 2. RX : Receive tx feedback, beacon state, query configuration |
| command packet. |
| |
| Function: |
| |
| Export: |
| |
| Abbrev: |
| |
| History: |
| Data Who Remark |
| |
| 05/06/2008 amy Create initial version porting from windows driver. |
| |
| ******************************************************************************/ |
| #include "r8192E.h" |
| #include "r8192E_hw.h" |
| #include "r819xE_cmdpkt.h" |
| /*---------------------------Define Local Constant---------------------------*/ |
| /* Debug constant*/ |
| #define CMPK_DEBOUNCE_CNT 1 |
| /* 2007/10/24 MH Add for printing a range of data. */ |
| #define CMPK_PRINT(Address)\ |
| {\ |
| unsigned char i;\ |
| u32 temp[10];\ |
| \ |
| memcpy(temp, Address, 40);\ |
| for (i = 0; i <40; i+=4)\ |
| printk("\r\n %08x", temp[i]);\ |
| }\ |
| |
| /*---------------------------Define functions---------------------------------*/ |
| /*----------------------------------------------------------------------------- |
| * Function: cmpk_message_handle_tx() |
| * |
| * Overview: Driver internal module can call the API to send message to |
| * firmware side. For example, you can send a debug command packet. |
| * Or you can send a request for FW to modify RLX4181 LBUS HW bank. |
| * Otherwise, you can change MAC/PHT/RF register by firmware at |
| * run time. We do not support message more than one segment now. |
| * |
| * Input: NONE |
| * |
| * Output: NONE |
| * |
| * Return: NONE |
| * |
| * Revised History: |
| * When Who Remark |
| * 05/06/2008 amy porting from windows code. |
| * |
| *---------------------------------------------------------------------------*/ |
| RT_STATUS cmpk_message_handle_tx( |
| struct net_device *dev, |
| u8* code_virtual_address, |
| u32 packettype, |
| u32 buffer_len) |
| { |
| |
| RT_STATUS rt_status = RT_STATUS_SUCCESS; |
| #ifdef RTL8192U |
| return rt_status; |
| #else |
| struct r8192_priv *priv = ieee80211_priv(dev); |
| u16 frag_threshold; |
| u16 frag_length = 0, frag_offset = 0; |
| rt_firmware *pfirmware = priv->pFirmware; |
| struct sk_buff *skb; |
| unsigned char *seg_ptr; |
| cb_desc *tcb_desc; |
| u8 bLastIniPkt; |
| |
| PTX_FWINFO_8190PCI pTxFwInfo = NULL; |
| int i; |
| |
| //spin_lock_irqsave(&priv->tx_lock,flags); |
| RT_TRACE(COMP_CMDPKT,"%s(),buffer_len is %d\n",__FUNCTION__,buffer_len); |
| firmware_init_param(dev); |
| //Fragmentation might be required |
| frag_threshold = pfirmware->cmdpacket_frag_thresold; |
| do { |
| if((buffer_len - frag_offset) > frag_threshold) { |
| frag_length = frag_threshold ; |
| bLastIniPkt = 0; |
| |
| } else { |
| frag_length =(u16)(buffer_len - frag_offset); |
| bLastIniPkt = 1; |
| |
| } |
| |
| /* Allocate skb buffer to contain firmware info and tx descriptor info |
| * add 4 to avoid packet appending overflow. |
| * */ |
| #ifdef RTL8192U |
| skb = dev_alloc_skb(USB_HWDESC_HEADER_LEN + frag_length + 4); |
| #else |
| skb = dev_alloc_skb(frag_length + priv->ieee80211->tx_headroom + 4); |
| #endif |
| if(skb == NULL) { |
| rt_status = RT_STATUS_FAILURE; |
| goto Failed; |
| } |
| |
| memcpy((unsigned char *)(skb->cb),&dev,sizeof(dev)); |
| tcb_desc = (cb_desc*)(skb->cb + MAX_DEV_ADDR_SIZE); |
| tcb_desc->queue_index = TXCMD_QUEUE; |
| tcb_desc->bCmdOrInit = packettype; |
| tcb_desc->bLastIniPkt = bLastIniPkt; |
| tcb_desc->pkt_size = frag_length; |
| |
| #ifdef RTL8192U |
| skb_reserve(skb, USB_HWDESC_HEADER_LEN); |
| #endif |
| |
| //seg_ptr = skb_put(skb, frag_length + priv->ieee80211->tx_headroom); |
| seg_ptr = skb_put(skb, priv->ieee80211->tx_headroom); |
| |
| pTxFwInfo = (PTX_FWINFO_8190PCI)seg_ptr; |
| memset(pTxFwInfo,0,sizeof(TX_FWINFO_8190PCI)); |
| memset(pTxFwInfo,0x12,8); |
| |
| seg_ptr +=sizeof(TX_FWINFO_8190PCI); |
| |
| /* |
| * Transform from little endian to big endian |
| * and pending zero |
| */ |
| seg_ptr = skb_tail_pointer(skb); |
| for(i=0 ; i < frag_length; i+=4) { |
| *seg_ptr++ = ((i+0)<frag_length)?code_virtual_address[i+3]:0; |
| *seg_ptr++ = ((i+1)<frag_length)?code_virtual_address[i+2]:0; |
| *seg_ptr++ = ((i+2)<frag_length)?code_virtual_address[i+1]:0; |
| *seg_ptr++ = ((i+3)<frag_length)?code_virtual_address[i+0]:0; |
| } |
| skb_put(skb, i); |
| priv->ieee80211->softmac_hard_start_xmit(skb,dev); |
| |
| code_virtual_address += frag_length; |
| frag_offset += frag_length; |
| |
| }while(frag_offset < buffer_len); |
| |
| Failed: |
| //spin_unlock_irqrestore(&priv->tx_lock,flags); |
| return rt_status; |
| |
| |
| #endif |
| } /* CMPK_Message_Handle_Tx */ |
| |
| /*----------------------------------------------------------------------------- |
| * Function: cmpk_counttxstatistic() |
| * |
| * Overview: |
| * |
| * Input: PADAPTER pAdapter - . |
| * CMPK_TXFB_T *psTx_FB - . |
| * |
| * Output: NONE |
| * |
| * Return: NONE |
| * |
| * Revised History: |
| * When Who Remark |
| * 05/12/2008 amy Create Version 0 porting from windows code. |
| * |
| *---------------------------------------------------------------------------*/ |
| static void |
| cmpk_count_txstatistic( |
| struct net_device *dev, |
| cmpk_txfb_t *pstx_fb) |
| { |
| struct r8192_priv *priv = ieee80211_priv(dev); |
| #ifdef ENABLE_PS |
| RT_RF_POWER_STATE rtState; |
| |
| pAdapter->HalFunc.GetHwRegHandler(pAdapter, HW_VAR_RF_STATE, (pu1Byte)(&rtState)); |
| |
| // When RF is off, we should not count the packet for hw/sw synchronize |
| // reason, ie. there may be a duration while sw switch is changed and hw |
| // switch is being changed. 2006.12.04, by shien chang. |
| if (rtState == eRfOff) |
| { |
| return; |
| } |
| #endif |
| |
| #ifdef TODO |
| if(pAdapter->bInHctTest) |
| return; |
| #endif |
| /* We can not know the packet length and transmit type: broadcast or uni |
| or multicast. So the relative statistics must be collected in tx |
| feedback info. */ |
| if (pstx_fb->tok) |
| { |
| priv->stats.txfeedbackok++; |
| priv->stats.txoktotal++; |
| priv->stats.txokbytestotal += pstx_fb->pkt_length; |
| priv->stats.txokinperiod++; |
| |
| /* We can not make sure broadcast/multicast or unicast mode. */ |
| if (pstx_fb->pkt_type == PACKET_MULTICAST) |
| { |
| priv->stats.txmulticast++; |
| priv->stats.txbytesmulticast += pstx_fb->pkt_length; |
| } |
| else if (pstx_fb->pkt_type == PACKET_BROADCAST) |
| { |
| priv->stats.txbroadcast++; |
| priv->stats.txbytesbroadcast += pstx_fb->pkt_length; |
| } |
| else |
| { |
| priv->stats.txunicast++; |
| priv->stats.txbytesunicast += pstx_fb->pkt_length; |
| } |
| } |
| else |
| { |
| priv->stats.txfeedbackfail++; |
| priv->stats.txerrtotal++; |
| priv->stats.txerrbytestotal += pstx_fb->pkt_length; |
| |
| /* We can not make sure broadcast/multicast or unicast mode. */ |
| if (pstx_fb->pkt_type == PACKET_MULTICAST) |
| { |
| priv->stats.txerrmulticast++; |
| } |
| else if (pstx_fb->pkt_type == PACKET_BROADCAST) |
| { |
| priv->stats.txerrbroadcast++; |
| } |
| else |
| { |
| priv->stats.txerrunicast++; |
| } |
| } |
| |
| priv->stats.txretrycount += pstx_fb->retry_cnt; |
| priv->stats.txfeedbackretry += pstx_fb->retry_cnt; |
| |
| } /* cmpk_CountTxStatistic */ |
| |
| |
| |
| /*----------------------------------------------------------------------------- |
| * Function: cmpk_handle_tx_feedback() |
| * |
| * Overview: The function is responsible for extract the message inside TX |
| * feedbck message from firmware. It will contain dedicated info in |
| * ws-06-0063-rtl8190-command-packet-specification. Please |
| * refer to chapter "TX Feedback Element". We have to read 20 bytes |
| * in the command packet. |
| * |
| * Input: struct net_device * dev |
| * u8 * pmsg - Msg Ptr of the command packet. |
| * |
| * Output: NONE |
| * |
| * Return: NONE |
| * |
| * Revised History: |
| * When Who Remark |
| * 05/08/2008 amy Create Version 0 porting from windows code. |
| * |
| *---------------------------------------------------------------------------*/ |
| static void |
| cmpk_handle_tx_feedback( |
| struct net_device *dev, |
| u8 * pmsg) |
| { |
| struct r8192_priv *priv = ieee80211_priv(dev); |
| cmpk_txfb_t rx_tx_fb; /* */ |
| |
| priv->stats.txfeedback++; |
| |
| /* 0. Display received message. */ |
| //cmpk_Display_Message(CMPK_RX_TX_FB_SIZE, pMsg); |
| |
| /* 1. Extract TX feedback info from RFD to temp structure buffer. */ |
| /* It seems that FW use big endian(MIPS) and DRV use little endian in |
| windows OS. So we have to read the content byte by byte or transfer |
| endian type before copy the message copy. */ |
| #if 0 // The TX FEEDBACK packet element address |
| //rx_tx_fb.Element_ID = pMsg[0]; |
| //rx_tx_fb.Length = pMsg[1]; |
| rx_tx_fb.TOK = pMsg[2]>>7; |
| rx_tx_fb.Fail_Reason = (pMsg[2] & 0x70) >> 4; |
| rx_tx_fb.TID = (pMsg[2] & 0x0F); |
| rx_tx_fb.Qos_Pkt = pMsg[3] >> 7; |
| rx_tx_fb.Bandwidth = (pMsg[3] & 0x40) >> 6; |
| rx_tx_fb.Retry_Cnt = pMsg[5]; |
| rx_tx_fb.Pkt_ID = (pMsg[6] << 8) | pMsg[7]; |
| rx_tx_fb.Seq_Num = (pMsg[8] << 8) | pMsg[9]; |
| rx_tx_fb.S_Rate = pMsg[10]; |
| rx_tx_fb.F_Rate = pMsg[11]; |
| rx_tx_fb.S_RTS_Rate = pMsg[12]; |
| rx_tx_fb.F_RTS_Rate = pMsg[13]; |
| rx_tx_fb.pkt_length = (pMsg[14] << 8) | pMsg[15]; |
| #endif |
| /* 2007/07/05 MH Use pointer to transfer structure memory. */ |
| //memcpy((UINT8 *)&rx_tx_fb, pMsg, sizeof(CMPK_TXFB_T)); |
| memcpy((u8*)&rx_tx_fb, pmsg, sizeof(cmpk_txfb_t)); |
| /* 2. Use tx feedback info to count TX statistics. */ |
| cmpk_count_txstatistic(dev, &rx_tx_fb); |
| #if 0 |
| /* 2007/07/11 MH Assign current operate rate. */ |
| if (pAdapter->RegWirelessMode == WIRELESS_MODE_A || |
| pAdapter->RegWirelessMode == WIRELESS_MODE_B || |
| pAdapter->RegWirelessMode == WIRELESS_MODE_G) |
| { |
| pMgntInfo->CurrentOperaRate = (rx_tx_fb.F_Rate & 0x7F); |
| } |
| else if (pAdapter->RegWirelessMode == WIRELESS_MODE_N_24G || |
| pAdapter->RegWirelessMode == WIRELESS_MODE_N_5G) |
| { |
| pMgntInfo->HTCurrentOperaRate = (rx_tx_fb.F_Rate & 0x8F); |
| } |
| #endif |
| /* 2007/01/17 MH Comment previous method for TX statistic function. */ |
| /* Collect info TX feedback packet to fill TCB. */ |
| /* We can not know the packet length and transmit type: broadcast or uni |
| or multicast. */ |
| //CountTxStatistics( pAdapter, &tcb ); |
| |
| } /* cmpk_Handle_Tx_Feedback */ |
| |
| static void cmdpkt_beacontimerinterrupt_819xusb(struct net_device *dev) |
| { |
| struct r8192_priv *priv = ieee80211_priv(dev); |
| u16 tx_rate; |
| { |
| // |
| // 070117, rcnjko: 87B have to S/W beacon for DTM encryption_cmn. |
| // |
| if((priv->ieee80211->current_network.mode == IEEE_A) || |
| (priv->ieee80211->current_network.mode == IEEE_N_5G) || |
| ((priv->ieee80211->current_network.mode == IEEE_N_24G) && (!priv->ieee80211->pHTInfo->bCurSuppCCK))) |
| { |
| tx_rate = 60; |
| DMESG("send beacon frame tx rate is 6Mbpm\n"); |
| } |
| else |
| { |
| tx_rate =10; |
| DMESG("send beacon frame tx rate is 1Mbpm\n"); |
| } |
| |
| //rtl819xusb_beacon_tx(dev,tx_rate); // HW Beacon |
| |
| } |
| |
| } |
| |
| |
| |
| |
| /*----------------------------------------------------------------------------- |
| * Function: cmpk_handle_interrupt_status() |
| * |
| * Overview: The function is responsible for extract the message from |
| * firmware. It will contain dedicated info in |
| * ws-07-0063-v06-rtl819x-command-packet-specification-070315.doc. |
| * Please refer to chapter "Interrupt Status Element". |
| * |
| * Input: struct net_device *dev, |
| * u8* pmsg - Message Pointer of the command packet. |
| * |
| * Output: NONE |
| * |
| * Return: NONE |
| * |
| * Revised History: |
| * When Who Remark |
| * 05/12/2008 amy Add this for rtl8192 porting from windows code. |
| * |
| *---------------------------------------------------------------------------*/ |
| static void |
| cmpk_handle_interrupt_status( |
| struct net_device *dev, |
| u8* pmsg) |
| { |
| cmpk_intr_sta_t rx_intr_status; /* */ |
| struct r8192_priv *priv = ieee80211_priv(dev); |
| |
| DMESG("---> cmpk_Handle_Interrupt_Status()\n"); |
| |
| /* 0. Display received message. */ |
| //cmpk_Display_Message(CMPK_RX_BEACON_STATE_SIZE, pMsg); |
| |
| /* 1. Extract TX feedback info from RFD to temp structure buffer. */ |
| /* It seems that FW use big endian(MIPS) and DRV use little endian in |
| windows OS. So we have to read the content byte by byte or transfer |
| endian type before copy the message copy. */ |
| //rx_bcn_state.Element_ID = pMsg[0]; |
| //rx_bcn_state.Length = pMsg[1]; |
| rx_intr_status.length = pmsg[1]; |
| if (rx_intr_status.length != (sizeof(cmpk_intr_sta_t) - 2)) |
| { |
| DMESG("cmpk_Handle_Interrupt_Status: wrong length!\n"); |
| return; |
| } |
| |
| |
| // Statistics of beacon for ad-hoc mode. |
| if( priv->ieee80211->iw_mode == IW_MODE_ADHOC) |
| { |
| //2 maybe need endian transform? |
| rx_intr_status.interrupt_status = *((u32 *)(pmsg + 4)); |
| //rx_intr_status.InterruptStatus = N2H4BYTE(*((UINT32 *)(pMsg + 4))); |
| |
| DMESG("interrupt status = 0x%x\n", rx_intr_status.interrupt_status); |
| |
| if (rx_intr_status.interrupt_status & ISR_TxBcnOk) |
| { |
| priv->ieee80211->bibsscoordinator = true; |
| priv->stats.txbeaconokint++; |
| } |
| else if (rx_intr_status.interrupt_status & ISR_TxBcnErr) |
| { |
| priv->ieee80211->bibsscoordinator = false; |
| priv->stats.txbeaconerr++; |
| } |
| |
| if (rx_intr_status.interrupt_status & ISR_BcnTimerIntr) |
| { |
| cmdpkt_beacontimerinterrupt_819xusb(dev); |
| } |
| |
| } |
| |
| // Other informations in interrupt status we need? |
| |
| |
| DMESG("<---- cmpk_handle_interrupt_status()\n"); |
| |
| } /* cmpk_handle_interrupt_status */ |
| |
| |
| /*----------------------------------------------------------------------------- |
| * Function: cmpk_handle_query_config_rx() |
| * |
| * Overview: The function is responsible for extract the message from |
| * firmware. It will contain dedicated info in |
| * ws-06-0063-rtl8190-command-packet-specification. Please |
| * refer to chapter "Beacon State Element". |
| * |
| * Input: u8 * pmsg - Message Pointer of the command packet. |
| * |
| * Output: NONE |
| * |
| * Return: NONE |
| * |
| * Revised History: |
| * When Who Remark |
| * 05/12/2008 amy Create Version 0 porting from windows code. |
| * |
| *---------------------------------------------------------------------------*/ |
| static void |
| cmpk_handle_query_config_rx( |
| struct net_device *dev, |
| u8* pmsg) |
| { |
| cmpk_query_cfg_t rx_query_cfg; /* */ |
| |
| /* 0. Display received message. */ |
| //cmpk_Display_Message(CMPK_RX_BEACON_STATE_SIZE, pMsg); |
| |
| /* 1. Extract TX feedback info from RFD to temp structure buffer. */ |
| /* It seems that FW use big endian(MIPS) and DRV use little endian in |
| windows OS. So we have to read the content byte by byte or transfer |
| endian type before copy the message copy. */ |
| //rx_query_cfg.Element_ID = pMsg[0]; |
| //rx_query_cfg.Length = pMsg[1]; |
| rx_query_cfg.cfg_action = (pmsg[4] & 0x80000000)>>31; |
| rx_query_cfg.cfg_type = (pmsg[4] & 0x60) >> 5; |
| rx_query_cfg.cfg_size = (pmsg[4] & 0x18) >> 3; |
| rx_query_cfg.cfg_page = (pmsg[6] & 0x0F) >> 0; |
| rx_query_cfg.cfg_offset = pmsg[7]; |
| rx_query_cfg.value = (pmsg[8] << 24) | (pmsg[9] << 16) | |
| (pmsg[10] << 8) | (pmsg[11] << 0); |
| rx_query_cfg.mask = (pmsg[12] << 24) | (pmsg[13] << 16) | |
| (pmsg[14] << 8) | (pmsg[15] << 0); |
| |
| } /* cmpk_Handle_Query_Config_Rx */ |
| |
| |
| /*----------------------------------------------------------------------------- |
| * Function: cmpk_count_tx_status() |
| * |
| * Overview: Count aggregated tx status from firmwar of one type rx command |
| * packet element id = RX_TX_STATUS. |
| * |
| * Input: NONE |
| * |
| * Output: NONE |
| * |
| * Return: NONE |
| * |
| * Revised History: |
| * When Who Remark |
| * 05/12/2008 amy Create Version 0 porting from windows code. |
| * |
| *---------------------------------------------------------------------------*/ |
| static void cmpk_count_tx_status( struct net_device *dev, |
| cmpk_tx_status_t *pstx_status) |
| { |
| struct r8192_priv *priv = ieee80211_priv(dev); |
| |
| #ifdef ENABLE_PS |
| |
| RT_RF_POWER_STATE rtstate; |
| |
| pAdapter->HalFunc.GetHwRegHandler(pAdapter, HW_VAR_RF_STATE, (pu1Byte)(&rtState)); |
| |
| // When RF is off, we should not count the packet for hw/sw synchronize |
| // reason, ie. there may be a duration while sw switch is changed and hw |
| // switch is being changed. 2006.12.04, by shien chang. |
| if (rtState == eRfOff) |
| { |
| return; |
| } |
| #endif |
| |
| priv->stats.txfeedbackok += pstx_status->txok; |
| priv->stats.txoktotal += pstx_status->txok; |
| |
| priv->stats.txfeedbackfail += pstx_status->txfail; |
| priv->stats.txerrtotal += pstx_status->txfail; |
| |
| priv->stats.txretrycount += pstx_status->txretry; |
| priv->stats.txfeedbackretry += pstx_status->txretry; |
| |
| //pAdapter->TxStats.NumTxOkBytesTotal += psTx_FB->pkt_length; |
| //pAdapter->TxStats.NumTxErrBytesTotal += psTx_FB->pkt_length; |
| //pAdapter->MgntInfo.LinkDetectInfo.NumTxOkInPeriod++; |
| |
| priv->stats.txmulticast += pstx_status->txmcok; |
| priv->stats.txbroadcast += pstx_status->txbcok; |
| priv->stats.txunicast += pstx_status->txucok; |
| |
| priv->stats.txerrmulticast += pstx_status->txmcfail; |
| priv->stats.txerrbroadcast += pstx_status->txbcfail; |
| priv->stats.txerrunicast += pstx_status->txucfail; |
| |
| priv->stats.txbytesmulticast += pstx_status->txmclength; |
| priv->stats.txbytesbroadcast += pstx_status->txbclength; |
| priv->stats.txbytesunicast += pstx_status->txuclength; |
| |
| priv->stats.last_packet_rate = pstx_status->rate; |
| } /* cmpk_CountTxStatus */ |
| |
| |
| |
| /*----------------------------------------------------------------------------- |
| * Function: cmpk_handle_tx_status() |
| * |
| * Overview: Firmware add a new tx feedback status to reduce rx command |
| * packet buffer operation load. |
| * |
| * Input: NONE |
| * |
| * Output: NONE |
| * |
| * Return: NONE |
| * |
| * Revised History: |
| * When Who Remark |
| * 05/12/2008 amy Create Version 0 porting from windows code. |
| * |
| *---------------------------------------------------------------------------*/ |
| static void |
| cmpk_handle_tx_status( |
| struct net_device *dev, |
| u8* pmsg) |
| { |
| cmpk_tx_status_t rx_tx_sts; /* */ |
| |
| memcpy((void*)&rx_tx_sts, (void*)pmsg, sizeof(cmpk_tx_status_t)); |
| /* 2. Use tx feedback info to count TX statistics. */ |
| cmpk_count_tx_status(dev, &rx_tx_sts); |
| |
| } /* cmpk_Handle_Tx_Status */ |
| |
| |
| /*----------------------------------------------------------------------------- |
| * Function: cmpk_handle_tx_rate_history() |
| * |
| * Overview: Firmware add a new tx rate history |
| * |
| * Input: NONE |
| * |
| * Output: NONE |
| * |
| * Return: NONE |
| * |
| * Revised History: |
| * When Who Remark |
| * 05/12/2008 amy Create Version 0 porting from windows code. |
| * |
| *---------------------------------------------------------------------------*/ |
| static void |
| cmpk_handle_tx_rate_history( |
| struct net_device *dev, |
| u8* pmsg) |
| { |
| cmpk_tx_rahis_t *ptxrate; |
| // RT_RF_POWER_STATE rtState; |
| u8 i, j; |
| u16 length = sizeof(cmpk_tx_rahis_t); |
| u32 *ptemp; |
| struct r8192_priv *priv = ieee80211_priv(dev); |
| |
| |
| #ifdef ENABLE_PS |
| pAdapter->HalFunc.GetHwRegHandler(pAdapter, HW_VAR_RF_STATE, (pu1Byte)(&rtState)); |
| |
| // When RF is off, we should not count the packet for hw/sw synchronize |
| // reason, ie. there may be a duration while sw switch is changed and hw |
| // switch is being changed. 2006.12.04, by shien chang. |
| if (rtState == eRfOff) |
| { |
| return; |
| } |
| #endif |
| |
| ptemp = (u32 *)pmsg; |
| |
| // |
| // Do endian transfer to word alignment(16 bits) for windows system. |
| // You must do different endian transfer for linux and MAC OS |
| // |
| for (i = 0; i < (length/4); i++) |
| { |
| u16 temp1, temp2; |
| |
| temp1 = ptemp[i]&0x0000FFFF; |
| temp2 = ptemp[i]>>16; |
| ptemp[i] = (temp1<<16)|temp2; |
| } |
| |
| ptxrate = (cmpk_tx_rahis_t *)pmsg; |
| |
| if (ptxrate == NULL ) |
| { |
| return; |
| } |
| |
| for (i = 0; i < 16; i++) |
| { |
| // Collect CCK rate packet num |
| if (i < 4) |
| priv->stats.txrate.cck[i] += ptxrate->cck[i]; |
| |
| // Collect OFDM rate packet num |
| if (i< 8) |
| priv->stats.txrate.ofdm[i] += ptxrate->ofdm[i]; |
| |
| for (j = 0; j < 4; j++) |
| priv->stats.txrate.ht_mcs[j][i] += ptxrate->ht_mcs[j][i]; |
| } |
| |
| } /* cmpk_Handle_Tx_Rate_History */ |
| |
| |
| /*----------------------------------------------------------------------------- |
| * Function: cmpk_message_handle_rx() |
| * |
| * Overview: In the function, we will capture different RX command packet |
| * info. Every RX command packet element has different message |
| * length and meaning in content. We only support three type of RX |
| * command packet now. Please refer to document |
| * ws-06-0063-rtl8190-command-packet-specification. |
| * |
| * Input: NONE |
| * |
| * Output: NONE |
| * |
| * Return: NONE |
| * |
| * Revised History: |
| * When Who Remark |
| * 05/06/2008 amy Create Version 0 porting from windows code. |
| * |
| *---------------------------------------------------------------------------*/ |
| u32 cmpk_message_handle_rx(struct net_device *dev, struct ieee80211_rx_stats *pstats) |
| { |
| // u32 debug_level = DBG_LOUD; |
| struct r8192_priv *priv = ieee80211_priv(dev); |
| int total_length; |
| u8 cmd_length, exe_cnt = 0; |
| u8 element_id; |
| u8 *pcmd_buff; |
| |
| RT_TRACE(COMP_EVENTS, "---->cmpk_message_handle_rx()\n"); |
| |
| /* 0. Check inpt arguments. If is is a command queue message or pointer is |
| null. */ |
| if (/*(prfd->queue_id != CMPK_RX_QUEUE_ID) || */(pstats== NULL)) |
| { |
| /* Print error message. */ |
| /*RT_TRACE(COMP_SEND, DebugLevel, |
| ("\n\r[CMPK]-->Err queue id or pointer"));*/ |
| return 0; /* This is not a command packet. */ |
| } |
| |
| /* 1. Read received command packet message length from RFD. */ |
| total_length = pstats->Length; |
| |
| /* 2. Read virtual address from RFD. */ |
| pcmd_buff = pstats->virtual_address; |
| |
| /* 3. Read command pakcet element id and length. */ |
| element_id = pcmd_buff[0]; |
| /*RT_TRACE(COMP_SEND, DebugLevel, |
| ("\n\r[CMPK]-->element ID=%d Len=%d", element_id, total_length));*/ |
| |
| /* 4. Check every received command packet conent according to different |
| element type. Because FW may aggregate RX command packet to minimize |
| transmit time between DRV and FW.*/ |
| // Add a counter to prevent to locked in the loop too long |
| while (total_length > 0 || exe_cnt++ >100) |
| { |
| /* 2007/01/17 MH We support aggregation of different cmd in the same packet. */ |
| element_id = pcmd_buff[0]; |
| |
| switch(element_id) |
| { |
| case RX_TX_FEEDBACK: |
| |
| RT_TRACE(COMP_EVENTS, "---->cmpk_message_handle_rx():RX_TX_FEEDBACK\n"); |
| cmpk_handle_tx_feedback (dev, pcmd_buff); |
| cmd_length = CMPK_RX_TX_FB_SIZE; |
| break; |
| |
| case RX_INTERRUPT_STATUS: |
| |
| RT_TRACE(COMP_EVENTS, "---->cmpk_message_handle_rx():RX_INTERRUPT_STATUS\n"); |
| cmpk_handle_interrupt_status(dev, pcmd_buff); |
| cmd_length = sizeof(cmpk_intr_sta_t); |
| break; |
| |
| case BOTH_QUERY_CONFIG: |
| |
| RT_TRACE(COMP_EVENTS, "---->cmpk_message_handle_rx():BOTH_QUERY_CONFIG\n"); |
| cmpk_handle_query_config_rx(dev, pcmd_buff); |
| cmd_length = CMPK_BOTH_QUERY_CONFIG_SIZE; |
| break; |
| |
| case RX_TX_STATUS: |
| |
| RT_TRACE(COMP_EVENTS, "---->cmpk_message_handle_rx():RX_TX_STATUS\n"); |
| cmpk_handle_tx_status(dev, pcmd_buff); |
| cmd_length = CMPK_RX_TX_STS_SIZE; |
| break; |
| |
| case RX_TX_PER_PKT_FEEDBACK: |
| // You must at lease add a switch case element here, |
| // Otherwise, we will jump to default case. |
| //DbgPrint("CCX Test\r\n"); |
| RT_TRACE(COMP_EVENTS, "---->cmpk_message_handle_rx():RX_TX_PER_PKT_FEEDBACK\n"); |
| cmd_length = CMPK_RX_TX_FB_SIZE; |
| break; |
| |
| case RX_TX_RATE_HISTORY: |
| //DbgPrint(" rx tx rate history\r\n"); |
| |
| RT_TRACE(COMP_EVENTS, "---->cmpk_message_handle_rx():RX_TX_HISTORY\n"); |
| cmpk_handle_tx_rate_history(dev, pcmd_buff); |
| cmd_length = CMPK_TX_RAHIS_SIZE; |
| break; |
| |
| default: |
| |
| RT_TRACE(COMP_EVENTS, "---->cmpk_message_handle_rx():unknown CMD Element\n"); |
| return 1; /* This is a command packet. */ |
| } |
| // 2007/01/22 MH Display received rx command packet info. |
| //cmpk_Display_Message(cmd_length, pcmd_buff); |
| |
| // 2007/01/22 MH Add to display tx statistic. |
| //cmpk_DisplayTxStatistic(pAdapter); |
| |
| /* 2007/03/09 MH Collect sidderent cmd element pkt num. */ |
| priv->stats.rxcmdpkt[element_id]++; |
| |
| total_length -= cmd_length; |
| pcmd_buff += cmd_length; |
| } /* while (total_length > 0) */ |
| return 1; /* This is a command packet. */ |
| |
| RT_TRACE(COMP_EVENTS, "<----cmpk_message_handle_rx()\n"); |
| } /* CMPK_Message_Handle_Rx */ |