| /* |
| This is part of rtl8180 OpenSource driver. |
| Copyright (C) Andrea Merello 2004-2005 <andreamrl@tiscali.it> |
| Released under the terms of GPL (General Public Licence) |
| |
| Parts of this driver are based on the GPL part of the |
| official Realtek driver. |
| Parts of this driver are based on the rtl8180 driver skeleton |
| from Patric Schenke & Andres Salomon. |
| Parts of this driver are based on the Intel Pro Wireless |
| 2100 GPL driver. |
| |
| We want to tanks the Authors of those projects |
| and the Ndiswrapper project Authors. |
| */ |
| |
| /* Mariusz Matuszek added full registers definition with Realtek's name */ |
| |
| /* this file contains register definitions for the rtl8180 MAC controller */ |
| #ifndef R8180_HW |
| #define R8180_HW |
| |
| |
| #define BIT0 0x00000001 |
| #define BIT1 0x00000002 |
| #define BIT2 0x00000004 |
| #define BIT3 0x00000008 |
| #define BIT4 0x00000010 |
| #define BIT5 0x00000020 |
| #define BIT6 0x00000040 |
| #define BIT7 0x00000080 |
| #define BIT9 0x00000200 |
| #define BIT11 0x00000800 |
| #define BIT13 0x00002000 |
| #define BIT15 0x00008000 |
| #define BIT20 0x00100000 |
| #define BIT21 0x00200000 |
| #define BIT22 0x00400000 |
| #define BIT23 0x00800000 |
| #define BIT24 0x01000000 |
| #define BIT25 0x02000000 |
| #define BIT26 0x04000000 |
| #define BIT27 0x08000000 |
| #define BIT28 0x10000000 |
| #define BIT29 0x20000000 |
| #define BIT30 0x40000000 |
| #define BIT31 0x80000000 |
| |
| #define MAX_SLEEP_TIME (10000) |
| #define MIN_SLEEP_TIME (50) |
| |
| #define BB_HOST_BANG_EN (1<<2) |
| #define BB_HOST_BANG_CLK (1<<1) |
| |
| #define MAC0 0 |
| #define MAC4 4 |
| |
| #define CMD 0x37 |
| #define CMD_RST_SHIFT 4 |
| #define CMD_RX_ENABLE_SHIFT 3 |
| #define CMD_TX_ENABLE_SHIFT 2 |
| |
| #define EPROM_CMD 0x50 |
| #define EPROM_CMD_RESERVED_MASK ((1<<5)|(1<<4)) |
| #define EPROM_CMD_OPERATING_MODE_SHIFT 6 |
| #define EPROM_CMD_OPERATING_MODE_MASK ((1<<7)|(1<<6)) |
| #define EPROM_CMD_CONFIG 0x3 |
| #define EPROM_CMD_NORMAL 0 |
| #define EPROM_CMD_LOAD 1 |
| #define EPROM_CMD_PROGRAM 2 |
| #define EPROM_CS_SHIFT 3 |
| #define EPROM_CK_SHIFT 2 |
| #define EPROM_W_SHIFT 1 |
| #define EPROM_R_SHIFT 0 |
| #define CONFIG2_DMA_POLLING_MODE_SHIFT 3 |
| |
| #define INTA_TXOVERFLOW (1<<15) |
| #define INTA_TIMEOUT (1<<14) |
| #define INTA_HIPRIORITYDESCERR (1<<9) |
| #define INTA_HIPRIORITYDESCOK (1<<8) |
| #define INTA_NORMPRIORITYDESCERR (1<<7) |
| #define INTA_NORMPRIORITYDESCOK (1<<6) |
| #define INTA_RXOVERFLOW (1<<5) |
| #define INTA_RXDESCERR (1<<4) |
| #define INTA_LOWPRIORITYDESCERR (1<<3) |
| #define INTA_LOWPRIORITYDESCOK (1<<2) |
| #define INTA_RXOK (1) |
| #define INTA_MASK 0x3c |
| |
| #define RXRING_ADDR 0xe4 // page 0 |
| #define PGSELECT 0x5e |
| #define PGSELECT_PG_SHIFT 0 |
| #define RX_CONF 0x44 |
| #define MAC_FILTER_MASK ((1<<0) | (1<<1) | (1<<2) | (1<<3) | (1<<5) | \ |
| (1<<12) | (1<<18) | (1<<19) | (1<<20) | (1<<21) | (1<<22) | (1<<23)) |
| #define RX_CHECK_BSSID_SHIFT 23 |
| #define ACCEPT_PWR_FRAME_SHIFT 22 |
| #define ACCEPT_MNG_FRAME_SHIFT 20 |
| #define ACCEPT_CTL_FRAME_SHIFT 19 |
| #define ACCEPT_DATA_FRAME_SHIFT 18 |
| #define ACCEPT_ICVERR_FRAME_SHIFT 12 |
| #define ACCEPT_CRCERR_FRAME_SHIFT 5 |
| #define ACCEPT_BCAST_FRAME_SHIFT 3 |
| #define ACCEPT_MCAST_FRAME_SHIFT 2 |
| #define ACCEPT_ALLMAC_FRAME_SHIFT 0 |
| #define ACCEPT_NICMAC_FRAME_SHIFT 1 |
| |
| #define RX_FIFO_THRESHOLD_MASK ((1<<13) | (1<<14) | (1<<15)) |
| #define RX_FIFO_THRESHOLD_SHIFT 13 |
| #define RX_FIFO_THRESHOLD_NONE 7 |
| #define RX_AUTORESETPHY_SHIFT 28 |
| |
| #define TX_CONF 0x40 |
| #define TX_CONF_HEADER_AUTOICREMENT_SHIFT 30 |
| #define TX_LOOPBACK_SHIFT 17 |
| #define TX_LOOPBACK_NONE 0 |
| #define TX_LOOPBACK_CONTINUE 3 |
| #define TX_LOOPBACK_MASK ((1<<17)|(1<<18)) |
| #define TX_DPRETRY_SHIFT 0 |
| #define R8180_MAX_RETRY 255 |
| #define TX_RTSRETRY_SHIFT 8 |
| #define TX_NOICV_SHIFT 19 |
| #define TX_NOCRC_SHIFT 16 |
| #define TX_DMA_POLLING 0xd9 |
| #define TX_DMA_POLLING_BEACON_SHIFT 7 |
| #define TX_DMA_POLLING_HIPRIORITY_SHIFT 6 |
| #define TX_DMA_POLLING_NORMPRIORITY_SHIFT 5 |
| #define TX_DMA_POLLING_LOWPRIORITY_SHIFT 4 |
| #define TX_MANAGEPRIORITY_RING_ADDR 0x0C |
| #define TX_BKPRIORITY_RING_ADDR 0x10 |
| #define TX_BEPRIORITY_RING_ADDR 0x14 |
| #define TX_VIPRIORITY_RING_ADDR 0x20 |
| #define TX_VOPRIORITY_RING_ADDR 0x24 |
| #define TX_HIGHPRIORITY_RING_ADDR 0x28 |
| #define MAX_RX_DMA_MASK ((1<<8) | (1<<9) | (1<<10)) |
| #define MAX_RX_DMA_2048 7 |
| #define MAX_RX_DMA_1024 6 |
| #define MAX_RX_DMA_SHIFT 10 |
| #define INT_TIMEOUT 0x48 |
| #define CONFIG3_CLKRUN_SHIFT 2 |
| #define CONFIG3_ANAPARAM_W_SHIFT 6 |
| #define ANAPARAM 0x54 |
| #define BEACON_INTERVAL 0x70 |
| #define BEACON_INTERVAL_MASK ((1<<0)|(1<<1)|(1<<2)|(1<<3)|(1<<4)|(1<<5)| \ |
| (1<<6)|(1<<7)|(1<<8)|(1<<9)) |
| #define ATIM_MASK ((1<<0)|(1<<1)|(1<<2)|(1<<3)|(1<<4)|(1<<5)|(1<<6)|(1<<7)| \ |
| (1<<8)|(1<<9)) |
| #define ATIM 0x72 |
| #define EPROM_CS_SHIFT 3 |
| #define EPROM_CK_SHIFT 2 |
| #define PHY_ADR 0x7c |
| #define SECURITY 0x5f //1209 this is sth wrong |
| #define SECURITY_WEP_TX_ENABLE_SHIFT 1 |
| #define SECURITY_WEP_RX_ENABLE_SHIFT 0 |
| #define SECURITY_ENCRYP_104 1 |
| #define SECURITY_ENCRYP_SHIFT 4 |
| #define SECURITY_ENCRYP_MASK ((1<<4)|(1<<5)) |
| #define KEY0 0x90 //1209 this is sth wrong |
| #define CONFIG2_ANTENNA_SHIFT 6 |
| #define TX_BEACON_RING_ADDR 0x4c |
| #define CONFIG0_WEP40_SHIFT 7 |
| #define CONFIG0_WEP104_SHIFT 6 |
| #define AGCRESET_SHIFT 5 |
| |
| |
| |
| /* |
| * Operational registers offsets in PCI (I/O) space. |
| * RealTek names are used. |
| */ |
| |
| #define TSFTR 0x0018 |
| |
| #define TLPDA 0x0020 |
| |
| #define BSSID 0x002E |
| |
| #define CR 0x0037 |
| |
| #define RF_SW_CONFIG 0x8 // store data which is transmitted to RF for driver |
| #define RF_SW_CFG_SI BIT1 |
| #define EIFS 0x2D // Extended InterFrame Space Timer, in unit of 4 us. |
| |
| #define BRSR 0x34 // Basic rate set |
| |
| #define IMR 0x006C |
| #define ISR 0x003C |
| |
| #define TCR 0x0040 |
| |
| #define RCR 0x0044 |
| |
| #define TimerInt 0x0048 |
| |
| #define CR9346 0x0050 |
| |
| #define CONFIG0 0x0051 |
| #define CONFIG2 0x0053 |
| |
| #define MSR 0x0058 |
| |
| #define CONFIG3 0x0059 |
| #define CONFIG4 0x005A |
| // SD3 szuyitasi: Mac0x57= CC -> B0 Mac0x60= D1 -> C6 |
| // Mac0x60 = 0x000004C6 power save parameters |
| #define ANAPARM_ASIC_ON 0xB0054D00 |
| #define ANAPARM2_ASIC_ON 0x000004C6 |
| |
| #define ANAPARM_ON ANAPARM_ASIC_ON |
| #define ANAPARM2_ON ANAPARM2_ASIC_ON |
| |
| #define TESTR 0x005B |
| |
| #define PSR 0x005E |
| |
| #define BcnItv 0x0070 |
| |
| #define AtimWnd 0x0072 |
| |
| #define BintrItv 0x0074 |
| |
| #define PhyAddr 0x007C |
| #define PhyDataR 0x007E |
| |
| /* following are for rtl8185 */ |
| #define RFPinsOutput 0x80 |
| #define RFPinsEnable 0x82 |
| #define RF_TIMING 0x8c |
| #define RFPinsSelect 0x84 |
| #define ANAPARAM2 0x60 |
| #define RF_PARA 0x88 |
| #define RFPinsInput 0x86 |
| #define GP_ENABLE 0x90 |
| #define GPIO 0x91 |
| #define SW_CONTROL_GPIO 0x400 |
| #define TX_ANTENNA 0x9f |
| #define TX_GAIN_OFDM 0x9e |
| #define TX_GAIN_CCK 0x9d |
| #define WPA_CONFIG 0xb0 |
| #define TX_AGC_CTL 0x9c |
| #define TX_AGC_CTL_PERPACKET_GAIN_SHIFT 0 |
| #define TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT 1 |
| #define TX_AGC_CTL_FEEDBACK_ANT 2 |
| #define RESP_RATE 0x34 |
| #define SIFS 0xb4 |
| #define DIFS 0xb5 |
| |
| #define SLOT 0xb6 |
| #define CW_CONF 0xbc |
| #define CW_CONF_PERPACKET_RETRY_SHIFT 1 |
| #define CW_CONF_PERPACKET_CW_SHIFT 0 |
| #define CW_VAL 0xbd |
| #define MAX_RESP_RATE_SHIFT 4 |
| #define MIN_RESP_RATE_SHIFT 0 |
| #define RATE_FALLBACK 0xbe |
| |
| #define CONFIG5 0x00D8 |
| |
| #define PHYPR 0xDA //0xDA - 0x0B PHY Parameter Register. |
| |
| #define FEMR 0x1D4 // Function Event Mask register |
| |
| #define FFER 0x00FC |
| #define FFER_END 0x00FF |
| |
| |
| |
| /* |
| * Bitmasks for specific register functions. |
| * Names are derived from the register name and function name. |
| * |
| * <REGISTER>_<FUNCTION>[<bit>] |
| * |
| * this leads to some awkward names... |
| */ |
| |
| #define BRSR_BPLCP ((1<< 8)) |
| #define BRSR_MBR ((1<< 1)|(1<< 0)) |
| #define BRSR_MBR_8185 ((1<< 11)|(1<< 10)|(1<< 9)|(1<< 8)|(1<< 7)|(1<< 6)|(1<< 5)|(1<< 4)|(1<< 3)|(1<< 2)|(1<< 1)|(1<< 0)) |
| #define BRSR_MBR0 ((1<< 0)) |
| #define BRSR_MBR1 ((1<< 1)) |
| |
| #define CR_RST ((1<< 4)) |
| #define CR_RE ((1<< 3)) |
| #define CR_TE ((1<< 2)) |
| #define CR_MulRW ((1<< 0)) |
| |
| #define IMR_Dot11hInt ((1<< 25)) // 802.11h Measurement Interrupt |
| #define IMR_BcnDmaInt ((1<< 24)) // Beacon DMA Interrupt // What differenct between BcnDmaInt and BcnInt??? |
| #define IMR_WakeInt ((1<< 23)) // Wake Up Interrupt |
| #define IMR_TXFOVW ((1<< 22)) // Tx FIFO Overflow Interrupt |
| #define IMR_TimeOut1 ((1<< 21)) // Time Out Interrupt 1 |
| #define IMR_BcnInt ((1<< 20)) // Beacon Time out Interrupt |
| #define IMR_ATIMInt ((1<< 19)) // ATIM Time Out Interrupt |
| #define IMR_TBDER ((1<< 18)) // Tx Beacon Descriptor Error Interrupt |
| #define IMR_TBDOK ((1<< 17)) // Tx Beacon Descriptor OK Interrupt |
| #define IMR_THPDER ((1<< 16)) // Tx High Priority Descriptor Error Interrupt |
| #define IMR_THPDOK ((1<< 15)) // Tx High Priority Descriptor OK Interrupt |
| #define IMR_TVODER ((1<< 14)) // Tx AC_VO Descriptor Error Interrupt |
| #define IMR_TVODOK ((1<< 13)) // Tx AC_VO Descriptor OK Interrupt |
| #define IMR_FOVW ((1<< 12)) // Rx FIFO Overflow Interrupt |
| #define IMR_RDU ((1<< 11)) // Rx Descriptor Unavailable Interrupt |
| #define IMR_TVIDER ((1<< 10)) // Tx AC_VI Descriptor Error Interrupt |
| #define IMR_TVIDOK ((1<< 9)) // Tx AC_VI Descriptor OK Interrupt |
| #define IMR_RER ((1<< 8)) // Rx Error Interrupt |
| #define IMR_ROK ((1<< 7)) // Receive OK Interrupt |
| #define IMR_TBEDER ((1<< 6)) // Tx AC_BE Descriptor Error Interrupt |
| #define IMR_TBEDOK ((1<< 5)) // Tx AC_BE Descriptor OK Interrupt |
| #define IMR_TBKDER ((1<< 4)) // Tx AC_BK Descriptor Error Interrupt |
| #define IMR_TBKDOK ((1<< 3)) // Tx AC_BK Descriptor OK Interrupt |
| #define IMR_RQoSOK ((1<< 2)) // Rx QoS OK Interrupt |
| #define IMR_TimeOut2 ((1<< 1)) // Time Out Interrupt 2 |
| #define IMR_TimeOut3 ((1<< 0)) // Time Out Interrupt 3 |
| #define IMR_TMGDOK ((1<<30)) |
| #define ISR_Dot11hInt ((1<< 25)) // 802.11h Measurement Interrupt |
| #define ISR_BcnDmaInt ((1<< 24)) // Beacon DMA Interrupt // What differenct between BcnDmaInt and BcnInt??? |
| #define ISR_WakeInt ((1<< 23)) // Wake Up Interrupt |
| #define ISR_TXFOVW ((1<< 22)) // Tx FIFO Overflow Interrupt |
| #define ISR_TimeOut1 ((1<< 21)) // Time Out Interrupt 1 |
| #define ISR_BcnInt ((1<< 20)) // Beacon Time out Interrupt |
| #define ISR_ATIMInt ((1<< 19)) // ATIM Time Out Interrupt |
| #define ISR_TBDER ((1<< 18)) // Tx Beacon Descriptor Error Interrupt |
| #define ISR_TBDOK ((1<< 17)) // Tx Beacon Descriptor OK Interrupt |
| #define ISR_THPDER ((1<< 16)) // Tx High Priority Descriptor Error Interrupt |
| #define ISR_THPDOK ((1<< 15)) // Tx High Priority Descriptor OK Interrupt |
| #define ISR_TVODER ((1<< 14)) // Tx AC_VO Descriptor Error Interrupt |
| #define ISR_TVODOK ((1<< 13)) // Tx AC_VO Descriptor OK Interrupt |
| #define ISR_FOVW ((1<< 12)) // Rx FIFO Overflow Interrupt |
| #define ISR_RDU ((1<< 11)) // Rx Descriptor Unavailable Interrupt |
| #define ISR_TVIDER ((1<< 10)) // Tx AC_VI Descriptor Error Interrupt |
| #define ISR_TVIDOK ((1<< 9)) // Tx AC_VI Descriptor OK Interrupt |
| #define ISR_RER ((1<< 8)) // Rx Error Interrupt |
| #define ISR_ROK ((1<< 7)) // Receive OK Interrupt |
| #define ISR_TBEDER ((1<< 6)) // Tx AC_BE Descriptor Error Interrupt |
| #define ISR_TBEDOK ((1<< 5)) // Tx AC_BE Descriptor OK Interrupt |
| #define ISR_TBKDER ((1<< 4)) // Tx AC_BK Descriptor Error Interrupt |
| #define ISR_TBKDOK ((1<< 3)) // Tx AC_BK Descriptor OK Interrupt |
| #define ISR_RQoSOK ((1<< 2)) // Rx QoS OK Interrupt |
| #define ISR_TimeOut2 ((1<< 1)) // Time Out Interrupt 2 |
| #define ISR_TimeOut3 ((1<< 0)) // Time Out Interrupt 3 |
| |
| //these definition is used for Tx/Rx test temporarily |
| #define ISR_TLPDER ISR_TVIDER |
| #define ISR_TLPDOK ISR_TVIDOK |
| #define ISR_TNPDER ISR_TVODER |
| #define ISR_TNPDOK ISR_TVODOK |
| #define ISR_TimeOut ISR_TimeOut1 |
| #define ISR_RXFOVW ISR_FOVW |
| |
| |
| #define HW_VERID_R8180_F 3 |
| #define HW_VERID_R8180_ABCD 2 |
| #define HW_VERID_R8185_ABC 4 |
| #define HW_VERID_R8185_D 5 |
| #define HW_VERID_R8185B_B 6 |
| |
| #define TCR_CWMIN ((1<<31)) |
| #define TCR_SWSEQ ((1<<30)) |
| #define TCR_HWVERID_MASK ((1<<27)|(1<<26)|(1<<25)) |
| #define TCR_HWVERID_SHIFT 25 |
| #define TCR_SAT ((1<<24)) |
| #define TCR_PLCP_LEN TCR_SAT // rtl8180 |
| #define TCR_MXDMA_MASK ((1<<23)|(1<<22)|(1<<21)) |
| #define TCR_MXDMA_1024 6 |
| #define TCR_MXDMA_2048 7 |
| #define TCR_MXDMA_SHIFT 21 |
| #define TCR_DISCW ((1<<20)) |
| #define TCR_ICV ((1<<19)) |
| #define TCR_LBK ((1<<18)|(1<<17)) |
| #define TCR_LBK1 ((1<<18)) |
| #define TCR_LBK0 ((1<<17)) |
| #define TCR_CRC ((1<<16)) |
| #define TCR_DPRETRY_MASK ((1<<15)|(1<<14)|(1<<13)|(1<<12)|(1<<11)|(1<<10)|(1<<9)|(1<<8)) |
| #define TCR_RTSRETRY_MASK ((1<<0)|(1<<1)|(1<<2)|(1<<3)|(1<<4)|(1<<5)|(1<<6)|(1<<7)) |
| #define TCR_PROBE_NOTIMESTAMP_SHIFT 29 //rtl8185 |
| |
| #define RCR_ONLYERLPKT ((1<<31)) |
| #define RCR_CS_SHIFT 29 |
| #define RCR_CS_MASK ((1<<30) | (1<<29)) |
| #define RCR_ENMARP ((1<<28)) |
| #define RCR_CBSSID ((1<<23)) |
| #define RCR_APWRMGT ((1<<22)) |
| #define RCR_ADD3 ((1<<21)) |
| #define RCR_AMF ((1<<20)) |
| #define RCR_ACF ((1<<19)) |
| #define RCR_ADF ((1<<18)) |
| #define RCR_RXFTH ((1<<15)|(1<<14)|(1<<13)) |
| #define RCR_RXFTH2 ((1<<15)) |
| #define RCR_RXFTH1 ((1<<14)) |
| #define RCR_RXFTH0 ((1<<13)) |
| #define RCR_AICV ((1<<12)) |
| #define RCR_MXDMA ((1<<10)|(1<< 9)|(1<< 8)) |
| #define RCR_MXDMA2 ((1<<10)) |
| #define RCR_MXDMA1 ((1<< 9)) |
| #define RCR_MXDMA0 ((1<< 8)) |
| #define RCR_9356SEL ((1<< 6)) |
| #define RCR_ACRC32 ((1<< 5)) |
| #define RCR_AB ((1<< 3)) |
| #define RCR_AM ((1<< 2)) |
| #define RCR_APM ((1<< 1)) |
| #define RCR_AAP ((1<< 0)) |
| |
| #define CR9346_EEM ((1<<7)|(1<<6)) |
| #define CR9346_EEM1 ((1<<7)) |
| #define CR9346_EEM0 ((1<<6)) |
| #define CR9346_EECS ((1<<3)) |
| #define CR9346_EESK ((1<<2)) |
| #define CR9346_EED1 ((1<<1)) |
| #define CR9346_EED0 ((1<<0)) |
| |
| #define CONFIG3_PARM_En ((1<<6)) |
| #define CONFIG3_FuncRegEn ((1<<1)) |
| |
| #define CONFIG4_PWRMGT ((1<<5)) |
| |
| #define MSR_LINK_MASK ((1<<2)|(1<<3)) |
| #define MSR_LINK_MANAGED 2 |
| #define MSR_LINK_NONE 0 |
| #define MSR_LINK_SHIFT 2 |
| #define MSR_LINK_ADHOC 1 |
| #define MSR_LINK_MASTER 3 |
| |
| #define BcnItv_BcnItv (0x01FF) |
| |
| #define AtimWnd_AtimWnd (0x01FF) |
| |
| #define BintrItv_BintrItv (0x01FF) |
| |
| #define FEMR_INTR ((1<<15)) |
| #define FEMR_WKUP ((1<<14)) |
| #define FEMR_GWAKE ((1<< 4)) |
| |
| #define FFER_INTR ((1<<15)) |
| #define FFER_GWAKE ((1<< 4)) |
| |
| // Three wire mode. |
| #define SW_THREE_WIRE 0 |
| #define HW_THREE_WIRE 2 |
| //RTL8187S by amy |
| #define HW_THREE_WIRE_PI 5 |
| #define HW_THREE_WIRE_SI 6 |
| //by amy |
| #define TCR_LRL_OFFSET 0 |
| #define TCR_SRL_OFFSET 8 |
| #define TCR_MXDMA_OFFSET 21 |
| #define TCR_DISReqQsize_OFFSET 28 |
| #define TCR_DurProcMode_OFFSET 30 |
| |
| #define RCR_MXDMA_OFFSET 8 |
| #define RCR_FIFO_OFFSET 13 |
| |
| #define AckTimeOutReg 0x79 // ACK timeout register, in unit of 4 us. |
| |
| #define RFTiming 0x8C |
| |
| #define TPPollStop 0x93 |
| |
| #define TXAGC_CTL 0x9C // <RJ_TODO_8185B> TX_AGC_CONTROL (0x9C seems be removed at 8185B, see p37). |
| #define CCK_TXAGC 0x9D |
| #define OFDM_TXAGC 0x9E |
| #define ANTSEL 0x9F |
| |
| #define ACM_CONTROL 0x00BF // ACM Control Registe |
| |
| #define IntMig 0xE2 // Interrupt Migration (0xE2 ~ 0xE3) |
| |
| #define TID_AC_MAP 0xE8 // TID to AC Mapping Register |
| |
| #define ANAPARAM3 0xEE // <RJ_TODO_8185B> How to use it? |
| |
| #define AC_VO_PARAM 0xF0 // AC_VO Parameters Record |
| #define AC_VI_PARAM 0xF4 // AC_VI Parameters Record |
| #define AC_BE_PARAM 0xF8 // AC_BE Parameters Record |
| #define AC_BK_PARAM 0xFC // AC_BK Parameters Record |
| |
| #define GPIOCtrl 0x16B // GPIO Control Register. |
| #define ARFR 0x1E0 // Auto Rate Fallback Register (0x1e0 ~ 0x1e2) |
| |
| #define RFSW_CTRL 0x272 // 0x272-0x273. |
| #define SW_3W_DB0 0x274 // Software 3-wire data buffer bit 31~0. |
| #define SW_3W_DB1 0x278 // Software 3-wire data buffer bit 63~32. |
| #define SW_3W_CMD0 0x27C // Software 3-wire Control/Status Register. |
| #define SW_3W_CMD1 0x27D // Software 3-wire Control/Status Register. |
| |
| #define PI_DATA_READ 0X360 // 0x360 - 0x361 Parallel Interface Data Register. |
| #define SI_DATA_READ 0x362 // 0x362 - 0x363 Serial Interface Data Register. |
| |
| //---------------------------------------------------------------------------- |
| // 8185B TPPollStop bits (offset 0x93, 1 byte) |
| //---------------------------------------------------------------------------- |
| #define TPPOLLSTOP_BQ (0x01 << 7) |
| #define TPPOLLSTOP_AC_VIQ (0x01 << 4) |
| |
| #define MSR_LINK_ENEDCA (1<<4) |
| |
| //---------------------------------------------------------------------------- |
| // 8187B AC_XX_PARAM bits |
| //---------------------------------------------------------------------------- |
| #define AC_PARAM_TXOP_LIMIT_OFFSET 16 |
| #define AC_PARAM_ECW_MAX_OFFSET 12 |
| #define AC_PARAM_ECW_MIN_OFFSET 8 |
| #define AC_PARAM_AIFS_OFFSET 0 |
| |
| //---------------------------------------------------------------------------- |
| // 8187B ACM_CONTROL bits (Offset 0xBF, 1 Byte) |
| //---------------------------------------------------------------------------- |
| #define VOQ_ACM_EN (0x01 << 7) //BIT7 |
| #define VIQ_ACM_EN (0x01 << 6) //BIT6 |
| #define BEQ_ACM_EN (0x01 << 5) //BIT5 |
| #define ACM_HW_EN (0x01 << 4) //BIT4 |
| #define VOQ_ACM_CTL (0x01 << 2) //BIT2 // Set to 1 when AC_VO used time reaches or exceeds the admitted time |
| #define VIQ_ACM_CTL (0x01 << 1) //BIT1 // Set to 1 when AC_VI used time reaches or exceeds the admitted time |
| #define BEQ_ACM_CTL (0x01 << 0) //BIT0 // Set to 1 when AC_BE used time reaches or exceeds the admitted time |
| |
| |
| //---------------------------------------------------------------------------- |
| // 8185B SW_3W_CMD bits (Offset 0x27C-0x27D, 16bit) |
| //---------------------------------------------------------------------------- |
| #define SW_3W_CMD0_HOLD ((1<< 7)) |
| #define SW_3W_CMD1_RE ((1<< 0)) // BIT8 |
| #define SW_3W_CMD1_WE ((1<< 1)) // BIT9 |
| #define SW_3W_CMD1_DONE ((1<< 2)) // BIT10 |
| |
| #define BB_HOST_BANG_RW (1<<3) |
| |
| //---------------------------------------------------------------------------- |
| // 8185B RATE_FALLBACK_CTL bits (Offset 0xBE, 8bit) |
| //---------------------------------------------------------------------------- |
| #define RATE_FALLBACK_CTL_ENABLE ((1<< 7)) |
| #define RATE_FALLBACK_CTL_ENABLE_RTSCTS ((1<< 6)) |
| // Auto rate fallback per 2^n retry. |
| #define RATE_FALLBACK_CTL_AUTO_STEP0 0x00 |
| #define RATE_FALLBACK_CTL_AUTO_STEP1 0x01 |
| #define RATE_FALLBACK_CTL_AUTO_STEP2 0x02 |
| #define RATE_FALLBACK_CTL_AUTO_STEP3 0x03 |
| |
| |
| #define RTL8225z2_ANAPARAM_OFF 0x55480658 |
| #define RTL8225z2_ANAPARAM2_OFF 0x72003f70 |
| //by amy for power save |
| #define RF_CHANGE_BY_HW BIT30 |
| #define RF_CHANGE_BY_PS BIT29 |
| #define RF_CHANGE_BY_IPS BIT28 |
| //by amy for power save |
| //by amy for antenna |
| #define EEPROM_SW_REVD_OFFSET 0x3f |
| // BIT[8-9] is for SW Antenna Diversity. Only the value EEPROM_SW_AD_ENABLE means enable, other values are diable. |
| #define EEPROM_SW_AD_MASK 0x0300 |
| #define EEPROM_SW_AD_ENABLE 0x0100 |
| |
| // BIT[10-11] determine if Antenna 1 is the Default Antenna. Only the value EEPROM_DEF_ANT_1 means TRUE, other values are FALSE. |
| #define EEPROM_DEF_ANT_MASK 0x0C00 |
| #define EEPROM_DEF_ANT_1 0x0400 |
| //by amy for antenna |
| //{by amy 080312 |
| //0x7C, 0x7D Crystal calibration and Tx Power tracking mechanism. Added by Roger. 2007.12.10. |
| #define EEPROM_RSV 0x7C |
| #define EEPROM_XTAL_CAL_XOUT_MASK 0x0F // 0x7C[3:0], Crystal calibration for Xout. |
| #define EEPROM_XTAL_CAL_XIN_MASK 0xF0 // 0x7C[7:4], Crystal calibration for Xin. |
| #define EEPROM_THERMAL_METER_MASK 0x0F00 // 0x7D[3:0], Thermal meter reference level. |
| #define EEPROM_XTAL_CAL_ENABLE 0x1000 // 0x7D[4], Crystal calibration enabled/disabled BIT. |
| #define EEPROM_THERMAL_METER_ENABLE 0x2000 // 0x7D[5], Thermal meter enabled/disabled BIT. |
| #define EN_LPF_CAL 0x238 // Enable LPF Calibration. |
| #define PWR_METER_EN BIT1 |
| // <RJ_TODO_8185B> where are false alarm counters in 8185B? |
| #define CCK_FALSE_ALARM 0xD0 |
| //by amy 080312} |
| |
| //YJ,add for Country IE, 080630 |
| #define EEPROM_COUNTRY_CODE 0x2E |
| //YJ,add,080630,end |
| |
| #endif |
