| /* IEEE 802.11 SoftMAC layer |
| * Copyright (c) 2005 Andrea Merello <andreamrl@tiscali.it> |
| * |
| * Mostly extracted from the rtl8180-sa2400 driver for the |
| * in-kernel generic ieee802.11 stack. |
| * |
| * Some pieces of code might be stolen from ipw2100 driver |
| * copyright of who own it's copyright ;-) |
| * |
| * PS wx handler mostly stolen from hostap, copyright who |
| * own it's copyright ;-) |
| * |
| * released under the GPL |
| */ |
| |
| |
| #include "ieee80211.h" |
| |
| /* FIXME: add A freqs */ |
| |
| const long ieee80211_wlan_frequencies[] = { |
| 2412, 2417, 2422, 2427, |
| 2432, 2437, 2442, 2447, |
| 2452, 2457, 2462, 2467, |
| 2472, 2484 |
| }; |
| |
| |
| int ieee80211_wx_set_freq(struct ieee80211_device *ieee, struct iw_request_info *a, |
| union iwreq_data *wrqu, char *b) |
| { |
| int ret; |
| struct iw_freq *fwrq = & wrqu->freq; |
| // printk("in %s\n",__func__); |
| down(&ieee->wx_sem); |
| |
| if(ieee->iw_mode == IW_MODE_INFRA){ |
| ret = -EOPNOTSUPP; |
| goto out; |
| } |
| |
| /* if setting by freq convert to channel */ |
| if (fwrq->e == 1) { |
| if ((fwrq->m >= (int) 2.412e8 && |
| fwrq->m <= (int) 2.487e8)) { |
| int f = fwrq->m / 100000; |
| int c = 0; |
| |
| while ((c < 14) && (f != ieee80211_wlan_frequencies[c])) |
| c++; |
| |
| /* hack to fall through */ |
| fwrq->e = 0; |
| fwrq->m = c + 1; |
| } |
| } |
| |
| if (fwrq->e > 0 || fwrq->m > 14 || fwrq->m < 1 ){ |
| ret = -EOPNOTSUPP; |
| goto out; |
| |
| }else { /* Set the channel */ |
| |
| |
| ieee->current_network.channel = fwrq->m; |
| ieee->set_chan(ieee->dev, ieee->current_network.channel); |
| |
| if(ieee->iw_mode == IW_MODE_ADHOC || ieee->iw_mode == IW_MODE_MASTER) |
| if(ieee->state == IEEE80211_LINKED){ |
| |
| ieee80211_stop_send_beacons(ieee); |
| ieee80211_start_send_beacons(ieee); |
| } |
| } |
| |
| ret = 0; |
| out: |
| up(&ieee->wx_sem); |
| return ret; |
| } |
| |
| |
| int ieee80211_wx_get_freq(struct ieee80211_device *ieee, |
| struct iw_request_info *a, |
| union iwreq_data *wrqu, char *b) |
| { |
| struct iw_freq *fwrq = & wrqu->freq; |
| |
| if (ieee->current_network.channel == 0) |
| return -1; |
| |
| fwrq->m = ieee->current_network.channel; |
| fwrq->e = 0; |
| |
| return 0; |
| } |
| |
| int ieee80211_wx_get_wap(struct ieee80211_device *ieee, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, char *extra) |
| { |
| unsigned long flags; |
| |
| wrqu->ap_addr.sa_family = ARPHRD_ETHER; |
| |
| if (ieee->iw_mode == IW_MODE_MONITOR) |
| return -1; |
| |
| /* We want avoid to give to the user inconsistent infos*/ |
| spin_lock_irqsave(&ieee->lock, flags); |
| |
| if (ieee->state != IEEE80211_LINKED && |
| ieee->state != IEEE80211_LINKED_SCANNING && |
| ieee->wap_set == 0) |
| |
| memset(wrqu->ap_addr.sa_data, 0, ETH_ALEN); |
| else |
| memcpy(wrqu->ap_addr.sa_data, |
| ieee->current_network.bssid, ETH_ALEN); |
| |
| spin_unlock_irqrestore(&ieee->lock, flags); |
| |
| return 0; |
| } |
| |
| |
| int ieee80211_wx_set_wap(struct ieee80211_device *ieee, |
| struct iw_request_info *info, |
| union iwreq_data *awrq, |
| char *extra) |
| { |
| |
| int ret = 0; |
| u8 zero[] = {0,0,0,0,0,0}; |
| unsigned long flags; |
| |
| short ifup = ieee->proto_started;//dev->flags & IFF_UP; |
| struct sockaddr *temp = (struct sockaddr *)awrq; |
| |
| //printk("=======Set WAP:"); |
| ieee->sync_scan_hurryup = 1; |
| |
| down(&ieee->wx_sem); |
| /* use ifconfig hw ether */ |
| if (ieee->iw_mode == IW_MODE_MASTER){ |
| ret = -1; |
| goto out; |
| } |
| |
| if (temp->sa_family != ARPHRD_ETHER){ |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| if (ifup) |
| ieee80211_stop_protocol(ieee); |
| |
| /* just to avoid to give inconsistent infos in the |
| * get wx method. not really needed otherwise |
| */ |
| spin_lock_irqsave(&ieee->lock, flags); |
| |
| memcpy(ieee->current_network.bssid, temp->sa_data, ETH_ALEN); |
| ieee->wap_set = memcmp(temp->sa_data, zero,ETH_ALEN)!=0; |
| //printk(" %x:%x:%x:%x:%x:%x\n", ieee->current_network.bssid[0],ieee->current_network.bssid[1],ieee->current_network.bssid[2],ieee->current_network.bssid[3],ieee->current_network.bssid[4],ieee->current_network.bssid[5]); |
| |
| spin_unlock_irqrestore(&ieee->lock, flags); |
| |
| if (ifup) |
| ieee80211_start_protocol(ieee); |
| |
| out: |
| up(&ieee->wx_sem); |
| return ret; |
| } |
| |
| int ieee80211_wx_get_essid(struct ieee80211_device *ieee, struct iw_request_info *a,union iwreq_data *wrqu,char *b) |
| { |
| int len,ret = 0; |
| unsigned long flags; |
| |
| if (ieee->iw_mode == IW_MODE_MONITOR) |
| return -1; |
| |
| /* We want avoid to give to the user inconsistent infos*/ |
| spin_lock_irqsave(&ieee->lock, flags); |
| |
| if (ieee->current_network.ssid[0] == '\0' || |
| ieee->current_network.ssid_len == 0){ |
| ret = -1; |
| goto out; |
| } |
| |
| if (ieee->state != IEEE80211_LINKED && |
| ieee->state != IEEE80211_LINKED_SCANNING && |
| ieee->ssid_set == 0){ |
| ret = -1; |
| goto out; |
| } |
| len = ieee->current_network.ssid_len; |
| wrqu->essid.length = len; |
| strncpy(b,ieee->current_network.ssid,len); |
| wrqu->essid.flags = 1; |
| |
| out: |
| spin_unlock_irqrestore(&ieee->lock, flags); |
| |
| return ret; |
| |
| } |
| |
| int ieee80211_wx_set_rate(struct ieee80211_device *ieee, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, char *extra) |
| { |
| |
| u32 target_rate = wrqu->bitrate.value; |
| |
| //added by lizhaoming for auto mode |
| if(target_rate == -1){ |
| ieee->rate = 110; |
| } else { |
| ieee->rate = target_rate/100000; |
| } |
| //FIXME: we might want to limit rate also in management protocols. |
| return 0; |
| } |
| |
| |
| |
| int ieee80211_wx_get_rate(struct ieee80211_device *ieee, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, char *extra) |
| { |
| |
| wrqu->bitrate.value = ieee->rate * 100000; |
| |
| return 0; |
| } |
| |
| int ieee80211_wx_set_mode(struct ieee80211_device *ieee, struct iw_request_info *a, |
| union iwreq_data *wrqu, char *b) |
| { |
| |
| ieee->sync_scan_hurryup = 1; |
| |
| down(&ieee->wx_sem); |
| |
| if (wrqu->mode == ieee->iw_mode) |
| goto out; |
| |
| if (wrqu->mode == IW_MODE_MONITOR){ |
| |
| ieee->dev->type = ARPHRD_IEEE80211; |
| }else{ |
| ieee->dev->type = ARPHRD_ETHER; |
| } |
| |
| if (!ieee->proto_started){ |
| ieee->iw_mode = wrqu->mode; |
| }else{ |
| ieee80211_stop_protocol(ieee); |
| ieee->iw_mode = wrqu->mode; |
| ieee80211_start_protocol(ieee); |
| } |
| |
| out: |
| up(&ieee->wx_sem); |
| return 0; |
| } |
| |
| |
| void ieee80211_wx_sync_scan_wq(struct work_struct *work) |
| { |
| struct ieee80211_device *ieee = container_of(work, struct ieee80211_device, wx_sync_scan_wq); |
| short chan; |
| |
| chan = ieee->current_network.channel; |
| |
| if (ieee->data_hard_stop) |
| ieee->data_hard_stop(ieee->dev); |
| |
| ieee80211_stop_send_beacons(ieee); |
| |
| ieee->state = IEEE80211_LINKED_SCANNING; |
| ieee->link_change(ieee->dev); |
| |
| ieee80211_start_scan_syncro(ieee); |
| |
| ieee->set_chan(ieee->dev, chan); |
| |
| ieee->state = IEEE80211_LINKED; |
| ieee->link_change(ieee->dev); |
| |
| if (ieee->data_hard_resume) |
| ieee->data_hard_resume(ieee->dev); |
| |
| if(ieee->iw_mode == IW_MODE_ADHOC || ieee->iw_mode == IW_MODE_MASTER) |
| ieee80211_start_send_beacons(ieee); |
| |
| //YJ,add,080828, In prevent of lossing ping packet during scanning |
| //ieee80211_sta_ps_send_null_frame(ieee, false); |
| //YJ,add,080828,end |
| |
| up(&ieee->wx_sem); |
| |
| } |
| |
| int ieee80211_wx_set_scan(struct ieee80211_device *ieee, struct iw_request_info *a, |
| union iwreq_data *wrqu, char *b) |
| { |
| int ret = 0; |
| |
| down(&ieee->wx_sem); |
| |
| if (ieee->iw_mode == IW_MODE_MONITOR || !(ieee->proto_started)){ |
| ret = -1; |
| goto out; |
| } |
| //YJ,add,080828 |
| //In prevent of lossing ping packet during scanning |
| //ieee80211_sta_ps_send_null_frame(ieee, true); |
| //YJ,add,080828,end |
| |
| if ( ieee->state == IEEE80211_LINKED){ |
| queue_work(ieee->wq, &ieee->wx_sync_scan_wq); |
| /* intentionally forget to up sem */ |
| return 0; |
| } |
| |
| out: |
| up(&ieee->wx_sem); |
| return ret; |
| } |
| |
| int ieee80211_wx_set_essid(struct ieee80211_device *ieee, |
| struct iw_request_info *a, |
| union iwreq_data *wrqu, char *extra) |
| { |
| |
| int ret=0,len; |
| short proto_started; |
| unsigned long flags; |
| |
| ieee->sync_scan_hurryup = 1; |
| |
| down(&ieee->wx_sem); |
| |
| proto_started = ieee->proto_started; |
| |
| if (wrqu->essid.length > IW_ESSID_MAX_SIZE){ |
| ret= -E2BIG; |
| goto out; |
| } |
| |
| if (ieee->iw_mode == IW_MODE_MONITOR){ |
| ret= -1; |
| goto out; |
| } |
| |
| if(proto_started) |
| ieee80211_stop_protocol(ieee); |
| |
| /* this is just to be sure that the GET wx callback |
| * has consisten infos. not needed otherwise |
| */ |
| spin_lock_irqsave(&ieee->lock, flags); |
| |
| if (wrqu->essid.flags && wrqu->essid.length) { |
| //YJ,modified,080819 |
| len = (wrqu->essid.length < IW_ESSID_MAX_SIZE) ? (wrqu->essid.length) : IW_ESSID_MAX_SIZE; |
| memset(ieee->current_network.ssid, 0, ieee->current_network.ssid_len); //YJ,add,080819 |
| strncpy(ieee->current_network.ssid, extra, len); |
| ieee->current_network.ssid_len = len; |
| ieee->ssid_set = 1; |
| //YJ,modified,080819,end |
| |
| //YJ,add,080819,for hidden ap |
| if(len == 0){ |
| memset(ieee->current_network.bssid, 0, ETH_ALEN); |
| ieee->current_network.capability = 0; |
| } |
| //YJ,add,080819,for hidden ap,end |
| } |
| else{ |
| ieee->ssid_set = 0; |
| ieee->current_network.ssid[0] = '\0'; |
| ieee->current_network.ssid_len = 0; |
| } |
| //printk("==========set essid %s!\n",ieee->current_network.ssid); |
| spin_unlock_irqrestore(&ieee->lock, flags); |
| |
| if (proto_started) |
| ieee80211_start_protocol(ieee); |
| out: |
| up(&ieee->wx_sem); |
| return ret; |
| } |
| |
| int ieee80211_wx_get_mode(struct ieee80211_device *ieee, struct iw_request_info *a, |
| union iwreq_data *wrqu, char *b) |
| { |
| |
| wrqu->mode = ieee->iw_mode; |
| return 0; |
| } |
| |
| int ieee80211_wx_set_rawtx(struct ieee80211_device *ieee, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, char *extra) |
| { |
| |
| int *parms = (int *)extra; |
| int enable = (parms[0] > 0); |
| short prev = ieee->raw_tx; |
| |
| down(&ieee->wx_sem); |
| |
| if(enable) |
| ieee->raw_tx = 1; |
| else |
| ieee->raw_tx = 0; |
| |
| printk(KERN_INFO"raw TX is %s\n", |
| ieee->raw_tx ? "enabled" : "disabled"); |
| |
| if(ieee->iw_mode == IW_MODE_MONITOR) |
| { |
| if(prev == 0 && ieee->raw_tx){ |
| if (ieee->data_hard_resume) |
| ieee->data_hard_resume(ieee->dev); |
| |
| netif_carrier_on(ieee->dev); |
| } |
| |
| if(prev && ieee->raw_tx == 1) |
| netif_carrier_off(ieee->dev); |
| } |
| |
| up(&ieee->wx_sem); |
| |
| return 0; |
| } |
| |
| int ieee80211_wx_get_name(struct ieee80211_device *ieee, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, char *extra) |
| { |
| strlcpy(wrqu->name, "802.11", IFNAMSIZ); |
| if(ieee->modulation & IEEE80211_CCK_MODULATION){ |
| strlcat(wrqu->name, "b", IFNAMSIZ); |
| if(ieee->modulation & IEEE80211_OFDM_MODULATION) |
| strlcat(wrqu->name, "/g", IFNAMSIZ); |
| }else if(ieee->modulation & IEEE80211_OFDM_MODULATION) |
| strlcat(wrqu->name, "g", IFNAMSIZ); |
| |
| if((ieee->state == IEEE80211_LINKED) || |
| (ieee->state == IEEE80211_LINKED_SCANNING)) |
| strlcat(wrqu->name," link", IFNAMSIZ); |
| else if(ieee->state != IEEE80211_NOLINK) |
| strlcat(wrqu->name," .....", IFNAMSIZ); |
| |
| |
| return 0; |
| } |
| |
| |
| /* this is mostly stolen from hostap */ |
| int ieee80211_wx_set_power(struct ieee80211_device *ieee, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, char *extra) |
| { |
| int ret = 0; |
| |
| if( |
| (!ieee->sta_wake_up) || |
| (!ieee->ps_request_tx_ack) || |
| (!ieee->enter_sleep_state) || |
| (!ieee->ps_is_queue_empty)){ |
| |
| printk("ERROR. PS mode tried to be use but driver missed a callback\n\n"); |
| |
| return -1; |
| } |
| |
| down(&ieee->wx_sem); |
| |
| if (wrqu->power.disabled){ |
| ieee->ps = IEEE80211_PS_DISABLED; |
| |
| goto exit; |
| } |
| switch (wrqu->power.flags & IW_POWER_MODE) { |
| case IW_POWER_UNICAST_R: |
| ieee->ps = IEEE80211_PS_UNICAST; |
| |
| break; |
| case IW_POWER_ALL_R: |
| ieee->ps = IEEE80211_PS_UNICAST | IEEE80211_PS_MBCAST; |
| break; |
| |
| case IW_POWER_ON: |
| ieee->ps = IEEE80211_PS_DISABLED; |
| break; |
| |
| default: |
| ret = -EINVAL; |
| goto exit; |
| } |
| |
| if (wrqu->power.flags & IW_POWER_TIMEOUT) { |
| |
| ieee->ps_timeout = wrqu->power.value / 1000; |
| printk("Timeout %d\n",ieee->ps_timeout); |
| } |
| |
| if (wrqu->power.flags & IW_POWER_PERIOD) { |
| |
| ret = -EOPNOTSUPP; |
| goto exit; |
| //wrq->value / 1024; |
| |
| } |
| exit: |
| up(&ieee->wx_sem); |
| return ret; |
| |
| } |
| |
| /* this is stolen from hostap */ |
| int ieee80211_wx_get_power(struct ieee80211_device *ieee, |
| struct iw_request_info *info, |
| union iwreq_data *wrqu, char *extra) |
| { |
| int ret =0; |
| |
| down(&ieee->wx_sem); |
| |
| if(ieee->ps == IEEE80211_PS_DISABLED){ |
| wrqu->power.disabled = 1; |
| goto exit; |
| } |
| |
| wrqu->power.disabled = 0; |
| |
| // if ((wrqu->power.flags & IW_POWER_TYPE) == IW_POWER_TIMEOUT) { |
| wrqu->power.flags = IW_POWER_TIMEOUT; |
| wrqu->power.value = ieee->ps_timeout * 1000; |
| // } else { |
| // ret = -EOPNOTSUPP; |
| // goto exit; |
| //wrqu->power.flags = IW_POWER_PERIOD; |
| //wrqu->power.value = ieee->current_network.dtim_period * |
| // ieee->current_network.beacon_interval * 1024; |
| // } |
| |
| |
| if (ieee->ps & IEEE80211_PS_MBCAST) |
| wrqu->power.flags |= IW_POWER_ALL_R; |
| else |
| wrqu->power.flags |= IW_POWER_UNICAST_R; |
| |
| exit: |
| up(&ieee->wx_sem); |
| return ret; |
| |
| } |