| /* |
| * Line6 Linux USB driver - 0.8.0 |
| * |
| * Copyright (C) 2004-2009 Markus Grabner (grabner@icg.tugraz.at) |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation, version 2. |
| * |
| */ |
| |
| #ifndef LINE6_CONTROL_H |
| #define LINE6_CONTROL_H |
| |
| |
| /** |
| List of PODxt Pro controls. |
| See Appendix C of the "PODxt (Pro) Pilot's Handbook" by Line6. |
| Comments after the number refer to the PODxt Pro firmware version required |
| for this feature. |
| */ |
| enum { |
| POD_tweak = 1, |
| POD_wah_position = 4, |
| |
| /* device: LINE6_BITS_PODXTALL */ |
| POD_compression_gain = 5, |
| |
| POD_vol_pedal_position = 7, |
| POD_compression_threshold = 9, |
| POD_pan = 10, |
| POD_amp_model_setup = 11, |
| POD_amp_model = 12, /* firmware: 2.0 */ |
| POD_drive = 13, |
| POD_bass = 14, |
| |
| /* device: LINE6_BITS_PODXTALL */ |
| POD_mid = 15, |
| |
| /* device: LINE6_BITS_BASSPODXTALL */ |
| POD_lowmid = 15, |
| |
| /* device: LINE6_BITS_PODXTALL */ |
| POD_treble = 16, |
| |
| /* device: LINE6_BITS_BASSPODXTALL */ |
| POD_highmid = 16, |
| |
| POD_chan_vol = 17, |
| |
| /* device: LINE6_BITS_PODXTALL */ |
| POD_reverb_mix = 18, |
| |
| POD_effect_setup = 19, |
| POD_band_1_frequency = 20, /* firmware: 2.0 */ |
| |
| /* device: LINE6_BITS_PODXTALL */ |
| POD_presence = 21, |
| |
| /* device: LINE6_BITS_BASSPODXTALL */ |
| POD_treble__bass = 21, |
| |
| POD_noise_gate_enable = 22, |
| POD_gate_threshold = 23, |
| POD_gate_decay_time = 24, |
| POD_stomp_enable = 25, |
| POD_comp_enable = 26, |
| POD_stomp_time = 27, |
| POD_delay_enable = 28, |
| POD_mod_param_1 = 29, |
| POD_delay_param_1 = 30, |
| POD_delay_param_1_note_value = 31, |
| |
| /* device: LINE6_BITS_BASSPODXTALL */ |
| POD_band_2_frequency__bass = 32, /* firmware: 2.0 */ |
| |
| POD_delay_param_2 = 33, |
| POD_delay_volume_mix = 34, |
| POD_delay_param_3 = 35, |
| |
| /* device: LINE6_BITS_PODXTALL */ |
| POD_reverb_enable = 36, |
| POD_reverb_type = 37, |
| POD_reverb_decay = 38, |
| POD_reverb_tone = 39, |
| POD_reverb_pre_delay = 40, |
| POD_reverb_pre_post = 41, |
| POD_band_2_frequency = 42, |
| |
| /* device: LINE6_BITS_BASSPODXTALL */ |
| POD_band_3_frequency__bass = 42, /* firmware: 2.0 */ |
| |
| POD_wah_enable = 43, |
| |
| /* device: LINE6_BITS_BASSPODXTALL */ |
| POD_modulation_lo_cut = 44, |
| POD_delay_reverb_lo_cut = 45, |
| |
| /* device: LINE6_BITS_PODXTALL */ |
| POD_volume_pedal_minimum = 46, /* firmware: 2.0 */ |
| |
| /* device: LINE6_BITS_BASSPODXTALL */ |
| POD_eq_pre_post = 46, /* firmware: 2.0 */ |
| |
| POD_volume_pre_post = 47, |
| |
| /* device: LINE6_BITS_BASSPODXTALL */ |
| POD_di_model = 48, |
| POD_di_delay = 49, |
| |
| POD_mod_enable = 50, |
| POD_mod_param_1_note_value = 51, |
| POD_mod_param_2 = 52, |
| POD_mod_param_3 = 53, |
| POD_mod_param_4 = 54, |
| |
| /* device: LINE6_BITS_BASSPODXTALL */ |
| POD_mod_param_5 = 55, |
| |
| POD_mod_volume_mix = 56, |
| POD_mod_pre_post = 57, |
| POD_modulation_model = 58, |
| |
| /* device: LINE6_BITS_PODXTALL */ |
| POD_band_3_frequency = 60, /* firmware: 2.0 */ |
| |
| /* device: LINE6_BITS_BASSPODXTALL */ |
| POD_band_4_frequency__bass = 60, /* firmware: 2.0 */ |
| |
| POD_mod_param_1_double_precision = 61, |
| POD_delay_param_1_double_precision = 62, |
| POD_eq_enable = 63, /* firmware: 2.0 */ |
| POD_tap = 64, |
| POD_volume_tweak_pedal_assign = 65, |
| |
| /* device: LINE6_BITS_BASSPODXTALL */ |
| POD_band_5_frequency = 68, /* firmware: 2.0 */ |
| |
| POD_tuner = 69, |
| POD_mic_selection = 70, |
| POD_cabinet_model = 71, |
| POD_stomp_model = 75, |
| POD_roomlevel = 76, |
| |
| /* device: LINE6_BITS_PODXTALL */ |
| POD_band_4_frequency = 77, /* firmware: 2.0 */ |
| |
| /* device: LINE6_BITS_BASSPODXTALL */ |
| POD_band_6_frequency = 77, /* firmware: 2.0 */ |
| |
| POD_stomp_param_1_note_value = 78, |
| POD_stomp_param_2 = 79, |
| POD_stomp_param_3 = 80, |
| POD_stomp_param_4 = 81, |
| POD_stomp_param_5 = 82, |
| POD_stomp_param_6 = 83, |
| |
| /* device: LINE6_BITS_LIVE */ |
| POD_amp_switch_select = 84, |
| |
| POD_delay_param_4 = 85, |
| POD_delay_param_5 = 86, |
| POD_delay_pre_post = 87, |
| |
| /* device: LINE6_BITS_PODXTALL */ |
| POD_delay_model = 88, |
| |
| /* device: LINE6_BITS_BASSPODXTALL */ |
| POD_delay_verb_model = 88, |
| |
| POD_tempo_msb = 89, |
| POD_tempo_lsb = 90, |
| POD_wah_model = 91, /* firmware: 3.0 */ |
| POD_bypass_volume = 105, /* firmware: 2.14 */ |
| |
| /* device: LINE6_BITS_PRO */ |
| POD_fx_loop_on_off = 107, |
| |
| POD_tweak_param_select = 108, |
| POD_amp1_engage = 111, |
| POD_band_1_gain = 114, /* firmware: 2.0 */ |
| |
| /* device: LINE6_BITS_BASSPODXTALL */ |
| POD_band_2_gain__bass = 115, /* firmware: 2.0 */ |
| |
| /* device: LINE6_BITS_PODXTALL */ |
| POD_band_2_gain = 116, /* firmware: 2.0 */ |
| |
| /* device: LINE6_BITS_BASSPODXTALL */ |
| POD_band_3_gain__bass = 116, /* firmware: 2.0 */ |
| |
| /* device: LINE6_BITS_PODXTALL */ |
| POD_band_3_gain = 117, /* firmware: 2.0 */ |
| |
| /* device: LINE6_BITS_BASSPODXTALL */ |
| POD_band_4_gain__bass = 117, /* firmware: 2.0 */ |
| POD_band_5_gain__bass = 118, /* firmware: 2.0 */ |
| |
| /* device: LINE6_BITS_PODXTALL */ |
| POD_band_4_gain = 119, /* firmware: 2.0 */ |
| |
| /* device: LINE6_BITS_BASSPODXTALL */ |
| POD_band_6_gain__bass = 119 /* firmware: 2.0 */ |
| }; |
| |
| /** |
| List of Variax workbench controls (dump). |
| */ |
| enum { |
| VARIAX_body = 3, |
| VARIAX_pickup1_enable = 4, /* 0: enabled, 1: disabled */ |
| VARIAX_pickup1_type = 8, |
| VARIAX_pickup1_position = 9, /* type: 24 bit float */ |
| VARIAX_pickup1_angle = 12, /* type: 24 bit float */ |
| VARIAX_pickup1_level = 15, /* type: 24 bit float */ |
| VARIAX_pickup2_enable = 18, /* 0: enabled, 1: disabled */ |
| VARIAX_pickup2_type = 22, |
| VARIAX_pickup2_position = 23, /* type: 24 bit float */ |
| VARIAX_pickup2_angle = 26, /* type: 24 bit float */ |
| VARIAX_pickup2_level = 29, /* type: 24 bit float */ |
| VARIAX_pickup_phase = 32, /* 0: in phase, |
| 1: out of phase */ |
| VARIAX_capacitance = 33, /* type: 24 bit float */ |
| VARIAX_tone_resistance = 36, /* type: 24 bit float */ |
| VARIAX_volume_resistance = 39, /* type: 24 bit float */ |
| VARIAX_taper = 42, /* 0: Linear, 1: Audio */ |
| VARIAX_tone_dump = 43, /* type: 24 bit float */ |
| VARIAX_save_tone = 46, |
| VARIAX_volume_dump = 47, /* type: 24 bit float */ |
| VARIAX_tuning_enable = 50, |
| VARIAX_tuning6 = 51, |
| VARIAX_tuning5 = 52, |
| VARIAX_tuning4 = 53, |
| VARIAX_tuning3 = 54, |
| VARIAX_tuning2 = 55, |
| VARIAX_tuning1 = 56, |
| VARIAX_detune6 = 57, /* type: 24 bit float */ |
| VARIAX_detune5 = 60, /* type: 24 bit float */ |
| VARIAX_detune4 = 63, /* type: 24 bit float */ |
| VARIAX_detune3 = 66, /* type: 24 bit float */ |
| VARIAX_detune2 = 69, /* type: 24 bit float */ |
| VARIAX_detune1 = 72, /* type: 24 bit float */ |
| VARIAX_mix6 = 75, /* type: 24 bit float */ |
| VARIAX_mix5 = 78, /* type: 24 bit float */ |
| VARIAX_mix4 = 81, /* type: 24 bit float */ |
| VARIAX_mix3 = 84, /* type: 24 bit float */ |
| VARIAX_mix2 = 87, /* type: 24 bit float */ |
| VARIAX_mix1 = 90, /* type: 24 bit float */ |
| VARIAX_pickup_wiring = 96 /* 0: parallel, 1: series */ |
| }; |
| |
| /** |
| List of Variax workbench controls (MIDI). |
| */ |
| enum { |
| VARIAXMIDI_volume = 7, |
| VARIAXMIDI_tone = 79, |
| }; |
| |
| |
| extern int pod_create_files(int firmware, int type, struct device *dev); |
| extern void pod_remove_files(int firmware, int type, struct device *dev); |
| extern int variax_create_files(int firmware, int type, struct device *dev); |
| extern void variax_remove_files(int firmware, int type, struct device *dev); |
| |
| |
| #endif |