| /* |
| * Copyright (C) 2009 Texas Instruments. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/gpio.h> |
| #include <linux/module.h> |
| #include <linux/delay.h> |
| #include <linux/platform_device.h> |
| #include <linux/err.h> |
| #include <linux/clk.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/spi/spi.h> |
| #include <linux/spi/spi_bitbang.h> |
| #include <linux/slab.h> |
| |
| #include <mach/spi.h> |
| #include <mach/edma.h> |
| |
| #define SPI_NO_RESOURCE ((resource_size_t)-1) |
| |
| #define SPI_MAX_CHIPSELECT 2 |
| |
| #define CS_DEFAULT 0xFF |
| |
| #define SPI_BUFSIZ (SMP_CACHE_BYTES + 1) |
| #define DAVINCI_DMA_DATA_TYPE_S8 0x01 |
| #define DAVINCI_DMA_DATA_TYPE_S16 0x02 |
| #define DAVINCI_DMA_DATA_TYPE_S32 0x04 |
| |
| #define SPIFMT_PHASE_MASK BIT(16) |
| #define SPIFMT_POLARITY_MASK BIT(17) |
| #define SPIFMT_DISTIMER_MASK BIT(18) |
| #define SPIFMT_SHIFTDIR_MASK BIT(20) |
| #define SPIFMT_WAITENA_MASK BIT(21) |
| #define SPIFMT_PARITYENA_MASK BIT(22) |
| #define SPIFMT_ODD_PARITY_MASK BIT(23) |
| #define SPIFMT_WDELAY_MASK 0x3f000000u |
| #define SPIFMT_WDELAY_SHIFT 24 |
| #define SPIFMT_CHARLEN_MASK 0x0000001Fu |
| |
| /* SPIGCR1 */ |
| #define SPIGCR1_SPIENA_MASK 0x01000000u |
| |
| /* SPIPC0 */ |
| #define SPIPC0_DIFUN_MASK BIT(11) /* MISO */ |
| #define SPIPC0_DOFUN_MASK BIT(10) /* MOSI */ |
| #define SPIPC0_CLKFUN_MASK BIT(9) /* CLK */ |
| #define SPIPC0_SPIENA_MASK BIT(8) /* nREADY */ |
| #define SPIPC0_EN1FUN_MASK BIT(1) |
| #define SPIPC0_EN0FUN_MASK BIT(0) |
| |
| #define SPIINT_MASKALL 0x0101035F |
| #define SPI_INTLVL_1 0x000001FFu |
| #define SPI_INTLVL_0 0x00000000u |
| |
| /* SPIDAT1 */ |
| #define SPIDAT1_CSHOLD_SHIFT 28 |
| #define SPIDAT1_CSNR_SHIFT 16 |
| #define SPIGCR1_CLKMOD_MASK BIT(1) |
| #define SPIGCR1_MASTER_MASK BIT(0) |
| #define SPIGCR1_LOOPBACK_MASK BIT(16) |
| |
| /* SPIBUF */ |
| #define SPIBUF_TXFULL_MASK BIT(29) |
| #define SPIBUF_RXEMPTY_MASK BIT(31) |
| |
| /* Error Masks */ |
| #define SPIFLG_DLEN_ERR_MASK BIT(0) |
| #define SPIFLG_TIMEOUT_MASK BIT(1) |
| #define SPIFLG_PARERR_MASK BIT(2) |
| #define SPIFLG_DESYNC_MASK BIT(3) |
| #define SPIFLG_BITERR_MASK BIT(4) |
| #define SPIFLG_OVRRUN_MASK BIT(6) |
| #define SPIFLG_RX_INTR_MASK BIT(8) |
| #define SPIFLG_TX_INTR_MASK BIT(9) |
| #define SPIFLG_BUF_INIT_ACTIVE_MASK BIT(24) |
| #define SPIFLG_MASK (SPIFLG_DLEN_ERR_MASK \ |
| | SPIFLG_TIMEOUT_MASK | SPIFLG_PARERR_MASK \ |
| | SPIFLG_DESYNC_MASK | SPIFLG_BITERR_MASK \ |
| | SPIFLG_OVRRUN_MASK | SPIFLG_RX_INTR_MASK \ |
| | SPIFLG_TX_INTR_MASK \ |
| | SPIFLG_BUF_INIT_ACTIVE_MASK) |
| |
| #define SPIINT_DLEN_ERR_INTR BIT(0) |
| #define SPIINT_TIMEOUT_INTR BIT(1) |
| #define SPIINT_PARERR_INTR BIT(2) |
| #define SPIINT_DESYNC_INTR BIT(3) |
| #define SPIINT_BITERR_INTR BIT(4) |
| #define SPIINT_OVRRUN_INTR BIT(6) |
| #define SPIINT_RX_INTR BIT(8) |
| #define SPIINT_TX_INTR BIT(9) |
| #define SPIINT_DMA_REQ_EN BIT(16) |
| #define SPIINT_ENABLE_HIGHZ BIT(24) |
| |
| #define SPI_T2CDELAY_SHIFT 16 |
| #define SPI_C2TDELAY_SHIFT 24 |
| |
| /* SPI Controller registers */ |
| #define SPIGCR0 0x00 |
| #define SPIGCR1 0x04 |
| #define SPIINT 0x08 |
| #define SPILVL 0x0c |
| #define SPIFLG 0x10 |
| #define SPIPC0 0x14 |
| #define SPIPC1 0x18 |
| #define SPIPC2 0x1c |
| #define SPIPC3 0x20 |
| #define SPIPC4 0x24 |
| #define SPIPC5 0x28 |
| #define SPIPC6 0x2c |
| #define SPIPC7 0x30 |
| #define SPIPC8 0x34 |
| #define SPIDAT0 0x38 |
| #define SPIDAT1 0x3c |
| #define SPIBUF 0x40 |
| #define SPIEMU 0x44 |
| #define SPIDELAY 0x48 |
| #define SPIDEF 0x4c |
| #define SPIFMT0 0x50 |
| #define SPIFMT1 0x54 |
| #define SPIFMT2 0x58 |
| #define SPIFMT3 0x5c |
| #define TGINTVEC0 0x60 |
| #define TGINTVEC1 0x64 |
| |
| struct davinci_spi_slave { |
| u32 cmd_to_write; |
| u32 clk_ctrl_to_write; |
| u32 bytes_per_word; |
| u8 active_cs; |
| }; |
| |
| /* We have 2 DMA channels per CS, one for RX and one for TX */ |
| struct davinci_spi_dma { |
| int dma_tx_channel; |
| int dma_rx_channel; |
| int dma_tx_sync_dev; |
| int dma_rx_sync_dev; |
| enum dma_event_q eventq; |
| |
| struct completion dma_tx_completion; |
| struct completion dma_rx_completion; |
| }; |
| |
| /* SPI Controller driver's private data. */ |
| struct davinci_spi { |
| struct spi_bitbang bitbang; |
| struct clk *clk; |
| |
| u8 version; |
| resource_size_t pbase; |
| void __iomem *base; |
| size_t region_size; |
| u32 irq; |
| struct completion done; |
| |
| const void *tx; |
| void *rx; |
| u8 *tmp_buf; |
| int count; |
| struct davinci_spi_dma *dma_channels; |
| struct davinci_spi_platform_data *pdata; |
| |
| void (*get_rx)(u32 rx_data, struct davinci_spi *); |
| u32 (*get_tx)(struct davinci_spi *); |
| |
| struct davinci_spi_slave slave[SPI_MAX_CHIPSELECT]; |
| }; |
| |
| static unsigned use_dma; |
| |
| static void davinci_spi_rx_buf_u8(u32 data, struct davinci_spi *davinci_spi) |
| { |
| u8 *rx = davinci_spi->rx; |
| |
| *rx++ = (u8)data; |
| davinci_spi->rx = rx; |
| } |
| |
| static void davinci_spi_rx_buf_u16(u32 data, struct davinci_spi *davinci_spi) |
| { |
| u16 *rx = davinci_spi->rx; |
| |
| *rx++ = (u16)data; |
| davinci_spi->rx = rx; |
| } |
| |
| static u32 davinci_spi_tx_buf_u8(struct davinci_spi *davinci_spi) |
| { |
| u32 data; |
| const u8 *tx = davinci_spi->tx; |
| |
| data = *tx++; |
| davinci_spi->tx = tx; |
| return data; |
| } |
| |
| static u32 davinci_spi_tx_buf_u16(struct davinci_spi *davinci_spi) |
| { |
| u32 data; |
| const u16 *tx = davinci_spi->tx; |
| |
| data = *tx++; |
| davinci_spi->tx = tx; |
| return data; |
| } |
| |
| static inline void set_io_bits(void __iomem *addr, u32 bits) |
| { |
| u32 v = ioread32(addr); |
| |
| v |= bits; |
| iowrite32(v, addr); |
| } |
| |
| static inline void clear_io_bits(void __iomem *addr, u32 bits) |
| { |
| u32 v = ioread32(addr); |
| |
| v &= ~bits; |
| iowrite32(v, addr); |
| } |
| |
| static inline void set_fmt_bits(void __iomem *addr, u32 bits, int cs_num) |
| { |
| set_io_bits(addr + SPIFMT0 + (0x4 * cs_num), bits); |
| } |
| |
| static inline void clear_fmt_bits(void __iomem *addr, u32 bits, int cs_num) |
| { |
| clear_io_bits(addr + SPIFMT0 + (0x4 * cs_num), bits); |
| } |
| |
| static void davinci_spi_set_dma_req(const struct spi_device *spi, int enable) |
| { |
| struct davinci_spi *davinci_spi = spi_master_get_devdata(spi->master); |
| |
| if (enable) |
| set_io_bits(davinci_spi->base + SPIINT, SPIINT_DMA_REQ_EN); |
| else |
| clear_io_bits(davinci_spi->base + SPIINT, SPIINT_DMA_REQ_EN); |
| } |
| |
| /* |
| * Interface to control the chip select signal |
| */ |
| static void davinci_spi_chipselect(struct spi_device *spi, int value) |
| { |
| struct davinci_spi *davinci_spi; |
| struct davinci_spi_platform_data *pdata; |
| u32 data1_reg_val = 0; |
| |
| davinci_spi = spi_master_get_devdata(spi->master); |
| pdata = davinci_spi->pdata; |
| |
| /* |
| * Board specific chip select logic decides the polarity and cs |
| * line for the controller |
| */ |
| if (value == BITBANG_CS_INACTIVE) { |
| set_io_bits(davinci_spi->base + SPIDEF, CS_DEFAULT); |
| |
| data1_reg_val |= CS_DEFAULT << SPIDAT1_CSNR_SHIFT; |
| iowrite32(data1_reg_val, davinci_spi->base + SPIDAT1); |
| |
| while ((ioread32(davinci_spi->base + SPIBUF) |
| & SPIBUF_RXEMPTY_MASK) == 0) |
| cpu_relax(); |
| } |
| } |
| |
| /** |
| * davinci_spi_setup_transfer - This functions will determine transfer method |
| * @spi: spi device on which data transfer to be done |
| * @t: spi transfer in which transfer info is filled |
| * |
| * This function determines data transfer method (8/16/32 bit transfer). |
| * It will also set the SPI Clock Control register according to |
| * SPI slave device freq. |
| */ |
| static int davinci_spi_setup_transfer(struct spi_device *spi, |
| struct spi_transfer *t) |
| { |
| |
| struct davinci_spi *davinci_spi; |
| struct davinci_spi_platform_data *pdata; |
| u8 bits_per_word = 0; |
| u32 hz = 0, prescale = 0, clkspeed; |
| |
| davinci_spi = spi_master_get_devdata(spi->master); |
| pdata = davinci_spi->pdata; |
| |
| if (t) { |
| bits_per_word = t->bits_per_word; |
| hz = t->speed_hz; |
| } |
| |
| /* if bits_per_word is not set then set it default */ |
| if (!bits_per_word) |
| bits_per_word = spi->bits_per_word; |
| |
| /* |
| * Assign function pointer to appropriate transfer method |
| * 8bit, 16bit or 32bit transfer |
| */ |
| if (bits_per_word <= 8 && bits_per_word >= 2) { |
| davinci_spi->get_rx = davinci_spi_rx_buf_u8; |
| davinci_spi->get_tx = davinci_spi_tx_buf_u8; |
| davinci_spi->slave[spi->chip_select].bytes_per_word = 1; |
| } else if (bits_per_word <= 16 && bits_per_word >= 2) { |
| davinci_spi->get_rx = davinci_spi_rx_buf_u16; |
| davinci_spi->get_tx = davinci_spi_tx_buf_u16; |
| davinci_spi->slave[spi->chip_select].bytes_per_word = 2; |
| } else |
| return -EINVAL; |
| |
| if (!hz) |
| hz = spi->max_speed_hz; |
| |
| clear_fmt_bits(davinci_spi->base, SPIFMT_CHARLEN_MASK, |
| spi->chip_select); |
| set_fmt_bits(davinci_spi->base, bits_per_word & 0x1f, |
| spi->chip_select); |
| |
| clkspeed = clk_get_rate(davinci_spi->clk); |
| if (hz > clkspeed / 2) |
| prescale = 1 << 8; |
| if (hz < clkspeed / 256) |
| prescale = 255 << 8; |
| if (!prescale) |
| prescale = ((clkspeed / hz - 1) << 8) & 0x0000ff00; |
| |
| clear_fmt_bits(davinci_spi->base, 0x0000ff00, spi->chip_select); |
| set_fmt_bits(davinci_spi->base, prescale, spi->chip_select); |
| |
| return 0; |
| } |
| |
| static void davinci_spi_dma_rx_callback(unsigned lch, u16 ch_status, void *data) |
| { |
| struct spi_device *spi = (struct spi_device *)data; |
| struct davinci_spi *davinci_spi; |
| struct davinci_spi_dma *davinci_spi_dma; |
| struct davinci_spi_platform_data *pdata; |
| |
| davinci_spi = spi_master_get_devdata(spi->master); |
| davinci_spi_dma = &(davinci_spi->dma_channels[spi->chip_select]); |
| pdata = davinci_spi->pdata; |
| |
| if (ch_status == DMA_COMPLETE) |
| edma_stop(davinci_spi_dma->dma_rx_channel); |
| else |
| edma_clean_channel(davinci_spi_dma->dma_rx_channel); |
| |
| complete(&davinci_spi_dma->dma_rx_completion); |
| /* We must disable the DMA RX request */ |
| davinci_spi_set_dma_req(spi, 0); |
| } |
| |
| static void davinci_spi_dma_tx_callback(unsigned lch, u16 ch_status, void *data) |
| { |
| struct spi_device *spi = (struct spi_device *)data; |
| struct davinci_spi *davinci_spi; |
| struct davinci_spi_dma *davinci_spi_dma; |
| struct davinci_spi_platform_data *pdata; |
| |
| davinci_spi = spi_master_get_devdata(spi->master); |
| davinci_spi_dma = &(davinci_spi->dma_channels[spi->chip_select]); |
| pdata = davinci_spi->pdata; |
| |
| if (ch_status == DMA_COMPLETE) |
| edma_stop(davinci_spi_dma->dma_tx_channel); |
| else |
| edma_clean_channel(davinci_spi_dma->dma_tx_channel); |
| |
| complete(&davinci_spi_dma->dma_tx_completion); |
| /* We must disable the DMA TX request */ |
| davinci_spi_set_dma_req(spi, 0); |
| } |
| |
| static int davinci_spi_request_dma(struct spi_device *spi) |
| { |
| struct davinci_spi *davinci_spi; |
| struct davinci_spi_dma *davinci_spi_dma; |
| struct davinci_spi_platform_data *pdata; |
| struct device *sdev; |
| int r; |
| |
| davinci_spi = spi_master_get_devdata(spi->master); |
| davinci_spi_dma = &davinci_spi->dma_channels[spi->chip_select]; |
| pdata = davinci_spi->pdata; |
| sdev = davinci_spi->bitbang.master->dev.parent; |
| |
| r = edma_alloc_channel(davinci_spi_dma->dma_rx_sync_dev, |
| davinci_spi_dma_rx_callback, spi, |
| davinci_spi_dma->eventq); |
| if (r < 0) { |
| dev_dbg(sdev, "Unable to request DMA channel for SPI RX\n"); |
| return -EAGAIN; |
| } |
| davinci_spi_dma->dma_rx_channel = r; |
| r = edma_alloc_channel(davinci_spi_dma->dma_tx_sync_dev, |
| davinci_spi_dma_tx_callback, spi, |
| davinci_spi_dma->eventq); |
| if (r < 0) { |
| edma_free_channel(davinci_spi_dma->dma_rx_channel); |
| davinci_spi_dma->dma_rx_channel = -1; |
| dev_dbg(sdev, "Unable to request DMA channel for SPI TX\n"); |
| return -EAGAIN; |
| } |
| davinci_spi_dma->dma_tx_channel = r; |
| |
| return 0; |
| } |
| |
| /** |
| * davinci_spi_setup - This functions will set default transfer method |
| * @spi: spi device on which data transfer to be done |
| * |
| * This functions sets the default transfer method. |
| */ |
| |
| static int davinci_spi_setup(struct spi_device *spi) |
| { |
| int retval; |
| struct davinci_spi *davinci_spi; |
| struct davinci_spi_dma *davinci_spi_dma; |
| struct device *sdev; |
| |
| davinci_spi = spi_master_get_devdata(spi->master); |
| sdev = davinci_spi->bitbang.master->dev.parent; |
| |
| /* if bits per word length is zero then set it default 8 */ |
| if (!spi->bits_per_word) |
| spi->bits_per_word = 8; |
| |
| davinci_spi->slave[spi->chip_select].cmd_to_write = 0; |
| |
| if (use_dma && davinci_spi->dma_channels) { |
| davinci_spi_dma = &davinci_spi->dma_channels[spi->chip_select]; |
| |
| if ((davinci_spi_dma->dma_rx_channel == -1) |
| || (davinci_spi_dma->dma_tx_channel == -1)) { |
| retval = davinci_spi_request_dma(spi); |
| if (retval < 0) |
| return retval; |
| } |
| } |
| |
| /* |
| * SPI in DaVinci and DA8xx operate between |
| * 600 KHz and 50 MHz |
| */ |
| if (spi->max_speed_hz < 600000 || spi->max_speed_hz > 50000000) { |
| dev_dbg(sdev, "Operating frequency is not in acceptable " |
| "range\n"); |
| return -EINVAL; |
| } |
| |
| /* |
| * Set up SPIFMTn register, unique to this chipselect. |
| * |
| * NOTE: we could do all of these with one write. Also, some |
| * of the "version 2" features are found in chips that don't |
| * support all of them... |
| */ |
| if (spi->mode & SPI_LSB_FIRST) |
| set_fmt_bits(davinci_spi->base, SPIFMT_SHIFTDIR_MASK, |
| spi->chip_select); |
| else |
| clear_fmt_bits(davinci_spi->base, SPIFMT_SHIFTDIR_MASK, |
| spi->chip_select); |
| |
| if (spi->mode & SPI_CPOL) |
| set_fmt_bits(davinci_spi->base, SPIFMT_POLARITY_MASK, |
| spi->chip_select); |
| else |
| clear_fmt_bits(davinci_spi->base, SPIFMT_POLARITY_MASK, |
| spi->chip_select); |
| |
| if (!(spi->mode & SPI_CPHA)) |
| set_fmt_bits(davinci_spi->base, SPIFMT_PHASE_MASK, |
| spi->chip_select); |
| else |
| clear_fmt_bits(davinci_spi->base, SPIFMT_PHASE_MASK, |
| spi->chip_select); |
| |
| /* |
| * Version 1 hardware supports two basic SPI modes: |
| * - Standard SPI mode uses 4 pins, with chipselect |
| * - 3 pin SPI is a 4 pin variant without CS (SPI_NO_CS) |
| * (distinct from SPI_3WIRE, with just one data wire; |
| * or similar variants without MOSI or without MISO) |
| * |
| * Version 2 hardware supports an optional handshaking signal, |
| * so it can support two more modes: |
| * - 5 pin SPI variant is standard SPI plus SPI_READY |
| * - 4 pin with enable is (SPI_READY | SPI_NO_CS) |
| */ |
| |
| if (davinci_spi->version == SPI_VERSION_2) { |
| clear_fmt_bits(davinci_spi->base, SPIFMT_WDELAY_MASK, |
| spi->chip_select); |
| set_fmt_bits(davinci_spi->base, |
| (davinci_spi->pdata->wdelay |
| << SPIFMT_WDELAY_SHIFT) |
| & SPIFMT_WDELAY_MASK, |
| spi->chip_select); |
| |
| if (davinci_spi->pdata->odd_parity) |
| set_fmt_bits(davinci_spi->base, |
| SPIFMT_ODD_PARITY_MASK, |
| spi->chip_select); |
| else |
| clear_fmt_bits(davinci_spi->base, |
| SPIFMT_ODD_PARITY_MASK, |
| spi->chip_select); |
| |
| if (davinci_spi->pdata->parity_enable) |
| set_fmt_bits(davinci_spi->base, |
| SPIFMT_PARITYENA_MASK, |
| spi->chip_select); |
| else |
| clear_fmt_bits(davinci_spi->base, |
| SPIFMT_PARITYENA_MASK, |
| spi->chip_select); |
| |
| if (davinci_spi->pdata->wait_enable) |
| set_fmt_bits(davinci_spi->base, |
| SPIFMT_WAITENA_MASK, |
| spi->chip_select); |
| else |
| clear_fmt_bits(davinci_spi->base, |
| SPIFMT_WAITENA_MASK, |
| spi->chip_select); |
| |
| if (davinci_spi->pdata->timer_disable) |
| set_fmt_bits(davinci_spi->base, |
| SPIFMT_DISTIMER_MASK, |
| spi->chip_select); |
| else |
| clear_fmt_bits(davinci_spi->base, |
| SPIFMT_DISTIMER_MASK, |
| spi->chip_select); |
| } |
| |
| retval = davinci_spi_setup_transfer(spi, NULL); |
| |
| return retval; |
| } |
| |
| static void davinci_spi_cleanup(struct spi_device *spi) |
| { |
| struct davinci_spi *davinci_spi = spi_master_get_devdata(spi->master); |
| struct davinci_spi_dma *davinci_spi_dma; |
| |
| davinci_spi_dma = &davinci_spi->dma_channels[spi->chip_select]; |
| |
| if (use_dma && davinci_spi->dma_channels) { |
| davinci_spi_dma = &davinci_spi->dma_channels[spi->chip_select]; |
| |
| if ((davinci_spi_dma->dma_rx_channel != -1) |
| && (davinci_spi_dma->dma_tx_channel != -1)) { |
| edma_free_channel(davinci_spi_dma->dma_tx_channel); |
| edma_free_channel(davinci_spi_dma->dma_rx_channel); |
| } |
| } |
| } |
| |
| static int davinci_spi_bufs_prep(struct spi_device *spi, |
| struct davinci_spi *davinci_spi) |
| { |
| int op_mode = 0; |
| |
| /* |
| * REVISIT unless devices disagree about SPI_LOOP or |
| * SPI_READY (SPI_NO_CS only allows one device!), this |
| * should not need to be done before each message... |
| * optimize for both flags staying cleared. |
| */ |
| |
| op_mode = SPIPC0_DIFUN_MASK |
| | SPIPC0_DOFUN_MASK |
| | SPIPC0_CLKFUN_MASK; |
| if (!(spi->mode & SPI_NO_CS)) |
| op_mode |= 1 << spi->chip_select; |
| if (spi->mode & SPI_READY) |
| op_mode |= SPIPC0_SPIENA_MASK; |
| |
| iowrite32(op_mode, davinci_spi->base + SPIPC0); |
| |
| if (spi->mode & SPI_LOOP) |
| set_io_bits(davinci_spi->base + SPIGCR1, |
| SPIGCR1_LOOPBACK_MASK); |
| else |
| clear_io_bits(davinci_spi->base + SPIGCR1, |
| SPIGCR1_LOOPBACK_MASK); |
| |
| return 0; |
| } |
| |
| static int davinci_spi_check_error(struct davinci_spi *davinci_spi, |
| int int_status) |
| { |
| struct device *sdev = davinci_spi->bitbang.master->dev.parent; |
| |
| if (int_status & SPIFLG_TIMEOUT_MASK) { |
| dev_dbg(sdev, "SPI Time-out Error\n"); |
| return -ETIMEDOUT; |
| } |
| if (int_status & SPIFLG_DESYNC_MASK) { |
| dev_dbg(sdev, "SPI Desynchronization Error\n"); |
| return -EIO; |
| } |
| if (int_status & SPIFLG_BITERR_MASK) { |
| dev_dbg(sdev, "SPI Bit error\n"); |
| return -EIO; |
| } |
| |
| if (davinci_spi->version == SPI_VERSION_2) { |
| if (int_status & SPIFLG_DLEN_ERR_MASK) { |
| dev_dbg(sdev, "SPI Data Length Error\n"); |
| return -EIO; |
| } |
| if (int_status & SPIFLG_PARERR_MASK) { |
| dev_dbg(sdev, "SPI Parity Error\n"); |
| return -EIO; |
| } |
| if (int_status & SPIFLG_OVRRUN_MASK) { |
| dev_dbg(sdev, "SPI Data Overrun error\n"); |
| return -EIO; |
| } |
| if (int_status & SPIFLG_TX_INTR_MASK) { |
| dev_dbg(sdev, "SPI TX intr bit set\n"); |
| return -EIO; |
| } |
| if (int_status & SPIFLG_BUF_INIT_ACTIVE_MASK) { |
| dev_dbg(sdev, "SPI Buffer Init Active\n"); |
| return -EBUSY; |
| } |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * davinci_spi_bufs - functions which will handle transfer data |
| * @spi: spi device on which data transfer to be done |
| * @t: spi transfer in which transfer info is filled |
| * |
| * This function will put data to be transferred into data register |
| * of SPI controller and then wait until the completion will be marked |
| * by the IRQ Handler. |
| */ |
| static int davinci_spi_bufs_pio(struct spi_device *spi, struct spi_transfer *t) |
| { |
| struct davinci_spi *davinci_spi; |
| int int_status, count, ret; |
| u8 conv, tmp; |
| u32 tx_data, data1_reg_val; |
| u32 buf_val, flg_val; |
| struct davinci_spi_platform_data *pdata; |
| |
| davinci_spi = spi_master_get_devdata(spi->master); |
| pdata = davinci_spi->pdata; |
| |
| davinci_spi->tx = t->tx_buf; |
| davinci_spi->rx = t->rx_buf; |
| |
| /* convert len to words based on bits_per_word */ |
| conv = davinci_spi->slave[spi->chip_select].bytes_per_word; |
| davinci_spi->count = t->len / conv; |
| |
| INIT_COMPLETION(davinci_spi->done); |
| |
| ret = davinci_spi_bufs_prep(spi, davinci_spi); |
| if (ret) |
| return ret; |
| |
| /* Enable SPI */ |
| set_io_bits(davinci_spi->base + SPIGCR1, SPIGCR1_SPIENA_MASK); |
| |
| iowrite32(0 | (pdata->c2tdelay << SPI_C2TDELAY_SHIFT) | |
| (pdata->t2cdelay << SPI_T2CDELAY_SHIFT), |
| davinci_spi->base + SPIDELAY); |
| |
| count = davinci_spi->count; |
| data1_reg_val = pdata->cs_hold << SPIDAT1_CSHOLD_SHIFT; |
| tmp = ~(0x1 << spi->chip_select); |
| |
| clear_io_bits(davinci_spi->base + SPIDEF, ~tmp); |
| |
| data1_reg_val |= tmp << SPIDAT1_CSNR_SHIFT; |
| |
| while ((ioread32(davinci_spi->base + SPIBUF) |
| & SPIBUF_RXEMPTY_MASK) == 0) |
| cpu_relax(); |
| |
| /* Determine the command to execute READ or WRITE */ |
| if (t->tx_buf) { |
| clear_io_bits(davinci_spi->base + SPIINT, SPIINT_MASKALL); |
| |
| while (1) { |
| tx_data = davinci_spi->get_tx(davinci_spi); |
| |
| data1_reg_val &= ~(0xFFFF); |
| data1_reg_val |= (0xFFFF & tx_data); |
| |
| buf_val = ioread32(davinci_spi->base + SPIBUF); |
| if ((buf_val & SPIBUF_TXFULL_MASK) == 0) { |
| iowrite32(data1_reg_val, |
| davinci_spi->base + SPIDAT1); |
| |
| count--; |
| } |
| while (ioread32(davinci_spi->base + SPIBUF) |
| & SPIBUF_RXEMPTY_MASK) |
| cpu_relax(); |
| |
| /* getting the returned byte */ |
| if (t->rx_buf) { |
| buf_val = ioread32(davinci_spi->base + SPIBUF); |
| davinci_spi->get_rx(buf_val, davinci_spi); |
| } |
| if (count <= 0) |
| break; |
| } |
| } else { |
| if (pdata->poll_mode) { |
| while (1) { |
| /* keeps the serial clock going */ |
| if ((ioread32(davinci_spi->base + SPIBUF) |
| & SPIBUF_TXFULL_MASK) == 0) |
| iowrite32(data1_reg_val, |
| davinci_spi->base + SPIDAT1); |
| |
| while (ioread32(davinci_spi->base + SPIBUF) & |
| SPIBUF_RXEMPTY_MASK) |
| cpu_relax(); |
| |
| flg_val = ioread32(davinci_spi->base + SPIFLG); |
| buf_val = ioread32(davinci_spi->base + SPIBUF); |
| |
| davinci_spi->get_rx(buf_val, davinci_spi); |
| |
| count--; |
| if (count <= 0) |
| break; |
| } |
| } else { /* Receive in Interrupt mode */ |
| int i; |
| |
| for (i = 0; i < davinci_spi->count; i++) { |
| set_io_bits(davinci_spi->base + SPIINT, |
| SPIINT_BITERR_INTR |
| | SPIINT_OVRRUN_INTR |
| | SPIINT_RX_INTR); |
| |
| iowrite32(data1_reg_val, |
| davinci_spi->base + SPIDAT1); |
| |
| while (ioread32(davinci_spi->base + SPIINT) & |
| SPIINT_RX_INTR) |
| cpu_relax(); |
| } |
| iowrite32((data1_reg_val & 0x0ffcffff), |
| davinci_spi->base + SPIDAT1); |
| } |
| } |
| |
| /* |
| * Check for bit error, desync error,parity error,timeout error and |
| * receive overflow errors |
| */ |
| int_status = ioread32(davinci_spi->base + SPIFLG); |
| |
| ret = davinci_spi_check_error(davinci_spi, int_status); |
| if (ret != 0) |
| return ret; |
| |
| /* SPI Framework maintains the count only in bytes so convert back */ |
| davinci_spi->count *= conv; |
| |
| return t->len; |
| } |
| |
| #define DAVINCI_DMA_DATA_TYPE_S8 0x01 |
| #define DAVINCI_DMA_DATA_TYPE_S16 0x02 |
| #define DAVINCI_DMA_DATA_TYPE_S32 0x04 |
| |
| static int davinci_spi_bufs_dma(struct spi_device *spi, struct spi_transfer *t) |
| { |
| struct davinci_spi *davinci_spi; |
| int int_status = 0; |
| int count, temp_count; |
| u8 conv = 1; |
| u8 tmp; |
| u32 data1_reg_val; |
| struct davinci_spi_dma *davinci_spi_dma; |
| int word_len, data_type, ret; |
| unsigned long tx_reg, rx_reg; |
| struct davinci_spi_platform_data *pdata; |
| struct device *sdev; |
| |
| davinci_spi = spi_master_get_devdata(spi->master); |
| pdata = davinci_spi->pdata; |
| sdev = davinci_spi->bitbang.master->dev.parent; |
| |
| davinci_spi_dma = &davinci_spi->dma_channels[spi->chip_select]; |
| |
| tx_reg = (unsigned long)davinci_spi->pbase + SPIDAT1; |
| rx_reg = (unsigned long)davinci_spi->pbase + SPIBUF; |
| |
| davinci_spi->tx = t->tx_buf; |
| davinci_spi->rx = t->rx_buf; |
| |
| /* convert len to words based on bits_per_word */ |
| conv = davinci_spi->slave[spi->chip_select].bytes_per_word; |
| davinci_spi->count = t->len / conv; |
| |
| INIT_COMPLETION(davinci_spi->done); |
| |
| init_completion(&davinci_spi_dma->dma_rx_completion); |
| init_completion(&davinci_spi_dma->dma_tx_completion); |
| |
| word_len = conv * 8; |
| |
| if (word_len <= 8) |
| data_type = DAVINCI_DMA_DATA_TYPE_S8; |
| else if (word_len <= 16) |
| data_type = DAVINCI_DMA_DATA_TYPE_S16; |
| else if (word_len <= 32) |
| data_type = DAVINCI_DMA_DATA_TYPE_S32; |
| else |
| return -EINVAL; |
| |
| ret = davinci_spi_bufs_prep(spi, davinci_spi); |
| if (ret) |
| return ret; |
| |
| /* Put delay val if required */ |
| iowrite32(0 | (pdata->c2tdelay << SPI_C2TDELAY_SHIFT) | |
| (pdata->t2cdelay << SPI_T2CDELAY_SHIFT), |
| davinci_spi->base + SPIDELAY); |
| |
| count = davinci_spi->count; /* the number of elements */ |
| data1_reg_val = pdata->cs_hold << SPIDAT1_CSHOLD_SHIFT; |
| |
| /* CS default = 0xFF */ |
| tmp = ~(0x1 << spi->chip_select); |
| |
| clear_io_bits(davinci_spi->base + SPIDEF, ~tmp); |
| |
| data1_reg_val |= tmp << SPIDAT1_CSNR_SHIFT; |
| |
| /* disable all interrupts for dma transfers */ |
| clear_io_bits(davinci_spi->base + SPIINT, SPIINT_MASKALL); |
| /* Disable SPI to write configuration bits in SPIDAT */ |
| clear_io_bits(davinci_spi->base + SPIGCR1, SPIGCR1_SPIENA_MASK); |
| iowrite32(data1_reg_val, davinci_spi->base + SPIDAT1); |
| /* Enable SPI */ |
| set_io_bits(davinci_spi->base + SPIGCR1, SPIGCR1_SPIENA_MASK); |
| |
| while ((ioread32(davinci_spi->base + SPIBUF) |
| & SPIBUF_RXEMPTY_MASK) == 0) |
| cpu_relax(); |
| |
| |
| if (t->tx_buf) { |
| t->tx_dma = dma_map_single(&spi->dev, (void *)t->tx_buf, count, |
| DMA_TO_DEVICE); |
| if (dma_mapping_error(&spi->dev, t->tx_dma)) { |
| dev_dbg(sdev, "Unable to DMA map a %d bytes" |
| " TX buffer\n", count); |
| return -ENOMEM; |
| } |
| temp_count = count; |
| } else { |
| /* We need TX clocking for RX transaction */ |
| t->tx_dma = dma_map_single(&spi->dev, |
| (void *)davinci_spi->tmp_buf, count + 1, |
| DMA_TO_DEVICE); |
| if (dma_mapping_error(&spi->dev, t->tx_dma)) { |
| dev_dbg(sdev, "Unable to DMA map a %d bytes" |
| " TX tmp buffer\n", count); |
| return -ENOMEM; |
| } |
| temp_count = count + 1; |
| } |
| |
| edma_set_transfer_params(davinci_spi_dma->dma_tx_channel, |
| data_type, temp_count, 1, 0, ASYNC); |
| edma_set_dest(davinci_spi_dma->dma_tx_channel, tx_reg, INCR, W8BIT); |
| edma_set_src(davinci_spi_dma->dma_tx_channel, t->tx_dma, INCR, W8BIT); |
| edma_set_src_index(davinci_spi_dma->dma_tx_channel, data_type, 0); |
| edma_set_dest_index(davinci_spi_dma->dma_tx_channel, 0, 0); |
| |
| if (t->rx_buf) { |
| /* initiate transaction */ |
| iowrite32(data1_reg_val, davinci_spi->base + SPIDAT1); |
| |
| t->rx_dma = dma_map_single(&spi->dev, (void *)t->rx_buf, count, |
| DMA_FROM_DEVICE); |
| if (dma_mapping_error(&spi->dev, t->rx_dma)) { |
| dev_dbg(sdev, "Couldn't DMA map a %d bytes RX buffer\n", |
| count); |
| if (t->tx_buf != NULL) |
| dma_unmap_single(NULL, t->tx_dma, |
| count, DMA_TO_DEVICE); |
| return -ENOMEM; |
| } |
| edma_set_transfer_params(davinci_spi_dma->dma_rx_channel, |
| data_type, count, 1, 0, ASYNC); |
| edma_set_src(davinci_spi_dma->dma_rx_channel, |
| rx_reg, INCR, W8BIT); |
| edma_set_dest(davinci_spi_dma->dma_rx_channel, |
| t->rx_dma, INCR, W8BIT); |
| edma_set_src_index(davinci_spi_dma->dma_rx_channel, 0, 0); |
| edma_set_dest_index(davinci_spi_dma->dma_rx_channel, |
| data_type, 0); |
| } |
| |
| if ((t->tx_buf) || (t->rx_buf)) |
| edma_start(davinci_spi_dma->dma_tx_channel); |
| |
| if (t->rx_buf) |
| edma_start(davinci_spi_dma->dma_rx_channel); |
| |
| if ((t->rx_buf) || (t->tx_buf)) |
| davinci_spi_set_dma_req(spi, 1); |
| |
| if (t->tx_buf) |
| wait_for_completion_interruptible( |
| &davinci_spi_dma->dma_tx_completion); |
| |
| if (t->rx_buf) |
| wait_for_completion_interruptible( |
| &davinci_spi_dma->dma_rx_completion); |
| |
| dma_unmap_single(NULL, t->tx_dma, temp_count, DMA_TO_DEVICE); |
| |
| if (t->rx_buf) |
| dma_unmap_single(NULL, t->rx_dma, count, DMA_FROM_DEVICE); |
| |
| /* |
| * Check for bit error, desync error,parity error,timeout error and |
| * receive overflow errors |
| */ |
| int_status = ioread32(davinci_spi->base + SPIFLG); |
| |
| ret = davinci_spi_check_error(davinci_spi, int_status); |
| if (ret != 0) |
| return ret; |
| |
| /* SPI Framework maintains the count only in bytes so convert back */ |
| davinci_spi->count *= conv; |
| |
| return t->len; |
| } |
| |
| /** |
| * davinci_spi_irq - IRQ handler for DaVinci SPI |
| * @irq: IRQ number for this SPI Master |
| * @context_data: structure for SPI Master controller davinci_spi |
| */ |
| static irqreturn_t davinci_spi_irq(s32 irq, void *context_data) |
| { |
| struct davinci_spi *davinci_spi = context_data; |
| u32 int_status, rx_data = 0; |
| irqreturn_t ret = IRQ_NONE; |
| |
| int_status = ioread32(davinci_spi->base + SPIFLG); |
| |
| while ((int_status & SPIFLG_RX_INTR_MASK)) { |
| if (likely(int_status & SPIFLG_RX_INTR_MASK)) { |
| ret = IRQ_HANDLED; |
| |
| rx_data = ioread32(davinci_spi->base + SPIBUF); |
| davinci_spi->get_rx(rx_data, davinci_spi); |
| |
| /* Disable Receive Interrupt */ |
| iowrite32(~(SPIINT_RX_INTR | SPIINT_TX_INTR), |
| davinci_spi->base + SPIINT); |
| } else |
| (void)davinci_spi_check_error(davinci_spi, int_status); |
| |
| int_status = ioread32(davinci_spi->base + SPIFLG); |
| } |
| |
| return ret; |
| } |
| |
| /** |
| * davinci_spi_probe - probe function for SPI Master Controller |
| * @pdev: platform_device structure which contains plateform specific data |
| */ |
| static int davinci_spi_probe(struct platform_device *pdev) |
| { |
| struct spi_master *master; |
| struct davinci_spi *davinci_spi; |
| struct davinci_spi_platform_data *pdata; |
| struct resource *r, *mem; |
| resource_size_t dma_rx_chan = SPI_NO_RESOURCE; |
| resource_size_t dma_tx_chan = SPI_NO_RESOURCE; |
| resource_size_t dma_eventq = SPI_NO_RESOURCE; |
| int i = 0, ret = 0; |
| |
| pdata = pdev->dev.platform_data; |
| if (pdata == NULL) { |
| ret = -ENODEV; |
| goto err; |
| } |
| |
| master = spi_alloc_master(&pdev->dev, sizeof(struct davinci_spi)); |
| if (master == NULL) { |
| ret = -ENOMEM; |
| goto err; |
| } |
| |
| dev_set_drvdata(&pdev->dev, master); |
| |
| davinci_spi = spi_master_get_devdata(master); |
| if (davinci_spi == NULL) { |
| ret = -ENOENT; |
| goto free_master; |
| } |
| |
| r = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (r == NULL) { |
| ret = -ENOENT; |
| goto free_master; |
| } |
| |
| davinci_spi->pbase = r->start; |
| davinci_spi->region_size = resource_size(r); |
| davinci_spi->pdata = pdata; |
| |
| mem = request_mem_region(r->start, davinci_spi->region_size, |
| pdev->name); |
| if (mem == NULL) { |
| ret = -EBUSY; |
| goto free_master; |
| } |
| |
| davinci_spi->base = (struct davinci_spi_reg __iomem *) |
| ioremap(r->start, davinci_spi->region_size); |
| if (davinci_spi->base == NULL) { |
| ret = -ENOMEM; |
| goto release_region; |
| } |
| |
| davinci_spi->irq = platform_get_irq(pdev, 0); |
| if (davinci_spi->irq <= 0) { |
| ret = -EINVAL; |
| goto unmap_io; |
| } |
| |
| ret = request_irq(davinci_spi->irq, davinci_spi_irq, IRQF_DISABLED, |
| dev_name(&pdev->dev), davinci_spi); |
| if (ret) |
| goto unmap_io; |
| |
| /* Allocate tmp_buf for tx_buf */ |
| davinci_spi->tmp_buf = kzalloc(SPI_BUFSIZ, GFP_KERNEL); |
| if (davinci_spi->tmp_buf == NULL) { |
| ret = -ENOMEM; |
| goto irq_free; |
| } |
| |
| davinci_spi->bitbang.master = spi_master_get(master); |
| if (davinci_spi->bitbang.master == NULL) { |
| ret = -ENODEV; |
| goto free_tmp_buf; |
| } |
| |
| davinci_spi->clk = clk_get(&pdev->dev, NULL); |
| if (IS_ERR(davinci_spi->clk)) { |
| ret = -ENODEV; |
| goto put_master; |
| } |
| clk_enable(davinci_spi->clk); |
| |
| |
| master->bus_num = pdev->id; |
| master->num_chipselect = pdata->num_chipselect; |
| master->setup = davinci_spi_setup; |
| master->cleanup = davinci_spi_cleanup; |
| |
| davinci_spi->bitbang.chipselect = davinci_spi_chipselect; |
| davinci_spi->bitbang.setup_transfer = davinci_spi_setup_transfer; |
| |
| davinci_spi->version = pdata->version; |
| use_dma = pdata->use_dma; |
| |
| davinci_spi->bitbang.flags = SPI_NO_CS | SPI_LSB_FIRST | SPI_LOOP; |
| if (davinci_spi->version == SPI_VERSION_2) |
| davinci_spi->bitbang.flags |= SPI_READY; |
| |
| if (use_dma) { |
| r = platform_get_resource(pdev, IORESOURCE_DMA, 0); |
| if (r) |
| dma_rx_chan = r->start; |
| r = platform_get_resource(pdev, IORESOURCE_DMA, 1); |
| if (r) |
| dma_tx_chan = r->start; |
| r = platform_get_resource(pdev, IORESOURCE_DMA, 2); |
| if (r) |
| dma_eventq = r->start; |
| } |
| |
| if (!use_dma || |
| dma_rx_chan == SPI_NO_RESOURCE || |
| dma_tx_chan == SPI_NO_RESOURCE || |
| dma_eventq == SPI_NO_RESOURCE) { |
| davinci_spi->bitbang.txrx_bufs = davinci_spi_bufs_pio; |
| use_dma = 0; |
| } else { |
| davinci_spi->bitbang.txrx_bufs = davinci_spi_bufs_dma; |
| davinci_spi->dma_channels = kzalloc(master->num_chipselect |
| * sizeof(struct davinci_spi_dma), GFP_KERNEL); |
| if (davinci_spi->dma_channels == NULL) { |
| ret = -ENOMEM; |
| goto free_clk; |
| } |
| |
| for (i = 0; i < master->num_chipselect; i++) { |
| davinci_spi->dma_channels[i].dma_rx_channel = -1; |
| davinci_spi->dma_channels[i].dma_rx_sync_dev = |
| dma_rx_chan; |
| davinci_spi->dma_channels[i].dma_tx_channel = -1; |
| davinci_spi->dma_channels[i].dma_tx_sync_dev = |
| dma_tx_chan; |
| davinci_spi->dma_channels[i].eventq = dma_eventq; |
| } |
| dev_info(&pdev->dev, "DaVinci SPI driver in EDMA mode\n" |
| "Using RX channel = %d , TX channel = %d and " |
| "event queue = %d", dma_rx_chan, dma_tx_chan, |
| dma_eventq); |
| } |
| |
| davinci_spi->get_rx = davinci_spi_rx_buf_u8; |
| davinci_spi->get_tx = davinci_spi_tx_buf_u8; |
| |
| init_completion(&davinci_spi->done); |
| |
| /* Reset In/OUT SPI module */ |
| iowrite32(0, davinci_spi->base + SPIGCR0); |
| udelay(100); |
| iowrite32(1, davinci_spi->base + SPIGCR0); |
| |
| /* Clock internal */ |
| if (davinci_spi->pdata->clk_internal) |
| set_io_bits(davinci_spi->base + SPIGCR1, |
| SPIGCR1_CLKMOD_MASK); |
| else |
| clear_io_bits(davinci_spi->base + SPIGCR1, |
| SPIGCR1_CLKMOD_MASK); |
| |
| /* master mode default */ |
| set_io_bits(davinci_spi->base + SPIGCR1, SPIGCR1_MASTER_MASK); |
| |
| if (davinci_spi->pdata->intr_level) |
| iowrite32(SPI_INTLVL_1, davinci_spi->base + SPILVL); |
| else |
| iowrite32(SPI_INTLVL_0, davinci_spi->base + SPILVL); |
| |
| ret = spi_bitbang_start(&davinci_spi->bitbang); |
| if (ret) |
| goto free_clk; |
| |
| dev_info(&pdev->dev, "Controller at 0x%p \n", davinci_spi->base); |
| |
| if (!pdata->poll_mode) |
| dev_info(&pdev->dev, "Operating in interrupt mode" |
| " using IRQ %d\n", davinci_spi->irq); |
| |
| return ret; |
| |
| free_clk: |
| clk_disable(davinci_spi->clk); |
| clk_put(davinci_spi->clk); |
| put_master: |
| spi_master_put(master); |
| free_tmp_buf: |
| kfree(davinci_spi->tmp_buf); |
| irq_free: |
| free_irq(davinci_spi->irq, davinci_spi); |
| unmap_io: |
| iounmap(davinci_spi->base); |
| release_region: |
| release_mem_region(davinci_spi->pbase, davinci_spi->region_size); |
| free_master: |
| kfree(master); |
| err: |
| return ret; |
| } |
| |
| /** |
| * davinci_spi_remove - remove function for SPI Master Controller |
| * @pdev: platform_device structure which contains plateform specific data |
| * |
| * This function will do the reverse action of davinci_spi_probe function |
| * It will free the IRQ and SPI controller's memory region. |
| * It will also call spi_bitbang_stop to destroy the work queue which was |
| * created by spi_bitbang_start. |
| */ |
| static int __exit davinci_spi_remove(struct platform_device *pdev) |
| { |
| struct davinci_spi *davinci_spi; |
| struct spi_master *master; |
| |
| master = dev_get_drvdata(&pdev->dev); |
| davinci_spi = spi_master_get_devdata(master); |
| |
| spi_bitbang_stop(&davinci_spi->bitbang); |
| |
| clk_disable(davinci_spi->clk); |
| clk_put(davinci_spi->clk); |
| spi_master_put(master); |
| kfree(davinci_spi->tmp_buf); |
| free_irq(davinci_spi->irq, davinci_spi); |
| iounmap(davinci_spi->base); |
| release_mem_region(davinci_spi->pbase, davinci_spi->region_size); |
| |
| return 0; |
| } |
| |
| static struct platform_driver davinci_spi_driver = { |
| .driver.name = "spi_davinci", |
| .remove = __exit_p(davinci_spi_remove), |
| }; |
| |
| static int __init davinci_spi_init(void) |
| { |
| return platform_driver_probe(&davinci_spi_driver, davinci_spi_probe); |
| } |
| module_init(davinci_spi_init); |
| |
| static void __exit davinci_spi_exit(void) |
| { |
| platform_driver_unregister(&davinci_spi_driver); |
| } |
| module_exit(davinci_spi_exit); |
| |
| MODULE_DESCRIPTION("TI DaVinci SPI Master Controller Driver"); |
| MODULE_LICENSE("GPL"); |