| /* |
| * QLogic Fibre Channel HBA Driver |
| * Copyright (c) 2003-2008 QLogic Corporation |
| * |
| * See LICENSE.qla2xxx for copyright and licensing details. |
| */ |
| #include "qla_def.h" |
| #include <linux/delay.h> |
| #include <linux/pci.h> |
| |
| #define MASK(n) ((1ULL<<(n))-1) |
| #define MN_WIN(addr) (((addr & 0x1fc0000) >> 1) | \ |
| ((addr >> 25) & 0x3ff)) |
| #define OCM_WIN(addr) (((addr & 0x1ff0000) >> 1) | \ |
| ((addr >> 25) & 0x3ff)) |
| #define MS_WIN(addr) (addr & 0x0ffc0000) |
| #define QLA82XX_PCI_MN_2M (0) |
| #define QLA82XX_PCI_MS_2M (0x80000) |
| #define QLA82XX_PCI_OCM0_2M (0xc0000) |
| #define VALID_OCM_ADDR(addr) (((addr) & 0x3f800) != 0x3f800) |
| #define GET_MEM_OFFS_2M(addr) (addr & MASK(18)) |
| |
| /* CRB window related */ |
| #define CRB_BLK(off) ((off >> 20) & 0x3f) |
| #define CRB_SUBBLK(off) ((off >> 16) & 0xf) |
| #define CRB_WINDOW_2M (0x130060) |
| #define QLA82XX_PCI_CAMQM_2M_END (0x04800800UL) |
| #define CRB_HI(off) ((qla82xx_crb_hub_agt[CRB_BLK(off)] << 20) | \ |
| ((off) & 0xf0000)) |
| #define QLA82XX_PCI_CAMQM_2M_BASE (0x000ff800UL) |
| #define CRB_INDIRECT_2M (0x1e0000UL) |
| |
| #define MAX_CRB_XFORM 60 |
| static unsigned long crb_addr_xform[MAX_CRB_XFORM]; |
| int qla82xx_crb_table_initialized; |
| |
| #define qla82xx_crb_addr_transform(name) \ |
| (crb_addr_xform[QLA82XX_HW_PX_MAP_CRB_##name] = \ |
| QLA82XX_HW_CRB_HUB_AGT_ADR_##name << 20) |
| |
| static void qla82xx_crb_addr_transform_setup(void) |
| { |
| qla82xx_crb_addr_transform(XDMA); |
| qla82xx_crb_addr_transform(TIMR); |
| qla82xx_crb_addr_transform(SRE); |
| qla82xx_crb_addr_transform(SQN3); |
| qla82xx_crb_addr_transform(SQN2); |
| qla82xx_crb_addr_transform(SQN1); |
| qla82xx_crb_addr_transform(SQN0); |
| qla82xx_crb_addr_transform(SQS3); |
| qla82xx_crb_addr_transform(SQS2); |
| qla82xx_crb_addr_transform(SQS1); |
| qla82xx_crb_addr_transform(SQS0); |
| qla82xx_crb_addr_transform(RPMX7); |
| qla82xx_crb_addr_transform(RPMX6); |
| qla82xx_crb_addr_transform(RPMX5); |
| qla82xx_crb_addr_transform(RPMX4); |
| qla82xx_crb_addr_transform(RPMX3); |
| qla82xx_crb_addr_transform(RPMX2); |
| qla82xx_crb_addr_transform(RPMX1); |
| qla82xx_crb_addr_transform(RPMX0); |
| qla82xx_crb_addr_transform(ROMUSB); |
| qla82xx_crb_addr_transform(SN); |
| qla82xx_crb_addr_transform(QMN); |
| qla82xx_crb_addr_transform(QMS); |
| qla82xx_crb_addr_transform(PGNI); |
| qla82xx_crb_addr_transform(PGND); |
| qla82xx_crb_addr_transform(PGN3); |
| qla82xx_crb_addr_transform(PGN2); |
| qla82xx_crb_addr_transform(PGN1); |
| qla82xx_crb_addr_transform(PGN0); |
| qla82xx_crb_addr_transform(PGSI); |
| qla82xx_crb_addr_transform(PGSD); |
| qla82xx_crb_addr_transform(PGS3); |
| qla82xx_crb_addr_transform(PGS2); |
| qla82xx_crb_addr_transform(PGS1); |
| qla82xx_crb_addr_transform(PGS0); |
| qla82xx_crb_addr_transform(PS); |
| qla82xx_crb_addr_transform(PH); |
| qla82xx_crb_addr_transform(NIU); |
| qla82xx_crb_addr_transform(I2Q); |
| qla82xx_crb_addr_transform(EG); |
| qla82xx_crb_addr_transform(MN); |
| qla82xx_crb_addr_transform(MS); |
| qla82xx_crb_addr_transform(CAS2); |
| qla82xx_crb_addr_transform(CAS1); |
| qla82xx_crb_addr_transform(CAS0); |
| qla82xx_crb_addr_transform(CAM); |
| qla82xx_crb_addr_transform(C2C1); |
| qla82xx_crb_addr_transform(C2C0); |
| qla82xx_crb_addr_transform(SMB); |
| qla82xx_crb_addr_transform(OCM0); |
| /* |
| * Used only in P3 just define it for P2 also. |
| */ |
| qla82xx_crb_addr_transform(I2C0); |
| |
| qla82xx_crb_table_initialized = 1; |
| } |
| |
| struct crb_128M_2M_block_map crb_128M_2M_map[64] = { |
| {{{0, 0, 0, 0} } }, |
| {{{1, 0x0100000, 0x0102000, 0x120000}, |
| {1, 0x0110000, 0x0120000, 0x130000}, |
| {1, 0x0120000, 0x0122000, 0x124000}, |
| {1, 0x0130000, 0x0132000, 0x126000}, |
| {1, 0x0140000, 0x0142000, 0x128000}, |
| {1, 0x0150000, 0x0152000, 0x12a000}, |
| {1, 0x0160000, 0x0170000, 0x110000}, |
| {1, 0x0170000, 0x0172000, 0x12e000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {1, 0x01e0000, 0x01e0800, 0x122000}, |
| {0, 0x0000000, 0x0000000, 0x000000} } } , |
| {{{1, 0x0200000, 0x0210000, 0x180000} } }, |
| {{{0, 0, 0, 0} } }, |
| {{{1, 0x0400000, 0x0401000, 0x169000} } }, |
| {{{1, 0x0500000, 0x0510000, 0x140000} } }, |
| {{{1, 0x0600000, 0x0610000, 0x1c0000} } }, |
| {{{1, 0x0700000, 0x0704000, 0x1b8000} } }, |
| {{{1, 0x0800000, 0x0802000, 0x170000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {1, 0x08f0000, 0x08f2000, 0x172000} } }, |
| {{{1, 0x0900000, 0x0902000, 0x174000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {1, 0x09f0000, 0x09f2000, 0x176000} } }, |
| {{{0, 0x0a00000, 0x0a02000, 0x178000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {1, 0x0af0000, 0x0af2000, 0x17a000} } }, |
| {{{0, 0x0b00000, 0x0b02000, 0x17c000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {1, 0x0bf0000, 0x0bf2000, 0x17e000} } }, |
| {{{1, 0x0c00000, 0x0c04000, 0x1d4000} } }, |
| {{{1, 0x0d00000, 0x0d04000, 0x1a4000} } }, |
| {{{1, 0x0e00000, 0x0e04000, 0x1a0000} } }, |
| {{{1, 0x0f00000, 0x0f01000, 0x164000} } }, |
| {{{0, 0x1000000, 0x1004000, 0x1a8000} } }, |
| {{{1, 0x1100000, 0x1101000, 0x160000} } }, |
| {{{1, 0x1200000, 0x1201000, 0x161000} } }, |
| {{{1, 0x1300000, 0x1301000, 0x162000} } }, |
| {{{1, 0x1400000, 0x1401000, 0x163000} } }, |
| {{{1, 0x1500000, 0x1501000, 0x165000} } }, |
| {{{1, 0x1600000, 0x1601000, 0x166000} } }, |
| {{{0, 0, 0, 0} } }, |
| {{{0, 0, 0, 0} } }, |
| {{{0, 0, 0, 0} } }, |
| {{{0, 0, 0, 0} } }, |
| {{{0, 0, 0, 0} } }, |
| {{{0, 0, 0, 0} } }, |
| {{{1, 0x1d00000, 0x1d10000, 0x190000} } }, |
| {{{1, 0x1e00000, 0x1e01000, 0x16a000} } }, |
| {{{1, 0x1f00000, 0x1f10000, 0x150000} } }, |
| {{{0} } }, |
| {{{1, 0x2100000, 0x2102000, 0x120000}, |
| {1, 0x2110000, 0x2120000, 0x130000}, |
| {1, 0x2120000, 0x2122000, 0x124000}, |
| {1, 0x2130000, 0x2132000, 0x126000}, |
| {1, 0x2140000, 0x2142000, 0x128000}, |
| {1, 0x2150000, 0x2152000, 0x12a000}, |
| {1, 0x2160000, 0x2170000, 0x110000}, |
| {1, 0x2170000, 0x2172000, 0x12e000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000}, |
| {0, 0x0000000, 0x0000000, 0x000000} } }, |
| {{{1, 0x2200000, 0x2204000, 0x1b0000} } }, |
| {{{0} } }, |
| {{{0} } }, |
| {{{0} } }, |
| {{{0} } }, |
| {{{0} } }, |
| {{{1, 0x2800000, 0x2804000, 0x1a4000} } }, |
| {{{1, 0x2900000, 0x2901000, 0x16b000} } }, |
| {{{1, 0x2a00000, 0x2a00400, 0x1ac400} } }, |
| {{{1, 0x2b00000, 0x2b00400, 0x1ac800} } }, |
| {{{1, 0x2c00000, 0x2c00400, 0x1acc00} } }, |
| {{{1, 0x2d00000, 0x2d00400, 0x1ad000} } }, |
| {{{1, 0x2e00000, 0x2e00400, 0x1ad400} } }, |
| {{{1, 0x2f00000, 0x2f00400, 0x1ad800} } }, |
| {{{1, 0x3000000, 0x3000400, 0x1adc00} } }, |
| {{{0, 0x3100000, 0x3104000, 0x1a8000} } }, |
| {{{1, 0x3200000, 0x3204000, 0x1d4000} } }, |
| {{{1, 0x3300000, 0x3304000, 0x1a0000} } }, |
| {{{0} } }, |
| {{{1, 0x3500000, 0x3500400, 0x1ac000} } }, |
| {{{1, 0x3600000, 0x3600400, 0x1ae000} } }, |
| {{{1, 0x3700000, 0x3700400, 0x1ae400} } }, |
| {{{1, 0x3800000, 0x3804000, 0x1d0000} } }, |
| {{{1, 0x3900000, 0x3904000, 0x1b4000} } }, |
| {{{1, 0x3a00000, 0x3a04000, 0x1d8000} } }, |
| {{{0} } }, |
| {{{0} } }, |
| {{{1, 0x3d00000, 0x3d04000, 0x1dc000} } }, |
| {{{1, 0x3e00000, 0x3e01000, 0x167000} } }, |
| {{{1, 0x3f00000, 0x3f01000, 0x168000} } } |
| }; |
| |
| /* |
| * top 12 bits of crb internal address (hub, agent) |
| */ |
| unsigned qla82xx_crb_hub_agt[64] = { |
| 0, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_PS, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_MN, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_MS, |
| 0, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_SRE, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_NIU, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_QMN, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_SQN0, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_SQN1, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_SQN2, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_SQN3, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_I2Q, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_TIMR, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_ROMUSB, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_PGN4, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_XDMA, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_PGN0, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_PGN1, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_PGN2, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_PGN3, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_PGND, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_PGNI, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_PGS0, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_PGS1, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_PGS2, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_PGS3, |
| 0, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_PGSI, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_SN, |
| 0, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_EG, |
| 0, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_PS, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_CAM, |
| 0, |
| 0, |
| 0, |
| 0, |
| 0, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_TIMR, |
| 0, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_RPMX1, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_RPMX2, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_RPMX3, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_RPMX4, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_RPMX5, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_RPMX6, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_RPMX7, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_XDMA, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_I2Q, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_ROMUSB, |
| 0, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_RPMX0, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_RPMX8, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_RPMX9, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_OCM0, |
| 0, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_SMB, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_I2C0, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_I2C1, |
| 0, |
| QLA82XX_HW_CRB_HUB_AGT_ADR_PGNC, |
| 0, |
| }; |
| |
| /* Device states */ |
| char *qdev_state[] = { |
| "Unknown", |
| "Cold", |
| "Initializing", |
| "Ready", |
| "Need Reset", |
| "Need Quiescent", |
| "Failed", |
| "Quiescent", |
| }; |
| |
| /* |
| * In: 'off' is offset from CRB space in 128M pci map |
| * Out: 'off' is 2M pci map addr |
| * side effect: lock crb window |
| */ |
| static void |
| qla82xx_pci_set_crbwindow_2M(struct qla_hw_data *ha, ulong *off) |
| { |
| u32 win_read; |
| |
| ha->crb_win = CRB_HI(*off); |
| writel(ha->crb_win, |
| (void *)(CRB_WINDOW_2M + ha->nx_pcibase)); |
| |
| /* Read back value to make sure write has gone through before trying |
| * to use it. |
| */ |
| win_read = RD_REG_DWORD((void *)(CRB_WINDOW_2M + ha->nx_pcibase)); |
| if (win_read != ha->crb_win) { |
| DEBUG2(qla_printk(KERN_INFO, ha, |
| "%s: Written crbwin (0x%x) != Read crbwin (0x%x), " |
| "off=0x%lx\n", __func__, ha->crb_win, win_read, *off)); |
| } |
| *off = (*off & MASK(16)) + CRB_INDIRECT_2M + ha->nx_pcibase; |
| } |
| |
| static inline unsigned long |
| qla82xx_pci_set_crbwindow(struct qla_hw_data *ha, u64 off) |
| { |
| /* See if we are currently pointing to the region we want to use next */ |
| if ((off >= QLA82XX_CRB_PCIX_HOST) && (off < QLA82XX_CRB_DDR_NET)) { |
| /* No need to change window. PCIX and PCIEregs are in both |
| * regs are in both windows. |
| */ |
| return off; |
| } |
| |
| if ((off >= QLA82XX_CRB_PCIX_HOST) && (off < QLA82XX_CRB_PCIX_HOST2)) { |
| /* We are in first CRB window */ |
| if (ha->curr_window != 0) |
| WARN_ON(1); |
| return off; |
| } |
| |
| if ((off > QLA82XX_CRB_PCIX_HOST2) && (off < QLA82XX_CRB_MAX)) { |
| /* We are in second CRB window */ |
| off = off - QLA82XX_CRB_PCIX_HOST2 + QLA82XX_CRB_PCIX_HOST; |
| |
| if (ha->curr_window != 1) |
| return off; |
| |
| /* We are in the QM or direct access |
| * register region - do nothing |
| */ |
| if ((off >= QLA82XX_PCI_DIRECT_CRB) && |
| (off < QLA82XX_PCI_CAMQM_MAX)) |
| return off; |
| } |
| /* strange address given */ |
| qla_printk(KERN_WARNING, ha, |
| "%s: Warning: unm_nic_pci_set_crbwindow called with" |
| " an unknown address(%llx)\n", QLA2XXX_DRIVER_NAME, off); |
| return off; |
| } |
| |
| int |
| qla82xx_wr_32(struct qla_hw_data *ha, ulong off, u32 data) |
| { |
| unsigned long flags = 0; |
| int rv; |
| |
| rv = qla82xx_pci_get_crb_addr_2M(ha, &off); |
| |
| BUG_ON(rv == -1); |
| |
| if (rv == 1) { |
| write_lock_irqsave(&ha->hw_lock, flags); |
| qla82xx_crb_win_lock(ha); |
| qla82xx_pci_set_crbwindow_2M(ha, &off); |
| } |
| |
| writel(data, (void __iomem *)off); |
| |
| if (rv == 1) { |
| qla82xx_rd_32(ha, QLA82XX_PCIE_REG(PCIE_SEM7_UNLOCK)); |
| write_unlock_irqrestore(&ha->hw_lock, flags); |
| } |
| return 0; |
| } |
| |
| int |
| qla82xx_rd_32(struct qla_hw_data *ha, ulong off) |
| { |
| unsigned long flags = 0; |
| int rv; |
| u32 data; |
| |
| rv = qla82xx_pci_get_crb_addr_2M(ha, &off); |
| |
| BUG_ON(rv == -1); |
| |
| if (rv == 1) { |
| write_lock_irqsave(&ha->hw_lock, flags); |
| qla82xx_crb_win_lock(ha); |
| qla82xx_pci_set_crbwindow_2M(ha, &off); |
| } |
| data = RD_REG_DWORD((void __iomem *)off); |
| |
| if (rv == 1) { |
| qla82xx_rd_32(ha, QLA82XX_PCIE_REG(PCIE_SEM7_UNLOCK)); |
| write_unlock_irqrestore(&ha->hw_lock, flags); |
| } |
| return data; |
| } |
| |
| #define CRB_WIN_LOCK_TIMEOUT 100000000 |
| int qla82xx_crb_win_lock(struct qla_hw_data *ha) |
| { |
| int done = 0, timeout = 0; |
| |
| while (!done) { |
| /* acquire semaphore3 from PCI HW block */ |
| done = qla82xx_rd_32(ha, QLA82XX_PCIE_REG(PCIE_SEM7_LOCK)); |
| if (done == 1) |
| break; |
| if (timeout >= CRB_WIN_LOCK_TIMEOUT) |
| return -1; |
| timeout++; |
| } |
| qla82xx_wr_32(ha, QLA82XX_CRB_WIN_LOCK_ID, ha->portnum); |
| return 0; |
| } |
| |
| #define IDC_LOCK_TIMEOUT 100000000 |
| int qla82xx_idc_lock(struct qla_hw_data *ha) |
| { |
| int i; |
| int done = 0, timeout = 0; |
| |
| while (!done) { |
| /* acquire semaphore5 from PCI HW block */ |
| done = qla82xx_rd_32(ha, QLA82XX_PCIE_REG(PCIE_SEM5_LOCK)); |
| if (done == 1) |
| break; |
| if (timeout >= IDC_LOCK_TIMEOUT) |
| return -1; |
| |
| timeout++; |
| |
| /* Yield CPU */ |
| if (!in_interrupt()) |
| schedule(); |
| else { |
| for (i = 0; i < 20; i++) |
| cpu_relax(); |
| } |
| } |
| |
| return 0; |
| } |
| |
| void qla82xx_idc_unlock(struct qla_hw_data *ha) |
| { |
| qla82xx_rd_32(ha, QLA82XX_PCIE_REG(PCIE_SEM5_UNLOCK)); |
| } |
| |
| int |
| qla82xx_pci_get_crb_addr_2M(struct qla_hw_data *ha, ulong *off) |
| { |
| struct crb_128M_2M_sub_block_map *m; |
| |
| if (*off >= QLA82XX_CRB_MAX) |
| return -1; |
| |
| if (*off >= QLA82XX_PCI_CAMQM && (*off < QLA82XX_PCI_CAMQM_2M_END)) { |
| *off = (*off - QLA82XX_PCI_CAMQM) + |
| QLA82XX_PCI_CAMQM_2M_BASE + ha->nx_pcibase; |
| return 0; |
| } |
| |
| if (*off < QLA82XX_PCI_CRBSPACE) |
| return -1; |
| |
| *off -= QLA82XX_PCI_CRBSPACE; |
| |
| /* Try direct map */ |
| m = &crb_128M_2M_map[CRB_BLK(*off)].sub_block[CRB_SUBBLK(*off)]; |
| |
| if (m->valid && (m->start_128M <= *off) && (m->end_128M > *off)) { |
| *off = *off + m->start_2M - m->start_128M + ha->nx_pcibase; |
| return 0; |
| } |
| /* Not in direct map, use crb window */ |
| return 1; |
| } |
| |
| /* PCI Windowing for DDR regions. */ |
| #define QLA82XX_ADDR_IN_RANGE(addr, low, high) \ |
| (((addr) <= (high)) && ((addr) >= (low))) |
| /* |
| * check memory access boundary. |
| * used by test agent. support ddr access only for now |
| */ |
| static unsigned long |
| qla82xx_pci_mem_bound_check(struct qla_hw_data *ha, |
| unsigned long long addr, int size) |
| { |
| if (!QLA82XX_ADDR_IN_RANGE(addr, QLA82XX_ADDR_DDR_NET, |
| QLA82XX_ADDR_DDR_NET_MAX) || |
| !QLA82XX_ADDR_IN_RANGE(addr + size - 1, QLA82XX_ADDR_DDR_NET, |
| QLA82XX_ADDR_DDR_NET_MAX) || |
| ((size != 1) && (size != 2) && (size != 4) && (size != 8))) |
| return 0; |
| else |
| return 1; |
| } |
| |
| int qla82xx_pci_set_window_warning_count; |
| |
| unsigned long |
| qla82xx_pci_set_window(struct qla_hw_data *ha, unsigned long long addr) |
| { |
| int window; |
| u32 win_read; |
| |
| if (QLA82XX_ADDR_IN_RANGE(addr, QLA82XX_ADDR_DDR_NET, |
| QLA82XX_ADDR_DDR_NET_MAX)) { |
| /* DDR network side */ |
| window = MN_WIN(addr); |
| ha->ddr_mn_window = window; |
| qla82xx_wr_32(ha, |
| ha->mn_win_crb | QLA82XX_PCI_CRBSPACE, window); |
| win_read = qla82xx_rd_32(ha, |
| ha->mn_win_crb | QLA82XX_PCI_CRBSPACE); |
| if ((win_read << 17) != window) { |
| qla_printk(KERN_WARNING, ha, |
| "%s: Written MNwin (0x%x) != Read MNwin (0x%x)\n", |
| __func__, window, win_read); |
| } |
| addr = GET_MEM_OFFS_2M(addr) + QLA82XX_PCI_DDR_NET; |
| } else if (QLA82XX_ADDR_IN_RANGE(addr, QLA82XX_ADDR_OCM0, |
| QLA82XX_ADDR_OCM0_MAX)) { |
| unsigned int temp1; |
| if ((addr & 0x00ff800) == 0xff800) { |
| qla_printk(KERN_WARNING, ha, |
| "%s: QM access not handled.\n", __func__); |
| addr = -1UL; |
| } |
| window = OCM_WIN(addr); |
| ha->ddr_mn_window = window; |
| qla82xx_wr_32(ha, |
| ha->mn_win_crb | QLA82XX_PCI_CRBSPACE, window); |
| win_read = qla82xx_rd_32(ha, |
| ha->mn_win_crb | QLA82XX_PCI_CRBSPACE); |
| temp1 = ((window & 0x1FF) << 7) | |
| ((window & 0x0FFFE0000) >> 17); |
| if (win_read != temp1) { |
| qla_printk(KERN_WARNING, ha, |
| "%s: Written OCMwin (0x%x) != Read OCMwin (0x%x)\n", |
| __func__, temp1, win_read); |
| } |
| addr = GET_MEM_OFFS_2M(addr) + QLA82XX_PCI_OCM0_2M; |
| |
| } else if (QLA82XX_ADDR_IN_RANGE(addr, QLA82XX_ADDR_QDR_NET, |
| QLA82XX_P3_ADDR_QDR_NET_MAX)) { |
| /* QDR network side */ |
| window = MS_WIN(addr); |
| ha->qdr_sn_window = window; |
| qla82xx_wr_32(ha, |
| ha->ms_win_crb | QLA82XX_PCI_CRBSPACE, window); |
| win_read = qla82xx_rd_32(ha, |
| ha->ms_win_crb | QLA82XX_PCI_CRBSPACE); |
| if (win_read != window) { |
| qla_printk(KERN_WARNING, ha, |
| "%s: Written MSwin (0x%x) != Read MSwin (0x%x)\n", |
| __func__, window, win_read); |
| } |
| addr = GET_MEM_OFFS_2M(addr) + QLA82XX_PCI_QDR_NET; |
| } else { |
| /* |
| * peg gdb frequently accesses memory that doesn't exist, |
| * this limits the chit chat so debugging isn't slowed down. |
| */ |
| if ((qla82xx_pci_set_window_warning_count++ < 8) || |
| (qla82xx_pci_set_window_warning_count%64 == 0)) { |
| qla_printk(KERN_WARNING, ha, |
| "%s: Warning:%s Unknown address range!\n", __func__, |
| QLA2XXX_DRIVER_NAME); |
| } |
| addr = -1UL; |
| } |
| return addr; |
| } |
| |
| /* check if address is in the same windows as the previous access */ |
| static int qla82xx_pci_is_same_window(struct qla_hw_data *ha, |
| unsigned long long addr) |
| { |
| int window; |
| unsigned long long qdr_max; |
| |
| qdr_max = QLA82XX_P3_ADDR_QDR_NET_MAX; |
| |
| /* DDR network side */ |
| if (QLA82XX_ADDR_IN_RANGE(addr, QLA82XX_ADDR_DDR_NET, |
| QLA82XX_ADDR_DDR_NET_MAX)) |
| BUG(); |
| else if (QLA82XX_ADDR_IN_RANGE(addr, QLA82XX_ADDR_OCM0, |
| QLA82XX_ADDR_OCM0_MAX)) |
| return 1; |
| else if (QLA82XX_ADDR_IN_RANGE(addr, QLA82XX_ADDR_OCM1, |
| QLA82XX_ADDR_OCM1_MAX)) |
| return 1; |
| else if (QLA82XX_ADDR_IN_RANGE(addr, QLA82XX_ADDR_QDR_NET, qdr_max)) { |
| /* QDR network side */ |
| window = ((addr - QLA82XX_ADDR_QDR_NET) >> 22) & 0x3f; |
| if (ha->qdr_sn_window == window) |
| return 1; |
| } |
| return 0; |
| } |
| |
| static int qla82xx_pci_mem_read_direct(struct qla_hw_data *ha, |
| u64 off, void *data, int size) |
| { |
| unsigned long flags; |
| void *addr = NULL; |
| int ret = 0; |
| u64 start; |
| uint8_t *mem_ptr = NULL; |
| unsigned long mem_base; |
| unsigned long mem_page; |
| |
| write_lock_irqsave(&ha->hw_lock, flags); |
| |
| /* |
| * If attempting to access unknown address or straddle hw windows, |
| * do not access. |
| */ |
| start = qla82xx_pci_set_window(ha, off); |
| if ((start == -1UL) || |
| (qla82xx_pci_is_same_window(ha, off + size - 1) == 0)) { |
| write_unlock_irqrestore(&ha->hw_lock, flags); |
| qla_printk(KERN_ERR, ha, |
| "%s out of bound pci memory access. " |
| "offset is 0x%llx\n", QLA2XXX_DRIVER_NAME, off); |
| return -1; |
| } |
| |
| write_unlock_irqrestore(&ha->hw_lock, flags); |
| mem_base = pci_resource_start(ha->pdev, 0); |
| mem_page = start & PAGE_MASK; |
| /* Map two pages whenever user tries to access addresses in two |
| * consecutive pages. |
| */ |
| if (mem_page != ((start + size - 1) & PAGE_MASK)) |
| mem_ptr = ioremap(mem_base + mem_page, PAGE_SIZE * 2); |
| else |
| mem_ptr = ioremap(mem_base + mem_page, PAGE_SIZE); |
| if (mem_ptr == 0UL) { |
| *(u8 *)data = 0; |
| return -1; |
| } |
| addr = mem_ptr; |
| addr += start & (PAGE_SIZE - 1); |
| write_lock_irqsave(&ha->hw_lock, flags); |
| |
| switch (size) { |
| case 1: |
| *(u8 *)data = readb(addr); |
| break; |
| case 2: |
| *(u16 *)data = readw(addr); |
| break; |
| case 4: |
| *(u32 *)data = readl(addr); |
| break; |
| case 8: |
| *(u64 *)data = readq(addr); |
| break; |
| default: |
| ret = -1; |
| break; |
| } |
| write_unlock_irqrestore(&ha->hw_lock, flags); |
| |
| if (mem_ptr) |
| iounmap(mem_ptr); |
| return ret; |
| } |
| |
| static int |
| qla82xx_pci_mem_write_direct(struct qla_hw_data *ha, |
| u64 off, void *data, int size) |
| { |
| unsigned long flags; |
| void *addr = NULL; |
| int ret = 0; |
| u64 start; |
| uint8_t *mem_ptr = NULL; |
| unsigned long mem_base; |
| unsigned long mem_page; |
| |
| write_lock_irqsave(&ha->hw_lock, flags); |
| |
| /* |
| * If attempting to access unknown address or straddle hw windows, |
| * do not access. |
| */ |
| start = qla82xx_pci_set_window(ha, off); |
| if ((start == -1UL) || |
| (qla82xx_pci_is_same_window(ha, off + size - 1) == 0)) { |
| write_unlock_irqrestore(&ha->hw_lock, flags); |
| qla_printk(KERN_ERR, ha, |
| "%s out of bound pci memory access. " |
| "offset is 0x%llx\n", QLA2XXX_DRIVER_NAME, off); |
| return -1; |
| } |
| |
| write_unlock_irqrestore(&ha->hw_lock, flags); |
| mem_base = pci_resource_start(ha->pdev, 0); |
| mem_page = start & PAGE_MASK; |
| /* Map two pages whenever user tries to access addresses in two |
| * consecutive pages. |
| */ |
| if (mem_page != ((start + size - 1) & PAGE_MASK)) |
| mem_ptr = ioremap(mem_base + mem_page, PAGE_SIZE*2); |
| else |
| mem_ptr = ioremap(mem_base + mem_page, PAGE_SIZE); |
| if (mem_ptr == 0UL) |
| return -1; |
| |
| addr = mem_ptr; |
| addr += start & (PAGE_SIZE - 1); |
| write_lock_irqsave(&ha->hw_lock, flags); |
| |
| switch (size) { |
| case 1: |
| writeb(*(u8 *)data, addr); |
| break; |
| case 2: |
| writew(*(u16 *)data, addr); |
| break; |
| case 4: |
| writel(*(u32 *)data, addr); |
| break; |
| case 8: |
| writeq(*(u64 *)data, addr); |
| break; |
| default: |
| ret = -1; |
| break; |
| } |
| write_unlock_irqrestore(&ha->hw_lock, flags); |
| if (mem_ptr) |
| iounmap(mem_ptr); |
| return ret; |
| } |
| |
| int |
| qla82xx_wrmem(struct qla_hw_data *ha, u64 off, void *data, int size) |
| { |
| int i, j, ret = 0, loop, sz[2], off0; |
| u32 temp; |
| u64 off8, mem_crb, tmpw, word[2] = {0, 0}; |
| #define MAX_CTL_CHECK 1000 |
| /* |
| * If not MN, go check for MS or invalid. |
| */ |
| if (off >= QLA82XX_ADDR_QDR_NET && off <= QLA82XX_P3_ADDR_QDR_NET_MAX) { |
| mem_crb = QLA82XX_CRB_QDR_NET; |
| } else { |
| mem_crb = QLA82XX_CRB_DDR_NET; |
| if (qla82xx_pci_mem_bound_check(ha, off, size) == 0) |
| return qla82xx_pci_mem_write_direct(ha, off, |
| data, size); |
| } |
| |
| off8 = off & 0xfffffff8; |
| off0 = off & 0x7; |
| sz[0] = (size < (8 - off0)) ? size : (8 - off0); |
| sz[1] = size - sz[0]; |
| loop = ((off0 + size - 1) >> 3) + 1; |
| |
| if ((size != 8) || (off0 != 0)) { |
| for (i = 0; i < loop; i++) { |
| if (qla82xx_rdmem(ha, off8 + (i << 3), &word[i], 8)) |
| return -1; |
| } |
| } |
| |
| switch (size) { |
| case 1: |
| tmpw = *((u8 *)data); |
| break; |
| case 2: |
| tmpw = *((u16 *)data); |
| break; |
| case 4: |
| tmpw = *((u32 *)data); |
| break; |
| case 8: |
| default: |
| tmpw = *((u64 *)data); |
| break; |
| } |
| |
| word[0] &= ~((~(~0ULL << (sz[0] * 8))) << (off0 * 8)); |
| word[0] |= tmpw << (off0 * 8); |
| |
| if (loop == 2) { |
| word[1] &= ~(~0ULL << (sz[1] * 8)); |
| word[1] |= tmpw >> (sz[0] * 8); |
| } |
| |
| for (i = 0; i < loop; i++) { |
| temp = off8 + (i << 3); |
| qla82xx_wr_32(ha, mem_crb+MIU_TEST_AGT_ADDR_LO, temp); |
| temp = 0; |
| qla82xx_wr_32(ha, mem_crb+MIU_TEST_AGT_ADDR_HI, temp); |
| temp = word[i] & 0xffffffff; |
| qla82xx_wr_32(ha, mem_crb+MIU_TEST_AGT_WRDATA_LO, temp); |
| temp = (word[i] >> 32) & 0xffffffff; |
| qla82xx_wr_32(ha, mem_crb+MIU_TEST_AGT_WRDATA_HI, temp); |
| temp = MIU_TA_CTL_ENABLE | MIU_TA_CTL_WRITE; |
| qla82xx_wr_32(ha, mem_crb+MIU_TEST_AGT_CTRL, temp); |
| temp = MIU_TA_CTL_START | MIU_TA_CTL_ENABLE | MIU_TA_CTL_WRITE; |
| qla82xx_wr_32(ha, mem_crb+MIU_TEST_AGT_CTRL, temp); |
| |
| for (j = 0; j < MAX_CTL_CHECK; j++) { |
| temp = qla82xx_rd_32(ha, mem_crb + MIU_TEST_AGT_CTRL); |
| if ((temp & MIU_TA_CTL_BUSY) == 0) |
| break; |
| } |
| |
| if (j >= MAX_CTL_CHECK) { |
| qla_printk(KERN_WARNING, ha, |
| "%s: Fail to write through agent\n", |
| QLA2XXX_DRIVER_NAME); |
| ret = -1; |
| break; |
| } |
| } |
| return ret; |
| } |
| |
| int |
| qla82xx_rdmem(struct qla_hw_data *ha, u64 off, void *data, int size) |
| { |
| int i, j = 0, k, start, end, loop, sz[2], off0[2]; |
| u32 temp; |
| u64 off8, val, mem_crb, word[2] = {0, 0}; |
| #define MAX_CTL_CHECK 1000 |
| |
| /* |
| * If not MN, go check for MS or invalid. |
| */ |
| if (off >= QLA82XX_ADDR_QDR_NET && off <= QLA82XX_P3_ADDR_QDR_NET_MAX) |
| mem_crb = QLA82XX_CRB_QDR_NET; |
| else { |
| mem_crb = QLA82XX_CRB_DDR_NET; |
| if (qla82xx_pci_mem_bound_check(ha, off, size) == 0) |
| return qla82xx_pci_mem_read_direct(ha, off, |
| data, size); |
| } |
| |
| off8 = off & 0xfffffff8; |
| off0[0] = off & 0x7; |
| off0[1] = 0; |
| sz[0] = (size < (8 - off0[0])) ? size : (8 - off0[0]); |
| sz[1] = size - sz[0]; |
| loop = ((off0[0] + size - 1) >> 3) + 1; |
| |
| for (i = 0; i < loop; i++) { |
| temp = off8 + (i << 3); |
| qla82xx_wr_32(ha, mem_crb + MIU_TEST_AGT_ADDR_LO, temp); |
| temp = 0; |
| qla82xx_wr_32(ha, mem_crb + MIU_TEST_AGT_ADDR_HI, temp); |
| temp = MIU_TA_CTL_ENABLE; |
| qla82xx_wr_32(ha, mem_crb + MIU_TEST_AGT_CTRL, temp); |
| temp = MIU_TA_CTL_START | MIU_TA_CTL_ENABLE; |
| qla82xx_wr_32(ha, mem_crb + MIU_TEST_AGT_CTRL, temp); |
| |
| for (j = 0; j < MAX_CTL_CHECK; j++) { |
| temp = qla82xx_rd_32(ha, mem_crb + MIU_TEST_AGT_CTRL); |
| if ((temp & MIU_TA_CTL_BUSY) == 0) |
| break; |
| } |
| |
| if (j >= MAX_CTL_CHECK) { |
| qla_printk(KERN_INFO, ha, |
| "%s: Fail to read through agent\n", |
| QLA2XXX_DRIVER_NAME); |
| break; |
| } |
| |
| start = off0[i] >> 2; |
| end = (off0[i] + sz[i] - 1) >> 2; |
| for (k = start; k <= end; k++) { |
| temp = qla82xx_rd_32(ha, |
| mem_crb + MIU_TEST_AGT_RDDATA(k)); |
| word[i] |= ((u64)temp << (32 * k)); |
| } |
| } |
| |
| if (j >= MAX_CTL_CHECK) |
| return -1; |
| |
| if (sz[0] == 8) { |
| val = word[0]; |
| } else { |
| val = ((word[0] >> (off0[0] * 8)) & (~(~0ULL << (sz[0] * 8)))) | |
| ((word[1] & (~(~0ULL << (sz[1] * 8)))) << (sz[0] * 8)); |
| } |
| |
| switch (size) { |
| case 1: |
| *(u8 *)data = val; |
| break; |
| case 2: |
| *(u16 *)data = val; |
| break; |
| case 4: |
| *(u32 *)data = val; |
| break; |
| case 8: |
| *(u64 *)data = val; |
| break; |
| } |
| return 0; |
| } |
| |
| #define MTU_FUDGE_FACTOR 100 |
| unsigned long qla82xx_decode_crb_addr(unsigned long addr) |
| { |
| int i; |
| unsigned long base_addr, offset, pci_base; |
| |
| if (!qla82xx_crb_table_initialized) |
| qla82xx_crb_addr_transform_setup(); |
| |
| pci_base = ADDR_ERROR; |
| base_addr = addr & 0xfff00000; |
| offset = addr & 0x000fffff; |
| |
| for (i = 0; i < MAX_CRB_XFORM; i++) { |
| if (crb_addr_xform[i] == base_addr) { |
| pci_base = i << 20; |
| break; |
| } |
| } |
| if (pci_base == ADDR_ERROR) |
| return pci_base; |
| return pci_base + offset; |
| } |
| |
| static long rom_max_timeout = 100; |
| static long qla82xx_rom_lock_timeout = 100; |
| |
| int |
| qla82xx_rom_lock(struct qla_hw_data *ha) |
| { |
| int done = 0, timeout = 0; |
| |
| while (!done) { |
| /* acquire semaphore2 from PCI HW block */ |
| done = qla82xx_rd_32(ha, QLA82XX_PCIE_REG(PCIE_SEM2_LOCK)); |
| if (done == 1) |
| break; |
| if (timeout >= qla82xx_rom_lock_timeout) |
| return -1; |
| timeout++; |
| } |
| qla82xx_wr_32(ha, QLA82XX_ROM_LOCK_ID, ROM_LOCK_DRIVER); |
| return 0; |
| } |
| |
| int |
| qla82xx_wait_rom_busy(struct qla_hw_data *ha) |
| { |
| long timeout = 0; |
| long done = 0 ; |
| |
| while (done == 0) { |
| done = qla82xx_rd_32(ha, QLA82XX_ROMUSB_GLB_STATUS); |
| done &= 4; |
| timeout++; |
| if (timeout >= rom_max_timeout) { |
| DEBUG(qla_printk(KERN_INFO, ha, |
| "%s: Timeout reached waiting for rom busy", |
| QLA2XXX_DRIVER_NAME)); |
| return -1; |
| } |
| } |
| return 0; |
| } |
| |
| int |
| qla82xx_wait_rom_done(struct qla_hw_data *ha) |
| { |
| long timeout = 0; |
| long done = 0 ; |
| |
| while (done == 0) { |
| done = qla82xx_rd_32(ha, QLA82XX_ROMUSB_GLB_STATUS); |
| done &= 2; |
| timeout++; |
| if (timeout >= rom_max_timeout) { |
| DEBUG(qla_printk(KERN_INFO, ha, |
| "%s: Timeout reached waiting for rom done", |
| QLA2XXX_DRIVER_NAME)); |
| return -1; |
| } |
| } |
| return 0; |
| } |
| |
| int |
| qla82xx_do_rom_fast_read(struct qla_hw_data *ha, int addr, int *valp) |
| { |
| qla82xx_wr_32(ha, QLA82XX_ROMUSB_ROM_ADDRESS, addr); |
| qla82xx_wr_32(ha, QLA82XX_ROMUSB_ROM_DUMMY_BYTE_CNT, 0); |
| qla82xx_wr_32(ha, QLA82XX_ROMUSB_ROM_ABYTE_CNT, 3); |
| qla82xx_wr_32(ha, QLA82XX_ROMUSB_ROM_INSTR_OPCODE, 0xb); |
| qla82xx_wait_rom_busy(ha); |
| if (qla82xx_wait_rom_done(ha)) { |
| qla_printk(KERN_WARNING, ha, |
| "%s: Error waiting for rom done\n", |
| QLA2XXX_DRIVER_NAME); |
| return -1; |
| } |
| /* Reset abyte_cnt and dummy_byte_cnt */ |
| qla82xx_wr_32(ha, QLA82XX_ROMUSB_ROM_DUMMY_BYTE_CNT, 0); |
| udelay(10); |
| cond_resched(); |
| qla82xx_wr_32(ha, QLA82XX_ROMUSB_ROM_ABYTE_CNT, 0); |
| *valp = qla82xx_rd_32(ha, QLA82XX_ROMUSB_ROM_RDATA); |
| return 0; |
| } |
| |
| int |
| qla82xx_rom_fast_read(struct qla_hw_data *ha, int addr, int *valp) |
| { |
| int ret, loops = 0; |
| |
| while ((qla82xx_rom_lock(ha) != 0) && (loops < 50000)) { |
| udelay(100); |
| schedule(); |
| loops++; |
| } |
| if (loops >= 50000) { |
| qla_printk(KERN_INFO, ha, |
| "%s: qla82xx_rom_lock failed\n", |
| QLA2XXX_DRIVER_NAME); |
| return -1; |
| } |
| ret = qla82xx_do_rom_fast_read(ha, addr, valp); |
| qla82xx_rd_32(ha, QLA82XX_PCIE_REG(PCIE_SEM2_UNLOCK)); |
| return ret; |
| } |
| |
| int |
| qla82xx_read_status_reg(struct qla_hw_data *ha, uint32_t *val) |
| { |
| qla82xx_wr_32(ha, QLA82XX_ROMUSB_ROM_INSTR_OPCODE, M25P_INSTR_RDSR); |
| qla82xx_wait_rom_busy(ha); |
| if (qla82xx_wait_rom_done(ha)) { |
| qla_printk(KERN_WARNING, ha, |
| "Error waiting for rom done\n"); |
| return -1; |
| } |
| *val = qla82xx_rd_32(ha, QLA82XX_ROMUSB_ROM_RDATA); |
| return 0; |
| } |
| |
| int |
| qla82xx_flash_wait_write_finish(struct qla_hw_data *ha) |
| { |
| long timeout = 0; |
| uint32_t done = 1 ; |
| uint32_t val; |
| int ret = 0; |
| |
| qla82xx_wr_32(ha, QLA82XX_ROMUSB_ROM_ABYTE_CNT, 0); |
| while ((done != 0) && (ret == 0)) { |
| ret = qla82xx_read_status_reg(ha, &val); |
| done = val & 1; |
| timeout++; |
| udelay(10); |
| cond_resched(); |
| if (timeout >= 50000) { |
| qla_printk(KERN_WARNING, ha, |
| "Timeout reached waiting for write finish"); |
| return -1; |
| } |
| } |
| return ret; |
| } |
| |
| int |
| qla82xx_flash_set_write_enable(struct qla_hw_data *ha) |
| { |
| uint32_t val; |
| qla82xx_wait_rom_busy(ha); |
| qla82xx_wr_32(ha, QLA82XX_ROMUSB_ROM_ABYTE_CNT, 0); |
| qla82xx_wr_32(ha, QLA82XX_ROMUSB_ROM_INSTR_OPCODE, M25P_INSTR_WREN); |
| qla82xx_wait_rom_busy(ha); |
| if (qla82xx_wait_rom_done(ha)) |
| return -1; |
| if (qla82xx_read_status_reg(ha, &val) != 0) |
| return -1; |
| if ((val & 2) != 2) |
| return -1; |
| return 0; |
| } |
| |
| int |
| qla82xx_write_status_reg(struct qla_hw_data *ha, uint32_t val) |
| { |
| if (qla82xx_flash_set_write_enable(ha)) |
| return -1; |
| qla82xx_wr_32(ha, QLA82XX_ROMUSB_ROM_WDATA, val); |
| qla82xx_wr_32(ha, QLA82XX_ROMUSB_ROM_INSTR_OPCODE, 0x1); |
| if (qla82xx_wait_rom_done(ha)) { |
| qla_printk(KERN_WARNING, ha, |
| "Error waiting for rom done\n"); |
| return -1; |
| } |
| return qla82xx_flash_wait_write_finish(ha); |
| } |
| |
| int |
| qla82xx_write_disable_flash(struct qla_hw_data *ha) |
| { |
| qla82xx_wr_32(ha, QLA82XX_ROMUSB_ROM_INSTR_OPCODE, M25P_INSTR_WRDI); |
| if (qla82xx_wait_rom_done(ha)) { |
| qla_printk(KERN_WARNING, ha, |
| "Error waiting for rom done\n"); |
| return -1; |
| } |
| return 0; |
| } |
| |
| int |
| ql82xx_rom_lock_d(struct qla_hw_data *ha) |
| { |
| int loops = 0; |
| while ((qla82xx_rom_lock(ha) != 0) && (loops < 50000)) { |
| udelay(100); |
| cond_resched(); |
| loops++; |
| } |
| if (loops >= 50000) { |
| qla_printk(KERN_WARNING, ha, "ROM lock failed\n"); |
| return -1; |
| } |
| return 0;; |
| } |
| |
| int |
| qla82xx_write_flash_dword(struct qla_hw_data *ha, uint32_t flashaddr, |
| uint32_t data) |
| { |
| int ret = 0; |
| |
| ret = ql82xx_rom_lock_d(ha); |
| if (ret < 0) { |
| qla_printk(KERN_WARNING, ha, "ROM Lock failed\n"); |
| return ret; |
| } |
| |
| if (qla82xx_flash_set_write_enable(ha)) |
| goto done_write; |
| |
| qla82xx_wr_32(ha, QLA82XX_ROMUSB_ROM_WDATA, data); |
| qla82xx_wr_32(ha, QLA82XX_ROMUSB_ROM_ADDRESS, flashaddr); |
| qla82xx_wr_32(ha, QLA82XX_ROMUSB_ROM_ABYTE_CNT, 3); |
| qla82xx_wr_32(ha, QLA82XX_ROMUSB_ROM_INSTR_OPCODE, M25P_INSTR_PP); |
| qla82xx_wait_rom_busy(ha); |
| if (qla82xx_wait_rom_done(ha)) { |
| qla_printk(KERN_WARNING, ha, |
| "Error waiting for rom done\n"); |
| ret = -1; |
| goto done_write; |
| } |
| |
| ret = qla82xx_flash_wait_write_finish(ha); |
| |
| done_write: |
| qla82xx_rd_32(ha, QLA82XX_PCIE_REG(PCIE_SEM2_UNLOCK)); |
| return ret; |
| } |
| |
| /* This routine does CRB initialize sequence |
| * to put the ISP into operational state |
| */ |
| int qla82xx_pinit_from_rom(scsi_qla_host_t *vha) |
| { |
| int addr, val; |
| int i ; |
| struct crb_addr_pair *buf; |
| unsigned long off; |
| unsigned offset, n; |
| struct qla_hw_data *ha = vha->hw; |
| |
| struct crb_addr_pair { |
| long addr; |
| long data; |
| }; |
| |
| /* Halt all the indiviual PEGs and other blocks of the ISP */ |
| qla82xx_rom_lock(ha); |
| if (test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags)) |
| /* don't reset CAM block on reset */ |
| qla82xx_wr_32(ha, QLA82XX_ROMUSB_GLB_SW_RESET, 0xfeffffff); |
| else |
| qla82xx_wr_32(ha, QLA82XX_ROMUSB_GLB_SW_RESET, 0xffffffff); |
| qla82xx_rd_32(ha, QLA82XX_PCIE_REG(PCIE_SEM2_UNLOCK)); |
| |
| /* Read the signature value from the flash. |
| * Offset 0: Contain signature (0xcafecafe) |
| * Offset 4: Offset and number of addr/value pairs |
| * that present in CRB initialize sequence |
| */ |
| if (qla82xx_rom_fast_read(ha, 0, &n) != 0 || n != 0xcafecafeUL || |
| qla82xx_rom_fast_read(ha, 4, &n) != 0) { |
| qla_printk(KERN_WARNING, ha, |
| "[ERROR] Reading crb_init area: n: %08x\n", n); |
| return -1; |
| } |
| |
| /* Offset in flash = lower 16 bits |
| * Number of enteries = upper 16 bits |
| */ |
| offset = n & 0xffffU; |
| n = (n >> 16) & 0xffffU; |
| |
| /* number of addr/value pair should not exceed 1024 enteries */ |
| if (n >= 1024) { |
| qla_printk(KERN_WARNING, ha, |
| "%s: %s:n=0x%x [ERROR] Card flash not initialized.\n", |
| QLA2XXX_DRIVER_NAME, __func__, n); |
| return -1; |
| } |
| |
| qla_printk(KERN_INFO, ha, |
| "%s: %d CRB init values found in ROM.\n", QLA2XXX_DRIVER_NAME, n); |
| |
| buf = kmalloc(n * sizeof(struct crb_addr_pair), GFP_KERNEL); |
| if (buf == NULL) { |
| qla_printk(KERN_WARNING, ha, |
| "%s: [ERROR] Unable to malloc memory.\n", |
| QLA2XXX_DRIVER_NAME); |
| return -1; |
| } |
| |
| for (i = 0; i < n; i++) { |
| if (qla82xx_rom_fast_read(ha, 8*i + 4*offset, &val) != 0 || |
| qla82xx_rom_fast_read(ha, 8*i + 4*offset + 4, &addr) != 0) { |
| kfree(buf); |
| return -1; |
| } |
| |
| buf[i].addr = addr; |
| buf[i].data = val; |
| } |
| |
| for (i = 0; i < n; i++) { |
| /* Translate internal CRB initialization |
| * address to PCI bus address |
| */ |
| off = qla82xx_decode_crb_addr((unsigned long)buf[i].addr) + |
| QLA82XX_PCI_CRBSPACE; |
| /* Not all CRB addr/value pair to be written, |
| * some of them are skipped |
| */ |
| |
| /* skipping cold reboot MAGIC */ |
| if (off == QLA82XX_CAM_RAM(0x1fc)) |
| continue; |
| |
| /* do not reset PCI */ |
| if (off == (ROMUSB_GLB + 0xbc)) |
| continue; |
| |
| /* skip core clock, so that firmware can increase the clock */ |
| if (off == (ROMUSB_GLB + 0xc8)) |
| continue; |
| |
| /* skip the function enable register */ |
| if (off == QLA82XX_PCIE_REG(PCIE_SETUP_FUNCTION)) |
| continue; |
| |
| if (off == QLA82XX_PCIE_REG(PCIE_SETUP_FUNCTION2)) |
| continue; |
| |
| if ((off & 0x0ff00000) == QLA82XX_CRB_SMB) |
| continue; |
| |
| if ((off & 0x0ff00000) == QLA82XX_CRB_DDR_NET) |
| continue; |
| |
| if (off == ADDR_ERROR) { |
| qla_printk(KERN_WARNING, ha, |
| "%s: [ERROR] Unknown addr: 0x%08lx\n", |
| QLA2XXX_DRIVER_NAME, buf[i].addr); |
| continue; |
| } |
| |
| if (off == (QLA82XX_CRB_PEG_NET_1 + 0x18)) { |
| if (!QLA82XX_IS_REVISION_P3PLUS(ha->chip_revision)) |
| buf[i].data = 0x1020; |
| } |
| |
| qla82xx_wr_32(ha, off, buf[i].data); |
| |
| /* ISP requires much bigger delay to settle down, |
| * else crb_window returns 0xffffffff |
| */ |
| if (off == QLA82XX_ROMUSB_GLB_SW_RESET) |
| msleep(1000); |
| |
| /* ISP requires millisec delay between |
| * successive CRB register updation |
| */ |
| msleep(1); |
| } |
| |
| kfree(buf); |
| |
| /* Resetting the data and instruction cache */ |
| qla82xx_wr_32(ha, QLA82XX_CRB_PEG_NET_D+0xec, 0x1e); |
| qla82xx_wr_32(ha, QLA82XX_CRB_PEG_NET_D+0x4c, 8); |
| qla82xx_wr_32(ha, QLA82XX_CRB_PEG_NET_I+0x4c, 8); |
| |
| /* Clear all protocol processing engines */ |
| qla82xx_wr_32(ha, QLA82XX_CRB_PEG_NET_0+0x8, 0); |
| qla82xx_wr_32(ha, QLA82XX_CRB_PEG_NET_0+0xc, 0); |
| qla82xx_wr_32(ha, QLA82XX_CRB_PEG_NET_1+0x8, 0); |
| qla82xx_wr_32(ha, QLA82XX_CRB_PEG_NET_1+0xc, 0); |
| qla82xx_wr_32(ha, QLA82XX_CRB_PEG_NET_2+0x8, 0); |
| qla82xx_wr_32(ha, QLA82XX_CRB_PEG_NET_2+0xc, 0); |
| qla82xx_wr_32(ha, QLA82XX_CRB_PEG_NET_3+0x8, 0); |
| qla82xx_wr_32(ha, QLA82XX_CRB_PEG_NET_3+0xc, 0); |
| return 0; |
| } |
| |
| int qla82xx_check_for_bad_spd(struct qla_hw_data *ha) |
| { |
| u32 val = 0; |
| val = qla82xx_rd_32(ha, BOOT_LOADER_DIMM_STATUS); |
| val &= QLA82XX_BOOT_LOADER_MN_ISSUE; |
| if (val & QLA82XX_PEG_TUNE_MN_SPD_ZEROED) { |
| qla_printk(KERN_INFO, ha, |
| "Memory DIMM SPD not programmed. " |
| " Assumed valid.\n"); |
| return 1; |
| } else if (val) { |
| qla_printk(KERN_INFO, ha, |
| "Memory DIMM type incorrect.Info:%08X.\n", val); |
| return 2; |
| } |
| return 0; |
| } |
| |
| int |
| qla82xx_fw_load_from_flash(struct qla_hw_data *ha) |
| { |
| int i; |
| long size = 0; |
| long flashaddr = BOOTLD_START, memaddr = BOOTLD_START; |
| u64 data; |
| u32 high, low; |
| size = (IMAGE_START - BOOTLD_START) / 8; |
| |
| for (i = 0; i < size; i++) { |
| if ((qla82xx_rom_fast_read(ha, flashaddr, (int *)&low)) || |
| (qla82xx_rom_fast_read(ha, flashaddr + 4, (int *)&high))) { |
| return -1; |
| } |
| data = ((u64)high << 32) | low ; |
| qla82xx_pci_mem_write_2M(ha, memaddr, &data, 8); |
| flashaddr += 8; |
| memaddr += 8; |
| |
| if (i % 0x1000 == 0) |
| msleep(1); |
| } |
| udelay(100); |
| read_lock(&ha->hw_lock); |
| if (QLA82XX_IS_REVISION_P3PLUS(ha->chip_revision)) { |
| qla82xx_wr_32(ha, QLA82XX_CRB_PEG_NET_0 + 0x18, 0x1020); |
| qla82xx_wr_32(ha, QLA82XX_ROMUSB_GLB_SW_RESET, 0x80001e); |
| } else { |
| qla82xx_wr_32(ha, QLA82XX_ROMUSB_GLB_SW_RESET, 0x80001d); |
| } |
| read_unlock(&ha->hw_lock); |
| return 0; |
| } |
| |
| int |
| qla82xx_pci_mem_read_2M(struct qla_hw_data *ha, |
| u64 off, void *data, int size) |
| { |
| int i, j = 0, k, start, end, loop, sz[2], off0[2]; |
| int shift_amount; |
| uint32_t temp; |
| uint64_t off8, val, mem_crb, word[2] = {0, 0}; |
| |
| /* |
| * If not MN, go check for MS or invalid. |
| */ |
| |
| if (off >= QLA82XX_ADDR_QDR_NET && off <= QLA82XX_P3_ADDR_QDR_NET_MAX) |
| mem_crb = QLA82XX_CRB_QDR_NET; |
| else { |
| mem_crb = QLA82XX_CRB_DDR_NET; |
| if (qla82xx_pci_mem_bound_check(ha, off, size) == 0) |
| return qla82xx_pci_mem_read_direct(ha, |
| off, data, size); |
| } |
| |
| if (QLA82XX_IS_REVISION_P3PLUS(ha->chip_revision)) { |
| off8 = off & 0xfffffff0; |
| off0[0] = off & 0xf; |
| sz[0] = (size < (16 - off0[0])) ? size : (16 - off0[0]); |
| shift_amount = 4; |
| } else { |
| off8 = off & 0xfffffff8; |
| off0[0] = off & 0x7; |
| sz[0] = (size < (8 - off0[0])) ? size : (8 - off0[0]); |
| shift_amount = 4; |
| } |
| loop = ((off0[0] + size - 1) >> shift_amount) + 1; |
| off0[1] = 0; |
| sz[1] = size - sz[0]; |
| |
| /* |
| * don't lock here - write_wx gets the lock if each time |
| * write_lock_irqsave(&adapter->adapter_lock, flags); |
| * netxen_nic_pci_change_crbwindow_128M(adapter, 0); |
| */ |
| |
| for (i = 0; i < loop; i++) { |
| temp = off8 + (i << shift_amount); |
| qla82xx_wr_32(ha, mem_crb + MIU_TEST_AGT_ADDR_LO, temp); |
| temp = 0; |
| qla82xx_wr_32(ha, mem_crb + MIU_TEST_AGT_ADDR_HI, temp); |
| temp = MIU_TA_CTL_ENABLE; |
| qla82xx_wr_32(ha, mem_crb + MIU_TEST_AGT_CTRL, temp); |
| temp = MIU_TA_CTL_START | MIU_TA_CTL_ENABLE; |
| qla82xx_wr_32(ha, mem_crb + MIU_TEST_AGT_CTRL, temp); |
| |
| for (j = 0; j < MAX_CTL_CHECK; j++) { |
| temp = qla82xx_rd_32(ha, mem_crb + MIU_TEST_AGT_CTRL); |
| if ((temp & MIU_TA_CTL_BUSY) == 0) |
| break; |
| } |
| |
| if (j >= MAX_CTL_CHECK) { |
| if (printk_ratelimit()) |
| dev_err(&ha->pdev->dev, |
| "failed to read through agent\n"); |
| break; |
| } |
| |
| start = off0[i] >> 2; |
| end = (off0[i] + sz[i] - 1) >> 2; |
| for (k = start; k <= end; k++) { |
| temp = qla82xx_rd_32(ha, |
| mem_crb + MIU_TEST_AGT_RDDATA(k)); |
| word[i] |= ((uint64_t)temp << (32 * (k & 1))); |
| } |
| } |
| |
| /* |
| * netxen_nic_pci_change_crbwindow_128M(adapter, 1); |
| * write_unlock_irqrestore(&adapter->adapter_lock, flags); |
| */ |
| |
| if (j >= MAX_CTL_CHECK) |
| return -1; |
| |
| if ((off0[0] & 7) == 0) { |
| val = word[0]; |
| } else { |
| val = ((word[0] >> (off0[0] * 8)) & (~(~0ULL << (sz[0] * 8)))) | |
| ((word[1] & (~(~0ULL << (sz[1] * 8)))) << (sz[0] * 8)); |
| } |
| |
| switch (size) { |
| case 1: |
| *(uint8_t *)data = val; |
| break; |
| case 2: |
| *(uint16_t *)data = val; |
| break; |
| case 4: |
| *(uint32_t *)data = val; |
| break; |
| case 8: |
| *(uint64_t *)data = val; |
| break; |
| } |
| return 0; |
| } |
| |
| int |
| qla82xx_pci_mem_write_2M(struct qla_hw_data *ha, |
| u64 off, void *data, int size) |
| { |
| int i, j, ret = 0, loop, sz[2], off0; |
| int scale, shift_amount, p3p, startword; |
| uint32_t temp; |
| uint64_t off8, mem_crb, tmpw, word[2] = {0, 0}; |
| |
| /* |
| * If not MN, go check for MS or invalid. |
| */ |
| if (off >= QLA82XX_ADDR_QDR_NET && off <= QLA82XX_P3_ADDR_QDR_NET_MAX) |
| mem_crb = QLA82XX_CRB_QDR_NET; |
| else { |
| mem_crb = QLA82XX_CRB_DDR_NET; |
| if (qla82xx_pci_mem_bound_check(ha, off, size) == 0) |
| return qla82xx_pci_mem_write_direct(ha, |
| off, data, size); |
| } |
| |
| off0 = off & 0x7; |
| sz[0] = (size < (8 - off0)) ? size : (8 - off0); |
| sz[1] = size - sz[0]; |
| |
| if (QLA82XX_IS_REVISION_P3PLUS(ha->chip_revision)) { |
| off8 = off & 0xfffffff0; |
| loop = (((off & 0xf) + size - 1) >> 4) + 1; |
| shift_amount = 4; |
| scale = 2; |
| p3p = 1; |
| startword = (off & 0xf)/8; |
| } else { |
| off8 = off & 0xfffffff8; |
| loop = ((off0 + size - 1) >> 3) + 1; |
| shift_amount = 3; |
| scale = 1; |
| p3p = 0; |
| startword = 0; |
| } |
| |
| if (p3p || (size != 8) || (off0 != 0)) { |
| for (i = 0; i < loop; i++) { |
| if (qla82xx_pci_mem_read_2M(ha, off8 + |
| (i << shift_amount), &word[i * scale], 8)) |
| return -1; |
| } |
| } |
| |
| switch (size) { |
| case 1: |
| tmpw = *((uint8_t *)data); |
| break; |
| case 2: |
| tmpw = *((uint16_t *)data); |
| break; |
| case 4: |
| tmpw = *((uint32_t *)data); |
| break; |
| case 8: |
| default: |
| tmpw = *((uint64_t *)data); |
| break; |
| } |
| |
| if (QLA82XX_IS_REVISION_P3PLUS(ha->chip_revision)) { |
| if (sz[0] == 8) { |
| word[startword] = tmpw; |
| } else { |
| word[startword] &= |
| ~((~(~0ULL << (sz[0] * 8))) << (off0 * 8)); |
| word[startword] |= tmpw << (off0 * 8); |
| } |
| if (sz[1] != 0) { |
| word[startword+1] &= ~(~0ULL << (sz[1] * 8)); |
| word[startword+1] |= tmpw >> (sz[0] * 8); |
| } |
| } else { |
| word[startword] &= ~((~(~0ULL << (sz[0] * 8))) << (off0 * 8)); |
| word[startword] |= tmpw << (off0 * 8); |
| |
| if (loop == 2) { |
| word[1] &= ~(~0ULL << (sz[1] * 8)); |
| word[1] |= tmpw >> (sz[0] * 8); |
| } |
| } |
| |
| /* |
| * don't lock here - write_wx gets the lock if each time |
| * write_lock_irqsave(&adapter->adapter_lock, flags); |
| * netxen_nic_pci_change_crbwindow_128M(adapter, 0); |
| */ |
| for (i = 0; i < loop; i++) { |
| temp = off8 + (i << shift_amount); |
| qla82xx_wr_32(ha, mem_crb+MIU_TEST_AGT_ADDR_LO, temp); |
| temp = 0; |
| qla82xx_wr_32(ha, mem_crb+MIU_TEST_AGT_ADDR_HI, temp); |
| temp = word[i * scale] & 0xffffffff; |
| qla82xx_wr_32(ha, mem_crb+MIU_TEST_AGT_WRDATA_LO, temp); |
| temp = (word[i * scale] >> 32) & 0xffffffff; |
| qla82xx_wr_32(ha, mem_crb+MIU_TEST_AGT_WRDATA_HI, temp); |
| if (QLA82XX_IS_REVISION_P3PLUS(ha->chip_revision)) { |
| temp = word[i*scale + 1] & 0xffffffff; |
| qla82xx_wr_32(ha, mem_crb + |
| MIU_TEST_AGT_WRDATA_UPPER_LO, temp); |
| temp = (word[i*scale + 1] >> 32) & 0xffffffff; |
| qla82xx_wr_32(ha, mem_crb + |
| MIU_TEST_AGT_WRDATA_UPPER_HI, temp); |
| } |
| |
| temp = MIU_TA_CTL_ENABLE | MIU_TA_CTL_WRITE; |
| qla82xx_wr_32(ha, mem_crb + MIU_TEST_AGT_CTRL, temp); |
| temp = MIU_TA_CTL_START | MIU_TA_CTL_ENABLE | MIU_TA_CTL_WRITE; |
| qla82xx_wr_32(ha, mem_crb + MIU_TEST_AGT_CTRL, temp); |
| |
| for (j = 0; j < MAX_CTL_CHECK; j++) { |
| temp = qla82xx_rd_32(ha, mem_crb + MIU_TEST_AGT_CTRL); |
| if ((temp & MIU_TA_CTL_BUSY) == 0) |
| break; |
| } |
| |
| if (j >= MAX_CTL_CHECK) { |
| if (printk_ratelimit()) |
| dev_err(&ha->pdev->dev, |
| "failed to write through agent\n"); |
| ret = -1; |
| break; |
| } |
| } |
| |
| return ret; |
| } |
| |
| /* PCI related functions */ |
| char * |
| qla82xx_pci_info_str(struct scsi_qla_host *vha, char *str) |
| { |
| int pcie_reg; |
| struct qla_hw_data *ha = vha->hw; |
| char lwstr[6]; |
| uint16_t lnk; |
| |
| pcie_reg = pci_find_capability(ha->pdev, PCI_CAP_ID_EXP); |
| pci_read_config_word(ha->pdev, pcie_reg + PCI_EXP_LNKSTA, &lnk); |
| ha->link_width = (lnk >> 4) & 0x3f; |
| |
| strcpy(str, "PCIe ("); |
| strcat(str, "2.5Gb/s "); |
| snprintf(lwstr, sizeof(lwstr), "x%d)", ha->link_width); |
| strcat(str, lwstr); |
| return str; |
| } |
| |
| int qla82xx_pci_region_offset(struct pci_dev *pdev, int region) |
| { |
| unsigned long val = 0; |
| u32 control; |
| |
| switch (region) { |
| case 0: |
| val = 0; |
| break; |
| case 1: |
| pci_read_config_dword(pdev, QLA82XX_PCI_REG_MSIX_TBL, &control); |
| val = control + QLA82XX_MSIX_TBL_SPACE; |
| break; |
| } |
| return val; |
| } |
| |
| int qla82xx_pci_region_len(struct pci_dev *pdev, int region) |
| { |
| unsigned long val = 0; |
| u32 control; |
| switch (region) { |
| case 0: |
| pci_read_config_dword(pdev, QLA82XX_PCI_REG_MSIX_TBL, &control); |
| val = control; |
| break; |
| case 1: |
| val = pci_resource_len(pdev, 0) - |
| qla82xx_pci_region_offset(pdev, 1); |
| break; |
| } |
| return val; |
| } |
| |
| int |
| qla82xx_iospace_config(struct qla_hw_data *ha) |
| { |
| uint32_t len = 0; |
| |
| if (pci_request_regions(ha->pdev, QLA2XXX_DRIVER_NAME)) { |
| qla_printk(KERN_WARNING, ha, |
| "Failed to reserve selected regions (%s)\n", |
| pci_name(ha->pdev)); |
| goto iospace_error_exit; |
| } |
| |
| /* Use MMIO operations for all accesses. */ |
| if (!(pci_resource_flags(ha->pdev, 0) & IORESOURCE_MEM)) { |
| qla_printk(KERN_ERR, ha, |
| "region #0 not an MMIO resource (%s), aborting\n", |
| pci_name(ha->pdev)); |
| goto iospace_error_exit; |
| } |
| |
| len = pci_resource_len(ha->pdev, 0); |
| ha->nx_pcibase = |
| (unsigned long)ioremap(pci_resource_start(ha->pdev, 0), len); |
| if (!ha->nx_pcibase) { |
| qla_printk(KERN_ERR, ha, |
| "cannot remap pcibase MMIO (%s), aborting\n", |
| pci_name(ha->pdev)); |
| pci_release_regions(ha->pdev); |
| goto iospace_error_exit; |
| } |
| |
| /* Mapping of IO base pointer */ |
| ha->iobase = (device_reg_t __iomem *)((uint8_t *)ha->nx_pcibase + |
| 0xbc000 + (ha->pdev->devfn << 11)); |
| |
| if (!ql2xdbwr) { |
| ha->nxdb_wr_ptr = |
| (unsigned long)ioremap((pci_resource_start(ha->pdev, 4) + |
| (ha->pdev->devfn << 12)), 4); |
| if (!ha->nxdb_wr_ptr) { |
| qla_printk(KERN_ERR, ha, |
| "cannot remap MMIO (%s), aborting\n", |
| pci_name(ha->pdev)); |
| pci_release_regions(ha->pdev); |
| goto iospace_error_exit; |
| } |
| |
| /* Mapping of IO base pointer, |
| * door bell read and write pointer |
| */ |
| ha->nxdb_rd_ptr = (uint8_t *) ha->nx_pcibase + (512 * 1024) + |
| (ha->pdev->devfn * 8); |
| } else { |
| ha->nxdb_wr_ptr = (ha->pdev->devfn == 6 ? |
| QLA82XX_CAMRAM_DB1 : |
| QLA82XX_CAMRAM_DB2); |
| } |
| |
| ha->max_req_queues = ha->max_rsp_queues = 1; |
| ha->msix_count = ha->max_rsp_queues + 1; |
| return 0; |
| |
| iospace_error_exit: |
| return -ENOMEM; |
| } |
| |
| /* GS related functions */ |
| |
| /* Initialization related functions */ |
| |
| /** |
| * qla82xx_pci_config() - Setup ISP82xx PCI configuration registers. |
| * @ha: HA context |
| * |
| * Returns 0 on success. |
| */ |
| int |
| qla82xx_pci_config(scsi_qla_host_t *vha) |
| { |
| struct qla_hw_data *ha = vha->hw; |
| int ret; |
| |
| pci_set_master(ha->pdev); |
| ret = pci_set_mwi(ha->pdev); |
| ha->chip_revision = ha->pdev->revision; |
| return 0; |
| } |
| |
| /** |
| * qla82xx_reset_chip() - Setup ISP82xx PCI configuration registers. |
| * @ha: HA context |
| * |
| * Returns 0 on success. |
| */ |
| void |
| qla82xx_reset_chip(scsi_qla_host_t *vha) |
| { |
| struct qla_hw_data *ha = vha->hw; |
| ha->isp_ops->disable_intrs(ha); |
| } |
| |
| void qla82xx_config_rings(struct scsi_qla_host *vha) |
| { |
| struct qla_hw_data *ha = vha->hw; |
| struct device_reg_82xx __iomem *reg = &ha->iobase->isp82; |
| struct init_cb_81xx *icb; |
| struct req_que *req = ha->req_q_map[0]; |
| struct rsp_que *rsp = ha->rsp_q_map[0]; |
| |
| /* Setup ring parameters in initialization control block. */ |
| icb = (struct init_cb_81xx *)ha->init_cb; |
| icb->request_q_outpointer = __constant_cpu_to_le16(0); |
| icb->response_q_inpointer = __constant_cpu_to_le16(0); |
| icb->request_q_length = cpu_to_le16(req->length); |
| icb->response_q_length = cpu_to_le16(rsp->length); |
| icb->request_q_address[0] = cpu_to_le32(LSD(req->dma)); |
| icb->request_q_address[1] = cpu_to_le32(MSD(req->dma)); |
| icb->response_q_address[0] = cpu_to_le32(LSD(rsp->dma)); |
| icb->response_q_address[1] = cpu_to_le32(MSD(rsp->dma)); |
| |
| icb->version = 1; |
| icb->frame_payload_size = 2112; |
| icb->execution_throttle = 8; |
| icb->exchange_count = 128; |
| icb->login_retry_count = 8; |
| |
| WRT_REG_DWORD((unsigned long __iomem *)®->req_q_out[0], 0); |
| WRT_REG_DWORD((unsigned long __iomem *)®->rsp_q_in[0], 0); |
| WRT_REG_DWORD((unsigned long __iomem *)®->rsp_q_out[0], 0); |
| } |
| |
| void qla82xx_reset_adapter(struct scsi_qla_host *vha) |
| { |
| struct qla_hw_data *ha = vha->hw; |
| vha->flags.online = 0; |
| qla2x00_try_to_stop_firmware(vha); |
| ha->isp_ops->disable_intrs(ha); |
| } |
| |
| int qla82xx_fw_load_from_blob(struct qla_hw_data *ha) |
| { |
| u64 *ptr64; |
| u32 i, flashaddr, size; |
| __le64 data; |
| |
| size = (IMAGE_START - BOOTLD_START) / 8; |
| |
| ptr64 = (u64 *)&ha->hablob->fw->data[BOOTLD_START]; |
| flashaddr = BOOTLD_START; |
| |
| for (i = 0; i < size; i++) { |
| data = cpu_to_le64(ptr64[i]); |
| qla82xx_pci_mem_write_2M(ha, flashaddr, &data, 8); |
| flashaddr += 8; |
| } |
| |
| size = *(u32 *)&ha->hablob->fw->data[FW_SIZE_OFFSET]; |
| size = (__force u32)cpu_to_le32(size) / 8; |
| ptr64 = (u64 *)&ha->hablob->fw->data[IMAGE_START]; |
| flashaddr = FLASH_ADDR_START; |
| |
| for (i = 0; i < size; i++) { |
| data = cpu_to_le64(ptr64[i]); |
| |
| if (qla82xx_pci_mem_write_2M(ha, flashaddr, &data, 8)) |
| return -EIO; |
| flashaddr += 8; |
| } |
| |
| /* Write a magic value to CAMRAM register |
| * at a specified offset to indicate |
| * that all data is written and |
| * ready for firmware to initialize. |
| */ |
| qla82xx_wr_32(ha, QLA82XX_CAM_RAM(0x1fc), 0x12345678); |
| |
| if (QLA82XX_IS_REVISION_P3PLUS(ha->chip_revision)) { |
| qla82xx_wr_32(ha, QLA82XX_CRB_PEG_NET_0 + 0x18, 0x1020); |
| qla82xx_wr_32(ha, QLA82XX_ROMUSB_GLB_SW_RESET, 0x80001e); |
| } else |
| qla82xx_wr_32(ha, QLA82XX_ROMUSB_GLB_SW_RESET, 0x80001d); |
| return 0; |
| } |
| |
| int qla82xx_check_cmdpeg_state(struct qla_hw_data *ha) |
| { |
| u32 val = 0; |
| int retries = 60; |
| |
| do { |
| read_lock(&ha->hw_lock); |
| val = qla82xx_rd_32(ha, CRB_CMDPEG_STATE); |
| read_unlock(&ha->hw_lock); |
| |
| switch (val) { |
| case PHAN_INITIALIZE_COMPLETE: |
| case PHAN_INITIALIZE_ACK: |
| return QLA_SUCCESS; |
| case PHAN_INITIALIZE_FAILED: |
| break; |
| default: |
| break; |
| } |
| qla_printk(KERN_WARNING, ha, |
| "CRB_CMDPEG_STATE: 0x%x and retries: 0x%x\n", |
| val, retries); |
| |
| msleep(500); |
| |
| } while (--retries); |
| |
| qla_printk(KERN_INFO, ha, |
| "Cmd Peg initialization failed: 0x%x.\n", val); |
| |
| qla82xx_check_for_bad_spd(ha); |
| val = qla82xx_rd_32(ha, QLA82XX_ROMUSB_GLB_PEGTUNE_DONE); |
| read_lock(&ha->hw_lock); |
| qla82xx_wr_32(ha, CRB_CMDPEG_STATE, PHAN_INITIALIZE_FAILED); |
| read_unlock(&ha->hw_lock); |
| return QLA_FUNCTION_FAILED; |
| } |
| |
| int qla82xx_check_rcvpeg_state(struct qla_hw_data *ha) |
| { |
| u32 val = 0; |
| int retries = 60; |
| |
| do { |
| read_lock(&ha->hw_lock); |
| val = qla82xx_rd_32(ha, CRB_RCVPEG_STATE); |
| read_unlock(&ha->hw_lock); |
| |
| switch (val) { |
| case PHAN_INITIALIZE_COMPLETE: |
| case PHAN_INITIALIZE_ACK: |
| return QLA_SUCCESS; |
| case PHAN_INITIALIZE_FAILED: |
| break; |
| default: |
| break; |
| } |
| |
| qla_printk(KERN_WARNING, ha, |
| "CRB_RCVPEG_STATE: 0x%x and retries: 0x%x\n", |
| val, retries); |
| |
| msleep(500); |
| |
| } while (--retries); |
| |
| qla_printk(KERN_INFO, ha, |
| "Rcv Peg initialization failed: 0x%x.\n", val); |
| read_lock(&ha->hw_lock); |
| qla82xx_wr_32(ha, CRB_RCVPEG_STATE, PHAN_INITIALIZE_FAILED); |
| read_unlock(&ha->hw_lock); |
| return QLA_FUNCTION_FAILED; |
| } |
| |
| /* ISR related functions */ |
| uint32_t qla82xx_isr_int_target_mask_enable[8] = { |
| ISR_INT_TARGET_MASK, ISR_INT_TARGET_MASK_F1, |
| ISR_INT_TARGET_MASK_F2, ISR_INT_TARGET_MASK_F3, |
| ISR_INT_TARGET_MASK_F4, ISR_INT_TARGET_MASK_F5, |
| ISR_INT_TARGET_MASK_F7, ISR_INT_TARGET_MASK_F7 |
| }; |
| |
| uint32_t qla82xx_isr_int_target_status[8] = { |
| ISR_INT_TARGET_STATUS, ISR_INT_TARGET_STATUS_F1, |
| ISR_INT_TARGET_STATUS_F2, ISR_INT_TARGET_STATUS_F3, |
| ISR_INT_TARGET_STATUS_F4, ISR_INT_TARGET_STATUS_F5, |
| ISR_INT_TARGET_STATUS_F7, ISR_INT_TARGET_STATUS_F7 |
| }; |
| |
| static struct qla82xx_legacy_intr_set legacy_intr[] = \ |
| QLA82XX_LEGACY_INTR_CONFIG; |
| |
| /* |
| * qla82xx_mbx_completion() - Process mailbox command completions. |
| * @ha: SCSI driver HA context |
| * @mb0: Mailbox0 register |
| */ |
| void |
| qla82xx_mbx_completion(scsi_qla_host_t *vha, uint16_t mb0) |
| { |
| uint16_t cnt; |
| uint16_t __iomem *wptr; |
| struct qla_hw_data *ha = vha->hw; |
| struct device_reg_82xx __iomem *reg = &ha->iobase->isp82; |
| wptr = (uint16_t __iomem *)®->mailbox_out[1]; |
| |
| /* Load return mailbox registers. */ |
| ha->flags.mbox_int = 1; |
| ha->mailbox_out[0] = mb0; |
| |
| for (cnt = 1; cnt < ha->mbx_count; cnt++) { |
| ha->mailbox_out[cnt] = RD_REG_WORD(wptr); |
| wptr++; |
| } |
| |
| if (ha->mcp) { |
| DEBUG3_11(printk(KERN_INFO "%s(%ld): " |
| "Got mailbox completion. cmd=%x.\n", |
| __func__, vha->host_no, ha->mcp->mb[0])); |
| } else { |
| qla_printk(KERN_INFO, ha, |
| "%s(%ld): MBX pointer ERROR!\n", |
| __func__, vha->host_no); |
| } |
| } |
| |
| /* |
| * qla82xx_intr_handler() - Process interrupts for the ISP23xx and ISP63xx. |
| * @irq: |
| * @dev_id: SCSI driver HA context |
| * @regs: |
| * |
| * Called by system whenever the host adapter generates an interrupt. |
| * |
| * Returns handled flag. |
| */ |
| irqreturn_t |
| qla82xx_intr_handler(int irq, void *dev_id) |
| { |
| scsi_qla_host_t *vha; |
| struct qla_hw_data *ha; |
| struct rsp_que *rsp; |
| struct device_reg_82xx __iomem *reg; |
| int status = 0, status1 = 0; |
| unsigned long flags; |
| unsigned long iter; |
| uint32_t stat; |
| uint16_t mb[4]; |
| |
| rsp = (struct rsp_que *) dev_id; |
| if (!rsp) { |
| printk(KERN_INFO |
| "%s(): NULL response queue pointer\n", __func__); |
| return IRQ_NONE; |
| } |
| ha = rsp->hw; |
| |
| if (!ha->flags.msi_enabled) { |
| status = qla82xx_rd_32(ha, ISR_INT_VECTOR); |
| if (!(status & ha->nx_legacy_intr.int_vec_bit)) |
| return IRQ_NONE; |
| |
| status1 = qla82xx_rd_32(ha, ISR_INT_STATE_REG); |
| if (!ISR_IS_LEGACY_INTR_TRIGGERED(status1)) |
| return IRQ_NONE; |
| } |
| |
| /* clear the interrupt */ |
| qla82xx_wr_32(ha, ha->nx_legacy_intr.tgt_status_reg, 0xffffffff); |
| |
| /* read twice to ensure write is flushed */ |
| qla82xx_rd_32(ha, ISR_INT_VECTOR); |
| qla82xx_rd_32(ha, ISR_INT_VECTOR); |
| |
| reg = &ha->iobase->isp82; |
| |
| spin_lock_irqsave(&ha->hardware_lock, flags); |
| vha = pci_get_drvdata(ha->pdev); |
| for (iter = 1; iter--; ) { |
| |
| if (RD_REG_DWORD(®->host_int)) { |
| stat = RD_REG_DWORD(®->host_status); |
| if ((stat & HSRX_RISC_INT) == 0) |
| break; |
| |
| switch (stat & 0xff) { |
| case 0x1: |
| case 0x2: |
| case 0x10: |
| case 0x11: |
| qla82xx_mbx_completion(vha, MSW(stat)); |
| status |= MBX_INTERRUPT; |
| break; |
| case 0x12: |
| mb[0] = MSW(stat); |
| mb[1] = RD_REG_WORD(®->mailbox_out[1]); |
| mb[2] = RD_REG_WORD(®->mailbox_out[2]); |
| mb[3] = RD_REG_WORD(®->mailbox_out[3]); |
| qla2x00_async_event(vha, rsp, mb); |
| break; |
| case 0x13: |
| qla24xx_process_response_queue(vha, rsp); |
| break; |
| default: |
| DEBUG2(printk("scsi(%ld): " |
| " Unrecognized interrupt type (%d).\n", |
| vha->host_no, stat & 0xff)); |
| break; |
| } |
| } |
| WRT_REG_DWORD(®->host_int, 0); |
| } |
| spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| if (!ha->flags.msi_enabled) |
| qla82xx_wr_32(ha, ha->nx_legacy_intr.tgt_mask_reg, 0xfbff); |
| |
| #ifdef QL_DEBUG_LEVEL_17 |
| if (!irq && ha->flags.eeh_busy) |
| qla_printk(KERN_WARNING, ha, |
| "isr: status %x, cmd_flags %lx, mbox_int %x, stat %x\n", |
| status, ha->mbx_cmd_flags, ha->flags.mbox_int, stat); |
| #endif |
| |
| if (test_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags) && |
| (status & MBX_INTERRUPT) && ha->flags.mbox_int) { |
| set_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags); |
| complete(&ha->mbx_intr_comp); |
| } |
| return IRQ_HANDLED; |
| } |
| |
| irqreturn_t |
| qla82xx_msix_default(int irq, void *dev_id) |
| { |
| scsi_qla_host_t *vha; |
| struct qla_hw_data *ha; |
| struct rsp_que *rsp; |
| struct device_reg_82xx __iomem *reg; |
| int status = 0; |
| unsigned long flags; |
| uint32_t stat; |
| uint16_t mb[4]; |
| |
| rsp = (struct rsp_que *) dev_id; |
| if (!rsp) { |
| printk(KERN_INFO |
| "%s(): NULL response queue pointer\n", __func__); |
| return IRQ_NONE; |
| } |
| ha = rsp->hw; |
| |
| reg = &ha->iobase->isp82; |
| |
| spin_lock_irqsave(&ha->hardware_lock, flags); |
| vha = pci_get_drvdata(ha->pdev); |
| do { |
| if (RD_REG_DWORD(®->host_int)) { |
| stat = RD_REG_DWORD(®->host_status); |
| if ((stat & HSRX_RISC_INT) == 0) |
| break; |
| |
| switch (stat & 0xff) { |
| case 0x1: |
| case 0x2: |
| case 0x10: |
| case 0x11: |
| qla82xx_mbx_completion(vha, MSW(stat)); |
| status |= MBX_INTERRUPT; |
| break; |
| case 0x12: |
| mb[0] = MSW(stat); |
| mb[1] = RD_REG_WORD(®->mailbox_out[1]); |
| mb[2] = RD_REG_WORD(®->mailbox_out[2]); |
| mb[3] = RD_REG_WORD(®->mailbox_out[3]); |
| qla2x00_async_event(vha, rsp, mb); |
| break; |
| case 0x13: |
| qla24xx_process_response_queue(vha, rsp); |
| break; |
| default: |
| DEBUG2(printk("scsi(%ld): " |
| " Unrecognized interrupt type (%d).\n", |
| vha->host_no, stat & 0xff)); |
| break; |
| } |
| } |
| WRT_REG_DWORD(®->host_int, 0); |
| } while (0); |
| |
| spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| |
| #ifdef QL_DEBUG_LEVEL_17 |
| if (!irq && ha->flags.eeh_busy) |
| qla_printk(KERN_WARNING, ha, |
| "isr: status %x, cmd_flags %lx, mbox_int %x, stat %x\n", |
| status, ha->mbx_cmd_flags, ha->flags.mbox_int, stat); |
| #endif |
| |
| if (test_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags) && |
| (status & MBX_INTERRUPT) && ha->flags.mbox_int) { |
| set_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags); |
| complete(&ha->mbx_intr_comp); |
| } |
| return IRQ_HANDLED; |
| } |
| |
| irqreturn_t |
| qla82xx_msix_rsp_q(int irq, void *dev_id) |
| { |
| scsi_qla_host_t *vha; |
| struct qla_hw_data *ha; |
| struct rsp_que *rsp; |
| struct device_reg_82xx __iomem *reg; |
| |
| rsp = (struct rsp_que *) dev_id; |
| if (!rsp) { |
| printk(KERN_INFO |
| "%s(): NULL response queue pointer\n", __func__); |
| return IRQ_NONE; |
| } |
| |
| ha = rsp->hw; |
| reg = &ha->iobase->isp82; |
| spin_lock_irq(&ha->hardware_lock); |
| vha = pci_get_drvdata(ha->pdev); |
| qla24xx_process_response_queue(vha, rsp); |
| WRT_REG_DWORD(®->host_int, 0); |
| spin_unlock_irq(&ha->hardware_lock); |
| return IRQ_HANDLED; |
| } |
| |
| void |
| qla82xx_poll(int irq, void *dev_id) |
| { |
| scsi_qla_host_t *vha; |
| struct qla_hw_data *ha; |
| struct rsp_que *rsp; |
| struct device_reg_82xx __iomem *reg; |
| int status = 0; |
| uint32_t stat; |
| uint16_t mb[4]; |
| unsigned long flags; |
| |
| rsp = (struct rsp_que *) dev_id; |
| if (!rsp) { |
| printk(KERN_INFO |
| "%s(): NULL response queue pointer\n", __func__); |
| return; |
| } |
| ha = rsp->hw; |
| |
| reg = &ha->iobase->isp82; |
| spin_lock_irqsave(&ha->hardware_lock, flags); |
| vha = pci_get_drvdata(ha->pdev); |
| |
| if (RD_REG_DWORD(®->host_int)) { |
| stat = RD_REG_DWORD(®->host_status); |
| switch (stat & 0xff) { |
| case 0x1: |
| case 0x2: |
| case 0x10: |
| case 0x11: |
| qla82xx_mbx_completion(vha, MSW(stat)); |
| status |= MBX_INTERRUPT; |
| break; |
| case 0x12: |
| mb[0] = MSW(stat); |
| mb[1] = RD_REG_WORD(®->mailbox_out[1]); |
| mb[2] = RD_REG_WORD(®->mailbox_out[2]); |
| mb[3] = RD_REG_WORD(®->mailbox_out[3]); |
| qla2x00_async_event(vha, rsp, mb); |
| break; |
| case 0x13: |
| qla24xx_process_response_queue(vha, rsp); |
| break; |
| default: |
| DEBUG2(printk("scsi(%ld): Unrecognized interrupt type " |
| "(%d).\n", |
| vha->host_no, stat & 0xff)); |
| break; |
| } |
| } |
| WRT_REG_DWORD(®->host_int, 0); |
| spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| } |
| |
| void |
| qla82xx_enable_intrs(struct qla_hw_data *ha) |
| { |
| scsi_qla_host_t *vha = pci_get_drvdata(ha->pdev); |
| qla82xx_mbx_intr_enable(vha); |
| spin_lock_irq(&ha->hardware_lock); |
| qla82xx_wr_32(ha, ha->nx_legacy_intr.tgt_mask_reg, 0xfbff); |
| spin_unlock_irq(&ha->hardware_lock); |
| ha->interrupts_on = 1; |
| } |
| |
| void |
| qla82xx_disable_intrs(struct qla_hw_data *ha) |
| { |
| scsi_qla_host_t *vha = pci_get_drvdata(ha->pdev); |
| qla82xx_mbx_intr_disable(vha); |
| spin_lock_irq(&ha->hardware_lock); |
| qla82xx_wr_32(ha, ha->nx_legacy_intr.tgt_mask_reg, 0x0400); |
| spin_unlock_irq(&ha->hardware_lock); |
| ha->interrupts_on = 0; |
| } |
| |
| void qla82xx_init_flags(struct qla_hw_data *ha) |
| { |
| struct qla82xx_legacy_intr_set *nx_legacy_intr; |
| |
| /* ISP 8021 initializations */ |
| rwlock_init(&ha->hw_lock); |
| ha->qdr_sn_window = -1; |
| ha->ddr_mn_window = -1; |
| ha->curr_window = 255; |
| ha->portnum = PCI_FUNC(ha->pdev->devfn); |
| nx_legacy_intr = &legacy_intr[ha->portnum]; |
| ha->nx_legacy_intr.int_vec_bit = nx_legacy_intr->int_vec_bit; |
| ha->nx_legacy_intr.tgt_status_reg = nx_legacy_intr->tgt_status_reg; |
| ha->nx_legacy_intr.tgt_mask_reg = nx_legacy_intr->tgt_mask_reg; |
| ha->nx_legacy_intr.pci_int_reg = nx_legacy_intr->pci_int_reg; |
| } |
| |
| static inline void |
| qla82xx_set_drv_active(scsi_qla_host_t *vha) |
| { |
| uint32_t drv_active; |
| struct qla_hw_data *ha = vha->hw; |
| |
| drv_active = qla82xx_rd_32(ha, QLA82XX_CRB_DRV_ACTIVE); |
| |
| /* If reset value is all FF's, initialize DRV_ACTIVE */ |
| if (drv_active == 0xffffffff) { |
| qla82xx_wr_32(ha, QLA82XX_CRB_DRV_ACTIVE, 0); |
| drv_active = qla82xx_rd_32(ha, QLA82XX_CRB_DRV_ACTIVE); |
| } |
| drv_active |= (1 << (ha->portnum * 4)); |
| qla82xx_wr_32(ha, QLA82XX_CRB_DRV_ACTIVE, drv_active); |
| } |
| |
| inline void |
| qla82xx_clear_drv_active(struct qla_hw_data *ha) |
| { |
| uint32_t drv_active; |
| |
| drv_active = qla82xx_rd_32(ha, QLA82XX_CRB_DRV_ACTIVE); |
| drv_active &= ~(1 << (ha->portnum * 4)); |
| qla82xx_wr_32(ha, QLA82XX_CRB_DRV_ACTIVE, drv_active); |
| } |
| |
| static inline int |
| qla82xx_need_reset(struct qla_hw_data *ha) |
| { |
| uint32_t drv_state; |
| int rval; |
| |
| drv_state = qla82xx_rd_32(ha, QLA82XX_CRB_DRV_STATE); |
| rval = drv_state & (1 << (ha->portnum * 4)); |
| return rval; |
| } |
| |
| static inline void |
| qla82xx_set_rst_ready(struct qla_hw_data *ha) |
| { |
| uint32_t drv_state; |
| scsi_qla_host_t *vha = pci_get_drvdata(ha->pdev); |
| |
| drv_state = qla82xx_rd_32(ha, QLA82XX_CRB_DRV_STATE); |
| |
| /* If reset value is all FF's, initialize DRV_STATE */ |
| if (drv_state == 0xffffffff) { |
| qla82xx_wr_32(ha, QLA82XX_CRB_DRV_STATE, 0); |
| drv_state = qla82xx_rd_32(ha, QLA82XX_CRB_DRV_STATE); |
| } |
| drv_state |= (QLA82XX_DRVST_RST_RDY << (ha->portnum * 4)); |
| qla_printk(KERN_INFO, ha, |
| "%s(%ld):drv_state = 0x%x\n", |
| __func__, vha->host_no, drv_state); |
| qla82xx_wr_32(ha, QLA82XX_CRB_DRV_STATE, drv_state); |
| } |
| |
| static inline void |
| qla82xx_clear_rst_ready(struct qla_hw_data *ha) |
| { |
| uint32_t drv_state; |
| |
| drv_state = qla82xx_rd_32(ha, QLA82XX_CRB_DRV_STATE); |
| drv_state &= ~(QLA82XX_DRVST_RST_RDY << (ha->portnum * 4)); |
| qla82xx_wr_32(ha, QLA82XX_CRB_DRV_STATE, drv_state); |
| } |
| |
| static inline void |
| qla82xx_set_qsnt_ready(struct qla_hw_data *ha) |
| { |
| uint32_t qsnt_state; |
| |
| qsnt_state = qla82xx_rd_32(ha, QLA82XX_CRB_DRV_STATE); |
| qsnt_state |= (QLA82XX_DRVST_QSNT_RDY << (ha->portnum * 4)); |
| qla82xx_wr_32(ha, QLA82XX_CRB_DRV_STATE, qsnt_state); |
| } |
| |
| int qla82xx_load_fw(scsi_qla_host_t *vha) |
| { |
| int rst; |
| struct fw_blob *blob; |
| struct qla_hw_data *ha = vha->hw; |
| |
| /* Put both the PEG CMD and RCV PEG to default state |
| * of 0 before resetting the hardware |
| */ |
| qla82xx_wr_32(ha, CRB_CMDPEG_STATE, 0); |
| qla82xx_wr_32(ha, CRB_RCVPEG_STATE, 0); |
| |
| if (qla82xx_pinit_from_rom(vha) != QLA_SUCCESS) { |
| qla_printk(KERN_ERR, ha, |
| "%s: Error during CRB Initialization\n", __func__); |
| return QLA_FUNCTION_FAILED; |
| } |
| udelay(500); |
| |
| /* Bring QM and CAMRAM out of reset */ |
| rst = qla82xx_rd_32(ha, QLA82XX_ROMUSB_GLB_SW_RESET); |
| rst &= ~((1 << 28) | (1 << 24)); |
| qla82xx_wr_32(ha, QLA82XX_ROMUSB_GLB_SW_RESET, rst); |
| |
| /* |
| * FW Load priority: |
| * 1) Operational firmware residing in flash. |
| * 2) Firmware via request-firmware interface (.bin file). |
| */ |
| if (ql2xfwloadbin == 2) |
| goto try_blob_fw; |
| |
| qla_printk(KERN_INFO, ha, |
| "Attempting to load firmware from flash\n"); |
| |
| if (qla82xx_fw_load_from_flash(ha) == QLA_SUCCESS) { |
| qla_printk(KERN_ERR, ha, |
| "Firmware loaded successfully from flash\n"); |
| return QLA_SUCCESS; |
| } |
| try_blob_fw: |
| qla_printk(KERN_INFO, ha, |
| "Attempting to load firmware from blob\n"); |
| |
| /* Load firmware blob. */ |
| blob = ha->hablob = qla2x00_request_firmware(vha); |
| if (!blob) { |
| qla_printk(KERN_ERR, ha, |
| "Firmware image not present.\n"); |
| goto fw_load_failed; |
| } |
| |
| if (qla82xx_fw_load_from_blob(ha) == QLA_SUCCESS) { |
| qla_printk(KERN_ERR, ha, |
| "%s: Firmware loaded successfully " |
| " from binary blob\n", __func__); |
| return QLA_SUCCESS; |
| } else { |
| qla_printk(KERN_ERR, ha, |
| "Firmware load failed from binary blob\n"); |
| blob->fw = NULL; |
| blob = NULL; |
| goto fw_load_failed; |
| } |
| return QLA_SUCCESS; |
| |
| fw_load_failed: |
| return QLA_FUNCTION_FAILED; |
| } |
| |
| static int |
| qla82xx_start_firmware(scsi_qla_host_t *vha) |
| { |
| int pcie_cap; |
| uint16_t lnk; |
| struct qla_hw_data *ha = vha->hw; |
| |
| /* scrub dma mask expansion register */ |
| qla82xx_wr_32(ha, CRB_DMA_SHIFT, 0x55555555); |
| |
| /* Overwrite stale initialization register values */ |
| qla82xx_wr_32(ha, QLA82XX_PEG_HALT_STATUS1, 0); |
| qla82xx_wr_32(ha, QLA82XX_PEG_HALT_STATUS2, 0); |
| |
| if (qla82xx_load_fw(vha) != QLA_SUCCESS) { |
| qla_printk(KERN_INFO, ha, |
| "%s: Error trying to start fw!\n", __func__); |
| return QLA_FUNCTION_FAILED; |
| } |
| |
| /* Handshake with the card before we register the devices. */ |
| if (qla82xx_check_cmdpeg_state(ha) != QLA_SUCCESS) { |
| qla_printk(KERN_INFO, ha, |
| "%s: Error during card handshake!\n", __func__); |
| return QLA_FUNCTION_FAILED; |
| } |
| |
| /* Negotiated Link width */ |
| pcie_cap = pci_find_capability(ha->pdev, PCI_CAP_ID_EXP); |
| pci_read_config_word(ha->pdev, pcie_cap + PCI_EXP_LNKSTA, &lnk); |
| ha->link_width = (lnk >> 4) & 0x3f; |
| |
| /* Synchronize with Receive peg */ |
| return qla82xx_check_rcvpeg_state(ha); |
| } |
| |
| static inline int |
| qla2xx_build_scsi_type_6_iocbs(srb_t *sp, struct cmd_type_6 *cmd_pkt, |
| uint16_t tot_dsds) |
| { |
| uint32_t *cur_dsd = NULL; |
| scsi_qla_host_t *vha; |
| struct qla_hw_data *ha; |
| struct scsi_cmnd *cmd; |
| struct scatterlist *cur_seg; |
| uint32_t *dsd_seg; |
| void *next_dsd; |
| uint8_t avail_dsds; |
| uint8_t first_iocb = 1; |
| uint32_t dsd_list_len; |
| struct dsd_dma *dsd_ptr; |
| struct ct6_dsd *ctx; |
| |
| cmd = sp->cmd; |
| |
| /* Update entry type to indicate Command Type 3 IOCB */ |
| *((uint32_t *)(&cmd_pkt->entry_type)) = |
| __constant_cpu_to_le32(COMMAND_TYPE_6); |
| |
| /* No data transfer */ |
| if (!scsi_bufflen(cmd) || cmd->sc_data_direction == DMA_NONE) { |
| cmd_pkt->byte_count = __constant_cpu_to_le32(0); |
| return 0; |
| } |
| |
| vha = sp->fcport->vha; |
| ha = vha->hw; |
| |
| /* Set transfer direction */ |
| if (cmd->sc_data_direction == DMA_TO_DEVICE) { |
| cmd_pkt->control_flags = |
| __constant_cpu_to_le16(CF_WRITE_DATA); |
| ha->qla_stats.output_bytes += scsi_bufflen(cmd); |
| } else if (cmd->sc_data_direction == DMA_FROM_DEVICE) { |
| cmd_pkt->control_flags = |
| __constant_cpu_to_le16(CF_READ_DATA); |
| ha->qla_stats.input_bytes += scsi_bufflen(cmd); |
| } |
| |
| cur_seg = scsi_sglist(cmd); |
| ctx = sp->ctx; |
| |
| while (tot_dsds) { |
| avail_dsds = (tot_dsds > QLA_DSDS_PER_IOCB) ? |
| QLA_DSDS_PER_IOCB : tot_dsds; |
| tot_dsds -= avail_dsds; |
| dsd_list_len = (avail_dsds + 1) * QLA_DSD_SIZE; |
| |
| dsd_ptr = list_first_entry(&ha->gbl_dsd_list, |
| struct dsd_dma, list); |
| next_dsd = dsd_ptr->dsd_addr; |
| list_del(&dsd_ptr->list); |
| ha->gbl_dsd_avail--; |
| list_add_tail(&dsd_ptr->list, &ctx->dsd_list); |
| ctx->dsd_use_cnt++; |
| ha->gbl_dsd_inuse++; |
| |
| if (first_iocb) { |
| first_iocb = 0; |
| dsd_seg = (uint32_t *)&cmd_pkt->fcp_data_dseg_address; |
| *dsd_seg++ = cpu_to_le32(LSD(dsd_ptr->dsd_list_dma)); |
| *dsd_seg++ = cpu_to_le32(MSD(dsd_ptr->dsd_list_dma)); |
| *dsd_seg++ = dsd_list_len; |
| } else { |
| *cur_dsd++ = cpu_to_le32(LSD(dsd_ptr->dsd_list_dma)); |
| *cur_dsd++ = cpu_to_le32(MSD(dsd_ptr->dsd_list_dma)); |
| *cur_dsd++ = dsd_list_len; |
| } |
| cur_dsd = (uint32_t *)next_dsd; |
| while (avail_dsds) { |
| dma_addr_t sle_dma; |
| |
| sle_dma = sg_dma_address(cur_seg); |
| *cur_dsd++ = cpu_to_le32(LSD(sle_dma)); |
| *cur_dsd++ = cpu_to_le32(MSD(sle_dma)); |
| *cur_dsd++ = cpu_to_le32(sg_dma_len(cur_seg)); |
| cur_seg++; |
| avail_dsds--; |
| } |
| } |
| |
| /* Null termination */ |
| *cur_dsd++ = 0; |
| *cur_dsd++ = 0; |
| *cur_dsd++ = 0; |
| cmd_pkt->control_flags |= CF_DATA_SEG_DESCR_ENABLE; |
| return 0; |
| } |
| |
| /* |
| * qla82xx_calc_dsd_lists() - Determine number of DSD list required |
| * for Command Type 6. |
| * |
| * @dsds: number of data segment decriptors needed |
| * |
| * Returns the number of dsd list needed to store @dsds. |
| */ |
| inline uint16_t |
| qla82xx_calc_dsd_lists(uint16_t dsds) |
| { |
| uint16_t dsd_lists = 0; |
| |
| dsd_lists = (dsds/QLA_DSDS_PER_IOCB); |
| if (dsds % QLA_DSDS_PER_IOCB) |
| dsd_lists++; |
| return dsd_lists; |
| } |
| |
| /* |
| * qla82xx_start_scsi() - Send a SCSI command to the ISP |
| * @sp: command to send to the ISP |
| * |
| * Returns non-zero if a failure occured, else zero. |
| */ |
| int |
| qla82xx_start_scsi(srb_t *sp) |
| { |
| int ret, nseg; |
| unsigned long flags; |
| struct scsi_cmnd *cmd; |
| uint32_t *clr_ptr; |
| uint32_t index; |
| uint32_t handle; |
| uint16_t cnt; |
| uint16_t req_cnt; |
| uint16_t tot_dsds; |
| struct device_reg_82xx __iomem *reg; |
| uint32_t dbval; |
| uint32_t *fcp_dl; |
| uint8_t additional_cdb_len; |
| struct ct6_dsd *ctx; |
| struct scsi_qla_host *vha = sp->fcport->vha; |
| struct qla_hw_data *ha = vha->hw; |
| struct req_que *req = NULL; |
| struct rsp_que *rsp = NULL; |
| |
| /* Setup device pointers. */ |
| ret = 0; |
| reg = &ha->iobase->isp82; |
| cmd = sp->cmd; |
| req = vha->req; |
| rsp = ha->rsp_q_map[0]; |
| |
| /* So we know we haven't pci_map'ed anything yet */ |
| tot_dsds = 0; |
| |
| dbval = 0x04 | (ha->portnum << 5); |
| |
| /* Send marker if required */ |
| if (vha->marker_needed != 0) { |
| if (qla2x00_marker(vha, req, |
| rsp, 0, 0, MK_SYNC_ALL) != QLA_SUCCESS) |
| return QLA_FUNCTION_FAILED; |
| vha->marker_needed = 0; |
| } |
| |
| /* Acquire ring specific lock */ |
| spin_lock_irqsave(&ha->hardware_lock, flags); |
| |
| /* Check for room in outstanding command list. */ |
| handle = req->current_outstanding_cmd; |
| for (index = 1; index < MAX_OUTSTANDING_COMMANDS; index++) { |
| handle++; |
| if (handle == MAX_OUTSTANDING_COMMANDS) |
| handle = 1; |
| if (!req->outstanding_cmds[handle]) |
| break; |
| } |
| if (index == MAX_OUTSTANDING_COMMANDS) |
| goto queuing_error; |
| |
| /* Map the sg table so we have an accurate count of sg entries needed */ |
| if (scsi_sg_count(cmd)) { |
| nseg = dma_map_sg(&ha->pdev->dev, scsi_sglist(cmd), |
| scsi_sg_count(cmd), cmd->sc_data_direction); |
| if (unlikely(!nseg)) |
| goto queuing_error; |
| } else |
| nseg = 0; |
| |
| tot_dsds = nseg; |
| |
| if (tot_dsds > ql2xshiftctondsd) { |
| struct cmd_type_6 *cmd_pkt; |
| uint16_t more_dsd_lists = 0; |
| struct dsd_dma *dsd_ptr; |
| uint16_t i; |
| |
| more_dsd_lists = qla82xx_calc_dsd_lists(tot_dsds); |
| if ((more_dsd_lists + ha->gbl_dsd_inuse) >= NUM_DSD_CHAIN) |
| goto queuing_error; |
| |
| if (more_dsd_lists <= ha->gbl_dsd_avail) |
| goto sufficient_dsds; |
| else |
| more_dsd_lists -= ha->gbl_dsd_avail; |
| |
| for (i = 0; i < more_dsd_lists; i++) { |
| dsd_ptr = kzalloc(sizeof(struct dsd_dma), GFP_ATOMIC); |
| if (!dsd_ptr) |
| goto queuing_error; |
| |
| dsd_ptr->dsd_addr = dma_pool_alloc(ha->dl_dma_pool, |
| GFP_ATOMIC, &dsd_ptr->dsd_list_dma); |
| if (!dsd_ptr->dsd_addr) { |
| kfree(dsd_ptr); |
| goto queuing_error; |
| } |
| list_add_tail(&dsd_ptr->list, &ha->gbl_dsd_list); |
| ha->gbl_dsd_avail++; |
| } |
| |
| sufficient_dsds: |
| req_cnt = 1; |
| |
| ctx = sp->ctx = mempool_alloc(ha->ctx_mempool, GFP_ATOMIC); |
| if (!sp->ctx) { |
| DEBUG(printk(KERN_INFO |
| "%s(%ld): failed to allocate" |
| " ctx.\n", __func__, vha->host_no)); |
| goto queuing_error; |
| } |
| memset(ctx, 0, sizeof(struct ct6_dsd)); |
| ctx->fcp_cmnd = dma_pool_alloc(ha->fcp_cmnd_dma_pool, |
| GFP_ATOMIC, &ctx->fcp_cmnd_dma); |
| if (!ctx->fcp_cmnd) { |
| DEBUG2_3(printk("%s(%ld): failed to allocate" |
| " fcp_cmnd.\n", __func__, vha->host_no)); |
| goto queuing_error_fcp_cmnd; |
| } |
| |
| /* Initialize the DSD list and dma handle */ |
| INIT_LIST_HEAD(&ctx->dsd_list); |
| ctx->dsd_use_cnt = 0; |
| |
| if (cmd->cmd_len > 16) { |
| additional_cdb_len = cmd->cmd_len - 16; |
| if ((cmd->cmd_len % 4) != 0) { |
| /* SCSI command bigger than 16 bytes must be |
| * multiple of 4 |
| */ |
| goto queuing_error_fcp_cmnd; |
| } |
| ctx->fcp_cmnd_len = 12 + cmd->cmd_len + 4; |
| } else { |
| additional_cdb_len = 0; |
| ctx->fcp_cmnd_len = 12 + 16 + 4; |
| } |
| |
| cmd_pkt = (struct cmd_type_6 *)req->ring_ptr; |
| cmd_pkt->handle = MAKE_HANDLE(req->id, handle); |
| |
| /* Zero out remaining portion of packet. */ |
| /* tagged queuing modifier -- default is TSK_SIMPLE (0). */ |
| clr_ptr = (uint32_t *)cmd_pkt + 2; |
| memset(clr_ptr, 0, REQUEST_ENTRY_SIZE - 8); |
| cmd_pkt->dseg_count = cpu_to_le16(tot_dsds); |
| |
| /* Set NPORT-ID and LUN number*/ |
| cmd_pkt->nport_handle = cpu_to_le16(sp->fcport->loop_id); |
| cmd_pkt->port_id[0] = sp->fcport->d_id.b.al_pa; |
| cmd_pkt->port_id[1] = sp->fcport->d_id.b.area; |
| cmd_pkt->port_id[2] = sp->fcport->d_id.b.domain; |
| cmd_pkt->vp_index = sp->fcport->vp_idx; |
| |
| /* Build IOCB segments */ |
| if (qla2xx_build_scsi_type_6_iocbs(sp, cmd_pkt, tot_dsds)) |
| goto queuing_error_fcp_cmnd; |
| |
| int_to_scsilun(sp->cmd->device->lun, &cmd_pkt->lun); |
| host_to_fcp_swap((uint8_t *)&cmd_pkt->lun, sizeof(cmd_pkt->lun)); |
| |
| /* build FCP_CMND IU */ |
| memset(ctx->fcp_cmnd, 0, sizeof(struct fcp_cmnd)); |
| int_to_scsilun(sp->cmd->device->lun, &ctx->fcp_cmnd->lun); |
| ctx->fcp_cmnd->additional_cdb_len = additional_cdb_len; |
| |
| if (cmd->sc_data_direction == DMA_TO_DEVICE) |
| ctx->fcp_cmnd->additional_cdb_len |= 1; |
| else if (cmd->sc_data_direction == DMA_FROM_DEVICE) |
| ctx->fcp_cmnd->additional_cdb_len |= 2; |
| |
| memcpy(ctx->fcp_cmnd->cdb, cmd->cmnd, cmd->cmd_len); |
| |
| fcp_dl = (uint32_t *)(ctx->fcp_cmnd->cdb + 16 + |
| additional_cdb_len); |
| *fcp_dl = htonl((uint32_t)scsi_bufflen(cmd)); |
| |
| cmd_pkt->fcp_cmnd_dseg_len = cpu_to_le16(ctx->fcp_cmnd_len); |
| cmd_pkt->fcp_cmnd_dseg_address[0] = |
| cpu_to_le32(LSD(ctx->fcp_cmnd_dma)); |
| cmd_pkt->fcp_cmnd_dseg_address[1] = |
| cpu_to_le32(MSD(ctx->fcp_cmnd_dma)); |
| |
| sp->flags |= SRB_FCP_CMND_DMA_VALID; |
| cmd_pkt->byte_count = cpu_to_le32((uint32_t)scsi_bufflen(cmd)); |
| /* Set total data segment count. */ |
| cmd_pkt->entry_count = (uint8_t)req_cnt; |
| /* Specify response queue number where |
| * completion should happen |
| */ |
| cmd_pkt->entry_status = (uint8_t) rsp->id; |
| } else { |
| struct cmd_type_7 *cmd_pkt; |
| req_cnt = qla24xx_calc_iocbs(tot_dsds); |
| if (req->cnt < (req_cnt + 2)) { |
| cnt = (uint16_t)RD_REG_DWORD_RELAXED( |
| ®->req_q_out[0]); |
| if (req->ring_index < cnt) |
| req->cnt = cnt - req->ring_index; |
| else |
| req->cnt = req->length - |
| (req->ring_index - cnt); |
| } |
| if (req->cnt < (req_cnt + 2)) |
| goto queuing_error; |
| |
| cmd_pkt = (struct cmd_type_7 *)req->ring_ptr; |
| cmd_pkt->handle = MAKE_HANDLE(req->id, handle); |
| |
| /* Zero out remaining portion of packet. */ |
| /* tagged queuing modifier -- default is TSK_SIMPLE (0).*/ |
| clr_ptr = (uint32_t *)cmd_pkt + 2; |
| memset(clr_ptr, 0, REQUEST_ENTRY_SIZE - 8); |
| cmd_pkt->dseg_count = cpu_to_le16(tot_dsds); |
| |
| /* Set NPORT-ID and LUN number*/ |
| cmd_pkt->nport_handle = cpu_to_le16(sp->fcport->loop_id); |
| cmd_pkt->port_id[0] = sp->fcport->d_id.b.al_pa; |
| cmd_pkt->port_id[1] = sp->fcport->d_id.b.area; |
| cmd_pkt->port_id[2] = sp->fcport->d_id.b.domain; |
| cmd_pkt->vp_index = sp->fcport->vp_idx; |
| |
| int_to_scsilun(sp->cmd->device->lun, &cmd_pkt->lun); |
| host_to_fcp_swap((uint8_t *)&cmd_pkt->lun, |
| sizeof(cmd_pkt->lun)); |
| |
| /* Load SCSI command packet. */ |
| memcpy(cmd_pkt->fcp_cdb, cmd->cmnd, cmd->cmd_len); |
| host_to_fcp_swap(cmd_pkt->fcp_cdb, sizeof(cmd_pkt->fcp_cdb)); |
| |
| cmd_pkt->byte_count = cpu_to_le32((uint32_t)scsi_bufflen(cmd)); |
| |
| /* Build IOCB segments */ |
| qla24xx_build_scsi_iocbs(sp, cmd_pkt, tot_dsds); |
| |
| /* Set total data segment count. */ |
| cmd_pkt->entry_count = (uint8_t)req_cnt; |
| /* Specify response queue number where |
| * completion should happen. |
| */ |
| cmd_pkt->entry_status = (uint8_t) rsp->id; |
| |
| } |
| /* Build command packet. */ |
| req->current_outstanding_cmd = handle; |
| req->outstanding_cmds[handle] = sp; |
| sp->handle = handle; |
| sp->cmd->host_scribble = (unsigned char *)(unsigned long)handle; |
| req->cnt -= req_cnt; |
| wmb(); |
| |
| /* Adjust ring index. */ |
| req->ring_index++; |
| if (req->ring_index == req->length) { |
| req->ring_index = 0; |
| req->ring_ptr = req->ring; |
| } else |
| req->ring_ptr++; |
| |
| sp->flags |= SRB_DMA_VALID; |
| |
| /* Set chip new ring index. */ |
| /* write, read and verify logic */ |
| dbval = dbval | (req->id << 8) | (req->ring_index << 16); |
| if (ql2xdbwr) |
| qla82xx_wr_32(ha, ha->nxdb_wr_ptr, dbval); |
| else { |
| WRT_REG_DWORD( |
| (unsigned long __iomem *)ha->nxdb_wr_ptr, |
| dbval); |
| wmb(); |
| while (RD_REG_DWORD(ha->nxdb_rd_ptr) != dbval) { |
| WRT_REG_DWORD( |
| (unsigned long __iomem *)ha->nxdb_wr_ptr, |
| dbval); |
| wmb(); |
| } |
| } |
| |
| /* Manage unprocessed RIO/ZIO commands in response queue. */ |
| if (vha->flags.process_response_queue && |
| rsp->ring_ptr->signature != RESPONSE_PROCESSED) |
| qla24xx_process_response_queue(vha, rsp); |
| |
| spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| return QLA_SUCCESS; |
| |
| queuing_error_fcp_cmnd: |
| dma_pool_free(ha->fcp_cmnd_dma_pool, ctx->fcp_cmnd, ctx->fcp_cmnd_dma); |
| queuing_error: |
| if (tot_dsds) |
| scsi_dma_unmap(cmd); |
| |
| if (sp->ctx) { |
| mempool_free(sp->ctx, ha->ctx_mempool); |
| sp->ctx = NULL; |
| } |
| spin_unlock_irqrestore(&ha->hardware_lock, flags); |
| |
| return QLA_FUNCTION_FAILED; |
| } |
| |
| uint32_t * |
| qla82xx_read_flash_data(scsi_qla_host_t *vha, uint32_t *dwptr, uint32_t faddr, |
| uint32_t length) |
| { |
| uint32_t i; |
| uint32_t val; |
| struct qla_hw_data *ha = vha->hw; |
| |
| /* Dword reads to flash. */ |
| for (i = 0; i < length/4; i++, faddr += 4) { |
| if (qla82xx_rom_fast_read(ha, faddr, &val)) { |
| qla_printk(KERN_WARNING, ha, |
| "Do ROM fast read failed\n"); |
| goto done_read; |
| } |
| dwptr[i] = __constant_cpu_to_le32(val); |
| } |
| done_read: |
| return dwptr; |
| } |
| |
| int |
| qla82xx_unprotect_flash(struct qla_hw_data *ha) |
| { |
| int ret; |
| uint32_t val; |
| |
| ret = ql82xx_rom_lock_d(ha); |
| if (ret < 0) { |
| qla_printk(KERN_WARNING, ha, "ROM Lock failed\n"); |
| return ret; |
| } |
| |
| ret = qla82xx_read_status_reg(ha, &val); |
| if (ret < 0) |
| goto done_unprotect; |
| |
| val &= ~(0x7 << 2); |
| ret = qla82xx_write_status_reg(ha, val); |
| if (ret < 0) { |
| val |= (0x7 << 2); |
| qla82xx_write_status_reg(ha, val); |
| } |
| |
| if (qla82xx_write_disable_flash(ha) != 0) |
| qla_printk(KERN_WARNING, ha, "Write disable failed\n"); |
| |
| done_unprotect: |
| qla82xx_rd_32(ha, QLA82XX_PCIE_REG(PCIE_SEM2_UNLOCK)); |
| return ret; |
| } |
| |
| int |
| qla82xx_protect_flash(struct qla_hw_data *ha) |
| { |
| int ret; |
| uint32_t val; |
| |
| ret = ql82xx_rom_lock_d(ha); |
| if (ret < 0) { |
| qla_printk(KERN_WARNING, ha, "ROM Lock failed\n"); |
| return ret; |
| } |
| |
| ret = qla82xx_read_status_reg(ha, &val); |
| if (ret < 0) |
| goto done_protect; |
| |
| val |= (0x7 << 2); |
| /* LOCK all sectors */ |
| ret = qla82xx_write_status_reg(ha, val); |
| if (ret < 0) |
| qla_printk(KERN_WARNING, ha, "Write status register failed\n"); |
| |
| if (qla82xx_write_disable_flash(ha) != 0) |
| qla_printk(KERN_WARNING, ha, "Write disable failed\n"); |
| done_protect: |
| qla82xx_rd_32(ha, QLA82XX_PCIE_REG(PCIE_SEM2_UNLOCK)); |
| return ret; |
| } |
| |
| int |
| qla82xx_erase_sector(struct qla_hw_data *ha, int addr) |
| { |
| int ret = 0; |
| |
| ret = ql82xx_rom_lock_d(ha); |
| if (ret < 0) { |
| qla_printk(KERN_WARNING, ha, "ROM Lock failed\n"); |
| return ret; |
| } |
| |
| qla82xx_flash_set_write_enable(ha); |
| qla82xx_wr_32(ha, QLA82XX_ROMUSB_ROM_ADDRESS, addr); |
| qla82xx_wr_32(ha, QLA82XX_ROMUSB_ROM_ABYTE_CNT, 3); |
| qla82xx_wr_32(ha, QLA82XX_ROMUSB_ROM_INSTR_OPCODE, M25P_INSTR_SE); |
| |
| if (qla82xx_wait_rom_done(ha)) { |
| qla_printk(KERN_WARNING, ha, |
| "Error waiting for rom done\n"); |
| ret = -1; |
| goto done; |
| } |
| ret = qla82xx_flash_wait_write_finish(ha); |
| done: |
| qla82xx_rd_32(ha, QLA82XX_PCIE_REG(PCIE_SEM2_UNLOCK)); |
| return ret; |
| } |
| |
| /* |
| * Address and length are byte address |
| */ |
| uint8_t * |
| qla82xx_read_optrom_data(struct scsi_qla_host *vha, uint8_t *buf, |
| uint32_t offset, uint32_t length) |
| { |
| scsi_block_requests(vha->host); |
| qla82xx_read_flash_data(vha, (uint32_t *)buf, offset, length); |
| scsi_unblock_requests(vha->host); |
| return buf; |
| } |
| |
| static int |
| qla82xx_write_flash_data(struct scsi_qla_host *vha, uint32_t *dwptr, |
| uint32_t faddr, uint32_t dwords) |
| { |
| int ret; |
| uint32_t liter; |
| uint32_t sec_mask, rest_addr; |
| dma_addr_t optrom_dma; |
| void *optrom = NULL; |
| int page_mode = 0; |
| struct qla_hw_data *ha = vha->hw; |
| |
| ret = -1; |
| |
| /* Prepare burst-capable write on supported ISPs. */ |
| if (page_mode && !(faddr & 0xfff) && |
| dwords > OPTROM_BURST_DWORDS) { |
| optrom = dma_alloc_coherent(&ha->pdev->dev, OPTROM_BURST_SIZE, |
| &optrom_dma, GFP_KERNEL); |
| if (!optrom) { |
| qla_printk(KERN_DEBUG, ha, |
| "Unable to allocate memory for optrom " |
| "burst write (%x KB).\n", |
| OPTROM_BURST_SIZE / 1024); |
| } |
| } |
| |
| rest_addr = ha->fdt_block_size - 1; |
| sec_mask = ~rest_addr; |
| |
| ret = qla82xx_unprotect_flash(ha); |
| if (ret) { |
| qla_printk(KERN_WARNING, ha, |
| "Unable to unprotect flash for update.\n"); |
| goto write_done; |
| } |
| |
| for (liter = 0; liter < dwords; liter++, faddr += 4, dwptr++) { |
| /* Are we at the beginning of a sector? */ |
| if ((faddr & rest_addr) == 0) { |
| |
| ret = qla82xx_erase_sector(ha, faddr); |
| if (ret) { |
| DEBUG9(qla_printk(KERN_ERR, ha, |
| "Unable to erase sector: " |
| "address=%x.\n", faddr)); |
| break; |
| } |
| } |
| |
| /* Go with burst-write. */ |
| if (optrom && (liter + OPTROM_BURST_DWORDS) <= dwords) { |
| /* Copy data to DMA'ble buffer. */ |
| memcpy(optrom, dwptr, OPTROM_BURST_SIZE); |
| |
| ret = qla2x00_load_ram(vha, optrom_dma, |
| (ha->flash_data_off | faddr), |
| OPTROM_BURST_DWORDS); |
| if (ret != QLA_SUCCESS) { |
| qla_printk(KERN_WARNING, ha, |
| "Unable to burst-write optrom segment " |
| "(%x/%x/%llx).\n", ret, |
| (ha->flash_data_off | faddr), |
| (unsigned long long)optrom_dma); |
| qla_printk(KERN_WARNING, ha, |
| "Reverting to slow-write.\n"); |
| |
| dma_free_coherent(&ha->pdev->dev, |
| OPTROM_BURST_SIZE, optrom, optrom_dma); |
| optrom = NULL; |
| } else { |
| liter += OPTROM_BURST_DWORDS - 1; |
| faddr += OPTROM_BURST_DWORDS - 1; |
| dwptr += OPTROM_BURST_DWORDS - 1; |
| continue; |
| } |
| } |
| |
| ret = qla82xx_write_flash_dword(ha, faddr, |
| cpu_to_le32(*dwptr)); |
| if (ret) { |
| DEBUG9(printk(KERN_DEBUG "%s(%ld) Unable to program" |
| "flash address=%x data=%x.\n", __func__, |
| ha->host_no, faddr, *dwptr)); |
| break; |
| } |
| } |
| |
| ret = qla82xx_protect_flash(ha); |
| if (ret) |
| qla_printk(KERN_WARNING, ha, |
| "Unable to protect flash after update.\n"); |
| write_done: |
| if (optrom) |
| dma_free_coherent(&ha->pdev->dev, |
| OPTROM_BURST_SIZE, optrom, optrom_dma); |
| return ret; |
| } |
| |
| int |
| qla82xx_write_optrom_data(struct scsi_qla_host *vha, uint8_t *buf, |
| uint32_t offset, uint32_t length) |
| { |
| int rval; |
| |
| /* Suspend HBA. */ |
| scsi_block_requests(vha->host); |
| rval = qla82xx_write_flash_data(vha, (uint32_t *)buf, offset, |
| length >> 2); |
| scsi_unblock_requests(vha->host); |
| |
| /* Convert return ISP82xx to generic */ |
| if (rval) |
| rval = QLA_FUNCTION_FAILED; |
| else |
| rval = QLA_SUCCESS; |
| return rval; |
| } |
| |
| void |
| qla82xx_start_iocbs(srb_t *sp) |
| { |
| struct qla_hw_data *ha = sp->fcport->vha->hw; |
| struct req_que *req = ha->req_q_map[0]; |
| struct device_reg_82xx __iomem *reg; |
| uint32_t dbval; |
| |
| /* Adjust ring index. */ |
| req->ring_index++; |
| if (req->ring_index == req->length) { |
| req->ring_index = 0; |
| req->ring_ptr = req->ring; |
| } else |
| req->ring_ptr++; |
| |
| reg = &ha->iobase->isp82; |
| dbval = 0x04 | (ha->portnum << 5); |
| |
| dbval = dbval | (req->id << 8) | (req->ring_index << 16); |
| WRT_REG_DWORD((unsigned long __iomem *)ha->nxdb_wr_ptr, dbval); |
| wmb(); |
| while (RD_REG_DWORD(ha->nxdb_rd_ptr) != dbval) { |
| WRT_REG_DWORD((unsigned long __iomem *)ha->nxdb_wr_ptr, dbval); |
| wmb(); |
| } |
| } |
| |
| /* |
| * qla82xx_device_bootstrap |
| * Initialize device, set DEV_READY, start fw |
| * |
| * Note: |
| * IDC lock must be held upon entry |
| * |
| * Return: |
| * Success : 0 |
| * Failed : 1 |
| */ |
| static int |
| qla82xx_device_bootstrap(scsi_qla_host_t *vha) |
| { |
| int rval, i, timeout; |
| uint32_t old_count, count; |
| struct qla_hw_data *ha = vha->hw; |
| |
| if (qla82xx_need_reset(ha)) |
| goto dev_initialize; |
| |
| old_count = qla82xx_rd_32(ha, QLA82XX_PEG_ALIVE_COUNTER); |
| |
| for (i = 0; i < 10; i++) { |
| timeout = msleep_interruptible(200); |
| if (timeout) { |
| qla82xx_wr_32(ha, QLA82XX_CRB_DEV_STATE, |
| QLA82XX_DEV_FAILED); |
| return QLA_FUNCTION_FAILED; |
| } |
| |
| count = qla82xx_rd_32(ha, QLA82XX_PEG_ALIVE_COUNTER); |
| if (count != old_count) |
| goto dev_ready; |
| } |
| |
| dev_initialize: |
| /* set to DEV_INITIALIZING */ |
| qla_printk(KERN_INFO, ha, "HW State: INITIALIZING\n"); |
| qla82xx_wr_32(ha, QLA82XX_CRB_DEV_STATE, QLA82XX_DEV_INITIALIZING); |
| |
| /* Driver that sets device state to initializating sets IDC version */ |
| qla82xx_wr_32(ha, QLA82XX_CRB_DRV_IDC_VERSION, QLA82XX_IDC_VERSION); |
| |
| qla82xx_idc_unlock(ha); |
| rval = qla82xx_start_firmware(vha); |
| qla82xx_idc_lock(ha); |
| |
| if (rval != QLA_SUCCESS) { |
| qla_printk(KERN_INFO, ha, "HW State: FAILED\n"); |
| qla82xx_clear_drv_active(ha); |
| qla82xx_wr_32(ha, QLA82XX_CRB_DEV_STATE, QLA82XX_DEV_FAILED); |
| return rval; |
| } |
| |
| dev_ready: |
| qla_printk(KERN_INFO, ha, "HW State: READY\n"); |
| qla82xx_wr_32(ha, QLA82XX_CRB_DEV_STATE, QLA82XX_DEV_READY); |
| |
| return QLA_SUCCESS; |
| } |
| |
| static void |
| qla82xx_dev_failed_handler(scsi_qla_host_t *vha) |
| { |
| struct qla_hw_data *ha = vha->hw; |
| |
| /* Disable the board */ |
| qla_printk(KERN_INFO, ha, "Disabling the board\n"); |
| |
| /* Set DEV_FAILED flag to disable timer */ |
| vha->device_flags |= DFLG_DEV_FAILED; |
| qla2x00_abort_all_cmds(vha, DID_NO_CONNECT << 16); |
| qla2x00_mark_all_devices_lost(vha, 0); |
| vha->flags.online = 0; |
| vha->flags.init_done = 0; |
| } |
| |
| /* |
| * qla82xx_need_reset_handler |
| * Code to start reset sequence |
| * |
| * Note: |
| * IDC lock must be held upon entry |
| * |
| * Return: |
| * Success : 0 |
| * Failed : 1 |
| */ |
| static void |
| qla82xx_need_reset_handler(scsi_qla_host_t *vha) |
| { |
| uint32_t dev_state, drv_state, drv_active; |
| unsigned long reset_timeout; |
| struct qla_hw_data *ha = vha->hw; |
| struct req_que *req = ha->req_q_map[0]; |
| |
| if (vha->flags.online) { |
| qla82xx_idc_unlock(ha); |
| qla2x00_abort_isp_cleanup(vha); |
| ha->isp_ops->get_flash_version(vha, req->ring); |
| ha->isp_ops->nvram_config(vha); |
| qla82xx_idc_lock(ha); |
| } |
| |
| qla82xx_set_rst_ready(ha); |
| |
| /* wait for 10 seconds for reset ack from all functions */ |
| reset_timeout = jiffies + (ha->nx_reset_timeout * HZ); |
| |
| drv_state = qla82xx_rd_32(ha, QLA82XX_CRB_DRV_STATE); |
| drv_active = qla82xx_rd_32(ha, QLA82XX_CRB_DRV_ACTIVE); |
| |
| while (drv_state != drv_active) { |
| if (time_after_eq(jiffies, reset_timeout)) { |
| qla_printk(KERN_INFO, ha, |
| "%s: RESET TIMEOUT!\n", QLA2XXX_DRIVER_NAME); |
| break; |
| } |
| qla82xx_idc_unlock(ha); |
| msleep(1000); |
| qla82xx_idc_lock(ha); |
| drv_state = qla82xx_rd_32(ha, QLA82XX_CRB_DRV_STATE); |
| drv_active = qla82xx_rd_32(ha, QLA82XX_CRB_DRV_ACTIVE); |
| } |
| |
| dev_state = qla82xx_rd_32(ha, QLA82XX_CRB_DEV_STATE); |
| qla_printk(KERN_INFO, ha, "3:Device state is 0x%x = %s\n", dev_state, |
| dev_state < MAX_STATES ? qdev_state[dev_state] : "Unknown"); |
| |
| /* Force to DEV_COLD unless someone else is starting a reset */ |
| if (dev_state != QLA82XX_DEV_INITIALIZING) { |
| qla_printk(KERN_INFO, ha, "HW State: COLD/RE-INIT\n"); |
| qla82xx_wr_32(ha, QLA82XX_CRB_DEV_STATE, QLA82XX_DEV_COLD); |
| } |
| } |
| |
| static void |
| qla82xx_check_fw_alive(scsi_qla_host_t *vha) |
| { |
| uint32_t fw_heartbeat_counter, halt_status; |
| struct qla_hw_data *ha = vha->hw; |
| |
| fw_heartbeat_counter = qla82xx_rd_32(ha, QLA82XX_PEG_ALIVE_COUNTER); |
| if (vha->fw_heartbeat_counter == fw_heartbeat_counter) { |
| vha->seconds_since_last_heartbeat++; |
| /* FW not alive after 2 seconds */ |
| if (vha->seconds_since_last_heartbeat == 2) { |
| vha->seconds_since_last_heartbeat = 0; |
| halt_status = qla82xx_rd_32(ha, |
| QLA82XX_PEG_HALT_STATUS1); |
| if (halt_status & HALT_STATUS_UNRECOVERABLE) { |
| set_bit(ISP_UNRECOVERABLE, &vha->dpc_flags); |
| } else { |
| qla_printk(KERN_INFO, ha, |
| "scsi(%ld): %s - detect abort needed\n", |
| vha->host_no, __func__); |
| set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags); |
| } |
| qla2xxx_wake_dpc(vha); |
| } |
| } |
| vha->fw_heartbeat_counter = fw_heartbeat_counter; |
| } |
| |
| /* |
| * qla82xx_device_state_handler |
| * Main state handler |
| * |
| * Note: |
| * IDC lock must be held upon entry |
| * |
| * Return: |
| * Success : 0 |
| * Failed : 1 |
| */ |
| int |
| qla82xx_device_state_handler(scsi_qla_host_t *vha) |
| { |
| uint32_t dev_state; |
| int rval = QLA_SUCCESS; |
| unsigned long dev_init_timeout; |
| struct qla_hw_data *ha = vha->hw; |
| |
| qla82xx_idc_lock(ha); |
| if (!vha->flags.init_done) |
| qla82xx_set_drv_active(vha); |
| |
| dev_state = qla82xx_rd_32(ha, QLA82XX_CRB_DEV_STATE); |
| qla_printk(KERN_INFO, ha, "1:Device state is 0x%x = %s\n", dev_state, |
| dev_state < MAX_STATES ? qdev_state[dev_state] : "Unknown"); |
| |
| /* wait for 30 seconds for device to go ready */ |
| dev_init_timeout = jiffies + (ha->nx_dev_init_timeout * HZ); |
| |
| while (1) { |
| |
| if (time_after_eq(jiffies, dev_init_timeout)) { |
| DEBUG(qla_printk(KERN_INFO, ha, |
| "%s: device init failed!\n", |
| QLA2XXX_DRIVER_NAME)); |
| rval = QLA_FUNCTION_FAILED; |
| break; |
| } |
| dev_state = qla82xx_rd_32(ha, QLA82XX_CRB_DEV_STATE); |
| qla_printk(KERN_INFO, ha, |
| "2:Device state is 0x%x = %s\n", dev_state, |
| dev_state < MAX_STATES ? |
| qdev_state[dev_state] : "Unknown"); |
| |
| switch (dev_state) { |
| case QLA82XX_DEV_READY: |
| goto exit; |
| case QLA82XX_DEV_COLD: |
| rval = qla82xx_device_bootstrap(vha); |
| goto exit; |
| case QLA82XX_DEV_INITIALIZING: |
| qla82xx_idc_unlock(ha); |
| msleep(1000); |
| qla82xx_idc_lock(ha); |
| break; |
| case QLA82XX_DEV_NEED_RESET: |
| if (!ql2xdontresethba) |
| qla82xx_need_reset_handler(vha); |
| break; |
| case QLA82XX_DEV_NEED_QUIESCENT: |
| qla82xx_set_qsnt_ready(ha); |
| case QLA82XX_DEV_QUIESCENT: |
| qla82xx_idc_unlock(ha); |
| msleep(1000); |
| qla82xx_idc_lock(ha); |
| break; |
| case QLA82XX_DEV_FAILED: |
| qla82xx_dev_failed_handler(vha); |
| rval = QLA_FUNCTION_FAILED; |
| goto exit; |
| default: |
| qla82xx_idc_unlock(ha); |
| msleep(1000); |
| qla82xx_idc_lock(ha); |
| } |
| } |
| exit: |
| qla82xx_idc_unlock(ha); |
| return rval; |
| } |
| |
| void qla82xx_watchdog(scsi_qla_host_t *vha) |
| { |
| uint32_t dev_state; |
| struct qla_hw_data *ha = vha->hw; |
| |
| dev_state = qla82xx_rd_32(ha, QLA82XX_CRB_DEV_STATE); |
| |
| /* don't poll if reset is going on */ |
| if (!(test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) || |
| test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) || |
| test_bit(ISP_ABORT_RETRY, &vha->dpc_flags))) { |
| if (dev_state == QLA82XX_DEV_NEED_RESET) { |
| qla_printk(KERN_WARNING, ha, |
| "%s(): Adapter reset needed!\n", __func__); |
| set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags); |
| qla2xxx_wake_dpc(vha); |
| } else { |
| qla82xx_check_fw_alive(vha); |
| } |
| } |
| } |
| |
| int qla82xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr) |
| { |
| int rval; |
| rval = qla82xx_device_state_handler(vha); |
| return rval; |
| } |
| |
| /* |
| * qla82xx_abort_isp |
| * Resets ISP and aborts all outstanding commands. |
| * |
| * Input: |
| * ha = adapter block pointer. |
| * |
| * Returns: |
| * 0 = success |
| */ |
| int |
| qla82xx_abort_isp(scsi_qla_host_t *vha) |
| { |
| int rval; |
| struct qla_hw_data *ha = vha->hw; |
| uint32_t dev_state; |
| |
| if (vha->device_flags & DFLG_DEV_FAILED) { |
| qla_printk(KERN_WARNING, ha, |
| "%s(%ld): Device in failed state, " |
| "Exiting.\n", __func__, vha->host_no); |
| return QLA_SUCCESS; |
| } |
| |
| qla82xx_idc_lock(ha); |
| dev_state = qla82xx_rd_32(ha, QLA82XX_CRB_DEV_STATE); |
| if (dev_state == QLA82XX_DEV_READY) { |
| qla_printk(KERN_INFO, ha, "HW State: NEED RESET\n"); |
| qla82xx_wr_32(ha, QLA82XX_CRB_DEV_STATE, |
| QLA82XX_DEV_NEED_RESET); |
| } else |
| qla_printk(KERN_INFO, ha, "HW State: %s\n", |
| dev_state < MAX_STATES ? |
| qdev_state[dev_state] : "Unknown"); |
| qla82xx_idc_unlock(ha); |
| |
| rval = qla82xx_device_state_handler(vha); |
| |
| qla82xx_idc_lock(ha); |
| qla82xx_clear_rst_ready(ha); |
| qla82xx_idc_unlock(ha); |
| |
| if (rval == QLA_SUCCESS) |
| qla82xx_restart_isp(vha); |
| |
| if (rval) { |
| vha->flags.online = 1; |
| if (test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) { |
| if (ha->isp_abort_cnt == 0) { |
| qla_printk(KERN_WARNING, ha, |
| "ISP error recovery failed - " |
| "board disabled\n"); |
| /* |
| * The next call disables the board |
| * completely. |
| */ |
| ha->isp_ops->reset_adapter(vha); |
| vha->flags.online = 0; |
| clear_bit(ISP_ABORT_RETRY, |
| &vha->dpc_flags); |
| rval = QLA_SUCCESS; |
| } else { /* schedule another ISP abort */ |
| ha->isp_abort_cnt--; |
| DEBUG(qla_printk(KERN_INFO, ha, |
| "qla%ld: ISP abort - retry remaining %d\n", |
| vha->host_no, ha->isp_abort_cnt)); |
| rval = QLA_FUNCTION_FAILED; |
| } |
| } else { |
| ha->isp_abort_cnt = MAX_RETRIES_OF_ISP_ABORT; |
| DEBUG(qla_printk(KERN_INFO, ha, |
| "(%ld): ISP error recovery - retrying (%d) " |
| "more times\n", vha->host_no, ha->isp_abort_cnt)); |
| set_bit(ISP_ABORT_RETRY, &vha->dpc_flags); |
| rval = QLA_FUNCTION_FAILED; |
| } |
| } |
| return rval; |
| } |
| |
| /* |
| * qla82xx_fcoe_ctx_reset |
| * Perform a quick reset and aborts all outstanding commands. |
| * This will only perform an FCoE context reset and avoids a full blown |
| * chip reset. |
| * |
| * Input: |
| * ha = adapter block pointer. |
| * is_reset_path = flag for identifying the reset path. |
| * |
| * Returns: |
| * 0 = success |
| */ |
| int qla82xx_fcoe_ctx_reset(scsi_qla_host_t *vha) |
| { |
| int rval = QLA_FUNCTION_FAILED; |
| |
| if (vha->flags.online) { |
| /* Abort all outstanding commands, so as to be requeued later */ |
| qla2x00_abort_isp_cleanup(vha); |
| } |
| |
| /* Stop currently executing firmware. |
| * This will destroy existing FCoE context at the F/W end. |
| */ |
| qla2x00_try_to_stop_firmware(vha); |
| |
| /* Restart. Creates a new FCoE context on INIT_FIRMWARE. */ |
| rval = qla82xx_restart_isp(vha); |
| |
| return rval; |
| } |
| |
| /* |
| * qla2x00_wait_for_fcoe_ctx_reset |
| * Wait till the FCoE context is reset. |
| * |
| * Note: |
| * Does context switching here. |
| * Release SPIN_LOCK (if any) before calling this routine. |
| * |
| * Return: |
| * Success (fcoe_ctx reset is done) : 0 |
| * Failed (fcoe_ctx reset not completed within max loop timout ) : 1 |
| */ |
| int qla2x00_wait_for_fcoe_ctx_reset(scsi_qla_host_t *vha) |
| { |
| int status = QLA_FUNCTION_FAILED; |
| unsigned long wait_reset; |
| |
| wait_reset = jiffies + (MAX_LOOP_TIMEOUT * HZ); |
| while ((test_bit(FCOE_CTX_RESET_NEEDED, &vha->dpc_flags) || |
| test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags)) |
| && time_before(jiffies, wait_reset)) { |
| |
| set_current_state(TASK_UNINTERRUPTIBLE); |
| schedule_timeout(HZ); |
| |
| if (!test_bit(FCOE_CTX_RESET_NEEDED, &vha->dpc_flags) && |
| !test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags)) { |
| status = QLA_SUCCESS; |
| break; |
| } |
| } |
| DEBUG2(printk(KERN_INFO |
| "%s status=%d\n", __func__, status)); |
| |
| return status; |
| } |