| /* |
| * Copyright(c) 2007 - 2008 Intel Corporation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms and conditions of the GNU General Public License, |
| * version 2, as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program; if not, write to the Free Software Foundation, Inc., |
| * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. |
| * |
| * Maintained at www.Open-FCoE.org |
| */ |
| |
| /* |
| * RPORT GENERAL INFO |
| * |
| * This file contains all processing regarding fc_rports. It contains the |
| * rport state machine and does all rport interaction with the transport class. |
| * There should be no other places in libfc that interact directly with the |
| * transport class in regards to adding and deleting rports. |
| * |
| * fc_rport's represent N_Port's within the fabric. |
| */ |
| |
| /* |
| * RPORT LOCKING |
| * |
| * The rport should never hold the rport mutex and then attempt to acquire |
| * either the lport or disc mutexes. The rport's mutex is considered lesser |
| * than both the lport's mutex and the disc mutex. Refer to fc_lport.c for |
| * more comments on the heirarchy. |
| * |
| * The locking strategy is similar to the lport's strategy. The lock protects |
| * the rport's states and is held and released by the entry points to the rport |
| * block. All _enter_* functions correspond to rport states and expect the rport |
| * mutex to be locked before calling them. This means that rports only handle |
| * one request or response at a time, since they're not critical for the I/O |
| * path this potential over-use of the mutex is acceptable. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/spinlock.h> |
| #include <linux/interrupt.h> |
| #include <linux/slab.h> |
| #include <linux/rcupdate.h> |
| #include <linux/timer.h> |
| #include <linux/workqueue.h> |
| #include <asm/unaligned.h> |
| |
| #include <scsi/libfc.h> |
| #include <scsi/fc_encode.h> |
| |
| #include "fc_libfc.h" |
| |
| struct workqueue_struct *rport_event_queue; |
| |
| static void fc_rport_enter_plogi(struct fc_rport_priv *); |
| static void fc_rport_enter_prli(struct fc_rport_priv *); |
| static void fc_rport_enter_rtv(struct fc_rport_priv *); |
| static void fc_rport_enter_ready(struct fc_rport_priv *); |
| static void fc_rport_enter_logo(struct fc_rport_priv *); |
| static void fc_rport_enter_adisc(struct fc_rport_priv *); |
| |
| static void fc_rport_recv_plogi_req(struct fc_lport *, |
| struct fc_seq *, struct fc_frame *); |
| static void fc_rport_recv_prli_req(struct fc_rport_priv *, |
| struct fc_seq *, struct fc_frame *); |
| static void fc_rport_recv_prlo_req(struct fc_rport_priv *, |
| struct fc_seq *, struct fc_frame *); |
| static void fc_rport_recv_logo_req(struct fc_lport *, |
| struct fc_seq *, struct fc_frame *); |
| static void fc_rport_timeout(struct work_struct *); |
| static void fc_rport_error(struct fc_rport_priv *, struct fc_frame *); |
| static void fc_rport_error_retry(struct fc_rport_priv *, struct fc_frame *); |
| static void fc_rport_work(struct work_struct *); |
| |
| static const char *fc_rport_state_names[] = { |
| [RPORT_ST_INIT] = "Init", |
| [RPORT_ST_PLOGI] = "PLOGI", |
| [RPORT_ST_PRLI] = "PRLI", |
| [RPORT_ST_RTV] = "RTV", |
| [RPORT_ST_READY] = "Ready", |
| [RPORT_ST_LOGO] = "LOGO", |
| [RPORT_ST_ADISC] = "ADISC", |
| [RPORT_ST_DELETE] = "Delete", |
| [RPORT_ST_RESTART] = "Restart", |
| }; |
| |
| /** |
| * fc_rport_lookup() - Lookup a remote port by port_id |
| * @lport: The local port to lookup the remote port on |
| * @port_id: The remote port ID to look up |
| */ |
| static struct fc_rport_priv *fc_rport_lookup(const struct fc_lport *lport, |
| u32 port_id) |
| { |
| struct fc_rport_priv *rdata; |
| |
| list_for_each_entry(rdata, &lport->disc.rports, peers) |
| if (rdata->ids.port_id == port_id) |
| return rdata; |
| return NULL; |
| } |
| |
| /** |
| * fc_rport_create() - Create a new remote port |
| * @lport: The local port this remote port will be associated with |
| * @ids: The identifiers for the new remote port |
| * |
| * The remote port will start in the INIT state. |
| * |
| * Locking note: must be called with the disc_mutex held. |
| */ |
| static struct fc_rport_priv *fc_rport_create(struct fc_lport *lport, |
| u32 port_id) |
| { |
| struct fc_rport_priv *rdata; |
| |
| rdata = lport->tt.rport_lookup(lport, port_id); |
| if (rdata) |
| return rdata; |
| |
| rdata = kzalloc(sizeof(*rdata), GFP_KERNEL); |
| if (!rdata) |
| return NULL; |
| |
| rdata->ids.node_name = -1; |
| rdata->ids.port_name = -1; |
| rdata->ids.port_id = port_id; |
| rdata->ids.roles = FC_RPORT_ROLE_UNKNOWN; |
| |
| kref_init(&rdata->kref); |
| mutex_init(&rdata->rp_mutex); |
| rdata->local_port = lport; |
| rdata->rp_state = RPORT_ST_INIT; |
| rdata->event = RPORT_EV_NONE; |
| rdata->flags = FC_RP_FLAGS_REC_SUPPORTED; |
| rdata->e_d_tov = lport->e_d_tov; |
| rdata->r_a_tov = lport->r_a_tov; |
| rdata->maxframe_size = FC_MIN_MAX_PAYLOAD; |
| INIT_DELAYED_WORK(&rdata->retry_work, fc_rport_timeout); |
| INIT_WORK(&rdata->event_work, fc_rport_work); |
| if (port_id != FC_FID_DIR_SERV) |
| list_add(&rdata->peers, &lport->disc.rports); |
| return rdata; |
| } |
| |
| /** |
| * fc_rport_destroy() - Free a remote port after last reference is released |
| * @kref: The remote port's kref |
| */ |
| static void fc_rport_destroy(struct kref *kref) |
| { |
| struct fc_rport_priv *rdata; |
| |
| rdata = container_of(kref, struct fc_rport_priv, kref); |
| kfree(rdata); |
| } |
| |
| /** |
| * fc_rport_state() - Return a string identifying the remote port's state |
| * @rdata: The remote port |
| */ |
| static const char *fc_rport_state(struct fc_rport_priv *rdata) |
| { |
| const char *cp; |
| |
| cp = fc_rport_state_names[rdata->rp_state]; |
| if (!cp) |
| cp = "Unknown"; |
| return cp; |
| } |
| |
| /** |
| * fc_set_rport_loss_tmo() - Set the remote port loss timeout |
| * @rport: The remote port that gets a new timeout value |
| * @timeout: The new timeout value (in seconds) |
| */ |
| void fc_set_rport_loss_tmo(struct fc_rport *rport, u32 timeout) |
| { |
| if (timeout) |
| rport->dev_loss_tmo = timeout + 5; |
| else |
| rport->dev_loss_tmo = 30; |
| } |
| EXPORT_SYMBOL(fc_set_rport_loss_tmo); |
| |
| /** |
| * fc_plogi_get_maxframe() - Get the maximum payload from the common service |
| * parameters in a FLOGI frame |
| * @flp: The FLOGI payload |
| * @maxval: The maximum frame size upper limit; this may be less than what |
| * is in the service parameters |
| */ |
| static unsigned int fc_plogi_get_maxframe(struct fc_els_flogi *flp, |
| unsigned int maxval) |
| { |
| unsigned int mfs; |
| |
| /* |
| * Get max payload from the common service parameters and the |
| * class 3 receive data field size. |
| */ |
| mfs = ntohs(flp->fl_csp.sp_bb_data) & FC_SP_BB_DATA_MASK; |
| if (mfs >= FC_SP_MIN_MAX_PAYLOAD && mfs < maxval) |
| maxval = mfs; |
| mfs = ntohs(flp->fl_cssp[3 - 1].cp_rdfs); |
| if (mfs >= FC_SP_MIN_MAX_PAYLOAD && mfs < maxval) |
| maxval = mfs; |
| return maxval; |
| } |
| |
| /** |
| * fc_rport_state_enter() - Change the state of a remote port |
| * @rdata: The remote port whose state should change |
| * @new: The new state |
| * |
| * Locking Note: Called with the rport lock held |
| */ |
| static void fc_rport_state_enter(struct fc_rport_priv *rdata, |
| enum fc_rport_state new) |
| { |
| if (rdata->rp_state != new) |
| rdata->retries = 0; |
| rdata->rp_state = new; |
| } |
| |
| /** |
| * fc_rport_work() - Handler for remote port events in the rport_event_queue |
| * @work: Handle to the remote port being dequeued |
| */ |
| static void fc_rport_work(struct work_struct *work) |
| { |
| u32 port_id; |
| struct fc_rport_priv *rdata = |
| container_of(work, struct fc_rport_priv, event_work); |
| struct fc_rport_libfc_priv *rpriv; |
| enum fc_rport_event event; |
| struct fc_lport *lport = rdata->local_port; |
| struct fc_rport_operations *rport_ops; |
| struct fc_rport_identifiers ids; |
| struct fc_rport *rport; |
| int restart = 0; |
| |
| mutex_lock(&rdata->rp_mutex); |
| event = rdata->event; |
| rport_ops = rdata->ops; |
| rport = rdata->rport; |
| |
| FC_RPORT_DBG(rdata, "work event %u\n", event); |
| |
| switch (event) { |
| case RPORT_EV_READY: |
| ids = rdata->ids; |
| rdata->event = RPORT_EV_NONE; |
| kref_get(&rdata->kref); |
| mutex_unlock(&rdata->rp_mutex); |
| |
| if (!rport) |
| rport = fc_remote_port_add(lport->host, 0, &ids); |
| if (!rport) { |
| FC_RPORT_DBG(rdata, "Failed to add the rport\n"); |
| lport->tt.rport_logoff(rdata); |
| kref_put(&rdata->kref, lport->tt.rport_destroy); |
| return; |
| } |
| mutex_lock(&rdata->rp_mutex); |
| if (rdata->rport) |
| FC_RPORT_DBG(rdata, "rport already allocated\n"); |
| rdata->rport = rport; |
| rport->maxframe_size = rdata->maxframe_size; |
| rport->supported_classes = rdata->supported_classes; |
| |
| rpriv = rport->dd_data; |
| rpriv->local_port = lport; |
| rpriv->rp_state = rdata->rp_state; |
| rpriv->flags = rdata->flags; |
| rpriv->e_d_tov = rdata->e_d_tov; |
| rpriv->r_a_tov = rdata->r_a_tov; |
| mutex_unlock(&rdata->rp_mutex); |
| |
| if (rport_ops && rport_ops->event_callback) { |
| FC_RPORT_DBG(rdata, "callback ev %d\n", event); |
| rport_ops->event_callback(lport, rdata, event); |
| } |
| kref_put(&rdata->kref, lport->tt.rport_destroy); |
| break; |
| |
| case RPORT_EV_FAILED: |
| case RPORT_EV_LOGO: |
| case RPORT_EV_STOP: |
| port_id = rdata->ids.port_id; |
| mutex_unlock(&rdata->rp_mutex); |
| |
| if (port_id != FC_FID_DIR_SERV) { |
| /* |
| * We must drop rp_mutex before taking disc_mutex. |
| * Re-evaluate state to allow for restart. |
| * A transition to RESTART state must only happen |
| * while disc_mutex is held and rdata is on the list. |
| */ |
| mutex_lock(&lport->disc.disc_mutex); |
| mutex_lock(&rdata->rp_mutex); |
| if (rdata->rp_state == RPORT_ST_RESTART) |
| restart = 1; |
| else |
| list_del(&rdata->peers); |
| rdata->event = RPORT_EV_NONE; |
| mutex_unlock(&rdata->rp_mutex); |
| mutex_unlock(&lport->disc.disc_mutex); |
| } |
| |
| if (rport_ops && rport_ops->event_callback) { |
| FC_RPORT_DBG(rdata, "callback ev %d\n", event); |
| rport_ops->event_callback(lport, rdata, event); |
| } |
| cancel_delayed_work_sync(&rdata->retry_work); |
| |
| /* |
| * Reset any outstanding exchanges before freeing rport. |
| */ |
| lport->tt.exch_mgr_reset(lport, 0, port_id); |
| lport->tt.exch_mgr_reset(lport, port_id, 0); |
| |
| if (rport) { |
| rpriv = rport->dd_data; |
| rpriv->rp_state = RPORT_ST_DELETE; |
| mutex_lock(&rdata->rp_mutex); |
| rdata->rport = NULL; |
| mutex_unlock(&rdata->rp_mutex); |
| fc_remote_port_delete(rport); |
| } |
| if (restart) { |
| mutex_lock(&rdata->rp_mutex); |
| FC_RPORT_DBG(rdata, "work restart\n"); |
| fc_rport_enter_plogi(rdata); |
| mutex_unlock(&rdata->rp_mutex); |
| } else |
| kref_put(&rdata->kref, lport->tt.rport_destroy); |
| break; |
| |
| default: |
| mutex_unlock(&rdata->rp_mutex); |
| break; |
| } |
| } |
| |
| /** |
| * fc_rport_login() - Start the remote port login state machine |
| * @rdata: The remote port to be logged in to |
| * |
| * Locking Note: Called without the rport lock held. This |
| * function will hold the rport lock, call an _enter_* |
| * function and then unlock the rport. |
| * |
| * This indicates the intent to be logged into the remote port. |
| * If it appears we are already logged in, ADISC is used to verify |
| * the setup. |
| */ |
| int fc_rport_login(struct fc_rport_priv *rdata) |
| { |
| mutex_lock(&rdata->rp_mutex); |
| |
| switch (rdata->rp_state) { |
| case RPORT_ST_READY: |
| FC_RPORT_DBG(rdata, "ADISC port\n"); |
| fc_rport_enter_adisc(rdata); |
| break; |
| case RPORT_ST_RESTART: |
| break; |
| case RPORT_ST_DELETE: |
| FC_RPORT_DBG(rdata, "Restart deleted port\n"); |
| fc_rport_state_enter(rdata, RPORT_ST_RESTART); |
| break; |
| default: |
| FC_RPORT_DBG(rdata, "Login to port\n"); |
| fc_rport_enter_plogi(rdata); |
| break; |
| } |
| mutex_unlock(&rdata->rp_mutex); |
| |
| return 0; |
| } |
| |
| /** |
| * fc_rport_enter_delete() - Schedule a remote port to be deleted |
| * @rdata: The remote port to be deleted |
| * @event: The event to report as the reason for deletion |
| * |
| * Locking Note: Called with the rport lock held. |
| * |
| * Allow state change into DELETE only once. |
| * |
| * Call queue_work only if there's no event already pending. |
| * Set the new event so that the old pending event will not occur. |
| * Since we have the mutex, even if fc_rport_work() is already started, |
| * it'll see the new event. |
| */ |
| static void fc_rport_enter_delete(struct fc_rport_priv *rdata, |
| enum fc_rport_event event) |
| { |
| if (rdata->rp_state == RPORT_ST_DELETE) |
| return; |
| |
| FC_RPORT_DBG(rdata, "Delete port\n"); |
| |
| fc_rport_state_enter(rdata, RPORT_ST_DELETE); |
| |
| if (rdata->event == RPORT_EV_NONE) |
| queue_work(rport_event_queue, &rdata->event_work); |
| rdata->event = event; |
| } |
| |
| /** |
| * fc_rport_logoff() - Logoff and remove a remote port |
| * @rdata: The remote port to be logged off of |
| * |
| * Locking Note: Called without the rport lock held. This |
| * function will hold the rport lock, call an _enter_* |
| * function and then unlock the rport. |
| */ |
| int fc_rport_logoff(struct fc_rport_priv *rdata) |
| { |
| mutex_lock(&rdata->rp_mutex); |
| |
| FC_RPORT_DBG(rdata, "Remove port\n"); |
| |
| if (rdata->rp_state == RPORT_ST_DELETE) { |
| FC_RPORT_DBG(rdata, "Port in Delete state, not removing\n"); |
| goto out; |
| } |
| |
| if (rdata->rp_state == RPORT_ST_RESTART) |
| FC_RPORT_DBG(rdata, "Port in Restart state, deleting\n"); |
| else |
| fc_rport_enter_logo(rdata); |
| |
| /* |
| * Change the state to Delete so that we discard |
| * the response. |
| */ |
| fc_rport_enter_delete(rdata, RPORT_EV_STOP); |
| out: |
| mutex_unlock(&rdata->rp_mutex); |
| return 0; |
| } |
| |
| /** |
| * fc_rport_enter_ready() - Transition to the RPORT_ST_READY state |
| * @rdata: The remote port that is ready |
| * |
| * Locking Note: The rport lock is expected to be held before calling |
| * this routine. |
| */ |
| static void fc_rport_enter_ready(struct fc_rport_priv *rdata) |
| { |
| fc_rport_state_enter(rdata, RPORT_ST_READY); |
| |
| FC_RPORT_DBG(rdata, "Port is Ready\n"); |
| |
| if (rdata->event == RPORT_EV_NONE) |
| queue_work(rport_event_queue, &rdata->event_work); |
| rdata->event = RPORT_EV_READY; |
| } |
| |
| /** |
| * fc_rport_timeout() - Handler for the retry_work timer |
| * @work: Handle to the remote port that has timed out |
| * |
| * Locking Note: Called without the rport lock held. This |
| * function will hold the rport lock, call an _enter_* |
| * function and then unlock the rport. |
| */ |
| static void fc_rport_timeout(struct work_struct *work) |
| { |
| struct fc_rport_priv *rdata = |
| container_of(work, struct fc_rport_priv, retry_work.work); |
| |
| mutex_lock(&rdata->rp_mutex); |
| |
| switch (rdata->rp_state) { |
| case RPORT_ST_PLOGI: |
| fc_rport_enter_plogi(rdata); |
| break; |
| case RPORT_ST_PRLI: |
| fc_rport_enter_prli(rdata); |
| break; |
| case RPORT_ST_RTV: |
| fc_rport_enter_rtv(rdata); |
| break; |
| case RPORT_ST_LOGO: |
| fc_rport_enter_logo(rdata); |
| break; |
| case RPORT_ST_ADISC: |
| fc_rport_enter_adisc(rdata); |
| break; |
| case RPORT_ST_READY: |
| case RPORT_ST_INIT: |
| case RPORT_ST_DELETE: |
| case RPORT_ST_RESTART: |
| break; |
| } |
| |
| mutex_unlock(&rdata->rp_mutex); |
| } |
| |
| /** |
| * fc_rport_error() - Error handler, called once retries have been exhausted |
| * @rdata: The remote port the error is happened on |
| * @fp: The error code encapsulated in a frame pointer |
| * |
| * Locking Note: The rport lock is expected to be held before |
| * calling this routine |
| */ |
| static void fc_rport_error(struct fc_rport_priv *rdata, struct fc_frame *fp) |
| { |
| FC_RPORT_DBG(rdata, "Error %ld in state %s, retries %d\n", |
| IS_ERR(fp) ? -PTR_ERR(fp) : 0, |
| fc_rport_state(rdata), rdata->retries); |
| |
| switch (rdata->rp_state) { |
| case RPORT_ST_PLOGI: |
| case RPORT_ST_LOGO: |
| fc_rport_enter_delete(rdata, RPORT_EV_FAILED); |
| break; |
| case RPORT_ST_RTV: |
| fc_rport_enter_ready(rdata); |
| break; |
| case RPORT_ST_PRLI: |
| case RPORT_ST_ADISC: |
| fc_rport_enter_logo(rdata); |
| break; |
| case RPORT_ST_DELETE: |
| case RPORT_ST_RESTART: |
| case RPORT_ST_READY: |
| case RPORT_ST_INIT: |
| break; |
| } |
| } |
| |
| /** |
| * fc_rport_error_retry() - Handler for remote port state retries |
| * @rdata: The remote port whose state is to be retried |
| * @fp: The error code encapsulated in a frame pointer |
| * |
| * If the error was an exchange timeout retry immediately, |
| * otherwise wait for E_D_TOV. |
| * |
| * Locking Note: The rport lock is expected to be held before |
| * calling this routine |
| */ |
| static void fc_rport_error_retry(struct fc_rport_priv *rdata, |
| struct fc_frame *fp) |
| { |
| unsigned long delay = FC_DEF_E_D_TOV; |
| |
| /* make sure this isn't an FC_EX_CLOSED error, never retry those */ |
| if (PTR_ERR(fp) == -FC_EX_CLOSED) |
| return fc_rport_error(rdata, fp); |
| |
| if (rdata->retries < rdata->local_port->max_rport_retry_count) { |
| FC_RPORT_DBG(rdata, "Error %ld in state %s, retrying\n", |
| PTR_ERR(fp), fc_rport_state(rdata)); |
| rdata->retries++; |
| /* no additional delay on exchange timeouts */ |
| if (PTR_ERR(fp) == -FC_EX_TIMEOUT) |
| delay = 0; |
| schedule_delayed_work(&rdata->retry_work, delay); |
| return; |
| } |
| |
| return fc_rport_error(rdata, fp); |
| } |
| |
| /** |
| * fc_rport_plogi_recv_resp() - Handler for ELS PLOGI responses |
| * @sp: The sequence the PLOGI is on |
| * @fp: The PLOGI response frame |
| * @rdata_arg: The remote port that sent the PLOGI response |
| * |
| * Locking Note: This function will be called without the rport lock |
| * held, but it will lock, call an _enter_* function or fc_rport_error |
| * and then unlock the rport. |
| */ |
| static void fc_rport_plogi_resp(struct fc_seq *sp, struct fc_frame *fp, |
| void *rdata_arg) |
| { |
| struct fc_rport_priv *rdata = rdata_arg; |
| struct fc_lport *lport = rdata->local_port; |
| struct fc_els_flogi *plp = NULL; |
| unsigned int tov; |
| u16 csp_seq; |
| u16 cssp_seq; |
| u8 op; |
| |
| mutex_lock(&rdata->rp_mutex); |
| |
| FC_RPORT_DBG(rdata, "Received a PLOGI %s\n", fc_els_resp_type(fp)); |
| |
| if (rdata->rp_state != RPORT_ST_PLOGI) { |
| FC_RPORT_DBG(rdata, "Received a PLOGI response, but in state " |
| "%s\n", fc_rport_state(rdata)); |
| if (IS_ERR(fp)) |
| goto err; |
| goto out; |
| } |
| |
| if (IS_ERR(fp)) { |
| fc_rport_error_retry(rdata, fp); |
| goto err; |
| } |
| |
| op = fc_frame_payload_op(fp); |
| if (op == ELS_LS_ACC && |
| (plp = fc_frame_payload_get(fp, sizeof(*plp))) != NULL) { |
| rdata->ids.port_name = get_unaligned_be64(&plp->fl_wwpn); |
| rdata->ids.node_name = get_unaligned_be64(&plp->fl_wwnn); |
| |
| tov = ntohl(plp->fl_csp.sp_e_d_tov); |
| if (ntohs(plp->fl_csp.sp_features) & FC_SP_FT_EDTR) |
| tov /= 1000000; |
| if (tov > rdata->e_d_tov) |
| rdata->e_d_tov = tov; |
| csp_seq = ntohs(plp->fl_csp.sp_tot_seq); |
| cssp_seq = ntohs(plp->fl_cssp[3 - 1].cp_con_seq); |
| if (cssp_seq < csp_seq) |
| csp_seq = cssp_seq; |
| rdata->max_seq = csp_seq; |
| rdata->maxframe_size = fc_plogi_get_maxframe(plp, lport->mfs); |
| fc_rport_enter_prli(rdata); |
| } else |
| fc_rport_error_retry(rdata, fp); |
| |
| out: |
| fc_frame_free(fp); |
| err: |
| mutex_unlock(&rdata->rp_mutex); |
| kref_put(&rdata->kref, rdata->local_port->tt.rport_destroy); |
| } |
| |
| /** |
| * fc_rport_enter_plogi() - Send Port Login (PLOGI) request |
| * @rdata: The remote port to send a PLOGI to |
| * |
| * Locking Note: The rport lock is expected to be held before calling |
| * this routine. |
| */ |
| static void fc_rport_enter_plogi(struct fc_rport_priv *rdata) |
| { |
| struct fc_lport *lport = rdata->local_port; |
| struct fc_frame *fp; |
| |
| FC_RPORT_DBG(rdata, "Port entered PLOGI state from %s state\n", |
| fc_rport_state(rdata)); |
| |
| fc_rport_state_enter(rdata, RPORT_ST_PLOGI); |
| |
| rdata->maxframe_size = FC_MIN_MAX_PAYLOAD; |
| fp = fc_frame_alloc(lport, sizeof(struct fc_els_flogi)); |
| if (!fp) { |
| fc_rport_error_retry(rdata, fp); |
| return; |
| } |
| rdata->e_d_tov = lport->e_d_tov; |
| |
| if (!lport->tt.elsct_send(lport, rdata->ids.port_id, fp, ELS_PLOGI, |
| fc_rport_plogi_resp, rdata, |
| 2 * lport->r_a_tov)) |
| fc_rport_error_retry(rdata, NULL); |
| else |
| kref_get(&rdata->kref); |
| } |
| |
| /** |
| * fc_rport_prli_resp() - Process Login (PRLI) response handler |
| * @sp: The sequence the PRLI response was on |
| * @fp: The PRLI response frame |
| * @rdata_arg: The remote port that sent the PRLI response |
| * |
| * Locking Note: This function will be called without the rport lock |
| * held, but it will lock, call an _enter_* function or fc_rport_error |
| * and then unlock the rport. |
| */ |
| static void fc_rport_prli_resp(struct fc_seq *sp, struct fc_frame *fp, |
| void *rdata_arg) |
| { |
| struct fc_rport_priv *rdata = rdata_arg; |
| struct { |
| struct fc_els_prli prli; |
| struct fc_els_spp spp; |
| } *pp; |
| u32 roles = FC_RPORT_ROLE_UNKNOWN; |
| u32 fcp_parm = 0; |
| u8 op; |
| |
| mutex_lock(&rdata->rp_mutex); |
| |
| FC_RPORT_DBG(rdata, "Received a PRLI %s\n", fc_els_resp_type(fp)); |
| |
| if (rdata->rp_state != RPORT_ST_PRLI) { |
| FC_RPORT_DBG(rdata, "Received a PRLI response, but in state " |
| "%s\n", fc_rport_state(rdata)); |
| if (IS_ERR(fp)) |
| goto err; |
| goto out; |
| } |
| |
| if (IS_ERR(fp)) { |
| fc_rport_error_retry(rdata, fp); |
| goto err; |
| } |
| |
| /* reinitialize remote port roles */ |
| rdata->ids.roles = FC_RPORT_ROLE_UNKNOWN; |
| |
| op = fc_frame_payload_op(fp); |
| if (op == ELS_LS_ACC) { |
| pp = fc_frame_payload_get(fp, sizeof(*pp)); |
| if (pp && pp->prli.prli_spp_len >= sizeof(pp->spp)) { |
| fcp_parm = ntohl(pp->spp.spp_params); |
| if (fcp_parm & FCP_SPPF_RETRY) |
| rdata->flags |= FC_RP_FLAGS_RETRY; |
| } |
| |
| rdata->supported_classes = FC_COS_CLASS3; |
| if (fcp_parm & FCP_SPPF_INIT_FCN) |
| roles |= FC_RPORT_ROLE_FCP_INITIATOR; |
| if (fcp_parm & FCP_SPPF_TARG_FCN) |
| roles |= FC_RPORT_ROLE_FCP_TARGET; |
| |
| rdata->ids.roles = roles; |
| fc_rport_enter_rtv(rdata); |
| |
| } else { |
| FC_RPORT_DBG(rdata, "Bad ELS response for PRLI command\n"); |
| fc_rport_enter_delete(rdata, RPORT_EV_FAILED); |
| } |
| |
| out: |
| fc_frame_free(fp); |
| err: |
| mutex_unlock(&rdata->rp_mutex); |
| kref_put(&rdata->kref, rdata->local_port->tt.rport_destroy); |
| } |
| |
| /** |
| * fc_rport_logo_resp() - Handler for logout (LOGO) responses |
| * @sp: The sequence the LOGO was on |
| * @fp: The LOGO response frame |
| * @rdata_arg: The remote port that sent the LOGO response |
| * |
| * Locking Note: This function will be called without the rport lock |
| * held, but it will lock, call an _enter_* function or fc_rport_error |
| * and then unlock the rport. |
| */ |
| static void fc_rport_logo_resp(struct fc_seq *sp, struct fc_frame *fp, |
| void *rdata_arg) |
| { |
| struct fc_rport_priv *rdata = rdata_arg; |
| u8 op; |
| |
| mutex_lock(&rdata->rp_mutex); |
| |
| FC_RPORT_DBG(rdata, "Received a LOGO %s\n", fc_els_resp_type(fp)); |
| |
| if (rdata->rp_state != RPORT_ST_LOGO) { |
| FC_RPORT_DBG(rdata, "Received a LOGO response, but in state " |
| "%s\n", fc_rport_state(rdata)); |
| if (IS_ERR(fp)) |
| goto err; |
| goto out; |
| } |
| |
| if (IS_ERR(fp)) { |
| fc_rport_error_retry(rdata, fp); |
| goto err; |
| } |
| |
| op = fc_frame_payload_op(fp); |
| if (op != ELS_LS_ACC) |
| FC_RPORT_DBG(rdata, "Bad ELS response op %x for LOGO command\n", |
| op); |
| fc_rport_enter_delete(rdata, RPORT_EV_LOGO); |
| |
| out: |
| fc_frame_free(fp); |
| err: |
| mutex_unlock(&rdata->rp_mutex); |
| kref_put(&rdata->kref, rdata->local_port->tt.rport_destroy); |
| } |
| |
| /** |
| * fc_rport_enter_prli() - Send Process Login (PRLI) request |
| * @rdata: The remote port to send the PRLI request to |
| * |
| * Locking Note: The rport lock is expected to be held before calling |
| * this routine. |
| */ |
| static void fc_rport_enter_prli(struct fc_rport_priv *rdata) |
| { |
| struct fc_lport *lport = rdata->local_port; |
| struct { |
| struct fc_els_prli prli; |
| struct fc_els_spp spp; |
| } *pp; |
| struct fc_frame *fp; |
| |
| /* |
| * If the rport is one of the well known addresses |
| * we skip PRLI and RTV and go straight to READY. |
| */ |
| if (rdata->ids.port_id >= FC_FID_DOM_MGR) { |
| fc_rport_enter_ready(rdata); |
| return; |
| } |
| |
| FC_RPORT_DBG(rdata, "Port entered PRLI state from %s state\n", |
| fc_rport_state(rdata)); |
| |
| fc_rport_state_enter(rdata, RPORT_ST_PRLI); |
| |
| fp = fc_frame_alloc(lport, sizeof(*pp)); |
| if (!fp) { |
| fc_rport_error_retry(rdata, fp); |
| return; |
| } |
| |
| if (!lport->tt.elsct_send(lport, rdata->ids.port_id, fp, ELS_PRLI, |
| fc_rport_prli_resp, rdata, |
| 2 * lport->r_a_tov)) |
| fc_rport_error_retry(rdata, NULL); |
| else |
| kref_get(&rdata->kref); |
| } |
| |
| /** |
| * fc_rport_els_rtv_resp() - Handler for Request Timeout Value (RTV) responses |
| * @sp: The sequence the RTV was on |
| * @fp: The RTV response frame |
| * @rdata_arg: The remote port that sent the RTV response |
| * |
| * Many targets don't seem to support this. |
| * |
| * Locking Note: This function will be called without the rport lock |
| * held, but it will lock, call an _enter_* function or fc_rport_error |
| * and then unlock the rport. |
| */ |
| static void fc_rport_rtv_resp(struct fc_seq *sp, struct fc_frame *fp, |
| void *rdata_arg) |
| { |
| struct fc_rport_priv *rdata = rdata_arg; |
| u8 op; |
| |
| mutex_lock(&rdata->rp_mutex); |
| |
| FC_RPORT_DBG(rdata, "Received a RTV %s\n", fc_els_resp_type(fp)); |
| |
| if (rdata->rp_state != RPORT_ST_RTV) { |
| FC_RPORT_DBG(rdata, "Received a RTV response, but in state " |
| "%s\n", fc_rport_state(rdata)); |
| if (IS_ERR(fp)) |
| goto err; |
| goto out; |
| } |
| |
| if (IS_ERR(fp)) { |
| fc_rport_error(rdata, fp); |
| goto err; |
| } |
| |
| op = fc_frame_payload_op(fp); |
| if (op == ELS_LS_ACC) { |
| struct fc_els_rtv_acc *rtv; |
| u32 toq; |
| u32 tov; |
| |
| rtv = fc_frame_payload_get(fp, sizeof(*rtv)); |
| if (rtv) { |
| toq = ntohl(rtv->rtv_toq); |
| tov = ntohl(rtv->rtv_r_a_tov); |
| if (tov == 0) |
| tov = 1; |
| rdata->r_a_tov = tov; |
| tov = ntohl(rtv->rtv_e_d_tov); |
| if (toq & FC_ELS_RTV_EDRES) |
| tov /= 1000000; |
| if (tov == 0) |
| tov = 1; |
| rdata->e_d_tov = tov; |
| } |
| } |
| |
| fc_rport_enter_ready(rdata); |
| |
| out: |
| fc_frame_free(fp); |
| err: |
| mutex_unlock(&rdata->rp_mutex); |
| kref_put(&rdata->kref, rdata->local_port->tt.rport_destroy); |
| } |
| |
| /** |
| * fc_rport_enter_rtv() - Send Request Timeout Value (RTV) request |
| * @rdata: The remote port to send the RTV request to |
| * |
| * Locking Note: The rport lock is expected to be held before calling |
| * this routine. |
| */ |
| static void fc_rport_enter_rtv(struct fc_rport_priv *rdata) |
| { |
| struct fc_frame *fp; |
| struct fc_lport *lport = rdata->local_port; |
| |
| FC_RPORT_DBG(rdata, "Port entered RTV state from %s state\n", |
| fc_rport_state(rdata)); |
| |
| fc_rport_state_enter(rdata, RPORT_ST_RTV); |
| |
| fp = fc_frame_alloc(lport, sizeof(struct fc_els_rtv)); |
| if (!fp) { |
| fc_rport_error_retry(rdata, fp); |
| return; |
| } |
| |
| if (!lport->tt.elsct_send(lport, rdata->ids.port_id, fp, ELS_RTV, |
| fc_rport_rtv_resp, rdata, |
| 2 * lport->r_a_tov)) |
| fc_rport_error_retry(rdata, NULL); |
| else |
| kref_get(&rdata->kref); |
| } |
| |
| /** |
| * fc_rport_enter_logo() - Send a logout (LOGO) request |
| * @rdata: The remote port to send the LOGO request to |
| * |
| * Locking Note: The rport lock is expected to be held before calling |
| * this routine. |
| */ |
| static void fc_rport_enter_logo(struct fc_rport_priv *rdata) |
| { |
| struct fc_lport *lport = rdata->local_port; |
| struct fc_frame *fp; |
| |
| FC_RPORT_DBG(rdata, "Port entered LOGO state from %s state\n", |
| fc_rport_state(rdata)); |
| |
| fc_rport_state_enter(rdata, RPORT_ST_LOGO); |
| |
| fp = fc_frame_alloc(lport, sizeof(struct fc_els_logo)); |
| if (!fp) { |
| fc_rport_error_retry(rdata, fp); |
| return; |
| } |
| |
| if (!lport->tt.elsct_send(lport, rdata->ids.port_id, fp, ELS_LOGO, |
| fc_rport_logo_resp, rdata, |
| 2 * lport->r_a_tov)) |
| fc_rport_error_retry(rdata, NULL); |
| else |
| kref_get(&rdata->kref); |
| } |
| |
| /** |
| * fc_rport_els_adisc_resp() - Handler for Address Discovery (ADISC) responses |
| * @sp: The sequence the ADISC response was on |
| * @fp: The ADISC response frame |
| * @rdata_arg: The remote port that sent the ADISC response |
| * |
| * Locking Note: This function will be called without the rport lock |
| * held, but it will lock, call an _enter_* function or fc_rport_error |
| * and then unlock the rport. |
| */ |
| static void fc_rport_adisc_resp(struct fc_seq *sp, struct fc_frame *fp, |
| void *rdata_arg) |
| { |
| struct fc_rport_priv *rdata = rdata_arg; |
| struct fc_els_adisc *adisc; |
| u8 op; |
| |
| mutex_lock(&rdata->rp_mutex); |
| |
| FC_RPORT_DBG(rdata, "Received a ADISC response\n"); |
| |
| if (rdata->rp_state != RPORT_ST_ADISC) { |
| FC_RPORT_DBG(rdata, "Received a ADISC resp but in state %s\n", |
| fc_rport_state(rdata)); |
| if (IS_ERR(fp)) |
| goto err; |
| goto out; |
| } |
| |
| if (IS_ERR(fp)) { |
| fc_rport_error(rdata, fp); |
| goto err; |
| } |
| |
| /* |
| * If address verification failed. Consider us logged out of the rport. |
| * Since the rport is still in discovery, we want to be |
| * logged in, so go to PLOGI state. Otherwise, go back to READY. |
| */ |
| op = fc_frame_payload_op(fp); |
| adisc = fc_frame_payload_get(fp, sizeof(*adisc)); |
| if (op != ELS_LS_ACC || !adisc || |
| ntoh24(adisc->adisc_port_id) != rdata->ids.port_id || |
| get_unaligned_be64(&adisc->adisc_wwpn) != rdata->ids.port_name || |
| get_unaligned_be64(&adisc->adisc_wwnn) != rdata->ids.node_name) { |
| FC_RPORT_DBG(rdata, "ADISC error or mismatch\n"); |
| fc_rport_enter_plogi(rdata); |
| } else { |
| FC_RPORT_DBG(rdata, "ADISC OK\n"); |
| fc_rport_enter_ready(rdata); |
| } |
| out: |
| fc_frame_free(fp); |
| err: |
| mutex_unlock(&rdata->rp_mutex); |
| kref_put(&rdata->kref, rdata->local_port->tt.rport_destroy); |
| } |
| |
| /** |
| * fc_rport_enter_adisc() - Send Address Discover (ADISC) request |
| * @rdata: The remote port to send the ADISC request to |
| * |
| * Locking Note: The rport lock is expected to be held before calling |
| * this routine. |
| */ |
| static void fc_rport_enter_adisc(struct fc_rport_priv *rdata) |
| { |
| struct fc_lport *lport = rdata->local_port; |
| struct fc_frame *fp; |
| |
| FC_RPORT_DBG(rdata, "sending ADISC from %s state\n", |
| fc_rport_state(rdata)); |
| |
| fc_rport_state_enter(rdata, RPORT_ST_ADISC); |
| |
| fp = fc_frame_alloc(lport, sizeof(struct fc_els_adisc)); |
| if (!fp) { |
| fc_rport_error_retry(rdata, fp); |
| return; |
| } |
| if (!lport->tt.elsct_send(lport, rdata->ids.port_id, fp, ELS_ADISC, |
| fc_rport_adisc_resp, rdata, |
| 2 * lport->r_a_tov)) |
| fc_rport_error_retry(rdata, NULL); |
| else |
| kref_get(&rdata->kref); |
| } |
| |
| /** |
| * fc_rport_recv_adisc_req() - Handler for Address Discovery (ADISC) requests |
| * @rdata: The remote port that sent the ADISC request |
| * @sp: The sequence the ADISC request was on |
| * @in_fp: The ADISC request frame |
| * |
| * Locking Note: Called with the lport and rport locks held. |
| */ |
| static void fc_rport_recv_adisc_req(struct fc_rport_priv *rdata, |
| struct fc_seq *sp, struct fc_frame *in_fp) |
| { |
| struct fc_lport *lport = rdata->local_port; |
| struct fc_frame *fp; |
| struct fc_exch *ep = fc_seq_exch(sp); |
| struct fc_els_adisc *adisc; |
| struct fc_seq_els_data rjt_data; |
| u32 f_ctl; |
| |
| FC_RPORT_DBG(rdata, "Received ADISC request\n"); |
| |
| adisc = fc_frame_payload_get(in_fp, sizeof(*adisc)); |
| if (!adisc) { |
| rjt_data.fp = NULL; |
| rjt_data.reason = ELS_RJT_PROT; |
| rjt_data.explan = ELS_EXPL_INV_LEN; |
| lport->tt.seq_els_rsp_send(sp, ELS_LS_RJT, &rjt_data); |
| goto drop; |
| } |
| |
| fp = fc_frame_alloc(lport, sizeof(*adisc)); |
| if (!fp) |
| goto drop; |
| fc_adisc_fill(lport, fp); |
| adisc = fc_frame_payload_get(fp, sizeof(*adisc)); |
| adisc->adisc_cmd = ELS_LS_ACC; |
| sp = lport->tt.seq_start_next(sp); |
| f_ctl = FC_FC_EX_CTX | FC_FC_LAST_SEQ | FC_FC_END_SEQ | FC_FC_SEQ_INIT; |
| fc_fill_fc_hdr(fp, FC_RCTL_ELS_REP, ep->did, ep->sid, |
| FC_TYPE_ELS, f_ctl, 0); |
| lport->tt.seq_send(lport, sp, fp); |
| drop: |
| fc_frame_free(in_fp); |
| } |
| |
| /** |
| * fc_rport_recv_rls_req() - Handle received Read Link Status request |
| * @rdata: The remote port that sent the RLS request |
| * @sp: The sequence that the RLS was on |
| * @rx_fp: The PRLI request frame |
| * |
| * Locking Note: The rport lock is expected to be held before calling |
| * this function. |
| */ |
| static void fc_rport_recv_rls_req(struct fc_rport_priv *rdata, |
| struct fc_seq *sp, struct fc_frame *rx_fp) |
| |
| { |
| struct fc_lport *lport = rdata->local_port; |
| struct fc_frame *fp; |
| struct fc_exch *ep = fc_seq_exch(sp); |
| struct fc_els_rls *rls; |
| struct fc_els_rls_resp *rsp; |
| struct fc_els_lesb *lesb; |
| struct fc_seq_els_data rjt_data; |
| struct fc_host_statistics *hst; |
| u32 f_ctl; |
| |
| FC_RPORT_DBG(rdata, "Received RLS request while in state %s\n", |
| fc_rport_state(rdata)); |
| |
| rls = fc_frame_payload_get(rx_fp, sizeof(*rls)); |
| if (!rls) { |
| rjt_data.reason = ELS_RJT_PROT; |
| rjt_data.explan = ELS_EXPL_INV_LEN; |
| goto out_rjt; |
| } |
| |
| fp = fc_frame_alloc(lport, sizeof(*rsp)); |
| if (!fp) { |
| rjt_data.reason = ELS_RJT_UNAB; |
| rjt_data.explan = ELS_EXPL_INSUF_RES; |
| goto out_rjt; |
| } |
| |
| rsp = fc_frame_payload_get(fp, sizeof(*rsp)); |
| memset(rsp, 0, sizeof(*rsp)); |
| rsp->rls_cmd = ELS_LS_ACC; |
| lesb = &rsp->rls_lesb; |
| if (lport->tt.get_lesb) { |
| /* get LESB from LLD if it supports it */ |
| lport->tt.get_lesb(lport, lesb); |
| } else { |
| fc_get_host_stats(lport->host); |
| hst = &lport->host_stats; |
| lesb->lesb_link_fail = htonl(hst->link_failure_count); |
| lesb->lesb_sync_loss = htonl(hst->loss_of_sync_count); |
| lesb->lesb_sig_loss = htonl(hst->loss_of_signal_count); |
| lesb->lesb_prim_err = htonl(hst->prim_seq_protocol_err_count); |
| lesb->lesb_inv_word = htonl(hst->invalid_tx_word_count); |
| lesb->lesb_inv_crc = htonl(hst->invalid_crc_count); |
| } |
| |
| sp = lport->tt.seq_start_next(sp); |
| f_ctl = FC_FC_EX_CTX | FC_FC_LAST_SEQ | FC_FC_END_SEQ; |
| fc_fill_fc_hdr(fp, FC_RCTL_ELS_REP, ep->did, ep->sid, |
| FC_TYPE_ELS, f_ctl, 0); |
| lport->tt.seq_send(lport, sp, fp); |
| goto out; |
| |
| out_rjt: |
| rjt_data.fp = NULL; |
| lport->tt.seq_els_rsp_send(sp, ELS_LS_RJT, &rjt_data); |
| out: |
| fc_frame_free(rx_fp); |
| } |
| |
| /** |
| * fc_rport_recv_els_req() - Handler for validated ELS requests |
| * @lport: The local port that received the ELS request |
| * @sp: The sequence that the ELS request was on |
| * @fp: The ELS request frame |
| * |
| * Handle incoming ELS requests that require port login. |
| * The ELS opcode has already been validated by the caller. |
| * |
| * Locking Note: Called with the lport lock held. |
| */ |
| static void fc_rport_recv_els_req(struct fc_lport *lport, |
| struct fc_seq *sp, struct fc_frame *fp) |
| { |
| struct fc_rport_priv *rdata; |
| struct fc_frame_header *fh; |
| struct fc_seq_els_data els_data; |
| |
| els_data.fp = NULL; |
| els_data.reason = ELS_RJT_UNAB; |
| els_data.explan = ELS_EXPL_PLOGI_REQD; |
| |
| fh = fc_frame_header_get(fp); |
| |
| mutex_lock(&lport->disc.disc_mutex); |
| rdata = lport->tt.rport_lookup(lport, ntoh24(fh->fh_s_id)); |
| if (!rdata) { |
| mutex_unlock(&lport->disc.disc_mutex); |
| goto reject; |
| } |
| mutex_lock(&rdata->rp_mutex); |
| mutex_unlock(&lport->disc.disc_mutex); |
| |
| switch (rdata->rp_state) { |
| case RPORT_ST_PRLI: |
| case RPORT_ST_RTV: |
| case RPORT_ST_READY: |
| case RPORT_ST_ADISC: |
| break; |
| default: |
| mutex_unlock(&rdata->rp_mutex); |
| goto reject; |
| } |
| |
| switch (fc_frame_payload_op(fp)) { |
| case ELS_PRLI: |
| fc_rport_recv_prli_req(rdata, sp, fp); |
| break; |
| case ELS_PRLO: |
| fc_rport_recv_prlo_req(rdata, sp, fp); |
| break; |
| case ELS_ADISC: |
| fc_rport_recv_adisc_req(rdata, sp, fp); |
| break; |
| case ELS_RRQ: |
| els_data.fp = fp; |
| lport->tt.seq_els_rsp_send(sp, ELS_RRQ, &els_data); |
| break; |
| case ELS_REC: |
| els_data.fp = fp; |
| lport->tt.seq_els_rsp_send(sp, ELS_REC, &els_data); |
| break; |
| case ELS_RLS: |
| fc_rport_recv_rls_req(rdata, sp, fp); |
| break; |
| default: |
| fc_frame_free(fp); /* can't happen */ |
| break; |
| } |
| |
| mutex_unlock(&rdata->rp_mutex); |
| return; |
| |
| reject: |
| lport->tt.seq_els_rsp_send(sp, ELS_LS_RJT, &els_data); |
| fc_frame_free(fp); |
| } |
| |
| /** |
| * fc_rport_recv_req() - Handler for requests |
| * @sp: The sequence the request was on |
| * @fp: The request frame |
| * @lport: The local port that received the request |
| * |
| * Locking Note: Called with the lport lock held. |
| */ |
| void fc_rport_recv_req(struct fc_seq *sp, struct fc_frame *fp, |
| struct fc_lport *lport) |
| { |
| struct fc_seq_els_data els_data; |
| |
| /* |
| * Handle PLOGI and LOGO requests separately, since they |
| * don't require prior login. |
| * Check for unsupported opcodes first and reject them. |
| * For some ops, it would be incorrect to reject with "PLOGI required". |
| */ |
| switch (fc_frame_payload_op(fp)) { |
| case ELS_PLOGI: |
| fc_rport_recv_plogi_req(lport, sp, fp); |
| break; |
| case ELS_LOGO: |
| fc_rport_recv_logo_req(lport, sp, fp); |
| break; |
| case ELS_PRLI: |
| case ELS_PRLO: |
| case ELS_ADISC: |
| case ELS_RRQ: |
| case ELS_REC: |
| case ELS_RLS: |
| fc_rport_recv_els_req(lport, sp, fp); |
| break; |
| default: |
| fc_frame_free(fp); |
| els_data.fp = NULL; |
| els_data.reason = ELS_RJT_UNSUP; |
| els_data.explan = ELS_EXPL_NONE; |
| lport->tt.seq_els_rsp_send(sp, ELS_LS_RJT, &els_data); |
| break; |
| } |
| } |
| |
| /** |
| * fc_rport_recv_plogi_req() - Handler for Port Login (PLOGI) requests |
| * @lport: The local port that received the PLOGI request |
| * @sp: The sequence that the PLOGI request was on |
| * @rx_fp: The PLOGI request frame |
| * |
| * Locking Note: The rport lock is held before calling this function. |
| */ |
| static void fc_rport_recv_plogi_req(struct fc_lport *lport, |
| struct fc_seq *sp, struct fc_frame *rx_fp) |
| { |
| struct fc_disc *disc; |
| struct fc_rport_priv *rdata; |
| struct fc_frame *fp = rx_fp; |
| struct fc_exch *ep; |
| struct fc_frame_header *fh; |
| struct fc_els_flogi *pl; |
| struct fc_seq_els_data rjt_data; |
| u32 sid, f_ctl; |
| |
| rjt_data.fp = NULL; |
| fh = fc_frame_header_get(fp); |
| sid = ntoh24(fh->fh_s_id); |
| |
| FC_RPORT_ID_DBG(lport, sid, "Received PLOGI request\n"); |
| |
| pl = fc_frame_payload_get(fp, sizeof(*pl)); |
| if (!pl) { |
| FC_RPORT_ID_DBG(lport, sid, "Received PLOGI too short\n"); |
| rjt_data.reason = ELS_RJT_PROT; |
| rjt_data.explan = ELS_EXPL_INV_LEN; |
| goto reject; |
| } |
| |
| disc = &lport->disc; |
| mutex_lock(&disc->disc_mutex); |
| rdata = lport->tt.rport_create(lport, sid); |
| if (!rdata) { |
| mutex_unlock(&disc->disc_mutex); |
| rjt_data.reason = ELS_RJT_UNAB; |
| rjt_data.explan = ELS_EXPL_INSUF_RES; |
| goto reject; |
| } |
| |
| mutex_lock(&rdata->rp_mutex); |
| mutex_unlock(&disc->disc_mutex); |
| |
| rdata->ids.port_name = get_unaligned_be64(&pl->fl_wwpn); |
| rdata->ids.node_name = get_unaligned_be64(&pl->fl_wwnn); |
| |
| /* |
| * If the rport was just created, possibly due to the incoming PLOGI, |
| * set the state appropriately and accept the PLOGI. |
| * |
| * If we had also sent a PLOGI, and if the received PLOGI is from a |
| * higher WWPN, we accept it, otherwise an LS_RJT is sent with reason |
| * "command already in progress". |
| * |
| * XXX TBD: If the session was ready before, the PLOGI should result in |
| * all outstanding exchanges being reset. |
| */ |
| switch (rdata->rp_state) { |
| case RPORT_ST_INIT: |
| FC_RPORT_DBG(rdata, "Received PLOGI in INIT state\n"); |
| break; |
| case RPORT_ST_PLOGI: |
| FC_RPORT_DBG(rdata, "Received PLOGI in PLOGI state\n"); |
| if (rdata->ids.port_name < lport->wwpn) { |
| mutex_unlock(&rdata->rp_mutex); |
| rjt_data.reason = ELS_RJT_INPROG; |
| rjt_data.explan = ELS_EXPL_NONE; |
| goto reject; |
| } |
| break; |
| case RPORT_ST_PRLI: |
| case RPORT_ST_RTV: |
| case RPORT_ST_READY: |
| case RPORT_ST_ADISC: |
| FC_RPORT_DBG(rdata, "Received PLOGI in logged-in state %d " |
| "- ignored for now\n", rdata->rp_state); |
| /* XXX TBD - should reset */ |
| break; |
| case RPORT_ST_DELETE: |
| case RPORT_ST_LOGO: |
| case RPORT_ST_RESTART: |
| FC_RPORT_DBG(rdata, "Received PLOGI in state %s - send busy\n", |
| fc_rport_state(rdata)); |
| mutex_unlock(&rdata->rp_mutex); |
| rjt_data.reason = ELS_RJT_BUSY; |
| rjt_data.explan = ELS_EXPL_NONE; |
| goto reject; |
| } |
| |
| /* |
| * Get session payload size from incoming PLOGI. |
| */ |
| rdata->maxframe_size = fc_plogi_get_maxframe(pl, lport->mfs); |
| fc_frame_free(rx_fp); |
| |
| /* |
| * Send LS_ACC. If this fails, the originator should retry. |
| */ |
| sp = lport->tt.seq_start_next(sp); |
| if (!sp) |
| goto out; |
| fp = fc_frame_alloc(lport, sizeof(*pl)); |
| if (!fp) |
| goto out; |
| |
| fc_plogi_fill(lport, fp, ELS_LS_ACC); |
| f_ctl = FC_FC_EX_CTX | FC_FC_LAST_SEQ | FC_FC_END_SEQ | FC_FC_SEQ_INIT; |
| ep = fc_seq_exch(sp); |
| fc_fill_fc_hdr(fp, FC_RCTL_ELS_REP, ep->did, ep->sid, |
| FC_TYPE_ELS, f_ctl, 0); |
| lport->tt.seq_send(lport, sp, fp); |
| fc_rport_enter_prli(rdata); |
| out: |
| mutex_unlock(&rdata->rp_mutex); |
| return; |
| |
| reject: |
| lport->tt.seq_els_rsp_send(sp, ELS_LS_RJT, &rjt_data); |
| fc_frame_free(fp); |
| } |
| |
| /** |
| * fc_rport_recv_prli_req() - Handler for process login (PRLI) requests |
| * @rdata: The remote port that sent the PRLI request |
| * @sp: The sequence that the PRLI was on |
| * @rx_fp: The PRLI request frame |
| * |
| * Locking Note: The rport lock is exected to be held before calling |
| * this function. |
| */ |
| static void fc_rport_recv_prli_req(struct fc_rport_priv *rdata, |
| struct fc_seq *sp, struct fc_frame *rx_fp) |
| { |
| struct fc_lport *lport = rdata->local_port; |
| struct fc_exch *ep; |
| struct fc_frame *fp; |
| struct fc_frame_header *fh; |
| struct { |
| struct fc_els_prli prli; |
| struct fc_els_spp spp; |
| } *pp; |
| struct fc_els_spp *rspp; /* request service param page */ |
| struct fc_els_spp *spp; /* response spp */ |
| unsigned int len; |
| unsigned int plen; |
| enum fc_els_spp_resp resp; |
| struct fc_seq_els_data rjt_data; |
| u32 f_ctl; |
| u32 fcp_parm; |
| u32 roles = FC_RPORT_ROLE_UNKNOWN; |
| |
| rjt_data.fp = NULL; |
| fh = fc_frame_header_get(rx_fp); |
| |
| FC_RPORT_DBG(rdata, "Received PRLI request while in state %s\n", |
| fc_rport_state(rdata)); |
| |
| len = fr_len(rx_fp) - sizeof(*fh); |
| pp = fc_frame_payload_get(rx_fp, sizeof(*pp)); |
| if (!pp) |
| goto reject_len; |
| plen = ntohs(pp->prli.prli_len); |
| if ((plen % 4) != 0 || plen > len || plen < 16) |
| goto reject_len; |
| if (plen < len) |
| len = plen; |
| plen = pp->prli.prli_spp_len; |
| if ((plen % 4) != 0 || plen < sizeof(*spp) || |
| plen > len || len < sizeof(*pp) || plen < 12) |
| goto reject_len; |
| rspp = &pp->spp; |
| |
| fp = fc_frame_alloc(lport, len); |
| if (!fp) { |
| rjt_data.reason = ELS_RJT_UNAB; |
| rjt_data.explan = ELS_EXPL_INSUF_RES; |
| goto reject; |
| } |
| sp = lport->tt.seq_start_next(sp); |
| WARN_ON(!sp); |
| pp = fc_frame_payload_get(fp, len); |
| WARN_ON(!pp); |
| memset(pp, 0, len); |
| pp->prli.prli_cmd = ELS_LS_ACC; |
| pp->prli.prli_spp_len = plen; |
| pp->prli.prli_len = htons(len); |
| len -= sizeof(struct fc_els_prli); |
| |
| /* reinitialize remote port roles */ |
| rdata->ids.roles = FC_RPORT_ROLE_UNKNOWN; |
| |
| /* |
| * Go through all the service parameter pages and build |
| * response. If plen indicates longer SPP than standard, |
| * use that. The entire response has been pre-cleared above. |
| */ |
| spp = &pp->spp; |
| while (len >= plen) { |
| spp->spp_type = rspp->spp_type; |
| spp->spp_type_ext = rspp->spp_type_ext; |
| spp->spp_flags = rspp->spp_flags & FC_SPP_EST_IMG_PAIR; |
| resp = FC_SPP_RESP_ACK; |
| |
| switch (rspp->spp_type) { |
| case 0: /* common to all FC-4 types */ |
| break; |
| case FC_TYPE_FCP: |
| fcp_parm = ntohl(rspp->spp_params); |
| if (fcp_parm & FCP_SPPF_RETRY) |
| rdata->flags |= FC_RP_FLAGS_RETRY; |
| rdata->supported_classes = FC_COS_CLASS3; |
| if (fcp_parm & FCP_SPPF_INIT_FCN) |
| roles |= FC_RPORT_ROLE_FCP_INITIATOR; |
| if (fcp_parm & FCP_SPPF_TARG_FCN) |
| roles |= FC_RPORT_ROLE_FCP_TARGET; |
| rdata->ids.roles = roles; |
| |
| spp->spp_params = htonl(lport->service_params); |
| break; |
| default: |
| resp = FC_SPP_RESP_INVL; |
| break; |
| } |
| spp->spp_flags |= resp; |
| len -= plen; |
| rspp = (struct fc_els_spp *)((char *)rspp + plen); |
| spp = (struct fc_els_spp *)((char *)spp + plen); |
| } |
| |
| /* |
| * Send LS_ACC. If this fails, the originator should retry. |
| */ |
| f_ctl = FC_FC_EX_CTX | FC_FC_LAST_SEQ; |
| f_ctl |= FC_FC_END_SEQ | FC_FC_SEQ_INIT; |
| ep = fc_seq_exch(sp); |
| fc_fill_fc_hdr(fp, FC_RCTL_ELS_REP, ep->did, ep->sid, |
| FC_TYPE_ELS, f_ctl, 0); |
| lport->tt.seq_send(lport, sp, fp); |
| |
| switch (rdata->rp_state) { |
| case RPORT_ST_PRLI: |
| fc_rport_enter_ready(rdata); |
| break; |
| default: |
| break; |
| } |
| goto drop; |
| |
| reject_len: |
| rjt_data.reason = ELS_RJT_PROT; |
| rjt_data.explan = ELS_EXPL_INV_LEN; |
| reject: |
| lport->tt.seq_els_rsp_send(sp, ELS_LS_RJT, &rjt_data); |
| drop: |
| fc_frame_free(rx_fp); |
| } |
| |
| /** |
| * fc_rport_recv_prlo_req() - Handler for process logout (PRLO) requests |
| * @rdata: The remote port that sent the PRLO request |
| * @sp: The sequence that the PRLO was on |
| * @fp: The PRLO request frame |
| * |
| * Locking Note: The rport lock is exected to be held before calling |
| * this function. |
| */ |
| static void fc_rport_recv_prlo_req(struct fc_rport_priv *rdata, |
| struct fc_seq *sp, |
| struct fc_frame *fp) |
| { |
| struct fc_lport *lport = rdata->local_port; |
| |
| struct fc_frame_header *fh; |
| struct fc_seq_els_data rjt_data; |
| |
| fh = fc_frame_header_get(fp); |
| |
| FC_RPORT_DBG(rdata, "Received PRLO request while in state %s\n", |
| fc_rport_state(rdata)); |
| |
| rjt_data.fp = NULL; |
| rjt_data.reason = ELS_RJT_UNAB; |
| rjt_data.explan = ELS_EXPL_NONE; |
| lport->tt.seq_els_rsp_send(sp, ELS_LS_RJT, &rjt_data); |
| fc_frame_free(fp); |
| } |
| |
| /** |
| * fc_rport_recv_logo_req() - Handler for logout (LOGO) requests |
| * @lport: The local port that received the LOGO request |
| * @sp: The sequence that the LOGO request was on |
| * @fp: The LOGO request frame |
| * |
| * Locking Note: The rport lock is exected to be held before calling |
| * this function. |
| */ |
| static void fc_rport_recv_logo_req(struct fc_lport *lport, |
| struct fc_seq *sp, |
| struct fc_frame *fp) |
| { |
| struct fc_frame_header *fh; |
| struct fc_rport_priv *rdata; |
| u32 sid; |
| |
| lport->tt.seq_els_rsp_send(sp, ELS_LS_ACC, NULL); |
| |
| fh = fc_frame_header_get(fp); |
| sid = ntoh24(fh->fh_s_id); |
| |
| mutex_lock(&lport->disc.disc_mutex); |
| rdata = lport->tt.rport_lookup(lport, sid); |
| if (rdata) { |
| mutex_lock(&rdata->rp_mutex); |
| FC_RPORT_DBG(rdata, "Received LOGO request while in state %s\n", |
| fc_rport_state(rdata)); |
| |
| fc_rport_enter_delete(rdata, RPORT_EV_LOGO); |
| |
| /* |
| * If the remote port was created due to discovery, set state |
| * to log back in. It may have seen a stale RSCN about us. |
| */ |
| if (rdata->disc_id) |
| fc_rport_state_enter(rdata, RPORT_ST_RESTART); |
| mutex_unlock(&rdata->rp_mutex); |
| } else |
| FC_RPORT_ID_DBG(lport, sid, |
| "Received LOGO from non-logged-in port\n"); |
| mutex_unlock(&lport->disc.disc_mutex); |
| fc_frame_free(fp); |
| } |
| |
| /** |
| * fc_rport_flush_queue() - Flush the rport_event_queue |
| */ |
| static void fc_rport_flush_queue(void) |
| { |
| flush_workqueue(rport_event_queue); |
| } |
| |
| /** |
| * fc_rport_init() - Initialize the remote port layer for a local port |
| * @lport: The local port to initialize the remote port layer for |
| */ |
| int fc_rport_init(struct fc_lport *lport) |
| { |
| if (!lport->tt.rport_lookup) |
| lport->tt.rport_lookup = fc_rport_lookup; |
| |
| if (!lport->tt.rport_create) |
| lport->tt.rport_create = fc_rport_create; |
| |
| if (!lport->tt.rport_login) |
| lport->tt.rport_login = fc_rport_login; |
| |
| if (!lport->tt.rport_logoff) |
| lport->tt.rport_logoff = fc_rport_logoff; |
| |
| if (!lport->tt.rport_recv_req) |
| lport->tt.rport_recv_req = fc_rport_recv_req; |
| |
| if (!lport->tt.rport_flush_queue) |
| lport->tt.rport_flush_queue = fc_rport_flush_queue; |
| |
| if (!lport->tt.rport_destroy) |
| lport->tt.rport_destroy = fc_rport_destroy; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(fc_rport_init); |
| |
| /** |
| * fc_setup_rport() - Initialize the rport_event_queue |
| */ |
| int fc_setup_rport() |
| { |
| rport_event_queue = create_singlethread_workqueue("fc_rport_eq"); |
| if (!rport_event_queue) |
| return -ENOMEM; |
| return 0; |
| } |
| |
| /** |
| * fc_destroy_rport() - Destroy the rport_event_queue |
| */ |
| void fc_destroy_rport() |
| { |
| destroy_workqueue(rport_event_queue); |
| } |
| |
| /** |
| * fc_rport_terminate_io() - Stop all outstanding I/O on a remote port |
| * @rport: The remote port whose I/O should be terminated |
| */ |
| void fc_rport_terminate_io(struct fc_rport *rport) |
| { |
| struct fc_rport_libfc_priv *rpriv = rport->dd_data; |
| struct fc_lport *lport = rpriv->local_port; |
| |
| lport->tt.exch_mgr_reset(lport, 0, rport->port_id); |
| lport->tt.exch_mgr_reset(lport, rport->port_id, 0); |
| } |
| EXPORT_SYMBOL(fc_rport_terminate_io); |