| /* |
| NetWinder Floating Point Emulator |
| (c) Rebel.COM, 1998,1999 |
| (c) Philip Blundell, 1999, 2001 |
| |
| Direct questions, comments to Scott Bambrough <scottb@netwinder.org> |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include "fpa11.h" |
| #include "fpopcode.h" |
| #include "fpa11.inl" |
| #include "fpmodule.h" |
| #include "fpmodule.inl" |
| #include "softfloat.h" |
| |
| unsigned int PerformFLT(const unsigned int opcode); |
| unsigned int PerformFIX(const unsigned int opcode); |
| |
| static unsigned int PerformComparison(const unsigned int opcode); |
| |
| unsigned int EmulateCPRT(const unsigned int opcode) |
| { |
| |
| if (opcode & 0x800000) { |
| /* This is some variant of a comparison (PerformComparison |
| will sort out which one). Since most of the other CPRT |
| instructions are oddball cases of some sort or other it |
| makes sense to pull this out into a fast path. */ |
| return PerformComparison(opcode); |
| } |
| |
| /* Hint to GCC that we'd like a jump table rather than a load of CMPs */ |
| switch ((opcode & 0x700000) >> 20) { |
| case FLT_CODE >> 20: |
| return PerformFLT(opcode); |
| break; |
| case FIX_CODE >> 20: |
| return PerformFIX(opcode); |
| break; |
| |
| case WFS_CODE >> 20: |
| writeFPSR(readRegister(getRd(opcode))); |
| break; |
| case RFS_CODE >> 20: |
| writeRegister(getRd(opcode), readFPSR()); |
| break; |
| |
| default: |
| return 0; |
| } |
| |
| return 1; |
| } |
| |
| unsigned int PerformFLT(const unsigned int opcode) |
| { |
| FPA11 *fpa11 = GET_FPA11(); |
| struct roundingData roundData; |
| |
| roundData.mode = SetRoundingMode(opcode); |
| roundData.precision = SetRoundingPrecision(opcode); |
| roundData.exception = 0; |
| |
| switch (opcode & MASK_ROUNDING_PRECISION) { |
| case ROUND_SINGLE: |
| { |
| fpa11->fType[getFn(opcode)] = typeSingle; |
| fpa11->fpreg[getFn(opcode)].fSingle = int32_to_float32(&roundData, readRegister(getRd(opcode))); |
| } |
| break; |
| |
| case ROUND_DOUBLE: |
| { |
| fpa11->fType[getFn(opcode)] = typeDouble; |
| fpa11->fpreg[getFn(opcode)].fDouble = int32_to_float64(readRegister(getRd(opcode))); |
| } |
| break; |
| |
| #ifdef CONFIG_FPE_NWFPE_XP |
| case ROUND_EXTENDED: |
| { |
| fpa11->fType[getFn(opcode)] = typeExtended; |
| fpa11->fpreg[getFn(opcode)].fExtended = int32_to_floatx80(readRegister(getRd(opcode))); |
| } |
| break; |
| #endif |
| |
| default: |
| return 0; |
| } |
| |
| if (roundData.exception) |
| float_raise(roundData.exception); |
| |
| return 1; |
| } |
| |
| unsigned int PerformFIX(const unsigned int opcode) |
| { |
| FPA11 *fpa11 = GET_FPA11(); |
| unsigned int Fn = getFm(opcode); |
| struct roundingData roundData; |
| |
| roundData.mode = SetRoundingMode(opcode); |
| roundData.precision = SetRoundingPrecision(opcode); |
| roundData.exception = 0; |
| |
| switch (fpa11->fType[Fn]) { |
| case typeSingle: |
| { |
| writeRegister(getRd(opcode), float32_to_int32(&roundData, fpa11->fpreg[Fn].fSingle)); |
| } |
| break; |
| |
| case typeDouble: |
| { |
| writeRegister(getRd(opcode), float64_to_int32(&roundData, fpa11->fpreg[Fn].fDouble)); |
| } |
| break; |
| |
| #ifdef CONFIG_FPE_NWFPE_XP |
| case typeExtended: |
| { |
| writeRegister(getRd(opcode), floatx80_to_int32(&roundData, fpa11->fpreg[Fn].fExtended)); |
| } |
| break; |
| #endif |
| |
| default: |
| return 0; |
| } |
| |
| if (roundData.exception) |
| float_raise(roundData.exception); |
| |
| return 1; |
| } |
| |
| /* This instruction sets the flags N, Z, C, V in the FPSR. */ |
| static unsigned int PerformComparison(const unsigned int opcode) |
| { |
| FPA11 *fpa11 = GET_FPA11(); |
| unsigned int Fn = getFn(opcode), Fm = getFm(opcode); |
| int e_flag = opcode & 0x400000; /* 1 if CxFE */ |
| int n_flag = opcode & 0x200000; /* 1 if CNxx */ |
| unsigned int flags = 0; |
| |
| #ifdef CONFIG_FPE_NWFPE_XP |
| floatx80 rFn, rFm; |
| |
| /* Check for unordered condition and convert all operands to 80-bit |
| format. |
| ?? Might be some mileage in avoiding this conversion if possible. |
| Eg, if both operands are 32-bit, detect this and do a 32-bit |
| comparison (cheaper than an 80-bit one). */ |
| switch (fpa11->fType[Fn]) { |
| case typeSingle: |
| //printk("single.\n"); |
| if (float32_is_nan(fpa11->fpreg[Fn].fSingle)) |
| goto unordered; |
| rFn = float32_to_floatx80(fpa11->fpreg[Fn].fSingle); |
| break; |
| |
| case typeDouble: |
| //printk("double.\n"); |
| if (float64_is_nan(fpa11->fpreg[Fn].fDouble)) |
| goto unordered; |
| rFn = float64_to_floatx80(fpa11->fpreg[Fn].fDouble); |
| break; |
| |
| case typeExtended: |
| //printk("extended.\n"); |
| if (floatx80_is_nan(fpa11->fpreg[Fn].fExtended)) |
| goto unordered; |
| rFn = fpa11->fpreg[Fn].fExtended; |
| break; |
| |
| default: |
| return 0; |
| } |
| |
| if (CONSTANT_FM(opcode)) { |
| //printk("Fm is a constant: #%d.\n",Fm); |
| rFm = getExtendedConstant(Fm); |
| if (floatx80_is_nan(rFm)) |
| goto unordered; |
| } else { |
| //printk("Fm = r%d which contains a ",Fm); |
| switch (fpa11->fType[Fm]) { |
| case typeSingle: |
| //printk("single.\n"); |
| if (float32_is_nan(fpa11->fpreg[Fm].fSingle)) |
| goto unordered; |
| rFm = float32_to_floatx80(fpa11->fpreg[Fm].fSingle); |
| break; |
| |
| case typeDouble: |
| //printk("double.\n"); |
| if (float64_is_nan(fpa11->fpreg[Fm].fDouble)) |
| goto unordered; |
| rFm = float64_to_floatx80(fpa11->fpreg[Fm].fDouble); |
| break; |
| |
| case typeExtended: |
| //printk("extended.\n"); |
| if (floatx80_is_nan(fpa11->fpreg[Fm].fExtended)) |
| goto unordered; |
| rFm = fpa11->fpreg[Fm].fExtended; |
| break; |
| |
| default: |
| return 0; |
| } |
| } |
| |
| if (n_flag) |
| rFm.high ^= 0x8000; |
| |
| /* test for less than condition */ |
| if (floatx80_lt(rFn, rFm)) |
| flags |= CC_NEGATIVE; |
| |
| /* test for equal condition */ |
| if (floatx80_eq(rFn, rFm)) |
| flags |= CC_ZERO; |
| |
| /* test for greater than or equal condition */ |
| if (floatx80_lt(rFm, rFn)) |
| flags |= CC_CARRY; |
| |
| #else |
| if (CONSTANT_FM(opcode)) { |
| /* Fm is a constant. Do the comparison in whatever precision |
| Fn happens to be stored in. */ |
| if (fpa11->fType[Fn] == typeSingle) { |
| float32 rFm = getSingleConstant(Fm); |
| float32 rFn = fpa11->fpreg[Fn].fSingle; |
| |
| if (float32_is_nan(rFn)) |
| goto unordered; |
| |
| if (n_flag) |
| rFm ^= 0x80000000; |
| |
| /* test for less than condition */ |
| if (float32_lt_nocheck(rFn, rFm)) |
| flags |= CC_NEGATIVE; |
| |
| /* test for equal condition */ |
| if (float32_eq_nocheck(rFn, rFm)) |
| flags |= CC_ZERO; |
| |
| /* test for greater than or equal condition */ |
| if (float32_lt_nocheck(rFm, rFn)) |
| flags |= CC_CARRY; |
| } else { |
| float64 rFm = getDoubleConstant(Fm); |
| float64 rFn = fpa11->fpreg[Fn].fDouble; |
| |
| if (float64_is_nan(rFn)) |
| goto unordered; |
| |
| if (n_flag) |
| rFm ^= 0x8000000000000000ULL; |
| |
| /* test for less than condition */ |
| if (float64_lt_nocheck(rFn, rFm)) |
| flags |= CC_NEGATIVE; |
| |
| /* test for equal condition */ |
| if (float64_eq_nocheck(rFn, rFm)) |
| flags |= CC_ZERO; |
| |
| /* test for greater than or equal condition */ |
| if (float64_lt_nocheck(rFm, rFn)) |
| flags |= CC_CARRY; |
| } |
| } else { |
| /* Both operands are in registers. */ |
| if (fpa11->fType[Fn] == typeSingle |
| && fpa11->fType[Fm] == typeSingle) { |
| float32 rFm = fpa11->fpreg[Fm].fSingle; |
| float32 rFn = fpa11->fpreg[Fn].fSingle; |
| |
| if (float32_is_nan(rFn) |
| || float32_is_nan(rFm)) |
| goto unordered; |
| |
| if (n_flag) |
| rFm ^= 0x80000000; |
| |
| /* test for less than condition */ |
| if (float32_lt_nocheck(rFn, rFm)) |
| flags |= CC_NEGATIVE; |
| |
| /* test for equal condition */ |
| if (float32_eq_nocheck(rFn, rFm)) |
| flags |= CC_ZERO; |
| |
| /* test for greater than or equal condition */ |
| if (float32_lt_nocheck(rFm, rFn)) |
| flags |= CC_CARRY; |
| } else { |
| /* Promote 32-bit operand to 64 bits. */ |
| float64 rFm, rFn; |
| |
| rFm = (fpa11->fType[Fm] == typeSingle) ? |
| float32_to_float64(fpa11->fpreg[Fm].fSingle) |
| : fpa11->fpreg[Fm].fDouble; |
| |
| rFn = (fpa11->fType[Fn] == typeSingle) ? |
| float32_to_float64(fpa11->fpreg[Fn].fSingle) |
| : fpa11->fpreg[Fn].fDouble; |
| |
| if (float64_is_nan(rFn) |
| || float64_is_nan(rFm)) |
| goto unordered; |
| |
| if (n_flag) |
| rFm ^= 0x8000000000000000ULL; |
| |
| /* test for less than condition */ |
| if (float64_lt_nocheck(rFn, rFm)) |
| flags |= CC_NEGATIVE; |
| |
| /* test for equal condition */ |
| if (float64_eq_nocheck(rFn, rFm)) |
| flags |= CC_ZERO; |
| |
| /* test for greater than or equal condition */ |
| if (float64_lt_nocheck(rFm, rFn)) |
| flags |= CC_CARRY; |
| } |
| } |
| |
| #endif |
| |
| writeConditionCodes(flags); |
| |
| return 1; |
| |
| unordered: |
| /* ?? The FPA data sheet is pretty vague about this, in particular |
| about whether the non-E comparisons can ever raise exceptions. |
| This implementation is based on a combination of what it says in |
| the data sheet, observation of how the Acorn emulator actually |
| behaves (and how programs expect it to) and guesswork. */ |
| flags |= CC_OVERFLOW; |
| flags &= ~(CC_ZERO | CC_NEGATIVE); |
| |
| if (BIT_AC & readFPSR()) |
| flags |= CC_CARRY; |
| |
| if (e_flag) |
| float_raise(float_flag_invalid); |
| |
| writeConditionCodes(flags); |
| return 1; |
| } |