| /*++ |
| Copyright-c Realtek Semiconductor Corp. All rights reserved. |
| |
| Module Name: |
| r8192U_dm.c |
| |
| Abstract: |
| HW dynamic mechanism. |
| |
| Major Change History: |
| When Who What |
| ---------- --------------- ------------------------------- |
| 2008-05-14 amy create version 0 porting from windows code. |
| |
| --*/ |
| #include "r8192U.h" |
| #include "r8192U_dm.h" |
| #include "r8192U_hw.h" |
| #include "r819xU_phy.h" |
| #include "r819xU_phyreg.h" |
| #include "r8190_rtl8256.h" |
| #include "r819xU_cmdpkt.h" |
| /*---------------------------Define Local Constant---------------------------*/ |
| // |
| // Indicate different AP vendor for IOT issue. |
| // |
| static u32 edca_setting_DL[HT_IOT_PEER_MAX] = |
| { 0x5e4322, 0x5e4322, 0x5e4322, 0x604322, 0xa44f, 0x5ea44f}; |
| static u32 edca_setting_UL[HT_IOT_PEER_MAX] = |
| { 0x5e4322, 0xa44f, 0x5e4322, 0x604322, 0x5ea44f, 0x5ea44f}; |
| |
| |
| #define RTK_UL_EDCA 0xa44f |
| #define RTK_DL_EDCA 0x5e4322 |
| /*---------------------------Define Local Constant---------------------------*/ |
| |
| |
| /*------------------------Define global variable-----------------------------*/ |
| // Debug variable ? |
| dig_t dm_digtable; |
| // Store current shoftware write register content for MAC PHY. |
| u8 dm_shadow[16][256] = {{0}}; |
| // For Dynamic Rx Path Selection by Signal Strength |
| DRxPathSel DM_RxPathSelTable; |
| /*------------------------Define global variable-----------------------------*/ |
| |
| |
| /*------------------------Define local variable------------------------------*/ |
| /*------------------------Define local variable------------------------------*/ |
| |
| |
| /*--------------------Define export function prototype-----------------------*/ |
| extern void init_hal_dm(struct net_device *dev); |
| extern void deinit_hal_dm(struct net_device *dev); |
| |
| extern void hal_dm_watchdog(struct net_device *dev); |
| |
| |
| extern void init_rate_adaptive(struct net_device *dev); |
| extern void dm_txpower_trackingcallback(struct work_struct *work); |
| |
| extern void dm_cck_txpower_adjust(struct net_device *dev,bool binch14); |
| extern void dm_restore_dynamic_mechanism_state(struct net_device *dev); |
| extern void dm_backup_dynamic_mechanism_state(struct net_device *dev); |
| extern void dm_change_dynamic_initgain_thresh(struct net_device *dev, |
| u32 dm_type, |
| u32 dm_value); |
| extern void DM_ChangeFsyncSetting(struct net_device *dev, |
| s32 DM_Type, |
| s32 DM_Value); |
| extern void dm_force_tx_fw_info(struct net_device *dev, |
| u32 force_type, |
| u32 force_value); |
| extern void dm_init_edca_turbo(struct net_device *dev); |
| extern void dm_rf_operation_test_callback(unsigned long data); |
| extern void dm_rf_pathcheck_workitemcallback(struct work_struct *work); |
| extern void dm_fsync_timer_callback(unsigned long data); |
| extern void dm_check_fsync(struct net_device *dev); |
| extern void dm_shadow_init(struct net_device *dev); |
| |
| |
| /*--------------------Define export function prototype-----------------------*/ |
| |
| |
| /*---------------------Define local function prototype-----------------------*/ |
| // DM --> Rate Adaptive |
| static void dm_check_rate_adaptive(struct net_device *dev); |
| |
| // DM --> Bandwidth switch |
| static void dm_init_bandwidth_autoswitch(struct net_device *dev); |
| static void dm_bandwidth_autoswitch( struct net_device *dev); |
| |
| // DM --> TX power control |
| //static void dm_initialize_txpower_tracking(struct net_device *dev); |
| |
| static void dm_check_txpower_tracking(struct net_device *dev); |
| |
| |
| |
| //static void dm_txpower_reset_recovery(struct net_device *dev); |
| |
| |
| // DM --> BB init gain restore |
| #ifndef RTL8192U |
| static void dm_bb_initialgain_restore(struct net_device *dev); |
| |
| |
| // DM --> BB init gain backup |
| static void dm_bb_initialgain_backup(struct net_device *dev); |
| #endif |
| // DM --> Dynamic Init Gain by RSSI |
| static void dm_dig_init(struct net_device *dev); |
| static void dm_ctrl_initgain_byrssi(struct net_device *dev); |
| static void dm_ctrl_initgain_byrssi_highpwr(struct net_device *dev); |
| static void dm_ctrl_initgain_byrssi_by_driverrssi( struct net_device *dev); |
| static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(struct net_device *dev); |
| static void dm_initial_gain(struct net_device *dev); |
| static void dm_pd_th(struct net_device *dev); |
| static void dm_cs_ratio(struct net_device *dev); |
| |
| static void dm_init_ctstoself(struct net_device *dev); |
| // DM --> EDCA turboe mode control |
| static void dm_check_edca_turbo(struct net_device *dev); |
| |
| // DM --> HW RF control |
| static void dm_check_rfctrl_gpio(struct net_device *dev); |
| |
| #ifndef RTL8190P |
| //static void dm_gpio_change_rf(struct net_device *dev); |
| #endif |
| // DM --> Check PBC |
| static void dm_check_pbc_gpio(struct net_device *dev); |
| |
| |
| // DM --> Check current RX RF path state |
| static void dm_check_rx_path_selection(struct net_device *dev); |
| static void dm_init_rxpath_selection(struct net_device *dev); |
| static void dm_rxpath_sel_byrssi(struct net_device *dev); |
| |
| |
| // DM --> Fsync for broadcom ap |
| static void dm_init_fsync(struct net_device *dev); |
| static void dm_deInit_fsync(struct net_device *dev); |
| |
| //Added by vivi, 20080522 |
| static void dm_check_txrateandretrycount(struct net_device *dev); |
| |
| /*---------------------Define local function prototype-----------------------*/ |
| |
| /*---------------------Define of Tx Power Control For Near/Far Range --------*/ //Add by Jacken 2008/02/18 |
| static void dm_init_dynamic_txpower(struct net_device *dev); |
| static void dm_dynamic_txpower(struct net_device *dev); |
| |
| |
| // DM --> For rate adaptive and DIG, we must send RSSI to firmware |
| static void dm_send_rssi_tofw(struct net_device *dev); |
| static void dm_ctstoself(struct net_device *dev); |
| /*---------------------------Define function prototype------------------------*/ |
| //================================================================================ |
| // HW Dynamic mechanism interface. |
| //================================================================================ |
| |
| // |
| // Description: |
| // Prepare SW resource for HW dynamic mechanism. |
| // |
| // Assumption: |
| // This function is only invoked at driver intialization once. |
| // |
| // |
| extern void |
| init_hal_dm(struct net_device *dev) |
| { |
| struct r8192_priv *priv = ieee80211_priv(dev); |
| |
| // Undecorated Smoothed Signal Strength, it can utilized to dynamic mechanism. |
| priv->undecorated_smoothed_pwdb = -1; |
| |
| //Initial TX Power Control for near/far range , add by amy 2008/05/15, porting from windows code. |
| dm_init_dynamic_txpower(dev); |
| init_rate_adaptive(dev); |
| //dm_initialize_txpower_tracking(dev); |
| dm_dig_init(dev); |
| dm_init_edca_turbo(dev); |
| dm_init_bandwidth_autoswitch(dev); |
| dm_init_fsync(dev); |
| dm_init_rxpath_selection(dev); |
| dm_init_ctstoself(dev); |
| |
| } // InitHalDm |
| |
| extern void deinit_hal_dm(struct net_device *dev) |
| { |
| |
| dm_deInit_fsync(dev); |
| |
| } |
| |
| |
| #ifdef USB_RX_AGGREGATION_SUPPORT |
| void dm_CheckRxAggregation(struct net_device *dev) { |
| struct r8192_priv *priv = ieee80211_priv((struct net_device *)dev); |
| PRT_HIGH_THROUGHPUT pHTInfo = priv->ieee80211->pHTInfo; |
| static unsigned long lastTxOkCnt = 0; |
| static unsigned long lastRxOkCnt = 0; |
| unsigned long curTxOkCnt = 0; |
| unsigned long curRxOkCnt = 0; |
| |
| /* |
| if (pHalData->bForcedUsbRxAggr) { |
| if (pHalData->ForcedUsbRxAggrInfo == 0) { |
| if (pHalData->bCurrentRxAggrEnable) { |
| Adapter->HalFunc.HalUsbRxAggrHandler(Adapter, FALSE); |
| } |
| } else { |
| if (!pHalData->bCurrentRxAggrEnable || (pHalData->ForcedUsbRxAggrInfo != pHalData->LastUsbRxAggrInfoSetting)) { |
| Adapter->HalFunc.HalUsbRxAggrHandler(Adapter, TRUE); |
| } |
| } |
| return; |
| } |
| |
| */ |
| curTxOkCnt = priv->stats.txbytesunicast - lastTxOkCnt; |
| curRxOkCnt = priv->stats.rxbytesunicast - lastRxOkCnt; |
| |
| if((curTxOkCnt + curRxOkCnt) < 15000000) { |
| return; |
| } |
| |
| if(curTxOkCnt > 4*curRxOkCnt) { |
| if (priv->bCurrentRxAggrEnable) { |
| write_nic_dword(dev, 0x1a8, 0); |
| priv->bCurrentRxAggrEnable = false; |
| } |
| }else{ |
| if (!priv->bCurrentRxAggrEnable && !pHTInfo->bCurrentRT2RTAggregation) { |
| u32 ulValue; |
| ulValue = (pHTInfo->UsbRxFwAggrEn<<24) | (pHTInfo->UsbRxFwAggrPageNum<<16) | |
| (pHTInfo->UsbRxFwAggrPacketNum<<8) | (pHTInfo->UsbRxFwAggrTimeout); |
| /* |
| * If usb rx firmware aggregation is enabled, |
| * when anyone of three threshold conditions above is reached, |
| * firmware will send aggregated packet to driver. |
| */ |
| write_nic_dword(dev, 0x1a8, ulValue); |
| priv->bCurrentRxAggrEnable = true; |
| } |
| } |
| |
| lastTxOkCnt = priv->stats.txbytesunicast; |
| lastRxOkCnt = priv->stats.rxbytesunicast; |
| } // dm_CheckEdcaTurbo |
| #endif |
| |
| |
| |
| extern void hal_dm_watchdog(struct net_device *dev) |
| { |
| //struct r8192_priv *priv = ieee80211_priv(dev); |
| |
| //static u8 previous_bssid[6] ={0}; |
| |
| /*Add by amy 2008/05/15 ,porting from windows code.*/ |
| dm_check_rate_adaptive(dev); |
| dm_dynamic_txpower(dev); |
| dm_check_txrateandretrycount(dev); |
| dm_check_txpower_tracking(dev); |
| dm_ctrl_initgain_byrssi(dev); |
| dm_check_edca_turbo(dev); |
| dm_bandwidth_autoswitch(dev); |
| dm_check_rfctrl_gpio(dev); |
| dm_check_rx_path_selection(dev); |
| dm_check_fsync(dev); |
| |
| // Add by amy 2008-05-15 porting from windows code. |
| dm_check_pbc_gpio(dev); |
| dm_send_rssi_tofw(dev); |
| dm_ctstoself(dev); |
| #ifdef USB_RX_AGGREGATION_SUPPORT |
| dm_CheckRxAggregation(dev); |
| #endif |
| } //HalDmWatchDog |
| |
| |
| /* |
| * Decide Rate Adaptive Set according to distance (signal strength) |
| * 01/11/2008 MHC Modify input arguments and RATR table level. |
| * 01/16/2008 MHC RF_Type is assigned in ReadAdapterInfo(). We must call |
| * the function after making sure RF_Type. |
| */ |
| extern void init_rate_adaptive(struct net_device * dev) |
| { |
| |
| struct r8192_priv *priv = ieee80211_priv(dev); |
| prate_adaptive pra = (prate_adaptive)&priv->rate_adaptive; |
| |
| pra->ratr_state = DM_RATR_STA_MAX; |
| pra->high2low_rssi_thresh_for_ra = RateAdaptiveTH_High; |
| pra->low2high_rssi_thresh_for_ra20M = RateAdaptiveTH_Low_20M+5; |
| pra->low2high_rssi_thresh_for_ra40M = RateAdaptiveTH_Low_40M+5; |
| |
| pra->high_rssi_thresh_for_ra = RateAdaptiveTH_High+5; |
| pra->low_rssi_thresh_for_ra20M = RateAdaptiveTH_Low_20M; |
| pra->low_rssi_thresh_for_ra40M = RateAdaptiveTH_Low_40M; |
| |
| if(priv->CustomerID == RT_CID_819x_Netcore) |
| pra->ping_rssi_enable = 1; |
| else |
| pra->ping_rssi_enable = 0; |
| pra->ping_rssi_thresh_for_ra = 15; |
| |
| |
| if (priv->rf_type == RF_2T4R) |
| { |
| // 07/10/08 MH Modify for RA smooth scheme. |
| /* 2008/01/11 MH Modify 2T RATR table for different RSSI. 080515 porting by amy from windows code.*/ |
| pra->upper_rssi_threshold_ratr = 0x8f0f0000; |
| pra->middle_rssi_threshold_ratr = 0x8f0ff000; |
| pra->low_rssi_threshold_ratr = 0x8f0ff001; |
| pra->low_rssi_threshold_ratr_40M = 0x8f0ff005; |
| pra->low_rssi_threshold_ratr_20M = 0x8f0ff001; |
| pra->ping_rssi_ratr = 0x0000000d;//cosa add for test |
| } |
| else if (priv->rf_type == RF_1T2R) |
| { |
| pra->upper_rssi_threshold_ratr = 0x000f0000; |
| pra->middle_rssi_threshold_ratr = 0x000ff000; |
| pra->low_rssi_threshold_ratr = 0x000ff001; |
| pra->low_rssi_threshold_ratr_40M = 0x000ff005; |
| pra->low_rssi_threshold_ratr_20M = 0x000ff001; |
| pra->ping_rssi_ratr = 0x0000000d;//cosa add for test |
| } |
| |
| } // InitRateAdaptive |
| |
| |
| /*----------------------------------------------------------------------------- |
| * Function: dm_check_rate_adaptive() |
| * |
| * Overview: |
| * |
| * Input: NONE |
| * |
| * Output: NONE |
| * |
| * Return: NONE |
| * |
| * Revised History: |
| * When Who Remark |
| * 05/26/08 amy Create version 0 proting from windows code. |
| * |
| *---------------------------------------------------------------------------*/ |
| static void dm_check_rate_adaptive(struct net_device * dev) |
| { |
| struct r8192_priv *priv = ieee80211_priv(dev); |
| PRT_HIGH_THROUGHPUT pHTInfo = priv->ieee80211->pHTInfo; |
| prate_adaptive pra = (prate_adaptive)&priv->rate_adaptive; |
| u32 currentRATR, targetRATR = 0; |
| u32 LowRSSIThreshForRA = 0, HighRSSIThreshForRA = 0; |
| bool bshort_gi_enabled = false; |
| static u8 ping_rssi_state=0; |
| |
| |
| if(!priv->up) |
| { |
| RT_TRACE(COMP_RATE, "<---- dm_check_rate_adaptive(): driver is going to unload\n"); |
| return; |
| } |
| |
| if(pra->rate_adaptive_disabled)//this variable is set by ioctl. |
| return; |
| |
| // TODO: Only 11n mode is implemented currently, |
| if( !(priv->ieee80211->mode == WIRELESS_MODE_N_24G || |
| priv->ieee80211->mode == WIRELESS_MODE_N_5G)) |
| return; |
| |
| if( priv->ieee80211->state == IEEE80211_LINKED ) |
| { |
| // RT_TRACE(COMP_RATE, "dm_CheckRateAdaptive(): \t"); |
| |
| // |
| // Check whether Short GI is enabled |
| // |
| bshort_gi_enabled = (pHTInfo->bCurTxBW40MHz && pHTInfo->bCurShortGI40MHz) || |
| (!pHTInfo->bCurTxBW40MHz && pHTInfo->bCurShortGI20MHz); |
| |
| |
| pra->upper_rssi_threshold_ratr = |
| (pra->upper_rssi_threshold_ratr & (~BIT31)) | ((bshort_gi_enabled)? BIT31:0) ; |
| |
| pra->middle_rssi_threshold_ratr = |
| (pra->middle_rssi_threshold_ratr & (~BIT31)) | ((bshort_gi_enabled)? BIT31:0) ; |
| |
| if (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20) |
| { |
| pra->low_rssi_threshold_ratr = |
| (pra->low_rssi_threshold_ratr_40M & (~BIT31)) | ((bshort_gi_enabled)? BIT31:0) ; |
| } |
| else |
| { |
| pra->low_rssi_threshold_ratr = |
| (pra->low_rssi_threshold_ratr_20M & (~BIT31)) | ((bshort_gi_enabled)? BIT31:0) ; |
| } |
| //cosa add for test |
| pra->ping_rssi_ratr = |
| (pra->ping_rssi_ratr & (~BIT31)) | ((bshort_gi_enabled)? BIT31:0) ; |
| |
| /* 2007/10/08 MH We support RA smooth scheme now. When it is the first |
| time to link with AP. We will not change upper/lower threshold. If |
| STA stay in high or low level, we must change two different threshold |
| to prevent jumping frequently. */ |
| if (pra->ratr_state == DM_RATR_STA_HIGH) |
| { |
| HighRSSIThreshForRA = pra->high2low_rssi_thresh_for_ra; |
| LowRSSIThreshForRA = (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20)? |
| (pra->low_rssi_thresh_for_ra40M):(pra->low_rssi_thresh_for_ra20M); |
| } |
| else if (pra->ratr_state == DM_RATR_STA_LOW) |
| { |
| HighRSSIThreshForRA = pra->high_rssi_thresh_for_ra; |
| LowRSSIThreshForRA = (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20)? |
| (pra->low2high_rssi_thresh_for_ra40M):(pra->low2high_rssi_thresh_for_ra20M); |
| } |
| else |
| { |
| HighRSSIThreshForRA = pra->high_rssi_thresh_for_ra; |
| LowRSSIThreshForRA = (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20)? |
| (pra->low_rssi_thresh_for_ra40M):(pra->low_rssi_thresh_for_ra20M); |
| } |
| |
| //DbgPrint("[DM] THresh H/L=%d/%d\n\r", RATR.HighRSSIThreshForRA, RATR.LowRSSIThreshForRA); |
| if(priv->undecorated_smoothed_pwdb >= (long)HighRSSIThreshForRA) |
| { |
| //DbgPrint("[DM] RSSI=%d STA=HIGH\n\r", pHalData->UndecoratedSmoothedPWDB); |
| pra->ratr_state = DM_RATR_STA_HIGH; |
| targetRATR = pra->upper_rssi_threshold_ratr; |
| }else if(priv->undecorated_smoothed_pwdb >= (long)LowRSSIThreshForRA) |
| { |
| //DbgPrint("[DM] RSSI=%d STA=Middle\n\r", pHalData->UndecoratedSmoothedPWDB); |
| pra->ratr_state = DM_RATR_STA_MIDDLE; |
| targetRATR = pra->middle_rssi_threshold_ratr; |
| }else |
| { |
| //DbgPrint("[DM] RSSI=%d STA=LOW\n\r", pHalData->UndecoratedSmoothedPWDB); |
| pra->ratr_state = DM_RATR_STA_LOW; |
| targetRATR = pra->low_rssi_threshold_ratr; |
| } |
| |
| //cosa add for test |
| if(pra->ping_rssi_enable) |
| { |
| //pHalData->UndecoratedSmoothedPWDB = 19; |
| if(priv->undecorated_smoothed_pwdb < (long)(pra->ping_rssi_thresh_for_ra+5)) |
| { |
| if( (priv->undecorated_smoothed_pwdb < (long)pra->ping_rssi_thresh_for_ra) || |
| ping_rssi_state ) |
| { |
| //DbgPrint("TestRSSI = %d, set RATR to 0x%x \n", pHalData->UndecoratedSmoothedPWDB, pRA->TestRSSIRATR); |
| pra->ratr_state = DM_RATR_STA_LOW; |
| targetRATR = pra->ping_rssi_ratr; |
| ping_rssi_state = 1; |
| } |
| //else |
| // DbgPrint("TestRSSI is between the range. \n"); |
| } |
| else |
| { |
| //DbgPrint("TestRSSI Recover to 0x%x \n", targetRATR); |
| ping_rssi_state = 0; |
| } |
| } |
| |
| // 2008.04.01 |
| // For RTL819X, if pairwisekey = wep/tkip, we support only MCS0~7. |
| if(priv->ieee80211->GetHalfNmodeSupportByAPsHandler(dev)) |
| targetRATR &= 0xf00fffff; |
| |
| // |
| // Check whether updating of RATR0 is required |
| // |
| currentRATR = read_nic_dword(dev, RATR0); |
| if( targetRATR != currentRATR ) |
| { |
| u32 ratr_value; |
| ratr_value = targetRATR; |
| RT_TRACE(COMP_RATE,"currentRATR = %x, targetRATR = %x\n", currentRATR, targetRATR); |
| if(priv->rf_type == RF_1T2R) |
| { |
| ratr_value &= ~(RATE_ALL_OFDM_2SS); |
| } |
| write_nic_dword(dev, RATR0, ratr_value); |
| write_nic_byte(dev, UFWP, 1); |
| |
| pra->last_ratr = targetRATR; |
| } |
| |
| } |
| else |
| { |
| pra->ratr_state = DM_RATR_STA_MAX; |
| } |
| |
| } // dm_CheckRateAdaptive |
| |
| |
| static void dm_init_bandwidth_autoswitch(struct net_device * dev) |
| { |
| struct r8192_priv *priv = ieee80211_priv(dev); |
| |
| priv->ieee80211->bandwidth_auto_switch.threshold_20Mhzto40Mhz = BW_AUTO_SWITCH_LOW_HIGH; |
| priv->ieee80211->bandwidth_auto_switch.threshold_40Mhzto20Mhz = BW_AUTO_SWITCH_HIGH_LOW; |
| priv->ieee80211->bandwidth_auto_switch.bforced_tx20Mhz = false; |
| priv->ieee80211->bandwidth_auto_switch.bautoswitch_enable = false; |
| |
| } // dm_init_bandwidth_autoswitch |
| |
| |
| static void dm_bandwidth_autoswitch(struct net_device * dev) |
| { |
| struct r8192_priv *priv = ieee80211_priv(dev); |
| |
| if(priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20 ||!priv->ieee80211->bandwidth_auto_switch.bautoswitch_enable){ |
| return; |
| }else{ |
| if(priv->ieee80211->bandwidth_auto_switch.bforced_tx20Mhz == false){//If send packets in 40 Mhz in 20/40 |
| if(priv->undecorated_smoothed_pwdb <= priv->ieee80211->bandwidth_auto_switch.threshold_40Mhzto20Mhz) |
| priv->ieee80211->bandwidth_auto_switch.bforced_tx20Mhz = true; |
| }else{//in force send packets in 20 Mhz in 20/40 |
| if(priv->undecorated_smoothed_pwdb >= priv->ieee80211->bandwidth_auto_switch.threshold_20Mhzto40Mhz) |
| priv->ieee80211->bandwidth_auto_switch.bforced_tx20Mhz = false; |
| |
| } |
| } |
| } // dm_BandwidthAutoSwitch |
| |
| //OFDM default at 0db, index=6. |
| static u32 OFDMSwingTable[OFDM_Table_Length] = { |
| 0x7f8001fe, // 0, +6db |
| 0x71c001c7, // 1, +5db |
| 0x65400195, // 2, +4db |
| 0x5a400169, // 3, +3db |
| 0x50800142, // 4, +2db |
| 0x47c0011f, // 5, +1db |
| 0x40000100, // 6, +0db ===> default, upper for higher temprature, lower for low temprature |
| 0x390000e4, // 7, -1db |
| 0x32c000cb, // 8, -2db |
| 0x2d4000b5, // 9, -3db |
| 0x288000a2, // 10, -4db |
| 0x24000090, // 11, -5db |
| 0x20000080, // 12, -6db |
| 0x1c800072, // 13, -7db |
| 0x19800066, // 14, -8db |
| 0x26c0005b, // 15, -9db |
| 0x24400051, // 16, -10db |
| 0x12000048, // 17, -11db |
| 0x10000040 // 18, -12db |
| }; |
| |
| static u8 CCKSwingTable_Ch1_Ch13[CCK_Table_length][8] = { |
| {0x36, 0x35, 0x2e, 0x25, 0x1c, 0x12, 0x09, 0x04}, // 0, +0db ===> CCK40M default |
| {0x30, 0x2f, 0x29, 0x21, 0x19, 0x10, 0x08, 0x03}, // 1, -1db |
| {0x2b, 0x2a, 0x25, 0x1e, 0x16, 0x0e, 0x07, 0x03}, // 2, -2db |
| {0x26, 0x25, 0x21, 0x1b, 0x14, 0x0d, 0x06, 0x03}, // 3, -3db |
| {0x22, 0x21, 0x1d, 0x18, 0x11, 0x0b, 0x06, 0x02}, // 4, -4db |
| {0x1f, 0x1e, 0x1a, 0x15, 0x10, 0x0a, 0x05, 0x02}, // 5, -5db |
| {0x1b, 0x1a, 0x17, 0x13, 0x0e, 0x09, 0x04, 0x02}, // 6, -6db ===> CCK20M default |
| {0x18, 0x17, 0x15, 0x11, 0x0c, 0x08, 0x04, 0x02}, // 7, -7db |
| {0x16, 0x15, 0x12, 0x0f, 0x0b, 0x07, 0x04, 0x01}, // 8, -8db |
| {0x13, 0x13, 0x10, 0x0d, 0x0a, 0x06, 0x03, 0x01}, // 9, -9db |
| {0x11, 0x11, 0x0f, 0x0c, 0x09, 0x06, 0x03, 0x01}, // 10, -10db |
| {0x0f, 0x0f, 0x0d, 0x0b, 0x08, 0x05, 0x03, 0x01} // 11, -11db |
| }; |
| |
| static u8 CCKSwingTable_Ch14[CCK_Table_length][8] = { |
| {0x36, 0x35, 0x2e, 0x1b, 0x00, 0x00, 0x00, 0x00}, // 0, +0db ===> CCK40M default |
| {0x30, 0x2f, 0x29, 0x18, 0x00, 0x00, 0x00, 0x00}, // 1, -1db |
| {0x2b, 0x2a, 0x25, 0x15, 0x00, 0x00, 0x00, 0x00}, // 2, -2db |
| {0x26, 0x25, 0x21, 0x13, 0x00, 0x00, 0x00, 0x00}, // 3, -3db |
| {0x22, 0x21, 0x1d, 0x11, 0x00, 0x00, 0x00, 0x00}, // 4, -4db |
| {0x1f, 0x1e, 0x1a, 0x0f, 0x00, 0x00, 0x00, 0x00}, // 5, -5db |
| {0x1b, 0x1a, 0x17, 0x0e, 0x00, 0x00, 0x00, 0x00}, // 6, -6db ===> CCK20M default |
| {0x18, 0x17, 0x15, 0x0c, 0x00, 0x00, 0x00, 0x00}, // 7, -7db |
| {0x16, 0x15, 0x12, 0x0b, 0x00, 0x00, 0x00, 0x00}, // 8, -8db |
| {0x13, 0x13, 0x10, 0x0a, 0x00, 0x00, 0x00, 0x00}, // 9, -9db |
| {0x11, 0x11, 0x0f, 0x09, 0x00, 0x00, 0x00, 0x00}, // 10, -10db |
| {0x0f, 0x0f, 0x0d, 0x08, 0x00, 0x00, 0x00, 0x00} // 11, -11db |
| }; |
| |
| static void dm_TXPowerTrackingCallback_TSSI(struct net_device * dev) |
| { |
| struct r8192_priv *priv = ieee80211_priv(dev); |
| bool bHighpowerstate, viviflag = FALSE; |
| DCMD_TXCMD_T tx_cmd; |
| u8 powerlevelOFDM24G; |
| int i =0, j = 0, k = 0; |
| u8 RF_Type, tmp_report[5]={0, 0, 0, 0, 0}; |
| u32 Value; |
| u8 Pwr_Flag; |
| u16 Avg_TSSI_Meas, TSSI_13dBm, Avg_TSSI_Meas_from_driver=0; |
| //RT_STATUS rtStatus = RT_STATUS_SUCCESS; |
| bool rtStatus = true; |
| u32 delta=0; |
| |
| write_nic_byte(dev, 0x1ba, 0); |
| |
| priv->ieee80211->bdynamic_txpower_enable = false; |
| bHighpowerstate = priv->bDynamicTxHighPower; |
| |
| powerlevelOFDM24G = (u8)(priv->Pwr_Track>>24); |
| RF_Type = priv->rf_type; |
| Value = (RF_Type<<8) | powerlevelOFDM24G; |
| |
| RT_TRACE(COMP_POWER_TRACKING, "powerlevelOFDM24G = %x\n", powerlevelOFDM24G); |
| |
| for(j = 0; j<=30; j++) |
| { //fill tx_cmd |
| |
| tx_cmd.Op = TXCMD_SET_TX_PWR_TRACKING; |
| tx_cmd.Length = 4; |
| tx_cmd.Value = Value; |
| #ifdef RTL8192U |
| rtStatus = SendTxCommandPacket(dev, &tx_cmd, 12); |
| if (rtStatus == RT_STATUS_FAILURE) |
| { |
| RT_TRACE(COMP_POWER_TRACKING, "Set configuration with tx cmd queue fail!\n"); |
| } |
| #else |
| cmpk_message_handle_tx(dev, (u8*)&tx_cmd, |
| DESC_PACKET_TYPE_INIT, sizeof(DCMD_TXCMD_T)); |
| #endif |
| mdelay(1); |
| //DbgPrint("hi, vivi, strange\n"); |
| for(i = 0;i <= 30; i++) |
| { |
| Pwr_Flag = read_nic_byte(dev, 0x1ba); |
| |
| if (Pwr_Flag == 0) |
| { |
| mdelay(1); |
| continue; |
| } |
| #ifdef RTL8190P |
| Avg_TSSI_Meas = read_nic_word(dev, 0x1bc); |
| #else |
| Avg_TSSI_Meas = read_nic_word(dev, 0x13c); |
| #endif |
| if(Avg_TSSI_Meas == 0) |
| { |
| write_nic_byte(dev, 0x1ba, 0); |
| break; |
| } |
| |
| for(k = 0;k < 5; k++) |
| { |
| #ifdef RTL8190P |
| tmp_report[k] = read_nic_byte(dev, 0x1d8+k); |
| #else |
| if(k !=4) |
| tmp_report[k] = read_nic_byte(dev, 0x134+k); |
| else |
| tmp_report[k] = read_nic_byte(dev, 0x13e); |
| #endif |
| RT_TRACE(COMP_POWER_TRACKING, "TSSI_report_value = %d\n", tmp_report[k]); |
| } |
| |
| //check if the report value is right |
| for(k = 0;k < 5; k++) |
| { |
| if(tmp_report[k] <= 20) |
| { |
| viviflag =TRUE; |
| break; |
| } |
| } |
| if(viviflag ==TRUE) |
| { |
| write_nic_byte(dev, 0x1ba, 0); |
| viviflag = FALSE; |
| RT_TRACE(COMP_POWER_TRACKING, "we filted this data\n"); |
| for(k = 0;k < 5; k++) |
| tmp_report[k] = 0; |
| break; |
| } |
| |
| for(k = 0;k < 5; k++) |
| { |
| Avg_TSSI_Meas_from_driver += tmp_report[k]; |
| } |
| |
| Avg_TSSI_Meas_from_driver = Avg_TSSI_Meas_from_driver*100/5; |
| RT_TRACE(COMP_POWER_TRACKING, "Avg_TSSI_Meas_from_driver = %d\n", Avg_TSSI_Meas_from_driver); |
| TSSI_13dBm = priv->TSSI_13dBm; |
| RT_TRACE(COMP_POWER_TRACKING, "TSSI_13dBm = %d\n", TSSI_13dBm); |
| |
| //if(abs(Avg_TSSI_Meas_from_driver - TSSI_13dBm) <= E_FOR_TX_POWER_TRACK) |
| // For MacOS-compatible |
| if(Avg_TSSI_Meas_from_driver > TSSI_13dBm) |
| delta = Avg_TSSI_Meas_from_driver - TSSI_13dBm; |
| else |
| delta = TSSI_13dBm - Avg_TSSI_Meas_from_driver; |
| |
| if(delta <= E_FOR_TX_POWER_TRACK) |
| { |
| priv->ieee80211->bdynamic_txpower_enable = TRUE; |
| write_nic_byte(dev, 0x1ba, 0); |
| RT_TRACE(COMP_POWER_TRACKING, "tx power track is done\n"); |
| RT_TRACE(COMP_POWER_TRACKING, "priv->rfa_txpowertrackingindex = %d\n", priv->rfa_txpowertrackingindex); |
| RT_TRACE(COMP_POWER_TRACKING, "priv->rfa_txpowertrackingindex_real = %d\n", priv->rfa_txpowertrackingindex_real); |
| #ifdef RTL8190P |
| RT_TRACE(COMP_POWER_TRACKING, "priv->rfc_txpowertrackingindex = %d\n", priv->rfc_txpowertrackingindex); |
| RT_TRACE(COMP_POWER_TRACKING, "priv->rfc_txpowertrackingindex_real = %d\n", priv->rfc_txpowertrackingindex_real); |
| #endif |
| RT_TRACE(COMP_POWER_TRACKING, "priv->cck_present_attentuation_difference = %d\n", priv->cck_present_attentuation_difference); |
| RT_TRACE(COMP_POWER_TRACKING, "priv->cck_present_attentuation = %d\n", priv->cck_present_attentuation); |
| return; |
| } |
| else |
| { |
| if(Avg_TSSI_Meas_from_driver < TSSI_13dBm - E_FOR_TX_POWER_TRACK) |
| { |
| if((priv->rfa_txpowertrackingindex > 0) |
| #ifdef RTL8190P |
| &&(priv->rfc_txpowertrackingindex > 0) |
| #endif |
| ) |
| { |
| priv->rfa_txpowertrackingindex--; |
| if(priv->rfa_txpowertrackingindex_real > 4) |
| { |
| priv->rfa_txpowertrackingindex_real--; |
| rtl8192_setBBreg(dev, rOFDM0_XATxIQImbalance, bMaskDWord, priv->txbbgain_table[priv->rfa_txpowertrackingindex_real].txbbgain_value); |
| } |
| #ifdef RTL8190P |
| priv->rfc_txpowertrackingindex--; |
| if(priv->rfc_txpowertrackingindex_real > 4) |
| { |
| priv->rfc_txpowertrackingindex_real--; |
| rtl8192_setBBreg(dev, rOFDM0_XCTxIQImbalance, bMaskDWord, priv->txbbgain_table[priv->rfc_txpowertrackingindex_real].txbbgain_value); |
| } |
| #endif |
| } |
| } |
| else |
| { |
| if((priv->rfa_txpowertrackingindex < 36) |
| #ifdef RTL8190P |
| &&(priv->rfc_txpowertrackingindex < 36) |
| #endif |
| ) |
| { |
| priv->rfa_txpowertrackingindex++; |
| priv->rfa_txpowertrackingindex_real++; |
| rtl8192_setBBreg(dev, rOFDM0_XATxIQImbalance, bMaskDWord, priv->txbbgain_table[priv->rfa_txpowertrackingindex_real].txbbgain_value); |
| |
| #ifdef RTL8190P |
| priv->rfc_txpowertrackingindex++; |
| priv->rfc_txpowertrackingindex_real++; |
| rtl8192_setBBreg(dev, rOFDM0_XCTxIQImbalance, bMaskDWord, priv->txbbgain_table[priv->rfc_txpowertrackingindex_real].txbbgain_value); |
| #endif |
| } |
| } |
| priv->cck_present_attentuation_difference |
| = priv->rfa_txpowertrackingindex - priv->rfa_txpowertracking_default; |
| |
| if(priv->CurrentChannelBW == HT_CHANNEL_WIDTH_20) |
| priv->cck_present_attentuation |
| = priv->cck_present_attentuation_20Mdefault + priv->cck_present_attentuation_difference; |
| else |
| priv->cck_present_attentuation |
| = priv->cck_present_attentuation_40Mdefault + priv->cck_present_attentuation_difference; |
| |
| if(priv->cck_present_attentuation > -1&&priv->cck_present_attentuation <23) |
| { |
| if(priv->ieee80211->current_network.channel == 14 && !priv->bcck_in_ch14) |
| { |
| priv->bcck_in_ch14 = TRUE; |
| dm_cck_txpower_adjust(dev,priv->bcck_in_ch14); |
| } |
| else if(priv->ieee80211->current_network.channel != 14 && priv->bcck_in_ch14) |
| { |
| priv->bcck_in_ch14 = FALSE; |
| dm_cck_txpower_adjust(dev,priv->bcck_in_ch14); |
| } |
| else |
| dm_cck_txpower_adjust(dev,priv->bcck_in_ch14); |
| } |
| RT_TRACE(COMP_POWER_TRACKING, "priv->rfa_txpowertrackingindex = %d\n", priv->rfa_txpowertrackingindex); |
| RT_TRACE(COMP_POWER_TRACKING, "priv->rfa_txpowertrackingindex_real = %d\n", priv->rfa_txpowertrackingindex_real); |
| #ifdef RTL8190P |
| RT_TRACE(COMP_POWER_TRACKING, "priv->rfc_txpowertrackingindex = %d\n", priv->rfc_txpowertrackingindex); |
| RT_TRACE(COMP_POWER_TRACKING, "priv->rfc_txpowertrackingindex_real = %d\n", priv->rfc_txpowertrackingindex_real); |
| #endif |
| RT_TRACE(COMP_POWER_TRACKING, "priv->cck_present_attentuation_difference = %d\n", priv->cck_present_attentuation_difference); |
| RT_TRACE(COMP_POWER_TRACKING, "priv->cck_present_attentuation = %d\n", priv->cck_present_attentuation); |
| |
| if (priv->cck_present_attentuation_difference <= -12||priv->cck_present_attentuation_difference >= 24) |
| { |
| priv->ieee80211->bdynamic_txpower_enable = TRUE; |
| write_nic_byte(dev, 0x1ba, 0); |
| RT_TRACE(COMP_POWER_TRACKING, "tx power track--->limited\n"); |
| return; |
| } |
| |
| |
| } |
| write_nic_byte(dev, 0x1ba, 0); |
| Avg_TSSI_Meas_from_driver = 0; |
| for(k = 0;k < 5; k++) |
| tmp_report[k] = 0; |
| break; |
| } |
| } |
| priv->ieee80211->bdynamic_txpower_enable = TRUE; |
| write_nic_byte(dev, 0x1ba, 0); |
| } |
| |
| static void dm_TXPowerTrackingCallback_ThermalMeter(struct net_device * dev) |
| { |
| #define ThermalMeterVal 9 |
| struct r8192_priv *priv = ieee80211_priv(dev); |
| u32 tmpRegA, TempCCk; |
| u8 tmpOFDMindex, tmpCCKindex, tmpCCK20Mindex, tmpCCK40Mindex, tmpval; |
| int i =0, CCKSwingNeedUpdate=0; |
| |
| if(!priv->btxpower_trackingInit) |
| { |
| //Query OFDM default setting |
| tmpRegA= rtl8192_QueryBBReg(dev, rOFDM0_XATxIQImbalance, bMaskDWord); |
| for(i=0; i<OFDM_Table_Length; i++) //find the index |
| { |
| if(tmpRegA == OFDMSwingTable[i]) |
| { |
| priv->OFDM_index= (u8)i; |
| RT_TRACE(COMP_POWER_TRACKING, "Initial reg0x%x = 0x%x, OFDM_index=0x%x\n", |
| rOFDM0_XATxIQImbalance, tmpRegA, priv->OFDM_index); |
| } |
| } |
| |
| //Query CCK default setting From 0xa22 |
| TempCCk = rtl8192_QueryBBReg(dev, rCCK0_TxFilter1, bMaskByte2); |
| for(i=0 ; i<CCK_Table_length ; i++) |
| { |
| if(TempCCk == (u32)CCKSwingTable_Ch1_Ch13[i][0]) |
| { |
| priv->CCK_index =(u8) i; |
| RT_TRACE(COMP_POWER_TRACKING, "Initial reg0x%x = 0x%x, CCK_index=0x%x\n", |
| rCCK0_TxFilter1, TempCCk, priv->CCK_index); |
| break; |
| } |
| } |
| priv->btxpower_trackingInit = TRUE; |
| //pHalData->TXPowercount = 0; |
| return; |
| } |
| |
| //========================== |
| // this is only for test, should be masked |
| //========================== |
| |
| // read and filter out unreasonable value |
| tmpRegA = rtl8192_phy_QueryRFReg(dev, RF90_PATH_A, 0x12, 0x078); // 0x12: RF Reg[10:7] |
| RT_TRACE(COMP_POWER_TRACKING, "Readback ThermalMeterA = %d \n", tmpRegA); |
| if(tmpRegA < 3 || tmpRegA > 13) |
| return; |
| if(tmpRegA >= 12) // if over 12, TP will be bad when high temprature |
| tmpRegA = 12; |
| RT_TRACE(COMP_POWER_TRACKING, "Valid ThermalMeterA = %d \n", tmpRegA); |
| priv->ThermalMeter[0] = ThermalMeterVal; //We use fixed value by Bryant's suggestion |
| priv->ThermalMeter[1] = ThermalMeterVal; //We use fixed value by Bryant's suggestion |
| |
| //Get current RF-A temprature index |
| if(priv->ThermalMeter[0] >= (u8)tmpRegA) //lower temprature |
| { |
| tmpOFDMindex = tmpCCK20Mindex = 6+(priv->ThermalMeter[0]-(u8)tmpRegA); |
| tmpCCK40Mindex = tmpCCK20Mindex - 6; |
| if(tmpOFDMindex >= OFDM_Table_Length) |
| tmpOFDMindex = OFDM_Table_Length-1; |
| if(tmpCCK20Mindex >= CCK_Table_length) |
| tmpCCK20Mindex = CCK_Table_length-1; |
| if(tmpCCK40Mindex >= CCK_Table_length) |
| tmpCCK40Mindex = CCK_Table_length-1; |
| } |
| else |
| { |
| tmpval = ((u8)tmpRegA - priv->ThermalMeter[0]); |
| if(tmpval >= 6) // higher temprature |
| tmpOFDMindex = tmpCCK20Mindex = 0; // max to +6dB |
| else |
| tmpOFDMindex = tmpCCK20Mindex = 6 - tmpval; |
| tmpCCK40Mindex = 0; |
| } |
| //DbgPrint("%ddb, tmpOFDMindex = %d, tmpCCK20Mindex = %d, tmpCCK40Mindex = %d", |
| //((u1Byte)tmpRegA - pHalData->ThermalMeter[0]), |
| //tmpOFDMindex, tmpCCK20Mindex, tmpCCK40Mindex); |
| if(priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20) //40M |
| tmpCCKindex = tmpCCK40Mindex; |
| else |
| tmpCCKindex = tmpCCK20Mindex; |
| |
| if(priv->ieee80211->current_network.channel == 14 && !priv->bcck_in_ch14) |
| { |
| priv->bcck_in_ch14 = TRUE; |
| CCKSwingNeedUpdate = 1; |
| } |
| else if(priv->ieee80211->current_network.channel != 14 && priv->bcck_in_ch14) |
| { |
| priv->bcck_in_ch14 = FALSE; |
| CCKSwingNeedUpdate = 1; |
| } |
| |
| if(priv->CCK_index != tmpCCKindex) |
| { |
| priv->CCK_index = tmpCCKindex; |
| CCKSwingNeedUpdate = 1; |
| } |
| |
| if(CCKSwingNeedUpdate) |
| { |
| //DbgPrint("Update CCK Swing, CCK_index = %d\n", pHalData->CCK_index); |
| dm_cck_txpower_adjust(dev, priv->bcck_in_ch14); |
| } |
| if(priv->OFDM_index != tmpOFDMindex) |
| { |
| priv->OFDM_index = tmpOFDMindex; |
| rtl8192_setBBreg(dev, rOFDM0_XATxIQImbalance, bMaskDWord, OFDMSwingTable[priv->OFDM_index]); |
| RT_TRACE(COMP_POWER_TRACKING, "Update OFDMSwing[%d] = 0x%x\n", |
| priv->OFDM_index, OFDMSwingTable[priv->OFDM_index]); |
| } |
| priv->txpower_count = 0; |
| } |
| |
| extern void dm_txpower_trackingcallback(struct work_struct *work) |
| { |
| struct delayed_work *dwork = container_of(work,struct delayed_work,work); |
| struct r8192_priv *priv = container_of(dwork,struct r8192_priv,txpower_tracking_wq); |
| struct net_device *dev = priv->ieee80211->dev; |
| |
| #ifdef RTL8190P |
| dm_TXPowerTrackingCallback_TSSI(dev); |
| #else |
| if(priv->bDcut == TRUE) |
| dm_TXPowerTrackingCallback_TSSI(dev); |
| else |
| dm_TXPowerTrackingCallback_ThermalMeter(dev); |
| #endif |
| } |
| |
| |
| static void dm_InitializeTXPowerTracking_TSSI(struct net_device *dev) |
| { |
| |
| struct r8192_priv *priv = ieee80211_priv(dev); |
| |
| //Initial the Tx BB index and mapping value |
| priv->txbbgain_table[0].txbb_iq_amplifygain = 12; |
| priv->txbbgain_table[0].txbbgain_value=0x7f8001fe; |
| priv->txbbgain_table[1].txbb_iq_amplifygain = 11; |
| priv->txbbgain_table[1].txbbgain_value=0x788001e2; |
| priv->txbbgain_table[2].txbb_iq_amplifygain = 10; |
| priv->txbbgain_table[2].txbbgain_value=0x71c001c7; |
| priv->txbbgain_table[3].txbb_iq_amplifygain = 9; |
| priv->txbbgain_table[3].txbbgain_value=0x6b8001ae; |
| priv->txbbgain_table[4].txbb_iq_amplifygain = 8; |
| priv->txbbgain_table[4].txbbgain_value=0x65400195; |
| priv->txbbgain_table[5].txbb_iq_amplifygain = 7; |
| priv->txbbgain_table[5].txbbgain_value=0x5fc0017f; |
| priv->txbbgain_table[6].txbb_iq_amplifygain = 6; |
| priv->txbbgain_table[6].txbbgain_value=0x5a400169; |
| priv->txbbgain_table[7].txbb_iq_amplifygain = 5; |
| priv->txbbgain_table[7].txbbgain_value=0x55400155; |
| priv->txbbgain_table[8].txbb_iq_amplifygain = 4; |
| priv->txbbgain_table[8].txbbgain_value=0x50800142; |
| priv->txbbgain_table[9].txbb_iq_amplifygain = 3; |
| priv->txbbgain_table[9].txbbgain_value=0x4c000130; |
| priv->txbbgain_table[10].txbb_iq_amplifygain = 2; |
| priv->txbbgain_table[10].txbbgain_value=0x47c0011f; |
| priv->txbbgain_table[11].txbb_iq_amplifygain = 1; |
| priv->txbbgain_table[11].txbbgain_value=0x43c0010f; |
| priv->txbbgain_table[12].txbb_iq_amplifygain = 0; |
| priv->txbbgain_table[12].txbbgain_value=0x40000100; |
| priv->txbbgain_table[13].txbb_iq_amplifygain = -1; |
| priv->txbbgain_table[13].txbbgain_value=0x3c8000f2; |
| priv->txbbgain_table[14].txbb_iq_amplifygain = -2; |
| priv->txbbgain_table[14].txbbgain_value=0x390000e4; |
| priv->txbbgain_table[15].txbb_iq_amplifygain = -3; |
| priv->txbbgain_table[15].txbbgain_value=0x35c000d7; |
| priv->txbbgain_table[16].txbb_iq_amplifygain = -4; |
| priv->txbbgain_table[16].txbbgain_value=0x32c000cb; |
| priv->txbbgain_table[17].txbb_iq_amplifygain = -5; |
| priv->txbbgain_table[17].txbbgain_value=0x300000c0; |
| priv->txbbgain_table[18].txbb_iq_amplifygain = -6; |
| priv->txbbgain_table[18].txbbgain_value=0x2d4000b5; |
| priv->txbbgain_table[19].txbb_iq_amplifygain = -7; |
| priv->txbbgain_table[19].txbbgain_value=0x2ac000ab; |
| priv->txbbgain_table[20].txbb_iq_amplifygain = -8; |
| priv->txbbgain_table[20].txbbgain_value=0x288000a2; |
| priv->txbbgain_table[21].txbb_iq_amplifygain = -9; |
| priv->txbbgain_table[21].txbbgain_value=0x26000098; |
| priv->txbbgain_table[22].txbb_iq_amplifygain = -10; |
| priv->txbbgain_table[22].txbbgain_value=0x24000090; |
| priv->txbbgain_table[23].txbb_iq_amplifygain = -11; |
| priv->txbbgain_table[23].txbbgain_value=0x22000088; |
| priv->txbbgain_table[24].txbb_iq_amplifygain = -12; |
| priv->txbbgain_table[24].txbbgain_value=0x20000080; |
| priv->txbbgain_table[25].txbb_iq_amplifygain = -13; |
| priv->txbbgain_table[25].txbbgain_value=0x1a00006c; |
| priv->txbbgain_table[26].txbb_iq_amplifygain = -14; |
| priv->txbbgain_table[26].txbbgain_value=0x1c800072; |
| priv->txbbgain_table[27].txbb_iq_amplifygain = -15; |
| priv->txbbgain_table[27].txbbgain_value=0x18000060; |
| priv->txbbgain_table[28].txbb_iq_amplifygain = -16; |
| priv->txbbgain_table[28].txbbgain_value=0x19800066; |
| priv->txbbgain_table[29].txbb_iq_amplifygain = -17; |
| priv->txbbgain_table[29].txbbgain_value=0x15800056; |
| priv->txbbgain_table[30].txbb_iq_amplifygain = -18; |
| priv->txbbgain_table[30].txbbgain_value=0x26c0005b; |
| priv->txbbgain_table[31].txbb_iq_amplifygain = -19; |
| priv->txbbgain_table[31].txbbgain_value=0x14400051; |
| priv->txbbgain_table[32].txbb_iq_amplifygain = -20; |
| priv->txbbgain_table[32].txbbgain_value=0x24400051; |
| priv->txbbgain_table[33].txbb_iq_amplifygain = -21; |
| priv->txbbgain_table[33].txbbgain_value=0x1300004c; |
| priv->txbbgain_table[34].txbb_iq_amplifygain = -22; |
| priv->txbbgain_table[34].txbbgain_value=0x12000048; |
| priv->txbbgain_table[35].txbb_iq_amplifygain = -23; |
| priv->txbbgain_table[35].txbbgain_value=0x11000044; |
| priv->txbbgain_table[36].txbb_iq_amplifygain = -24; |
| priv->txbbgain_table[36].txbbgain_value=0x10000040; |
| |
| //ccktxbb_valuearray[0] is 0xA22 [1] is 0xA24 ...[7] is 0xA29 |
| //This Table is for CH1~CH13 |
| priv->cck_txbbgain_table[0].ccktxbb_valuearray[0] = 0x36; |
| priv->cck_txbbgain_table[0].ccktxbb_valuearray[1] = 0x35; |
| priv->cck_txbbgain_table[0].ccktxbb_valuearray[2] = 0x2e; |
| priv->cck_txbbgain_table[0].ccktxbb_valuearray[3] = 0x25; |
| priv->cck_txbbgain_table[0].ccktxbb_valuearray[4] = 0x1c; |
| priv->cck_txbbgain_table[0].ccktxbb_valuearray[5] = 0x12; |
| priv->cck_txbbgain_table[0].ccktxbb_valuearray[6] = 0x09; |
| priv->cck_txbbgain_table[0].ccktxbb_valuearray[7] = 0x04; |
| |
| priv->cck_txbbgain_table[1].ccktxbb_valuearray[0] = 0x33; |
| priv->cck_txbbgain_table[1].ccktxbb_valuearray[1] = 0x32; |
| priv->cck_txbbgain_table[1].ccktxbb_valuearray[2] = 0x2b; |
| priv->cck_txbbgain_table[1].ccktxbb_valuearray[3] = 0x23; |
| priv->cck_txbbgain_table[1].ccktxbb_valuearray[4] = 0x1a; |
| priv->cck_txbbgain_table[1].ccktxbb_valuearray[5] = 0x11; |
| priv->cck_txbbgain_table[1].ccktxbb_valuearray[6] = 0x08; |
| priv->cck_txbbgain_table[1].ccktxbb_valuearray[7] = 0x04; |
| |
| priv->cck_txbbgain_table[2].ccktxbb_valuearray[0] = 0x30; |
| priv->cck_txbbgain_table[2].ccktxbb_valuearray[1] = 0x2f; |
| priv->cck_txbbgain_table[2].ccktxbb_valuearray[2] = 0x29; |
| priv->cck_txbbgain_table[2].ccktxbb_valuearray[3] = 0x21; |
| priv->cck_txbbgain_table[2].ccktxbb_valuearray[4] = 0x19; |
| priv->cck_txbbgain_table[2].ccktxbb_valuearray[5] = 0x10; |
| priv->cck_txbbgain_table[2].ccktxbb_valuearray[6] = 0x08; |
| priv->cck_txbbgain_table[2].ccktxbb_valuearray[7] = 0x03; |
| |
| priv->cck_txbbgain_table[3].ccktxbb_valuearray[0] = 0x2d; |
| priv->cck_txbbgain_table[3].ccktxbb_valuearray[1] = 0x2d; |
| priv->cck_txbbgain_table[3].ccktxbb_valuearray[2] = 0x27; |
| priv->cck_txbbgain_table[3].ccktxbb_valuearray[3] = 0x1f; |
| priv->cck_txbbgain_table[3].ccktxbb_valuearray[4] = 0x18; |
| priv->cck_txbbgain_table[3].ccktxbb_valuearray[5] = 0x0f; |
| priv->cck_txbbgain_table[3].ccktxbb_valuearray[6] = 0x08; |
| priv->cck_txbbgain_table[3].ccktxbb_valuearray[7] = 0x03; |
| |
| priv->cck_txbbgain_table[4].ccktxbb_valuearray[0] = 0x2b; |
| priv->cck_txbbgain_table[4].ccktxbb_valuearray[1] = 0x2a; |
| priv->cck_txbbgain_table[4].ccktxbb_valuearray[2] = 0x25; |
| priv->cck_txbbgain_table[4].ccktxbb_valuearray[3] = 0x1e; |
| priv->cck_txbbgain_table[4].ccktxbb_valuearray[4] = 0x16; |
| priv->cck_txbbgain_table[4].ccktxbb_valuearray[5] = 0x0e; |
| priv->cck_txbbgain_table[4].ccktxbb_valuearray[6] = 0x07; |
| priv->cck_txbbgain_table[4].ccktxbb_valuearray[7] = 0x03; |
| |
| priv->cck_txbbgain_table[5].ccktxbb_valuearray[0] = 0x28; |
| priv->cck_txbbgain_table[5].ccktxbb_valuearray[1] = 0x28; |
| priv->cck_txbbgain_table[5].ccktxbb_valuearray[2] = 0x22; |
| priv->cck_txbbgain_table[5].ccktxbb_valuearray[3] = 0x1c; |
| priv->cck_txbbgain_table[5].ccktxbb_valuearray[4] = 0x15; |
| priv->cck_txbbgain_table[5].ccktxbb_valuearray[5] = 0x0d; |
| priv->cck_txbbgain_table[5].ccktxbb_valuearray[6] = 0x07; |
| priv->cck_txbbgain_table[5].ccktxbb_valuearray[7] = 0x03; |
| |
| priv->cck_txbbgain_table[6].ccktxbb_valuearray[0] = 0x26; |
| priv->cck_txbbgain_table[6].ccktxbb_valuearray[1] = 0x25; |
| priv->cck_txbbgain_table[6].ccktxbb_valuearray[2] = 0x21; |
| priv->cck_txbbgain_table[6].ccktxbb_valuearray[3] = 0x1b; |
| priv->cck_txbbgain_table[6].ccktxbb_valuearray[4] = 0x14; |
| priv->cck_txbbgain_table[6].ccktxbb_valuearray[5] = 0x0d; |
| priv->cck_txbbgain_table[6].ccktxbb_valuearray[6] = 0x06; |
| priv->cck_txbbgain_table[6].ccktxbb_valuearray[7] = 0x03; |
| |
| priv->cck_txbbgain_table[7].ccktxbb_valuearray[0] = 0x24; |
| priv->cck_txbbgain_table[7].ccktxbb_valuearray[1] = 0x23; |
| priv->cck_txbbgain_table[7].ccktxbb_valuearray[2] = 0x1f; |
| priv->cck_txbbgain_table[7].ccktxbb_valuearray[3] = 0x19; |
| priv->cck_txbbgain_table[7].ccktxbb_valuearray[4] = 0x13; |
| priv->cck_txbbgain_table[7].ccktxbb_valuearray[5] = 0x0c; |
| priv->cck_txbbgain_table[7].ccktxbb_valuearray[6] = 0x06; |
| priv->cck_txbbgain_table[7].ccktxbb_valuearray[7] = 0x03; |
| |
| priv->cck_txbbgain_table[8].ccktxbb_valuearray[0] = 0x22; |
| priv->cck_txbbgain_table[8].ccktxbb_valuearray[1] = 0x21; |
| priv->cck_txbbgain_table[8].ccktxbb_valuearray[2] = 0x1d; |
| priv->cck_txbbgain_table[8].ccktxbb_valuearray[3] = 0x18; |
| priv->cck_txbbgain_table[8].ccktxbb_valuearray[4] = 0x11; |
| priv->cck_txbbgain_table[8].ccktxbb_valuearray[5] = 0x0b; |
| priv->cck_txbbgain_table[8].ccktxbb_valuearray[6] = 0x06; |
| priv->cck_txbbgain_table[8].ccktxbb_valuearray[7] = 0x02; |
| |
| priv->cck_txbbgain_table[9].ccktxbb_valuearray[0] = 0x20; |
| priv->cck_txbbgain_table[9].ccktxbb_valuearray[1] = 0x20; |
| priv->cck_txbbgain_table[9].ccktxbb_valuearray[2] = 0x1b; |
| priv->cck_txbbgain_table[9].ccktxbb_valuearray[3] = 0x16; |
| priv->cck_txbbgain_table[9].ccktxbb_valuearray[4] = 0x11; |
| priv->cck_txbbgain_table[9].ccktxbb_valuearray[5] = 0x08; |
| priv->cck_txbbgain_table[9].ccktxbb_valuearray[6] = 0x05; |
| priv->cck_txbbgain_table[9].ccktxbb_valuearray[7] = 0x02; |
| |
| priv->cck_txbbgain_table[10].ccktxbb_valuearray[0] = 0x1f; |
| priv->cck_txbbgain_table[10].ccktxbb_valuearray[1] = 0x1e; |
| priv->cck_txbbgain_table[10].ccktxbb_valuearray[2] = 0x1a; |
| priv->cck_txbbgain_table[10].ccktxbb_valuearray[3] = 0x15; |
| priv->cck_txbbgain_table[10].ccktxbb_valuearray[4] = 0x10; |
| priv->cck_txbbgain_table[10].ccktxbb_valuearray[5] = 0x0a; |
| priv->cck_txbbgain_table[10].ccktxbb_valuearray[6] = 0x05; |
| priv->cck_txbbgain_table[10].ccktxbb_valuearray[7] = 0x02; |
| |
| priv->cck_txbbgain_table[11].ccktxbb_valuearray[0] = 0x1d; |
| priv->cck_txbbgain_table[11].ccktxbb_valuearray[1] = 0x1c; |
| priv->cck_txbbgain_table[11].ccktxbb_valuearray[2] = 0x18; |
| priv->cck_txbbgain_table[11].ccktxbb_valuearray[3] = 0x14; |
| priv->cck_txbbgain_table[11].ccktxbb_valuearray[4] = 0x0f; |
| priv->cck_txbbgain_table[11].ccktxbb_valuearray[5] = 0x0a; |
| priv->cck_txbbgain_table[11].ccktxbb_valuearray[6] = 0x05; |
| priv->cck_txbbgain_table[11].ccktxbb_valuearray[7] = 0x02; |
| |
| priv->cck_txbbgain_table[12].ccktxbb_valuearray[0] = 0x1b; |
| priv->cck_txbbgain_table[12].ccktxbb_valuearray[1] = 0x1a; |
| priv->cck_txbbgain_table[12].ccktxbb_valuearray[2] = 0x17; |
| priv->cck_txbbgain_table[12].ccktxbb_valuearray[3] = 0x13; |
| priv->cck_txbbgain_table[12].ccktxbb_valuearray[4] = 0x0e; |
| priv->cck_txbbgain_table[12].ccktxbb_valuearray[5] = 0x09; |
| priv->cck_txbbgain_table[12].ccktxbb_valuearray[6] = 0x04; |
| priv->cck_txbbgain_table[12].ccktxbb_valuearray[7] = 0x02; |
| |
| priv->cck_txbbgain_table[13].ccktxbb_valuearray[0] = 0x1a; |
| priv->cck_txbbgain_table[13].ccktxbb_valuearray[1] = 0x19; |
| priv->cck_txbbgain_table[13].ccktxbb_valuearray[2] = 0x16; |
| priv->cck_txbbgain_table[13].ccktxbb_valuearray[3] = 0x12; |
| priv->cck_txbbgain_table[13].ccktxbb_valuearray[4] = 0x0d; |
| priv->cck_txbbgain_table[13].ccktxbb_valuearray[5] = 0x09; |
| priv->cck_txbbgain_table[13].ccktxbb_valuearray[6] = 0x04; |
| priv->cck_txbbgain_table[13].ccktxbb_valuearray[7] = 0x02; |
| |
| priv->cck_txbbgain_table[14].ccktxbb_valuearray[0] = 0x18; |
| priv->cck_txbbgain_table[14].ccktxbb_valuearray[1] = 0x17; |
| priv->cck_txbbgain_table[14].ccktxbb_valuearray[2] = 0x15; |
| priv->cck_txbbgain_table[14].ccktxbb_valuearray[3] = 0x11; |
| priv->cck_txbbgain_table[14].ccktxbb_valuearray[4] = 0x0c; |
| priv->cck_txbbgain_table[14].ccktxbb_valuearray[5] = 0x08; |
| priv->cck_txbbgain_table[14].ccktxbb_valuearray[6] = 0x04; |
| priv->cck_txbbgain_table[14].ccktxbb_valuearray[7] = 0x02; |
| |
| priv->cck_txbbgain_table[15].ccktxbb_valuearray[0] = 0x17; |
| priv->cck_txbbgain_table[15].ccktxbb_valuearray[1] = 0x16; |
| priv->cck_txbbgain_table[15].ccktxbb_valuearray[2] = 0x13; |
| priv->cck_txbbgain_table[15].ccktxbb_valuearray[3] = 0x10; |
| priv->cck_txbbgain_table[15].ccktxbb_valuearray[4] = 0x0c; |
| priv->cck_txbbgain_table[15].ccktxbb_valuearray[5] = 0x08; |
| priv->cck_txbbgain_table[15].ccktxbb_valuearray[6] = 0x04; |
| priv->cck_txbbgain_table[15].ccktxbb_valuearray[7] = 0x02; |
| |
| priv->cck_txbbgain_table[16].ccktxbb_valuearray[0] = 0x16; |
| priv->cck_txbbgain_table[16].ccktxbb_valuearray[1] = 0x15; |
| priv->cck_txbbgain_table[16].ccktxbb_valuearray[2] = 0x12; |
| priv->cck_txbbgain_table[16].ccktxbb_valuearray[3] = 0x0f; |
| priv->cck_txbbgain_table[16].ccktxbb_valuearray[4] = 0x0b; |
| priv->cck_txbbgain_table[16].ccktxbb_valuearray[5] = 0x07; |
| priv->cck_txbbgain_table[16].ccktxbb_valuearray[6] = 0x04; |
| priv->cck_txbbgain_table[16].ccktxbb_valuearray[7] = 0x01; |
| |
| priv->cck_txbbgain_table[17].ccktxbb_valuearray[0] = 0x14; |
| priv->cck_txbbgain_table[17].ccktxbb_valuearray[1] = 0x14; |
| priv->cck_txbbgain_table[17].ccktxbb_valuearray[2] = 0x11; |
| priv->cck_txbbgain_table[17].ccktxbb_valuearray[3] = 0x0e; |
| priv->cck_txbbgain_table[17].ccktxbb_valuearray[4] = 0x0b; |
| priv->cck_txbbgain_table[17].ccktxbb_valuearray[5] = 0x07; |
| priv->cck_txbbgain_table[17].ccktxbb_valuearray[6] = 0x03; |
| priv->cck_txbbgain_table[17].ccktxbb_valuearray[7] = 0x02; |
| |
| priv->cck_txbbgain_table[18].ccktxbb_valuearray[0] = 0x13; |
| priv->cck_txbbgain_table[18].ccktxbb_valuearray[1] = 0x13; |
| priv->cck_txbbgain_table[18].ccktxbb_valuearray[2] = 0x10; |
| priv->cck_txbbgain_table[18].ccktxbb_valuearray[3] = 0x0d; |
| priv->cck_txbbgain_table[18].ccktxbb_valuearray[4] = 0x0a; |
| priv->cck_txbbgain_table[18].ccktxbb_valuearray[5] = 0x06; |
| priv->cck_txbbgain_table[18].ccktxbb_valuearray[6] = 0x03; |
| priv->cck_txbbgain_table[18].ccktxbb_valuearray[7] = 0x01; |
| |
| priv->cck_txbbgain_table[19].ccktxbb_valuearray[0] = 0x12; |
| priv->cck_txbbgain_table[19].ccktxbb_valuearray[1] = 0x12; |
| priv->cck_txbbgain_table[19].ccktxbb_valuearray[2] = 0x0f; |
| priv->cck_txbbgain_table[19].ccktxbb_valuearray[3] = 0x0c; |
| priv->cck_txbbgain_table[19].ccktxbb_valuearray[4] = 0x09; |
| priv->cck_txbbgain_table[19].ccktxbb_valuearray[5] = 0x06; |
| priv->cck_txbbgain_table[19].ccktxbb_valuearray[6] = 0x03; |
| priv->cck_txbbgain_table[19].ccktxbb_valuearray[7] = 0x01; |
| |
| priv->cck_txbbgain_table[20].ccktxbb_valuearray[0] = 0x11; |
| priv->cck_txbbgain_table[20].ccktxbb_valuearray[1] = 0x11; |
| priv->cck_txbbgain_table[20].ccktxbb_valuearray[2] = 0x0f; |
| priv->cck_txbbgain_table[20].ccktxbb_valuearray[3] = 0x0c; |
| priv->cck_txbbgain_table[20].ccktxbb_valuearray[4] = 0x09; |
| priv->cck_txbbgain_table[20].ccktxbb_valuearray[5] = 0x06; |
| priv->cck_txbbgain_table[20].ccktxbb_valuearray[6] = 0x03; |
| priv->cck_txbbgain_table[20].ccktxbb_valuearray[7] = 0x01; |
| |
| priv->cck_txbbgain_table[21].ccktxbb_valuearray[0] = 0x10; |
| priv->cck_txbbgain_table[21].ccktxbb_valuearray[1] = 0x10; |
| priv->cck_txbbgain_table[21].ccktxbb_valuearray[2] = 0x0e; |
| priv->cck_txbbgain_table[21].ccktxbb_valuearray[3] = 0x0b; |
| priv->cck_txbbgain_table[21].ccktxbb_valuearray[4] = 0x08; |
| priv->cck_txbbgain_table[21].ccktxbb_valuearray[5] = 0x05; |
| priv->cck_txbbgain_table[21].ccktxbb_valuearray[6] = 0x03; |
| priv->cck_txbbgain_table[21].ccktxbb_valuearray[7] = 0x01; |
| |
| priv->cck_txbbgain_table[22].ccktxbb_valuearray[0] = 0x0f; |
| priv->cck_txbbgain_table[22].ccktxbb_valuearray[1] = 0x0f; |
| priv->cck_txbbgain_table[22].ccktxbb_valuearray[2] = 0x0d; |
| priv->cck_txbbgain_table[22].ccktxbb_valuearray[3] = 0x0b; |
| priv->cck_txbbgain_table[22].ccktxbb_valuearray[4] = 0x08; |
| priv->cck_txbbgain_table[22].ccktxbb_valuearray[5] = 0x05; |
| priv->cck_txbbgain_table[22].ccktxbb_valuearray[6] = 0x03; |
| priv->cck_txbbgain_table[22].ccktxbb_valuearray[7] = 0x01; |
| |
| //ccktxbb_valuearray[0] is 0xA22 [1] is 0xA24 ...[7] is 0xA29 |
| //This Table is for CH14 |
| priv->cck_txbbgain_ch14_table[0].ccktxbb_valuearray[0] = 0x36; |
| priv->cck_txbbgain_ch14_table[0].ccktxbb_valuearray[1] = 0x35; |
| priv->cck_txbbgain_ch14_table[0].ccktxbb_valuearray[2] = 0x2e; |
| priv->cck_txbbgain_ch14_table[0].ccktxbb_valuearray[3] = 0x1b; |
| priv->cck_txbbgain_ch14_table[0].ccktxbb_valuearray[4] = 0x00; |
| priv->cck_txbbgain_ch14_table[0].ccktxbb_valuearray[5] = 0x00; |
| priv->cck_txbbgain_ch14_table[0].ccktxbb_valuearray[6] = 0x00; |
| priv->cck_txbbgain_ch14_table[0].ccktxbb_valuearray[7] = 0x00; |
| |
| priv->cck_txbbgain_ch14_table[1].ccktxbb_valuearray[0] = 0x33; |
| priv->cck_txbbgain_ch14_table[1].ccktxbb_valuearray[1] = 0x32; |
| priv->cck_txbbgain_ch14_table[1].ccktxbb_valuearray[2] = 0x2b; |
| priv->cck_txbbgain_ch14_table[1].ccktxbb_valuearray[3] = 0x19; |
| priv->cck_txbbgain_ch14_table[1].ccktxbb_valuearray[4] = 0x00; |
| priv->cck_txbbgain_ch14_table[1].ccktxbb_valuearray[5] = 0x00; |
| priv->cck_txbbgain_ch14_table[1].ccktxbb_valuearray[6] = 0x00; |
| priv->cck_txbbgain_ch14_table[1].ccktxbb_valuearray[7] = 0x00; |
| |
| priv->cck_txbbgain_ch14_table[2].ccktxbb_valuearray[0] = 0x30; |
| priv->cck_txbbgain_ch14_table[2].ccktxbb_valuearray[1] = 0x2f; |
| priv->cck_txbbgain_ch14_table[2].ccktxbb_valuearray[2] = 0x29; |
| priv->cck_txbbgain_ch14_table[2].ccktxbb_valuearray[3] = 0x18; |
| priv->cck_txbbgain_ch14_table[2].ccktxbb_valuearray[4] = 0x00; |
| priv->cck_txbbgain_ch14_table[2].ccktxbb_valuearray[5] = 0x00; |
| priv->cck_txbbgain_ch14_table[2].ccktxbb_valuearray[6] = 0x00; |
| priv->cck_txbbgain_ch14_table[2].ccktxbb_valuearray[7] = 0x00; |
| |
| priv->cck_txbbgain_ch14_table[3].ccktxbb_valuearray[0] = 0x2d; |
| priv->cck_txbbgain_ch14_table[3].ccktxbb_valuearray[1] = 0x2d; |
| priv->cck_txbbgain_ch14_table[3].ccktxbb_valuearray[2] = 0x27; |
| priv->cck_txbbgain_ch14_table[3].ccktxbb_valuearray[3] = 0x17; |
| priv->cck_txbbgain_ch14_table[3].ccktxbb_valuearray[4] = 0x00; |
| priv->cck_txbbgain_ch14_table[3].ccktxbb_valuearray[5] = 0x00; |
| priv->cck_txbbgain_ch14_table[3].ccktxbb_valuearray[6] = 0x00; |
| priv->cck_txbbgain_ch14_table[3].ccktxbb_valuearray[7] = 0x00; |
| |
| priv->cck_txbbgain_ch14_table[4].ccktxbb_valuearray[0] = 0x2b; |
| priv->cck_txbbgain_ch14_table[4].ccktxbb_valuearray[1] = 0x2a; |
| priv->cck_txbbgain_ch14_table[4].ccktxbb_valuearray[2] = 0x25; |
| priv->cck_txbbgain_ch14_table[4].ccktxbb_valuearray[3] = 0x15; |
| priv->cck_txbbgain_ch14_table[4].ccktxbb_valuearray[4] = 0x00; |
| priv->cck_txbbgain_ch14_table[4].ccktxbb_valuearray[5] = 0x00; |
| priv->cck_txbbgain_ch14_table[4].ccktxbb_valuearray[6] = 0x00; |
| priv->cck_txbbgain_ch14_table[4].ccktxbb_valuearray[7] = 0x00; |
| |
| priv->cck_txbbgain_ch14_table[5].ccktxbb_valuearray[0] = 0x28; |
| priv->cck_txbbgain_ch14_table[5].ccktxbb_valuearray[1] = 0x28; |
| priv->cck_txbbgain_ch14_table[5].ccktxbb_valuearray[2] = 0x22; |
| priv->cck_txbbgain_ch14_table[5].ccktxbb_valuearray[3] = 0x14; |
| priv->cck_txbbgain_ch14_table[5].ccktxbb_valuearray[4] = 0x00; |
| priv->cck_txbbgain_ch14_table[5].ccktxbb_valuearray[5] = 0x00; |
| priv->cck_txbbgain_ch14_table[5].ccktxbb_valuearray[6] = 0x00; |
| priv->cck_txbbgain_ch14_table[5].ccktxbb_valuearray[7] = 0x00; |
| |
| priv->cck_txbbgain_ch14_table[6].ccktxbb_valuearray[0] = 0x26; |
| priv->cck_txbbgain_ch14_table[6].ccktxbb_valuearray[1] = 0x25; |
| priv->cck_txbbgain_ch14_table[6].ccktxbb_valuearray[2] = 0x21; |
| priv->cck_txbbgain_ch14_table[6].ccktxbb_valuearray[3] = 0x13; |
| priv->cck_txbbgain_ch14_table[6].ccktxbb_valuearray[4] = 0x00; |
| priv->cck_txbbgain_ch14_table[6].ccktxbb_valuearray[5] = 0x00; |
| priv->cck_txbbgain_ch14_table[6].ccktxbb_valuearray[6] = 0x00; |
| priv->cck_txbbgain_ch14_table[6].ccktxbb_valuearray[7] = 0x00; |
| |
| priv->cck_txbbgain_ch14_table[7].ccktxbb_valuearray[0] = 0x24; |
| priv->cck_txbbgain_ch14_table[7].ccktxbb_valuearray[1] = 0x23; |
| priv->cck_txbbgain_ch14_table[7].ccktxbb_valuearray[2] = 0x1f; |
| priv->cck_txbbgain_ch14_table[7].ccktxbb_valuearray[3] = 0x12; |
| priv->cck_txbbgain_ch14_table[7].ccktxbb_valuearray[4] = 0x00; |
| priv->cck_txbbgain_ch14_table[7].ccktxbb_valuearray[5] = 0x00; |
| priv->cck_txbbgain_ch14_table[7].ccktxbb_valuearray[6] = 0x00; |
| priv->cck_txbbgain_ch14_table[7].ccktxbb_valuearray[7] = 0x00; |
| |
| priv->cck_txbbgain_ch14_table[8].ccktxbb_valuearray[0] = 0x22; |
| priv->cck_txbbgain_ch14_table[8].ccktxbb_valuearray[1] = 0x21; |
| priv->cck_txbbgain_ch14_table[8].ccktxbb_valuearray[2] = 0x1d; |
| priv->cck_txbbgain_ch14_table[8].ccktxbb_valuearray[3] = 0x11; |
| priv->cck_txbbgain_ch14_table[8].ccktxbb_valuearray[4] = 0x00; |
| priv->cck_txbbgain_ch14_table[8].ccktxbb_valuearray[5] = 0x00; |
| priv->cck_txbbgain_ch14_table[8].ccktxbb_valuearray[6] = 0x00; |
| priv->cck_txbbgain_ch14_table[8].ccktxbb_valuearray[7] = 0x00; |
| |
| priv->cck_txbbgain_ch14_table[9].ccktxbb_valuearray[0] = 0x20; |
| priv->cck_txbbgain_ch14_table[9].ccktxbb_valuearray[1] = 0x20; |
| priv->cck_txbbgain_ch14_table[9].ccktxbb_valuearray[2] = 0x1b; |
| priv->cck_txbbgain_ch14_table[9].ccktxbb_valuearray[3] = 0x10; |
| priv->cck_txbbgain_ch14_table[9].ccktxbb_valuearray[4] = 0x00; |
| priv->cck_txbbgain_ch14_table[9].ccktxbb_valuearray[5] = 0x00; |
| priv->cck_txbbgain_ch14_table[9].ccktxbb_valuearray[6] = 0x00; |
| priv->cck_txbbgain_ch14_table[9].ccktxbb_valuearray[7] = 0x00; |
| |
| priv->cck_txbbgain_ch14_table[10].ccktxbb_valuearray[0] = 0x1f; |
| priv->cck_txbbgain_ch14_table[10].ccktxbb_valuearray[1] = 0x1e; |
| priv->cck_txbbgain_ch14_table[10].ccktxbb_valuearray[2] = 0x1a; |
| priv->cck_txbbgain_ch14_table[10].ccktxbb_valuearray[3] = 0x0f; |
| priv->cck_txbbgain_ch14_table[10].ccktxbb_valuearray[4] = 0x00; |
| priv->cck_txbbgain_ch14_table[10].ccktxbb_valuearray[5] = 0x00; |
| priv->cck_txbbgain_ch14_table[10].ccktxbb_valuearray[6] = 0x00; |
| priv->cck_txbbgain_ch14_table[10].ccktxbb_valuearray[7] = 0x00; |
| |
| priv->cck_txbbgain_ch14_table[11].ccktxbb_valuearray[0] = 0x1d; |
| priv->cck_txbbgain_ch14_table[11].ccktxbb_valuearray[1] = 0x1c; |
| priv->cck_txbbgain_ch14_table[11].ccktxbb_valuearray[2] = 0x18; |
| priv->cck_txbbgain_ch14_table[11].ccktxbb_valuearray[3] = 0x0e; |
| priv->cck_txbbgain_ch14_table[11].ccktxbb_valuearray[4] = 0x00; |
| priv->cck_txbbgain_ch14_table[11].ccktxbb_valuearray[5] = 0x00; |
| priv->cck_txbbgain_ch14_table[11].ccktxbb_valuearray[6] = 0x00; |
| priv->cck_txbbgain_ch14_table[11].ccktxbb_valuearray[7] = 0x00; |
| |
| priv->cck_txbbgain_ch14_table[12].ccktxbb_valuearray[0] = 0x1b; |
| priv->cck_txbbgain_ch14_table[12].ccktxbb_valuearray[1] = 0x1a; |
| priv->cck_txbbgain_ch14_table[12].ccktxbb_valuearray[2] = 0x17; |
| priv->cck_txbbgain_ch14_table[12].ccktxbb_valuearray[3] = 0x0e; |
| priv->cck_txbbgain_ch14_table[12].ccktxbb_valuearray[4] = 0x00; |
| priv->cck_txbbgain_ch14_table[12].ccktxbb_valuearray[5] = 0x00; |
| priv->cck_txbbgain_ch14_table[12].ccktxbb_valuearray[6] = 0x00; |
| priv->cck_txbbgain_ch14_table[12].ccktxbb_valuearray[7] = 0x00; |
| |
| priv->cck_txbbgain_ch14_table[13].ccktxbb_valuearray[0] = 0x1a; |
| priv->cck_txbbgain_ch14_table[13].ccktxbb_valuearray[1] = 0x19; |
| priv->cck_txbbgain_ch14_table[13].ccktxbb_valuearray[2] = 0x16; |
| priv->cck_txbbgain_ch14_table[13].ccktxbb_valuearray[3] = 0x0d; |
| priv->cck_txbbgain_ch14_table[13].ccktxbb_valuearray[4] = 0x00; |
| priv->cck_txbbgain_ch14_table[13].ccktxbb_valuearray[5] = 0x00; |
| priv->cck_txbbgain_ch14_table[13].ccktxbb_valuearray[6] = 0x00; |
| priv->cck_txbbgain_ch14_table[13].ccktxbb_valuearray[7] = 0x00; |
| |
| priv->cck_txbbgain_ch14_table[14].ccktxbb_valuearray[0] = 0x18; |
| priv->cck_txbbgain_ch14_table[14].ccktxbb_valuearray[1] = 0x17; |
| priv->cck_txbbgain_ch14_table[14].ccktxbb_valuearray[2] = 0x15; |
| priv->cck_txbbgain_ch14_table[14].ccktxbb_valuearray[3] = 0x0c; |
| priv->cck_txbbgain_ch14_table[14].ccktxbb_valuearray[4] = 0x00; |
| priv->cck_txbbgain_ch14_table[14].ccktxbb_valuearray[5] = 0x00; |
| priv->cck_txbbgain_ch14_table[14].ccktxbb_valuearray[6] = 0x00; |
| priv->cck_txbbgain_ch14_table[14].ccktxbb_valuearray[7] = 0x00; |
| |
| priv->cck_txbbgain_ch14_table[15].ccktxbb_valuearray[0] = 0x17; |
| priv->cck_txbbgain_ch14_table[15].ccktxbb_valuearray[1] = 0x16; |
| priv->cck_txbbgain_ch14_table[15].ccktxbb_valuearray[2] = 0x13; |
| priv->cck_txbbgain_ch14_table[15].ccktxbb_valuearray[3] = 0x0b; |
| priv->cck_txbbgain_ch14_table[15].ccktxbb_valuearray[4] = 0x00; |
| priv->cck_txbbgain_ch14_table[15].ccktxbb_valuearray[5] = 0x00; |
| priv->cck_txbbgain_ch14_table[15].ccktxbb_valuearray[6] = 0x00; |
| priv->cck_txbbgain_ch14_table[15].ccktxbb_valuearray[7] = 0x00; |
| |
| priv->cck_txbbgain_ch14_table[16].ccktxbb_valuearray[0] = 0x16; |
| priv->cck_txbbgain_ch14_table[16].ccktxbb_valuearray[1] = 0x15; |
| priv->cck_txbbgain_ch14_table[16].ccktxbb_valuearray[2] = 0x12; |
| priv->cck_txbbgain_ch14_table[16].ccktxbb_valuearray[3] = 0x0b; |
| priv->cck_txbbgain_ch14_table[16].ccktxbb_valuearray[4] = 0x00; |
| priv->cck_txbbgain_ch14_table[16].ccktxbb_valuearray[5] = 0x00; |
| priv->cck_txbbgain_ch14_table[16].ccktxbb_valuearray[6] = 0x00; |
| priv->cck_txbbgain_ch14_table[16].ccktxbb_valuearray[7] = 0x00; |
| |
| priv->cck_txbbgain_ch14_table[17].ccktxbb_valuearray[0] = 0x14; |
| priv->cck_txbbgain_ch14_table[17].ccktxbb_valuearray[1] = 0x14; |
| priv->cck_txbbgain_ch14_table[17].ccktxbb_valuearray[2] = 0x11; |
| priv->cck_txbbgain_ch14_table[17].ccktxbb_valuearray[3] = 0x0a; |
| priv->cck_txbbgain_ch14_table[17].ccktxbb_valuearray[4] = 0x00; |
| priv->cck_txbbgain_ch14_table[17].ccktxbb_valuearray[5] = 0x00; |
| priv->cck_txbbgain_ch14_table[17].ccktxbb_valuearray[6] = 0x00; |
| priv->cck_txbbgain_ch14_table[17].ccktxbb_valuearray[7] = 0x00; |
| |
| priv->cck_txbbgain_ch14_table[18].ccktxbb_valuearray[0] = 0x13; |
| priv->cck_txbbgain_ch14_table[18].ccktxbb_valuearray[1] = 0x13; |
| priv->cck_txbbgain_ch14_table[18].ccktxbb_valuearray[2] = 0x10; |
| priv->cck_txbbgain_ch14_table[18].ccktxbb_valuearray[3] = 0x0a; |
| priv->cck_txbbgain_ch14_table[18].ccktxbb_valuearray[4] = 0x00; |
| priv->cck_txbbgain_ch14_table[18].ccktxbb_valuearray[5] = 0x00; |
| priv->cck_txbbgain_ch14_table[18].ccktxbb_valuearray[6] = 0x00; |
| priv->cck_txbbgain_ch14_table[18].ccktxbb_valuearray[7] = 0x00; |
| |
| priv->cck_txbbgain_ch14_table[19].ccktxbb_valuearray[0] = 0x12; |
| priv->cck_txbbgain_ch14_table[19].ccktxbb_valuearray[1] = 0x12; |
| priv->cck_txbbgain_ch14_table[19].ccktxbb_valuearray[2] = 0x0f; |
| priv->cck_txbbgain_ch14_table[19].ccktxbb_valuearray[3] = 0x09; |
| priv->cck_txbbgain_ch14_table[19].ccktxbb_valuearray[4] = 0x00; |
| priv->cck_txbbgain_ch14_table[19].ccktxbb_valuearray[5] = 0x00; |
| priv->cck_txbbgain_ch14_table[19].ccktxbb_valuearray[6] = 0x00; |
| priv->cck_txbbgain_ch14_table[19].ccktxbb_valuearray[7] = 0x00; |
| |
| priv->cck_txbbgain_ch14_table[20].ccktxbb_valuearray[0] = 0x11; |
| priv->cck_txbbgain_ch14_table[20].ccktxbb_valuearray[1] = 0x11; |
| priv->cck_txbbgain_ch14_table[20].ccktxbb_valuearray[2] = 0x0f; |
| priv->cck_txbbgain_ch14_table[20].ccktxbb_valuearray[3] = 0x09; |
| priv->cck_txbbgain_ch14_table[20].ccktxbb_valuearray[4] = 0x00; |
| priv->cck_txbbgain_ch14_table[20].ccktxbb_valuearray[5] = 0x00; |
| priv->cck_txbbgain_ch14_table[20].ccktxbb_valuearray[6] = 0x00; |
| priv->cck_txbbgain_ch14_table[20].ccktxbb_valuearray[7] = 0x00; |
| |
| priv->cck_txbbgain_ch14_table[21].ccktxbb_valuearray[0] = 0x10; |
| priv->cck_txbbgain_ch14_table[21].ccktxbb_valuearray[1] = 0x10; |
| priv->cck_txbbgain_ch14_table[21].ccktxbb_valuearray[2] = 0x0e; |
| priv->cck_txbbgain_ch14_table[21].ccktxbb_valuearray[3] = 0x08; |
| priv->cck_txbbgain_ch14_table[21].ccktxbb_valuearray[4] = 0x00; |
| priv->cck_txbbgain_ch14_table[21].ccktxbb_valuearray[5] = 0x00; |
| priv->cck_txbbgain_ch14_table[21].ccktxbb_valuearray[6] = 0x00; |
| priv->cck_txbbgain_ch14_table[21].ccktxbb_valuearray[7] = 0x00; |
| |
| priv->cck_txbbgain_ch14_table[22].ccktxbb_valuearray[0] = 0x0f; |
| priv->cck_txbbgain_ch14_table[22].ccktxbb_valuearray[1] = 0x0f; |
| priv->cck_txbbgain_ch14_table[22].ccktxbb_valuearray[2] = 0x0d; |
| priv->cck_txbbgain_ch14_table[22].ccktxbb_valuearray[3] = 0x08; |
| priv->cck_txbbgain_ch14_table[22].ccktxbb_valuearray[4] = 0x00; |
| priv->cck_txbbgain_ch14_table[22].ccktxbb_valuearray[5] = 0x00; |
| priv->cck_txbbgain_ch14_table[22].ccktxbb_valuearray[6] = 0x00; |
| priv->cck_txbbgain_ch14_table[22].ccktxbb_valuearray[7] = 0x00; |
| |
| priv->btxpower_tracking = TRUE; |
| priv->txpower_count = 0; |
| priv->btxpower_trackingInit = FALSE; |
| |
| } |
| |
| static void dm_InitializeTXPowerTracking_ThermalMeter(struct net_device *dev) |
| { |
| struct r8192_priv *priv = ieee80211_priv(dev); |
| |
| // Tx Power tracking by Theremal Meter require Firmware R/W 3-wire. This mechanism |
| // can be enabled only when Firmware R/W 3-wire is enabled. Otherwise, frequent r/w |
| // 3-wire by driver cause RF goes into wrong state. |
| if(priv->ieee80211->FwRWRF) |
| priv->btxpower_tracking = TRUE; |
| else |
| priv->btxpower_tracking = FALSE; |
| priv->txpower_count = 0; |
| priv->btxpower_trackingInit = FALSE; |
| } |
| |
| |
| void dm_initialize_txpower_tracking(struct net_device *dev) |
| { |
| struct r8192_priv *priv = ieee80211_priv(dev); |
| #ifdef RTL8190P |
| dm_InitializeTXPowerTracking_TSSI(dev); |
| #else |
| if(priv->bDcut == TRUE) |
| dm_InitializeTXPowerTracking_TSSI(dev); |
| else |
| dm_InitializeTXPowerTracking_ThermalMeter(dev); |
| #endif |
| }// dm_InitializeTXPowerTracking |
| |
| |
| static void dm_CheckTXPowerTracking_TSSI(struct net_device *dev) |
| { |
| struct r8192_priv *priv = ieee80211_priv(dev); |
| static u32 tx_power_track_counter = 0; |
| |
| if(!priv->btxpower_tracking) |
| return; |
| else |
| { |
| if((tx_power_track_counter % 30 == 0)&&(tx_power_track_counter != 0)) |
| { |
| queue_delayed_work(priv->priv_wq,&priv->txpower_tracking_wq,0); |
| } |
| tx_power_track_counter++; |
| } |
| |
| } |
| |
| |
| static void dm_CheckTXPowerTracking_ThermalMeter(struct net_device *dev) |
| { |
| struct r8192_priv *priv = ieee80211_priv(dev); |
| static u8 TM_Trigger=0; |
| //DbgPrint("dm_CheckTXPowerTracking() \n"); |
| if(!priv->btxpower_tracking) |
| return; |
| else |
| { |
| if(priv->txpower_count <= 2) |
| { |
| priv->txpower_count++; |
| return; |
| } |
| } |
| |
| if(!TM_Trigger) |
| { |
| //Attention!! You have to wirte all 12bits data to RF, or it may cause RF to crash |
| //actually write reg0x02 bit1=0, then bit1=1. |
| //DbgPrint("Trigger ThermalMeter, write RF reg0x2 = 0x4d to 0x4f\n"); |
| rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bMask12Bits, 0x4d); |
| rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bMask12Bits, 0x4f); |
| rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bMask12Bits, 0x4d); |
| rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bMask12Bits, 0x4f); |
| TM_Trigger = 1; |
| return; |
| } |
| else |
| { |
| //DbgPrint("Schedule TxPowerTrackingWorkItem\n"); |
| queue_delayed_work(priv->priv_wq,&priv->txpower_tracking_wq,0); |
| TM_Trigger = 0; |
| } |
| } |
| |
| |
| static void dm_check_txpower_tracking(struct net_device *dev) |
| { |
| struct r8192_priv *priv = ieee80211_priv(dev); |
| //static u32 tx_power_track_counter = 0; |
| |
| #ifdef RTL8190P |
| dm_CheckTXPowerTracking_TSSI(dev); |
| #else |
| if(priv->bDcut == TRUE) |
| dm_CheckTXPowerTracking_TSSI(dev); |
| else |
| dm_CheckTXPowerTracking_ThermalMeter(dev); |
| #endif |
| |
| } // dm_CheckTXPowerTracking |
| |
| |
| static void dm_CCKTxPowerAdjust_TSSI(struct net_device *dev, bool bInCH14) |
| { |
| u32 TempVal; |
| struct r8192_priv *priv = ieee80211_priv(dev); |
| //Write 0xa22 0xa23 |
| TempVal = 0; |
| if(!bInCH14){ |
| //Write 0xa22 0xa23 |
| TempVal = priv->cck_txbbgain_table[priv->cck_present_attentuation].ccktxbb_valuearray[0] + |
| (priv->cck_txbbgain_table[priv->cck_present_attentuation].ccktxbb_valuearray[1]<<8) ; |
| |
| rtl8192_setBBreg(dev, rCCK0_TxFilter1,bMaskHWord, TempVal); |
| //Write 0xa24 ~ 0xa27 |
| TempVal = 0; |
| TempVal = priv->cck_txbbgain_table[priv->cck_present_attentuation].ccktxbb_valuearray[2] + |
| (priv->cck_txbbgain_table[priv->cck_present_attentuation].ccktxbb_valuearray[3]<<8) + |
| (priv->cck_txbbgain_table[priv->cck_present_attentuation].ccktxbb_valuearray[4]<<16 )+ |
| (priv->cck_txbbgain_table[priv->cck_present_attentuation].ccktxbb_valuearray[5]<<24); |
| rtl8192_setBBreg(dev, rCCK0_TxFilter2,bMaskDWord, TempVal); |
| //Write 0xa28 0xa29 |
| TempVal = 0; |
| TempVal = priv->cck_txbbgain_table[priv->cck_present_attentuation].ccktxbb_valuearray[6] + |
| (priv->cck_txbbgain_table[priv->cck_present_attentuation].ccktxbb_valuearray[7]<<8) ; |
| |
| rtl8192_setBBreg(dev, rCCK0_DebugPort,bMaskLWord, TempVal); |
| } |
| else |
| { |
| TempVal = priv->cck_txbbgain_ch14_table[priv->cck_present_attentuation].ccktxbb_valuearray[0] + |
| (priv->cck_txbbgain_ch14_table[priv->cck_present_attentuation].ccktxbb_valuearray[1]<<8) ; |
| |
| rtl8192_setBBreg(dev, rCCK0_TxFilter1,bMaskHWord, TempVal); |
| //Write 0xa24 ~ 0xa27 |
| TempVal = 0; |
| TempVal = priv->cck_txbbgain_ch14_table[priv->cck_present_attentuation].ccktxbb_valuearray[2] + |
| (priv->cck_txbbgain_ch14_table[priv->cck_present_attentuation].ccktxbb_valuearray[3]<<8) + |
| (priv->cck_txbbgain_ch14_table[priv->cck_present_attentuation].ccktxbb_valuearray[4]<<16 )+ |
| (priv->cck_txbbgain_ch14_table[priv->cck_present_attentuation].ccktxbb_valuearray[5]<<24); |
| rtl8192_setBBreg(dev, rCCK0_TxFilter2,bMaskDWord, TempVal); |
| //Write 0xa28 0xa29 |
| TempVal = 0; |
| TempVal = priv->cck_txbbgain_ch14_table[priv->cck_present_attentuation].ccktxbb_valuearray[6] + |
| (priv->cck_txbbgain_ch14_table[priv->cck_present_attentuation].ccktxbb_valuearray[7]<<8) ; |
| |
| rtl8192_setBBreg(dev, rCCK0_DebugPort,bMaskLWord, TempVal); |
| } |
| |
| |
| } |
| |
| static void dm_CCKTxPowerAdjust_ThermalMeter(struct net_device *dev, bool bInCH14) |
| { |
| u32 TempVal; |
| struct r8192_priv *priv = ieee80211_priv(dev); |
| |
| TempVal = 0; |
| if(!bInCH14) |
| { |
| //Write 0xa22 0xa23 |
| TempVal = CCKSwingTable_Ch1_Ch13[priv->CCK_index][0] + |
| (CCKSwingTable_Ch1_Ch13[priv->CCK_index][1]<<8) ; |
| rtl8192_setBBreg(dev, rCCK0_TxFilter1, bMaskHWord, TempVal); |
| RT_TRACE(COMP_POWER_TRACKING, "CCK not chnl 14, reg 0x%x = 0x%x\n", |
| rCCK0_TxFilter1, TempVal); |
| //Write 0xa24 ~ 0xa27 |
| TempVal = 0; |
| TempVal = CCKSwingTable_Ch1_Ch13[priv->CCK_index][2] + |
| (CCKSwingTable_Ch1_Ch13[priv->CCK_index][3]<<8) + |
| (CCKSwingTable_Ch1_Ch13[priv->CCK_index][4]<<16 )+ |
| (CCKSwingTable_Ch1_Ch13[priv->CCK_index][5]<<24); |
| rtl8192_setBBreg(dev, rCCK0_TxFilter2, bMaskDWord, TempVal); |
| RT_TRACE(COMP_POWER_TRACKING, "CCK not chnl 14, reg 0x%x = 0x%x\n", |
| rCCK0_TxFilter2, TempVal); |
| //Write 0xa28 0xa29 |
| TempVal = 0; |
| TempVal = CCKSwingTable_Ch1_Ch13[priv->CCK_index][6] + |
| (CCKSwingTable_Ch1_Ch13[priv->CCK_index][7]<<8) ; |
| |
| rtl8192_setBBreg(dev, rCCK0_DebugPort, bMaskLWord, TempVal); |
| RT_TRACE(COMP_POWER_TRACKING, "CCK not chnl 14, reg 0x%x = 0x%x\n", |
| rCCK0_DebugPort, TempVal); |
| } |
| else |
| { |
| // priv->CCKTxPowerAdjustCntNotCh14++; //cosa add for debug. |
| //Write 0xa22 0xa23 |
| TempVal = CCKSwingTable_Ch14[priv->CCK_index][0] + |
| (CCKSwingTable_Ch14[priv->CCK_index][1]<<8) ; |
| |
| rtl8192_setBBreg(dev, rCCK0_TxFilter1, bMaskHWord, TempVal); |
| RT_TRACE(COMP_POWER_TRACKING, "CCK chnl 14, reg 0x%x = 0x%x\n", |
| rCCK0_TxFilter1, TempVal); |
| //Write 0xa24 ~ 0xa27 |
| TempVal = 0; |
| TempVal = CCKSwingTable_Ch14[priv->CCK_index][2] + |
| (CCKSwingTable_Ch14[priv->CCK_index][3]<<8) + |
| (CCKSwingTable_Ch14[priv->CCK_index][4]<<16 )+ |
| (CCKSwingTable_Ch14[priv->CCK_index][5]<<24); |
| rtl8192_setBBreg(dev, rCCK0_TxFilter2, bMaskDWord, TempVal); |
| RT_TRACE(COMP_POWER_TRACKING, "CCK chnl 14, reg 0x%x = 0x%x\n", |
| rCCK0_TxFilter2, TempVal); |
| //Write 0xa28 0xa29 |
| TempVal = 0; |
| TempVal = CCKSwingTable_Ch14[priv->CCK_index][6] + |
| (CCKSwingTable_Ch14[priv->CCK_index][7]<<8) ; |
| |
| rtl8192_setBBreg(dev, rCCK0_DebugPort, bMaskLWord, TempVal); |
| RT_TRACE(COMP_POWER_TRACKING,"CCK chnl 14, reg 0x%x = 0x%x\n", |
| rCCK0_DebugPort, TempVal); |
| } |
| } |
| |
| |
| |
| extern void dm_cck_txpower_adjust( |
| struct net_device *dev, |
| bool binch14 |
| ) |
| { // dm_CCKTxPowerAdjust |
| |
| struct r8192_priv *priv = ieee80211_priv(dev); |
| #ifdef RTL8190P |
| dm_CCKTxPowerAdjust_TSSI(dev, binch14); |
| #else |
| if(priv->bDcut == TRUE) |
| dm_CCKTxPowerAdjust_TSSI(dev, binch14); |
| else |
| dm_CCKTxPowerAdjust_ThermalMeter(dev, binch14); |
| #endif |
| } |
| |
| |
| #ifndef RTL8192U |
| static void dm_txpower_reset_recovery( |
| struct net_device *dev |
| ) |
| { |
| struct r8192_priv *priv = ieee80211_priv(dev); |
| |
| RT_TRACE(COMP_POWER_TRACKING, "Start Reset Recovery ==>\n"); |
| rtl8192_setBBreg(dev, rOFDM0_XATxIQImbalance, bMaskDWord, priv->txbbgain_table[priv->rfa_txpowertrackingindex].txbbgain_value); |
| RT_TRACE(COMP_POWER_TRACKING, "Reset Recovery: Fill in 0xc80 is %08x\n",priv->txbbgain_table[priv->rfa_txpowertrackingindex].txbbgain_value); |
| RT_TRACE(COMP_POWER_TRACKING, "Reset Recovery: Fill in RFA_txPowerTrackingIndex is %x\n",priv->rfa_txpowertrackingindex); |
| RT_TRACE(COMP_POWER_TRACKING, "Reset Recovery : RF A I/Q Amplify Gain is %ld\n",priv->txbbgain_table[priv->rfa_txpowertrackingindex].txbb_iq_amplifygain); |
| RT_TRACE(COMP_POWER_TRACKING, "Reset Recovery: CCK Attenuation is %d dB\n",priv->cck_present_attentuation); |
| dm_cck_txpower_adjust(dev,priv->bcck_in_ch14); |
| |
| rtl8192_setBBreg(dev, rOFDM0_XCTxIQImbalance, bMaskDWord, priv->txbbgain_table[priv->rfc_txpowertrackingindex].txbbgain_value); |
| RT_TRACE(COMP_POWER_TRACKING, "Reset Recovery: Fill in 0xc90 is %08x\n",priv->txbbgain_table[priv->rfc_txpowertrackingindex].txbbgain_value); |
| RT_TRACE(COMP_POWER_TRACKING, "Reset Recovery: Fill in RFC_txPowerTrackingIndex is %x\n",priv->rfc_txpowertrackingindex); |
| RT_TRACE(COMP_POWER_TRACKING, "Reset Recovery : RF C I/Q Amplify Gain is %ld\n",priv->txbbgain_table[priv->rfc_txpowertrackingindex].txbb_iq_amplifygain); |
| |
| } // dm_TXPowerResetRecovery |
| |
| extern void dm_restore_dynamic_mechanism_state(struct net_device *dev) |
| { |
| struct r8192_priv *priv = ieee80211_priv(dev); |
| u32 reg_ratr = priv->rate_adaptive.last_ratr; |
| |
| if(!priv->up) |
| { |
| RT_TRACE(COMP_RATE, "<---- dm_restore_dynamic_mechanism_state(): driver is going to unload\n"); |
| return; |
| } |
| |
| // |
| // Restore previous state for rate adaptive |
| // |
| if(priv->rate_adaptive.rate_adaptive_disabled) |
| return; |
| // TODO: Only 11n mode is implemented currently, |
| if( !(priv->ieee80211->mode==WIRELESS_MODE_N_24G || |
| priv->ieee80211->mode==WIRELESS_MODE_N_5G)) |
| return; |
| { |
| /* 2007/11/15 MH Copy from 8190PCI. */ |
| u32 ratr_value; |
| ratr_value = reg_ratr; |
| if(priv->rf_type == RF_1T2R) // 1T2R, Spatial Stream 2 should be disabled |
| { |
| ratr_value &=~ (RATE_ALL_OFDM_2SS); |
| //DbgPrint("HW_VAR_TATR_0 from 0x%x ==> 0x%x\n", ((pu4Byte)(val))[0], ratr_value); |
| } |
| //DbgPrint("set HW_VAR_TATR_0 = 0x%x\n", ratr_value); |
| //cosa PlatformEFIOWrite4Byte(Adapter, RATR0, ((pu4Byte)(val))[0]); |
| write_nic_dword(dev, RATR0, ratr_value); |
| write_nic_byte(dev, UFWP, 1); |
| } |
| //Resore TX Power Tracking Index |
| if(priv->btxpower_trackingInit && priv->btxpower_tracking){ |
| dm_txpower_reset_recovery(dev); |
| } |
| |
| // |
| //Restore BB Initial Gain |
| // |
| dm_bb_initialgain_restore(dev); |
| |
| } // DM_RestoreDynamicMechanismState |
| |
| static void dm_bb_initialgain_restore(struct net_device *dev) |
| { |
| struct r8192_priv *priv = ieee80211_priv(dev); |
| u32 bit_mask = 0x7f; //Bit0~ Bit6 |
| |
| if(dm_digtable.dig_algorithm == DIG_ALGO_BY_RSSI) |
| return; |
| |
| //Disable Initial Gain |
| //PHY_SetBBReg(Adapter, UFWP, bMaskLWord, 0x800); |
| rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x8); // Only clear byte 1 and rewrite. |
| rtl8192_setBBreg(dev, rOFDM0_XAAGCCore1, bit_mask, (u32)priv->initgain_backup.xaagccore1); |
| rtl8192_setBBreg(dev, rOFDM0_XBAGCCore1, bit_mask, (u32)priv->initgain_backup.xbagccore1); |
| rtl8192_setBBreg(dev, rOFDM0_XCAGCCore1, bit_mask, (u32)priv->initgain_backup.xcagccore1); |
| rtl8192_setBBreg(dev, rOFDM0_XDAGCCore1, bit_mask, (u32)priv->initgain_backup.xdagccore1); |
| bit_mask = bMaskByte2; |
| rtl8192_setBBreg(dev, rCCK0_CCA, bit_mask, (u32)priv->initgain_backup.cca); |
| |
| RT_TRACE(COMP_DIG, "dm_BBInitialGainRestore 0xc50 is %x\n",priv->initgain_backup.xaagccore1); |
| RT_TRACE(COMP_DIG, "dm_BBInitialGainRestore 0xc58 is %x\n",priv->initgain_backup.xbagccore1); |
| RT_TRACE(COMP_DIG, "dm_BBInitialGainRestore 0xc60 is %x\n",priv->initgain_backup.xcagccore1); |
| RT_TRACE(COMP_DIG, "dm_BBInitialGainRestore 0xc68 is %x\n",priv->initgain_backup.xdagccore1); |
| RT_TRACE(COMP_DIG, "dm_BBInitialGainRestore 0xa0a is %x\n",priv->initgain_backup.cca); |
| //Enable Initial Gain |
| //PHY_SetBBReg(Adapter, UFWP, bMaskLWord, 0x100); |
| rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x1); // Only clear byte 1 and rewrite. |
| |
| } // dm_BBInitialGainRestore |
| |
| |
| extern void dm_backup_dynamic_mechanism_state(struct net_device *dev) |
| { |
| struct r8192_priv *priv = ieee80211_priv(dev); |
| |
| // Fsync to avoid reset |
| priv->bswitch_fsync = false; |
| priv->bfsync_processing = false; |
| //Backup BB InitialGain |
| dm_bb_initialgain_backup(dev); |
| |
| } // DM_BackupDynamicMechanismState |
| |
| |
| static void dm_bb_initialgain_backup(struct net_device *dev) |
| { |
| struct r8192_priv *priv = ieee80211_priv(dev); |
| u32 bit_mask = bMaskByte0; //Bit0~ Bit6 |
| |
| if(dm_digtable.dig_algorithm == DIG_ALGO_BY_RSSI) |
| return; |
| |
| //PHY_SetBBReg(Adapter, UFWP, bMaskLWord, 0x800); |
| rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x8); // Only clear byte 1 and rewrite. |
| priv->initgain_backup.xaagccore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XAAGCCore1, bit_mask); |
| priv->initgain_backup.xbagccore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XBAGCCore1, bit_mask); |
| priv->initgain_backup.xcagccore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XCAGCCore1, bit_mask); |
| priv->initgain_backup.xdagccore1 = (u8)rtl8192_QueryBBReg(dev, rOFDM0_XDAGCCore1, bit_mask); |
| bit_mask = bMaskByte2; |
| priv->initgain_backup.cca = (u8)rtl8192_QueryBBReg(dev, rCCK0_CCA, bit_mask); |
| |
| RT_TRACE(COMP_DIG, "BBInitialGainBackup 0xc50 is %x\n",priv->initgain_backup.xaagccore1); |
| RT_TRACE(COMP_DIG, "BBInitialGainBackup 0xc58 is %x\n",priv->initgain_backup.xbagccore1); |
| RT_TRACE(COMP_DIG, "BBInitialGainBackup 0xc60 is %x\n",priv->initgain_backup.xcagccore1); |
| RT_TRACE(COMP_DIG, "BBInitialGainBackup 0xc68 is %x\n",priv->initgain_backup.xdagccore1); |
| RT_TRACE(COMP_DIG, "BBInitialGainBackup 0xa0a is %x\n",priv->initgain_backup.cca); |
| |
| } // dm_BBInitialGainBakcup |
| |
| #endif |
| /*----------------------------------------------------------------------------- |
| * Function: dm_change_dynamic_initgain_thresh() |
| * |
| * Overview: |
| * |
| * Input: NONE |
| * |
| * Output: NONE |
| * |
| * Return: NONE |
| * |
| * Revised History: |
| * When Who Remark |
| * 05/29/2008 amy Create Version 0 porting from windows code. |
| * |
| *---------------------------------------------------------------------------*/ |
| extern void dm_change_dynamic_initgain_thresh(struct net_device *dev, |
| u32 dm_type, |
| u32 dm_value) |
| { |
| if (dm_type == DIG_TYPE_THRESH_HIGH) |
| { |
| dm_digtable.rssi_high_thresh = dm_value; |
| } |
| else if (dm_type == DIG_TYPE_THRESH_LOW) |
| { |
| dm_digtable.rssi_low_thresh = dm_value; |
| } |
| else if (dm_type == DIG_TYPE_THRESH_HIGHPWR_HIGH) |
| { |
| dm_digtable.rssi_high_power_highthresh = dm_value; |
| } |
| else if (dm_type == DIG_TYPE_THRESH_HIGHPWR_HIGH) |
| { |
| dm_digtable.rssi_high_power_highthresh = dm_value; |
| } |
| else if (dm_type == DIG_TYPE_ENABLE) |
| { |
| dm_digtable.dig_state = DM_STA_DIG_MAX; |
| dm_digtable.dig_enable_flag = true; |
| } |
| else if (dm_type == DIG_TYPE_DISABLE) |
| { |
| dm_digtable.dig_state = DM_STA_DIG_MAX; |
| dm_digtable.dig_enable_flag = false; |
| } |
| else if (dm_type == DIG_TYPE_DBG_MODE) |
| { |
| if(dm_value >= DM_DBG_MAX) |
| dm_value = DM_DBG_OFF; |
| dm_digtable.dbg_mode = (u8)dm_value; |
| } |
| else if (dm_type == DIG_TYPE_RSSI) |
| { |
| if(dm_value > 100) |
| dm_value = 30; |
| dm_digtable.rssi_val = (long)dm_value; |
| } |
| else if (dm_type == DIG_TYPE_ALGORITHM) |
| { |
| if (dm_value >= DIG_ALGO_MAX) |
| dm_value = DIG_ALGO_BY_FALSE_ALARM; |
| if(dm_digtable.dig_algorithm != (u8)dm_value) |
| dm_digtable.dig_algorithm_switch = 1; |
| dm_digtable.dig_algorithm = (u8)dm_value; |
| } |
| else if (dm_type == DIG_TYPE_BACKOFF) |
| { |
| if(dm_value > 30) |
| dm_value = 30; |
| dm_digtable.backoff_val = (u8)dm_value; |
| } |
| else if(dm_type == DIG_TYPE_RX_GAIN_MIN) |
| { |
| if(dm_value == 0) |
| dm_value = 0x1; |
| dm_digtable.rx_gain_range_min = (u8)dm_value; |
| } |
| else if(dm_type == DIG_TYPE_RX_GAIN_MAX) |
| { |
| if(dm_value > 0x50) |
| dm_value = 0x50; |
| dm_digtable.rx_gain_range_max = (u8)dm_value; |
| } |
| } /* DM_ChangeDynamicInitGainThresh */ |
| extern void |
| dm_change_fsync_setting( |
| struct net_device *dev, |
| s32 DM_Type, |
| s32 DM_Value) |
| { |
| struct r8192_priv *priv = ieee80211_priv(dev); |
| |
| if (DM_Type == 0) // monitor 0xc38 register |
| { |
| if(DM_Value > 1) |
| DM_Value = 1; |
| priv->framesyncMonitor = (u8)DM_Value; |
| //DbgPrint("pHalData->framesyncMonitor = %d", pHalData->framesyncMonitor); |
| } |
| } |
| |
| extern void |
| dm_change_rxpath_selection_setting( |
| struct net_device *dev, |
| s32 DM_Type, |
| s32 DM_Value) |
| { |
| struct r8192_priv *priv = ieee80211_priv(dev); |
| prate_adaptive pRA = (prate_adaptive)&(priv->rate_adaptive); |
| |
| |
| if(DM_Type == 0) |
| { |
| if(DM_Value > 1) |
| DM_Value = 1; |
| DM_RxPathSelTable.Enable = (u8)DM_Value; |
| } |
| else if(DM_Type == 1) |
| { |
| if(DM_Value > 1) |
| DM_Value = 1; |
| DM_RxPathSelTable.DbgMode = (u8)DM_Value; |
| } |
| else if(DM_Type == 2) |
| { |
| if(DM_Value > 40) |
| DM_Value = 40; |
| DM_RxPathSelTable.SS_TH_low = (u8)DM_Value; |
| } |
| else if(DM_Type == 3) |
| { |
| if(DM_Value > 25) |
| DM_Value = 25; |
| DM_RxPathSelTable.diff_TH = (u8)DM_Value; |
| } |
| else if(DM_Type == 4) |
| { |
| if(DM_Value >= CCK_Rx_Version_MAX) |
| DM_Value = CCK_Rx_Version_1; |
| DM_RxPathSelTable.cck_method= (u8)DM_Value; |
| } |
| else if(DM_Type == 10) |
| { |
| if(DM_Value > 100) |
| DM_Value = 50; |
| DM_RxPathSelTable.rf_rssi[0] = (u8)DM_Value; |
| } |
| else if(DM_Type == 11) |
| { |
| if(DM_Value > 100) |
| DM_Value = 50; |
| DM_RxPathSelTable.rf_rssi[1] = (u8)DM_Value; |
| } |
| else if(DM_Type == 12) |
| { |
| if(DM_Value > 100) |
| DM_Value = 50; |
| DM_RxPathSelTable.rf_rssi[2] = (u8)DM_Value; |
| } |
| else if(DM_Type == 13) |
| { |
| if(DM_Value > 100) |
| DM_Value = 50; |
| DM_RxPathSelTable.rf_rssi[3] = (u8)DM_Value; |
| } |
| else if(DM_Type == 20) |
| { |
| if(DM_Value > 1) |
| DM_Value = 1; |
| pRA->ping_rssi_enable = (u8)DM_Value; |
| } |
| else if(DM_Type == 21) |
| { |
| if(DM_Value > 30) |
| DM_Value = 30; |
| pRA->ping_rssi_thresh_for_ra = DM_Value; |
| } |
| } |
| |
| |
| /*----------------------------------------------------------------------------- |
| * Function: dm_dig_init() |
| * |
| * Overview: Set DIG scheme init value. |
| * |
| * Input: NONE |
| * |
| * Output: NONE |
| * |
| * Return: NONE |
| * |
| * Revised History: |
| * When Who Remark |
| * 05/15/2008 amy Create Version 0 porting from windows code. |
| * |
| *---------------------------------------------------------------------------*/ |
| static void dm_dig_init(struct net_device *dev) |
| { |
| struct r8192_priv *priv = ieee80211_priv(dev); |
| /* 2007/10/05 MH Disable DIG scheme now. Not tested. */ |
| dm_digtable.dig_enable_flag = true; |
| dm_digtable.dig_algorithm = DIG_ALGO_BY_RSSI; |
| dm_digtable.dbg_mode = DM_DBG_OFF; //off=by real rssi value, on=by DM_DigTable.Rssi_val for new dig |
| dm_digtable.dig_algorithm_switch = 0; |
| |
| /* 2007/10/04 MH Define init gain threshol. */ |
| dm_digtable.dig_state = DM_STA_DIG_MAX; |
| dm_digtable.dig_highpwr_state = DM_STA_DIG_MAX; |
| dm_digtable.initialgain_lowerbound_state = false; |
| |
| dm_digtable.rssi_low_thresh = DM_DIG_THRESH_LOW; |
| dm_digtable.rssi_high_thresh = DM_DIG_THRESH_HIGH; |
| |
| dm_digtable.rssi_high_power_lowthresh = DM_DIG_HIGH_PWR_THRESH_LOW; |
| dm_digtable.rssi_high_power_highthresh = DM_DIG_HIGH_PWR_THRESH_HIGH; |
| |
| dm_digtable.rssi_val = 50; //for new dig debug rssi value |
| dm_digtable.backoff_val = DM_DIG_BACKOFF; |
| dm_digtable.rx_gain_range_max = DM_DIG_MAX; |
| if(priv->CustomerID == RT_CID_819x_Netcore) |
| dm_digtable.rx_gain_range_min = DM_DIG_MIN_Netcore; |
| else |
| dm_digtable.rx_gain_range_min = DM_DIG_MIN; |
| |
| } /* dm_dig_init */ |
| |
| |
| /*----------------------------------------------------------------------------- |
| * Function: dm_ctrl_initgain_byrssi() |
| * |
| * Overview: Driver must monitor RSSI and notify firmware to change initial |
| * gain according to different threshold. BB team provide the |
| * suggested solution. |
| * |
| * Input: struct net_device *dev |
| * |
| * Output: NONE |
| * |
| * Return: NONE |
| * |
| * Revised History: |
| * When Who Remark |
| * 05/27/2008 amy Create Version 0 porting from windows code. |
| *---------------------------------------------------------------------------*/ |
| static void dm_ctrl_initgain_byrssi(struct net_device *dev) |
| { |
| |
| if (dm_digtable.dig_enable_flag == false) |
| return; |
| |
| if(dm_digtable.dig_algorithm == DIG_ALGO_BY_FALSE_ALARM) |
| dm_ctrl_initgain_byrssi_by_fwfalse_alarm(dev); |
| else if(dm_digtable.dig_algorithm == DIG_ALGO_BY_RSSI) |
| dm_ctrl_initgain_byrssi_by_driverrssi(dev); |
| // ; |
| else |
| return; |
| } |
| |
| |
| static void dm_ctrl_initgain_byrssi_by_driverrssi( |
| struct net_device *dev) |
| { |
| struct r8192_priv *priv = ieee80211_priv(dev); |
| u8 i; |
| static u8 fw_dig=0; |
| |
| if (dm_digtable.dig_enable_flag == false) |
| return; |
| |
| //DbgPrint("Dig by Sw Rssi \n"); |
| if(dm_digtable.dig_algorithm_switch) // if swithed algorithm, we have to disable FW Dig. |
| fw_dig = 0; |
| if(fw_dig <= 3) // execute several times to make sure the FW Dig is disabled |
| {// FW DIG Off |
| for(i=0; i<3; i++) |
| rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x8); // Only clear byte 1 and rewrite. |
| fw_dig++; |
| dm_digtable.dig_state = DM_STA_DIG_OFF; //fw dig off. |
| } |
| |
| if(priv->ieee80211->state == IEEE80211_LINKED) |
| dm_digtable.cur_connect_state = DIG_CONNECT; |
| else |
| dm_digtable.cur_connect_state = DIG_DISCONNECT; |
| |
| //DbgPrint("DM_DigTable.PreConnectState = %d, DM_DigTable.CurConnectState = %d \n", |
| //DM_DigTable.PreConnectState, DM_DigTable.CurConnectState); |
| |
| if(dm_digtable.dbg_mode == DM_DBG_OFF) |
| dm_digtable.rssi_val = priv->undecorated_smoothed_pwdb; |
| //DbgPrint("DM_DigTable.Rssi_val = %d \n", DM_DigTable.Rssi_val); |
| dm_initial_gain(dev); |
| dm_pd_th(dev); |
| dm_cs_ratio(dev); |
| if(dm_digtable.dig_algorithm_switch) |
| dm_digtable.dig_algorithm_switch = 0; |
| dm_digtable.pre_connect_state = dm_digtable.cur_connect_state; |
| |
| } /* dm_CtrlInitGainByRssi */ |
| |
| static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm( |
| struct net_device *dev) |
| { |
| struct r8192_priv *priv = ieee80211_priv(dev); |
| static u32 reset_cnt = 0; |
| u8 i; |
| |
| if (dm_digtable.dig_enable_flag == false) |
| return; |
| |
| if(dm_digtable.dig_algorithm_switch) |
| { |
| dm_digtable.dig_state = DM_STA_DIG_MAX; |
| // Fw DIG On. |
| for(i=0; i<3; i++) |
| rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x1); // Only clear byte 1 and rewrite. |
| dm_digtable.dig_algorithm_switch = 0; |
| } |
| |
| if (priv->ieee80211->state != IEEE80211_LINKED) |
| return; |
| |
| // For smooth, we can not change DIG state. |
| if ((priv->undecorated_smoothed_pwdb > dm_digtable.rssi_low_thresh) && |
| (priv->undecorated_smoothed_pwdb < dm_digtable.rssi_high_thresh)) |
| { |
| return; |
| } |
| //DbgPrint("Dig by Fw False Alarm\n"); |
| //if (DM_DigTable.Dig_State == DM_STA_DIG_OFF) |
| /*DbgPrint("DIG Check\n\r RSSI=%d LOW=%d HIGH=%d STATE=%d", |
| pHalData->UndecoratedSmoothedPWDB, DM_DigTable.RssiLowThresh, |
| DM_DigTable.RssiHighThresh, DM_DigTable.Dig_State);*/ |
| /* 1. When RSSI decrease, We have to judge if it is smaller than a treshold |
| and then execute below step. */ |
| if ((priv->undecorated_smoothed_pwdb <= dm_digtable.rssi_low_thresh)) |
| { |
| /* 2008/02/05 MH When we execute silent reset, the DIG PHY parameters |
| will be reset to init value. We must prevent the condition. */ |
| if (dm_digtable.dig_state == DM_STA_DIG_OFF && |
| (priv->reset_count == reset_cnt)) |
| { |
| return; |
| } |
| else |
| { |
| reset_cnt = priv->reset_count; |
| } |
| |
| // If DIG is off, DIG high power state must reset. |
| dm_digtable.dig_highpwr_state = DM_STA_DIG_MAX; |
| dm_digtable.dig_state = DM_STA_DIG_OFF; |
| |
| // 1.1 DIG Off. |
| rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x8); // Only clear byte 1 and rewrite. |
| |
| // 1.2 Set initial gain. |
| write_nic_byte(dev, rOFDM0_XAAGCCore1, 0x17); |
| write_nic_byte(dev, rOFDM0_XBAGCCore1, 0x17); |
| write_nic_byte(dev, rOFDM0_XCAGCCore1, 0x17); |
| write_nic_byte(dev, rOFDM0_XDAGCCore1, 0x17); |
| |
| // 1.3 Lower PD_TH for OFDM. |
| if (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20) |
| { |
| /* 2008/01/11 MH 40MHZ 90/92 register are not the same. */ |
| // 2008/02/05 MH SD3-Jerry 92U/92E PD_TH are the same. |
| #ifdef RTL8190P |
| write_nic_byte(dev, rOFDM0_RxDetector1, 0x40); |
| #else |
| write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x00); |
| #endif |
| /*else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P) |
| write_nic_byte(pAdapter, rOFDM0_RxDetector1, 0x40); |
| */ |
| //else if (pAdapter->HardwareType == HARDWARE_TYPE_RTL8192E) |
| |
| |
| //else |
| //PlatformEFIOWrite1Byte(pAdapter, rOFDM0_RxDetector1, 0x40); |
| } |
| else |
| write_nic_byte(dev, rOFDM0_RxDetector1, 0x42); |
| |
| // 1.4 Lower CS ratio for CCK. |
| write_nic_byte(dev, 0xa0a, 0x08); |
| |
| // 1.5 Higher EDCCA. |
| //PlatformEFIOWrite4Byte(pAdapter, rOFDM0_ECCAThreshold, 0x325); |
| return; |
| |
| } |
| |
| /* 2. When RSSI increase, We have to judge if it is larger than a treshold |
| and then execute below step. */ |
| if ((priv->undecorated_smoothed_pwdb >= dm_digtable.rssi_high_thresh) ) |
| { |
| u8 reset_flag = 0; |
| |
| if (dm_digtable.dig_state == DM_STA_DIG_ON && |
| (priv->reset_count == reset_cnt)) |
| { |
| dm_ctrl_initgain_byrssi_highpwr(dev); |
| return; |
| } |
| else |
| { |
| if (priv->reset_count != reset_cnt) |
| reset_flag = 1; |
| |
| reset_cnt = priv->reset_count; |
| } |
| |
| dm_digtable.dig_state = DM_STA_DIG_ON; |
| //DbgPrint("DIG ON\n\r"); |
| |
| // 2.1 Set initial gain. |
| // 2008/02/26 MH SD3-Jerry suggest to prevent dirty environment. |
| if (reset_flag == 1) |
| { |
| write_nic_byte(dev, rOFDM0_XAAGCCore1, 0x2c); |
| write_nic_byte(dev, rOFDM0_XBAGCCore1, 0x2c); |
| write_nic_byte(dev, rOFDM0_XCAGCCore1, 0x2c); |
| write_nic_byte(dev, rOFDM0_XDAGCCore1, 0x2c); |
| } |
| else |
| { |
| write_nic_byte(dev, rOFDM0_XAAGCCore1, 0x20); |
| write_nic_byte(dev, rOFDM0_XBAGCCore1, 0x20); |
| write_nic_byte(dev, rOFDM0_XCAGCCore1, 0x20); |
| write_nic_byte(dev, rOFDM0_XDAGCCore1, 0x20); |
| } |
| |
| // 2.2 Higher PD_TH for OFDM. |
| if (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20) |
| { |
| /* 2008/01/11 MH 40MHZ 90/92 register are not the same. */ |
| // 2008/02/05 MH SD3-Jerry 92U/92E PD_TH are the same. |
| #ifdef RTL8190P |
| write_nic_byte(dev, rOFDM0_RxDetector1, 0x42); |
| #else |
| write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x20); |
| #endif |
| /* |
| else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P) |
| write_nic_byte(dev, rOFDM0_RxDetector1, 0x42); |
| */ |
| //else if (pAdapter->HardwareType == HARDWARE_TYPE_RTL8192E) |
| |
| //else |
| //PlatformEFIOWrite1Byte(pAdapter, rOFDM0_RxDetector1, 0x42); |
| } |
| else |
| write_nic_byte(dev, rOFDM0_RxDetector1, 0x44); |
| |
| // 2.3 Higher CS ratio for CCK. |
| write_nic_byte(dev, 0xa0a, 0xcd); |
| |
| // 2.4 Lower EDCCA. |
| /* 2008/01/11 MH 90/92 series are the same. */ |
| //PlatformEFIOWrite4Byte(pAdapter, rOFDM0_ECCAThreshold, 0x346); |
| |
| // 2.5 DIG On. |
| rtl8192_setBBreg(dev, UFWP, bMaskByte1, 0x1); // Only clear byte 1 and rewrite. |
| |
| } |
| |
| dm_ctrl_initgain_byrssi_highpwr(dev); |
| |
| } /* dm_CtrlInitGainByRssi */ |
| |
| |
| /*----------------------------------------------------------------------------- |
| * Function: dm_ctrl_initgain_byrssi_highpwr() |
| * |
| * Overview: |
| * |
| * Input: NONE |
| * |
| * Output: NONE |
| * |
| * Return: NONE |
| * |
| * Revised History: |
| * When Who Remark |
| * 05/28/2008 amy Create Version 0 porting from windows code. |
| * |
| *---------------------------------------------------------------------------*/ |
| static void dm_ctrl_initgain_byrssi_highpwr( |
| struct net_device * dev) |
| { |
| struct r8192_priv *priv = ieee80211_priv(dev); |
| static u32 reset_cnt_highpwr = 0; |
| |
| // For smooth, we can not change high power DIG state in the range. |
| if ((priv->undecorated_smoothed_pwdb > dm_digtable.rssi_high_power_lowthresh) && |
| (priv->undecorated_smoothed_pwdb < dm_digtable.rssi_high_power_highthresh)) |
| { |
| return; |
| } |
| |
| /* 3. When RSSI >75% or <70%, it is a high power issue. We have to judge if |
| it is larger than a treshold and then execute below step. */ |
| // 2008/02/05 MH SD3-Jerry Modify PD_TH for high power issue. |
| if (priv->undecorated_smoothed_pwdb >= dm_digtable.rssi_high_power_highthresh) |
| { |
| if (dm_digtable.dig_highpwr_state == DM_STA_DIG_ON && |
| (priv->reset_count == reset_cnt_highpwr)) |
| return; |
| else |
| dm_digtable.dig_highpwr_state = DM_STA_DIG_ON; |
| |
| // 3.1 Higher PD_TH for OFDM for high power state. |
| if (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20) |
| { |
| #ifdef RTL8190P |
| write_nic_byte(dev, rOFDM0_RxDetector1, 0x41); |
| #else |
| write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x10); |
| #endif |
| |
| /*else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P) |
| write_nic_byte(dev, rOFDM0_RxDetector1, 0x41); |
| */ |
| |
| } |
| else |
| write_nic_byte(dev, rOFDM0_RxDetector1, 0x43); |
| } |
| else |
| { |
| if (dm_digtable.dig_highpwr_state == DM_STA_DIG_OFF&& |
| (priv->reset_count == reset_cnt_highpwr)) |
| return; |
| else |
| dm_digtable.dig_highpwr_state = DM_STA_DIG_OFF; |
| |
| if (priv->undecorated_smoothed_pwdb < dm_digtable.rssi_high_power_lowthresh && |
| priv->undecorated_smoothed_pwdb >= dm_digtable.rssi_high_thresh) |
| { |
| // 3.2 Recover PD_TH for OFDM for normal power region. |
| if (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20) |
| { |
| #ifdef RTL8190P |
| write_nic_byte(dev, rOFDM0_RxDetector1, 0x42); |
| #else |
| write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x20); |
| #endif |
| /*else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P) |
| write_nic_byte(dev, rOFDM0_RxDetector1, 0x42); |
| */ |
| |
| } |
| else |
| write_nic_byte(dev, rOFDM0_RxDetector1, 0x44); |
| } |
| } |
| |
| reset_cnt_highpwr = priv->reset_count; |
| |
| } /* dm_CtrlInitGainByRssiHighPwr */ |
| |
| |
| static void dm_initial_gain( |
| struct net_device * dev) |
| { |
| struct r8192_priv *priv = ieee80211_priv(dev); |
| u8 initial_gain=0; |
| static u8 initialized=0, force_write=0; |
| static u32 reset_cnt=0; |
| |
| if(dm_digtable.dig_algorithm_switch) |
| { |
| initialized = 0; |
| reset_cnt = 0; |
| } |
| |
| if(dm_digtable.pre_connect_state == dm_digtable.cur_connect_state) |
| { |
| if(dm_digtable.cur_connect_state == DIG_CONNECT) |
| { |
| if((dm_digtable.rssi_val+10-dm_digtable.backoff_val) > dm_digtable.rx_gain_range_max) |
| dm_digtable.cur_ig_value = dm_digtable.rx_gain_range_max; |
| else if((dm_digtable.rssi_val+10-dm_digtable.backoff_val) < dm_digtable.rx_gain_range_min) |
| dm_digtable.cur_ig_value = dm_digtable.rx_gain_range_min; |
| else |
| dm_digtable.cur_ig_value = dm_digtable.rssi_val+10-dm_digtable.backoff_val; |
| } |
| else //current state is disconnected |
| { |
| if(dm_digtable.cur_ig_value == 0) |
| dm_digtable.cur_ig_value = priv->DefaultInitialGain[0]; |
| else |
| dm_digtable.cur_ig_value = dm_digtable.pre_ig_value; |
| } |
| } |
| else // disconnected -> connected or connected -> disconnected |
| { |
| dm_digtable.cur_ig_value = priv->DefaultInitialGain[0]; |
| dm_digtable.pre_ig_value = 0; |
| } |
| //DbgPrint("DM_DigTable.CurIGValue = 0x%x, DM_DigTable.PreIGValue = 0x%x\n", DM_DigTable.CurIGValue, DM_DigTable.PreIGValue); |
| |
| // if silent reset happened, we should rewrite the values back |
| if(priv->reset_count != reset_cnt) |
| { |
| force_write = 1; |
| reset_cnt = priv->reset_count; |
| } |
| |
| if(dm_digtable.pre_ig_value != read_nic_byte(dev, rOFDM0_XAAGCCore1)) |
| force_write = 1; |
| |
| { |
| if((dm_digtable.pre_ig_value != dm_digtable.cur_ig_value) |
| || !initialized || force_write) |
| { |
| initial_gain = (u8)dm_digtable.cur_ig_value; |
| //DbgPrint("Write initial gain = 0x%x\n", initial_gain); |
| // Set initial gain. |
| write_nic_byte(dev, rOFDM0_XAAGCCore1, initial_gain); |
| write_nic_byte(dev, rOFDM0_XBAGCCore1, initial_gain); |
| write_nic_byte(dev, rOFDM0_XCAGCCore1, initial_gain); |
| write_nic_byte(dev, rOFDM0_XDAGCCore1, initial_gain); |
| dm_digtable.pre_ig_value = dm_digtable.cur_ig_value; |
| initialized = 1; |
| force_write = 0; |
| } |
| } |
| } |
| |
| static void dm_pd_th( |
| struct net_device * dev) |
| { |
| struct r8192_priv *priv = ieee80211_priv(dev); |
| static u8 initialized=0, force_write=0; |
| static u32 reset_cnt = 0; |
| |
| if(dm_digtable.dig_algorithm_switch) |
| { |
| initialized = 0; |
| reset_cnt = 0; |
| } |
| |
| if(dm_digtable.pre_connect_state == dm_digtable.cur_connect_state) |
| { |
| if(dm_digtable.cur_connect_state == DIG_CONNECT) |
| { |
| if (dm_digtable.rssi_val >= dm_digtable.rssi_high_power_highthresh) |
| dm_digtable.curpd_thstate = DIG_PD_AT_HIGH_POWER; |
| else if ((dm_digtable.rssi_val <= dm_digtable.rssi_low_thresh)) |
| dm_digtable.curpd_thstate = DIG_PD_AT_LOW_POWER; |
| else if ((dm_digtable.rssi_val >= dm_digtable.rssi_high_thresh) && |
| (dm_digtable.rssi_val < dm_digtable.rssi_high_power_lowthresh)) |
| dm_digtable.curpd_thstate = DIG_PD_AT_NORMAL_POWER; |
| else |
| dm_digtable.curpd_thstate = dm_digtable.prepd_thstate; |
| } |
| else |
| { |
| dm_digtable.curpd_thstate = DIG_PD_AT_LOW_POWER; |
| } |
| } |
| else // disconnected -> connected or connected -> disconnected |
| { |
| dm_digtable.curpd_thstate = DIG_PD_AT_LOW_POWER; |
| } |
| |
| // if silent reset happened, we should rewrite the values back |
| if(priv->reset_count != reset_cnt) |
| { |
| force_write = 1; |
| reset_cnt = priv->reset_count; |
| } |
| |
| { |
| if((dm_digtable.prepd_thstate != dm_digtable.curpd_thstate) || |
| (initialized<=3) || force_write) |
| { |
| //DbgPrint("Write PD_TH state = %d\n", DM_DigTable.CurPD_THState); |
| if(dm_digtable.curpd_thstate == DIG_PD_AT_LOW_POWER) |
| { |
| // Lower PD_TH for OFDM. |
| if (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20) |
| { |
| /* 2008/01/11 MH 40MHZ 90/92 register are not the same. */ |
| // 2008/02/05 MH SD3-Jerry 92U/92E PD_TH are the same. |
| #ifdef RTL8190P |
| write_nic_byte(dev, rOFDM0_RxDetector1, 0x40); |
| #else |
| write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x00); |
| #endif |
| /*else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P) |
| write_nic_byte(dev, rOFDM0_RxDetector1, 0x40); |
| */ |
| } |
| else |
| write_nic_byte(dev, rOFDM0_RxDetector1, 0x42); |
| } |
| else if(dm_digtable.curpd_thstate == DIG_PD_AT_NORMAL_POWER) |
| { |
| // Higher PD_TH for OFDM. |
| if (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20) |
| { |
| /* 2008/01/11 MH 40MHZ 90/92 register are not the same. */ |
| // 2008/02/05 MH SD3-Jerry 92U/92E PD_TH are the same. |
| #ifdef RTL8190P |
| write_nic_byte(dev, rOFDM0_RxDetector1, 0x42); |
| #else |
| write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x20); |
| #endif |
| /*else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P) |
| write_nic_byte(dev, rOFDM0_RxDetector1, 0x42); |
| */ |
| } |
| else |
| write_nic_byte(dev, rOFDM0_RxDetector1, 0x44); |
| } |
| else if(dm_digtable.curpd_thstate == DIG_PD_AT_HIGH_POWER) |
| { |
| // Higher PD_TH for OFDM for high power state. |
| if (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20) |
| { |
| #ifdef RTL8190P |
| write_nic_byte(dev, rOFDM0_RxDetector1, 0x41); |
| #else |
| write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x10); |
| #endif |
| /*else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P) |
| write_nic_byte(dev, rOFDM0_RxDetector1, 0x41); |
| */ |
| } |
| else |
| write_nic_byte(dev, rOFDM0_RxDetector1, 0x43); |
| } |
| dm_digtable.prepd_thstate = dm_digtable.curpd_thstate; |
| if(initialized <= 3) |
| initialized++; |
| force_write = 0; |
| } |
| } |
| } |
| |
| static void dm_cs_ratio( |
| struct net_device * dev) |
| { |
| struct r8192_priv *priv = ieee80211_priv(dev); |
| static u8 initialized=0,force_write=0; |
| static u32 reset_cnt = 0; |
| |
| if(dm_digtable.dig_algorithm_switch) |
| { |
| initialized = 0; |
| reset_cnt = 0; |
| } |
| |
| if(dm_digtable.pre_connect_state == dm_digtable.cur_connect_state) |
| { |
| if(dm_digtable.cur_connect_state == DIG_CONNECT) |
| { |
| if ((dm_digtable.rssi_val <= dm_digtable.rssi_low_thresh)) |
| dm_digtable.curcs_ratio_state = DIG_CS_RATIO_LOWER; |
| else if ((dm_digtable.rssi_val >= dm_digtable.rssi_high_thresh) ) |
| dm_digtable.curcs_ratio_state = DIG_CS_RATIO_HIGHER; |
| else |
| dm_digtable.curcs_ratio_state = dm_digtable.precs_ratio_state; |
| } |
| else |
| { |
| dm_digtable.curcs_ratio_state = DIG_CS_RATIO_LOWER; |
| } |
| } |
| else // disconnected -> connected or connected -> disconnected |
| { |
| dm_digtable.curcs_ratio_state = DIG_CS_RATIO_LOWER; |
| } |
| |
| // if silent reset happened, we should rewrite the values back |
| if(priv->reset_count != reset_cnt) |
| { |
| force_write = 1; |
| reset_cnt = priv->reset_count; |
| } |
| |
| |
| { |
| if((dm_digtable.precs_ratio_state != dm_digtable.curcs_ratio_state) || |
| !initialized || force_write) |
| { |
| //DbgPrint("Write CS_ratio state = %d\n", DM_DigTable.CurCS_ratioState); |
| if(dm_digtable.curcs_ratio_state == DIG_CS_RATIO_LOWER) |
| { |
| // Lower CS ratio for CCK. |
| write_nic_byte(dev, 0xa0a, 0x08); |
| } |
| else if(dm_digtable.curcs_ratio_state == DIG_CS_RATIO_HIGHER) |
| { |
| // Higher CS ratio for CCK. |
| write_nic_byte(dev, 0xa0a, 0xcd); |
| } |
| dm_digtable.precs_ratio_state = dm_digtable.curcs_ratio_state; |
| initialized = 1; |
| force_write = 0; |
| } |
| } |
| } |
| |
| extern void dm_init_edca_turbo(struct net_device * dev) |
| { |
| struct r8192_priv *priv = ieee80211_priv(dev); |
| |
| priv->bcurrent_turbo_EDCA = false; |
| priv->ieee80211->bis_any_nonbepkts = false; |
| priv->bis_cur_rdlstate = false; |
| } // dm_init_edca_turbo |
| |
| static void dm_check_edca_turbo( |
| struct net_device * dev) |
| { |
| struct r8192_priv *priv = ieee80211_priv(dev); |
| PRT_HIGH_THROUGHPUT pHTInfo = priv->ieee80211->pHTInfo; |
| //PSTA_QOS pStaQos = pMgntInfo->pStaQos; |
| |
| // Keep past Tx/Rx packet count for RT-to-RT EDCA turbo. |
| static unsigned long lastTxOkCnt = 0; |
| static unsigned long lastRxOkCnt = 0; |
| unsigned long curTxOkCnt = 0; |
| unsigned long curRxOkCnt = 0; |
| |
| // |
| // Do not be Turbo if it's under WiFi config and Qos Enabled, because the EDCA parameters |
| // should follow the settings from QAP. By Bruce, 2007-12-07. |
| // |
| if(priv->ieee80211->state != IEEE80211_LINKED) |
| goto dm_CheckEdcaTurbo_EXIT; |
| // We do not turn on EDCA turbo mode for some AP that has IOT issue |
| if(priv->ieee80211->pHTInfo->IOTAction & HT_IOT_ACT_DISABLE_EDCA_TURBO) |
| goto dm_CheckEdcaTurbo_EXIT; |
| |
| // printk("========>%s():bis_any_nonbepkts is %d\n",__FUNCTION__,priv->bis_any_nonbepkts); |
| // Check the status for current condition. |
| if(!priv->ieee80211->bis_any_nonbepkts) |
| { |
| curTxOkCnt = priv->stats.txbytesunicast - lastTxOkCnt; |
| curRxOkCnt = priv->stats.rxbytesunicast - lastRxOkCnt; |
| // For RT-AP, we needs to turn it on when Rx>Tx |
| if(curRxOkCnt > 4*curTxOkCnt) |
| { |
| //printk("%s():curRxOkCnt > 4*curTxOkCnt\n"); |
| if(!priv->bis_cur_rdlstate || !priv->bcurrent_turbo_EDCA) |
| { |
| write_nic_dword(dev, EDCAPARA_BE, edca_setting_DL[pHTInfo->IOTPeer]); |
| priv->bis_cur_rdlstate = true; |
| } |
| } |
| else |
| { |
| |
| //printk("%s():curRxOkCnt < 4*curTxOkCnt\n"); |
| if(priv->bis_cur_rdlstate || !priv->bcurrent_turbo_EDCA) |
| { |
| write_nic_dword(dev, EDCAPARA_BE, edca_setting_UL[pHTInfo->IOTPeer]); |
| priv->bis_cur_rdlstate = false; |
| } |
| |
| } |
| |
| priv->bcurrent_turbo_EDCA = true; |
| } |
| else |
| { |
| // |
| // Turn Off EDCA turbo here. |
| // Restore original EDCA according to the declaration of AP. |
| // |
|