| /* |
| * INET An implementation of the TCP/IP protocol suite for the LINUX |
| * operating system. INET is implemented using the BSD Socket |
| * interface as the means of communication with the user level. |
| * |
| * Ethernet-type device handling. |
| * |
| * Version: @(#)eth.c 1.0.7 05/25/93 |
| * |
| * Authors: Ross Biro |
| * Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG> |
| * Mark Evans, <evansmp@uhura.aston.ac.uk> |
| * Florian La Roche, <rzsfl@rz.uni-sb.de> |
| * Alan Cox, <gw4pts@gw4pts.ampr.org> |
| * |
| * Fixes: |
| * Mr Linux : Arp problems |
| * Alan Cox : Generic queue tidyup (very tiny here) |
| * Alan Cox : eth_header ntohs should be htons |
| * Alan Cox : eth_rebuild_header missing an htons and |
| * minor other things. |
| * Tegge : Arp bug fixes. |
| * Florian : Removed many unnecessary functions, code cleanup |
| * and changes for new arp and skbuff. |
| * Alan Cox : Redid header building to reflect new format. |
| * Alan Cox : ARP only when compiled with CONFIG_INET |
| * Greg Page : 802.2 and SNAP stuff. |
| * Alan Cox : MAC layer pointers/new format. |
| * Paul Gortmaker : eth_copy_and_sum shouldn't csum padding. |
| * Alan Cox : Protect against forwarding explosions with |
| * older network drivers and IFF_ALLMULTI. |
| * Christer Weinigel : Better rebuild header message. |
| * Andrew Morton : 26Feb01: kill ether_setup() - use netdev_boot_setup(). |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| */ |
| #include <linux/module.h> |
| #include <linux/types.h> |
| #include <linux/kernel.h> |
| #include <linux/string.h> |
| #include <linux/mm.h> |
| #include <linux/socket.h> |
| #include <linux/in.h> |
| #include <linux/inet.h> |
| #include <linux/ip.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/skbuff.h> |
| #include <linux/errno.h> |
| #include <linux/init.h> |
| #include <linux/if_ether.h> |
| #include <net/dst.h> |
| #include <net/arp.h> |
| #include <net/sock.h> |
| #include <net/ipv6.h> |
| #include <net/ip.h> |
| #include <net/dsa.h> |
| #include <asm/uaccess.h> |
| #include <asm/system.h> |
| |
| __setup("ether=", netdev_boot_setup); |
| |
| /** |
| * eth_header - create the Ethernet header |
| * @skb: buffer to alter |
| * @dev: source device |
| * @type: Ethernet type field |
| * @daddr: destination address (NULL leave destination address) |
| * @saddr: source address (NULL use device source address) |
| * @len: packet length (<= skb->len) |
| * |
| * |
| * Set the protocol type. For a packet of type ETH_P_802_3/2 we put the length |
| * in here instead. |
| */ |
| int eth_header(struct sk_buff *skb, struct net_device *dev, |
| unsigned short type, |
| const void *daddr, const void *saddr, unsigned len) |
| { |
| struct ethhdr *eth = (struct ethhdr *)skb_push(skb, ETH_HLEN); |
| |
| if (type != ETH_P_802_3 && type != ETH_P_802_2) |
| eth->h_proto = htons(type); |
| else |
| eth->h_proto = htons(len); |
| |
| /* |
| * Set the source hardware address. |
| */ |
| |
| if (!saddr) |
| saddr = dev->dev_addr; |
| memcpy(eth->h_source, saddr, ETH_ALEN); |
| |
| if (daddr) { |
| memcpy(eth->h_dest, daddr, ETH_ALEN); |
| return ETH_HLEN; |
| } |
| |
| /* |
| * Anyway, the loopback-device should never use this function... |
| */ |
| |
| if (dev->flags & (IFF_LOOPBACK | IFF_NOARP)) { |
| memset(eth->h_dest, 0, ETH_ALEN); |
| return ETH_HLEN; |
| } |
| |
| return -ETH_HLEN; |
| } |
| EXPORT_SYMBOL(eth_header); |
| |
| /** |
| * eth_rebuild_header- rebuild the Ethernet MAC header. |
| * @skb: socket buffer to update |
| * |
| * This is called after an ARP or IPV6 ndisc it's resolution on this |
| * sk_buff. We now let protocol (ARP) fill in the other fields. |
| * |
| * This routine CANNOT use cached dst->neigh! |
| * Really, it is used only when dst->neigh is wrong. |
| */ |
| int eth_rebuild_header(struct sk_buff *skb) |
| { |
| struct ethhdr *eth = (struct ethhdr *)skb->data; |
| struct net_device *dev = skb->dev; |
| |
| switch (eth->h_proto) { |
| #ifdef CONFIG_INET |
| case htons(ETH_P_IP): |
| return arp_find(eth->h_dest, skb); |
| #endif |
| default: |
| printk(KERN_DEBUG |
| "%s: unable to resolve type %X addresses.\n", |
| dev->name, ntohs(eth->h_proto)); |
| |
| memcpy(eth->h_source, dev->dev_addr, ETH_ALEN); |
| break; |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(eth_rebuild_header); |
| |
| /** |
| * eth_type_trans - determine the packet's protocol ID. |
| * @skb: received socket data |
| * @dev: receiving network device |
| * |
| * The rule here is that we |
| * assume 802.3 if the type field is short enough to be a length. |
| * This is normal practice and works for any 'now in use' protocol. |
| */ |
| __be16 __sram_text eth_type_trans(struct sk_buff *skb, struct net_device *dev) |
| { |
| struct ethhdr *eth; |
| unsigned char *rawp; |
| |
| skb->dev = dev; |
| skb_reset_mac_header(skb); |
| skb_pull_inline(skb, ETH_HLEN); |
| eth = eth_hdr(skb); |
| |
| if (unlikely(is_multicast_ether_addr(eth->h_dest))) { |
| if (!compare_ether_addr_64bits(eth->h_dest, dev->broadcast)) |
| skb->pkt_type = PACKET_BROADCAST; |
| else |
| skb->pkt_type = PACKET_MULTICAST; |
| } |
| |
| /* |
| * This ALLMULTI check should be redundant by 1.4 |
| * so don't forget to remove it. |
| * |
| * Seems, you forgot to remove it. All silly devices |
| * seems to set IFF_PROMISC. |
| */ |
| |
| else if (1 /*dev->flags&IFF_PROMISC */ ) { |
| if (unlikely(compare_ether_addr_64bits(eth->h_dest, dev->dev_addr))) |
| skb->pkt_type = PACKET_OTHERHOST; |
| } |
| |
| /* |
| * Some variants of DSA tagging don't have an ethertype field |
| * at all, so we check here whether one of those tagging |
| * variants has been configured on the receiving interface, |
| * and if so, set skb->protocol without looking at the packet. |
| */ |
| if (netdev_uses_dsa_tags(dev)) |
| return htons(ETH_P_DSA); |
| if (netdev_uses_trailer_tags(dev)) |
| return htons(ETH_P_TRAILER); |
| |
| if (ntohs(eth->h_proto) >= 1536) |
| return eth->h_proto; |
| |
| rawp = skb->data; |
| |
| /* |
| * This is a magic hack to spot IPX packets. Older Novell breaks |
| * the protocol design and runs IPX over 802.3 without an 802.2 LLC |
| * layer. We look for FFFF which isn't a used 802.2 SSAP/DSAP. This |
| * won't work for fault tolerant netware but does for the rest. |
| */ |
| if (*(unsigned short *)rawp == 0xFFFF) |
| return htons(ETH_P_802_3); |
| |
| /* |
| * Real 802.2 LLC |
| */ |
| return htons(ETH_P_802_2); |
| } |
| EXPORT_SYMBOL(eth_type_trans); |
| |
| /** |
| * eth_header_parse - extract hardware address from packet |
| * @skb: packet to extract header from |
| * @haddr: destination buffer |
| */ |
| int eth_header_parse(const struct sk_buff *skb, unsigned char *haddr) |
| { |
| const struct ethhdr *eth = eth_hdr(skb); |
| memcpy(haddr, eth->h_source, ETH_ALEN); |
| return ETH_ALEN; |
| } |
| EXPORT_SYMBOL(eth_header_parse); |
| |
| /** |
| * eth_header_cache - fill cache entry from neighbour |
| * @neigh: source neighbour |
| * @hh: destination cache entry |
| * Create an Ethernet header template from the neighbour. |
| */ |
| int eth_header_cache(const struct neighbour *neigh, struct hh_cache *hh) |
| { |
| __be16 type = hh->hh_type; |
| struct ethhdr *eth; |
| const struct net_device *dev = neigh->dev; |
| |
| eth = (struct ethhdr *) |
| (((u8 *) hh->hh_data) + (HH_DATA_OFF(sizeof(*eth)))); |
| |
| if (type == htons(ETH_P_802_3)) |
| return -1; |
| |
| eth->h_proto = type; |
| memcpy(eth->h_source, dev->dev_addr, ETH_ALEN); |
| memcpy(eth->h_dest, neigh->ha, ETH_ALEN); |
| hh->hh_len = ETH_HLEN; |
| return 0; |
| } |
| EXPORT_SYMBOL(eth_header_cache); |
| |
| /** |
| * eth_header_cache_update - update cache entry |
| * @hh: destination cache entry |
| * @dev: network device |
| * @haddr: new hardware address |
| * |
| * Called by Address Resolution module to notify changes in address. |
| */ |
| void eth_header_cache_update(struct hh_cache *hh, |
| const struct net_device *dev, |
| const unsigned char *haddr) |
| { |
| memcpy(((u8 *) hh->hh_data) + HH_DATA_OFF(sizeof(struct ethhdr)), |
| haddr, ETH_ALEN); |
| } |
| EXPORT_SYMBOL(eth_header_cache_update); |
| |
| /** |
| * eth_mac_addr - set new Ethernet hardware address |
| * @dev: network device |
| * @p: socket address |
| * Change hardware address of device. |
| * |
| * This doesn't change hardware matching, so needs to be overridden |
| * for most real devices. |
| */ |
| int eth_mac_addr(struct net_device *dev, void *p) |
| { |
| struct sockaddr *addr = p; |
| |
| if (netif_running(dev)) |
| return -EBUSY; |
| if (!is_valid_ether_addr(addr->sa_data)) |
| return -EADDRNOTAVAIL; |
| memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN); |
| return 0; |
| } |
| EXPORT_SYMBOL(eth_mac_addr); |
| |
| /** |
| * eth_change_mtu - set new MTU size |
| * @dev: network device |
| * @new_mtu: new Maximum Transfer Unit |
| * |
| * Allow changing MTU size. Needs to be overridden for devices |
| * supporting jumbo frames. |
| */ |
| int eth_change_mtu(struct net_device *dev, int new_mtu) |
| { |
| if (new_mtu < 68 || new_mtu > ETH_DATA_LEN) |
| return -EINVAL; |
| dev->mtu = new_mtu; |
| return 0; |
| } |
| EXPORT_SYMBOL(eth_change_mtu); |
| |
| int eth_validate_addr(struct net_device *dev) |
| { |
| if (!is_valid_ether_addr(dev->dev_addr)) |
| return -EADDRNOTAVAIL; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(eth_validate_addr); |
| |
| const struct header_ops eth_header_ops ____cacheline_aligned = { |
| .create = eth_header, |
| .parse = eth_header_parse, |
| .rebuild = eth_rebuild_header, |
| .cache = eth_header_cache, |
| .cache_update = eth_header_cache_update, |
| }; |
| |
| /** |
| * ether_setup - setup Ethernet network device |
| * @dev: network device |
| * Fill in the fields of the device structure with Ethernet-generic values. |
| */ |
| void ether_setup(struct net_device *dev) |
| { |
| dev->header_ops = ð_header_ops; |
| dev->type = ARPHRD_ETHER; |
| dev->hard_header_len = ETH_HLEN; |
| dev->mtu = ETH_DATA_LEN; |
| dev->addr_len = ETH_ALEN; |
| dev->tx_queue_len = 1000; /* Ethernet wants good queues */ |
| dev->flags = IFF_BROADCAST|IFF_MULTICAST; |
| |
| memset(dev->broadcast, 0xFF, ETH_ALEN); |
| |
| } |
| EXPORT_SYMBOL(ether_setup); |
| |
| /** |
| * alloc_etherdev_mq - Allocates and sets up an Ethernet device |
| * @sizeof_priv: Size of additional driver-private structure to be allocated |
| * for this Ethernet device |
| * @queue_count: The number of queues this device has. |
| * |
| * Fill in the fields of the device structure with Ethernet-generic |
| * values. Basically does everything except registering the device. |
| * |
| * Constructs a new net device, complete with a private data area of |
| * size (sizeof_priv). A 32-byte (not bit) alignment is enforced for |
| * this private data area. |
| */ |
| |
| struct net_device *alloc_etherdev_mq(int sizeof_priv, unsigned int queue_count) |
| { |
| return alloc_netdev_mq(sizeof_priv, "eth%d", ether_setup, queue_count); |
| } |
| EXPORT_SYMBOL(alloc_etherdev_mq); |
| |
| static size_t _format_mac_addr(char *buf, int buflen, |
| const unsigned char *addr, int len) |
| { |
| int i; |
| char *cp = buf; |
| |
| for (i = 0; i < len; i++) { |
| cp += scnprintf(cp, buflen - (cp - buf), "%02x", addr[i]); |
| if (i == len - 1) |
| break; |
| cp += strlcpy(cp, ":", buflen - (cp - buf)); |
| } |
| return cp - buf; |
| } |
| |
| ssize_t sysfs_format_mac(char *buf, const unsigned char *addr, int len) |
| { |
| size_t l; |
| |
| l = _format_mac_addr(buf, PAGE_SIZE, addr, len); |
| l += strlcpy(buf + l, "\n", PAGE_SIZE - l); |
| return ((ssize_t) l); |
| } |
| EXPORT_SYMBOL(sysfs_format_mac); |