| /* |
| * PCMCIA 16-bit resource management functions |
| * |
| * The initial developer of the original code is David A. Hinds |
| * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds |
| * are Copyright (C) 1999 David A. Hinds. All Rights Reserved. |
| * |
| * Copyright (C) 1999 David A. Hinds |
| * Copyright (C) 2004-2005 Dominik Brodowski |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/interrupt.h> |
| #include <linux/delay.h> |
| #include <linux/pci.h> |
| #include <linux/device.h> |
| #include <linux/netdevice.h> |
| #include <linux/slab.h> |
| |
| #include <asm/irq.h> |
| |
| #include <pcmcia/cs_types.h> |
| #include <pcmcia/ss.h> |
| #include <pcmcia/cs.h> |
| #include <pcmcia/cistpl.h> |
| #include <pcmcia/cisreg.h> |
| #include <pcmcia/ds.h> |
| |
| #include "cs_internal.h" |
| |
| |
| /* Access speed for IO windows */ |
| static int io_speed; |
| module_param(io_speed, int, 0444); |
| |
| |
| int pcmcia_validate_mem(struct pcmcia_socket *s) |
| { |
| if (s->resource_ops->validate_mem) |
| return s->resource_ops->validate_mem(s); |
| /* if there is no callback, we can assume that everything is OK */ |
| return 0; |
| } |
| |
| struct resource *pcmcia_find_mem_region(u_long base, u_long num, u_long align, |
| int low, struct pcmcia_socket *s) |
| { |
| if (s->resource_ops->find_mem) |
| return s->resource_ops->find_mem(base, num, align, low, s); |
| return NULL; |
| } |
| |
| |
| /** alloc_io_space |
| * |
| * Special stuff for managing IO windows, because they are scarce |
| */ |
| |
| static int alloc_io_space(struct pcmcia_socket *s, u_int attr, |
| unsigned int *base, unsigned int num, u_int lines) |
| { |
| unsigned int align; |
| |
| align = (*base) ? (lines ? 1<<lines : 0) : 1; |
| if (align && (align < num)) { |
| if (*base) { |
| dev_dbg(&s->dev, "odd IO request: num %#x align %#x\n", |
| num, align); |
| align = 0; |
| } else |
| while (align && (align < num)) |
| align <<= 1; |
| } |
| if (*base & ~(align-1)) { |
| dev_dbg(&s->dev, "odd IO request: base %#x align %#x\n", |
| *base, align); |
| align = 0; |
| } |
| |
| return s->resource_ops->find_io(s, attr, base, num, align); |
| } /* alloc_io_space */ |
| |
| |
| static void release_io_space(struct pcmcia_socket *s, unsigned int base, |
| unsigned int num) |
| { |
| int i; |
| |
| for (i = 0; i < MAX_IO_WIN; i++) { |
| if (!s->io[i].res) |
| continue; |
| if ((s->io[i].res->start <= base) && |
| (s->io[i].res->end >= base+num-1)) { |
| s->io[i].InUse -= num; |
| /* Free the window if no one else is using it */ |
| if (s->io[i].InUse == 0) { |
| release_resource(s->io[i].res); |
| kfree(s->io[i].res); |
| s->io[i].res = NULL; |
| } |
| } |
| } |
| } /* release_io_space */ |
| |
| |
| /** pccard_access_configuration_register |
| * |
| * Access_configuration_register() reads and writes configuration |
| * registers in attribute memory. Memory window 0 is reserved for |
| * this and the tuple reading services. |
| */ |
| |
| int pcmcia_access_configuration_register(struct pcmcia_device *p_dev, |
| conf_reg_t *reg) |
| { |
| struct pcmcia_socket *s; |
| config_t *c; |
| int addr; |
| u_char val; |
| int ret = 0; |
| |
| if (!p_dev || !p_dev->function_config) |
| return -EINVAL; |
| |
| s = p_dev->socket; |
| |
| mutex_lock(&s->ops_mutex); |
| c = p_dev->function_config; |
| |
| if (!(c->state & CONFIG_LOCKED)) { |
| dev_dbg(&s->dev, "Configuration isnt't locked\n"); |
| mutex_unlock(&s->ops_mutex); |
| return -EACCES; |
| } |
| |
| addr = (c->ConfigBase + reg->Offset) >> 1; |
| |
| switch (reg->Action) { |
| case CS_READ: |
| ret = pcmcia_read_cis_mem(s, 1, addr, 1, &val); |
| reg->Value = val; |
| break; |
| case CS_WRITE: |
| val = reg->Value; |
| pcmcia_write_cis_mem(s, 1, addr, 1, &val); |
| break; |
| default: |
| dev_dbg(&s->dev, "Invalid conf register request\n"); |
| ret = -EINVAL; |
| break; |
| } |
| mutex_unlock(&s->ops_mutex); |
| return ret; |
| } /* pcmcia_access_configuration_register */ |
| EXPORT_SYMBOL(pcmcia_access_configuration_register); |
| |
| |
| int pcmcia_map_mem_page(struct pcmcia_device *p_dev, window_handle_t wh, |
| memreq_t *req) |
| { |
| struct pcmcia_socket *s = p_dev->socket; |
| int ret; |
| |
| wh--; |
| if (wh >= MAX_WIN) |
| return -EINVAL; |
| if (req->Page != 0) { |
| dev_dbg(&s->dev, "failure: requested page is zero\n"); |
| return -EINVAL; |
| } |
| mutex_lock(&s->ops_mutex); |
| s->win[wh].card_start = req->CardOffset; |
| ret = s->ops->set_mem_map(s, &s->win[wh]); |
| if (ret) |
| dev_warn(&s->dev, "failed to set_mem_map\n"); |
| mutex_unlock(&s->ops_mutex); |
| return ret; |
| } /* pcmcia_map_mem_page */ |
| EXPORT_SYMBOL(pcmcia_map_mem_page); |
| |
| |
| /** pcmcia_modify_configuration |
| * |
| * Modify a locked socket configuration |
| */ |
| int pcmcia_modify_configuration(struct pcmcia_device *p_dev, |
| modconf_t *mod) |
| { |
| struct pcmcia_socket *s; |
| config_t *c; |
| int ret; |
| |
| s = p_dev->socket; |
| |
| mutex_lock(&s->ops_mutex); |
| c = p_dev->function_config; |
| |
| if (!(s->state & SOCKET_PRESENT)) { |
| dev_dbg(&s->dev, "No card present\n"); |
| ret = -ENODEV; |
| goto unlock; |
| } |
| if (!(c->state & CONFIG_LOCKED)) { |
| dev_dbg(&s->dev, "Configuration isnt't locked\n"); |
| ret = -EACCES; |
| goto unlock; |
| } |
| |
| if (mod->Attributes & (CONF_IRQ_CHANGE_VALID | CONF_VCC_CHANGE_VALID)) { |
| dev_dbg(&s->dev, |
| "changing Vcc or IRQ is not allowed at this time\n"); |
| ret = -EINVAL; |
| goto unlock; |
| } |
| |
| /* We only allow changing Vpp1 and Vpp2 to the same value */ |
| if ((mod->Attributes & CONF_VPP1_CHANGE_VALID) && |
| (mod->Attributes & CONF_VPP2_CHANGE_VALID)) { |
| if (mod->Vpp1 != mod->Vpp2) { |
| dev_dbg(&s->dev, "Vpp1 and Vpp2 must be the same\n"); |
| ret = -EINVAL; |
| goto unlock; |
| } |
| s->socket.Vpp = mod->Vpp1; |
| if (s->ops->set_socket(s, &s->socket)) { |
| dev_printk(KERN_WARNING, &s->dev, |
| "Unable to set VPP\n"); |
| ret = -EIO; |
| goto unlock; |
| } |
| } else if ((mod->Attributes & CONF_VPP1_CHANGE_VALID) || |
| (mod->Attributes & CONF_VPP2_CHANGE_VALID)) { |
| dev_dbg(&s->dev, "changing Vcc is not allowed at this time\n"); |
| ret = -EINVAL; |
| goto unlock; |
| } |
| |
| if (mod->Attributes & CONF_IO_CHANGE_WIDTH) { |
| pccard_io_map io_off = { 0, 0, 0, 0, 1 }; |
| pccard_io_map io_on; |
| int i; |
| |
| io_on.speed = io_speed; |
| for (i = 0; i < MAX_IO_WIN; i++) { |
| if (!s->io[i].res) |
| continue; |
| io_off.map = i; |
| io_on.map = i; |
| |
| io_on.flags = MAP_ACTIVE | IO_DATA_PATH_WIDTH_8; |
| io_on.start = s->io[i].res->start; |
| io_on.stop = s->io[i].res->end; |
| |
| s->ops->set_io_map(s, &io_off); |
| mdelay(40); |
| s->ops->set_io_map(s, &io_on); |
| } |
| } |
| ret = 0; |
| unlock: |
| mutex_unlock(&s->ops_mutex); |
| |
| return ret; |
| } /* modify_configuration */ |
| EXPORT_SYMBOL(pcmcia_modify_configuration); |
| |
| |
| int pcmcia_release_configuration(struct pcmcia_device *p_dev) |
| { |
| pccard_io_map io = { 0, 0, 0, 0, 1 }; |
| struct pcmcia_socket *s = p_dev->socket; |
| config_t *c; |
| int i; |
| |
| mutex_lock(&s->ops_mutex); |
| c = p_dev->function_config; |
| if (p_dev->_locked) { |
| p_dev->_locked = 0; |
| if (--(s->lock_count) == 0) { |
| s->socket.flags = SS_OUTPUT_ENA; /* Is this correct? */ |
| s->socket.Vpp = 0; |
| s->socket.io_irq = 0; |
| s->ops->set_socket(s, &s->socket); |
| } |
| } |
| if (c->state & CONFIG_LOCKED) { |
| c->state &= ~CONFIG_LOCKED; |
| if (c->state & CONFIG_IO_REQ) |
| for (i = 0; i < MAX_IO_WIN; i++) { |
| if (!s->io[i].res) |
| continue; |
| s->io[i].Config--; |
| if (s->io[i].Config != 0) |
| continue; |
| io.map = i; |
| s->ops->set_io_map(s, &io); |
| } |
| } |
| mutex_unlock(&s->ops_mutex); |
| |
| return 0; |
| } /* pcmcia_release_configuration */ |
| |
| |
| /** pcmcia_release_io |
| * |
| * Release_io() releases the I/O ranges allocated by a client. This |
| * may be invoked some time after a card ejection has already dumped |
| * the actual socket configuration, so if the client is "stale", we |
| * don't bother checking the port ranges against the current socket |
| * values. |
| */ |
| static int pcmcia_release_io(struct pcmcia_device *p_dev, io_req_t *req) |
| { |
| struct pcmcia_socket *s = p_dev->socket; |
| int ret = -EINVAL; |
| config_t *c; |
| |
| mutex_lock(&s->ops_mutex); |
| c = p_dev->function_config; |
| |
| if (!p_dev->_io) |
| goto out; |
| |
| p_dev->_io = 0; |
| |
| if ((c->io.BasePort1 != req->BasePort1) || |
| (c->io.NumPorts1 != req->NumPorts1) || |
| (c->io.BasePort2 != req->BasePort2) || |
| (c->io.NumPorts2 != req->NumPorts2)) |
| goto out; |
| |
| c->state &= ~CONFIG_IO_REQ; |
| |
| release_io_space(s, req->BasePort1, req->NumPorts1); |
| if (req->NumPorts2) |
| release_io_space(s, req->BasePort2, req->NumPorts2); |
| |
| out: |
| mutex_unlock(&s->ops_mutex); |
| |
| return ret; |
| } /* pcmcia_release_io */ |
| |
| |
| int pcmcia_release_window(struct pcmcia_device *p_dev, window_handle_t wh) |
| { |
| struct pcmcia_socket *s = p_dev->socket; |
| pccard_mem_map *win; |
| |
| wh--; |
| if (wh >= MAX_WIN) |
| return -EINVAL; |
| |
| mutex_lock(&s->ops_mutex); |
| win = &s->win[wh]; |
| |
| if (!(p_dev->_win & CLIENT_WIN_REQ(wh))) { |
| dev_dbg(&s->dev, "not releasing unknown window\n"); |
| mutex_unlock(&s->ops_mutex); |
| return -EINVAL; |
| } |
| |
| /* Shut down memory window */ |
| win->flags &= ~MAP_ACTIVE; |
| s->ops->set_mem_map(s, win); |
| s->state &= ~SOCKET_WIN_REQ(wh); |
| |
| /* Release system memory */ |
| if (win->res) { |
| release_resource(win->res); |
| kfree(win->res); |
| win->res = NULL; |
| } |
| p_dev->_win &= ~CLIENT_WIN_REQ(wh); |
| mutex_unlock(&s->ops_mutex); |
| |
| return 0; |
| } /* pcmcia_release_window */ |
| EXPORT_SYMBOL(pcmcia_release_window); |
| |
| |
| int pcmcia_request_configuration(struct pcmcia_device *p_dev, |
| config_req_t *req) |
| { |
| int i; |
| u_int base; |
| struct pcmcia_socket *s = p_dev->socket; |
| config_t *c; |
| pccard_io_map iomap; |
| |
| if (!(s->state & SOCKET_PRESENT)) |
| return -ENODEV; |
| |
| if (req->IntType & INT_CARDBUS) { |
| dev_dbg(&s->dev, "IntType may not be INT_CARDBUS\n"); |
| return -EINVAL; |
| } |
| |
| mutex_lock(&s->ops_mutex); |
| c = p_dev->function_config; |
| if (c->state & CONFIG_LOCKED) { |
| mutex_unlock(&s->ops_mutex); |
| dev_dbg(&s->dev, "Configuration is locked\n"); |
| return -EACCES; |
| } |
| |
| /* Do power control. We don't allow changes in Vcc. */ |
| s->socket.Vpp = req->Vpp; |
| if (s->ops->set_socket(s, &s->socket)) { |
| mutex_unlock(&s->ops_mutex); |
| dev_printk(KERN_WARNING, &s->dev, |
| "Unable to set socket state\n"); |
| return -EINVAL; |
| } |
| |
| /* Pick memory or I/O card, DMA mode, interrupt */ |
| c->IntType = req->IntType; |
| c->Attributes = req->Attributes; |
| if (req->IntType & INT_MEMORY_AND_IO) |
| s->socket.flags |= SS_IOCARD; |
| if (req->IntType & INT_ZOOMED_VIDEO) |
| s->socket.flags |= SS_ZVCARD | SS_IOCARD; |
| if (req->Attributes & CONF_ENABLE_DMA) |
| s->socket.flags |= SS_DMA_MODE; |
| if (req->Attributes & CONF_ENABLE_SPKR) |
| s->socket.flags |= SS_SPKR_ENA; |
| if (req->Attributes & CONF_ENABLE_IRQ) |
| s->socket.io_irq = s->pcmcia_irq; |
| else |
| s->socket.io_irq = 0; |
| s->ops->set_socket(s, &s->socket); |
| s->lock_count++; |
| |
| /* Set up CIS configuration registers */ |
| base = c->ConfigBase = req->ConfigBase; |
| c->CardValues = req->Present; |
| if (req->Present & PRESENT_COPY) { |
| c->Copy = req->Copy; |
| pcmcia_write_cis_mem(s, 1, (base + CISREG_SCR)>>1, 1, &c->Copy); |
| } |
| if (req->Present & PRESENT_OPTION) { |
| if (s->functions == 1) { |
| c->Option = req->ConfigIndex & COR_CONFIG_MASK; |
| } else { |
| c->Option = req->ConfigIndex & COR_MFC_CONFIG_MASK; |
| c->Option |= COR_FUNC_ENA|COR_IREQ_ENA; |
| if (req->Present & PRESENT_IOBASE_0) |
| c->Option |= COR_ADDR_DECODE; |
| } |
| if ((req->Attributes & CONF_ENABLE_IRQ) && |
| !(req->Attributes & CONF_ENABLE_PULSE_IRQ)) |
| c->Option |= COR_LEVEL_REQ; |
| pcmcia_write_cis_mem(s, 1, (base + CISREG_COR)>>1, 1, &c->Option); |
| mdelay(40); |
| } |
| if (req->Present & PRESENT_STATUS) { |
| c->Status = req->Status; |
| pcmcia_write_cis_mem(s, 1, (base + CISREG_CCSR)>>1, 1, &c->Status); |
| } |
| if (req->Present & PRESENT_PIN_REPLACE) { |
| c->Pin = req->Pin; |
| pcmcia_write_cis_mem(s, 1, (base + CISREG_PRR)>>1, 1, &c->Pin); |
| } |
| if (req->Present & PRESENT_EXT_STATUS) { |
| c->ExtStatus = req->ExtStatus; |
| pcmcia_write_cis_mem(s, 1, (base + CISREG_ESR)>>1, 1, &c->ExtStatus); |
| } |
| if (req->Present & PRESENT_IOBASE_0) { |
| u_char b = c->io.BasePort1 & 0xff; |
| pcmcia_write_cis_mem(s, 1, (base + CISREG_IOBASE_0)>>1, 1, &b); |
| b = (c->io.BasePort1 >> 8) & 0xff; |
| pcmcia_write_cis_mem(s, 1, (base + CISREG_IOBASE_1)>>1, 1, &b); |
| } |
| if (req->Present & PRESENT_IOSIZE) { |
| u_char b = c->io.NumPorts1 + c->io.NumPorts2 - 1; |
| pcmcia_write_cis_mem(s, 1, (base + CISREG_IOSIZE)>>1, 1, &b); |
| } |
| |
| /* Configure I/O windows */ |
| if (c->state & CONFIG_IO_REQ) { |
| iomap.speed = io_speed; |
| for (i = 0; i < MAX_IO_WIN; i++) |
| if (s->io[i].res) { |
| iomap.map = i; |
| iomap.flags = MAP_ACTIVE; |
| switch (s->io[i].res->flags & IO_DATA_PATH_WIDTH) { |
| case IO_DATA_PATH_WIDTH_16: |
| iomap.flags |= MAP_16BIT; break; |
| case IO_DATA_PATH_WIDTH_AUTO: |
| iomap.flags |= MAP_AUTOSZ; break; |
| default: |
| break; |
| } |
| iomap.start = s->io[i].res->start; |
| iomap.stop = s->io[i].res->end; |
| s->ops->set_io_map(s, &iomap); |
| s->io[i].Config++; |
| } |
| } |
| |
| c->state |= CONFIG_LOCKED; |
| p_dev->_locked = 1; |
| mutex_unlock(&s->ops_mutex); |
| return 0; |
| } /* pcmcia_request_configuration */ |
| EXPORT_SYMBOL(pcmcia_request_configuration); |
| |
| |
| /** pcmcia_request_io |
| * |
| * Request_io() reserves ranges of port addresses for a socket. |
| * I have not implemented range sharing or alias addressing. |
| */ |
| int pcmcia_request_io(struct pcmcia_device *p_dev, io_req_t *req) |
| { |
| struct pcmcia_socket *s = p_dev->socket; |
| config_t *c; |
| int ret = -EINVAL; |
| |
| mutex_lock(&s->ops_mutex); |
| |
| if (!(s->state & SOCKET_PRESENT)) { |
| dev_dbg(&s->dev, "No card present\n"); |
| goto out; |
| } |
| |
| if (!req) |
| goto out; |
| |
| c = p_dev->function_config; |
| if (c->state & CONFIG_LOCKED) { |
| dev_dbg(&s->dev, "Configuration is locked\n"); |
| goto out; |
| } |
| if (c->state & CONFIG_IO_REQ) { |
| dev_dbg(&s->dev, "IO already configured\n"); |
| goto out; |
| } |
| if (req->Attributes1 & (IO_SHARED | IO_FORCE_ALIAS_ACCESS)) { |
| dev_dbg(&s->dev, "bad attribute setting for IO region 1\n"); |
| goto out; |
| } |
| if ((req->NumPorts2 > 0) && |
| (req->Attributes2 & (IO_SHARED | IO_FORCE_ALIAS_ACCESS))) { |
| dev_dbg(&s->dev, "bad attribute setting for IO region 2\n"); |
| goto out; |
| } |
| |
| dev_dbg(&s->dev, "trying to allocate resource 1\n"); |
| ret = alloc_io_space(s, req->Attributes1, &req->BasePort1, |
| req->NumPorts1, req->IOAddrLines); |
| if (ret) { |
| dev_dbg(&s->dev, "allocation of resource 1 failed\n"); |
| goto out; |
| } |
| |
| if (req->NumPorts2) { |
| dev_dbg(&s->dev, "trying to allocate resource 2\n"); |
| ret = alloc_io_space(s, req->Attributes2, &req->BasePort2, |
| req->NumPorts2, req->IOAddrLines); |
| if (ret) { |
| dev_dbg(&s->dev, "allocation of resource 2 failed\n"); |
| release_io_space(s, req->BasePort1, req->NumPorts1); |
| goto out; |
| } |
| } |
| |
| c->io = *req; |
| c->state |= CONFIG_IO_REQ; |
| p_dev->_io = 1; |
| dev_dbg(&s->dev, "allocating resources succeeded: %d\n", ret); |
| |
| out: |
| mutex_unlock(&s->ops_mutex); |
| |
| return ret; |
| } /* pcmcia_request_io */ |
| EXPORT_SYMBOL(pcmcia_request_io); |
| |
| |
| /** |
| * pcmcia_request_irq() - attempt to request a IRQ for a PCMCIA device |
| * |
| * pcmcia_request_irq() is a wrapper around request_irq which will allow |
| * the PCMCIA core to clean up the registration in pcmcia_disable_device(). |
| * Drivers are free to use request_irq() directly, but then they need to |
| * call free_irq themselfves, too. Also, only IRQF_SHARED capable IRQ |
| * handlers are allowed. |
| */ |
| int __must_check pcmcia_request_irq(struct pcmcia_device *p_dev, |
| irq_handler_t handler) |
| { |
| int ret; |
| |
| if (!p_dev->irq) |
| return -EINVAL; |
| |
| ret = request_irq(p_dev->irq, handler, IRQF_SHARED, |
| p_dev->devname, p_dev->priv); |
| if (!ret) |
| p_dev->_irq = 1; |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(pcmcia_request_irq); |
| |
| |
| /** |
| * pcmcia_request_exclusive_irq() - attempt to request an exclusive IRQ first |
| * |
| * pcmcia_request_exclusive_irq() is a wrapper around request_irq which |
| * attempts first to request an exclusive IRQ. If it fails, it also accepts |
| * a shared IRQ, but prints out a warning. PCMCIA drivers should allow for |
| * IRQ sharing and either use request_irq directly (then they need to call |
| * free_irq themselves, too), or the pcmcia_request_irq() function. |
| */ |
| int __must_check |
| __pcmcia_request_exclusive_irq(struct pcmcia_device *p_dev, |
| irq_handler_t handler) |
| { |
| int ret; |
| |
| if (!p_dev->irq) |
| return -EINVAL; |
| |
| ret = request_irq(p_dev->irq, handler, 0, p_dev->devname, p_dev->priv); |
| if (ret) { |
| ret = pcmcia_request_irq(p_dev, handler); |
| dev_printk(KERN_WARNING, &p_dev->dev, "pcmcia: " |
| "request for exclusive IRQ could not be fulfilled.\n"); |
| dev_printk(KERN_WARNING, &p_dev->dev, "pcmcia: the driver " |
| "needs updating to supported shared IRQ lines.\n"); |
| } |
| if (ret) |
| dev_printk(KERN_INFO, &p_dev->dev, "request_irq() failed\n"); |
| else |
| p_dev->_irq = 1; |
| |
| return ret; |
| } /* pcmcia_request_exclusive_irq */ |
| EXPORT_SYMBOL(__pcmcia_request_exclusive_irq); |
| |
| |
| #ifdef CONFIG_PCMCIA_PROBE |
| |
| /* mask of IRQs already reserved by other cards, we should avoid using them */ |
| static u8 pcmcia_used_irq[32]; |
| |
| static irqreturn_t test_action(int cpl, void *dev_id) |
| { |
| return IRQ_NONE; |
| } |
| |
| /** |
| * pcmcia_setup_isa_irq() - determine whether an ISA IRQ can be used |
| * @p_dev - the associated PCMCIA device |
| * |
| * locking note: must be called with ops_mutex locked. |
| */ |
| static int pcmcia_setup_isa_irq(struct pcmcia_device *p_dev, int type) |
| { |
| struct pcmcia_socket *s = p_dev->socket; |
| unsigned int try, irq; |
| u32 mask = s->irq_mask; |
| int ret = -ENODEV; |
| |
| for (try = 0; try < 64; try++) { |
| irq = try % 32; |
| |
| if (irq > NR_IRQS) |
| continue; |
| |
| /* marked as available by driver, not blocked by userspace? */ |
| if (!((mask >> irq) & 1)) |
| continue; |
| |
| /* avoid an IRQ which is already used by another PCMCIA card */ |
| if ((try < 32) && pcmcia_used_irq[irq]) |
| continue; |
| |
| /* register the correct driver, if possible, to check whether |
| * registering a dummy handle works, i.e. if the IRQ isn't |
| * marked as used by the kernel resource management core */ |
| ret = request_irq(irq, test_action, type, p_dev->devname, |
| p_dev); |
| if (!ret) { |
| free_irq(irq, p_dev); |
| p_dev->irq = s->pcmcia_irq = irq; |
| pcmcia_used_irq[irq]++; |
| break; |
| } |
| } |
| |
| return ret; |
| } |
| |
| void pcmcia_cleanup_irq(struct pcmcia_socket *s) |
| { |
| pcmcia_used_irq[s->pcmcia_irq]--; |
| s->pcmcia_irq = 0; |
| } |
| |
| #else /* CONFIG_PCMCIA_PROBE */ |
| |
| static int pcmcia_setup_isa_irq(struct pcmcia_device *p_dev, int type) |
| { |
| return -EINVAL; |
| } |
| |
| void pcmcia_cleanup_irq(struct pcmcia_socket *s) |
| { |
| s->pcmcia_irq = 0; |
| return; |
| } |
| |
| #endif /* CONFIG_PCMCIA_PROBE */ |
| |
| |
| /** |
| * pcmcia_setup_irq() - determine IRQ to be used for device |
| * @p_dev - the associated PCMCIA device |
| * |
| * locking note: must be called with ops_mutex locked. |
| */ |
| int pcmcia_setup_irq(struct pcmcia_device *p_dev) |
| { |
| struct pcmcia_socket *s = p_dev->socket; |
| |
| if (p_dev->irq) |
| return 0; |
| |
| /* already assigned? */ |
| if (s->pcmcia_irq) { |
| p_dev->irq = s->pcmcia_irq; |
| return 0; |
| } |
| |
| /* prefer an exclusive ISA irq */ |
| if (!pcmcia_setup_isa_irq(p_dev, 0)) |
| return 0; |
| |
| /* but accept a shared ISA irq */ |
| if (!pcmcia_setup_isa_irq(p_dev, IRQF_SHARED)) |
| return 0; |
| |
| /* but use the PCI irq otherwise */ |
| if (s->pci_irq) { |
| p_dev->irq = s->pcmcia_irq = s->pci_irq; |
| return 0; |
| } |
| |
| return -EINVAL; |
| } |
| |
| |
| /** pcmcia_request_window |
| * |
| * Request_window() establishes a mapping between card memory space |
| * and system memory space. |
| */ |
| int pcmcia_request_window(struct pcmcia_device *p_dev, win_req_t *req, window_handle_t *wh) |
| { |
| struct pcmcia_socket *s = p_dev->socket; |
| pccard_mem_map *win; |
| u_long align; |
| int w; |
| |
| if (!(s->state & SOCKET_PRESENT)) { |
| dev_dbg(&s->dev, "No card present\n"); |
| return -ENODEV; |
| } |
| if (req->Attributes & (WIN_PAGED | WIN_SHARED)) { |
| dev_dbg(&s->dev, "bad attribute setting for iomem region\n"); |
| return -EINVAL; |
| } |
| |
| /* Window size defaults to smallest available */ |
| if (req->Size == 0) |
| req->Size = s->map_size; |
| align = (((s->features & SS_CAP_MEM_ALIGN) || |
| (req->Attributes & WIN_STRICT_ALIGN)) ? |
| req->Size : s->map_size); |
| if (req->Size & (s->map_size-1)) { |
| dev_dbg(&s->dev, "invalid map size\n"); |
| return -EINVAL; |
| } |
| if ((req->Base && (s->features & SS_CAP_STATIC_MAP)) || |
| (req->Base & (align-1))) { |
| dev_dbg(&s->dev, "invalid base address\n"); |
| return -EINVAL; |
| } |
| if (req->Base) |
| align = 0; |
| |
| /* Allocate system memory window */ |
| for (w = 0; w < MAX_WIN; w++) |
| if (!(s->state & SOCKET_WIN_REQ(w))) |
| break; |
| if (w == MAX_WIN) { |
| dev_dbg(&s->dev, "all windows are used already\n"); |
| return -EINVAL; |
| } |
| |
| mutex_lock(&s->ops_mutex); |
| win = &s->win[w]; |
| |
| if (!(s->features & SS_CAP_STATIC_MAP)) { |
| win->res = pcmcia_find_mem_region(req->Base, req->Size, align, |
| (req->Attributes & WIN_MAP_BELOW_1MB), s); |
| if (!win->res) { |
| dev_dbg(&s->dev, "allocating mem region failed\n"); |
| mutex_unlock(&s->ops_mutex); |
| return -EINVAL; |
| } |
| } |
| p_dev->_win |= CLIENT_WIN_REQ(w); |
| |
| /* Configure the socket controller */ |
| win->map = w+1; |
| win->flags = 0; |
| win->speed = req->AccessSpeed; |
| if (req->Attributes & WIN_MEMORY_TYPE) |
| win->flags |= MAP_ATTRIB; |
| if (req->Attributes & WIN_ENABLE) |
| win->flags |= MAP_ACTIVE; |
| if (req->Attributes & WIN_DATA_WIDTH_16) |
| win->flags |= MAP_16BIT; |
| if (req->Attributes & WIN_USE_WAIT) |
| win->flags |= MAP_USE_WAIT; |
| win->card_start = 0; |
| |
| if (s->ops->set_mem_map(s, win) != 0) { |
| dev_dbg(&s->dev, "failed to set memory mapping\n"); |
| mutex_unlock(&s->ops_mutex); |
| return -EIO; |
| } |
| s->state |= SOCKET_WIN_REQ(w); |
| |
| /* Return window handle */ |
| if (s->features & SS_CAP_STATIC_MAP) |
| req->Base = win->static_start; |
| else |
| req->Base = win->res->start; |
| |
| mutex_unlock(&s->ops_mutex); |
| *wh = w + 1; |
| |
| return 0; |
| } /* pcmcia_request_window */ |
| EXPORT_SYMBOL(pcmcia_request_window); |
| |
| void pcmcia_disable_device(struct pcmcia_device *p_dev) |
| { |
| pcmcia_release_configuration(p_dev); |
| pcmcia_release_io(p_dev, &p_dev->io); |
| if (p_dev->_irq) { |
| free_irq(p_dev->irq, p_dev->priv); |
| p_dev->_irq = 0; |
| } |
| if (p_dev->win) |
| pcmcia_release_window(p_dev, p_dev->win); |
| } |
| EXPORT_SYMBOL(pcmcia_disable_device); |