| /* |
| * drivers/mmc/host/omap_hsmmc.c |
| * |
| * Driver for OMAP2430/3430 MMC controller. |
| * |
| * Copyright (C) 2007 Texas Instruments. |
| * |
| * Authors: |
| * Syed Mohammed Khasim <x0khasim@ti.com> |
| * Madhusudhan <madhu.cr@ti.com> |
| * Mohit Jalori <mjalori@ti.com> |
| * |
| * This file is licensed under the terms of the GNU General Public License |
| * version 2. This program is licensed "as is" without any warranty of any |
| * kind, whether express or implied. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/debugfs.h> |
| #include <linux/seq_file.h> |
| #include <linux/interrupt.h> |
| #include <linux/delay.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/platform_device.h> |
| #include <linux/workqueue.h> |
| #include <linux/timer.h> |
| #include <linux/clk.h> |
| #include <linux/mmc/host.h> |
| #include <linux/mmc/core.h> |
| #include <linux/io.h> |
| #include <linux/semaphore.h> |
| #include <linux/gpio.h> |
| #include <linux/regulator/consumer.h> |
| #include <plat/dma.h> |
| #include <mach/hardware.h> |
| #include <plat/board.h> |
| #include <plat/mmc.h> |
| #include <plat/cpu.h> |
| |
| /* OMAP HSMMC Host Controller Registers */ |
| #define OMAP_HSMMC_SYSCONFIG 0x0010 |
| #define OMAP_HSMMC_SYSSTATUS 0x0014 |
| #define OMAP_HSMMC_CON 0x002C |
| #define OMAP_HSMMC_BLK 0x0104 |
| #define OMAP_HSMMC_ARG 0x0108 |
| #define OMAP_HSMMC_CMD 0x010C |
| #define OMAP_HSMMC_RSP10 0x0110 |
| #define OMAP_HSMMC_RSP32 0x0114 |
| #define OMAP_HSMMC_RSP54 0x0118 |
| #define OMAP_HSMMC_RSP76 0x011C |
| #define OMAP_HSMMC_DATA 0x0120 |
| #define OMAP_HSMMC_HCTL 0x0128 |
| #define OMAP_HSMMC_SYSCTL 0x012C |
| #define OMAP_HSMMC_STAT 0x0130 |
| #define OMAP_HSMMC_IE 0x0134 |
| #define OMAP_HSMMC_ISE 0x0138 |
| #define OMAP_HSMMC_CAPA 0x0140 |
| |
| #define VS18 (1 << 26) |
| #define VS30 (1 << 25) |
| #define SDVS18 (0x5 << 9) |
| #define SDVS30 (0x6 << 9) |
| #define SDVS33 (0x7 << 9) |
| #define SDVS_MASK 0x00000E00 |
| #define SDVSCLR 0xFFFFF1FF |
| #define SDVSDET 0x00000400 |
| #define AUTOIDLE 0x1 |
| #define SDBP (1 << 8) |
| #define DTO 0xe |
| #define ICE 0x1 |
| #define ICS 0x2 |
| #define CEN (1 << 2) |
| #define CLKD_MASK 0x0000FFC0 |
| #define CLKD_SHIFT 6 |
| #define DTO_MASK 0x000F0000 |
| #define DTO_SHIFT 16 |
| #define INT_EN_MASK 0x307F0033 |
| #define BWR_ENABLE (1 << 4) |
| #define BRR_ENABLE (1 << 5) |
| #define INIT_STREAM (1 << 1) |
| #define DP_SELECT (1 << 21) |
| #define DDIR (1 << 4) |
| #define DMA_EN 0x1 |
| #define MSBS (1 << 5) |
| #define BCE (1 << 1) |
| #define FOUR_BIT (1 << 1) |
| #define DW8 (1 << 5) |
| #define CC 0x1 |
| #define TC 0x02 |
| #define OD 0x1 |
| #define ERR (1 << 15) |
| #define CMD_TIMEOUT (1 << 16) |
| #define DATA_TIMEOUT (1 << 20) |
| #define CMD_CRC (1 << 17) |
| #define DATA_CRC (1 << 21) |
| #define CARD_ERR (1 << 28) |
| #define STAT_CLEAR 0xFFFFFFFF |
| #define INIT_STREAM_CMD 0x00000000 |
| #define DUAL_VOLT_OCR_BIT 7 |
| #define SRC (1 << 25) |
| #define SRD (1 << 26) |
| #define SOFTRESET (1 << 1) |
| #define RESETDONE (1 << 0) |
| |
| /* |
| * FIXME: Most likely all the data using these _DEVID defines should come |
| * from the platform_data, or implemented in controller and slot specific |
| * functions. |
| */ |
| #define OMAP_MMC1_DEVID 0 |
| #define OMAP_MMC2_DEVID 1 |
| #define OMAP_MMC3_DEVID 2 |
| #define OMAP_MMC4_DEVID 3 |
| #define OMAP_MMC5_DEVID 4 |
| |
| #define MMC_TIMEOUT_MS 20 |
| #define OMAP_MMC_MASTER_CLOCK 96000000 |
| #define DRIVER_NAME "mmci-omap-hs" |
| |
| /* Timeouts for entering power saving states on inactivity, msec */ |
| #define OMAP_MMC_DISABLED_TIMEOUT 100 |
| #define OMAP_MMC_SLEEP_TIMEOUT 1000 |
| #define OMAP_MMC_OFF_TIMEOUT 8000 |
| |
| /* |
| * One controller can have multiple slots, like on some omap boards using |
| * omap.c controller driver. Luckily this is not currently done on any known |
| * omap_hsmmc.c device. |
| */ |
| #define mmc_slot(host) (host->pdata->slots[host->slot_id]) |
| |
| /* |
| * MMC Host controller read/write API's |
| */ |
| #define OMAP_HSMMC_READ(base, reg) \ |
| __raw_readl((base) + OMAP_HSMMC_##reg) |
| |
| #define OMAP_HSMMC_WRITE(base, reg, val) \ |
| __raw_writel((val), (base) + OMAP_HSMMC_##reg) |
| |
| struct omap_hsmmc_host { |
| struct device *dev; |
| struct mmc_host *mmc; |
| struct mmc_request *mrq; |
| struct mmc_command *cmd; |
| struct mmc_data *data; |
| struct clk *fclk; |
| struct clk *iclk; |
| struct clk *dbclk; |
| /* |
| * vcc == configured supply |
| * vcc_aux == optional |
| * - MMC1, supply for DAT4..DAT7 |
| * - MMC2/MMC2, external level shifter voltage supply, for |
| * chip (SDIO, eMMC, etc) or transceiver (MMC2 only) |
| */ |
| struct regulator *vcc; |
| struct regulator *vcc_aux; |
| struct work_struct mmc_carddetect_work; |
| void __iomem *base; |
| resource_size_t mapbase; |
| spinlock_t irq_lock; /* Prevent races with irq handler */ |
| unsigned int id; |
| unsigned int dma_len; |
| unsigned int dma_sg_idx; |
| unsigned char bus_mode; |
| unsigned char power_mode; |
| u32 *buffer; |
| u32 bytesleft; |
| int suspended; |
| int irq; |
| int use_dma, dma_ch; |
| int dma_line_tx, dma_line_rx; |
| int slot_id; |
| int got_dbclk; |
| int response_busy; |
| int context_loss; |
| int dpm_state; |
| int vdd; |
| int protect_card; |
| int reqs_blocked; |
| int use_reg; |
| int req_in_progress; |
| |
| struct omap_mmc_platform_data *pdata; |
| }; |
| |
| static int omap_hsmmc_card_detect(struct device *dev, int slot) |
| { |
| struct omap_mmc_platform_data *mmc = dev->platform_data; |
| |
| /* NOTE: assumes card detect signal is active-low */ |
| return !gpio_get_value_cansleep(mmc->slots[0].switch_pin); |
| } |
| |
| static int omap_hsmmc_get_wp(struct device *dev, int slot) |
| { |
| struct omap_mmc_platform_data *mmc = dev->platform_data; |
| |
| /* NOTE: assumes write protect signal is active-high */ |
| return gpio_get_value_cansleep(mmc->slots[0].gpio_wp); |
| } |
| |
| static int omap_hsmmc_get_cover_state(struct device *dev, int slot) |
| { |
| struct omap_mmc_platform_data *mmc = dev->platform_data; |
| |
| /* NOTE: assumes card detect signal is active-low */ |
| return !gpio_get_value_cansleep(mmc->slots[0].switch_pin); |
| } |
| |
| #ifdef CONFIG_PM |
| |
| static int omap_hsmmc_suspend_cdirq(struct device *dev, int slot) |
| { |
| struct omap_mmc_platform_data *mmc = dev->platform_data; |
| |
| disable_irq(mmc->slots[0].card_detect_irq); |
| return 0; |
| } |
| |
| static int omap_hsmmc_resume_cdirq(struct device *dev, int slot) |
| { |
| struct omap_mmc_platform_data *mmc = dev->platform_data; |
| |
| enable_irq(mmc->slots[0].card_detect_irq); |
| return 0; |
| } |
| |
| #else |
| |
| #define omap_hsmmc_suspend_cdirq NULL |
| #define omap_hsmmc_resume_cdirq NULL |
| |
| #endif |
| |
| #ifdef CONFIG_REGULATOR |
| |
| static int omap_hsmmc_1_set_power(struct device *dev, int slot, int power_on, |
| int vdd) |
| { |
| struct omap_hsmmc_host *host = |
| platform_get_drvdata(to_platform_device(dev)); |
| int ret; |
| |
| if (mmc_slot(host).before_set_reg) |
| mmc_slot(host).before_set_reg(dev, slot, power_on, vdd); |
| |
| if (power_on) |
| ret = mmc_regulator_set_ocr(host->vcc, vdd); |
| else |
| ret = mmc_regulator_set_ocr(host->vcc, 0); |
| |
| if (mmc_slot(host).after_set_reg) |
| mmc_slot(host).after_set_reg(dev, slot, power_on, vdd); |
| |
| return ret; |
| } |
| |
| static int omap_hsmmc_23_set_power(struct device *dev, int slot, int power_on, |
| int vdd) |
| { |
| struct omap_hsmmc_host *host = |
| platform_get_drvdata(to_platform_device(dev)); |
| int ret = 0; |
| |
| /* |
| * If we don't see a Vcc regulator, assume it's a fixed |
| * voltage always-on regulator. |
| */ |
| if (!host->vcc) |
| return 0; |
| |
| if (mmc_slot(host).before_set_reg) |
| mmc_slot(host).before_set_reg(dev, slot, power_on, vdd); |
| |
| /* |
| * Assume Vcc regulator is used only to power the card ... OMAP |
| * VDDS is used to power the pins, optionally with a transceiver to |
| * support cards using voltages other than VDDS (1.8V nominal). When a |
| * transceiver is used, DAT3..7 are muxed as transceiver control pins. |
| * |
| * In some cases this regulator won't support enable/disable; |
| * e.g. it's a fixed rail for a WLAN chip. |
| * |
| * In other cases vcc_aux switches interface power. Example, for |
| * eMMC cards it represents VccQ. Sometimes transceivers or SDIO |
| * chips/cards need an interface voltage rail too. |
| */ |
| if (power_on) { |
| ret = mmc_regulator_set_ocr(host->vcc, vdd); |
| /* Enable interface voltage rail, if needed */ |
| if (ret == 0 && host->vcc_aux) { |
| ret = regulator_enable(host->vcc_aux); |
| if (ret < 0) |
| ret = mmc_regulator_set_ocr(host->vcc, 0); |
| } |
| } else { |
| if (host->vcc_aux) |
| ret = regulator_disable(host->vcc_aux); |
| if (ret == 0) |
| ret = mmc_regulator_set_ocr(host->vcc, 0); |
| } |
| |
| if (mmc_slot(host).after_set_reg) |
| mmc_slot(host).after_set_reg(dev, slot, power_on, vdd); |
| |
| return ret; |
| } |
| |
| static int omap_hsmmc_1_set_sleep(struct device *dev, int slot, int sleep, |
| int vdd, int cardsleep) |
| { |
| struct omap_hsmmc_host *host = |
| platform_get_drvdata(to_platform_device(dev)); |
| int mode = sleep ? REGULATOR_MODE_STANDBY : REGULATOR_MODE_NORMAL; |
| |
| return regulator_set_mode(host->vcc, mode); |
| } |
| |
| static int omap_hsmmc_23_set_sleep(struct device *dev, int slot, int sleep, |
| int vdd, int cardsleep) |
| { |
| struct omap_hsmmc_host *host = |
| platform_get_drvdata(to_platform_device(dev)); |
| int err, mode; |
| |
| /* |
| * If we don't see a Vcc regulator, assume it's a fixed |
| * voltage always-on regulator. |
| */ |
| if (!host->vcc) |
| return 0; |
| |
| mode = sleep ? REGULATOR_MODE_STANDBY : REGULATOR_MODE_NORMAL; |
| |
| if (!host->vcc_aux) |
| return regulator_set_mode(host->vcc, mode); |
| |
| if (cardsleep) { |
| /* VCC can be turned off if card is asleep */ |
| if (sleep) |
| err = mmc_regulator_set_ocr(host->vcc, 0); |
| else |
| err = mmc_regulator_set_ocr(host->vcc, vdd); |
| } else |
| err = regulator_set_mode(host->vcc, mode); |
| if (err) |
| return err; |
| |
| if (!mmc_slot(host).vcc_aux_disable_is_sleep) |
| return regulator_set_mode(host->vcc_aux, mode); |
| |
| if (sleep) |
| return regulator_disable(host->vcc_aux); |
| else |
| return regulator_enable(host->vcc_aux); |
| } |
| |
| static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host) |
| { |
| struct regulator *reg; |
| int ret = 0; |
| |
| switch (host->id) { |
| case OMAP_MMC1_DEVID: |
| /* On-chip level shifting via PBIAS0/PBIAS1 */ |
| mmc_slot(host).set_power = omap_hsmmc_1_set_power; |
| mmc_slot(host).set_sleep = omap_hsmmc_1_set_sleep; |
| break; |
| case OMAP_MMC2_DEVID: |
| case OMAP_MMC3_DEVID: |
| /* Off-chip level shifting, or none */ |
| mmc_slot(host).set_power = omap_hsmmc_23_set_power; |
| mmc_slot(host).set_sleep = omap_hsmmc_23_set_sleep; |
| break; |
| default: |
| pr_err("MMC%d configuration not supported!\n", host->id); |
| return -EINVAL; |
| } |
| |
| reg = regulator_get(host->dev, "vmmc"); |
| if (IS_ERR(reg)) { |
| dev_dbg(host->dev, "vmmc regulator missing\n"); |
| /* |
| * HACK: until fixed.c regulator is usable, |
| * we don't require a main regulator |
| * for MMC2 or MMC3 |
| */ |
| if (host->id == OMAP_MMC1_DEVID) { |
| ret = PTR_ERR(reg); |
| goto err; |
| } |
| } else { |
| host->vcc = reg; |
| mmc_slot(host).ocr_mask = mmc_regulator_get_ocrmask(reg); |
| |
| /* Allow an aux regulator */ |
| reg = regulator_get(host->dev, "vmmc_aux"); |
| host->vcc_aux = IS_ERR(reg) ? NULL : reg; |
| |
| /* |
| * UGLY HACK: workaround regulator framework bugs. |
| * When the bootloader leaves a supply active, it's |
| * initialized with zero usecount ... and we can't |
| * disable it without first enabling it. Until the |
| * framework is fixed, we need a workaround like this |
| * (which is safe for MMC, but not in general). |
| */ |
| if (regulator_is_enabled(host->vcc) > 0) { |
| regulator_enable(host->vcc); |
| regulator_disable(host->vcc); |
| } |
| if (host->vcc_aux) { |
| if (regulator_is_enabled(reg) > 0) { |
| regulator_enable(reg); |
| regulator_disable(reg); |
| } |
| } |
| } |
| |
| return 0; |
| |
| err: |
| mmc_slot(host).set_power = NULL; |
| mmc_slot(host).set_sleep = NULL; |
| return ret; |
| } |
| |
| static void omap_hsmmc_reg_put(struct omap_hsmmc_host *host) |
| { |
| regulator_put(host->vcc); |
| regulator_put(host->vcc_aux); |
| mmc_slot(host).set_power = NULL; |
| mmc_slot(host).set_sleep = NULL; |
| } |
| |
| static inline int omap_hsmmc_have_reg(void) |
| { |
| return 1; |
| } |
| |
| #else |
| |
| static inline int omap_hsmmc_reg_get(struct omap_hsmmc_host *host) |
| { |
| return -EINVAL; |
| } |
| |
| static inline void omap_hsmmc_reg_put(struct omap_hsmmc_host *host) |
| { |
| } |
| |
| static inline int omap_hsmmc_have_reg(void) |
| { |
| return 0; |
| } |
| |
| #endif |
| |
| static int omap_hsmmc_gpio_init(struct omap_mmc_platform_data *pdata) |
| { |
| int ret; |
| |
| if (gpio_is_valid(pdata->slots[0].switch_pin)) { |
| pdata->suspend = omap_hsmmc_suspend_cdirq; |
| pdata->resume = omap_hsmmc_resume_cdirq; |
| if (pdata->slots[0].cover) |
| pdata->slots[0].get_cover_state = |
| omap_hsmmc_get_cover_state; |
| else |
| pdata->slots[0].card_detect = omap_hsmmc_card_detect; |
| pdata->slots[0].card_detect_irq = |
| gpio_to_irq(pdata->slots[0].switch_pin); |
| ret = gpio_request(pdata->slots[0].switch_pin, "mmc_cd"); |
| if (ret) |
| return ret; |
| ret = gpio_direction_input(pdata->slots[0].switch_pin); |
| if (ret) |
| goto err_free_sp; |
| } else |
| pdata->slots[0].switch_pin = -EINVAL; |
| |
| if (gpio_is_valid(pdata->slots[0].gpio_wp)) { |
| pdata->slots[0].get_ro = omap_hsmmc_get_wp; |
| ret = gpio_request(pdata->slots[0].gpio_wp, "mmc_wp"); |
| if (ret) |
| goto err_free_cd; |
| ret = gpio_direction_input(pdata->slots[0].gpio_wp); |
| if (ret) |
| goto err_free_wp; |
| } else |
| pdata->slots[0].gpio_wp = -EINVAL; |
| |
| return 0; |
| |
| err_free_wp: |
| gpio_free(pdata->slots[0].gpio_wp); |
| err_free_cd: |
| if (gpio_is_valid(pdata->slots[0].switch_pin)) |
| err_free_sp: |
| gpio_free(pdata->slots[0].switch_pin); |
| return ret; |
| } |
| |
| static void omap_hsmmc_gpio_free(struct omap_mmc_platform_data *pdata) |
| { |
| if (gpio_is_valid(pdata->slots[0].gpio_wp)) |
| gpio_free(pdata->slots[0].gpio_wp); |
| if (gpio_is_valid(pdata->slots[0].switch_pin)) |
| gpio_free(pdata->slots[0].switch_pin); |
| } |
| |
| /* |
| * Stop clock to the card |
| */ |
| static void omap_hsmmc_stop_clock(struct omap_hsmmc_host *host) |
| { |
| OMAP_HSMMC_WRITE(host->base, SYSCTL, |
| OMAP_HSMMC_READ(host->base, SYSCTL) & ~CEN); |
| if ((OMAP_HSMMC_READ(host->base, SYSCTL) & CEN) != 0x0) |
| dev_dbg(mmc_dev(host->mmc), "MMC Clock is not stoped\n"); |
| } |
| |
| static void omap_hsmmc_enable_irq(struct omap_hsmmc_host *host) |
| { |
| unsigned int irq_mask; |
| |
| if (host->use_dma) |
| irq_mask = INT_EN_MASK & ~(BRR_ENABLE | BWR_ENABLE); |
| else |
| irq_mask = INT_EN_MASK; |
| |
| OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR); |
| OMAP_HSMMC_WRITE(host->base, ISE, irq_mask); |
| OMAP_HSMMC_WRITE(host->base, IE, irq_mask); |
| } |
| |
| static void omap_hsmmc_disable_irq(struct omap_hsmmc_host *host) |
| { |
| OMAP_HSMMC_WRITE(host->base, ISE, 0); |
| OMAP_HSMMC_WRITE(host->base, IE, 0); |
| OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR); |
| } |
| |
| #ifdef CONFIG_PM |
| |
| /* |
| * Restore the MMC host context, if it was lost as result of a |
| * power state change. |
| */ |
| static int omap_hsmmc_context_restore(struct omap_hsmmc_host *host) |
| { |
| struct mmc_ios *ios = &host->mmc->ios; |
| struct omap_mmc_platform_data *pdata = host->pdata; |
| int context_loss = 0; |
| u32 hctl, capa, con; |
| u16 dsor = 0; |
| unsigned long timeout; |
| |
| if (pdata->get_context_loss_count) { |
| context_loss = pdata->get_context_loss_count(host->dev); |
| if (context_loss < 0) |
| return 1; |
| } |
| |
| dev_dbg(mmc_dev(host->mmc), "context was %slost\n", |
| context_loss == host->context_loss ? "not " : ""); |
| if (host->context_loss == context_loss) |
| return 1; |
| |
| /* Wait for hardware reset */ |
| timeout = jiffies + msecs_to_jiffies(MMC_TIMEOUT_MS); |
| while ((OMAP_HSMMC_READ(host->base, SYSSTATUS) & RESETDONE) != RESETDONE |
| && time_before(jiffies, timeout)) |
| ; |
| |
| /* Do software reset */ |
| OMAP_HSMMC_WRITE(host->base, SYSCONFIG, SOFTRESET); |
| timeout = jiffies + msecs_to_jiffies(MMC_TIMEOUT_MS); |
| while ((OMAP_HSMMC_READ(host->base, SYSSTATUS) & RESETDONE) != RESETDONE |
| && time_before(jiffies, timeout)) |
| ; |
| |
| OMAP_HSMMC_WRITE(host->base, SYSCONFIG, |
| OMAP_HSMMC_READ(host->base, SYSCONFIG) | AUTOIDLE); |
| |
| if (host->id == OMAP_MMC1_DEVID) { |
| if (host->power_mode != MMC_POWER_OFF && |
| (1 << ios->vdd) <= MMC_VDD_23_24) |
| hctl = SDVS18; |
| else |
| hctl = SDVS30; |
| capa = VS30 | VS18; |
| } else { |
| hctl = SDVS18; |
| capa = VS18; |
| } |
| |
| OMAP_HSMMC_WRITE(host->base, HCTL, |
| OMAP_HSMMC_READ(host->base, HCTL) | hctl); |
| |
| OMAP_HSMMC_WRITE(host->base, CAPA, |
| OMAP_HSMMC_READ(host->base, CAPA) | capa); |
| |
| OMAP_HSMMC_WRITE(host->base, HCTL, |
| OMAP_HSMMC_READ(host->base, HCTL) | SDBP); |
| |
| timeout = jiffies + msecs_to_jiffies(MMC_TIMEOUT_MS); |
| while ((OMAP_HSMMC_READ(host->base, HCTL) & SDBP) != SDBP |
| && time_before(jiffies, timeout)) |
| ; |
| |
| omap_hsmmc_disable_irq(host); |
| |
| /* Do not initialize card-specific things if the power is off */ |
| if (host->power_mode == MMC_POWER_OFF) |
| goto out; |
| |
| con = OMAP_HSMMC_READ(host->base, CON); |
| switch (ios->bus_width) { |
| case MMC_BUS_WIDTH_8: |
| OMAP_HSMMC_WRITE(host->base, CON, con | DW8); |
| break; |
| case MMC_BUS_WIDTH_4: |
| OMAP_HSMMC_WRITE(host->base, CON, con & ~DW8); |
| OMAP_HSMMC_WRITE(host->base, HCTL, |
| OMAP_HSMMC_READ(host->base, HCTL) | FOUR_BIT); |
| break; |
| case MMC_BUS_WIDTH_1: |
| OMAP_HSMMC_WRITE(host->base, CON, con & ~DW8); |
| OMAP_HSMMC_WRITE(host->base, HCTL, |
| OMAP_HSMMC_READ(host->base, HCTL) & ~FOUR_BIT); |
| break; |
| } |
| |
| if (ios->clock) { |
| dsor = OMAP_MMC_MASTER_CLOCK / ios->clock; |
| if (dsor < 1) |
| dsor = 1; |
| |
| if (OMAP_MMC_MASTER_CLOCK / dsor > ios->clock) |
| dsor++; |
| |
| if (dsor > 250) |
| dsor = 250; |
| } |
| |
| OMAP_HSMMC_WRITE(host->base, SYSCTL, |
| OMAP_HSMMC_READ(host->base, SYSCTL) & ~CEN); |
| OMAP_HSMMC_WRITE(host->base, SYSCTL, (dsor << 6) | (DTO << 16)); |
| OMAP_HSMMC_WRITE(host->base, SYSCTL, |
| OMAP_HSMMC_READ(host->base, SYSCTL) | ICE); |
| |
| timeout = jiffies + msecs_to_jiffies(MMC_TIMEOUT_MS); |
| while ((OMAP_HSMMC_READ(host->base, SYSCTL) & ICS) != ICS |
| && time_before(jiffies, timeout)) |
| ; |
| |
| OMAP_HSMMC_WRITE(host->base, SYSCTL, |
| OMAP_HSMMC_READ(host->base, SYSCTL) | CEN); |
| |
| con = OMAP_HSMMC_READ(host->base, CON); |
| if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN) |
| OMAP_HSMMC_WRITE(host->base, CON, con | OD); |
| else |
| OMAP_HSMMC_WRITE(host->base, CON, con & ~OD); |
| out: |
| host->context_loss = context_loss; |
| |
| dev_dbg(mmc_dev(host->mmc), "context is restored\n"); |
| return 0; |
| } |
| |
| /* |
| * Save the MMC host context (store the number of power state changes so far). |
| */ |
| static void omap_hsmmc_context_save(struct omap_hsmmc_host *host) |
| { |
| struct omap_mmc_platform_data *pdata = host->pdata; |
| int context_loss; |
| |
| if (pdata->get_context_loss_count) { |
| context_loss = pdata->get_context_loss_count(host->dev); |
| if (context_loss < 0) |
| return; |
| host->context_loss = context_loss; |
| } |
| } |
| |
| #else |
| |
| static int omap_hsmmc_context_restore(struct omap_hsmmc_host *host) |
| { |
| return 0; |
| } |
| |
| static void omap_hsmmc_context_save(struct omap_hsmmc_host *host) |
| { |
| } |
| |
| #endif |
| |
| /* |
| * Send init stream sequence to card |
| * before sending IDLE command |
| */ |
| static void send_init_stream(struct omap_hsmmc_host *host) |
| { |
| int reg = 0; |
| unsigned long timeout; |
| |
| if (host->protect_card) |
| return; |
| |
| disable_irq(host->irq); |
| |
| OMAP_HSMMC_WRITE(host->base, IE, INT_EN_MASK); |
| OMAP_HSMMC_WRITE(host->base, CON, |
| OMAP_HSMMC_READ(host->base, CON) | INIT_STREAM); |
| OMAP_HSMMC_WRITE(host->base, CMD, INIT_STREAM_CMD); |
| |
| timeout = jiffies + msecs_to_jiffies(MMC_TIMEOUT_MS); |
| while ((reg != CC) && time_before(jiffies, timeout)) |
| reg = OMAP_HSMMC_READ(host->base, STAT) & CC; |
| |
| OMAP_HSMMC_WRITE(host->base, CON, |
| OMAP_HSMMC_READ(host->base, CON) & ~INIT_STREAM); |
| |
| OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR); |
| OMAP_HSMMC_READ(host->base, STAT); |
| |
| enable_irq(host->irq); |
| } |
| |
| static inline |
| int omap_hsmmc_cover_is_closed(struct omap_hsmmc_host *host) |
| { |
| int r = 1; |
| |
| if (mmc_slot(host).get_cover_state) |
| r = mmc_slot(host).get_cover_state(host->dev, host->slot_id); |
| return r; |
| } |
| |
| static ssize_t |
| omap_hsmmc_show_cover_switch(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct mmc_host *mmc = container_of(dev, struct mmc_host, class_dev); |
| struct omap_hsmmc_host *host = mmc_priv(mmc); |
| |
| return sprintf(buf, "%s\n", |
| omap_hsmmc_cover_is_closed(host) ? "closed" : "open"); |
| } |
| |
| static DEVICE_ATTR(cover_switch, S_IRUGO, omap_hsmmc_show_cover_switch, NULL); |
| |
| static ssize_t |
| omap_hsmmc_show_slot_name(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct mmc_host *mmc = container_of(dev, struct mmc_host, class_dev); |
| struct omap_hsmmc_host *host = mmc_priv(mmc); |
| |
| return sprintf(buf, "%s\n", mmc_slot(host).name); |
| } |
| |
| static DEVICE_ATTR(slot_name, S_IRUGO, omap_hsmmc_show_slot_name, NULL); |
| |
| /* |
| * Configure the response type and send the cmd. |
| */ |
| static void |
| omap_hsmmc_start_command(struct omap_hsmmc_host *host, struct mmc_command *cmd, |
| struct mmc_data *data) |
| { |
| int cmdreg = 0, resptype = 0, cmdtype = 0; |
| |
| dev_dbg(mmc_dev(host->mmc), "%s: CMD%d, argument 0x%08x\n", |
| mmc_hostname(host->mmc), cmd->opcode, cmd->arg); |
| host->cmd = cmd; |
| |
| omap_hsmmc_enable_irq(host); |
| |
| host->response_busy = 0; |
| if (cmd->flags & MMC_RSP_PRESENT) { |
| if (cmd->flags & MMC_RSP_136) |
| resptype = 1; |
| else if (cmd->flags & MMC_RSP_BUSY) { |
| resptype = 3; |
| host->response_busy = 1; |
| } else |
| resptype = 2; |
| } |
| |
| /* |
| * Unlike OMAP1 controller, the cmdtype does not seem to be based on |
| * ac, bc, adtc, bcr. Only commands ending an open ended transfer need |
| * a val of 0x3, rest 0x0. |
| */ |
| if (cmd == host->mrq->stop) |
| cmdtype = 0x3; |
| |
| cmdreg = (cmd->opcode << 24) | (resptype << 16) | (cmdtype << 22); |
| |
| if (data) { |
| cmdreg |= DP_SELECT | MSBS | BCE; |
| if (data->flags & MMC_DATA_READ) |
| cmdreg |= DDIR; |
| else |
| cmdreg &= ~(DDIR); |
| } |
| |
| if (host->use_dma) |
| cmdreg |= DMA_EN; |
| |
| host->req_in_progress = 1; |
| |
| OMAP_HSMMC_WRITE(host->base, ARG, cmd->arg); |
| OMAP_HSMMC_WRITE(host->base, CMD, cmdreg); |
| } |
| |
| static int |
| omap_hsmmc_get_dma_dir(struct omap_hsmmc_host *host, struct mmc_data *data) |
| { |
| if (data->flags & MMC_DATA_WRITE) |
| return DMA_TO_DEVICE; |
| else |
| return DMA_FROM_DEVICE; |
| } |
| |
| static void omap_hsmmc_request_done(struct omap_hsmmc_host *host, struct mmc_request *mrq) |
| { |
| int dma_ch; |
| |
| spin_lock(&host->irq_lock); |
| host->req_in_progress = 0; |
| dma_ch = host->dma_ch; |
| spin_unlock(&host->irq_lock); |
| |
| omap_hsmmc_disable_irq(host); |
| /* Do not complete the request if DMA is still in progress */ |
| if (mrq->data && host->use_dma && dma_ch != -1) |
| return; |
| host->mrq = NULL; |
| mmc_request_done(host->mmc, mrq); |
| } |
| |
| /* |
| * Notify the transfer complete to MMC core |
| */ |
| static void |
| omap_hsmmc_xfer_done(struct omap_hsmmc_host *host, struct mmc_data *data) |
| { |
| if (!data) { |
| struct mmc_request *mrq = host->mrq; |
| |
| /* TC before CC from CMD6 - don't know why, but it happens */ |
| if (host->cmd && host->cmd->opcode == 6 && |
| host->response_busy) { |
| host->response_busy = 0; |
| return; |
| } |
| |
| omap_hsmmc_request_done(host, mrq); |
| return; |
| } |
| |
| host->data = NULL; |
| |
| if (!data->error) |
| data->bytes_xfered += data->blocks * (data->blksz); |
| else |
| data->bytes_xfered = 0; |
| |
| if (!data->stop) { |
| omap_hsmmc_request_done(host, data->mrq); |
| return; |
| } |
| omap_hsmmc_start_command(host, data->stop, NULL); |
| } |
| |
| /* |
| * Notify the core about command completion |
| */ |
| static void |
| omap_hsmmc_cmd_done(struct omap_hsmmc_host *host, struct mmc_command *cmd) |
| { |
| host->cmd = NULL; |
| |
| if (cmd->flags & MMC_RSP_PRESENT) { |
| if (cmd->flags & MMC_RSP_136) { |
| /* response type 2 */ |
| cmd->resp[3] = OMAP_HSMMC_READ(host->base, RSP10); |
| cmd->resp[2] = OMAP_HSMMC_READ(host->base, RSP32); |
| cmd->resp[1] = OMAP_HSMMC_READ(host->base, RSP54); |
| cmd->resp[0] = OMAP_HSMMC_READ(host->base, RSP76); |
| } else { |
| /* response types 1, 1b, 3, 4, 5, 6 */ |
| cmd->resp[0] = OMAP_HSMMC_READ(host->base, RSP10); |
| } |
| } |
| if ((host->data == NULL && !host->response_busy) || cmd->error) |
| omap_hsmmc_request_done(host, cmd->mrq); |
| } |
| |
| /* |
| * DMA clean up for command errors |
| */ |
| static void omap_hsmmc_dma_cleanup(struct omap_hsmmc_host *host, int errno) |
| { |
| int dma_ch; |
| |
| host->data->error = errno; |
| |
| spin_lock(&host->irq_lock); |
| dma_ch = host->dma_ch; |
| host->dma_ch = -1; |
| spin_unlock(&host->irq_lock); |
| |
| if (host->use_dma && dma_ch != -1) { |
| dma_unmap_sg(mmc_dev(host->mmc), host->data->sg, host->dma_len, |
| omap_hsmmc_get_dma_dir(host, host->data)); |
| omap_free_dma(dma_ch); |
| } |
| host->data = NULL; |
| } |
| |
| /* |
| * Readable error output |
| */ |
| #ifdef CONFIG_MMC_DEBUG |
| static void omap_hsmmc_report_irq(struct omap_hsmmc_host *host, u32 status) |
| { |
| /* --- means reserved bit without definition at documentation */ |
| static const char *omap_hsmmc_status_bits[] = { |
| "CC", "TC", "BGE", "---", "BWR", "BRR", "---", "---", "CIRQ", |
| "OBI", "---", "---", "---", "---", "---", "ERRI", "CTO", "CCRC", |
| "CEB", "CIE", "DTO", "DCRC", "DEB", "---", "ACE", "---", |
| "---", "---", "---", "CERR", "CERR", "BADA", "---", "---", "---" |
| }; |
| char res[256]; |
| char *buf = res; |
| int len, i; |
| |
| len = sprintf(buf, "MMC IRQ 0x%x :", status); |
| buf += len; |
| |
| for (i = 0; i < ARRAY_SIZE(omap_hsmmc_status_bits); i++) |
| if (status & (1 << i)) { |
| len = sprintf(buf, " %s", omap_hsmmc_status_bits[i]); |
| buf += len; |
| } |
| |
| dev_dbg(mmc_dev(host->mmc), "%s\n", res); |
| } |
| #endif /* CONFIG_MMC_DEBUG */ |
| |
| /* |
| * MMC controller internal state machines reset |
| * |
| * Used to reset command or data internal state machines, using respectively |
| * SRC or SRD bit of SYSCTL register |
| * Can be called from interrupt context |
| */ |
| static inline void omap_hsmmc_reset_controller_fsm(struct omap_hsmmc_host *host, |
| unsigned long bit) |
| { |
| unsigned long i = 0; |
| unsigned long limit = (loops_per_jiffy * |
| msecs_to_jiffies(MMC_TIMEOUT_MS)); |
| |
| OMAP_HSMMC_WRITE(host->base, SYSCTL, |
| OMAP_HSMMC_READ(host->base, SYSCTL) | bit); |
| |
| while ((OMAP_HSMMC_READ(host->base, SYSCTL) & bit) && |
| (i++ < limit)) |
| cpu_relax(); |
| |
| if (OMAP_HSMMC_READ(host->base, SYSCTL) & bit) |
| dev_err(mmc_dev(host->mmc), |
| "Timeout waiting on controller reset in %s\n", |
| __func__); |
| } |
| |
| static void omap_hsmmc_do_irq(struct omap_hsmmc_host *host, int status) |
| { |
| struct mmc_data *data; |
| int end_cmd = 0, end_trans = 0; |
| |
| if (!host->req_in_progress) { |
| do { |
| OMAP_HSMMC_WRITE(host->base, STAT, status); |
| /* Flush posted write */ |
| status = OMAP_HSMMC_READ(host->base, STAT); |
| } while (status & INT_EN_MASK); |
| return; |
| } |
| |
| data = host->data; |
| dev_dbg(mmc_dev(host->mmc), "IRQ Status is %x\n", status); |
| |
| if (status & ERR) { |
| #ifdef CONFIG_MMC_DEBUG |
| omap_hsmmc_report_irq(host, status); |
| #endif |
| if ((status & CMD_TIMEOUT) || |
| (status & CMD_CRC)) { |
| if (host->cmd) { |
| if (status & CMD_TIMEOUT) { |
| omap_hsmmc_reset_controller_fsm(host, |
| SRC); |
| host->cmd->error = -ETIMEDOUT; |
| } else { |
| host->cmd->error = -EILSEQ; |
| } |
| end_cmd = 1; |
| } |
| if (host->data || host->response_busy) { |
| if (host->data) |
| omap_hsmmc_dma_cleanup(host, |
| -ETIMEDOUT); |
| host->response_busy = 0; |
| omap_hsmmc_reset_controller_fsm(host, SRD); |
| } |
| } |
| if ((status & DATA_TIMEOUT) || |
| (status & DATA_CRC)) { |
| if (host->data || host->response_busy) { |
| int err = (status & DATA_TIMEOUT) ? |
| -ETIMEDOUT : -EILSEQ; |
| |
| if (host->data) |
| omap_hsmmc_dma_cleanup(host, err); |
| else |
| host->mrq->cmd->error = err; |
| host->response_busy = 0; |
| omap_hsmmc_reset_controller_fsm(host, SRD); |
| end_trans = 1; |
| } |
| } |
| if (status & CARD_ERR) { |
| dev_dbg(mmc_dev(host->mmc), |
| "Ignoring card err CMD%d\n", host->cmd->opcode); |
| if (host->cmd) |
| end_cmd = 1; |
| if (host->data) |
| end_trans = 1; |
| } |
| } |
| |
| OMAP_HSMMC_WRITE(host->base, STAT, status); |
| |
| if (end_cmd || ((status & CC) && host->cmd)) |
| omap_hsmmc_cmd_done(host, host->cmd); |
| if ((end_trans || (status & TC)) && host->mrq) |
| omap_hsmmc_xfer_done(host, data); |
| } |
| |
| /* |
| * MMC controller IRQ handler |
| */ |
| static irqreturn_t omap_hsmmc_irq(int irq, void *dev_id) |
| { |
| struct omap_hsmmc_host *host = dev_id; |
| int status; |
| |
| status = OMAP_HSMMC_READ(host->base, STAT); |
| do { |
| omap_hsmmc_do_irq(host, status); |
| /* Flush posted write */ |
| status = OMAP_HSMMC_READ(host->base, STAT); |
| } while (status & INT_EN_MASK); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void set_sd_bus_power(struct omap_hsmmc_host *host) |
| { |
| unsigned long i; |
| |
| OMAP_HSMMC_WRITE(host->base, HCTL, |
| OMAP_HSMMC_READ(host->base, HCTL) | SDBP); |
| for (i = 0; i < loops_per_jiffy; i++) { |
| if (OMAP_HSMMC_READ(host->base, HCTL) & SDBP) |
| break; |
| cpu_relax(); |
| } |
| } |
| |
| /* |
| * Switch MMC interface voltage ... only relevant for MMC1. |
| * |
| * MMC2 and MMC3 use fixed 1.8V levels, and maybe a transceiver. |
| * The MMC2 transceiver controls are used instead of DAT4..DAT7. |
| * Some chips, like eMMC ones, use internal transceivers. |
| */ |
| static int omap_hsmmc_switch_opcond(struct omap_hsmmc_host *host, int vdd) |
| { |
| u32 reg_val = 0; |
| int ret; |
| |
| /* Disable the clocks */ |
| clk_disable(host->fclk); |
| clk_disable(host->iclk); |
| if (host->got_dbclk) |
| clk_disable(host->dbclk); |
| |
| /* Turn the power off */ |
| ret = mmc_slot(host).set_power(host->dev, host->slot_id, 0, 0); |
| |
| /* Turn the power ON with given VDD 1.8 or 3.0v */ |
| if (!ret) |
| ret = mmc_slot(host).set_power(host->dev, host->slot_id, 1, |
| vdd); |
| clk_enable(host->iclk); |
| clk_enable(host->fclk); |
| if (host->got_dbclk) |
| clk_enable(host->dbclk); |
| |
| if (ret != 0) |
| goto err; |
| |
| OMAP_HSMMC_WRITE(host->base, HCTL, |
| OMAP_HSMMC_READ(host->base, HCTL) & SDVSCLR); |
| reg_val = OMAP_HSMMC_READ(host->base, HCTL); |
| |
| /* |
| * If a MMC dual voltage card is detected, the set_ios fn calls |
| * this fn with VDD bit set for 1.8V. Upon card removal from the |
| * slot, omap_hsmmc_set_ios sets the VDD back to 3V on MMC_POWER_OFF. |
| * |
| * Cope with a bit of slop in the range ... per data sheets: |
| * - "1.8V" for vdds_mmc1/vdds_mmc1a can be up to 2.45V max, |
| * but recommended values are 1.71V to 1.89V |
| * - "3.0V" for vdds_mmc1/vdds_mmc1a can be up to 3.5V max, |
| * but recommended values are 2.7V to 3.3V |
| * |
| * Board setup code shouldn't permit anything very out-of-range. |
| * TWL4030-family VMMC1 and VSIM regulators are fine (avoiding the |
| * middle range) but VSIM can't power DAT4..DAT7 at more than 3V. |
| */ |
| if ((1 << vdd) <= MMC_VDD_23_24) |
| reg_val |= SDVS18; |
| else |
| reg_val |= SDVS30; |
| |
| OMAP_HSMMC_WRITE(host->base, HCTL, reg_val); |
| set_sd_bus_power(host); |
| |
| return 0; |
| err: |
| dev_dbg(mmc_dev(host->mmc), "Unable to switch operating voltage\n"); |
| return ret; |
| } |
| |
| /* Protect the card while the cover is open */ |
| static void omap_hsmmc_protect_card(struct omap_hsmmc_host *host) |
| { |
| if (!mmc_slot(host).get_cover_state) |
| return; |
| |
| host->reqs_blocked = 0; |
| if (mmc_slot(host).get_cover_state(host->dev, host->slot_id)) { |
| if (host->protect_card) { |
| printk(KERN_INFO "%s: cover is closed, " |
| "card is now accessible\n", |
| mmc_hostname(host->mmc)); |
| host->protect_card = 0; |
| } |
| } else { |
| if (!host->protect_card) { |
| printk(KERN_INFO "%s: cover is open, " |
| "card is now inaccessible\n", |
| mmc_hostname(host->mmc)); |
| host->protect_card = 1; |
| } |
| } |
| } |
| |
| /* |
| * Work Item to notify the core about card insertion/removal |
| */ |
| static void omap_hsmmc_detect(struct work_struct *work) |
| { |
| struct omap_hsmmc_host *host = |
| container_of(work, struct omap_hsmmc_host, mmc_carddetect_work); |
| struct omap_mmc_slot_data *slot = &mmc_slot(host); |
| int carddetect; |
| |
| if (host->suspended) |
| return; |
| |
| sysfs_notify(&host->mmc->class_dev.kobj, NULL, "cover_switch"); |
| |
| if (slot->card_detect) |
| carddetect = slot->card_detect(host->dev, host->slot_id); |
| else { |
| omap_hsmmc_protect_card(host); |
| carddetect = -ENOSYS; |
| } |
| |
| if (carddetect) |
| mmc_detect_change(host->mmc, (HZ * 200) / 1000); |
| else |
| mmc_detect_change(host->mmc, (HZ * 50) / 1000); |
| } |
| |
| /* |
| * ISR for handling card insertion and removal |
| */ |
| static irqreturn_t omap_hsmmc_cd_handler(int irq, void *dev_id) |
| { |
| struct omap_hsmmc_host *host = (struct omap_hsmmc_host *)dev_id; |
| |
| if (host->suspended) |
| return IRQ_HANDLED; |
| schedule_work(&host->mmc_carddetect_work); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int omap_hsmmc_get_dma_sync_dev(struct omap_hsmmc_host *host, |
| struct mmc_data *data) |
| { |
| int sync_dev; |
| |
| if (data->flags & MMC_DATA_WRITE) |
| sync_dev = host->dma_line_tx; |
| else |
| sync_dev = host->dma_line_rx; |
| return sync_dev; |
| } |
| |
| static void omap_hsmmc_config_dma_params(struct omap_hsmmc_host *host, |
| struct mmc_data *data, |
| struct scatterlist *sgl) |
| { |
| int blksz, nblk, dma_ch; |
| |
| dma_ch = host->dma_ch; |
| if (data->flags & MMC_DATA_WRITE) { |
| omap_set_dma_dest_params(dma_ch, 0, OMAP_DMA_AMODE_CONSTANT, |
| (host->mapbase + OMAP_HSMMC_DATA), 0, 0); |
| omap_set_dma_src_params(dma_ch, 0, OMAP_DMA_AMODE_POST_INC, |
| sg_dma_address(sgl), 0, 0); |
| } else { |
| omap_set_dma_src_params(dma_ch, 0, OMAP_DMA_AMODE_CONSTANT, |
| (host->mapbase + OMAP_HSMMC_DATA), 0, 0); |
| omap_set_dma_dest_params(dma_ch, 0, OMAP_DMA_AMODE_POST_INC, |
| sg_dma_address(sgl), 0, 0); |
| } |
| |
| blksz = host->data->blksz; |
| nblk = sg_dma_len(sgl) / blksz; |
| |
| omap_set_dma_transfer_params(dma_ch, OMAP_DMA_DATA_TYPE_S32, |
| blksz / 4, nblk, OMAP_DMA_SYNC_FRAME, |
| omap_hsmmc_get_dma_sync_dev(host, data), |
| !(data->flags & MMC_DATA_WRITE)); |
| |
| omap_start_dma(dma_ch); |
| } |
| |
| /* |
| * DMA call back function |
| */ |
| static void omap_hsmmc_dma_cb(int lch, u16 ch_status, void *cb_data) |
| { |
| struct omap_hsmmc_host *host = cb_data; |
| struct mmc_data *data = host->mrq->data; |
| int dma_ch, req_in_progress; |
| |
| if (ch_status & OMAP2_DMA_MISALIGNED_ERR_IRQ) |
| dev_dbg(mmc_dev(host->mmc), "MISALIGNED_ADRS_ERR\n"); |
| |
| spin_lock(&host->irq_lock); |
| if (host->dma_ch < 0) { |
| spin_unlock(&host->irq_lock); |
| return; |
| } |
| |
| host->dma_sg_idx++; |
| if (host->dma_sg_idx < host->dma_len) { |
| /* Fire up the next transfer. */ |
| omap_hsmmc_config_dma_params(host, data, |
| data->sg + host->dma_sg_idx); |
| spin_unlock(&host->irq_lock); |
| return; |
| } |
| |
| dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->dma_len, |
| omap_hsmmc_get_dma_dir(host, data)); |
| |
| req_in_progress = host->req_in_progress; |
| dma_ch = host->dma_ch; |
| host->dma_ch = -1; |
| spin_unlock(&host->irq_lock); |
| |
| omap_free_dma(dma_ch); |
| |
| /* If DMA has finished after TC, complete the request */ |
| if (!req_in_progress) { |
| struct mmc_request *mrq = host->mrq; |
| |
| host->mrq = NULL; |
| mmc_request_done(host->mmc, mrq); |
| } |
| } |
| |
| /* |
| * Routine to configure and start DMA for the MMC card |
| */ |
| static int omap_hsmmc_start_dma_transfer(struct omap_hsmmc_host *host, |
| struct mmc_request *req) |
| { |
| int dma_ch = 0, ret = 0, i; |
| struct mmc_data *data = req->data; |
| |
| /* Sanity check: all the SG entries must be aligned by block size. */ |
| for (i = 0; i < data->sg_len; i++) { |
| struct scatterlist *sgl; |
| |
| sgl = data->sg + i; |
| if (sgl->length % data->blksz) |
| return -EINVAL; |
| } |
| if ((data->blksz % 4) != 0) |
| /* REVISIT: The MMC buffer increments only when MSB is written. |
| * Return error for blksz which is non multiple of four. |
| */ |
| return -EINVAL; |
| |
| BUG_ON(host->dma_ch != -1); |
| |
| ret = omap_request_dma(omap_hsmmc_get_dma_sync_dev(host, data), |
| "MMC/SD", omap_hsmmc_dma_cb, host, &dma_ch); |
| if (ret != 0) { |
| dev_err(mmc_dev(host->mmc), |
| "%s: omap_request_dma() failed with %d\n", |
| mmc_hostname(host->mmc), ret); |
| return ret; |
| } |
| |
| host->dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg, |
| data->sg_len, omap_hsmmc_get_dma_dir(host, data)); |
| host->dma_ch = dma_ch; |
| host->dma_sg_idx = 0; |
| |
| omap_hsmmc_config_dma_params(host, data, data->sg); |
| |
| return 0; |
| } |
| |
| static void set_data_timeout(struct omap_hsmmc_host *host, |
| unsigned int timeout_ns, |
| unsigned int timeout_clks) |
| { |
| unsigned int timeout, cycle_ns; |
| uint32_t reg, clkd, dto = 0; |
| |
| reg = OMAP_HSMMC_READ(host->base, SYSCTL); |
| clkd = (reg & CLKD_MASK) >> CLKD_SHIFT; |
| if (clkd == 0) |
| clkd = 1; |
| |
| cycle_ns = 1000000000 / (clk_get_rate(host->fclk) / clkd); |
| timeout = timeout_ns / cycle_ns; |
| timeout += timeout_clks; |
| if (timeout) { |
| while ((timeout & 0x80000000) == 0) { |
| dto += 1; |
| timeout <<= 1; |
| } |
| dto = 31 - dto; |
| timeout <<= 1; |
| if (timeout && dto) |
| dto += 1; |
| if (dto >= 13) |
| dto -= 13; |
| else |
| dto = 0; |
| if (dto > 14) |
| dto = 14; |
| } |
| |
| reg &= ~DTO_MASK; |
| reg |= dto << DTO_SHIFT; |
| OMAP_HSMMC_WRITE(host->base, SYSCTL, reg); |
| } |
| |
| /* |
| * Configure block length for MMC/SD cards and initiate the transfer. |
| */ |
| static int |
| omap_hsmmc_prepare_data(struct omap_hsmmc_host *host, struct mmc_request *req) |
| { |
| int ret; |
| host->data = req->data; |
| |
| if (req->data == NULL) { |
| OMAP_HSMMC_WRITE(host->base, BLK, 0); |
| /* |
| * Set an arbitrary 100ms data timeout for commands with |
| * busy signal. |
| */ |
| if (req->cmd->flags & MMC_RSP_BUSY) |
| set_data_timeout(host, 100000000U, 0); |
| return 0; |
| } |
| |
| OMAP_HSMMC_WRITE(host->base, BLK, (req->data->blksz) |
| | (req->data->blocks << 16)); |
| set_data_timeout(host, req->data->timeout_ns, req->data->timeout_clks); |
| |
| if (host->use_dma) { |
| ret = omap_hsmmc_start_dma_transfer(host, req); |
| if (ret != 0) { |
| dev_dbg(mmc_dev(host->mmc), "MMC start dma failure\n"); |
| return ret; |
| } |
| } |
| return 0; |
| } |
| |
| /* |
| * Request function. for read/write operation |
| */ |
| static void omap_hsmmc_request(struct mmc_host *mmc, struct mmc_request *req) |
| { |
| struct omap_hsmmc_host *host = mmc_priv(mmc); |
| int err; |
| |
| BUG_ON(host->req_in_progress); |
| BUG_ON(host->dma_ch != -1); |
| if (host->protect_card) { |
| if (host->reqs_blocked < 3) { |
| /* |
| * Ensure the controller is left in a consistent |
| * state by resetting the command and data state |
| * machines. |
| */ |
| omap_hsmmc_reset_controller_fsm(host, SRD); |
| omap_hsmmc_reset_controller_fsm(host, SRC); |
| host->reqs_blocked += 1; |
| } |
| req->cmd->error = -EBADF; |
| if (req->data) |
| req->data->error = -EBADF; |
| req->cmd->retries = 0; |
| mmc_request_done(mmc, req); |
| return; |
| } else if (host->reqs_blocked) |
| host->reqs_blocked = 0; |
| WARN_ON(host->mrq != NULL); |
| host->mrq = req; |
| err = omap_hsmmc_prepare_data(host, req); |
| if (err) { |
| req->cmd->error = err; |
| if (req->data) |
| req->data->error = err; |
| host->mrq = NULL; |
| mmc_request_done(mmc, req); |
| return; |
| } |
| |
| omap_hsmmc_start_command(host, req->cmd, req->data); |
| } |
| |
| /* Routine to configure clock values. Exposed API to core */ |
| static void omap_hsmmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) |
| { |
| struct omap_hsmmc_host *host = mmc_priv(mmc); |
| u16 dsor = 0; |
| unsigned long regval; |
| unsigned long timeout; |
| u32 con; |
| int do_send_init_stream = 0; |
| |
| mmc_host_enable(host->mmc); |
| |
| if (ios->power_mode != host->power_mode) { |
| switch (ios->power_mode) { |
| case MMC_POWER_OFF: |
| mmc_slot(host).set_power(host->dev, host->slot_id, |
| 0, 0); |
| host->vdd = 0; |
| break; |
| case MMC_POWER_UP: |
| mmc_slot(host).set_power(host->dev, host->slot_id, |
| 1, ios->vdd); |
| host->vdd = ios->vdd; |
| break; |
| case MMC_POWER_ON: |
| do_send_init_stream = 1; |
| break; |
| } |
| host->power_mode = ios->power_mode; |
| } |
| |
| /* FIXME: set registers based only on changes to ios */ |
| |
| con = OMAP_HSMMC_READ(host->base, CON); |
| switch (mmc->ios.bus_width) { |
| case MMC_BUS_WIDTH_8: |
| OMAP_HSMMC_WRITE(host->base, CON, con | DW8); |
| break; |
| case MMC_BUS_WIDTH_4: |
| OMAP_HSMMC_WRITE(host->base, CON, con & ~DW8); |
| OMAP_HSMMC_WRITE(host->base, HCTL, |
| OMAP_HSMMC_READ(host->base, HCTL) | FOUR_BIT); |
| break; |
| case MMC_BUS_WIDTH_1: |
| OMAP_HSMMC_WRITE(host->base, CON, con & ~DW8); |
| OMAP_HSMMC_WRITE(host->base, HCTL, |
| OMAP_HSMMC_READ(host->base, HCTL) & ~FOUR_BIT); |
| break; |
| } |
| |
| if (host->id == OMAP_MMC1_DEVID) { |
| /* Only MMC1 can interface at 3V without some flavor |
| * of external transceiver; but they all handle 1.8V. |
| */ |
| if ((OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET) && |
| (ios->vdd == DUAL_VOLT_OCR_BIT)) { |
| /* |
| * The mmc_select_voltage fn of the core does |
| * not seem to set the power_mode to |
| * MMC_POWER_UP upon recalculating the voltage. |
| * vdd 1.8v. |
| */ |
| if (omap_hsmmc_switch_opcond(host, ios->vdd) != 0) |
| dev_dbg(mmc_dev(host->mmc), |
| "Switch operation failed\n"); |
| } |
| } |
| |
| if (ios->clock) { |
| dsor = OMAP_MMC_MASTER_CLOCK / ios->clock; |
| if (dsor < 1) |
| dsor = 1; |
| |
| if (OMAP_MMC_MASTER_CLOCK / dsor > ios->clock) |
| dsor++; |
| |
| if (dsor > 250) |
| dsor = 250; |
| } |
| omap_hsmmc_stop_clock(host); |
| regval = OMAP_HSMMC_READ(host->base, SYSCTL); |
| regval = regval & ~(CLKD_MASK); |
| regval = regval | (dsor << 6) | (DTO << 16); |
| OMAP_HSMMC_WRITE(host->base, SYSCTL, regval); |
| OMAP_HSMMC_WRITE(host->base, SYSCTL, |
| OMAP_HSMMC_READ(host->base, SYSCTL) | ICE); |
| |
| /* Wait till the ICS bit is set */ |
| timeout = jiffies + msecs_to_jiffies(MMC_TIMEOUT_MS); |
| while ((OMAP_HSMMC_READ(host->base, SYSCTL) & ICS) != ICS |
| && time_before(jiffies, timeout)) |
| msleep(1); |
| |
| OMAP_HSMMC_WRITE(host->base, SYSCTL, |
| OMAP_HSMMC_READ(host->base, SYSCTL) | CEN); |
| |
| if (do_send_init_stream) |
| send_init_stream(host); |
| |
| con = OMAP_HSMMC_READ(host->base, CON); |
| if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN) |
| OMAP_HSMMC_WRITE(host->base, CON, con | OD); |
| else |
| OMAP_HSMMC_WRITE(host->base, CON, con & ~OD); |
| |
| if (host->power_mode == MMC_POWER_OFF) |
| mmc_host_disable(host->mmc); |
| else |
| mmc_host_lazy_disable(host->mmc); |
| } |
| |
| static int omap_hsmmc_get_cd(struct mmc_host *mmc) |
| { |
| struct omap_hsmmc_host *host = mmc_priv(mmc); |
| |
| if (!mmc_slot(host).card_detect) |
| return -ENOSYS; |
| return mmc_slot(host).card_detect(host->dev, host->slot_id); |
| } |
| |
| static int omap_hsmmc_get_ro(struct mmc_host *mmc) |
| { |
| struct omap_hsmmc_host *host = mmc_priv(mmc); |
| |
| if (!mmc_slot(host).get_ro) |
| return -ENOSYS; |
| return mmc_slot(host).get_ro(host->dev, 0); |
| } |
| |
| static void omap_hsmmc_conf_bus_power(struct omap_hsmmc_host *host) |
| { |
| u32 hctl, capa, value; |
| |
| /* Only MMC1 supports 3.0V */ |
| if (host->id == OMAP_MMC1_DEVID) { |
| hctl = SDVS30; |
| capa = VS30 | VS18; |
| } else { |
| hctl = SDVS18; |
| capa = VS18; |
| } |
| |
| value = OMAP_HSMMC_READ(host->base, HCTL) & ~SDVS_MASK; |
| OMAP_HSMMC_WRITE(host->base, HCTL, value | hctl); |
| |
| value = OMAP_HSMMC_READ(host->base, CAPA); |
| OMAP_HSMMC_WRITE(host->base, CAPA, value | capa); |
| |
| /* Set the controller to AUTO IDLE mode */ |
| value = OMAP_HSMMC_READ(host->base, SYSCONFIG); |
| OMAP_HSMMC_WRITE(host->base, SYSCONFIG, value | AUTOIDLE); |
| |
| /* Set SD bus power bit */ |
| set_sd_bus_power(host); |
| } |
| |
| /* |
| * Dynamic power saving handling, FSM: |
| * ENABLED -> DISABLED -> CARDSLEEP / REGSLEEP -> OFF |
| * ^___________| | | |
| * |______________________|______________________| |
| * |
| * ENABLED: mmc host is fully functional |
| * DISABLED: fclk is off |
| * CARDSLEEP: fclk is off, card is asleep, voltage regulator is asleep |
| * REGSLEEP: fclk is off, voltage regulator is asleep |
| * OFF: fclk is off, voltage regulator is off |
| * |
| * Transition handlers return the timeout for the next state transition |
| * or negative error. |
| */ |
| |
| enum {ENABLED = 0, DISABLED, CARDSLEEP, REGSLEEP, OFF}; |
| |
| /* Handler for [ENABLED -> DISABLED] transition */ |
| static int omap_hsmmc_enabled_to_disabled(struct omap_hsmmc_host *host) |
| { |
| omap_hsmmc_context_save(host); |
| clk_disable(host->fclk); |
| host->dpm_state = DISABLED; |
| |
| dev_dbg(mmc_dev(host->mmc), "ENABLED -> DISABLED\n"); |
| |
| if (host->power_mode == MMC_POWER_OFF) |
| return 0; |
| |
| return OMAP_MMC_SLEEP_TIMEOUT; |
| } |
| |
| /* Handler for [DISABLED -> REGSLEEP / CARDSLEEP] transition */ |
| static int omap_hsmmc_disabled_to_sleep(struct omap_hsmmc_host *host) |
| { |
| int err, new_state; |
| |
| if (!mmc_try_claim_host(host->mmc)) |
| return 0; |
| |
| clk_enable(host->fclk); |
| omap_hsmmc_context_restore(host); |
| if (mmc_card_can_sleep(host->mmc)) { |
| err = mmc_card_sleep(host->mmc); |
| if (err < 0) { |
| clk_disable(host->fclk); |
| mmc_release_host(host->mmc); |
| return err; |
| } |
| new_state = CARDSLEEP; |
| } else { |
| new_state = REGSLEEP; |
| } |
| if (mmc_slot(host).set_sleep) |
| mmc_slot(host).set_sleep(host->dev, host->slot_id, 1, 0, |
| new_state == CARDSLEEP); |
| /* FIXME: turn off bus power and perhaps interrupts too */ |
| clk_disable(host->fclk); |
| host->dpm_state = new_state; |
| |
| mmc_release_host(host->mmc); |
| |
| dev_dbg(mmc_dev(host->mmc), "DISABLED -> %s\n", |
| host->dpm_state == CARDSLEEP ? "CARDSLEEP" : "REGSLEEP"); |
| |
| if (mmc_slot(host).no_off) |
| return 0; |
| |
| if ((host->mmc->caps & MMC_CAP_NONREMOVABLE) || |
| mmc_slot(host).card_detect || |
| (mmc_slot(host).get_cover_state && |
| mmc_slot(host).get_cover_state(host->dev, host->slot_id))) |
| return OMAP_MMC_OFF_TIMEOUT; |
| |
| return 0; |
| } |
| |
| /* Handler for [REGSLEEP / CARDSLEEP -> OFF] transition */ |
| static int omap_hsmmc_sleep_to_off(struct omap_hsmmc_host *host) |
| { |
| if (!mmc_try_claim_host(host->mmc)) |
| return 0; |
| |
| if (mmc_slot(host).no_off) |
| return 0; |
| |
| if (!((host->mmc->caps & MMC_CAP_NONREMOVABLE) || |
| mmc_slot(host).card_detect || |
| (mmc_slot(host).get_cover_state && |
| mmc_slot(host).get_cover_state(host->dev, host->slot_id)))) { |
| mmc_release_host(host->mmc); |
| return 0; |
| } |
| |
| mmc_slot(host).set_power(host->dev, host->slot_id, 0, 0); |
| host->vdd = 0; |
| host->power_mode = MMC_POWER_OFF; |
| |
| dev_dbg(mmc_dev(host->mmc), "%s -> OFF\n", |
| host->dpm_state == CARDSLEEP ? "CARDSLEEP" : "REGSLEEP"); |
| |
| host->dpm_state = OFF; |
| |
| mmc_release_host(host->mmc); |
| |
| return 0; |
| } |
| |
| /* Handler for [DISABLED -> ENABLED] transition */ |
| static int omap_hsmmc_disabled_to_enabled(struct omap_hsmmc_host *host) |
| { |
| int err; |
| |
| err = clk_enable(host->fclk); |
| if (err < 0) |
| return err; |
| |
| omap_hsmmc_context_restore(host); |
| host->dpm_state = ENABLED; |
| |
| dev_dbg(mmc_dev(host->mmc), "DISABLED -> ENABLED\n"); |
| |
| return 0; |
| } |
| |
| /* Handler for [SLEEP -> ENABLED] transition */ |
| static int omap_hsmmc_sleep_to_enabled(struct omap_hsmmc_host *host) |
| { |
| if (!mmc_try_claim_host(host->mmc)) |
| return 0; |
| |
| clk_enable(host->fclk); |
| omap_hsmmc_context_restore(host); |
| if (mmc_slot(host).set_sleep) |
| mmc_slot(host).set_sleep(host->dev, host->slot_id, 0, |
| host->vdd, host->dpm_state == CARDSLEEP); |
| if (mmc_card_can_sleep(host->mmc)) |
| mmc_card_awake(host->mmc); |
| |
| dev_dbg(mmc_dev(host->mmc), "%s -> ENABLED\n", |
| host->dpm_state == CARDSLEEP ? "CARDSLEEP" : "REGSLEEP"); |
| |
| host->dpm_state = ENABLED; |
| |
| mmc_release_host(host->mmc); |
| |
| return 0; |
| } |
| |
| /* Handler for [OFF -> ENABLED] transition */ |
| static int omap_hsmmc_off_to_enabled(struct omap_hsmmc_host *host) |
| { |
| clk_enable(host->fclk); |
| |
| omap_hsmmc_context_restore(host); |
| omap_hsmmc_conf_bus_power(host); |
| mmc_power_restore_host(host->mmc); |
| |
| host->dpm_state = ENABLED; |
| |
| dev_dbg(mmc_dev(host->mmc), "OFF -> ENABLED\n"); |
| |
| return 0; |
| } |
| |
| /* |
| * Bring MMC host to ENABLED from any other PM state. |
| */ |
| static int omap_hsmmc_enable(struct mmc_host *mmc) |
| { |
| struct omap_hsmmc_host *host = mmc_priv(mmc); |
| |
| switch (host->dpm_state) { |
| case DISABLED: |
| return omap_hsmmc_disabled_to_enabled(host); |
| case CARDSLEEP: |
| case REGSLEEP: |
| return omap_hsmmc_sleep_to_enabled(host); |
| case OFF: |
| return omap_hsmmc_off_to_enabled(host); |
| default: |
| dev_dbg(mmc_dev(host->mmc), "UNKNOWN state\n"); |
| return -EINVAL; |
| } |
| } |
| |
| /* |
| * Bring MMC host in PM state (one level deeper). |
| */ |
| static int omap_hsmmc_disable(struct mmc_host *mmc, int lazy) |
| { |
| struct omap_hsmmc_host *host = mmc_priv(mmc); |
| |
| switch (host->dpm_state) { |
| case ENABLED: { |
| int delay; |
| |
| delay = omap_hsmmc_enabled_to_disabled(host); |
| if (lazy || delay < 0) |
| return delay; |
| return 0; |
| } |
| case DISABLED: |
| return omap_hsmmc_disabled_to_sleep(host); |
| case CARDSLEEP: |
| case REGSLEEP: |
| return omap_hsmmc_sleep_to_off(host); |
| default: |
| dev_dbg(mmc_dev(host->mmc), "UNKNOWN state\n"); |
| return -EINVAL; |
| } |
| } |
| |
| static int omap_hsmmc_enable_fclk(struct mmc_host *mmc) |
| { |
| struct omap_hsmmc_host *host = mmc_priv(mmc); |
| int err; |
| |
| err = clk_enable(host->fclk); |
| if (err) |
| return err; |
| dev_dbg(mmc_dev(host->mmc), "mmc_fclk: enabled\n"); |
| omap_hsmmc_context_restore(host); |
| return 0; |
| } |
| |
| static int omap_hsmmc_disable_fclk(struct mmc_host *mmc, int lazy) |
| { |
| struct omap_hsmmc_host *host = mmc_priv(mmc); |
| |
| omap_hsmmc_context_save(host); |
| clk_disable(host->fclk); |
| dev_dbg(mmc_dev(host->mmc), "mmc_fclk: disabled\n"); |
| return 0; |
| } |
| |
| static const struct mmc_host_ops omap_hsmmc_ops = { |
| .enable = omap_hsmmc_enable_fclk, |
| .disable = omap_hsmmc_disable_fclk, |
| .request = omap_hsmmc_request, |
| .set_ios = omap_hsmmc_set_ios, |
| .get_cd = omap_hsmmc_get_cd, |
| .get_ro = omap_hsmmc_get_ro, |
| /* NYET -- enable_sdio_irq */ |
| }; |
| |
| static const struct mmc_host_ops omap_hsmmc_ps_ops = { |
| .enable = omap_hsmmc_enable, |
| .disable = omap_hsmmc_disable, |
| .request = omap_hsmmc_request, |
| .set_ios = omap_hsmmc_set_ios, |
| .get_cd = omap_hsmmc_get_cd, |
| .get_ro = omap_hsmmc_get_ro, |
| /* NYET -- enable_sdio_irq */ |
| }; |
| |
| #ifdef CONFIG_DEBUG_FS |
| |
| static int omap_hsmmc_regs_show(struct seq_file *s, void *data) |
| { |
| struct mmc_host *mmc = s->private; |
| struct omap_hsmmc_host *host = mmc_priv(mmc); |
| int context_loss = 0; |
| |
| if (host->pdata->get_context_loss_count) |
| context_loss = host->pdata->get_context_loss_count(host->dev); |
| |
| seq_printf(s, "mmc%d:\n" |
| " enabled:\t%d\n" |
| " dpm_state:\t%d\n" |
| " nesting_cnt:\t%d\n" |
| " ctx_loss:\t%d:%d\n" |
| "\nregs:\n", |
| mmc->index, mmc->enabled ? 1 : 0, |
| host->dpm_state, mmc->nesting_cnt, |
| host->context_loss, context_loss); |
| |
| if (host->suspended || host->dpm_state == OFF) { |
| seq_printf(s, "host suspended, can't read registers\n"); |
| return 0; |
| } |
| |
| if (clk_enable(host->fclk) != 0) { |
| seq_printf(s, "can't read the regs\n"); |
| return 0; |
| } |
| |
| seq_printf(s, "SYSCONFIG:\t0x%08x\n", |
| OMAP_HSMMC_READ(host->base, SYSCONFIG)); |
| seq_printf(s, "CON:\t\t0x%08x\n", |
| OMAP_HSMMC_READ(host->base, CON)); |
| seq_printf(s, "HCTL:\t\t0x%08x\n", |
| OMAP_HSMMC_READ(host->base, HCTL)); |
| seq_printf(s, "SYSCTL:\t\t0x%08x\n", |
| OMAP_HSMMC_READ(host->base, SYSCTL)); |
| seq_printf(s, "IE:\t\t0x%08x\n", |
| OMAP_HSMMC_READ(host->base, IE)); |
| seq_printf(s, "ISE:\t\t0x%08x\n", |
| OMAP_HSMMC_READ(host->base, ISE)); |
| seq_printf(s, "CAPA:\t\t0x%08x\n", |
| OMAP_HSMMC_READ(host->base, CAPA)); |
| |
| clk_disable(host->fclk); |
| |
| return 0; |
| } |
| |
| static int omap_hsmmc_regs_open(struct inode *inode, struct file *file) |
| { |
| return single_open(file, omap_hsmmc_regs_show, inode->i_private); |
| } |
| |
| static const struct file_operations mmc_regs_fops = { |
| .open = omap_hsmmc_regs_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| }; |
| |
| static void omap_hsmmc_debugfs(struct mmc_host *mmc) |
| { |
| if (mmc->debugfs_root) |
| debugfs_create_file("regs", S_IRUSR, mmc->debugfs_root, |
| mmc, &mmc_regs_fops); |
| } |
| |
| #else |
| |
| static void omap_hsmmc_debugfs(struct mmc_host *mmc) |
| { |
| } |
| |
| #endif |
| |
| static int __init omap_hsmmc_probe(struct platform_device *pdev) |
| { |
| struct omap_mmc_platform_data *pdata = pdev->dev.platform_data; |
| struct mmc_host *mmc; |
| struct omap_hsmmc_host *host = NULL; |
| struct resource *res; |
| int ret, irq; |
| |
| if (pdata == NULL) { |
| dev_err(&pdev->dev, "Platform Data is missing\n"); |
| return -ENXIO; |
| } |
| |
| if (pdata->nr_slots == 0) { |
| dev_err(&pdev->dev, "No Slots\n"); |
| return -ENXIO; |
| } |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| irq = platform_get_irq(pdev, 0); |
| if (res == NULL || irq < 0) |
| return -ENXIO; |
| |
| res = request_mem_region(res->start, res->end - res->start + 1, |
| pdev->name); |
| if (res == NULL) |
| return -EBUSY; |
| |
| ret = omap_hsmmc_gpio_init(pdata); |
| if (ret) |
| goto err; |
| |
| mmc = mmc_alloc_host(sizeof(struct omap_hsmmc_host), &pdev->dev); |
| if (!mmc) { |
| ret = -ENOMEM; |
| goto err_alloc; |
| } |
| |
| host = mmc_priv(mmc); |
| host->mmc = mmc; |
| host->pdata = pdata; |
| host->dev = &pdev->dev; |
| host->use_dma = 1; |
| host->dev->dma_mask = &pdata->dma_mask; |
| host->dma_ch = -1; |
| host->irq = irq; |
| host->id = pdev->id; |
| host->slot_id = 0; |
| host->mapbase = res->start; |
| host->base = ioremap(host->mapbase, SZ_4K); |
| host->power_mode = MMC_POWER_OFF; |
| |
| platform_set_drvdata(pdev, host); |
| INIT_WORK(&host->mmc_carddetect_work, omap_hsmmc_detect); |
| |
| if (mmc_slot(host).power_saving) |
| mmc->ops = &omap_hsmmc_ps_ops; |
| else |
| mmc->ops = &omap_hsmmc_ops; |
| |
| /* |
| * If regulator_disable can only put vcc_aux to sleep then there is |
| * no off state. |
| */ |
| if (mmc_slot(host).vcc_aux_disable_is_sleep) |
| mmc_slot(host).no_off = 1; |
| |
| mmc->f_min = 400000; |
| mmc->f_max = 52000000; |
| |
| spin_lock_init(&host->irq_lock); |
| |
| host->iclk = clk_get(&pdev->dev, "ick"); |
| if (IS_ERR(host->iclk)) { |
| ret = PTR_ERR(host->iclk); |
| host->iclk = NULL; |
| goto err1; |
| } |
| host->fclk = clk_get(&pdev->dev, "fck"); |
| if (IS_ERR(host->fclk)) { |
| ret = PTR_ERR(host->fclk); |
| host->fclk = NULL; |
| clk_put(host->iclk); |
| goto err1; |
| } |
| |
| omap_hsmmc_context_save(host); |
| |
| mmc->caps |= MMC_CAP_DISABLE; |
| mmc_set_disable_delay(mmc, OMAP_MMC_DISABLED_TIMEOUT); |
| /* we start off in DISABLED state */ |
| host->dpm_state = DISABLED; |
| |
| if (mmc_host_enable(host->mmc) != 0) { |
| clk_put(host->iclk); |
| clk_put(host->fclk); |
| goto err1; |
| } |
| |
| if (clk_enable(host->iclk) != 0) { |
| mmc_host_disable(host->mmc); |
| clk_put(host->iclk); |
| clk_put(host->fclk); |
| goto err1; |
| } |
| |
| if (cpu_is_omap2430()) { |
| host->dbclk = clk_get(&pdev->dev, "mmchsdb_fck"); |
| /* |
| * MMC can still work without debounce clock. |
| */ |
| if (IS_ERR(host->dbclk)) |
| dev_warn(mmc_dev(host->mmc), |
| "Failed to get debounce clock\n"); |
| else |
| host->got_dbclk = 1; |
| |
| if (host->got_dbclk) |
| if (clk_enable(host->dbclk) != 0) |
| dev_dbg(mmc_dev(host->mmc), "Enabling debounce" |
| " clk failed\n"); |
| } |
| |
| /* Since we do only SG emulation, we can have as many segs |
| * as we want. */ |
| mmc->max_phys_segs = 1024; |
| mmc->max_hw_segs = 1024; |
| |
| mmc->max_blk_size = 512; /* Block Length at max can be 1024 */ |
| mmc->max_blk_count = 0xFFFF; /* No. of Blocks is 16 bits */ |
| mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count; |
| mmc->max_seg_size = mmc->max_req_size; |
| |
| mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | |
| MMC_CAP_WAIT_WHILE_BUSY; |
| |
| if (mmc_slot(host).wires >= 8) |
| mmc->caps |= MMC_CAP_8_BIT_DATA; |
| else if (mmc_slot(host).wires >= 4) |
| mmc->caps |= MMC_CAP_4_BIT_DATA; |
| |
| if (mmc_slot(host).nonremovable) |
| mmc->caps |= MMC_CAP_NONREMOVABLE; |
| |
| omap_hsmmc_conf_bus_power(host); |
| |
| /* Select DMA lines */ |
| switch (host->id) { |
| case OMAP_MMC1_DEVID: |
| host->dma_line_tx = OMAP24XX_DMA_MMC1_TX; |
| host->dma_line_rx = OMAP24XX_DMA_MMC1_RX; |
| break; |
| case OMAP_MMC2_DEVID: |
| host->dma_line_tx = OMAP24XX_DMA_MMC2_TX; |
| host->dma_line_rx = OMAP24XX_DMA_MMC2_RX; |
| break; |
| case OMAP_MMC3_DEVID: |
| host->dma_line_tx = OMAP34XX_DMA_MMC3_TX; |
| host->dma_line_rx = OMAP34XX_DMA_MMC3_RX; |
| break; |
| case OMAP_MMC4_DEVID: |
| host->dma_line_tx = OMAP44XX_DMA_MMC4_TX; |
| host->dma_line_rx = OMAP44XX_DMA_MMC4_RX; |
| break; |
| case OMAP_MMC5_DEVID: |
| host->dma_line_tx = OMAP44XX_DMA_MMC5_TX; |
| host->dma_line_rx = OMAP44XX_DMA_MMC5_RX; |
| break; |
| default: |
| dev_err(mmc_dev(host->mmc), "Invalid MMC id\n"); |
| goto err_irq; |
| } |
| |
| /* Request IRQ for MMC operations */ |
| ret = request_irq(host->irq, omap_hsmmc_irq, IRQF_DISABLED, |
| mmc_hostname(mmc), host); |
| if (ret) { |
| dev_dbg(mmc_dev(host->mmc), "Unable to grab HSMMC IRQ\n"); |
| goto err_irq; |
| } |
| |
| if (pdata->init != NULL) { |
| if (pdata->init(&pdev->dev) != 0) { |
| dev_dbg(mmc_dev(host->mmc), |
| "Unable to configure MMC IRQs\n"); |
| goto err_irq_cd_init; |
| } |
| } |
| |
| if (omap_hsmmc_have_reg() && !mmc_slot(host).set_power) { |
| ret = omap_hsmmc_reg_get(host); |
| if (ret) |
| goto err_reg; |
| host->use_reg = 1; |
| } |
| |
| mmc->ocr_avail = mmc_slot(host).ocr_mask; |
| |
| /* Request IRQ for card detect */ |
| if ((mmc_slot(host).card_detect_irq)) { |
| ret = request_irq(mmc_slot(host).card_detect_irq, |
| omap_hsmmc_cd_handler, |
| IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
| | IRQF_DISABLED, |
| mmc_hostname(mmc), host); |
| if (ret) { |
| dev_dbg(mmc_dev(host->mmc), |
| "Unable to grab MMC CD IRQ\n"); |
| goto err_irq_cd; |
| } |
| } |
| |
| omap_hsmmc_disable_irq(host); |
| |
| mmc_host_lazy_disable(host->mmc); |
| |
| omap_hsmmc_protect_card(host); |
| |
| mmc_add_host(mmc); |
| |
| if (mmc_slot(host).name != NULL) { |
| ret = device_create_file(&mmc->class_dev, &dev_attr_slot_name); |
| if (ret < 0) |
| goto err_slot_name; |
| } |
| if (mmc_slot(host).card_detect_irq && mmc_slot(host).get_cover_state) { |
| ret = device_create_file(&mmc->class_dev, |
| &dev_attr_cover_switch); |
| if (ret < 0) |
| goto err_slot_name; |
| } |
| |
| omap_hsmmc_debugfs(mmc); |
| |
| return 0; |
| |
| err_slot_name: |
| mmc_remove_host(mmc); |
| free_irq(mmc_slot(host).card_detect_irq, host); |
| err_irq_cd: |
| if (host->use_reg) |
| omap_hsmmc_reg_put(host); |
| err_reg: |
| if (host->pdata->cleanup) |
| host->pdata->cleanup(&pdev->dev); |
| err_irq_cd_init: |
| free_irq(host->irq, host); |
| err_irq: |
| mmc_host_disable(host->mmc); |
| clk_disable(host->iclk); |
| clk_put(host->fclk); |
| clk_put(host->iclk); |
| if (host->got_dbclk) { |
| clk_disable(host->dbclk); |
| clk_put(host->dbclk); |
| } |
| err1: |
| iounmap(host->base); |
| platform_set_drvdata(pdev, NULL); |
| mmc_free_host(mmc); |
| err_alloc: |
| omap_hsmmc_gpio_free(pdata); |
| err: |
| release_mem_region(res->start, res->end - res->start + 1); |
| return ret; |
| } |
| |
| static int omap_hsmmc_remove(struct platform_device *pdev) |
| { |
| struct omap_hsmmc_host *host = platform_get_drvdata(pdev); |
| struct resource *res; |
| |
| if (host) { |
| mmc_host_enable(host->mmc); |
| mmc_remove_host(host->mmc); |
| if (host->use_reg) |
| omap_hsmmc_reg_put(host); |
| if (host->pdata->cleanup) |
| host->pdata->cleanup(&pdev->dev); |
| free_irq(host->irq, host); |
| if (mmc_slot(host).card_detect_irq) |
| free_irq(mmc_slot(host).card_detect_irq, host); |
| flush_scheduled_work(); |
| |
| mmc_host_disable(host->mmc); |
| clk_disable(host->iclk); |
| clk_put(host->fclk); |
| clk_put(host->iclk); |
| if (host->got_dbclk) { |
| clk_disable(host->dbclk); |
| clk_put(host->dbclk); |
| } |
| |
| mmc_free_host(host->mmc); |
| iounmap(host->base); |
| omap_hsmmc_gpio_free(pdev->dev.platform_data); |
| } |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (res) |
| release_mem_region(res->start, res->end - res->start + 1); |
| platform_set_drvdata(pdev, NULL); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM |
| static int omap_hsmmc_suspend(struct device *dev) |
| { |
| int ret = 0; |
| struct platform_device *pdev = to_platform_device(dev); |
| struct omap_hsmmc_host *host = platform_get_drvdata(pdev); |
| pm_message_t state = PMSG_SUSPEND; /* unused by MMC core */ |
| |
| if (host && host->suspended) |
| return 0; |
| |
| if (host) { |
| host->suspended = 1; |
| if (host->pdata->suspend) { |
| ret = host->pdata->suspend(&pdev->dev, |
| host->slot_id); |
| if (ret) { |
| dev_dbg(mmc_dev(host->mmc), |
| "Unable to handle MMC board" |
| " level suspend\n"); |
| host->suspended = 0; |
| return ret; |
| } |
| } |
| cancel_work_sync(&host->mmc_carddetect_work); |
| mmc_host_enable(host->mmc); |
| ret = mmc_suspend_host(host->mmc); |
| if (ret == 0) { |
| omap_hsmmc_disable_irq(host); |
| OMAP_HSMMC_WRITE(host->base, HCTL, |
| OMAP_HSMMC_READ(host->base, HCTL) & ~SDBP); |
| mmc_host_disable(host->mmc); |
| clk_disable(host->iclk); |
| if (host->got_dbclk) |
| clk_disable(host->dbclk); |
| } else { |
| host->suspended = 0; |
| if (host->pdata->resume) { |
| ret = host->pdata->resume(&pdev->dev, |
| host->slot_id); |
| if (ret) |
| dev_dbg(mmc_dev(host->mmc), |
| "Unmask interrupt failed\n"); |
| } |
| mmc_host_disable(host->mmc); |
| } |
| |
| } |
| return ret; |
| } |
| |
| /* Routine to resume the MMC device */ |
| static int omap_hsmmc_resume(struct device *dev) |
| { |
| int ret = 0; |
| struct platform_device *pdev = to_platform_device(dev); |
| struct omap_hsmmc_host *host = platform_get_drvdata(pdev); |
| |
| if (host && !host->suspended) |
| return 0; |
| |
| if (host) { |
| ret = clk_enable(host->iclk); |
| if (ret) |
| goto clk_en_err; |
| |
| if (mmc_host_enable(host->mmc) != 0) { |
| clk_disable(host->iclk); |
| goto clk_en_err; |
| } |
| |
| if (host->got_dbclk) |
| clk_enable(host->dbclk); |
| |
| omap_hsmmc_conf_bus_power(host); |
| |
| if (host->pdata->resume) { |
| ret = host->pdata->resume(&pdev->dev, host->slot_id); |
| if (ret) |
| dev_dbg(mmc_dev(host->mmc), |
| "Unmask interrupt failed\n"); |
| } |
| |
| omap_hsmmc_protect_card(host); |
| |
| /* Notify the core to resume the host */ |
| ret = mmc_resume_host(host->mmc); |
| if (ret == 0) |
| host->suspended = 0; |
| |
| mmc_host_lazy_disable(host->mmc); |
| } |
| |
| return ret; |
| |
| clk_en_err: |
| dev_dbg(mmc_dev(host->mmc), |
| "Failed to enable MMC clocks during resume\n"); |
| return ret; |
| } |
| |
| #else |
| #define omap_hsmmc_suspend NULL |
| #define omap_hsmmc_resume NULL |
| #endif |
| |
| static struct dev_pm_ops omap_hsmmc_dev_pm_ops = { |
| .suspend = omap_hsmmc_suspend, |
| .resume = omap_hsmmc_resume, |
| }; |
| |
| static struct platform_driver omap_hsmmc_driver = { |
| .remove = omap_hsmmc_remove, |
| .driver = { |
| .name = DRIVER_NAME, |
| .owner = THIS_MODULE, |
| .pm = &omap_hsmmc_dev_pm_ops, |
| }, |
| }; |
| |
| static int __init omap_hsmmc_init(void) |
| { |
| /* Register the MMC driver */ |
| return platform_driver_probe(&omap_hsmmc_driver, omap_hsmmc_probe); |
| } |
| |
| static void __exit omap_hsmmc_cleanup(void) |
| { |
| /* Unregister MMC driver */ |
| platform_driver_unregister(&omap_hsmmc_driver); |
| } |
| |
| module_init(omap_hsmmc_init); |
| module_exit(omap_hsmmc_cleanup); |
| |
| MODULE_DESCRIPTION("OMAP High Speed Multimedia Card driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:" DRIVER_NAME); |
| MODULE_AUTHOR("Texas Instruments Inc"); |