| /* |
| * arch/arm/mach-at91/at572d940hf_devices.c |
| * |
| * Copyright (C) 2008 Atmel Antonio R. Costa <costa.antonior@gmail.com> |
| * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org> |
| * Copyright (C) 2005 David Brownell |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| * |
| */ |
| |
| #include <asm/mach/arch.h> |
| #include <asm/mach/map.h> |
| |
| #include <linux/dma-mapping.h> |
| #include <linux/platform_device.h> |
| |
| #include <mach/board.h> |
| #include <mach/gpio.h> |
| #include <mach/at572d940hf.h> |
| #include <mach/at572d940hf_matrix.h> |
| #include <mach/at91sam9_smc.h> |
| |
| #include "generic.h" |
| #include "sam9_smc.h" |
| |
| |
| /* -------------------------------------------------------------------- |
| * USB Host |
| * -------------------------------------------------------------------- */ |
| |
| #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) |
| static u64 ohci_dmamask = DMA_BIT_MASK(32); |
| static struct at91_usbh_data usbh_data; |
| |
| static struct resource usbh_resources[] = { |
| [0] = { |
| .start = AT572D940HF_UHP_BASE, |
| .end = AT572D940HF_UHP_BASE + SZ_1M - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = AT572D940HF_ID_UHP, |
| .end = AT572D940HF_ID_UHP, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct platform_device at572d940hf_usbh_device = { |
| .name = "at91_ohci", |
| .id = -1, |
| .dev = { |
| .dma_mask = &ohci_dmamask, |
| .coherent_dma_mask = DMA_BIT_MASK(32), |
| .platform_data = &usbh_data, |
| }, |
| .resource = usbh_resources, |
| .num_resources = ARRAY_SIZE(usbh_resources), |
| }; |
| |
| void __init at91_add_device_usbh(struct at91_usbh_data *data) |
| { |
| if (!data) |
| return; |
| |
| usbh_data = *data; |
| platform_device_register(&at572d940hf_usbh_device); |
| |
| } |
| #else |
| void __init at91_add_device_usbh(struct at91_usbh_data *data) {} |
| #endif |
| |
| |
| /* -------------------------------------------------------------------- |
| * USB Device (Gadget) |
| * -------------------------------------------------------------------- */ |
| |
| #ifdef CONFIG_USB_GADGET_AT91 |
| static struct at91_udc_data udc_data; |
| |
| static struct resource udc_resources[] = { |
| [0] = { |
| .start = AT572D940HF_BASE_UDP, |
| .end = AT572D940HF_BASE_UDP + SZ_16K - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = AT572D940HF_ID_UDP, |
| .end = AT572D940HF_ID_UDP, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct platform_device at572d940hf_udc_device = { |
| .name = "at91_udc", |
| .id = -1, |
| .dev = { |
| .platform_data = &udc_data, |
| }, |
| .resource = udc_resources, |
| .num_resources = ARRAY_SIZE(udc_resources), |
| }; |
| |
| void __init at91_add_device_udc(struct at91_udc_data *data) |
| { |
| if (!data) |
| return; |
| |
| if (data->vbus_pin) { |
| at91_set_gpio_input(data->vbus_pin, 0); |
| at91_set_deglitch(data->vbus_pin, 1); |
| } |
| |
| /* Pullup pin is handled internally */ |
| |
| udc_data = *data; |
| platform_device_register(&at572d940hf_udc_device); |
| } |
| #else |
| void __init at91_add_device_udc(struct at91_udc_data *data) {} |
| #endif |
| |
| |
| /* -------------------------------------------------------------------- |
| * Ethernet |
| * -------------------------------------------------------------------- */ |
| |
| #if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE) |
| static u64 eth_dmamask = DMA_BIT_MASK(32); |
| static struct at91_eth_data eth_data; |
| |
| static struct resource eth_resources[] = { |
| [0] = { |
| .start = AT572D940HF_BASE_EMAC, |
| .end = AT572D940HF_BASE_EMAC + SZ_16K - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = AT572D940HF_ID_EMAC, |
| .end = AT572D940HF_ID_EMAC, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct platform_device at572d940hf_eth_device = { |
| .name = "macb", |
| .id = -1, |
| .dev = { |
| .dma_mask = ð_dmamask, |
| .coherent_dma_mask = DMA_BIT_MASK(32), |
| .platform_data = ð_data, |
| }, |
| .resource = eth_resources, |
| .num_resources = ARRAY_SIZE(eth_resources), |
| }; |
| |
| void __init at91_add_device_eth(struct at91_eth_data *data) |
| { |
| if (!data) |
| return; |
| |
| if (data->phy_irq_pin) { |
| at91_set_gpio_input(data->phy_irq_pin, 0); |
| at91_set_deglitch(data->phy_irq_pin, 1); |
| } |
| |
| /* Only RMII is supported */ |
| data->is_rmii = 1; |
| |
| /* Pins used for RMII */ |
| at91_set_A_periph(AT91_PIN_PA16, 0); /* ETXCK_EREFCK */ |
| at91_set_A_periph(AT91_PIN_PA17, 0); /* ERXDV */ |
| at91_set_A_periph(AT91_PIN_PA18, 0); /* ERX0 */ |
| at91_set_A_periph(AT91_PIN_PA19, 0); /* ERX1 */ |
| at91_set_A_periph(AT91_PIN_PA20, 0); /* ERXER */ |
| at91_set_A_periph(AT91_PIN_PA23, 0); /* ETXEN */ |
| at91_set_A_periph(AT91_PIN_PA21, 0); /* ETX0 */ |
| at91_set_A_periph(AT91_PIN_PA22, 0); /* ETX1 */ |
| at91_set_A_periph(AT91_PIN_PA13, 0); /* EMDIO */ |
| at91_set_A_periph(AT91_PIN_PA14, 0); /* EMDC */ |
| |
| eth_data = *data; |
| platform_device_register(&at572d940hf_eth_device); |
| } |
| #else |
| void __init at91_add_device_eth(struct at91_eth_data *data) {} |
| #endif |
| |
| |
| /* -------------------------------------------------------------------- |
| * MMC / SD |
| * -------------------------------------------------------------------- */ |
| |
| #if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE) |
| static u64 mmc_dmamask = DMA_BIT_MASK(32); |
| static struct at91_mmc_data mmc_data; |
| |
| static struct resource mmc_resources[] = { |
| [0] = { |
| .start = AT572D940HF_BASE_MCI, |
| .end = AT572D940HF_BASE_MCI + SZ_16K - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = AT572D940HF_ID_MCI, |
| .end = AT572D940HF_ID_MCI, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct platform_device at572d940hf_mmc_device = { |
| .name = "at91_mci", |
| .id = -1, |
| .dev = { |
| .dma_mask = &mmc_dmamask, |
| .coherent_dma_mask = DMA_BIT_MASK(32), |
| .platform_data = &mmc_data, |
| }, |
| .resource = mmc_resources, |
| .num_resources = ARRAY_SIZE(mmc_resources), |
| }; |
| |
| void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) |
| { |
| if (!data) |
| return; |
| |
| /* input/irq */ |
| if (data->det_pin) { |
| at91_set_gpio_input(data->det_pin, 1); |
| at91_set_deglitch(data->det_pin, 1); |
| } |
| if (data->wp_pin) |
| at91_set_gpio_input(data->wp_pin, 1); |
| if (data->vcc_pin) |
| at91_set_gpio_output(data->vcc_pin, 0); |
| |
| /* CLK */ |
| at91_set_A_periph(AT91_PIN_PC22, 0); |
| |
| /* CMD */ |
| at91_set_A_periph(AT91_PIN_PC23, 1); |
| |
| /* DAT0, maybe DAT1..DAT3 */ |
| at91_set_A_periph(AT91_PIN_PC24, 1); |
| if (data->wire4) { |
| at91_set_A_periph(AT91_PIN_PC25, 1); |
| at91_set_A_periph(AT91_PIN_PC26, 1); |
| at91_set_A_periph(AT91_PIN_PC27, 1); |
| } |
| |
| mmc_data = *data; |
| platform_device_register(&at572d940hf_mmc_device); |
| } |
| #else |
| void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} |
| #endif |
| |
| |
| /* -------------------------------------------------------------------- |
| * NAND / SmartMedia |
| * -------------------------------------------------------------------- */ |
| |
| #if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE) |
| static struct atmel_nand_data nand_data; |
| |
| #define NAND_BASE AT91_CHIPSELECT_3 |
| |
| static struct resource nand_resources[] = { |
| { |
| .start = NAND_BASE, |
| .end = NAND_BASE + SZ_256M - 1, |
| .flags = IORESOURCE_MEM, |
| } |
| }; |
| |
| static struct platform_device at572d940hf_nand_device = { |
| .name = "atmel_nand", |
| .id = -1, |
| .dev = { |
| .platform_data = &nand_data, |
| }, |
| .resource = nand_resources, |
| .num_resources = ARRAY_SIZE(nand_resources), |
| }; |
| |
| void __init at91_add_device_nand(struct atmel_nand_data *data) |
| { |
| unsigned long csa; |
| |
| if (!data) |
| return; |
| |
| csa = at91_sys_read(AT91_MATRIX_EBICSA); |
| at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA); |
| |
| /* enable pin */ |
| if (data->enable_pin) |
| at91_set_gpio_output(data->enable_pin, 1); |
| |
| /* ready/busy pin */ |
| if (data->rdy_pin) |
| at91_set_gpio_input(data->rdy_pin, 1); |
| |
| /* card detect pin */ |
| if (data->det_pin) |
| at91_set_gpio_input(data->det_pin, 1); |
| |
| at91_set_A_periph(AT91_PIN_PB28, 0); /* A[22] */ |
| at91_set_B_periph(AT91_PIN_PA28, 0); /* NANDOE */ |
| at91_set_B_periph(AT91_PIN_PA29, 0); /* NANDWE */ |
| |
| nand_data = *data; |
| platform_device_register(&at572d940hf_nand_device); |
| } |
| |
| #else |
| void __init at91_add_device_nand(struct atmel_nand_data *data) {} |
| #endif |
| |
| |
| /* -------------------------------------------------------------------- |
| * TWI (i2c) |
| * -------------------------------------------------------------------- */ |
| |
| /* |
| * Prefer the GPIO code since the TWI controller isn't robust |
| * (gets overruns and underruns under load) and can only issue |
| * repeated STARTs in one scenario (the driver doesn't yet handle them). |
| */ |
| |
| #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) |
| |
| static struct i2c_gpio_platform_data pdata = { |
| .sda_pin = AT91_PIN_PC7, |
| .sda_is_open_drain = 1, |
| .scl_pin = AT91_PIN_PC8, |
| .scl_is_open_drain = 1, |
| .udelay = 2, /* ~100 kHz */ |
| }; |
| |
| static struct platform_device at572d940hf_twi_device { |
| .name = "i2c-gpio", |
| .id = -1, |
| .dev.platform_data = &pdata, |
| }; |
| |
| void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) |
| { |
| at91_set_GPIO_periph(AT91_PIN_PC7, 1); /* TWD (SDA) */ |
| at91_set_multi_drive(AT91_PIN_PC7, 1); |
| |
| at91_set_GPIO_periph(AT91_PIN_PA8, 1); /* TWCK (SCL) */ |
| at91_set_multi_drive(AT91_PIN_PC8, 1); |
| |
| i2c_register_board_info(0, devices, nr_devices); |
| platform_device_register(&at572d940hf_twi_device); |
| } |
| |
| #elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE) |
| |
| static struct resource twi0_resources[] = { |
| [0] = { |
| .start = AT572D940HF_BASE_TWI0, |
| .end = AT572D940HF_BASE_TWI0 + SZ_16K - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = AT572D940HF_ID_TWI0, |
| .end = AT572D940HF_ID_TWI0, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct platform_device at572d940hf_twi0_device = { |
| .name = "at91_i2c", |
| .id = 0, |
| .resource = twi0_resources, |
| .num_resources = ARRAY_SIZE(twi0_resources), |
| }; |
| |
| static struct resource twi1_resources[] = { |
| [0] = { |
| .start = AT572D940HF_BASE_TWI1, |
| .end = AT572D940HF_BASE_TWI1 + SZ_16K - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = AT572D940HF_ID_TWI1, |
| .end = AT572D940HF_ID_TWI1, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct platform_device at572d940hf_twi1_device = { |
| .name = "at91_i2c", |
| .id = 1, |
| .resource = twi1_resources, |
| .num_resources = ARRAY_SIZE(twi1_resources), |
| }; |
| |
| void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) |
| { |
| /* pins used for TWI0 interface */ |
| at91_set_A_periph(AT91_PIN_PC7, 0); /* TWD */ |
| at91_set_multi_drive(AT91_PIN_PC7, 1); |
| |
| at91_set_A_periph(AT91_PIN_PC8, 0); /* TWCK */ |
| at91_set_multi_drive(AT91_PIN_PC8, 1); |
| |
| /* pins used for TWI1 interface */ |
| at91_set_A_periph(AT91_PIN_PC20, 0); /* TWD */ |
| at91_set_multi_drive(AT91_PIN_PC20, 1); |
| |
| at91_set_A_periph(AT91_PIN_PC21, 0); /* TWCK */ |
| at91_set_multi_drive(AT91_PIN_PC21, 1); |
| |
| i2c_register_board_info(0, devices, nr_devices); |
| platform_device_register(&at572d940hf_twi0_device); |
| platform_device_register(&at572d940hf_twi1_device); |
| } |
| #else |
| void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {} |
| #endif |
| |
| |
| /* -------------------------------------------------------------------- |
| * SPI |
| * -------------------------------------------------------------------- */ |
| |
| #if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) |
| static u64 spi_dmamask = DMA_BIT_MASK(32); |
| |
| static struct resource spi0_resources[] = { |
| [0] = { |
| .start = AT572D940HF_BASE_SPI0, |
| .end = AT572D940HF_BASE_SPI0 + SZ_16K - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = AT572D940HF_ID_SPI0, |
| .end = AT572D940HF_ID_SPI0, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct platform_device at572d940hf_spi0_device = { |
| .name = "atmel_spi", |
| .id = 0, |
| .dev = { |
| .dma_mask = &spi_dmamask, |
| .coherent_dma_mask = DMA_BIT_MASK(32), |
| }, |
| .resource = spi0_resources, |
| .num_resources = ARRAY_SIZE(spi0_resources), |
| }; |
| |
| static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PA5, AT91_PIN_PA6 }; |
| |
| static struct resource spi1_resources[] = { |
| [0] = { |
| .start = AT572D940HF_BASE_SPI1, |
| .end = AT572D940HF_BASE_SPI1 + SZ_16K - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = AT572D940HF_ID_SPI1, |
| .end = AT572D940HF_ID_SPI1, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct platform_device at572d940hf_spi1_device = { |
| .name = "atmel_spi", |
| .id = 1, |
| .dev = { |
| .dma_mask = &spi_dmamask, |
| .coherent_dma_mask = DMA_BIT_MASK(32), |
| }, |
| .resource = spi1_resources, |
| .num_resources = ARRAY_SIZE(spi1_resources), |
| }; |
| |
| static const unsigned spi1_standard_cs[4] = { AT91_PIN_PC3, AT91_PIN_PC4, AT91_PIN_PC5, AT91_PIN_PC6 }; |
| |
| void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) |
| { |
| int i; |
| unsigned long cs_pin; |
| short enable_spi0 = 0; |
| short enable_spi1 = 0; |
| |
| /* Choose SPI chip-selects */ |
| for (i = 0; i < nr_devices; i++) { |
| if (devices[i].controller_data) |
| cs_pin = (unsigned long) devices[i].controller_data; |
| else if (devices[i].bus_num == 0) |
| cs_pin = spi0_standard_cs[devices[i].chip_select]; |
| else |
| cs_pin = spi1_standard_cs[devices[i].chip_select]; |
| |
| if (devices[i].bus_num == 0) |
| enable_spi0 = 1; |
| else |
| enable_spi1 = 1; |
| |
| /* enable chip-select pin */ |
| at91_set_gpio_output(cs_pin, 1); |
| |
| /* pass chip-select pin to driver */ |
| devices[i].controller_data = (void *) cs_pin; |
| } |
| |
| spi_register_board_info(devices, nr_devices); |
| |
| /* Configure SPI bus(es) */ |
| if (enable_spi0) { |
| at91_set_A_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */ |
| at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ |
| at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */ |
| |
| at91_clock_associate("spi0_clk", &at572d940hf_spi0_device.dev, "spi_clk"); |
| platform_device_register(&at572d940hf_spi0_device); |
| } |
| if (enable_spi1) { |
| at91_set_A_periph(AT91_PIN_PC0, 0); /* SPI1_MISO */ |
| at91_set_A_periph(AT91_PIN_PC1, 0); /* SPI1_MOSI */ |
| at91_set_A_periph(AT91_PIN_PC2, 0); /* SPI1_SPCK */ |
| |
| at91_clock_associate("spi1_clk", &at572d940hf_spi1_device.dev, "spi_clk"); |
| platform_device_register(&at572d940hf_spi1_device); |
| } |
| } |
| #else |
| void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {} |
| #endif |
| |
| |
| /* -------------------------------------------------------------------- |
| * Timer/Counter blocks |
| * -------------------------------------------------------------------- */ |
| |
| #ifdef CONFIG_ATMEL_TCLIB |
| |
| static struct resource tcb_resources[] = { |
| [0] = { |
| .start = AT572D940HF_BASE_TCB, |
| .end = AT572D940HF_BASE_TCB + SZ_16K - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = AT572D940HF_ID_TC0, |
| .end = AT572D940HF_ID_TC0, |
| .flags = IORESOURCE_IRQ, |
| }, |
| [2] = { |
| .start = AT572D940HF_ID_TC1, |
| .end = AT572D940HF_ID_TC1, |
| .flags = IORESOURCE_IRQ, |
| }, |
| [3] = { |
| .start = AT572D940HF_ID_TC2, |
| .end = AT572D940HF_ID_TC2, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct platform_device at572d940hf_tcb_device = { |
| .name = "atmel_tcb", |
| .id = 0, |
| .resource = tcb_resources, |
| .num_resources = ARRAY_SIZE(tcb_resources), |
| }; |
| |
| static void __init at91_add_device_tc(void) |
| { |
| /* this chip has a separate clock and irq for each TC channel */ |
| at91_clock_associate("tc0_clk", &at572d940hf_tcb_device.dev, "t0_clk"); |
| at91_clock_associate("tc1_clk", &at572d940hf_tcb_device.dev, "t1_clk"); |
| at91_clock_associate("tc2_clk", &at572d940hf_tcb_device.dev, "t2_clk"); |
| platform_device_register(&at572d940hf_tcb_device); |
| } |
| #else |
| static void __init at91_add_device_tc(void) { } |
| #endif |
| |
| |
| /* -------------------------------------------------------------------- |
| * RTT |
| * -------------------------------------------------------------------- */ |
| |
| static struct resource rtt_resources[] = { |
| { |
| .start = AT91_BASE_SYS + AT91_RTT, |
| .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1, |
| .flags = IORESOURCE_MEM, |
| } |
| }; |
| |
| static struct platform_device at572d940hf_rtt_device = { |
| .name = "at91_rtt", |
| .id = 0, |
| .resource = rtt_resources, |
| .num_resources = ARRAY_SIZE(rtt_resources), |
| }; |
| |
| static void __init at91_add_device_rtt(void) |
| { |
| platform_device_register(&at572d940hf_rtt_device); |
| } |
| |
| |
| /* -------------------------------------------------------------------- |
| * Watchdog |
| * -------------------------------------------------------------------- */ |
| |
| #if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE) |
| static struct platform_device at572d940hf_wdt_device = { |
| .name = "at91_wdt", |
| .id = -1, |
| .num_resources = 0, |
| }; |
| |
| static void __init at91_add_device_watchdog(void) |
| { |
| platform_device_register(&at572d940hf_wdt_device); |
| } |
| #else |
| static void __init at91_add_device_watchdog(void) {} |
| #endif |
| |
| |
| /* -------------------------------------------------------------------- |
| * UART |
| * -------------------------------------------------------------------- */ |
| |
| #if defined(CONFIG_SERIAL_ATMEL) |
| static struct resource dbgu_resources[] = { |
| [0] = { |
| .start = AT91_VA_BASE_SYS + AT91_DBGU, |
| .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = AT91_ID_SYS, |
| .end = AT91_ID_SYS, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct atmel_uart_data dbgu_data = { |
| .use_dma_tx = 0, |
| .use_dma_rx = 0, /* DBGU not capable of receive DMA */ |
| .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU), |
| }; |
| |
| static u64 dbgu_dmamask = DMA_BIT_MASK(32); |
| |
| static struct platform_device at572d940hf_dbgu_device = { |
| .name = "atmel_usart", |
| .id = 0, |
| .dev = { |
| .dma_mask = &dbgu_dmamask, |
| .coherent_dma_mask = DMA_BIT_MASK(32), |
| .platform_data = &dbgu_data, |
| }, |
| .resource = dbgu_resources, |
| .num_resources = ARRAY_SIZE(dbgu_resources), |
| }; |
| |
| static inline void configure_dbgu_pins(void) |
| { |
| at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */ |
| at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */ |
| } |
| |
| static struct resource uart0_resources[] = { |
| [0] = { |
| .start = AT572D940HF_BASE_US0, |
| .end = AT572D940HF_BASE_US0 + SZ_16K - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = AT572D940HF_ID_US0, |
| .end = AT572D940HF_ID_US0, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct atmel_uart_data uart0_data = { |
| .use_dma_tx = 1, |
| .use_dma_rx = 1, |
| }; |
| |
| static u64 uart0_dmamask = DMA_BIT_MASK(32); |
| |
| static struct platform_device at572d940hf_uart0_device = { |
| .name = "atmel_usart", |
| .id = 1, |
| .dev = { |
| .dma_mask = &uart0_dmamask, |
| .coherent_dma_mask = DMA_BIT_MASK(32), |
| .platform_data = &uart0_data, |
| }, |
| .resource = uart0_resources, |
| .num_resources = ARRAY_SIZE(uart0_resources), |
| }; |
| |
| static inline void configure_usart0_pins(unsigned pins) |
| { |
| at91_set_A_periph(AT91_PIN_PA8, 1); /* TXD0 */ |
| at91_set_A_periph(AT91_PIN_PA7, 0); /* RXD0 */ |
| |
| if (pins & ATMEL_UART_RTS) |
| at91_set_A_periph(AT91_PIN_PA10, 0); /* RTS0 */ |
| if (pins & ATMEL_UART_CTS) |
| at91_set_A_periph(AT91_PIN_PA9, 0); /* CTS0 */ |
| } |
| |
| static struct resource uart1_resources[] = { |
| [0] = { |
| .start = AT572D940HF_BASE_US1, |
| .end = AT572D940HF_BASE_US1 + SZ_16K - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = AT572D940HF_ID_US1, |
| .end = AT572D940HF_ID_US1, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct atmel_uart_data uart1_data = { |
| .use_dma_tx = 1, |
| .use_dma_rx = 1, |
| }; |
| |
| static u64 uart1_dmamask = DMA_BIT_MASK(32); |
| |
| static struct platform_device at572d940hf_uart1_device = { |
| .name = "atmel_usart", |
| .id = 2, |
| .dev = { |
| .dma_mask = &uart1_dmamask, |
| .coherent_dma_mask = DMA_BIT_MASK(32), |
| .platform_data = &uart1_data, |
| }, |
| .resource = uart1_resources, |
| .num_resources = ARRAY_SIZE(uart1_resources), |
| }; |
| |
| static inline void configure_usart1_pins(unsigned pins) |
| { |
| at91_set_A_periph(AT91_PIN_PC10, 1); /* TXD1 */ |
| at91_set_A_periph(AT91_PIN_PC9 , 0); /* RXD1 */ |
| |
| if (pins & ATMEL_UART_RTS) |
| at91_set_A_periph(AT91_PIN_PC12, 0); /* RTS1 */ |
| if (pins & ATMEL_UART_CTS) |
| at91_set_A_periph(AT91_PIN_PC11, 0); /* CTS1 */ |
| } |
| |
| static struct resource uart2_resources[] = { |
| [0] = { |
| .start = AT572D940HF_BASE_US2, |
| .end = AT572D940HF_BASE_US2 + SZ_16K - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = AT572D940HF_ID_US2, |
| .end = AT572D940HF_ID_US2, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct atmel_uart_data uart2_data = { |
| .use_dma_tx = 1, |
| .use_dma_rx = 1, |
| }; |
| |
| static u64 uart2_dmamask = DMA_BIT_MASK(32); |
| |
| static struct platform_device at572d940hf_uart2_device = { |
| .name = "atmel_usart", |
| .id = 3, |
| .dev = { |
| .dma_mask = &uart2_dmamask, |
| .coherent_dma_mask = DMA_BIT_MASK(32), |
| .platform_data = &uart2_data, |
| }, |
| .resource = uart2_resources, |
| .num_resources = ARRAY_SIZE(uart2_resources), |
| }; |
| |
| static inline void configure_usart2_pins(unsigned pins) |
| { |
| at91_set_A_periph(AT91_PIN_PC15, 1); /* TXD2 */ |
| at91_set_A_periph(AT91_PIN_PC14, 0); /* RXD2 */ |
| |
| if (pins & ATMEL_UART_RTS) |
| at91_set_A_periph(AT91_PIN_PC17, 0); /* RTS2 */ |
| if (pins & ATMEL_UART_CTS) |
| at91_set_A_periph(AT91_PIN_PC16, 0); /* CTS2 */ |
| } |
| |
| static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ |
| struct platform_device *atmel_default_console_device; /* the serial console device */ |
| |
| void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) |
| { |
| struct platform_device *pdev; |
| |
| switch (id) { |
| case 0: /* DBGU */ |
| pdev = &at572d940hf_dbgu_device; |
| configure_dbgu_pins(); |
| at91_clock_associate("mck", &pdev->dev, "usart"); |
| break; |
| case AT572D940HF_ID_US0: |
| pdev = &at572d940hf_uart0_device; |
| configure_usart0_pins(pins); |
| at91_clock_associate("usart0_clk", &pdev->dev, "usart"); |
| break; |
| case AT572D940HF_ID_US1: |
| pdev = &at572d940hf_uart1_device; |
| configure_usart1_pins(pins); |
| at91_clock_associate("usart1_clk", &pdev->dev, "usart"); |
| break; |
| case AT572D940HF_ID_US2: |
| pdev = &at572d940hf_uart2_device; |
| configure_usart2_pins(pins); |
| at91_clock_associate("usart2_clk", &pdev->dev, "usart"); |
| break; |
| default: |
| return; |
| } |
| pdev->id = portnr; /* update to mapped ID */ |
| |
| if (portnr < ATMEL_MAX_UART) |
| at91_uarts[portnr] = pdev; |
| } |
| |
| void __init at91_set_serial_console(unsigned portnr) |
| { |
| if (portnr < ATMEL_MAX_UART) |
| atmel_default_console_device = at91_uarts[portnr]; |
| } |
| |
| void __init at91_add_device_serial(void) |
| { |
| int i; |
| |
| for (i = 0; i < ATMEL_MAX_UART; i++) { |
| if (at91_uarts[i]) |
| platform_device_register(at91_uarts[i]); |
| } |
| |
| if (!atmel_default_console_device) |
| printk(KERN_INFO "AT91: No default serial console defined.\n"); |
| } |
| |
| #else |
| void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} |
| void __init at91_set_serial_console(unsigned portnr) {} |
| void __init at91_add_device_serial(void) {} |
| #endif |
| |
| |
| /* -------------------------------------------------------------------- |
| * mAgic |
| * -------------------------------------------------------------------- */ |
| |
| #ifdef CONFIG_MAGICV |
| static struct resource mAgic_resources[] = { |
| { |
| .start = AT91_MAGIC_PM_BASE, |
| .end = AT91_MAGIC_PM_BASE + AT91_MAGIC_PM_SIZE - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| { |
| .start = AT91_MAGIC_DM_I_BASE, |
| .end = AT91_MAGIC_DM_I_BASE + AT91_MAGIC_DM_I_SIZE - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| { |
| .start = AT91_MAGIC_DM_F_BASE, |
| .end = AT91_MAGIC_DM_F_BASE + AT91_MAGIC_DM_F_SIZE - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| { |
| .start = AT91_MAGIC_DM_DB_BASE, |
| .end = AT91_MAGIC_DM_DB_BASE + AT91_MAGIC_DM_DB_SIZE - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| { |
| .start = AT91_MAGIC_REGS_BASE, |
| .end = AT91_MAGIC_REGS_BASE + AT91_MAGIC_REGS_SIZE - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| { |
| .start = AT91_MAGIC_EXTPAGE_BASE, |
| .end = AT91_MAGIC_EXTPAGE_BASE + AT91_MAGIC_EXTPAGE_SIZE - 1, |
| .flags = IORESOURCE_MEM, |
| }, |
| { |
| .start = AT572D940HF_ID_MSIRQ0, |
| .end = AT572D940HF_ID_MSIRQ0, |
| .flags = IORESOURCE_IRQ, |
| }, |
| { |
| .start = AT572D940HF_ID_MHALT, |
| .end = AT572D940HF_ID_MHALT, |
| .flags = IORESOURCE_IRQ, |
| }, |
| { |
| .start = AT572D940HF_ID_MEXC, |
| .end = AT572D940HF_ID_MEXC, |
| .flags = IORESOURCE_IRQ, |
| }, |
| { |
| .start = AT572D940HF_ID_MEDMA, |
| .end = AT572D940HF_ID_MEDMA, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| static struct platform_device mAgic_device = { |
| .name = "mAgic", |
| .id = -1, |
| .num_resources = ARRAY_SIZE(mAgic_resources), |
| .resource = mAgic_resources, |
| }; |
| |
| void __init at91_add_device_mAgic(void) |
| { |
| platform_device_register(&mAgic_device); |
| } |
| #else |
| void __init at91_add_device_mAgic(void) {} |
| #endif |
| |
| |
| /* -------------------------------------------------------------------- */ |
| |
| /* |
| * These devices are always present and don't need any board-specific |
| * setup. |
| */ |
| static int __init at91_add_standard_devices(void) |
| { |
| at91_add_device_rtt(); |
| at91_add_device_watchdog(); |
| at91_add_device_tc(); |
| return 0; |
| } |
| |
| arch_initcall(at91_add_standard_devices); |