| /* |
| * (C) Copyright 2010 Quantenna Communications Inc. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| /* |
| * Header file which describes Topaz platform. |
| * Has to be used by both kernel and bootloader. |
| */ |
| |
| #ifndef __TOPAZ_PLATFORM_H |
| #define __TOPAZ_PLATFORM_H |
| |
| #include "ruby_platform.h" |
| |
| #ifndef MS |
| #define MS(_v, _f) (((_v) & _f) >> _f##_S) |
| #endif |
| #ifndef SM |
| #define SM(_v, _f) (((_v) << _f##_S) & _f) |
| #endif |
| |
| /* Extra reset bits */ |
| #define TOPAZ_SYS_CTL_RESET_AUC (RUBY_BIT(10)) |
| #define TOPAZ_SYS_CTL_ALIAS_MAP (RUBY_BIT(29)) |
| #define TOPAZ_SYS_CTL_UNIFIED_MAP (RUBY_BIT(30)) |
| |
| /* Extra system controller bits */ |
| #define TOPAZ_SYS_CTL_DDRCLK_S 22 |
| #define TOPAZ_SYS_CTL_DDRCLK (0x7 << TOPAZ_SYS_CTL_DDRCLK_S) |
| #define TOPAZ_SYS_CTL_DDRCLK_400MHZ SM(0, TOPAZ_SYS_CTL_DDRCLK) |
| #define TOPAZ_SYS_CTL_DDRCLK_320MHZ SM(1, TOPAZ_SYS_CTL_DDRCLK) |
| #define TOPAZ_SYS_CTL_DDRCLK_250MHZ SM(2, TOPAZ_SYS_CTL_DDRCLK) |
| #define TOPAZ_SYS_CTL_DDRCLK_200MHZ SM(3, TOPAZ_SYS_CTL_DDRCLK) |
| #define TOPAZ_SYS_CTL_DDRCLK_160MHZ SM(4, TOPAZ_SYS_CTL_DDRCLK) |
| |
| /* Extra system controller registers */ |
| #define TOPAZ_SYS_CTL_M2D_2_INT (RUBY_SYS_CTL_BASE_ADDR + 0x0184) |
| #define TOPAZ_SYS_CTL_M2D_2_INT_MASK (RUBY_SYS_CTL_BASE_ADDR + 0x0188) |
| #define TOPAZ_SYS_CTL_M2D_3_INT (RUBY_SYS_CTL_BASE_ADDR + 0x018C) |
| #define TOPAZ_SYS_CTL_M2D_3_INT_MASK (RUBY_SYS_CTL_BASE_ADDR + 0x0190) |
| |
| /* Temperature control registers */ |
| #define TOPAZ_SYS_CTL_TEMPSENS_CTL (RUBY_SYS_CTL_BASE_ADDR + 0x0108) |
| #define TOPAZ_SYS_CTL_TEMPSENS_CTL_START_CONV 0x00000001 |
| #define TOPAZ_SYS_CTL_TEMPSENS_CTL_SHUTDWN 0x00000002 |
| |
| #define TOPAZ_SYS_CTL_TEMP_SENS_TEST_CTL (RUBY_SYS_CTL_BASE_ADDR + 0x010C) |
| |
| #define TOPAZ_SYS_CTL_TEMP_SENS_DATA (RUBY_SYS_CTL_BASE_ADDR + 0x0110) |
| #define TOPAZ_SYS_CTL_TEMP_SENS_DATA_TEMP 0x00000FFF |
| #define TOPAZ_SYS_CTL_TEMP_SENS_DATA_END_CONV 0x00001000 |
| #define TOPAZ_SYS_CTL_TEMP_SENS_DATA_END_CONV_S 11 |
| |
| /* AuC SoC interrupt controller registers */ |
| #define TOPAZ_AUC_INT_MASK (RUBY_SYS_CTL_BASE_ADDR + 0x0174) |
| #define TOPAZ_AUC_IPC_INT (RUBY_SYS_CTL_BASE_ADDR + 0x0178) |
| #define TOPAZ_AUC_IPC_INT_MASK(val) ((val & 0xFFFF) << 16) |
| #define TOPAZ_AUC_INT_STATUS (RUBY_SYS_CTL_BASE_ADDR + 0x00D0) |
| |
| /* Linux Host interrupt controller registers */ |
| #define TOPAZ_LH_IPC3_INT (RUBY_SYS_CTL_BASE_ADDR + 0x14C) |
| #define TOPAZ_LH_IPC3_INT_MASK (RUBY_SYS_CTL_BASE_ADDR + 0x150) |
| #define TOPAZ_IPC4_INT(base) ((base) + 0x13C) |
| #define TOPAZ_IPC4_INT_MASK(base) ((base) + 0x140) |
| #define TOPAZ_LH_IPC4_INT (TOPAZ_IPC4_INT(RUBY_SYS_CTL_BASE_ADDR)) |
| #define TOPAZ_LH_IPC4_INT_MASK (TOPAZ_IPC4_INT_MASK(RUBY_SYS_CTL_BASE_ADDR)) |
| |
| /* Multi-processor hardware semahpore */ |
| #define TOPAZ_MPROC_SEMA (RUBY_SYS_CTL_BASE_ADDR + 0x0170) |
| |
| /* MuC SoC Interrupt controller registers */ |
| #define TOPAZ_SYS_CTL_A2M_INT (RUBY_SYS_CTL_BASE_ADDR + 0x0144) |
| #define TOPAZ_SYS_CTL_A2M_INT_MASK (RUBY_SYS_CTL_BASE_ADDR + 0x0148) |
| |
| /* PCIE SoC Interrupt controller registers */ |
| #define TOPAZ_SYS_CTL_PCIE_INT_STATUS (RUBY_SYS_CTL_BASE_ADDR + 0x017c) |
| #define TOPAZ_SYS_CTL_TQE_INT_STATS_BIT (RUBY_BIT(10)) |
| |
| #define TOPAZ_SWITCH_BASE_ADDR 0xE1000000 |
| #define TOPAZ_SWITCH_OUT_NODE_BITS 7 /* Up to 128 output nodes */ |
| #define TOPAZ_SWITCH_OUT_NODE_MAX (1 << TOPAZ_SWITCH_OUT_NODE_BITS) |
| #define TOPAZ_SWITCH_OUT_NODE_MASK ((1 << TOPAZ_SWITCH_OUT_NODE_BITS) - 1) |
| #define TOPAZ_SWITCH_OUT_PORT_BITS 4 /* Up to 16 output ports. 8 are used */ |
| #define TOPAZ_SWITCH_OUT_PORT_MAX (1 << TOPAZ_SWITCH_OUT_PORT_BITS) |
| #define TOPAZ_SWITCH_OUT_PORT_MASK ((1 << TOPAZ_SWITCH_OUT_PORT_BITS) - 1) |
| |
| /* TQE */ |
| #define TOPAZ_TQE_BASE_ADDR (TOPAZ_SWITCH_BASE_ADDR + 0x30000) |
| #define TOPAZ_TQE_EMAC_TDES_1_CNTL (TOPAZ_TQE_BASE_ADDR + 0x0000) |
| #define TOPAZ_TQE_EMAC_TDES_1_CNTL_VAL 0x000000FF |
| #define TOPAZ_TQE_EMAC_TDES_1_CNTL_VAL_S 0 |
| #define TOPAZ_TQE_EMAC_TDES_1_CNTL_SHIFT 24 /* reg bits [7:0] become emac ctrl [31:24] */ |
| #define TOPAZ_TQE_EMAC_TDES_1_CNTL_MCAST_APPEND_CNTR_EN_S 16 |
| #define TOPAZ_TQE_EMAC_TDES_1_CNTL_MCAST_APPEND_CNTR_EN 0x00010000 |
| #define TOPAZ_TQE_EMAC_TDES_1_CNTL_PRI_MODE 0x0F000000 |
| #define TOPAZ_TQE_EMAC_TDES_1_CNTL_PRI_MODE_S 24 |
| #define TOPAZ_TQE_MISC (TOPAZ_TQE_BASE_ADDR + 0x0004) |
| #define TOPAZ_TQE_MISC_CLR_DONE_DLY_CYCLE_NUM 0x000003FF /* q_avail_clr_done delay cycles */ |
| #define TOPAZ_TQE_MISC_CLR_DONE_DLY_CYCLE_NUM_S 0 |
| #define TOPAZ_TQE_MISC_RFLCT_OUT_PORT 0x000F0000 /* dest port for reflected pkts */ |
| #define TOPAZ_TQE_MISC_RFLCT_OUT_PORT_S 16 |
| #define TOPAZ_TQE_MISC_RFLCT_OUT_PORT_ENABLE 0x00100000 /* redirect reflected pkts */ |
| #define TOPAZ_TQE_MISC_RFLCT_OUT_PORT_ENABLE_S 20 |
| #define TOPAZ_TQE_MISC_CLR_DONE_DLY_ENABLE 0x80000000 /* enable q_avail_clr_done delay */ |
| #define TOPAZ_TQE_MISC_CLR_DONE_DLY_ENABLE_S 31 |
| #define TOPAZ_TQE_WMAC_Q_STATUS_PTR (TOPAZ_TQE_BASE_ADDR + 0x0008) |
| #define TOPAZ_TQE_CPU_SEM (TOPAZ_TQE_BASE_ADDR + 0x000c) |
| #define TOPAZ_TQE_OUTPORT_EMAC0_CNT (TOPAZ_TQE_BASE_ADDR + 0x0010) |
| #define TOPAZ_TQE_OUTPORT_EMAC1_CNT (TOPAZ_TQE_BASE_ADDR + 0x0014) |
| #define TOPAZ_TQE_OUTPORT_WMAC_CNT (TOPAZ_TQE_BASE_ADDR + 0x0018) |
| #define TOPAZ_TQE_OUTPORT_LHOST_CNT (TOPAZ_TQE_BASE_ADDR + 0x001c) |
| #define TOPAZ_TQE_OUTPORT_MUC_CNT (TOPAZ_TQE_BASE_ADDR + 0x0020) |
| #define TOPAZ_TQE_OUTPORT_DSP_CNT (TOPAZ_TQE_BASE_ADDR + 0x0024) |
| #define TOPAZ_TQE_OUTPORT_AUC_CNT (TOPAZ_TQE_BASE_ADDR + 0x0028) |
| #define TOPAZ_TQE_OUTPORT_PCIE_CNT (TOPAZ_TQE_BASE_ADDR + 0x002c) |
| #define TOPAZ_TQE_Q_AVAIL_CLR_CNTL (TOPAZ_TQE_BASE_ADDR + 0x0030) |
| #define TOPAZ_TQE_Q_AVAIL_CLR_CNTL_TID 0xF |
| #define TOPAZ_TQE_Q_AVAIL_CLR_CNTL_TID_S 0 |
| #define TOPAZ_TQE_Q_AVAIL_CLR_CNTL_NODE 0x7F00 |
| #define TOPAZ_TQE_Q_AVAIL_CLR_CNTL_NODE_S 8 |
| #define TOPAZ_TQE_Q_AVAIL_CLR_CNTL_CLEAR RUBY_BIT(30) |
| #define TOPAZ_TQE_Q_AVAIL_CLR_CNTL_CLEAR_DONE RUBY_BIT(31) |
| #define TOPAZ_TQE_DROP_CNT (TOPAZ_TQE_BASE_ADDR + 0x0034) |
| #define TOPAZ_TQE_DROP_EMAC0_CNT (TOPAZ_TQE_BASE_ADDR + 0x0040) |
| #define TOPAZ_TQE_DROP_EMAC1_CNT (TOPAZ_TQE_BASE_ADDR + 0x0044) |
| #define TOPAZ_TQE_DROP_WMAC_CNT (TOPAZ_TQE_BASE_ADDR + 0x0048) |
| #define TOPAZ_TQE_DROP_LHOST_CNT (TOPAZ_TQE_BASE_ADDR + 0x004c) |
| #define TOPAZ_TQE_DROP_MUC_CNT (TOPAZ_TQE_BASE_ADDR + 0x0050) |
| #define TOPAZ_TQE_DROP_DSP_CNT (TOPAZ_TQE_BASE_ADDR + 0x0054) |
| #define TOPAZ_TQE_DROP_AUC_CNT (TOPAZ_TQE_BASE_ADDR + 0x0058) |
| #define TOPAZ_TQE_DROP_PCIE_CNT (TOPAZ_TQE_BASE_ADDR + 0x005c) |
| |
| /* TQE-CPU interface */ |
| #define TOPAZ_TQE_CPUIF_BASE(num) (TOPAZ_TQE_BASE_ADDR + 0x4000 + 0x1000 * (num)) // For FPGA build 72 and earlier need to use (0xE1040000 + 0x10000 * (num)) |
| #define TOPAZ_TQE_CPUIF_CSR(num) (TOPAZ_TQE_CPUIF_BASE(num) + 0x0000) |
| #define TOPAZ_TQE_CPUIF_RX_RING_SIZE(num) (TOPAZ_TQE_CPUIF_BASE(num) + 0x0004) |
| #define TOPAZ_TQE_CPUIF_RX_RING(num) (TOPAZ_TQE_CPUIF_BASE(num) + 0x0008) |
| #define TOPAZ_TQE_CPUIF_RX_CURPTR(num) (TOPAZ_TQE_CPUIF_BASE(num) + 0x000c) |
| #define TOPAZ_TQE_CPUIF_PKT_FINISH(num) (TOPAZ_TQE_CPUIF_BASE(num) + 0x0010) |
| #define TOPAZ_TQE_CPUIF_Q_PTR_STATUS(num) (TOPAZ_TQE_CPUIF_BASE(num) + 0x0014) |
| #define TOPAZ_TQE_CPUIF_PPCTL0(num) (TOPAZ_TQE_CPUIF_BASE(num) + 0x0020) |
| #define TOPAZ_TQE_CPUIF_PPCTL1(num) (TOPAZ_TQE_CPUIF_BASE(num) + 0x0024) |
| #define TOPAZ_TQE_CPUIF_PPCTL2(num) (TOPAZ_TQE_CPUIF_BASE(num) + 0x0028) |
| #define TOPAZ_TQE_CPUIF_PPCTL3(num) (TOPAZ_TQE_CPUIF_BASE(num) + 0x002c) |
| #define TOPAZ_TQE_CPUIF_PPCTL4(num) (TOPAZ_TQE_CPUIF_BASE(num) + 0x0030) |
| #define TOPAZ_TQE_CPUIF_PPCTL5(num) (TOPAZ_TQE_CPUIF_BASE(num) + 0x0034) |
| #define TOPAZ_TQE_CPUIF_TXSTART(num) (TOPAZ_TQE_CPUIF_BASE(num) + 0x0038) |
| #define TOPAZ_TQE_CPUIF_STATUS(num) (TOPAZ_TQE_CPUIF_BASE(num) + 0x003C) |
| /* Some bits definitions */ |
| #define TOPAZ_TQE_CPUIF_CSR_IRQ_EN RUBY_BIT(0) |
| #define TOPAZ_TQE_CPUIF_CSR_IRQ_THRESHOLD(num) (((num) & 0x7F) << 8) |
| #define TOPAZ_TQE_CPUIF_CSR_IRQ_THRESHOLD_EN RUBY_BIT(15) |
| #define TOPAZ_TQE_CPUIF_CSR_RESET RUBY_BIT(31) |
| /* Aux definitions */ |
| #define TOPAZ_TQE_CPUIF_RXDESC_ALIGN 8 /* TQE CPU rx descriptors must be 64 bit aligned */ |
| |
| /** |
| * Hardware Buffer Manager |
| */ |
| #define TOPAZ_HBM_BASE_ADDR (TOPAZ_SWITCH_BASE_ADDR + 0x20000) |
| #define TOPAZ_HBM_CSR_REG (TOPAZ_HBM_BASE_ADDR + 0x0000) |
| #define TOPAZ_HBM_CSR_Q_EN(x) (BIT(0 + (x))) |
| #define TOPAZ_HBM_CSR_INT_EN (BIT(7)) |
| #define TOPAZ_HBM_CSR_OFLOW_INT_MASK(x) (BIT(8 + (x))) |
| #define TOPAZ_HBM_CSR_UFLOW_INT_MASK(x) (BIT(12 + (x))) |
| #define TOPAZ_HBM_CSR_OFLOW_INT_RAW(x) (BIT(16 + (x))) |
| #define TOPAZ_HBM_CSR_UFLOW_INT_RAW(x) (BIT(20 + (x))) |
| #define TOPAZ_HBM_CSR_INT_MSK_RAW (0xff << 16) |
| #define TOPAZ_HBM_CSR_OFLOW_INT_STATUS(x) (BIT(24 + (x))) |
| #define TOPAZ_HBM_CSR_UFLOW_INT_STATUS(x) (BIT(28 + (x))) |
| |
| #define TOPAZ_HBM_BASE_REG(x) (TOPAZ_HBM_BASE_ADDR + 0x0004 + ((x) * 0x10)) |
| #define TOPAZ_HBM_LIMIT_REG(x) (TOPAZ_HBM_BASE_ADDR + 0x0008 + ((x) * 0x10)) |
| #define TOPAZ_HBM_WR_PTR(x) (TOPAZ_HBM_BASE_ADDR + 0x000c + ((x) * 0x10)) |
| #define TOPAZ_HBM_RD_PTR(x) (TOPAZ_HBM_BASE_ADDR + 0x0010 + ((x) * 0x10)) |
| |
| #define TOPAZ_HBM_POOL(x) (TOPAZ_HBM_BASE_ADDR + 0x0100 + ((x) * 0x4)) |
| #define TOPAZ_HBM_POOL_REQ(x) (TOPAZ_HBM_BASE_ADDR + 0x0110 + ((x) * 0x4)) |
| #define TOPAZ_HBM_POOL_DATA(x) (TOPAZ_HBM_BASE_ADDR + 0x0140 + ((x) * 0x4)) |
| |
| #define TOPAZ_HBM_OVERFLOW_CNT (TOPAZ_HBM_BASE_ADDR + 0x0190) |
| #define TOPAZ_HBM_UNDERFLOW_CNT (TOPAZ_HBM_BASE_ADDR + 0x0194) |
| |
| #define TOPAZ_HBM_MASTER_COUNT 9 |
| #define TOPAZ_HBM_POOL_COUNT 4 |
| #define TOPAZ_HBM_POOL_REQUEST_CNT(master, pool) (TOPAZ_HBM_BASE_ADDR + 0x0200 + (master) * 0x20 + (pool) * 0x4) |
| #define TOPAZ_HBM_POOL_RELEASE_CNT(master, pool) (TOPAZ_HBM_BASE_ADDR + 0x0210 + (master) * 0x20 + (pool) * 0x4) |
| |
| #define TOPAZ_HBM_RELEASE_BUF (BIT(0)) |
| #define TOPAZ_HBM_REQUEST_BUF (BIT(1)) |
| #define TOPAZ_HBM_POOL_NUM(x) ((x) << 2) |
| #define TOPAZ_HBM_DONE (BIT(31)) |
| |
| /* SoC interrupts */ |
| #define TOPAZ_SYS_CTL_M2L_HI_INT PLATFORM_REG_SWITCH(RUBY_SYS_CTL_M2L_INT, (RUBY_SYS_CTL_BASE_ADDR + 0xFC)) |
| |
| /** |
| * Forwarding Table |
| */ |
| #define TOPAZ_FWT_BASE_ADDR (TOPAZ_SWITCH_BASE_ADDR + 0x0) |
| #define TOPAZ_FWT_SIZE (BIT(12)) |
| |
| #define TOPAZ_FWT_TABLE_BASE (TOPAZ_FWT_BASE_ADDR) |
| |
| #define TOPAZ_FWT_VLAN_TABLE_BASE (TOPAZ_FWT_BASE_ADDR + 0x10000) |
| #define TOPAZ_FWT_VLAN_TABLE_LIMIT (TOPAZ_FWT_BASE_ADDR + 0x14000) |
| |
| #define TOPAZ_FWT_CTRL_BASE_ADDR (TOPAZ_FWT_BASE_ADDR + 0xA000) |
| |
| #define TOPAZ_FWT_CPU_ACCESS (TOPAZ_FWT_CTRL_BASE_ADDR + 0x0000) |
| #define TOPAZ_FWT_CPU_ACCESS_STATE 0x0000000F |
| #define TOPAZ_FWT_CPU_ACCESS_STATE_S 0 |
| #define TOPAZ_FWT_CPU_ACCESS_STATE_GRANTED 0x3 |
| #define TOPAZ_FWT_CPU_ACCESS_REQ BIT(31) |
| #define TOPAZ_FWT_TIME_STAMP_CTRL (TOPAZ_FWT_CTRL_BASE_ADDR + 0x0004) |
| #define TOPAZ_FWT_TIME_STAMP_CTRL_UNIT 0x0000001F |
| #define TOPAZ_FWT_TIME_STAMP_CTRL_UNIT_S 0 |
| #define TOPAZ_FWT_TIME_STAMP_CTRL_SCALE 0x000003e0 |
| #define TOPAZ_FWT_TIME_STAMP_CTRL_SCALE_S 5 |
| #define TOPAZ_FWT_TIME_STAMP_DIS_AUTO_UPDATE_S (16) |
| #define TOPAZ_FWT_TIME_STAMP_CTRL_CLEAR BIT(31) |
| #define TOPAZ_FWT_TIME_STAMP_CNT (TOPAZ_FWT_CTRL_BASE_ADDR + 0x0008) |
| #define TOPAZ_FWT_HASH_CTRL (TOPAZ_FWT_CTRL_BASE_ADDR + 0x000c) |
| #define TOPAZ_FWT_HASH_CTRL_ENABLE BIT(15) |
| |
| #define TOPAZ_FWT_LOOKUP_LHOST 0 |
| #define TOPAZ_FWT_LOOKUP_MUC 1 |
| #define TOPAZ_FWT_LOOKUP_DSP 2 |
| #define TOPAZ_FWT_LOOKUP_AUC 3 |
| |
| #define __TOPAZ_FWT_LOOKUP_REG(x) (TOPAZ_FWT_CTRL_BASE_ADDR + 0x0010 + ((x) * 0x10)) |
| #define __TOPAZ_FWT_LOOKUP_MAC_LO(x) (TOPAZ_FWT_CTRL_BASE_ADDR + 0x0014 + ((x) * 0x10)) |
| #define __TOPAZ_FWT_LOOKUP_MAC_HI(x) (TOPAZ_FWT_CTRL_BASE_ADDR + 0x0018 + ((x) * 0x10)) |
| |
| #define TOPAZ_FWT_LOOKUP_TRIG 0x00000001 |
| #define TOPAZ_FWT_LOOKUP_TRIG_S 0 |
| #define TOPAZ_FWT_LOOKUP_ENTRY_ADDR 0x7FF00000 |
| #define TOPAZ_FWT_LOOKUP_ENTRY_ADDR_S 20 |
| #define TOPAZ_FWT_LOOKUP_HASH_ADDR 0x0003FF00 |
| #define TOPAZ_FWT_LOOKUP_HASH_ADDR_S 8 |
| #define TOPAZ_FWT_LOOKUP_VALID 0x80000000 |
| #define TOPAZ_FWT_LOOKUP_VALID_S 31 |
| |
| #define TOPAZ_FWT_PORT_EMAC0 (0) |
| #define TOPAZ_FWT_PORT_EMAC1 (1) |
| #define TOPAZ_FWT_PORT_WMAC (2) |
| #define TOPAZ_FWT_PORT_PCIE (3) |
| #define TOPAZ_FWT_PORT_LH (4) |
| #define TOPAZ_FWT_PORT_MUC (5) |
| #define TOPAZ_FWT_PORT_DSP (6) |
| #define TOPAZ_FWT_PORT_AUC (7) |
| |
| #define TOPAZ_FWT_ENTRY_NXT_ENTRY 0x0FFE0000 |
| #define TOPAZ_FWT_ENTRY_NXT_ENTRY_S 17 |
| #define TOPAZ_FWT_ENTRY_VALID 0x80000000 |
| #define TOPAZ_FWT_ENTRY_VALID_S 31 |
| #define TOPAZ_FWT_ENTRY_PORTAL 0x40000000 |
| #define TOPAZ_FWT_ENTRY_PORTAL_S 30 |
| |
| #define TOPAZ_FWT_ENTRY_OUT_NODE_0 0x0000007F |
| #define TOPAZ_FWT_ENTRY_OUT_NODE_0_S 0 |
| #define TOPAZ_FWT_ENTRY_OUT_NODE_VLD_0 0x00000080 |
| #define TOPAZ_FWT_ENTRY_OUT_NODE_VLD_0_S 7 |
| #define TOPAZ_FWT_ENTRY_OUT_NODE_1 0x00007F00 |
| #define TOPAZ_FWT_ENTRY_OUT_NODE_1_S 8 |
| #define TOPAZ_FWT_ENTRY_OUT_NODE_VLD_1 0x00008000 |
| #define TOPAZ_FWT_ENTRY_OUT_NODE_VLD_1_S 15 |
| #define TOPAZ_FWT_ENTRY_OUT_NODE_2 0x007F0000 |
| #define TOPAZ_FWT_ENTRY_OUT_NODE_2_S 16 |
| #define TOPAZ_FWT_ENTRY_OUT_NODE_VLD_2 0x00800000 |
| #define TOPAZ_FWT_ENTRY_OUT_NODE_VLD_2_S 23 |
| #define TOPAZ_FWT_ENTRY_OUT_NODE_3 0x7F000000 |
| #define TOPAZ_FWT_ENTRY_OUT_NODE_3_S 24 |
| #define TOPAZ_FWT_ENTRY_OUT_NODE_VLD_3 0x80000000 |
| #define TOPAZ_FWT_ENTRY_OUT_NODE_VLD_3_S 31 |
| #define TOPAZ_FWT_ENTRY_OUT_NODE_4 0x007F0000 |
| #define TOPAZ_FWT_ENTRY_OUT_NODE_4_S 16 |
| #define TOPAZ_FWT_ENTRY_OUT_NODE_VLD_4 0x00800000 |
| #define TOPAZ_FWT_ENTRY_OUT_NODE_VLD_4_S 23 |
| #define TOPAZ_FWT_ENTRY_OUT_NODE_5 0x7F000000 |
| #define TOPAZ_FWT_ENTRY_OUT_NODE_5_S 24 |
| #define TOPAZ_FWT_ENTRY_OUT_NODE_VLD_5 0x80000000 |
| #define TOPAZ_FWT_ENTRY_OUT_NODE_VLD_5_S 31 |
| |
| #define TOPAZ_FWT_ENTRY_OUT_PORT 0x00003C00 |
| #define TOPAZ_FWT_ENTRY_OUT_PORT_S 10 |
| |
| #define TOPAZ_FWT_ENTRY_TIMESTAMP 0x000003FF |
| #define TOPAZ_FWT_ENTRY_TIMESTAMP_S 0 |
| |
| #define TOPAZ_FWT_HW_HASH_SHIFT 10 |
| #define TOPAZ_FWT_HW_HASH_MASK ((1 << TOPAZ_FWT_HW_HASH_SHIFT) - 1) |
| #define TOPAZ_FWT_HW_LEVEL1_ENTRIES (1 << TOPAZ_FWT_HW_HASH_SHIFT) |
| #define TOPAZ_FWT_HW_LEVEL2_ENTRIES 1024 |
| #define TOPAZ_FWT_HW_TOTAL_ENTRIES (TOPAZ_FWT_HW_LEVEL1_ENTRIES + TOPAZ_FWT_HW_LEVEL2_ENTRIES) |
| |
| /* |
| * VLAN table |
| */ |
| #define TOPAZ_VLAN_BASE_ADDR (TOPAZ_SWITCH_BASE_ADDR + 0x10000) |
| #define TOPAZ_VLAN_ENTRIES (1 << 12) /* 802.1Q VLAN ID */ |
| #define TOPAZ_VLAN_ENTRY_ADDR(x) (TOPAZ_VLAN_BASE_ADDR + 4 * (x)) |
| #define TOPAZ_VLAN_OUT_NODE 0x0000007F |
| #define TOPAZ_VLAN_OUT_NODE_S 0 |
| #define TOPAZ_VLAN_OUT_PORT 0x00000380 |
| #define TOPAZ_VLAN_OUT_PORT_S 7 |
| #define TOPAZ_VLAN_VALID 0x00000400 |
| #define TOPAZ_VLAN_VALID_S 10 |
| #define TOPAZ_VLAN_HW_BITMASK 0x000007ff |
| |
| /* TX AGG */ |
| #define TOPAZ_TX_AGG_BASE_ADDR 0xE5090000 |
| #define TOPAZ_TX_AGG_NODE_N_TID_Q_AVAIL(node) (TOPAZ_TX_AGG_BASE_ADDR + 0x000 + 4 * (node)) |
| #define TOPAZ_TX_AGG_NODE_N_TID_Q_AVAIL_MASK(val) ((val & 0xFFFF) << 16) |
| #define TOPAZ_TX_AGG_NODE_N_TID_Q_AVAIL_SUP(node) (TOPAZ_TX_AGG_BASE_ADDR + 0x200 + 4 * (node)) |
| #define TOPAZ_TX_AGG_NODE_N_TID_Q_AVAIL_SUP_MASK(val) ((val & 0xFFFF) << 16) |
| #define TOPAZ_TX_AGG_CSR (TOPAZ_TX_AGG_BASE_ADDR + 0x460) |
| #define TOPAZ_TX_AGG_TAC_MAP_MODE_64 0 |
| #define TOPAZ_TX_AGG_TAC_MAP_MODE_128 1 |
| #define TOPAZ_TX_AGG_AC 0xF0000000 |
| #define TOPAZ_TX_AGG_AC_S 28 |
| #define TOPAZ_TX_AGG_CPU_Q_ACCESS_SEM (TOPAZ_TX_AGG_BASE_ADDR + 0x464) |
| #define TOPAZ_TX_AGG_UC_Q_ACCESS_SEM (TOPAZ_TX_AGG_BASE_ADDR + 0x468) |
| #define TOPAZ_TX_AGG_TAC_CNTL (TOPAZ_TX_AGG_BASE_ADDR + 0x46C) |
| #ifdef TOPAZ_128_NODE_MODE |
| #define TOPAZ_TX_AGG_TAC_CNTL_NODE(node) ((node) & 0x7F) |
| #else |
| #define TOPAZ_TX_AGG_TAC_CNTL_NODE(node) ((node) & 0x3F) |
| #endif |
| #define TOPAZ_TX_AGG_TAC_CNTL_TID(tid) (((tid) & 0xF) << 8) |
| #define TOPAZ_TX_AGG_TAC_CNTL_READ_CMD(cmd) (((cmd) & 0x3) << 12) |
| #define TOPAZ_TX_AGG_TAC_CNTL_READ_DATA_VLD RUBY_BIT(29) |
| #define TOPAZ_TX_AGG_TAC_CNTL_READ RUBY_BIT(30) |
| #define TOPAZ_TX_AGG_TAC_CNTL_WRITE RUBY_BIT(31) |
| #define TOPAZ_TX_AGG_TAC_DATA (TOPAZ_TX_AGG_BASE_ADDR + 0x470) |
| #define TOPAZ_TX_AGG_TAC_DATA_AC(__ac) ((__ac) & 0x3) |
| #define TOPAZ_TX_AGG_TAC_DATA_PRIORITY(__pri) (((__pri) & 0xFF) << 2) |
| #ifdef TOPAZ_128_NODE_MODE |
| #define TOPAZ_TX_AGG_TAC_DATA_AC_LO 0x00000003 |
| #define TOPAZ_TX_AGG_TAC_DATA_AC_LO_S 0 |
| #define TOPAZ_TX_AGG_TAC_DATA_PRIORITY_LO 0x0000001c |
| #define TOPAZ_TX_AGG_TAC_DATA_PRIORITY_LO_S 2 |
| #define TOPAZ_TX_AGG_TAC_DATA_AC_HI 0x00000060 |
| #define TOPAZ_TX_AGG_TAC_DATA_AC_HI_S 5 |
| #define TOPAZ_TX_AGG_TAC_DATA_PRIORITY_HI 0x00000380 |
| #define TOPAZ_TX_AGG_TAC_DATA_PRIORITY_HI_S 7 |
| #endif |
| #define TOPAZ_TX_AGG_AC_N_NODE_TID(ac) (TOPAZ_TX_AGG_BASE_ADDR + 0x478 + 4 * (ac)) |
| #define TOPAZ_TX_AGG_AC_N_STAT_PTR(ac) (TOPAZ_TX_AGG_BASE_ADDR + 0x488 + 4 * (ac)) |
| #define TOPAZ_TX_AGG_Q_FULL_THRESH (TOPAZ_TX_AGG_BASE_ADDR + 0x498) |
| #define TOPAZ_TX_AGG_Q_FULL_THRESH_VAL(q0, q1, q2, q3) (((q0) & 0xF) | (((q1) & 0xF) << 4) | (((q2) & 0xF) << 8) | (((q3) & 0xF) << 12)) |
| #define TOPAZ_TX_AGG_CPU_IRQ_CSR (TOPAZ_TX_AGG_BASE_ADDR + 0x49C) |
| #define TOPAZ_TX_AGG_STATUS_IRQ (TOPAZ_TX_AGG_BASE_ADDR + 0x4A0) |
| #define TOPAZ_TX_AGG_AC_N_NODE_TID_NO_SEL(ac) (TOPAZ_TX_AGG_BASE_ADDR + 0x4A4 + 4 * (ac)) |
| #define TOPAZ_TX_AGG_TAC_CNTL_READ_CMD_NODE_TAB 0 |
| #define TOPAZ_TX_AGG_TAC_CNTL_READ_CMD_AVAIL_LO 1 |
| #define TOPAZ_TX_AGG_TAC_CNTL_READ_CMD_AVAIL_HI 3 |
| #define TOPAZ_TX_AGG_MAX_NODE_NUM 128 |
| #define TOPAZ_TX_AGG_HALF_MAX_NODE_NUM (TOPAZ_TX_AGG_MAX_NODE_NUM >> 1) |
| |
| /* |
| * MuC/Lhost new interrupts. |
| * Old interrupts (even changed number) are in ruby_platform, RUBY_IRQ_* |
| */ |
| #define TOPAZ_IRQ_TQE (5) |
| #define TOPAZ_IRQ_HDMA0 (RUBY_IRQ_DMA0) |
| #define TOPAZ_IRQ_HBM (RUBY_IRQ_DMA1) |
| #define TOPAZ_IRQ_HDMA1 (RUBY_IRQ_DMA3) |
| #define TOPAZ_IRQ_PCIE (28) |
| #define TOPAZ_IRQ_IPC_A2M (18) |
| #define TOPAZ_IQR_TQE_DSP (19) |
| #define TOPAZ_IRQ_PCIE_DMA (RUBY_IRQ_DMA2) |
| #define TOPAZ_IRQ_IPC4 (29) |
| #define TOPAZ_MUC_IRQ_BB_PER_PKT (31) |
| #define TOPAZ_HBM_INT_EN RUBY_BIT(31) |
| #define TOPAZ_PCIE_INTX_CLR_MASK RUBY_BIT(11) |
| #define TOPAZ_PCIE_INT_MASK RUBY_PCIE_INT_MASK |
| #define TOPAZ_PCIE_MSI_MASK RUBY_PCIE_MSI_MASK |
| #define TOPAZ_PCIE_MSI_EN RUBY_BIT(0) |
| #define TOPAZ_PCIE_MSI_BASE 0xE9000050 |
| #define TOPAZ_PCIE_MSI_CAP (TOPAZ_PCIE_MSI_BASE + 0x0) |
| |
| #define TOPAZ_PCIE_EXP_DEVCTL (0xE9000078) |
| |
| /* MSI defines to be used in Topaz PCIe host driver */ |
| #define TOPAZ_PCIE_MSI_REGION RUBY_PCIE_MSI_REGION |
| #define TOPAZ_MSI_ADDR_LOWER RUBY_MSI_ADDR_LOWER |
| #define TOPAZ_MSI_ADDR_UPPER RUBY_MSI_ADDR_UPPER |
| #define TOPAZ_MSI_INT_ENABLE RUBY_MSI_INT_ENABLE |
| |
| /* AHB Bus monitors */ |
| #define TOPAZ_BUSMON_INTR_STATUS (RUBY_SYS_CTL_BASE_ADDR + 0x015c) |
| #define TOPAZ_BUSMON_INTR_MASK (RUBY_SYS_CTL_BASE_ADDR + 0x0160) |
| #define TOPAZ_BUSMON_INTR_MASK_TIMEOUT_EN(master) BIT((master) * 2 + 0) |
| #define TOPAZ_BUSMON_INTR_MASK_RANGE_CHECK_EN(master) BIT((master) * 2 + 1) |
| #define TOPAZ_BUSMON_DEBUG_VIEW (RUBY_SYS_CTL_BASE_ADDR + 0x0164) |
| #define TOPAZ_BUSMON_DEBUG_VIEW_MASTER(x) (((x) & 0x3) << 0) |
| #define TOPAZ_BUSMON_DEBUG_VIEW_DATA_SEL(x) (((x) & 0x7) << 2) |
| #define TOPAZ_BUSMON_DEBUG_STATUS (RUBY_SYS_CTL_BASE_ADDR + 0x0168) |
| #define TOPAZ_BUSMON_CTL_BASE_ADDR (RUBY_SYS_CTL_BASE_ADDR + 0x0200) |
| #define TOPAZ_BUSMON_CTL(core) (TOPAZ_BUSMON_CTL_BASE_ADDR + ((core) * 0x40)) |
| #define __TOPAZ_BUSMON_CTL_RANGE(core, range) (TOPAZ_BUSMON_CTL(core) + 0x8 + ((range) * 0x8)) |
| #define TOPAZ_BUSMON_CTL_RANGE_LOW(core, range) (__TOPAZ_BUSMON_CTL_RANGE((core), (range)) + 0x0) |
| #define TOPAZ_BUSMON_CTL_RANGE_HIGH(core, range) (__TOPAZ_BUSMON_CTL_RANGE((core), (range)) + 0x4) |
| #define TOPAZ_BUSMON_HREADY_EN BIT(0) |
| #define TOPAZ_BUSMON_TIMER_INT_EN BIT(1) |
| #define TOPAZ_BUSMON_TIMER_ERROR_EN BIT(2) |
| #define TOPAZ_BUSMON_ADDR_CHECK_EN BIT(3) |
| #define TOPAZ_BUSMON_REGION_VALID(x) (((x) & 0xF) << 4) |
| #define TOPAZ_BUSMON_TIMEOUT(cycles) (((cycles) & 0x3FF) << 8) |
| #define TOPAZ_BUSMON_BLOCK_TRANS_EN BIT(18) |
| #define TOPAZ_BUSMON_OUTSIDE_ADDR_CHECK BIT(19) |
| |
| /* AHB Bus monitor masters */ |
| #define TOPAZ_BUSMON_LHOST 0 |
| #define TOPAZ_BUSMON_MUC 1 |
| #define TOPAZ_BUSMON_DSP 2 |
| #define TOPAZ_BUSMON_AUC 3 |
| #define TOPAZ_BUSMON_WMAC 4 |
| #define TOPAZ_BUSMON_PCIE 5 |
| #define TOPAZ_BUSMON_SWE 6 |
| #define TOPAZ_BUSMON_EMAC 7 |
| |
| #define TOPAZ_BUSMON_MASTER_NAMES { "lhost", "muc", "dsp", "auc", "wmac", "pcie", "swe", "emac" } |
| |
| /* AHB Bus monitor debug data select */ |
| #define TOPAZ_BUSMON_ADDR 0 |
| #define TOPAZ_BUSMON_WR_L32 1 |
| #define TOPAZ_BUSMON_WR_H32 2 |
| #define TOPAZ_BUSMON_RD_L32 3 |
| #define TOPAZ_BUSMON_RD_H32 4 |
| #define TOPAZ_BUSMON_CTRL0 5 |
| #define TOPAZ_BUSMON_CTRL1 6 |
| #define TOPAZ_BUSMON_CTRL2 7 |
| #define TOPAZ_BUSMON_DEBUG_MAX 8 |
| |
| /* GPIO Registers */ |
| #define RUBY_GPIO3_PWM1 (RUBY_GPIO1_PWM0 + 4) |
| #define RUBY_GPIO12_PWM3 (RUBY_GPIO1_PWM0 + 12) |
| #define RUBY_GPIO13_PWM4 (RUBY_GPIO1_PWM0 + 16) |
| #define RUBY_GPIO15_PWM5 (RUBY_GPIO1_PWM0 + 20) |
| #define RUBY_GPIO16_PWM6 (RUBY_GPIO1_PWM0 + 24) |
| #define RUBY_GPIO_PWM_LOW_SHIFT (0) |
| #define RUBY_GPIO_PWM_HIGH_SHIFT (8) |
| #define RUBY_GPIO_PWM_ENABLE (BIT(16)) |
| #define RUBY_GPIO_PWM_MAX_COUNT (255) |
| |
| /* Interrupt lines */ |
| #define TOPAZ_IRQ_MISC_WDT (57) |
| #define TOPAZ_IRQ_MISC_SPI1 (58) |
| #define TOPAZ_IRQ_MISC_AHB_MON (61) |
| #define TOPAZ_IRQ_MISC_HBM (62) |
| #define TOPAZ_IRQ_MISC_FWT (63) |
| #define TOPAZ_IRQ_MISC_EXT_IRQ_COUNT (8) |
| #define TOPAZ_IRQ_MISC_RST_CAUSE_START (9) |
| |
| /* RESET CAUSE */ |
| #define TOPAZ_SYS_CTL_INTR_TIMER_MSK(t) (1 << (3 + (t))) |
| |
| #endif /* #ifndef __TOPAZ_PLATFORM_H */ |
