| /* |
| * arch/arm/mach-spear6xx/clock.c |
| * |
| * SPEAr6xx machines clock framework source file |
| * |
| * Copyright (C) 2009 ST Microelectronics |
| * Viresh Kumar<viresh.kumar@st.com> |
| * |
| * This file is licensed under the terms of the GNU General Public |
| * License version 2. This program is licensed "as is" without any |
| * warranty of any kind, whether express or implied. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <mach/misc_regs.h> |
| #include <plat/clock.h> |
| |
| /* root clks */ |
| /* 32 KHz oscillator clock */ |
| static struct clk osc_32k_clk = { |
| .flags = ALWAYS_ENABLED, |
| .rate = 32000, |
| }; |
| |
| /* 30 MHz oscillator clock */ |
| static struct clk osc_30m_clk = { |
| .flags = ALWAYS_ENABLED, |
| .rate = 30000000, |
| }; |
| |
| /* clock derived from 32 KHz osc clk */ |
| /* rtc clock */ |
| static struct clk rtc_clk = { |
| .pclk = &osc_32k_clk, |
| .en_reg = PERIP1_CLK_ENB, |
| .en_reg_bit = RTC_CLK_ENB, |
| .recalc = &follow_parent, |
| }; |
| |
| /* clock derived from 30 MHz osc clk */ |
| /* pll1 configuration structure */ |
| static struct pll_clk_config pll1_config = { |
| .mode_reg = PLL1_CTR, |
| .cfg_reg = PLL1_FRQ, |
| }; |
| |
| /* PLL1 clock */ |
| static struct clk pll1_clk = { |
| .pclk = &osc_30m_clk, |
| .en_reg = PLL1_CTR, |
| .en_reg_bit = PLL_ENABLE, |
| .recalc = &pll1_clk_recalc, |
| .private_data = &pll1_config, |
| }; |
| |
| /* PLL3 48 MHz clock */ |
| static struct clk pll3_48m_clk = { |
| .flags = ALWAYS_ENABLED, |
| .pclk = &osc_30m_clk, |
| .rate = 48000000, |
| }; |
| |
| /* watch dog timer clock */ |
| static struct clk wdt_clk = { |
| .flags = ALWAYS_ENABLED, |
| .pclk = &osc_30m_clk, |
| .recalc = &follow_parent, |
| }; |
| |
| /* clock derived from pll1 clk */ |
| /* cpu clock */ |
| static struct clk cpu_clk = { |
| .flags = ALWAYS_ENABLED, |
| .pclk = &pll1_clk, |
| .recalc = &follow_parent, |
| }; |
| |
| /* ahb configuration structure */ |
| static struct bus_clk_config ahb_config = { |
| .reg = CORE_CLK_CFG, |
| .mask = PLL_HCLK_RATIO_MASK, |
| .shift = PLL_HCLK_RATIO_SHIFT, |
| }; |
| |
| /* ahb clock */ |
| static struct clk ahb_clk = { |
| .flags = ALWAYS_ENABLED, |
| .pclk = &pll1_clk, |
| .recalc = &bus_clk_recalc, |
| .private_data = &ahb_config, |
| }; |
| |
| /* uart parents */ |
| static struct pclk_info uart_pclk_info[] = { |
| { |
| .pclk = &pll1_clk, |
| .pclk_mask = AUX_CLK_PLL1_MASK, |
| .scalable = 1, |
| }, { |
| .pclk = &pll3_48m_clk, |
| .pclk_mask = AUX_CLK_PLL3_MASK, |
| .scalable = 0, |
| }, |
| }; |
| |
| /* uart parent select structure */ |
| static struct pclk_sel uart_pclk_sel = { |
| .pclk_info = uart_pclk_info, |
| .pclk_count = ARRAY_SIZE(uart_pclk_info), |
| .pclk_sel_reg = PERIP_CLK_CFG, |
| .pclk_sel_mask = UART_CLK_MASK, |
| }; |
| |
| /* uart configurations */ |
| static struct aux_clk_config uart_config = { |
| .synth_reg = UART_CLK_SYNT, |
| }; |
| |
| /* uart0 clock */ |
| static struct clk uart0_clk = { |
| .en_reg = PERIP1_CLK_ENB, |
| .en_reg_bit = UART0_CLK_ENB, |
| .pclk_sel = &uart_pclk_sel, |
| .pclk_sel_shift = UART_CLK_SHIFT, |
| .recalc = &aux_clk_recalc, |
| .private_data = &uart_config, |
| }; |
| |
| /* uart1 clock */ |
| static struct clk uart1_clk = { |
| .en_reg = PERIP1_CLK_ENB, |
| .en_reg_bit = UART1_CLK_ENB, |
| .pclk_sel = &uart_pclk_sel, |
| .pclk_sel_shift = UART_CLK_SHIFT, |
| .recalc = &aux_clk_recalc, |
| .private_data = &uart_config, |
| }; |
| |
| /* firda configurations */ |
| static struct aux_clk_config firda_config = { |
| .synth_reg = FIRDA_CLK_SYNT, |
| }; |
| |
| /* firda parents */ |
| static struct pclk_info firda_pclk_info[] = { |
| { |
| .pclk = &pll1_clk, |
| .pclk_mask = AUX_CLK_PLL1_MASK, |
| .scalable = 1, |
| }, { |
| .pclk = &pll3_48m_clk, |
| .pclk_mask = AUX_CLK_PLL3_MASK, |
| .scalable = 0, |
| }, |
| }; |
| |
| /* firda parent select structure */ |
| static struct pclk_sel firda_pclk_sel = { |
| .pclk_info = firda_pclk_info, |
| .pclk_count = ARRAY_SIZE(firda_pclk_info), |
| .pclk_sel_reg = PERIP_CLK_CFG, |
| .pclk_sel_mask = FIRDA_CLK_MASK, |
| }; |
| |
| /* firda clock */ |
| static struct clk firda_clk = { |
| .en_reg = PERIP1_CLK_ENB, |
| .en_reg_bit = FIRDA_CLK_ENB, |
| .pclk_sel = &firda_pclk_sel, |
| .pclk_sel_shift = FIRDA_CLK_SHIFT, |
| .recalc = &aux_clk_recalc, |
| .private_data = &firda_config, |
| }; |
| |
| /* clcd configurations */ |
| static struct aux_clk_config clcd_config = { |
| .synth_reg = CLCD_CLK_SYNT, |
| }; |
| |
| /* clcd parents */ |
| static struct pclk_info clcd_pclk_info[] = { |
| { |
| .pclk = &pll1_clk, |
| .pclk_mask = AUX_CLK_PLL1_MASK, |
| .scalable = 1, |
| }, { |
| .pclk = &pll3_48m_clk, |
| .pclk_mask = AUX_CLK_PLL3_MASK, |
| .scalable = 0, |
| }, |
| }; |
| |
| /* clcd parent select structure */ |
| static struct pclk_sel clcd_pclk_sel = { |
| .pclk_info = clcd_pclk_info, |
| .pclk_count = ARRAY_SIZE(clcd_pclk_info), |
| .pclk_sel_reg = PERIP_CLK_CFG, |
| .pclk_sel_mask = CLCD_CLK_MASK, |
| }; |
| |
| /* clcd clock */ |
| static struct clk clcd_clk = { |
| .en_reg = PERIP1_CLK_ENB, |
| .en_reg_bit = CLCD_CLK_ENB, |
| .pclk_sel = &clcd_pclk_sel, |
| .pclk_sel_shift = CLCD_CLK_SHIFT, |
| .recalc = &aux_clk_recalc, |
| .private_data = &clcd_config, |
| }; |
| |
| /* gpt parents */ |
| static struct pclk_info gpt_pclk_info[] = { |
| { |
| .pclk = &pll1_clk, |
| .pclk_mask = AUX_CLK_PLL1_MASK, |
| .scalable = 1, |
| }, { |
| .pclk = &pll3_48m_clk, |
| .pclk_mask = AUX_CLK_PLL3_MASK, |
| .scalable = 0, |
| }, |
| }; |
| |
| /* gpt parent select structure */ |
| static struct pclk_sel gpt_pclk_sel = { |
| .pclk_info = gpt_pclk_info, |
| .pclk_count = ARRAY_SIZE(gpt_pclk_info), |
| .pclk_sel_reg = PERIP_CLK_CFG, |
| .pclk_sel_mask = GPT_CLK_MASK, |
| }; |
| |
| /* gpt0_1 configurations */ |
| static struct aux_clk_config gpt0_1_config = { |
| .synth_reg = PRSC1_CLK_CFG, |
| }; |
| |
| /* gpt0 ARM1 subsystem timer clock */ |
| static struct clk gpt0_clk = { |
| .flags = ALWAYS_ENABLED, |
| .pclk_sel = &gpt_pclk_sel, |
| .pclk_sel_shift = GPT0_CLK_SHIFT, |
| .recalc = &gpt_clk_recalc, |
| .private_data = &gpt0_1_config, |
| }; |
| |
| /* gpt1 timer clock */ |
| static struct clk gpt1_clk = { |
| .flags = ALWAYS_ENABLED, |
| .pclk_sel = &gpt_pclk_sel, |
| .pclk_sel_shift = GPT1_CLK_SHIFT, |
| .recalc = &gpt_clk_recalc, |
| .private_data = &gpt0_1_config, |
| }; |
| |
| /* gpt2 configurations */ |
| static struct aux_clk_config gpt2_config = { |
| .synth_reg = PRSC2_CLK_CFG, |
| }; |
| |
| /* gpt2 timer clock */ |
| static struct clk gpt2_clk = { |
| .en_reg = PERIP1_CLK_ENB, |
| .en_reg_bit = GPT2_CLK_ENB, |
| .pclk_sel = &gpt_pclk_sel, |
| .pclk_sel_shift = GPT2_CLK_SHIFT, |
| .recalc = &gpt_clk_recalc, |
| .private_data = &gpt2_config, |
| }; |
| |
| /* gpt3 configurations */ |
| static struct aux_clk_config gpt3_config = { |
| .synth_reg = PRSC3_CLK_CFG, |
| }; |
| |
| /* gpt3 timer clock */ |
| static struct clk gpt3_clk = { |
| .en_reg = PERIP1_CLK_ENB, |
| .en_reg_bit = GPT3_CLK_ENB, |
| .pclk_sel = &gpt_pclk_sel, |
| .pclk_sel_shift = GPT3_CLK_SHIFT, |
| .recalc = &gpt_clk_recalc, |
| .private_data = &gpt3_config, |
| }; |
| |
| /* clock derived from pll3 clk */ |
| /* usbh0 clock */ |
| static struct clk usbh0_clk = { |
| .pclk = &pll3_48m_clk, |
| .en_reg = PERIP1_CLK_ENB, |
| .en_reg_bit = USBH0_CLK_ENB, |
| .recalc = &follow_parent, |
| }; |
| |
| /* usbh1 clock */ |
| static struct clk usbh1_clk = { |
| .pclk = &pll3_48m_clk, |
| .en_reg = PERIP1_CLK_ENB, |
| .en_reg_bit = USBH1_CLK_ENB, |
| .recalc = &follow_parent, |
| }; |
| |
| /* usbd clock */ |
| static struct clk usbd_clk = { |
| .pclk = &pll3_48m_clk, |
| .en_reg = PERIP1_CLK_ENB, |
| .en_reg_bit = USBD_CLK_ENB, |
| .recalc = &follow_parent, |
| }; |
| |
| /* clock derived from ahb clk */ |
| /* apb configuration structure */ |
| static struct bus_clk_config apb_config = { |
| .reg = CORE_CLK_CFG, |
| .mask = HCLK_PCLK_RATIO_MASK, |
| .shift = HCLK_PCLK_RATIO_SHIFT, |
| }; |
| |
| /* apb clock */ |
| static struct clk apb_clk = { |
| .flags = ALWAYS_ENABLED, |
| .pclk = &ahb_clk, |
| .recalc = &bus_clk_recalc, |
| .private_data = &apb_config, |
| }; |
| |
| /* i2c clock */ |
| static struct clk i2c_clk = { |
| .pclk = &ahb_clk, |
| .en_reg = PERIP1_CLK_ENB, |
| .en_reg_bit = I2C_CLK_ENB, |
| .recalc = &follow_parent, |
| }; |
| |
| /* dma clock */ |
| static struct clk dma_clk = { |
| .pclk = &ahb_clk, |
| .en_reg = PERIP1_CLK_ENB, |
| .en_reg_bit = DMA_CLK_ENB, |
| .recalc = &follow_parent, |
| }; |
| |
| /* jpeg clock */ |
| static struct clk jpeg_clk = { |
| .pclk = &ahb_clk, |
| .en_reg = PERIP1_CLK_ENB, |
| .en_reg_bit = JPEG_CLK_ENB, |
| .recalc = &follow_parent, |
| }; |
| |
| /* gmac clock */ |
| static struct clk gmac_clk = { |
| .pclk = &ahb_clk, |
| .en_reg = PERIP1_CLK_ENB, |
| .en_reg_bit = GMAC_CLK_ENB, |
| .recalc = &follow_parent, |
| }; |
| |
| /* smi clock */ |
| static struct clk smi_clk = { |
| .pclk = &ahb_clk, |
| .en_reg = PERIP1_CLK_ENB, |
| .en_reg_bit = SMI_CLK_ENB, |
| .recalc = &follow_parent, |
| }; |
| |
| /* fsmc clock */ |
| static struct clk fsmc_clk = { |
| .pclk = &ahb_clk, |
| .en_reg = PERIP1_CLK_ENB, |
| .en_reg_bit = FSMC_CLK_ENB, |
| .recalc = &follow_parent, |
| }; |
| |
| /* clock derived from apb clk */ |
| /* adc clock */ |
| static struct clk adc_clk = { |
| .pclk = &apb_clk, |
| .en_reg = PERIP1_CLK_ENB, |
| .en_reg_bit = ADC_CLK_ENB, |
| .recalc = &follow_parent, |
| }; |
| |
| /* ssp0 clock */ |
| static struct clk ssp0_clk = { |
| .pclk = &apb_clk, |
| .en_reg = PERIP1_CLK_ENB, |
| .en_reg_bit = SSP0_CLK_ENB, |
| .recalc = &follow_parent, |
| }; |
| |
| /* ssp1 clock */ |
| static struct clk ssp1_clk = { |
| .pclk = &apb_clk, |
| .en_reg = PERIP1_CLK_ENB, |
| .en_reg_bit = SSP1_CLK_ENB, |
| .recalc = &follow_parent, |
| }; |
| |
| /* ssp2 clock */ |
| static struct clk ssp2_clk = { |
| .pclk = &apb_clk, |
| .en_reg = PERIP1_CLK_ENB, |
| .en_reg_bit = SSP2_CLK_ENB, |
| .recalc = &follow_parent, |
| }; |
| |
| /* gpio0 ARM subsystem clock */ |
| static struct clk gpio0_clk = { |
| .flags = ALWAYS_ENABLED, |
| .pclk = &apb_clk, |
| .recalc = &follow_parent, |
| }; |
| |
| /* gpio1 clock */ |
| static struct clk gpio1_clk = { |
| .pclk = &apb_clk, |
| .en_reg = PERIP1_CLK_ENB, |
| .en_reg_bit = GPIO1_CLK_ENB, |
| .recalc = &follow_parent, |
| }; |
| |
| /* gpio2 clock */ |
| static struct clk gpio2_clk = { |
| .pclk = &apb_clk, |
| .en_reg = PERIP1_CLK_ENB, |
| .en_reg_bit = GPIO2_CLK_ENB, |
| .recalc = &follow_parent, |
| }; |
| |
| /* array of all spear 6xx clock lookups */ |
| static struct clk_lookup spear_clk_lookups[] = { |
| /* root clks */ |
| { .con_id = "osc_32k_clk", .clk = &osc_32k_clk}, |
| { .con_id = "osc_30m_clk", .clk = &osc_30m_clk}, |
| /* clock derived from 32 KHz os clk */ |
| { .dev_id = "rtc", .clk = &rtc_clk}, |
| /* clock derived from 30 MHz os clk */ |
| { .con_id = "pll1_clk", .clk = &pll1_clk}, |
| { .con_id = "pll3_48m_clk", .clk = &pll3_48m_clk}, |
| { .dev_id = "wdt", .clk = &wdt_clk}, |
| /* clock derived from pll1 clk */ |
| { .con_id = "cpu_clk", .clk = &cpu_clk}, |
| { .con_id = "ahb_clk", .clk = &ahb_clk}, |
| { .dev_id = "uart0", .clk = &uart0_clk}, |
| { .dev_id = "uart1", .clk = &uart1_clk}, |
| { .dev_id = "firda", .clk = &firda_clk}, |
| { .dev_id = "clcd", .clk = &clcd_clk}, |
| { .dev_id = "gpt0", .clk = &gpt0_clk}, |
| { .dev_id = "gpt1", .clk = &gpt1_clk}, |
| { .dev_id = "gpt2", .clk = &gpt2_clk}, |
| { .dev_id = "gpt3", .clk = &gpt3_clk}, |
| /* clock derived from pll3 clk */ |
| { .dev_id = "usbh0", .clk = &usbh0_clk}, |
| { .dev_id = "usbh1", .clk = &usbh1_clk}, |
| { .dev_id = "usbd", .clk = &usbd_clk}, |
| /* clock derived from ahb clk */ |
| { .con_id = "apb_clk", .clk = &apb_clk}, |
| { .dev_id = "i2c", .clk = &i2c_clk}, |
| { .dev_id = "dma", .clk = &dma_clk}, |
| { .dev_id = "jpeg", .clk = &jpeg_clk}, |
| { .dev_id = "gmac", .clk = &gmac_clk}, |
| { .dev_id = "smi", .clk = &smi_clk}, |
| { .dev_id = "fsmc", .clk = &fsmc_clk}, |
| /* clock derived from apb clk */ |
| { .dev_id = "adc", .clk = &adc_clk}, |
| { .dev_id = "ssp0", .clk = &ssp0_clk}, |
| { .dev_id = "ssp1", .clk = &ssp1_clk}, |
| { .dev_id = "ssp2", .clk = &ssp2_clk}, |
| { .dev_id = "gpio0", .clk = &gpio0_clk}, |
| { .dev_id = "gpio1", .clk = &gpio1_clk}, |
| { .dev_id = "gpio2", .clk = &gpio2_clk}, |
| }; |
| |
| void __init clk_init(void) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++) |
| clk_register(&spear_clk_lookups[i]); |
| |
| recalc_root_clocks(); |
| } |