include/common/topaz_rfic6_config

/*
 * (C) Copyright 2010 Quantenna Communications Inc.
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

/*
 * Header file which describes Topaz platform.
 * Has to be used by both kernel and bootloader.
 */

#ifndef __TOPAZ_CONFIG_H
#define __TOPAZ_CONFIG_H

#include "current_platform.h"

#if !TOPAZ_FPGA_PLATFORM
#undef TOPAZ_ICACHE_WORKAROUND
#endif

/*
 * Control registers move depending on unified + alias bit
 */

#define TOPAZ_MMAP_UNIFIED	0
#define TOPAZ_MMAP_ALIAS	0
#define TOPAZ_RX_ACCELERATE	1

/*
 * VSP/QTM
 * Macro TOPAZ_QTM is used to help identify changes between original VSP and QTM.
 * In Lhost kernel driver, it must be used within CONFIG_QVSP(in kernel .config).
 * CONFIG_QVSP	TOPAZ_QTM	ruby		topaz
 * Y		1		invalid		*QTM works
 * Y		0		*VSP works	VSP alive but doesn't work for HDP
 * N		1		invalid		*no VSP/QTM
 * N		0		*no VSP		no VSP/QTM, and no QTM changes in MuC and AuC
 * So generally, sololy changing CONFIG_QVSP works for both ruby and topaz as indicated by *.
 * But to throughly clean QTM code in AuC and MuC, disable TOPAZ_QTM in topaz below.
 */
	#define TOPAZ_QTM		1

/*
 * HBM buffer process in MuC requires that TOPAZ_AUC_RX is dependent on TOPAZ_RX_ACCELERATE, so let's
 * enable TOPAZ_AUC_RX only when TOPAZ_RX_ACCELERATE is enabled.
 */
#if TOPAZ_RX_ACCELERATE
#define TOPAZ_AUC_RX	1
#else
#define TOPAZ_AUC_RX	0
#endif

#if TOPAZ_MMAP_ALIAS && !TOPAZ_MMAP_UNIFIED
	#error Alias map requires unified map
#endif

#if TOPAZ_MMAP_ALIAS
	#define TOPAZ_ALIAS_MAP_SWITCH(a, b)	(b)
#else
	#define TOPAZ_ALIAS_MAP_SWITCH(a, b)	(a)
#endif

/* Topaz fixed phy addresses */
#define TOPAZ_FPGAA_PHY0_ADDR		2
#define TOPAZ_FPGAA_PHY1_ADDR		3
#define TOPAZ_FPGAB_PHY0_ADDR		4
#define TOPAZ_FPGAB_PHY1_ADDR		1
#define TOPAZ_PHY0_ADDR				1
#define TOPAZ_PHY1_ADDR				3

#ifndef TOPAZ_FPGA_PLATFORM
	#define TOPAZ_FPGA_PLATFORM	0
#endif

/* Definition indicates that Topaz platform is FPGA */
#if TOPAZ_FPGA_PLATFORM
	/* CLK speeds are in MHz and 1/10th the speed of actual ASIC */
	#define TOPAZ_SERIAL_BAUD	38400
	#define TOPAZ_APB_CLK		12500000
	#define TOPAZ_AHB_CLK		25000000
	#define TOPAZ_CPU_CLK		50000000
	#define RUBY_FPGA_DDR
#else
	#define TOPAZ_SERIAL_BAUD	115200
	#define TOPAZ_APB_CLK		125000000
	#define TOPAZ_AHB_CLK		250000000
	#define TOPAZ_CPU_CLK		500000000
	#define RUBY_ASIC_DDR
#endif /* #if TOPAZ_FPGA_PLATFORM */

/*
 * Setting UPF_SPD_FLAG gives a developer the option to set the
 * flag to match a UPF_ define from <linux>/include/linux/serial_core.h
 * or set the value to 0 to use the default baud rate setting DEFAULT_BAUD
 */
#define UPF_SPD_FLAG	0
#define DEFAULT_BAUD	TOPAZ_SERIAL_BAUD

/*
 * Re-use Ruby defines to simplify the number of changes required
 * to compile new binaries for Topaz
 */
#define RUBY_SERIAL_BAUD	TOPAZ_SERIAL_BAUD
#define RUBY_FIXED_DEV_CLK	TOPAZ_APB_CLK
#define RUBY_FIXED_CPU_CLK	TOPAZ_CPU_CLK

#ifdef PLATFORM_DEFAULT_BOARD_ID
        #define DEFAULT_BOARD_ID	PLATFORM_DEFAULT_BOARD_ID
#else
	/* Default board id used to match Topaz setting if there is no SPI Flash */
	#define DEFAULT_BOARD_ID	QTN_TOPAZ_BB_BOARD
#endif /* TOPAZ_DEFAULT_BOARD_ID */

#ifndef PLATFORM_ARC7_MMU_VER
	#define PLATFORM_ARC7_MMU_VER	2
#endif

#define CONFIG_RUBY_BROKEN_IPC_IRQS	0

#define RUBY_IPC_HI_IRQ(bit_num)	((bit_num) + 8)
#define RUBY_M2L_IPC_HI_IRQ(bit_num)	(bit_num)

#define PLATFORM_REG_SWITCH(reg1, reg2)	(reg2)

#define writel_topaz(a, b)		writel(a, b)
#define writel_ruby(a, b)

#define QTN_VLAN_LLC_ENCAP		1

#define TOPAZ_128_NODE_MODE		1

#endif /* #ifndef __TOPAZ_CONFIG_H */