| /* |
| * cx18 functions to query card hardware |
| * |
| * Derived from ivtv-cards.c |
| * |
| * Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl> |
| * Copyright (C) 2008 Andy Walls <awalls@md.metrocast.net> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| |
| /* hardware flags */ |
| #define CX18_HW_TUNER (1 << 0) |
| #define CX18_HW_TVEEPROM (1 << 1) |
| #define CX18_HW_CS5345 (1 << 2) |
| #define CX18_HW_DVB (1 << 3) |
| #define CX18_HW_418_AV (1 << 4) |
| #define CX18_HW_GPIO_MUX (1 << 5) |
| #define CX18_HW_GPIO_RESET_CTRL (1 << 6) |
| #define CX18_HW_Z8F0811_IR_TX_HAUP (1 << 7) |
| #define CX18_HW_Z8F0811_IR_RX_HAUP (1 << 8) |
| #define CX18_HW_Z8F0811_IR_HAUP (CX18_HW_Z8F0811_IR_RX_HAUP | \ |
| CX18_HW_Z8F0811_IR_TX_HAUP) |
| |
| #define CX18_HW_IR_ANY (CX18_HW_Z8F0811_IR_RX_HAUP | \ |
| CX18_HW_Z8F0811_IR_TX_HAUP) |
| |
| /* video inputs */ |
| #define CX18_CARD_INPUT_VID_TUNER 1 |
| #define CX18_CARD_INPUT_SVIDEO1 2 |
| #define CX18_CARD_INPUT_SVIDEO2 3 |
| #define CX18_CARD_INPUT_COMPOSITE1 4 |
| #define CX18_CARD_INPUT_COMPOSITE2 5 |
| #define CX18_CARD_INPUT_COMPONENT1 6 |
| |
| /* audio inputs */ |
| #define CX18_CARD_INPUT_AUD_TUNER 1 |
| #define CX18_CARD_INPUT_LINE_IN1 2 |
| #define CX18_CARD_INPUT_LINE_IN2 3 |
| |
| #define CX18_CARD_MAX_VIDEO_INPUTS 6 |
| #define CX18_CARD_MAX_AUDIO_INPUTS 3 |
| #define CX18_CARD_MAX_TUNERS 2 |
| |
| /* V4L2 capability aliases */ |
| #define CX18_CAP_ENCODER (V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_TUNER | \ |
| V4L2_CAP_AUDIO | V4L2_CAP_READWRITE | \ |
| V4L2_CAP_VBI_CAPTURE | V4L2_CAP_SLICED_VBI_CAPTURE) |
| |
| struct cx18_card_video_input { |
| u8 video_type; /* video input type */ |
| u8 audio_index; /* index in cx18_card_audio_input array */ |
| u32 video_input; /* hardware video input */ |
| }; |
| |
| struct cx18_card_audio_input { |
| u8 audio_type; /* audio input type */ |
| u32 audio_input; /* hardware audio input */ |
| u16 muxer_input; /* hardware muxer input for boards with a |
| multiplexer chip */ |
| }; |
| |
| struct cx18_card_pci_info { |
| u16 device; |
| u16 subsystem_vendor; |
| u16 subsystem_device; |
| }; |
| |
| /* GPIO definitions */ |
| |
| /* The mask is the set of bits used by the operation */ |
| |
| struct cx18_gpio_init { /* set initial GPIO DIR and OUT values */ |
| u32 direction; /* DIR setting. Leave to 0 if no init is needed */ |
| u32 initial_value; |
| }; |
| |
| struct cx18_gpio_i2c_slave_reset { |
| u32 active_lo_mask; /* GPIO outputs that reset i2c chips when low */ |
| u32 active_hi_mask; /* GPIO outputs that reset i2c chips when high */ |
| int msecs_asserted; /* time period reset must remain asserted */ |
| int msecs_recovery; /* time after deassert for chips to be ready */ |
| u32 ir_reset_mask; /* GPIO to reset the Zilog Z8F0811 IR contoller */ |
| }; |
| |
| struct cx18_gpio_audio_input { /* select tuner/line in input */ |
| u32 mask; /* leave to 0 if not supported */ |
| u32 tuner; |
| u32 linein; |
| u32 radio; |
| }; |
| |
| struct cx18_card_tuner { |
| v4l2_std_id std; /* standard for which the tuner is suitable */ |
| int tuner; /* tuner ID (from tuner.h) */ |
| }; |
| |
| struct cx18_card_tuner_i2c { |
| unsigned short radio[2];/* radio tuner i2c address to probe */ |
| unsigned short demod[2];/* demodulator i2c address to probe */ |
| unsigned short tv[4]; /* tv tuner i2c addresses to probe */ |
| }; |
| |
| struct cx18_ddr { /* DDR config data */ |
| u32 chip_config; |
| u32 refresh; |
| u32 timing1; |
| u32 timing2; |
| u32 tune_lane; |
| u32 initial_emrs; |
| }; |
| |
| /* for card information/parameters */ |
| struct cx18_card { |
| int type; |
| char *name; |
| char *comment; |
| u32 v4l2_capabilities; |
| u32 hw_audio_ctrl; /* hardware used for the V4L2 controls (only |
| 1 dev allowed currently) */ |
| u32 hw_muxer; /* hardware used to multiplex audio input */ |
| u32 hw_all; /* all hardware used by the board */ |
| struct cx18_card_video_input video_inputs[CX18_CARD_MAX_VIDEO_INPUTS]; |
| struct cx18_card_audio_input audio_inputs[CX18_CARD_MAX_AUDIO_INPUTS]; |
| struct cx18_card_audio_input radio_input; |
| |
| /* GPIO card-specific settings */ |
| u8 xceive_pin; /* XCeive tuner GPIO reset pin */ |
| struct cx18_gpio_init gpio_init; |
| struct cx18_gpio_i2c_slave_reset gpio_i2c_slave_reset; |
| struct cx18_gpio_audio_input gpio_audio_input; |
| |
| struct cx18_card_tuner tuners[CX18_CARD_MAX_TUNERS]; |
| struct cx18_card_tuner_i2c *i2c; |
| |
| struct cx18_ddr ddr; |
| |
| /* list of device and subsystem vendor/devices that |
| correspond to this card type. */ |
| const struct cx18_card_pci_info *pci_list; |
| }; |
| |
| int cx18_get_input(struct cx18 *cx, u16 index, struct v4l2_input *input); |
| int cx18_get_audio_input(struct cx18 *cx, u16 index, struct v4l2_audio *input); |
| const struct cx18_card *cx18_get_card(u16 index); |