| /* |
| * linux/drivers/video/omap2/dss/dsi.c |
| * |
| * Copyright (C) 2009 Nokia Corporation |
| * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published by |
| * the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program. If not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #define DSS_SUBSYS_NAME "DSI" |
| |
| #include <linux/kernel.h> |
| #include <linux/io.h> |
| #include <linux/clk.h> |
| #include <linux/device.h> |
| #include <linux/err.h> |
| #include <linux/interrupt.h> |
| #include <linux/delay.h> |
| #include <linux/mutex.h> |
| #include <linux/semaphore.h> |
| #include <linux/seq_file.h> |
| #include <linux/platform_device.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/wait.h> |
| #include <linux/workqueue.h> |
| |
| #include <plat/display.h> |
| #include <plat/clock.h> |
| |
| #include "dss.h" |
| |
| /*#define VERBOSE_IRQ*/ |
| #define DSI_CATCH_MISSING_TE |
| |
| #define DSI_BASE 0x4804FC00 |
| |
| struct dsi_reg { u16 idx; }; |
| |
| #define DSI_REG(idx) ((const struct dsi_reg) { idx }) |
| |
| #define DSI_SZ_REGS SZ_1K |
| /* DSI Protocol Engine */ |
| |
| #define DSI_REVISION DSI_REG(0x0000) |
| #define DSI_SYSCONFIG DSI_REG(0x0010) |
| #define DSI_SYSSTATUS DSI_REG(0x0014) |
| #define DSI_IRQSTATUS DSI_REG(0x0018) |
| #define DSI_IRQENABLE DSI_REG(0x001C) |
| #define DSI_CTRL DSI_REG(0x0040) |
| #define DSI_COMPLEXIO_CFG1 DSI_REG(0x0048) |
| #define DSI_COMPLEXIO_IRQ_STATUS DSI_REG(0x004C) |
| #define DSI_COMPLEXIO_IRQ_ENABLE DSI_REG(0x0050) |
| #define DSI_CLK_CTRL DSI_REG(0x0054) |
| #define DSI_TIMING1 DSI_REG(0x0058) |
| #define DSI_TIMING2 DSI_REG(0x005C) |
| #define DSI_VM_TIMING1 DSI_REG(0x0060) |
| #define DSI_VM_TIMING2 DSI_REG(0x0064) |
| #define DSI_VM_TIMING3 DSI_REG(0x0068) |
| #define DSI_CLK_TIMING DSI_REG(0x006C) |
| #define DSI_TX_FIFO_VC_SIZE DSI_REG(0x0070) |
| #define DSI_RX_FIFO_VC_SIZE DSI_REG(0x0074) |
| #define DSI_COMPLEXIO_CFG2 DSI_REG(0x0078) |
| #define DSI_RX_FIFO_VC_FULLNESS DSI_REG(0x007C) |
| #define DSI_VM_TIMING4 DSI_REG(0x0080) |
| #define DSI_TX_FIFO_VC_EMPTINESS DSI_REG(0x0084) |
| #define DSI_VM_TIMING5 DSI_REG(0x0088) |
| #define DSI_VM_TIMING6 DSI_REG(0x008C) |
| #define DSI_VM_TIMING7 DSI_REG(0x0090) |
| #define DSI_STOPCLK_TIMING DSI_REG(0x0094) |
| #define DSI_VC_CTRL(n) DSI_REG(0x0100 + (n * 0x20)) |
| #define DSI_VC_TE(n) DSI_REG(0x0104 + (n * 0x20)) |
| #define DSI_VC_LONG_PACKET_HEADER(n) DSI_REG(0x0108 + (n * 0x20)) |
| #define DSI_VC_LONG_PACKET_PAYLOAD(n) DSI_REG(0x010C + (n * 0x20)) |
| #define DSI_VC_SHORT_PACKET_HEADER(n) DSI_REG(0x0110 + (n * 0x20)) |
| #define DSI_VC_IRQSTATUS(n) DSI_REG(0x0118 + (n * 0x20)) |
| #define DSI_VC_IRQENABLE(n) DSI_REG(0x011C + (n * 0x20)) |
| |
| /* DSIPHY_SCP */ |
| |
| #define DSI_DSIPHY_CFG0 DSI_REG(0x200 + 0x0000) |
| #define DSI_DSIPHY_CFG1 DSI_REG(0x200 + 0x0004) |
| #define DSI_DSIPHY_CFG2 DSI_REG(0x200 + 0x0008) |
| #define DSI_DSIPHY_CFG5 DSI_REG(0x200 + 0x0014) |
| |
| /* DSI_PLL_CTRL_SCP */ |
| |
| #define DSI_PLL_CONTROL DSI_REG(0x300 + 0x0000) |
| #define DSI_PLL_STATUS DSI_REG(0x300 + 0x0004) |
| #define DSI_PLL_GO DSI_REG(0x300 + 0x0008) |
| #define DSI_PLL_CONFIGURATION1 DSI_REG(0x300 + 0x000C) |
| #define DSI_PLL_CONFIGURATION2 DSI_REG(0x300 + 0x0010) |
| |
| #define REG_GET(idx, start, end) \ |
| FLD_GET(dsi_read_reg(idx), start, end) |
| |
| #define REG_FLD_MOD(idx, val, start, end) \ |
| dsi_write_reg(idx, FLD_MOD(dsi_read_reg(idx), val, start, end)) |
| |
| /* Global interrupts */ |
| #define DSI_IRQ_VC0 (1 << 0) |
| #define DSI_IRQ_VC1 (1 << 1) |
| #define DSI_IRQ_VC2 (1 << 2) |
| #define DSI_IRQ_VC3 (1 << 3) |
| #define DSI_IRQ_WAKEUP (1 << 4) |
| #define DSI_IRQ_RESYNC (1 << 5) |
| #define DSI_IRQ_PLL_LOCK (1 << 7) |
| #define DSI_IRQ_PLL_UNLOCK (1 << 8) |
| #define DSI_IRQ_PLL_RECALL (1 << 9) |
| #define DSI_IRQ_COMPLEXIO_ERR (1 << 10) |
| #define DSI_IRQ_HS_TX_TIMEOUT (1 << 14) |
| #define DSI_IRQ_LP_RX_TIMEOUT (1 << 15) |
| #define DSI_IRQ_TE_TRIGGER (1 << 16) |
| #define DSI_IRQ_ACK_TRIGGER (1 << 17) |
| #define DSI_IRQ_SYNC_LOST (1 << 18) |
| #define DSI_IRQ_LDO_POWER_GOOD (1 << 19) |
| #define DSI_IRQ_TA_TIMEOUT (1 << 20) |
| #define DSI_IRQ_ERROR_MASK \ |
| (DSI_IRQ_HS_TX_TIMEOUT | DSI_IRQ_LP_RX_TIMEOUT | DSI_IRQ_SYNC_LOST | \ |
| DSI_IRQ_TA_TIMEOUT) |
| #define DSI_IRQ_CHANNEL_MASK 0xf |
| |
| /* Virtual channel interrupts */ |
| #define DSI_VC_IRQ_CS (1 << 0) |
| #define DSI_VC_IRQ_ECC_CORR (1 << 1) |
| #define DSI_VC_IRQ_PACKET_SENT (1 << 2) |
| #define DSI_VC_IRQ_FIFO_TX_OVF (1 << 3) |
| #define DSI_VC_IRQ_FIFO_RX_OVF (1 << 4) |
| #define DSI_VC_IRQ_BTA (1 << 5) |
| #define DSI_VC_IRQ_ECC_NO_CORR (1 << 6) |
| #define DSI_VC_IRQ_FIFO_TX_UDF (1 << 7) |
| #define DSI_VC_IRQ_PP_BUSY_CHANGE (1 << 8) |
| #define DSI_VC_IRQ_ERROR_MASK \ |
| (DSI_VC_IRQ_CS | DSI_VC_IRQ_ECC_CORR | DSI_VC_IRQ_FIFO_TX_OVF | \ |
| DSI_VC_IRQ_FIFO_RX_OVF | DSI_VC_IRQ_ECC_NO_CORR | \ |
| DSI_VC_IRQ_FIFO_TX_UDF) |
| |
| /* ComplexIO interrupts */ |
| #define DSI_CIO_IRQ_ERRSYNCESC1 (1 << 0) |
| #define DSI_CIO_IRQ_ERRSYNCESC2 (1 << 1) |
| #define DSI_CIO_IRQ_ERRSYNCESC3 (1 << 2) |
| #define DSI_CIO_IRQ_ERRESC1 (1 << 5) |
| #define DSI_CIO_IRQ_ERRESC2 (1 << 6) |
| #define DSI_CIO_IRQ_ERRESC3 (1 << 7) |
| #define DSI_CIO_IRQ_ERRCONTROL1 (1 << 10) |
| #define DSI_CIO_IRQ_ERRCONTROL2 (1 << 11) |
| #define DSI_CIO_IRQ_ERRCONTROL3 (1 << 12) |
| #define DSI_CIO_IRQ_STATEULPS1 (1 << 15) |
| #define DSI_CIO_IRQ_STATEULPS2 (1 << 16) |
| #define DSI_CIO_IRQ_STATEULPS3 (1 << 17) |
| #define DSI_CIO_IRQ_ERRCONTENTIONLP0_1 (1 << 20) |
| #define DSI_CIO_IRQ_ERRCONTENTIONLP1_1 (1 << 21) |
| #define DSI_CIO_IRQ_ERRCONTENTIONLP0_2 (1 << 22) |
| #define DSI_CIO_IRQ_ERRCONTENTIONLP1_2 (1 << 23) |
| #define DSI_CIO_IRQ_ERRCONTENTIONLP0_3 (1 << 24) |
| #define DSI_CIO_IRQ_ERRCONTENTIONLP1_3 (1 << 25) |
| #define DSI_CIO_IRQ_ULPSACTIVENOT_ALL0 (1 << 30) |
| #define DSI_CIO_IRQ_ULPSACTIVENOT_ALL1 (1 << 31) |
| |
| #define DSI_DT_DCS_SHORT_WRITE_0 0x05 |
| #define DSI_DT_DCS_SHORT_WRITE_1 0x15 |
| #define DSI_DT_DCS_READ 0x06 |
| #define DSI_DT_SET_MAX_RET_PKG_SIZE 0x37 |
| #define DSI_DT_NULL_PACKET 0x09 |
| #define DSI_DT_DCS_LONG_WRITE 0x39 |
| |
| #define DSI_DT_RX_ACK_WITH_ERR 0x02 |
| #define DSI_DT_RX_DCS_LONG_READ 0x1c |
| #define DSI_DT_RX_SHORT_READ_1 0x21 |
| #define DSI_DT_RX_SHORT_READ_2 0x22 |
| |
| #define FINT_MAX 2100000 |
| #define FINT_MIN 750000 |
| #define REGN_MAX (1 << 7) |
| #define REGM_MAX ((1 << 11) - 1) |
| #define REGM3_MAX (1 << 4) |
| #define REGM4_MAX (1 << 4) |
| #define LP_DIV_MAX ((1 << 13) - 1) |
| |
| enum fifo_size { |
| DSI_FIFO_SIZE_0 = 0, |
| DSI_FIFO_SIZE_32 = 1, |
| DSI_FIFO_SIZE_64 = 2, |
| DSI_FIFO_SIZE_96 = 3, |
| DSI_FIFO_SIZE_128 = 4, |
| }; |
| |
| enum dsi_vc_mode { |
| DSI_VC_MODE_L4 = 0, |
| DSI_VC_MODE_VP, |
| }; |
| |
| struct dsi_update_region { |
| u16 x, y, w, h; |
| struct omap_dss_device *device; |
| }; |
| |
| struct dsi_irq_stats { |
| unsigned long last_reset; |
| unsigned irq_count; |
| unsigned dsi_irqs[32]; |
| unsigned vc_irqs[4][32]; |
| unsigned cio_irqs[32]; |
| }; |
| |
| static struct |
| { |
| void __iomem *base; |
| |
| struct dsi_clock_info current_cinfo; |
| |
| struct regulator *vdds_dsi_reg; |
| |
| struct { |
| enum dsi_vc_mode mode; |
| struct omap_dss_device *dssdev; |
| enum fifo_size fifo_size; |
| } vc[4]; |
| |
| struct mutex lock; |
| struct semaphore bus_lock; |
| |
| unsigned pll_locked; |
| |
| struct completion bta_completion; |
| |
| int update_channel; |
| struct dsi_update_region update_region; |
| |
| bool te_enabled; |
| |
| struct work_struct framedone_work; |
| void (*framedone_callback)(int, void *); |
| void *framedone_data; |
| |
| struct delayed_work framedone_timeout_work; |
| |
| #ifdef DSI_CATCH_MISSING_TE |
| struct timer_list te_timer; |
| #endif |
| |
| unsigned long cache_req_pck; |
| unsigned long cache_clk_freq; |
| struct dsi_clock_info cache_cinfo; |
| |
| u32 errors; |
| spinlock_t errors_lock; |
| #ifdef DEBUG |
| ktime_t perf_setup_time; |
| ktime_t perf_start_time; |
| #endif |
| int debug_read; |
| int debug_write; |
| |
| #ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS |
| spinlock_t irq_stats_lock; |
| struct dsi_irq_stats irq_stats; |
| #endif |
| } dsi; |
| |
| #ifdef DEBUG |
| static unsigned int dsi_perf; |
| module_param_named(dsi_perf, dsi_perf, bool, 0644); |
| #endif |
| |
| static inline void dsi_write_reg(const struct dsi_reg idx, u32 val) |
| { |
| __raw_writel(val, dsi.base + idx.idx); |
| } |
| |
| static inline u32 dsi_read_reg(const struct dsi_reg idx) |
| { |
| return __raw_readl(dsi.base + idx.idx); |
| } |
| |
| |
| void dsi_save_context(void) |
| { |
| } |
| |
| void dsi_restore_context(void) |
| { |
| } |
| |
| void dsi_bus_lock(void) |
| { |
| down(&dsi.bus_lock); |
| } |
| EXPORT_SYMBOL(dsi_bus_lock); |
| |
| void dsi_bus_unlock(void) |
| { |
| up(&dsi.bus_lock); |
| } |
| EXPORT_SYMBOL(dsi_bus_unlock); |
| |
| static bool dsi_bus_is_locked(void) |
| { |
| return dsi.bus_lock.count == 0; |
| } |
| |
| static inline int wait_for_bit_change(const struct dsi_reg idx, int bitnum, |
| int value) |
| { |
| int t = 100000; |
| |
| while (REG_GET(idx, bitnum, bitnum) != value) { |
| if (--t == 0) |
| return !value; |
| } |
| |
| return value; |
| } |
| |
| #ifdef DEBUG |
| static void dsi_perf_mark_setup(void) |
| { |
| dsi.perf_setup_time = ktime_get(); |
| } |
| |
| static void dsi_perf_mark_start(void) |
| { |
| dsi.perf_start_time = ktime_get(); |
| } |
| |
| static void dsi_perf_show(const char *name) |
| { |
| ktime_t t, setup_time, trans_time; |
| u32 total_bytes; |
| u32 setup_us, trans_us, total_us; |
| |
| if (!dsi_perf) |
| return; |
| |
| t = ktime_get(); |
| |
| setup_time = ktime_sub(dsi.perf_start_time, dsi.perf_setup_time); |
| setup_us = (u32)ktime_to_us(setup_time); |
| if (setup_us == 0) |
| setup_us = 1; |
| |
| trans_time = ktime_sub(t, dsi.perf_start_time); |
| trans_us = (u32)ktime_to_us(trans_time); |
| if (trans_us == 0) |
| trans_us = 1; |
| |
| total_us = setup_us + trans_us; |
| |
| total_bytes = dsi.update_region.w * |
| dsi.update_region.h * |
| dsi.update_region.device->ctrl.pixel_size / 8; |
| |
| printk(KERN_INFO "DSI(%s): %u us + %u us = %u us (%uHz), " |
| "%u bytes, %u kbytes/sec\n", |
| name, |
| setup_us, |
| trans_us, |
| total_us, |
| 1000*1000 / total_us, |
| total_bytes, |
| total_bytes * 1000 / total_us); |
| } |
| #else |
| #define dsi_perf_mark_setup() |
| #define dsi_perf_mark_start() |
| #define dsi_perf_show(x) |
| #endif |
| |
| static void print_irq_status(u32 status) |
| { |
| #ifndef VERBOSE_IRQ |
| if ((status & ~DSI_IRQ_CHANNEL_MASK) == 0) |
| return; |
| #endif |
| printk(KERN_DEBUG "DSI IRQ: 0x%x: ", status); |
| |
| #define PIS(x) \ |
| if (status & DSI_IRQ_##x) \ |
| printk(#x " "); |
| #ifdef VERBOSE_IRQ |
| PIS(VC0); |
| PIS(VC1); |
| PIS(VC2); |
| PIS(VC3); |
| #endif |
| PIS(WAKEUP); |
| PIS(RESYNC); |
| PIS(PLL_LOCK); |
| PIS(PLL_UNLOCK); |
| PIS(PLL_RECALL); |
| PIS(COMPLEXIO_ERR); |
| PIS(HS_TX_TIMEOUT); |
| PIS(LP_RX_TIMEOUT); |
| PIS(TE_TRIGGER); |
| PIS(ACK_TRIGGER); |
| PIS(SYNC_LOST); |
| PIS(LDO_POWER_GOOD); |
| PIS(TA_TIMEOUT); |
| #undef PIS |
| |
| printk("\n"); |
| } |
| |
| static void print_irq_status_vc(int channel, u32 status) |
| { |
| #ifndef VERBOSE_IRQ |
| if ((status & ~DSI_VC_IRQ_PACKET_SENT) == 0) |
| return; |
| #endif |
| printk(KERN_DEBUG "DSI VC(%d) IRQ 0x%x: ", channel, status); |
| |
| #define PIS(x) \ |
| if (status & DSI_VC_IRQ_##x) \ |
| printk(#x " "); |
| PIS(CS); |
| PIS(ECC_CORR); |
| #ifdef VERBOSE_IRQ |
| PIS(PACKET_SENT); |
| #endif |
| PIS(FIFO_TX_OVF); |
| PIS(FIFO_RX_OVF); |
| PIS(BTA); |
| PIS(ECC_NO_CORR); |
| PIS(FIFO_TX_UDF); |
| PIS(PP_BUSY_CHANGE); |
| #undef PIS |
| printk("\n"); |
| } |
| |
| static void print_irq_status_cio(u32 status) |
| { |
| printk(KERN_DEBUG "DSI CIO IRQ 0x%x: ", status); |
| |
| #define PIS(x) \ |
| if (status & DSI_CIO_IRQ_##x) \ |
| printk(#x " "); |
| PIS(ERRSYNCESC1); |
| PIS(ERRSYNCESC2); |
| PIS(ERRSYNCESC3); |
| PIS(ERRESC1); |
| PIS(ERRESC2); |
| PIS(ERRESC3); |
| PIS(ERRCONTROL1); |
| PIS(ERRCONTROL2); |
| PIS(ERRCONTROL3); |
| PIS(STATEULPS1); |
| PIS(STATEULPS2); |
| PIS(STATEULPS3); |
| PIS(ERRCONTENTIONLP0_1); |
| PIS(ERRCONTENTIONLP1_1); |
| PIS(ERRCONTENTIONLP0_2); |
| PIS(ERRCONTENTIONLP1_2); |
| PIS(ERRCONTENTIONLP0_3); |
| PIS(ERRCONTENTIONLP1_3); |
| PIS(ULPSACTIVENOT_ALL0); |
| PIS(ULPSACTIVENOT_ALL1); |
| #undef PIS |
| |
| printk("\n"); |
| } |
| |
| static int debug_irq; |
| |
| /* called from dss */ |
| void dsi_irq_handler(void) |
| { |
| u32 irqstatus, vcstatus, ciostatus; |
| int i; |
| |
| irqstatus = dsi_read_reg(DSI_IRQSTATUS); |
| |
| #ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS |
| spin_lock(&dsi.irq_stats_lock); |
| dsi.irq_stats.irq_count++; |
| dss_collect_irq_stats(irqstatus, dsi.irq_stats.dsi_irqs); |
| #endif |
| |
| if (irqstatus & DSI_IRQ_ERROR_MASK) { |
| DSSERR("DSI error, irqstatus %x\n", irqstatus); |
| print_irq_status(irqstatus); |
| spin_lock(&dsi.errors_lock); |
| dsi.errors |= irqstatus & DSI_IRQ_ERROR_MASK; |
| spin_unlock(&dsi.errors_lock); |
| } else if (debug_irq) { |
| print_irq_status(irqstatus); |
| } |
| |
| #ifdef DSI_CATCH_MISSING_TE |
| if (irqstatus & DSI_IRQ_TE_TRIGGER) |
| del_timer(&dsi.te_timer); |
| #endif |
| |
| for (i = 0; i < 4; ++i) { |
| if ((irqstatus & (1<<i)) == 0) |
| continue; |
| |
| vcstatus = dsi_read_reg(DSI_VC_IRQSTATUS(i)); |
| |
| #ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS |
| dss_collect_irq_stats(vcstatus, dsi.irq_stats.vc_irqs[i]); |
| #endif |
| |
| if (vcstatus & DSI_VC_IRQ_BTA) |
| complete(&dsi.bta_completion); |
| |
| if (vcstatus & DSI_VC_IRQ_ERROR_MASK) { |
| DSSERR("DSI VC(%d) error, vc irqstatus %x\n", |
| i, vcstatus); |
| print_irq_status_vc(i, vcstatus); |
| } else if (debug_irq) { |
| print_irq_status_vc(i, vcstatus); |
| } |
| |
| dsi_write_reg(DSI_VC_IRQSTATUS(i), vcstatus); |
| /* flush posted write */ |
| dsi_read_reg(DSI_VC_IRQSTATUS(i)); |
| } |
| |
| if (irqstatus & DSI_IRQ_COMPLEXIO_ERR) { |
| ciostatus = dsi_read_reg(DSI_COMPLEXIO_IRQ_STATUS); |
| |
| #ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS |
| dss_collect_irq_stats(ciostatus, dsi.irq_stats.cio_irqs); |
| #endif |
| |
| dsi_write_reg(DSI_COMPLEXIO_IRQ_STATUS, ciostatus); |
| /* flush posted write */ |
| dsi_read_reg(DSI_COMPLEXIO_IRQ_STATUS); |
| |
| DSSERR("DSI CIO error, cio irqstatus %x\n", ciostatus); |
| print_irq_status_cio(ciostatus); |
| } |
| |
| dsi_write_reg(DSI_IRQSTATUS, irqstatus & ~DSI_IRQ_CHANNEL_MASK); |
| /* flush posted write */ |
| dsi_read_reg(DSI_IRQSTATUS); |
| |
| #ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS |
| spin_unlock(&dsi.irq_stats_lock); |
| #endif |
| } |
| |
| |
| static void _dsi_initialize_irq(void) |
| { |
| u32 l; |
| int i; |
| |
| /* disable all interrupts */ |
| dsi_write_reg(DSI_IRQENABLE, 0); |
| for (i = 0; i < 4; ++i) |
| dsi_write_reg(DSI_VC_IRQENABLE(i), 0); |
| dsi_write_reg(DSI_COMPLEXIO_IRQ_ENABLE, 0); |
| |
| /* clear interrupt status */ |
| l = dsi_read_reg(DSI_IRQSTATUS); |
| dsi_write_reg(DSI_IRQSTATUS, l & ~DSI_IRQ_CHANNEL_MASK); |
| |
| for (i = 0; i < 4; ++i) { |
| l = dsi_read_reg(DSI_VC_IRQSTATUS(i)); |
| dsi_write_reg(DSI_VC_IRQSTATUS(i), l); |
| } |
| |
| l = dsi_read_reg(DSI_COMPLEXIO_IRQ_STATUS); |
| dsi_write_reg(DSI_COMPLEXIO_IRQ_STATUS, l); |
| |
| /* enable error irqs */ |
| l = DSI_IRQ_ERROR_MASK; |
| #ifdef DSI_CATCH_MISSING_TE |
| l |= DSI_IRQ_TE_TRIGGER; |
| #endif |
| dsi_write_reg(DSI_IRQENABLE, l); |
| |
| l = DSI_VC_IRQ_ERROR_MASK; |
| for (i = 0; i < 4; ++i) |
| dsi_write_reg(DSI_VC_IRQENABLE(i), l); |
| |
| /* XXX zonda responds incorrectly, causing control error: |
| Exit from LP-ESC mode to LP11 uses wrong transition states on the |
| data lines LP0 and LN0. */ |
| dsi_write_reg(DSI_COMPLEXIO_IRQ_ENABLE, |
| -1 & (~DSI_CIO_IRQ_ERRCONTROL2)); |
| } |
| |
| static u32 dsi_get_errors(void) |
| { |
| unsigned long flags; |
| u32 e; |
| spin_lock_irqsave(&dsi.errors_lock, flags); |
| e = dsi.errors; |
| dsi.errors = 0; |
| spin_unlock_irqrestore(&dsi.errors_lock, flags); |
| return e; |
| } |
| |
| static void dsi_vc_enable_bta_irq(int channel) |
| { |
| u32 l; |
| |
| dsi_write_reg(DSI_VC_IRQSTATUS(channel), DSI_VC_IRQ_BTA); |
| |
| l = dsi_read_reg(DSI_VC_IRQENABLE(channel)); |
| l |= DSI_VC_IRQ_BTA; |
| dsi_write_reg(DSI_VC_IRQENABLE(channel), l); |
| } |
| |
| static void dsi_vc_disable_bta_irq(int channel) |
| { |
| u32 l; |
| |
| l = dsi_read_reg(DSI_VC_IRQENABLE(channel)); |
| l &= ~DSI_VC_IRQ_BTA; |
| dsi_write_reg(DSI_VC_IRQENABLE(channel), l); |
| } |
| |
| /* DSI func clock. this could also be DSI2_PLL_FCLK */ |
| static inline void enable_clocks(bool enable) |
| { |
| if (enable) |
| dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); |
| else |
| dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); |
| } |
| |
| /* source clock for DSI PLL. this could also be PCLKFREE */ |
| static inline void dsi_enable_pll_clock(bool enable) |
| { |
| if (enable) |
| dss_clk_enable(DSS_CLK_FCK2); |
| else |
| dss_clk_disable(DSS_CLK_FCK2); |
| |
| if (enable && dsi.pll_locked) { |
| if (wait_for_bit_change(DSI_PLL_STATUS, 1, 1) != 1) |
| DSSERR("cannot lock PLL when enabling clocks\n"); |
| } |
| } |
| |
| #ifdef DEBUG |
| static void _dsi_print_reset_status(void) |
| { |
| u32 l; |
| |
| if (!dss_debug) |
| return; |
| |
| /* A dummy read using the SCP interface to any DSIPHY register is |
| * required after DSIPHY reset to complete the reset of the DSI complex |
| * I/O. */ |
| l = dsi_read_reg(DSI_DSIPHY_CFG5); |
| |
| printk(KERN_DEBUG "DSI resets: "); |
| |
| l = dsi_read_reg(DSI_PLL_STATUS); |
| printk("PLL (%d) ", FLD_GET(l, 0, 0)); |
| |
| l = dsi_read_reg(DSI_COMPLEXIO_CFG1); |
| printk("CIO (%d) ", FLD_GET(l, 29, 29)); |
| |
| l = dsi_read_reg(DSI_DSIPHY_CFG5); |
| printk("PHY (%x, %d, %d, %d)\n", |
| FLD_GET(l, 28, 26), |
| FLD_GET(l, 29, 29), |
| FLD_GET(l, 30, 30), |
| FLD_GET(l, 31, 31)); |
| } |
| #else |
| #define _dsi_print_reset_status() |
| #endif |
| |
| static inline int dsi_if_enable(bool enable) |
| { |
| DSSDBG("dsi_if_enable(%d)\n", enable); |
| |
| enable = enable ? 1 : 0; |
| REG_FLD_MOD(DSI_CTRL, enable, 0, 0); /* IF_EN */ |
| |
| if (wait_for_bit_change(DSI_CTRL, 0, enable) != enable) { |
| DSSERR("Failed to set dsi_if_enable to %d\n", enable); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| unsigned long dsi_get_dsi1_pll_rate(void) |
| { |
| return dsi.current_cinfo.dsi1_pll_fclk; |
| } |
| |
| static unsigned long dsi_get_dsi2_pll_rate(void) |
| { |
| return dsi.current_cinfo.dsi2_pll_fclk; |
| } |
| |
| static unsigned long dsi_get_txbyteclkhs(void) |
| { |
| return dsi.current_cinfo.clkin4ddr / 16; |
| } |
| |
| static unsigned long dsi_fclk_rate(void) |
| { |
| unsigned long r; |
| |
| if (dss_get_dsi_clk_source() == DSS_SRC_DSS1_ALWON_FCLK) { |
| /* DSI FCLK source is DSS1_ALWON_FCK, which is dss1_fck */ |
| r = dss_clk_get_rate(DSS_CLK_FCK1); |
| } else { |
| /* DSI FCLK source is DSI2_PLL_FCLK */ |
| r = dsi_get_dsi2_pll_rate(); |
| } |
| |
| return r; |
| } |
| |
| static int dsi_set_lp_clk_divisor(struct omap_dss_device *dssdev) |
| { |
| unsigned long dsi_fclk; |
| unsigned lp_clk_div; |
| unsigned long lp_clk; |
| |
| lp_clk_div = dssdev->phy.dsi.div.lp_clk_div; |
| |
| if (lp_clk_div == 0 || lp_clk_div > LP_DIV_MAX) |
| return -EINVAL; |
| |
| dsi_fclk = dsi_fclk_rate(); |
| |
| lp_clk = dsi_fclk / 2 / lp_clk_div; |
| |
| DSSDBG("LP_CLK_DIV %u, LP_CLK %lu\n", lp_clk_div, lp_clk); |
| dsi.current_cinfo.lp_clk = lp_clk; |
| dsi.current_cinfo.lp_clk_div = lp_clk_div; |
| |
| REG_FLD_MOD(DSI_CLK_CTRL, lp_clk_div, 12, 0); /* LP_CLK_DIVISOR */ |
| |
| REG_FLD_MOD(DSI_CLK_CTRL, dsi_fclk > 30000000 ? 1 : 0, |
| 21, 21); /* LP_RX_SYNCHRO_ENABLE */ |
| |
| return 0; |
| } |
| |
| |
| enum dsi_pll_power_state { |
| DSI_PLL_POWER_OFF = 0x0, |
| DSI_PLL_POWER_ON_HSCLK = 0x1, |
| DSI_PLL_POWER_ON_ALL = 0x2, |
| DSI_PLL_POWER_ON_DIV = 0x3, |
| }; |
| |
| static int dsi_pll_power(enum dsi_pll_power_state state) |
| { |
| int t = 0; |
| |
| REG_FLD_MOD(DSI_CLK_CTRL, state, 31, 30); /* PLL_PWR_CMD */ |
| |
| /* PLL_PWR_STATUS */ |
| while (FLD_GET(dsi_read_reg(DSI_CLK_CTRL), 29, 28) != state) { |
| if (++t > 1000) { |
| DSSERR("Failed to set DSI PLL power mode to %d\n", |
| state); |
| return -ENODEV; |
| } |
| udelay(1); |
| } |
| |
| return 0; |
| } |
| |
| /* calculate clock rates using dividers in cinfo */ |
| static int dsi_calc_clock_rates(struct dsi_clock_info *cinfo) |
| { |
| if (cinfo->regn == 0 || cinfo->regn > REGN_MAX) |
| return -EINVAL; |
| |
| if (cinfo->regm == 0 || cinfo->regm > REGM_MAX) |
| return -EINVAL; |
| |
| if (cinfo->regm3 > REGM3_MAX) |
| return -EINVAL; |
| |
| if (cinfo->regm4 > REGM4_MAX) |
| return -EINVAL; |
| |
| if (cinfo->use_dss2_fck) { |
| cinfo->clkin = dss_clk_get_rate(DSS_CLK_FCK2); |
| /* XXX it is unclear if highfreq should be used |
| * with DSS2_FCK source also */ |
| cinfo->highfreq = 0; |
| } else { |
| cinfo->clkin = dispc_pclk_rate(); |
| |
| if (cinfo->clkin < 32000000) |
| cinfo->highfreq = 0; |
| else |
| cinfo->highfreq = 1; |
| } |
| |
| cinfo->fint = cinfo->clkin / (cinfo->regn * (cinfo->highfreq ? 2 : 1)); |
| |
| if (cinfo->fint > FINT_MAX || cinfo->fint < FINT_MIN) |
| return -EINVAL; |
| |
| cinfo->clkin4ddr = 2 * cinfo->regm * cinfo->fint; |
| |
| if (cinfo->clkin4ddr > 1800 * 1000 * 1000) |
| return -EINVAL; |
| |
| if (cinfo->regm3 > 0) |
| cinfo->dsi1_pll_fclk = cinfo->clkin4ddr / cinfo->regm3; |
| else |
| cinfo->dsi1_pll_fclk = 0; |
| |
| if (cinfo->regm4 > 0) |
| cinfo->dsi2_pll_fclk = cinfo->clkin4ddr / cinfo->regm4; |
| else |
| cinfo->dsi2_pll_fclk = 0; |
| |
| return 0; |
| } |
| |
| int dsi_pll_calc_clock_div_pck(bool is_tft, unsigned long req_pck, |
| struct dsi_clock_info *dsi_cinfo, |
| struct dispc_clock_info *dispc_cinfo) |
| { |
| struct dsi_clock_info cur, best; |
| struct dispc_clock_info best_dispc; |
| int min_fck_per_pck; |
| int match = 0; |
| unsigned long dss_clk_fck2; |
| |
| dss_clk_fck2 = dss_clk_get_rate(DSS_CLK_FCK2); |
| |
| if (req_pck == dsi.cache_req_pck && |
| dsi.cache_cinfo.clkin == dss_clk_fck2) { |
| DSSDBG("DSI clock info found from cache\n"); |
| *dsi_cinfo = dsi.cache_cinfo; |
| dispc_find_clk_divs(is_tft, req_pck, dsi_cinfo->dsi1_pll_fclk, |
| dispc_cinfo); |
| return 0; |
| } |
| |
| min_fck_per_pck = CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK; |
| |
| if (min_fck_per_pck && |
| req_pck * min_fck_per_pck > DISPC_MAX_FCK) { |
| DSSERR("Requested pixel clock not possible with the current " |
| "OMAP2_DSS_MIN_FCK_PER_PCK setting. Turning " |
| "the constraint off.\n"); |
| min_fck_per_pck = 0; |
| } |
| |
| DSSDBG("dsi_pll_calc\n"); |
| |
| retry: |
| memset(&best, 0, sizeof(best)); |
| memset(&best_dispc, 0, sizeof(best_dispc)); |
| |
| memset(&cur, 0, sizeof(cur)); |
| cur.clkin = dss_clk_fck2; |
| cur.use_dss2_fck = 1; |
| cur.highfreq = 0; |
| |
| /* no highfreq: 0.75MHz < Fint = clkin / regn < 2.1MHz */ |
| /* highfreq: 0.75MHz < Fint = clkin / (2*regn) < 2.1MHz */ |
| /* To reduce PLL lock time, keep Fint high (around 2 MHz) */ |
| for (cur.regn = 1; cur.regn < REGN_MAX; ++cur.regn) { |
| if (cur.highfreq == 0) |
| cur.fint = cur.clkin / cur.regn; |
| else |
| cur.fint = cur.clkin / (2 * cur.regn); |
| |
| if (cur.fint > FINT_MAX || cur.fint < FINT_MIN) |
| continue; |
| |
| /* DSIPHY(MHz) = (2 * regm / regn) * (clkin / (highfreq + 1)) */ |
| for (cur.regm = 1; cur.regm < REGM_MAX; ++cur.regm) { |
| unsigned long a, b; |
| |
| a = 2 * cur.regm * (cur.clkin/1000); |
| b = cur.regn * (cur.highfreq + 1); |
| cur.clkin4ddr = a / b * 1000; |
| |
| if (cur.clkin4ddr > 1800 * 1000 * 1000) |
| break; |
| |
| /* DSI1_PLL_FCLK(MHz) = DSIPHY(MHz) / regm3 < 173MHz */ |
| for (cur.regm3 = 1; cur.regm3 < REGM3_MAX; |
| ++cur.regm3) { |
| struct dispc_clock_info cur_dispc; |
| cur.dsi1_pll_fclk = cur.clkin4ddr / cur.regm3; |
| |
| /* this will narrow down the search a bit, |
| * but still give pixclocks below what was |
| * requested */ |
| if (cur.dsi1_pll_fclk < req_pck) |
| break; |
| |
| if (cur.dsi1_pll_fclk > DISPC_MAX_FCK) |
| continue; |
| |
| if (min_fck_per_pck && |
| cur.dsi1_pll_fclk < |
| req_pck * min_fck_per_pck) |
| continue; |
| |
| match = 1; |
| |
| dispc_find_clk_divs(is_tft, req_pck, |
| cur.dsi1_pll_fclk, |
| &cur_dispc); |
| |
| if (abs(cur_dispc.pck - req_pck) < |
| abs(best_dispc.pck - req_pck)) { |
| best = cur; |
| best_dispc = cur_dispc; |
| |
| if (cur_dispc.pck == req_pck) |
| goto found; |
| } |
| } |
| } |
| } |
| found: |
| if (!match) { |
| if (min_fck_per_pck) { |
| DSSERR("Could not find suitable clock settings.\n" |
| "Turning FCK/PCK constraint off and" |
| "trying again.\n"); |
| min_fck_per_pck = 0; |
| goto retry; |
| } |
| |
| DSSERR("Could not find suitable clock settings.\n"); |
| |
| return -EINVAL; |
| } |
| |
| /* DSI2_PLL_FCLK (regm4) is not used */ |
| best.regm4 = 0; |
| best.dsi2_pll_fclk = 0; |
| |
| if (dsi_cinfo) |
| *dsi_cinfo = best; |
| if (dispc_cinfo) |
| *dispc_cinfo = best_dispc; |
| |
| dsi.cache_req_pck = req_pck; |
| dsi.cache_clk_freq = 0; |
| dsi.cache_cinfo = best; |
| |
| return 0; |
| } |
| |
| int dsi_pll_set_clock_div(struct dsi_clock_info *cinfo) |
| { |
| int r = 0; |
| u32 l; |
| int f; |
| |
| DSSDBGF(); |
| |
| dsi.current_cinfo.fint = cinfo->fint; |
| dsi.current_cinfo.clkin4ddr = cinfo->clkin4ddr; |
| dsi.current_cinfo.dsi1_pll_fclk = cinfo->dsi1_pll_fclk; |
| dsi.current_cinfo.dsi2_pll_fclk = cinfo->dsi2_pll_fclk; |
| |
| dsi.current_cinfo.regn = cinfo->regn; |
| dsi.current_cinfo.regm = cinfo->regm; |
| dsi.current_cinfo.regm3 = cinfo->regm3; |
| dsi.current_cinfo.regm4 = cinfo->regm4; |
| |
| DSSDBG("DSI Fint %ld\n", cinfo->fint); |
| |
| DSSDBG("clkin (%s) rate %ld, highfreq %d\n", |
| cinfo->use_dss2_fck ? "dss2_fck" : "pclkfree", |
| cinfo->clkin, |
| cinfo->highfreq); |
| |
| /* DSIPHY == CLKIN4DDR */ |
| DSSDBG("CLKIN4DDR = 2 * %d / %d * %lu / %d = %lu\n", |
| cinfo->regm, |
| cinfo->regn, |
| cinfo->clkin, |
| cinfo->highfreq + 1, |
| cinfo->clkin4ddr); |
| |
| DSSDBG("Data rate on 1 DSI lane %ld Mbps\n", |
| cinfo->clkin4ddr / 1000 / 1000 / 2); |
| |
| DSSDBG("Clock lane freq %ld Hz\n", cinfo->clkin4ddr / 4); |
| |
| DSSDBG("regm3 = %d, dsi1_pll_fclk = %lu\n", |
| cinfo->regm3, cinfo->dsi1_pll_fclk); |
| DSSDBG("regm4 = %d, dsi2_pll_fclk = %lu\n", |
| cinfo->regm4, cinfo->dsi2_pll_fclk); |
| |
| REG_FLD_MOD(DSI_PLL_CONTROL, 0, 0, 0); /* DSI_PLL_AUTOMODE = manual */ |
| |
| l = dsi_read_reg(DSI_PLL_CONFIGURATION1); |
| l = FLD_MOD(l, 1, 0, 0); /* DSI_PLL_STOPMODE */ |
| l = FLD_MOD(l, cinfo->regn - 1, 7, 1); /* DSI_PLL_REGN */ |
| l = FLD_MOD(l, cinfo->regm, 18, 8); /* DSI_PLL_REGM */ |
| l = FLD_MOD(l, cinfo->regm3 > 0 ? cinfo->regm3 - 1 : 0, |
| 22, 19); /* DSI_CLOCK_DIV */ |
| l = FLD_MOD(l, cinfo->regm4 > 0 ? cinfo->regm4 - 1 : 0, |
| 26, 23); /* DSIPROTO_CLOCK_DIV */ |
| dsi_write_reg(DSI_PLL_CONFIGURATION1, l); |
| |
| BUG_ON(cinfo->fint < 750000 || cinfo->fint > 2100000); |
| if (cinfo->fint < 1000000) |
| f = 0x3; |
| else if (cinfo->fint < 1250000) |
| f = 0x4; |
| else if (cinfo->fint < 1500000) |
| f = 0x5; |
| else if (cinfo->fint < 1750000) |
| f = 0x6; |
| else |
| f = 0x7; |
| |
| l = dsi_read_reg(DSI_PLL_CONFIGURATION2); |
| l = FLD_MOD(l, f, 4, 1); /* DSI_PLL_FREQSEL */ |
| l = FLD_MOD(l, cinfo->use_dss2_fck ? 0 : 1, |
| 11, 11); /* DSI_PLL_CLKSEL */ |
| l = FLD_MOD(l, cinfo->highfreq, |
| 12, 12); /* DSI_PLL_HIGHFREQ */ |
| l = FLD_MOD(l, 1, 13, 13); /* DSI_PLL_REFEN */ |
| l = FLD_MOD(l, 0, 14, 14); /* DSIPHY_CLKINEN */ |
| l = FLD_MOD(l, 1, 20, 20); /* DSI_HSDIVBYPASS */ |
| dsi_write_reg(DSI_PLL_CONFIGURATION2, l); |
| |
| REG_FLD_MOD(DSI_PLL_GO, 1, 0, 0); /* DSI_PLL_GO */ |
| |
| if (wait_for_bit_change(DSI_PLL_GO, 0, 0) != 0) { |
| DSSERR("dsi pll go bit not going down.\n"); |
| r = -EIO; |
| goto err; |
| } |
| |
| if (wait_for_bit_change(DSI_PLL_STATUS, 1, 1) != 1) { |
| DSSERR("cannot lock PLL\n"); |
| r = -EIO; |
| goto err; |
| } |
| |
| dsi.pll_locked = 1; |
| |
| l = dsi_read_reg(DSI_PLL_CONFIGURATION2); |
| l = FLD_MOD(l, 0, 0, 0); /* DSI_PLL_IDLE */ |
| l = FLD_MOD(l, 0, 5, 5); /* DSI_PLL_PLLLPMODE */ |
| l = FLD_MOD(l, 0, 6, 6); /* DSI_PLL_LOWCURRSTBY */ |
| l = FLD_MOD(l, 0, 7, 7); /* DSI_PLL_TIGHTPHASELOCK */ |
| l = FLD_MOD(l, 0, 8, 8); /* DSI_PLL_DRIFTGUARDEN */ |
| l = FLD_MOD(l, 0, 10, 9); /* DSI_PLL_LOCKSEL */ |
| l = FLD_MOD(l, 1, 13, 13); /* DSI_PLL_REFEN */ |
| l = FLD_MOD(l, 1, 14, 14); /* DSIPHY_CLKINEN */ |
| l = FLD_MOD(l, 0, 15, 15); /* DSI_BYPASSEN */ |
| l = FLD_MOD(l, 1, 16, 16); /* DSS_CLOCK_EN */ |
| l = FLD_MOD(l, 0, 17, 17); /* DSS_CLOCK_PWDN */ |
| l = FLD_MOD(l, 1, 18, 18); /* DSI_PROTO_CLOCK_EN */ |
| l = FLD_MOD(l, 0, 19, 19); /* DSI_PROTO_CLOCK_PWDN */ |
| l = FLD_MOD(l, 0, 20, 20); /* DSI_HSDIVBYPASS */ |
| dsi_write_reg(DSI_PLL_CONFIGURATION2, l); |
| |
| DSSDBG("PLL config done\n"); |
| err: |
| return r; |
| } |
| |
| int dsi_pll_init(struct omap_dss_device *dssdev, bool enable_hsclk, |
| bool enable_hsdiv) |
| { |
| int r = 0; |
| enum dsi_pll_power_state pwstate; |
| |
| DSSDBG("PLL init\n"); |
| |
| enable_clocks(1); |
| dsi_enable_pll_clock(1); |
| |
| r = regulator_enable(dsi.vdds_dsi_reg); |
| if (r) |
| goto err0; |
| |
| /* XXX PLL does not come out of reset without this... */ |
| dispc_pck_free_enable(1); |
| |
| if (wait_for_bit_change(DSI_PLL_STATUS, 0, 1) != 1) { |
| DSSERR("PLL not coming out of reset.\n"); |
| r = -ENODEV; |
| goto err1; |
| } |
| |
| /* XXX ... but if left on, we get problems when planes do not |
| * fill the whole display. No idea about this */ |
| dispc_pck_free_enable(0); |
| |
| if (enable_hsclk && enable_hsdiv) |
| pwstate = DSI_PLL_POWER_ON_ALL; |
| else if (enable_hsclk) |
| pwstate = DSI_PLL_POWER_ON_HSCLK; |
| else if (enable_hsdiv) |
| pwstate = DSI_PLL_POWER_ON_DIV; |
| else |
| pwstate = DSI_PLL_POWER_OFF; |
| |
| r = dsi_pll_power(pwstate); |
| |
| if (r) |
| goto err1; |
| |
| DSSDBG("PLL init done\n"); |
| |
| return 0; |
| err1: |
| regulator_disable(dsi.vdds_dsi_reg); |
| err0: |
| enable_clocks(0); |
| dsi_enable_pll_clock(0); |
| return r; |
| } |
| |
| void dsi_pll_uninit(void) |
| { |
| enable_clocks(0); |
| dsi_enable_pll_clock(0); |
| |
| dsi.pll_locked = 0; |
| dsi_pll_power(DSI_PLL_POWER_OFF); |
| regulator_disable(dsi.vdds_dsi_reg); |
| DSSDBG("PLL uninit done\n"); |
| } |
| |
| void dsi_dump_clocks(struct seq_file *s) |
| { |
| int clksel; |
| struct dsi_clock_info *cinfo = &dsi.current_cinfo; |
| |
| enable_clocks(1); |
| |
| clksel = REG_GET(DSI_PLL_CONFIGURATION2, 11, 11); |
| |
| seq_printf(s, "- DSI PLL -\n"); |
| |
| seq_printf(s, "dsi pll source = %s\n", |
| clksel == 0 ? |
| "dss2_alwon_fclk" : "pclkfree"); |
| |
| seq_printf(s, "Fint\t\t%-16luregn %u\n", cinfo->fint, cinfo->regn); |
| |
| seq_printf(s, "CLKIN4DDR\t%-16luregm %u\n", |
| cinfo->clkin4ddr, cinfo->regm); |
| |
| seq_printf(s, "dsi1_pll_fck\t%-16luregm3 %u\t(%s)\n", |
| cinfo->dsi1_pll_fclk, |
| cinfo->regm3, |
| dss_get_dispc_clk_source() == DSS_SRC_DSS1_ALWON_FCLK ? |
| "off" : "on"); |
| |
| seq_printf(s, "dsi2_pll_fck\t%-16luregm4 %u\t(%s)\n", |
| cinfo->dsi2_pll_fclk, |
| cinfo->regm4, |
| dss_get_dsi_clk_source() == DSS_SRC_DSS1_ALWON_FCLK ? |
| "off" : "on"); |
| |
| seq_printf(s, "- DSI -\n"); |
| |
| seq_printf(s, "dsi fclk source = %s\n", |
| dss_get_dsi_clk_source() == DSS_SRC_DSS1_ALWON_FCLK ? |
| "dss1_alwon_fclk" : "dsi2_pll_fclk"); |
| |
| seq_printf(s, "DSI_FCLK\t%lu\n", dsi_fclk_rate()); |
| |
| seq_printf(s, "DDR_CLK\t\t%lu\n", |
| cinfo->clkin4ddr / 4); |
| |
| seq_printf(s, "TxByteClkHS\t%lu\n", dsi_get_txbyteclkhs()); |
| |
| seq_printf(s, "LP_CLK\t\t%lu\n", cinfo->lp_clk); |
| |
| seq_printf(s, "VP_CLK\t\t%lu\n" |
| "VP_PCLK\t\t%lu\n", |
| dispc_lclk_rate(), |
| dispc_pclk_rate()); |
| |
| enable_clocks(0); |
| } |
| |
| #ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS |
| void dsi_dump_irqs(struct seq_file *s) |
| { |
| unsigned long flags; |
| struct dsi_irq_stats stats; |
| |
| spin_lock_irqsave(&dsi.irq_stats_lock, flags); |
| |
| stats = dsi.irq_stats; |
| memset(&dsi.irq_stats, 0, sizeof(dsi.irq_stats)); |
| dsi.irq_stats.last_reset = jiffies; |
| |
| spin_unlock_irqrestore(&dsi.irq_stats_lock, flags); |
| |
| seq_printf(s, "period %u ms\n", |
| jiffies_to_msecs(jiffies - stats.last_reset)); |
| |
| seq_printf(s, "irqs %d\n", stats.irq_count); |
| #define PIS(x) \ |
| seq_printf(s, "%-20s %10d\n", #x, stats.dsi_irqs[ffs(DSI_IRQ_##x)-1]); |
| |
| seq_printf(s, "-- DSI interrupts --\n"); |
| PIS(VC0); |
| PIS(VC1); |
| PIS(VC2); |
| PIS(VC3); |
| PIS(WAKEUP); |
| PIS(RESYNC); |
| PIS(PLL_LOCK); |
| PIS(PLL_UNLOCK); |
| PIS(PLL_RECALL); |
| PIS(COMPLEXIO_ERR); |
| PIS(HS_TX_TIMEOUT); |
| PIS(LP_RX_TIMEOUT); |
| PIS(TE_TRIGGER); |
| PIS(ACK_TRIGGER); |
| PIS(SYNC_LOST); |
| PIS(LDO_POWER_GOOD); |
| PIS(TA_TIMEOUT); |
| #undef PIS |
| |
| #define PIS(x) \ |
| seq_printf(s, "%-20s %10d %10d %10d %10d\n", #x, \ |
| stats.vc_irqs[0][ffs(DSI_VC_IRQ_##x)-1], \ |
| stats.vc_irqs[1][ffs(DSI_VC_IRQ_##x)-1], \ |
| stats.vc_irqs[2][ffs(DSI_VC_IRQ_##x)-1], \ |
| stats.vc_irqs[3][ffs(DSI_VC_IRQ_##x)-1]); |
| |
| seq_printf(s, "-- VC interrupts --\n"); |
| PIS(CS); |
| PIS(ECC_CORR); |
| PIS(PACKET_SENT); |
| PIS(FIFO_TX_OVF); |
| PIS(FIFO_RX_OVF); |
| PIS(BTA); |
| PIS(ECC_NO_CORR); |
| PIS(FIFO_TX_UDF); |
| PIS(PP_BUSY_CHANGE); |
| #undef PIS |
| |
| #define PIS(x) \ |
| seq_printf(s, "%-20s %10d\n", #x, \ |
| stats.cio_irqs[ffs(DSI_CIO_IRQ_##x)-1]); |
| |
| seq_printf(s, "-- CIO interrupts --\n"); |
| PIS(ERRSYNCESC1); |
| PIS(ERRSYNCESC2); |
| PIS(ERRSYNCESC3); |
| PIS(ERRESC1); |
| PIS(ERRESC2); |
| PIS(ERRESC3); |
| PIS(ERRCONTROL1); |
| PIS(ERRCONTROL2); |
| PIS(ERRCONTROL3); |
| PIS(STATEULPS1); |
| PIS(STATEULPS2); |
| PIS(STATEULPS3); |
| PIS(ERRCONTENTIONLP0_1); |
| PIS(ERRCONTENTIONLP1_1); |
| PIS(ERRCONTENTIONLP0_2); |
| PIS(ERRCONTENTIONLP1_2); |
| PIS(ERRCONTENTIONLP0_3); |
| PIS(ERRCONTENTIONLP1_3); |
| PIS(ULPSACTIVENOT_ALL0); |
| PIS(ULPSACTIVENOT_ALL1); |
| #undef PIS |
| } |
| #endif |
| |
| void dsi_dump_regs(struct seq_file *s) |
| { |
| #define DUMPREG(r) seq_printf(s, "%-35s %08x\n", #r, dsi_read_reg(r)) |
| |
| dss_clk_enable(DSS_CLK_ICK | DSS_CLK_FCK1); |
| |
| DUMPREG(DSI_REVISION); |
| DUMPREG(DSI_SYSCONFIG); |
| DUMPREG(DSI_SYSSTATUS); |
| DUMPREG(DSI_IRQSTATUS); |
| DUMPREG(DSI_IRQENABLE); |
| DUMPREG(DSI_CTRL); |
| DUMPREG(DSI_COMPLEXIO_CFG1); |
| DUMPREG(DSI_COMPLEXIO_IRQ_STATUS); |
| DUMPREG(DSI_COMPLEXIO_IRQ_ENABLE); |
| DUMPREG(DSI_CLK_CTRL); |
| DUMPREG(DSI_TIMING1); |
| DUMPREG(DSI_TIMING2); |
| DUMPREG(DSI_VM_TIMING1); |
| DUMPREG(DSI_VM_TIMING2); |
| DUMPREG(DSI_VM_TIMING3); |
| DUMPREG(DSI_CLK_TIMING); |
| DUMPREG(DSI_TX_FIFO_VC_SIZE); |
| DUMPREG(DSI_RX_FIFO_VC_SIZE); |
| DUMPREG(DSI_COMPLEXIO_CFG2); |
| DUMPREG(DSI_RX_FIFO_VC_FULLNESS); |
| DUMPREG(DSI_VM_TIMING4); |
| DUMPREG(DSI_TX_FIFO_VC_EMPTINESS); |
| DUMPREG(DSI_VM_TIMING5); |
| DUMPREG(DSI_VM_TIMING6); |
| DUMPREG(DSI_VM_TIMING7); |
| DUMPREG(DSI_STOPCLK_TIMING); |
| |
| DUMPREG(DSI_VC_CTRL(0)); |
| DUMPREG(DSI_VC_TE(0)); |
| DUMPREG(DSI_VC_LONG_PACKET_HEADER(0)); |
| DUMPREG(DSI_VC_LONG_PACKET_PAYLOAD(0)); |
| DUMPREG(DSI_VC_SHORT_PACKET_HEADER(0)); |
| DUMPREG(DSI_VC_IRQSTATUS(0)); |
| DUMPREG(DSI_VC_IRQENABLE(0)); |
| |
| DUMPREG(DSI_VC_CTRL(1)); |
| DUMPREG(DSI_VC_TE(1)); |
| DUMPREG(DSI_VC_LONG_PACKET_HEADER(1)); |
| DUMPREG(DSI_VC_LONG_PACKET_PAYLOAD(1)); |
| DUMPREG(DSI_VC_SHORT_PACKET_HEADER(1)); |
| DUMPREG(DSI_VC_IRQSTATUS(1)); |
| DUMPREG(DSI_VC_IRQENABLE(1)); |
| |
| DUMPREG(DSI_VC_CTRL(2)); |
| DUMPREG(DSI_VC_TE(2)); |
| DUMPREG(DSI_VC_LONG_PACKET_HEADER(2)); |
| DUMPREG(DSI_VC_LONG_PACKET_PAYLOAD(2)); |
| DUMPREG(DSI_VC_SHORT_PACKET_HEADER(2)); |
| DUMPREG(DSI_VC_IRQSTATUS(2)); |
| DUMPREG(DSI_VC_IRQENABLE(2)); |
| |
| DUMPREG(DSI_VC_CTRL(3)); |
| DUMPREG(DSI_VC_TE(3)); |
| DUMPREG(DSI_VC_LONG_PACKET_HEADER(3)); |
| DUMPREG(DSI_VC_LONG_PACKET_PAYLOAD(3)); |
| DUMPREG(DSI_VC_SHORT_PACKET_HEADER(3)); |
| DUMPREG(DSI_VC_IRQSTATUS(3)); |
| DUMPREG(DSI_VC_IRQENABLE(3)); |
| |
| DUMPREG(DSI_DSIPHY_CFG0); |
| DUMPREG(DSI_DSIPHY_CFG1); |
| DUMPREG(DSI_DSIPHY_CFG2); |
| DUMPREG(DSI_DSIPHY_CFG5); |
| |
| DUMPREG(DSI_PLL_CONTROL); |
| DUMPREG(DSI_PLL_STATUS); |
| DUMPREG(DSI_PLL_GO); |
| DUMPREG(DSI_PLL_CONFIGURATION1); |
| DUMPREG(DSI_PLL_CONFIGURATION2); |
| |
| dss_clk_disable(DSS_CLK_ICK | DSS_CLK_FCK1); |
| #undef DUMPREG |
| } |
| |
| enum dsi_complexio_power_state { |
| DSI_COMPLEXIO_POWER_OFF = 0x0, |
| DSI_COMPLEXIO_POWER_ON = 0x1, |
| DSI_COMPLEXIO_POWER_ULPS = 0x2, |
| }; |
| |
| static int dsi_complexio_power(enum dsi_complexio_power_state state) |
| { |
| int t = 0; |
| |
| /* PWR_CMD */ |
| REG_FLD_MOD(DSI_COMPLEXIO_CFG1, state, 28, 27); |
| |
| /* PWR_STATUS */ |
| while (FLD_GET(dsi_read_reg(DSI_COMPLEXIO_CFG1), 26, 25) != state) { |
| if (++t > 1000) { |
| DSSERR("failed to set complexio power state to " |
| "%d\n", state); |
| return -ENODEV; |
| } |
| udelay(1); |
| } |
| |
| return 0; |
| } |
| |
| static void dsi_complexio_config(struct omap_dss_device *dssdev) |
| { |
| u32 r; |
| |
| int clk_lane = dssdev->phy.dsi.clk_lane; |
| int data1_lane = dssdev->phy.dsi.data1_lane; |
| int data2_lane = dssdev->phy.dsi.data2_lane; |
| int clk_pol = dssdev->phy.dsi.clk_pol; |
| int data1_pol = dssdev->phy.dsi.data1_pol; |
| int data2_pol = dssdev->phy.dsi.data2_pol; |
| |
| r = dsi_read_reg(DSI_COMPLEXIO_CFG1); |
| r = FLD_MOD(r, clk_lane, 2, 0); |
| r = FLD_MOD(r, clk_pol, 3, 3); |
| r = FLD_MOD(r, data1_lane, 6, 4); |
| r = FLD_MOD(r, data1_pol, 7, 7); |
| r = FLD_MOD(r, data2_lane, 10, 8); |
| r = FLD_MOD(r, data2_pol, 11, 11); |
| dsi_write_reg(DSI_COMPLEXIO_CFG1, r); |
| |
| /* The configuration of the DSI complex I/O (number of data lanes, |
| position, differential order) should not be changed while |
| DSS.DSI_CLK_CRTRL[20] LP_CLK_ENABLE bit is set to 1. In order for |
| the hardware to take into account a new configuration of the complex |
| I/O (done in DSS.DSI_COMPLEXIO_CFG1 register), it is recommended to |
| follow this sequence: First set the DSS.DSI_CTRL[0] IF_EN bit to 1, |
| then reset the DSS.DSI_CTRL[0] IF_EN to 0, then set |
| DSS.DSI_CLK_CTRL[20] LP_CLK_ENABLE to 1 and finally set again the |
| DSS.DSI_CTRL[0] IF_EN bit to 1. If the sequence is not followed, the |
| DSI complex I/O configuration is unknown. */ |
| |
| /* |
| REG_FLD_MOD(DSI_CTRL, 1, 0, 0); |
| REG_FLD_MOD(DSI_CTRL, 0, 0, 0); |
| REG_FLD_MOD(DSI_CLK_CTRL, 1, 20, 20); |
| REG_FLD_MOD(DSI_CTRL, 1, 0, 0); |
| */ |
| } |
| |
| static inline unsigned ns2ddr(unsigned ns) |
| { |
| /* convert time in ns to ddr ticks, rounding up */ |
| unsigned long ddr_clk = dsi.current_cinfo.clkin4ddr / 4; |
| return (ns * (ddr_clk / 1000 / 1000) + 999) / 1000; |
| } |
| |
| static inline unsigned ddr2ns(unsigned ddr) |
| { |
| unsigned long ddr_clk = dsi.current_cinfo.clkin4ddr / 4; |
| return ddr * 1000 * 1000 / (ddr_clk / 1000); |
| } |
| |
| static void dsi_complexio_timings(void) |
| { |
| u32 r; |
| u32 ths_prepare, ths_prepare_ths_zero, ths_trail, ths_exit; |
| u32 tlpx_half, tclk_trail, tclk_zero; |
| u32 tclk_prepare; |
| |
| /* calculate timings */ |
| |
| /* 1 * DDR_CLK = 2 * UI */ |
| |
| /* min 40ns + 4*UI max 85ns + 6*UI */ |
| ths_prepare = ns2ddr(70) + 2; |
| |
| /* min 145ns + 10*UI */ |
| ths_prepare_ths_zero = ns2ddr(175) + 2; |
| |
| /* min max(8*UI, 60ns+4*UI) */ |
| ths_trail = ns2ddr(60) + 5; |
| |
| /* min 100ns */ |
| ths_exit = ns2ddr(145); |
| |
| /* tlpx min 50n */ |
| tlpx_half = ns2ddr(25); |
| |
| /* min 60ns */ |
| tclk_trail = ns2ddr(60) + 2; |
| |
| /* min 38ns, max 95ns */ |
| tclk_prepare = ns2ddr(65); |
| |
| /* min tclk-prepare + tclk-zero = 300ns */ |
| tclk_zero = ns2ddr(260); |
| |
| DSSDBG("ths_prepare %u (%uns), ths_prepare_ths_zero %u (%uns)\n", |
| ths_prepare, ddr2ns(ths_prepare), |
| ths_prepare_ths_zero, ddr2ns(ths_prepare_ths_zero)); |
| DSSDBG("ths_trail %u (%uns), ths_exit %u (%uns)\n", |
| ths_trail, ddr2ns(ths_trail), |
| ths_exit, ddr2ns(ths_exit)); |
| |
| DSSDBG("tlpx_half %u (%uns), tclk_trail %u (%uns), " |
| "tclk_zero %u (%uns)\n", |
| tlpx_half, ddr2ns(tlpx_half), |
| tclk_trail, ddr2ns(tclk_trail), |
| tclk_zero, ddr2ns(tclk_zero)); |
| DSSDBG("tclk_prepare %u (%uns)\n", |
| tclk_prepare, ddr2ns(tclk_prepare)); |
| |
| /* program timings */ |
| |
| r = dsi_read_reg(DSI_DSIPHY_CFG0); |
| r = FLD_MOD(r, ths_prepare, 31, 24); |
| r = FLD_MOD(r, ths_prepare_ths_zero, 23, 16); |
| r = FLD_MOD(r, ths_trail, 15, 8); |
| r = FLD_MOD(r, ths_exit, 7, 0); |
| dsi_write_reg(DSI_DSIPHY_CFG0, r); |
| |
| r = dsi_read_reg(DSI_DSIPHY_CFG1); |
| r = FLD_MOD(r, tlpx_half, 22, 16); |
| r = FLD_MOD(r, tclk_trail, 15, 8); |
| r = FLD_MOD(r, tclk_zero, 7, 0); |
| dsi_write_reg(DSI_DSIPHY_CFG1, r); |
| |
| r = dsi_read_reg(DSI_DSIPHY_CFG2); |
| r = FLD_MOD(r, tclk_prepare, 7, 0); |
| dsi_write_reg(DSI_DSIPHY_CFG2, r); |
| } |
| |
| |
| static int dsi_complexio_init(struct omap_dss_device *dssdev) |
| { |
| int r = 0; |
| |
| DSSDBG("dsi_complexio_init\n"); |
| |
| /* CIO_CLK_ICG, enable L3 clk to CIO */ |
| REG_FLD_MOD(DSI_CLK_CTRL, 1, 14, 14); |
| |
| /* A dummy read using the SCP interface to any DSIPHY register is |
| * required after DSIPHY reset to complete the reset of the DSI complex |
| * I/O. */ |
| dsi_read_reg(DSI_DSIPHY_CFG5); |
| |
| if (wait_for_bit_change(DSI_DSIPHY_CFG5, 30, 1) != 1) { |
| DSSERR("ComplexIO PHY not coming out of reset.\n"); |
| r = -ENODEV; |
| goto err; |
| } |
| |
| dsi_complexio_config(dssdev); |
| |
| r = dsi_complexio_power(DSI_COMPLEXIO_POWER_ON); |
| |
| if (r) |
| goto err; |
| |
| if (wait_for_bit_change(DSI_COMPLEXIO_CFG1, 29, 1) != 1) { |
| DSSERR("ComplexIO not coming out of reset.\n"); |
| r = -ENODEV; |
| goto err; |
| } |
| |
| if (wait_for_bit_change(DSI_COMPLEXIO_CFG1, 21, 1) != 1) { |
| DSSERR("ComplexIO LDO power down.\n"); |
| r = -ENODEV; |
| goto err; |
| } |
| |
| dsi_complexio_timings(); |
| |
| /* |
| The configuration of the DSI complex I/O (number of data lanes, |
| position, differential order) should not be changed while |
| DSS.DSI_CLK_CRTRL[20] LP_CLK_ENABLE bit is set to 1. For the |
| hardware to recognize a new configuration of the complex I/O (done |
| in DSS.DSI_COMPLEXIO_CFG1 register), it is recommended to follow |
| this sequence: First set the DSS.DSI_CTRL[0] IF_EN bit to 1, next |
| reset the DSS.DSI_CTRL[0] IF_EN to 0, then set DSS.DSI_CLK_CTRL[20] |
| LP_CLK_ENABLE to 1, and finally, set again the DSS.DSI_CTRL[0] IF_EN |
| bit to 1. If the sequence is not followed, the DSi complex I/O |
| configuration is undetermined. |
| */ |
| dsi_if_enable(1); |
| dsi_if_enable(0); |
| REG_FLD_MOD(DSI_CLK_CTRL, 1, 20, 20); /* LP_CLK_ENABLE */ |
| dsi_if_enable(1); |
| dsi_if_enable(0); |
| |
| DSSDBG("CIO init done\n"); |
| err: |
| return r; |
| } |
| |
| static void dsi_complexio_uninit(void) |
| { |
| dsi_complexio_power(DSI_COMPLEXIO_POWER_OFF); |
| } |
| |
| static int _dsi_wait_reset(void) |
| { |
| int t = 0; |
| |
| while (REG_GET(DSI_SYSSTATUS, 0, 0) == 0) { |
| if (++t > 5) { |
| DSSERR("soft reset failed\n"); |
| return -ENODEV; |
| } |
| udelay(1); |
| } |
| |
| return 0; |
| } |
| |
| static int _dsi_reset(void) |
| { |
| /* Soft reset */ |
| REG_FLD_MOD(DSI_SYSCONFIG, 1, 1, 1); |
| return _dsi_wait_reset(); |
| } |
| |
| static void dsi_reset_tx_fifo(int channel) |
| { |
| u32 mask; |
| u32 l; |
| |
| /* set fifosize of the channel to 0, then return the old size */ |
| l = dsi_read_reg(DSI_TX_FIFO_VC_SIZE); |
| |
| mask = FLD_MASK((8 * channel) + 7, (8 * channel) + 4); |
| dsi_write_reg(DSI_TX_FIFO_VC_SIZE, l & ~mask); |
| |
| dsi_write_reg(DSI_TX_FIFO_VC_SIZE, l); |
| } |
| |
| static void dsi_config_tx_fifo(enum fifo_size size1, enum fifo_size size2, |
| enum fifo_size size3, enum fifo_size size4) |
| { |
| u32 r = 0; |
| int add = 0; |
| int i; |
| |
| dsi.vc[0].fifo_size = size1; |
| dsi.vc[1].fifo_size = size2; |
| dsi.vc[2].fifo_size = size3; |
| dsi.vc[3].fifo_size = size4; |
| |
| for (i = 0; i < 4; i++) { |
| u8 v; |
| int size = dsi.vc[i].fifo_size; |
| |
| if (add + size > 4) { |
| DSSERR("Illegal FIFO configuration\n"); |
| BUG(); |
| } |
| |
| v = FLD_VAL(add, 2, 0) | FLD_VAL(size, 7, 4); |
| r |= v << (8 * i); |
| /*DSSDBG("TX FIFO vc %d: size %d, add %d\n", i, size, add); */ |
| add += size; |
| } |
| |
| dsi_write_reg(DSI_TX_FIFO_VC_SIZE, r); |
| } |
| |
| static void dsi_config_rx_fifo(enum fifo_size size1, enum fifo_size size2, |
| enum fifo_size size3, enum fifo_size size4) |
| { |
| u32 r = 0; |
| int add = 0; |
| int i; |
| |
| dsi.vc[0].fifo_size = size1; |
| dsi.vc[1].fifo_size = size2; |
| dsi.vc[2].fifo_size = size3; |
| dsi.vc[3].fifo_size = size4; |
| |
| for (i = 0; i < 4; i++) { |
| u8 v; |
| int size = dsi.vc[i].fifo_size; |
| |
| if (add + size > 4) { |
| DSSERR("Illegal FIFO configuration\n"); |
| BUG(); |
| } |
| |
| v = FLD_VAL(add, 2, 0) | FLD_VAL(size, 7, 4); |
| r |= v << (8 * i); |
| /*DSSDBG("RX FIFO vc %d: size %d, add %d\n", i, size, add); */ |
| add += size; |
| } |
| |
| dsi_write_reg(DSI_RX_FIFO_VC_SIZE, r); |
| } |
| |
| static int dsi_force_tx_stop_mode_io(void) |
| { |
| u32 r; |
| |
| r = dsi_read_reg(DSI_TIMING1); |
| r = FLD_MOD(r, 1, 15, 15); /* FORCE_TX_STOP_MODE_IO */ |
| dsi_write_reg(DSI_TIMING1, r); |
| |
| if (wait_for_bit_change(DSI_TIMING1, 15, 0) != 0) { |
| DSSERR("TX_STOP bit not going down\n"); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static int dsi_vc_enable(int channel, bool enable) |
| { |
| DSSDBG("dsi_vc_enable channel %d, enable %d\n", |
| channel, enable); |
| |
| enable = enable ? 1 : 0; |
| |
| REG_FLD_MOD(DSI_VC_CTRL(channel), enable, 0, 0); |
| |
| if (wait_for_bit_change(DSI_VC_CTRL(channel), 0, enable) != enable) { |
| DSSERR("Failed to set dsi_vc_enable to %d\n", enable); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static void dsi_vc_initial_config(int channel) |
| { |
| u32 r; |
| |
| DSSDBGF("%d", channel); |
| |
| r = dsi_read_reg(DSI_VC_CTRL(channel)); |
| |
| if (FLD_GET(r, 15, 15)) /* VC_BUSY */ |
| DSSERR("VC(%d) busy when trying to configure it!\n", |
| channel); |
| |
| r = FLD_MOD(r, 0, 1, 1); /* SOURCE, 0 = L4 */ |
| r = FLD_MOD(r, 0, 2, 2); /* BTA_SHORT_EN */ |
| r = FLD_MOD(r, 0, 3, 3); /* BTA_LONG_EN */ |
| r = FLD_MOD(r, 0, 4, 4); /* MODE, 0 = command */ |
| r = FLD_MOD(r, 1, 7, 7); /* CS_TX_EN */ |
| r = FLD_MOD(r, 1, 8, 8); /* ECC_TX_EN */ |
| r = FLD_MOD(r, 0, 9, 9); /* MODE_SPEED, high speed on/off */ |
| |
| r = FLD_MOD(r, 4, 29, 27); /* DMA_RX_REQ_NB = no dma */ |
| r = FLD_MOD(r, 4, 23, 21); /* DMA_TX_REQ_NB = no dma */ |
| |
| dsi_write_reg(DSI_VC_CTRL(channel), r); |
| |
| dsi.vc[channel].mode = DSI_VC_MODE_L4; |
| } |
| |
| static void dsi_vc_config_l4(int channel) |
| { |
| if (dsi.vc[channel].mode == DSI_VC_MODE_L4) |
| return; |
| |
| DSSDBGF("%d", channel); |
| |
| dsi_vc_enable(channel, 0); |
| |
| if (REG_GET(DSI_VC_CTRL(channel), 15, 15)) /* VC_BUSY */ |
| DSSERR("vc(%d) busy when trying to config for L4\n", channel); |
| |
| REG_FLD_MOD(DSI_VC_CTRL(channel), 0, 1, 1); /* SOURCE, 0 = L4 */ |
| |
| dsi_vc_enable(channel, 1); |
| |
| dsi.vc[channel].mode = DSI_VC_MODE_L4; |
| } |
| |
| static void dsi_vc_config_vp(int channel) |
| { |
| if (dsi.vc[channel].mode == DSI_VC_MODE_VP) |
| return; |
| |
| DSSDBGF("%d", channel); |
| |
| dsi_vc_enable(channel, 0); |
| |
| if (REG_GET(DSI_VC_CTRL(channel), 15, 15)) /* VC_BUSY */ |
| DSSERR("vc(%d) busy when trying to config for VP\n", channel); |
| |
| REG_FLD_MOD(DSI_VC_CTRL(channel), 1, 1, 1); /* SOURCE, 1 = video port */ |
| |
| dsi_vc_enable(channel, 1); |
| |
| dsi.vc[channel].mode = DSI_VC_MODE_VP; |
| } |
| |
| |
| void omapdss_dsi_vc_enable_hs(int channel, bool enable) |
| { |
| DSSDBG("dsi_vc_enable_hs(%d, %d)\n", channel, enable); |
| |
| WARN_ON(!dsi_bus_is_locked()); |
| |
| dsi_vc_enable(channel, 0); |
| dsi_if_enable(0); |
| |
| REG_FLD_MOD(DSI_VC_CTRL(channel), enable, 9, 9); |
| |
| dsi_vc_enable(channel, 1); |
| dsi_if_enable(1); |
| |
| dsi_force_tx_stop_mode_io(); |
| } |
| EXPORT_SYMBOL(omapdss_dsi_vc_enable_hs); |
| |
| static void dsi_vc_flush_long_data(int channel) |
| { |
| while (REG_GET(DSI_VC_CTRL(channel), 20, 20)) { |
| u32 val; |
| val = dsi_read_reg(DSI_VC_SHORT_PACKET_HEADER(channel)); |
| DSSDBG("\t\tb1 %#02x b2 %#02x b3 %#02x b4 %#02x\n", |
| (val >> 0) & 0xff, |
| (val >> 8) & 0xff, |
| (val >> 16) & 0xff, |
| (val >> 24) & 0xff); |
| } |
| } |
| |
| static void dsi_show_rx_ack_with_err(u16 err) |
| { |
| DSSERR("\tACK with ERROR (%#x):\n", err); |
| if (err & (1 << 0)) |
| DSSERR("\t\tSoT Error\n"); |
| if (err & (1 << 1)) |
| DSSERR("\t\tSoT Sync Error\n"); |
| if (err & (1 << 2)) |
| DSSERR("\t\tEoT Sync Error\n"); |
| if (err & (1 << 3)) |
| DSSERR("\t\tEscape Mode Entry Command Error\n"); |
| if (err & (1 << 4)) |
| DSSERR("\t\tLP Transmit Sync Error\n"); |
| if (err & (1 << 5)) |
| DSSERR("\t\tHS Receive Timeout Error\n"); |
| if (err & (1 << 6)) |
| DSSERR("\t\tFalse Control Error\n"); |
| if (err & (1 << 7)) |
| DSSERR("\t\t(reserved7)\n"); |
| if (err & (1 << 8)) |
| DSSERR("\t\tECC Error, single-bit (corrected)\n"); |
| if (err & (1 << 9)) |
| DSSERR("\t\tECC Error, multi-bit (not corrected)\n"); |
| if (err & (1 << 10)) |
| DSSERR("\t\tChecksum Error\n"); |
| if (err & (1 << 11)) |
| DSSERR("\t\tData type not recognized\n"); |
| if (err & (1 << 12)) |
| DSSERR("\t\tInvalid VC ID\n"); |
| if (err & (1 << 13)) |
| DSSERR("\t\tInvalid Transmission Length\n"); |
| if (err & (1 << 14)) |
| DSSERR("\t\t(reserved14)\n"); |
| if (err & (1 << 15)) |
| DSSERR("\t\tDSI Protocol Violation\n"); |
| } |
| |
| static u16 dsi_vc_flush_receive_data(int channel) |
| { |
| /* RX_FIFO_NOT_EMPTY */ |
| while (REG_GET(DSI_VC_CTRL(channel), 20, 20)) { |
| u32 val; |
| u8 dt; |
| val = dsi_read_reg(DSI_VC_SHORT_PACKET_HEADER(channel)); |
| DSSDBG("\trawval %#08x\n", val); |
| dt = FLD_GET(val, 5, 0); |
| if (dt == DSI_DT_RX_ACK_WITH_ERR) { |
| u16 err = FLD_GET(val, 23, 8); |
| dsi_show_rx_ack_with_err(err); |
| } else if (dt == DSI_DT_RX_SHORT_READ_1) { |
| DSSDBG("\tDCS short response, 1 byte: %#x\n", |
| FLD_GET(val, 23, 8)); |
| } else if (dt == DSI_DT_RX_SHORT_READ_2) { |
| DSSDBG("\tDCS short response, 2 byte: %#x\n", |
| FLD_GET(val, 23, 8)); |
| } else if (dt == DSI_DT_RX_DCS_LONG_READ) { |
| DSSDBG("\tDCS long response, len %d\n", |
| FLD_GET(val, 23, 8)); |
| dsi_vc_flush_long_data(channel); |
| } else { |
| DSSERR("\tunknown datatype 0x%02x\n", dt); |
| } |
| } |
| return 0; |
| } |
| |
| static int dsi_vc_send_bta(int channel) |
| { |
| if (dsi.debug_write || dsi.debug_read) |
| DSSDBG("dsi_vc_send_bta %d\n", channel); |
| |
| WARN_ON(!dsi_bus_is_locked()); |
| |
| if (REG_GET(DSI_VC_CTRL(channel), 20, 20)) { /* RX_FIFO_NOT_EMPTY */ |
| DSSERR("rx fifo not empty when sending BTA, dumping data:\n"); |
| dsi_vc_flush_receive_data(channel); |
| } |
| |
| REG_FLD_MOD(DSI_VC_CTRL(channel), 1, 6, 6); /* BTA_EN */ |
| |
| return 0; |
| } |
| |
| int dsi_vc_send_bta_sync(int channel) |
| { |
| int r = 0; |
| u32 err; |
| |
| INIT_COMPLETION(dsi.bta_completion); |
| |
| dsi_vc_enable_bta_irq(channel); |
| |
| r = dsi_vc_send_bta(channel); |
| if (r) |
| goto err; |
| |
| if (wait_for_completion_timeout(&dsi.bta_completion, |
| msecs_to_jiffies(500)) == 0) { |
| DSSERR("Failed to receive BTA\n"); |
| r = -EIO; |
| goto err; |
| } |
| |
| err = dsi_get_errors(); |
| if (err) { |
| DSSERR("Error while sending BTA: %x\n", err); |
| r = -EIO; |
| goto err; |
| } |
| err: |
| dsi_vc_disable_bta_irq(channel); |
| |
| return r; |
| } |
| EXPORT_SYMBOL(dsi_vc_send_bta_sync); |
| |
| static inline void dsi_vc_write_long_header(int channel, u8 data_type, |
| u16 len, u8 ecc) |
| { |
| u32 val; |
| u8 data_id; |
| |
| WARN_ON(!dsi_bus_is_locked()); |
| |
| data_id = data_type | channel << 6; |
| |
| val = FLD_VAL(data_id, 7, 0) | FLD_VAL(len, 23, 8) | |
| FLD_VAL(ecc, 31, 24); |
| |
| dsi_write_reg(DSI_VC_LONG_PACKET_HEADER(channel), val); |
| } |
| |
| static inline void dsi_vc_write_long_payload(int channel, |
| u8 b1, u8 b2, u8 b3, u8 b4) |
| { |
| u32 val; |
| |
| val = b4 << 24 | b3 << 16 | b2 << 8 | b1 << 0; |
| |
| /* DSSDBG("\twriting %02x, %02x, %02x, %02x (%#010x)\n", |
| b1, b2, b3, b4, val); */ |
| |
| dsi_write_reg(DSI_VC_LONG_PACKET_PAYLOAD(channel), val); |
| } |
| |
| static int dsi_vc_send_long(int channel, u8 data_type, u8 *data, u16 len, |
| u8 ecc) |
| { |
| /*u32 val; */ |
| int i; |
| u8 *p; |
| int r = 0; |
| u8 b1, b2, b3, b4; |
| |
| if (dsi.debug_write) |
| DSSDBG("dsi_vc_send_long, %d bytes\n", len); |
| |
| /* len + header */ |
| if (dsi.vc[channel].fifo_size * 32 * 4 < len + 4) { |
| DSSERR("unable to send long packet: packet too long.\n"); |
| return -EINVAL; |
| } |
| |
| dsi_vc_config_l4(channel); |
| |
| dsi_vc_write_long_header(channel, data_type, len, ecc); |
| |
| p = data; |
| for (i = 0; i < len >> 2; i++) { |
| if (dsi.debug_write) |
| DSSDBG("\tsending full packet %d\n", i); |
| |
| b1 = *p++; |
| b2 = *p++; |
| b3 = *p++; |
| b4 = *p++; |
| |
| dsi_vc_write_long_payload(channel, b1, b2, b3, b4); |
| } |
| |
| i = len % 4; |
| if (i) { |
| b1 = 0; b2 = 0; b3 = 0; |
| |
| if (dsi.debug_write) |
| DSSDBG("\tsending remainder bytes %d\n", i); |
| |
| switch (i) { |
| case 3: |
| b1 = *p++; |
| b2 = *p++; |
| b3 = *p++; |
| break; |
| case 2: |
| b1 = *p++; |
| b2 = *p++; |
| break; |
| case 1: |
| b1 = *p++; |
| break; |
| } |
| |
| dsi_vc_write_long_payload(channel, b1, b2, b3, 0); |
| } |
| |
| return r; |
| } |
| |
| static int dsi_vc_send_short(int channel, u8 data_type, u16 data, u8 ecc) |
| { |
| u32 r; |
| u8 data_id; |
| |
| WARN_ON(!dsi_bus_is_locked()); |
| |
| if (dsi.debug_write) |
| DSSDBG("dsi_vc_send_short(ch%d, dt %#x, b1 %#x, b2 %#x)\n", |
| channel, |
| data_type, data & 0xff, (data >> 8) & 0xff); |
| |
| dsi_vc_config_l4(channel); |
| |
| if (FLD_GET(dsi_read_reg(DSI_VC_CTRL(channel)), 16, 16)) { |
| DSSERR("ERROR FIFO FULL, aborting transfer\n"); |
| return -EINVAL; |
| } |
| |
| data_id = data_type | channel << 6; |
| |
| r = (data_id << 0) | (data << 8) | (ecc << 24); |
| |
| dsi_write_reg(DSI_VC_SHORT_PACKET_HEADER(channel), r); |
| |
| return 0; |
| } |
| |
| int dsi_vc_send_null(int channel) |
| { |
| u8 nullpkg[] = {0, 0, 0, 0}; |
| return dsi_vc_send_long(channel, DSI_DT_NULL_PACKET, nullpkg, 4, 0); |
| } |
| EXPORT_SYMBOL(dsi_vc_send_null); |
| |
| int dsi_vc_dcs_write_nosync(int channel, u8 *data, int len) |
| { |
| int r; |
| |
| BUG_ON(len == 0); |
| |
| if (len == 1) { |
| r = dsi_vc_send_short(channel, DSI_DT_DCS_SHORT_WRITE_0, |
| data[0], 0); |
| } else if (len == 2) { |
| r = dsi_vc_send_short(channel, DSI_DT_DCS_SHORT_WRITE_1, |
| data[0] | (data[1] << 8), 0); |
| } else { |
| /* 0x39 = DCS Long Write */ |
| r = dsi_vc_send_long(channel, DSI_DT_DCS_LONG_WRITE, |
| data, len, 0); |
| } |
| |
| return r; |
| } |
| EXPORT_SYMBOL(dsi_vc_dcs_write_nosync); |
| |
| int dsi_vc_dcs_write(int channel, u8 *data, int len) |
| { |
| int r; |
| |
| r = dsi_vc_dcs_write_nosync(channel, data, len); |
| if (r) |
| goto err; |
| |
| r = dsi_vc_send_bta_sync(channel); |
| if (r) |
| goto err; |
| |
| return 0; |
| err: |
| DSSERR("dsi_vc_dcs_write(ch %d, cmd 0x%02x, len %d) failed\n", |
| channel, data[0], len); |
| return r; |
| } |
| EXPORT_SYMBOL(dsi_vc_dcs_write); |
| |
| int dsi_vc_dcs_write_0(int channel, u8 dcs_cmd) |
| { |
| return dsi_vc_dcs_write(channel, &dcs_cmd, 1); |
| } |
| EXPORT_SYMBOL(dsi_vc_dcs_write_0); |
| |
| int dsi_vc_dcs_write_1(int channel, u8 dcs_cmd, u8 param) |
| { |
| u8 buf[2]; |
| buf[0] = dcs_cmd; |
| buf[1] = param; |
| return dsi_vc_dcs_write(channel, buf, 2); |
| } |
| EXPORT_SYMBOL(dsi_vc_dcs_write_1); |
| |
| int dsi_vc_dcs_read(int channel, u8 dcs_cmd, u8 *buf, int buflen) |
| { |
| u32 val; |
| u8 dt; |
| int r; |
| |
| if (dsi.debug_read) |
| DSSDBG("dsi_vc_dcs_read(ch%d, dcs_cmd %x)\n", channel, dcs_cmd); |
| |
| r = dsi_vc_send_short(channel, DSI_DT_DCS_READ, dcs_cmd, 0); |
| if (r) |
| goto err; |
| |
| r = dsi_vc_send_bta_sync(channel); |
| if (r) |
| goto err; |
| |
| /* RX_FIFO_NOT_EMPTY */ |
| if (REG_GET(DSI_VC_CTRL(channel), 20, 20) == 0) { |
| DSSERR("RX fifo empty when trying to read.\n"); |
| r = -EIO; |
| goto err; |
| } |
| |
| val = dsi_read_reg(DSI_VC_SHORT_PACKET_HEADER(channel)); |
| if (dsi.debug_read) |
| DSSDBG("\theader: %08x\n", val); |
| dt = FLD_GET(val, 5, 0); |
| if (dt == DSI_DT_RX_ACK_WITH_ERR) { |
| u16 err = FLD_GET(val, 23, 8); |
| dsi_show_rx_ack_with_err(err); |
| r = -EIO; |
| goto err; |
| |
| } else if (dt == DSI_DT_RX_SHORT_READ_1) { |
| u8 data = FLD_GET(val, 15, 8); |
| if (dsi.debug_read) |
| DSSDBG("\tDCS short response, 1 byte: %02x\n", data); |
| |
| if (buflen < 1) { |
| r = -EIO; |
| goto err; |
| } |
| |
| buf[0] = data; |
| |
| return 1; |
| } else if (dt == DSI_DT_RX_SHORT_READ_2) { |
| u16 data = FLD_GET(val, 23, 8); |
| if (dsi.debug_read) |
| DSSDBG("\tDCS short response, 2 byte: %04x\n", data); |
| |
| if (buflen < 2) { |
| r = -EIO; |
| goto err; |
| } |
| |
| buf[0] = data & 0xff; |
| buf[1] = (data >> 8) & 0xff; |
| |
| return 2; |
| } else if (dt == DSI_DT_RX_DCS_LONG_READ) { |
| int w; |
| int len = FLD_GET(val, 23, 8); |
| if (dsi.debug_read) |
| DSSDBG("\tDCS long response, len %d\n", len); |
| |
| if (len > buflen) { |
| r = -EIO; |
| goto err; |
| } |
| |
| /* two byte checksum ends the packet, not included in len */ |
| for (w = 0; w < len + 2;) { |
| int b; |
| val = dsi_read_reg(DSI_VC_SHORT_PACKET_HEADER(channel)); |
| if (dsi.debug_read) |
| DSSDBG("\t\t%02x %02x %02x %02x\n", |
| (val >> 0) & 0xff, |
| (val >> 8) & 0xff, |
| (val >> 16) & 0xff, |
| (val >> 24) & 0xff); |
| |
| for (b = 0; b < 4; ++b) { |
| if (w < len) |
| buf[w] = (val >> (b * 8)) & 0xff; |
| /* we discard the 2 byte checksum */ |
| ++w; |
| } |
| } |
| |
| return len; |
| } else { |
| DSSERR("\tunknown datatype 0x%02x\n", dt); |
| r = -EIO; |
| goto err; |
| } |
| |
| BUG(); |
| err: |
| DSSERR("dsi_vc_dcs_read(ch %d, cmd 0x%02x) failed\n", |
| channel, dcs_cmd); |
| return r; |
| |
| } |
| EXPORT_SYMBOL(dsi_vc_dcs_read); |
| |
| int dsi_vc_dcs_read_1(int channel, u8 dcs_cmd, u8 *data) |
| { |
| int r; |
| |
| r = dsi_vc_dcs_read(channel, dcs_cmd, data, 1); |
| |
| if (r < 0) |
| return r; |
| |
| if (r != 1) |
| return -EIO; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(dsi_vc_dcs_read_1); |
| |
| int dsi_vc_dcs_read_2(int channel, u8 dcs_cmd, u16 *data) |
| { |
| int r; |
| |
| r = dsi_vc_dcs_read(channel, dcs_cmd, (u8 *)data, 2); |
| |
| if (r < 0) |
| return r; |
| |
| if (r != 2) |
| return -EIO; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(dsi_vc_dcs_read_2); |
| |
| int dsi_vc_set_max_rx_packet_size(int channel, u16 len) |
| { |
| int r; |
| r = dsi_vc_send_short(channel, DSI_DT_SET_MAX_RET_PKG_SIZE, |
| len, 0); |
| |
| if (r) |
| return r; |
| |
| r = dsi_vc_send_bta_sync(channel); |
| |
| return r; |
| } |
| EXPORT_SYMBOL(dsi_vc_set_max_rx_packet_size); |
| |
| static void dsi_set_lp_rx_timeout(unsigned long ns) |
| { |
| u32 r; |
| unsigned x4, x16; |
| unsigned long fck; |
| unsigned long ticks; |
| |
| /* ticks in DSI_FCK */ |
| |
| fck = dsi_fclk_rate(); |
| ticks = (fck / 1000 / 1000) * ns / 1000; |
| x4 = 0; |
| x16 = 0; |
| |
| if (ticks > 0x1fff) { |
| ticks = (fck / 1000 / 1000) * ns / 1000 / 4; |
| x4 = 1; |
| x16 = 0; |
| } |
| |
| if (ticks > 0x1fff) { |
| ticks = (fck / 1000 / 1000) * ns / 1000 / 16; |
| x4 = 0; |
| x16 = 1; |
| } |
| |
| if (ticks > 0x1fff) { |
| ticks = (fck / 1000 / 1000) * ns / 1000 / (4 * 16); |
| x4 = 1; |
| x16 = 1; |
| } |
| |
| if (ticks > 0x1fff) { |
| DSSWARN("LP_TX_TO over limit, setting it to max\n"); |
| ticks = 0x1fff; |
| x4 = 1; |
| x16 = 1; |
| } |
| |
| r = dsi_read_reg(DSI_TIMING2); |
| r = FLD_MOD(r, 1, 15, 15); /* LP_RX_TO */ |
| r = FLD_MOD(r, x16, 14, 14); /* LP_RX_TO_X16 */ |
| r = FLD_MOD(r, x4, 13, 13); /* LP_RX_TO_X4 */ |
| r = FLD_MOD(r, ticks, 12, 0); /* LP_RX_COUNTER */ |
| dsi_write_reg(DSI_TIMING2, r); |
| |
| DSSDBG("LP_RX_TO %lu ns (%#lx ticks%s%s)\n", |
| (ticks * (x16 ? 16 : 1) * (x4 ? 4 : 1) * 1000) / |
| (fck / 1000 / 1000), |
| ticks, x4 ? " x4" : "", x16 ? " x16" : ""); |
| } |
| |
| static void dsi_set_ta_timeout(unsigned long ns) |
| { |
| u32 r; |
| unsigned x8, x16; |
| unsigned long fck; |
| unsigned long ticks; |
| |
| /* ticks in DSI_FCK */ |
| fck = dsi_fclk_rate(); |
| ticks = (fck / 1000 / 1000) * ns / 1000; |
| x8 = 0; |
| x16 = 0; |
| |
| if (ticks > 0x1fff) { |
| ticks = (fck / 1000 / 1000) * ns / 1000 / 8; |
| x8 = 1; |
| x16 = 0; |
| } |
| |
| if (ticks > 0x1fff) { |
| ticks = (fck / 1000 / 1000) * ns / 1000 / 16; |
| x8 = 0; |
| x16 = 1; |
| } |
| |
| if (ticks > 0x1fff) { |
| ticks = (fck / 1000 / 1000) * ns / 1000 / (8 * 16); |
| x8 = 1; |
| x16 = 1; |
| } |
| |
| if (ticks > 0x1fff) { |
| DSSWARN("TA_TO over limit, setting it to max\n"); |
| ticks = 0x1fff; |
| x8 = 1; |
| x16 = 1; |
| } |
| |
| r = dsi_read_reg(DSI_TIMING1); |
| r = FLD_MOD(r, 1, 31, 31); /* TA_TO */ |
| r = FLD_MOD(r, x16, 30, 30); /* TA_TO_X16 */ |
| r = FLD_MOD(r, x8, 29, 29); /* TA_TO_X8 */ |
| r = FLD_MOD(r, ticks, 28, 16); /* TA_TO_COUNTER */ |
| dsi_write_reg(DSI_TIMING1, r); |
| |
| DSSDBG("TA_TO %lu ns (%#lx ticks%s%s)\n", |
| (ticks * (x16 ? 16 : 1) * (x8 ? 8 : 1) * 1000) / |
| (fck / 1000 / 1000), |
| ticks, x8 ? " x8" : "", x16 ? " x16" : ""); |
| } |
| |
| static void dsi_set_stop_state_counter(unsigned long ns) |
| { |
| u32 r; |
| unsigned x4, x16; |
| unsigned long fck; |
| unsigned long ticks; |
| |
| /* ticks in DSI_FCK */ |
| |
| fck = dsi_fclk_rate(); |
| ticks = (fck / 1000 / 1000) * ns / 1000; |
| x4 = 0; |
| x16 = 0; |
| |
| if (ticks > 0x1fff) { |
| ticks = (fck / 1000 / 1000) * ns / 1000 / 4; |
| x4 = 1; |
| x16 = 0; |
| } |
| |
| if (ticks > 0x1fff) { |
| ticks = (fck / 1000 / 1000) * ns / 1000 / 16; |
| x4 = 0; |
| x16 = 1; |
| } |
| |
| if (ticks > 0x1fff) { |
| ticks = (fck / 1000 / 1000) * ns / 1000 / (4 * 16); |
| x4 = 1; |
| x16 = 1; |
| } |
| |
| if (ticks > 0x1fff) { |
| DSSWARN("STOP_STATE_COUNTER_IO over limit, " |
| "setting it to max\n"); |
| ticks = 0x1fff; |
| x4 = 1; |
| x16 = 1; |
| } |
| |
| r = dsi_read_reg(DSI_TIMING1); |
| r = FLD_MOD(r, 1, 15, 15); /* FORCE_TX_STOP_MODE_IO */ |
| r = FLD_MOD(r, x16, 14, 14); /* STOP_STATE_X16_IO */ |
| r = FLD_MOD(r, x4, 13, 13); /* STOP_STATE_X4_IO */ |
| r = FLD_MOD(r, ticks, 12, 0); /* STOP_STATE_COUNTER_IO */ |
| dsi_write_reg(DSI_TIMING1, r); |
| |
| DSSDBG("STOP_STATE_COUNTER %lu ns (%#lx ticks%s%s)\n", |
| (ticks * (x16 ? 16 : 1) * (x4 ? 4 : 1) * 1000) / |
| (fck / 1000 / 1000), |
| ticks, x4 ? " x4" : "", x16 ? " x16" : ""); |
| } |
| |
| static void dsi_set_hs_tx_timeout(unsigned long ns) |
| { |
| u32 r; |
| unsigned x4, x16; |
| unsigned long fck; |
| unsigned long ticks; |
| |
| /* ticks in TxByteClkHS */ |
| |
| fck = dsi_get_txbyteclkhs(); |
| ticks = (fck / 1000 / 1000) * ns / 1000; |
| x4 = 0; |
| x16 = 0; |
| |
| if (ticks > 0x1fff) { |
| ticks = (fck / 1000 / 1000) * ns / 1000 / 4; |
| x4 = 1; |
| x16 = 0; |
| } |
| |
| if (ticks > 0x1fff) { |
| ticks = (fck / 1000 / 1000) * ns / 1000 / 16; |
| x4 = 0; |
| x16 = 1; |
| } |
| |
| if (ticks > 0x1fff) { |
| ticks = (fck / 1000 / 1000) * ns / 1000 / (4 * 16); |
| x4 = 1; |
| x16 = 1; |
| } |
| |
| if (ticks > 0x1fff) { |
| DSSWARN("HS_TX_TO over limit, setting it to max\n"); |
| ticks = 0x1fff; |
| x4 = 1; |
| x16 = 1; |
| } |
| |
| r = dsi_read_reg(DSI_TIMING2); |
| r = FLD_MOD(r, 1, 31, 31); /* HS_TX_TO */ |
| r = FLD_MOD(r, x16, 30, 30); /* HS_TX_TO_X16 */ |
| r = FLD_MOD(r, x4, 29, 29); /* HS_TX_TO_X8 (4 really) */ |
| r = FLD_MOD(r, ticks, 28, 16); /* HS_TX_TO_COUNTER */ |
| dsi_write_reg(DSI_TIMING2, r); |
| |
| DSSDBG("HS_TX_TO %lu ns (%#lx ticks%s%s)\n", |
| (ticks * (x16 ? 16 : 1) * (x4 ? 4 : 1) * 1000) / |
| (fck / 1000 / 1000), |
| ticks, x4 ? " x4" : "", x16 ? " x16" : ""); |
| } |
| static int dsi_proto_config(struct omap_dss_device *dssdev) |
| { |
| u32 r; |
| int buswidth = 0; |
| |
| dsi_config_tx_fifo(DSI_FIFO_SIZE_32, |
| DSI_FIFO_SIZE_32, |
| DSI_FIFO_SIZE_32, |
| DSI_FIFO_SIZE_32); |
| |
| dsi_config_rx_fifo(DSI_FIFO_SIZE_32, |
| DSI_FIFO_SIZE_32, |
| DSI_FIFO_SIZE_32, |
| DSI_FIFO_SIZE_32); |
| |
| /* XXX what values for the timeouts? */ |
| dsi_set_stop_state_counter(1000); |
| dsi_set_ta_timeout(6400000); |
| dsi_set_lp_rx_timeout(48000); |
| dsi_set_hs_tx_timeout(1000000); |
| |
| switch (dssdev->ctrl.pixel_size) { |
| case 16: |
| buswidth = 0; |
| break; |
| case 18: |
| buswidth = 1; |
| break; |
| case 24: |
| buswidth = 2; |
| break; |
| default: |
| BUG(); |
| } |
| |
| r = dsi_read_reg(DSI_CTRL); |
| r = FLD_MOD(r, 1, 1, 1); /* CS_RX_EN */ |
| r = FLD_MOD(r, 1, 2, 2); /* ECC_RX_EN */ |
| r = FLD_MOD(r, 1, 3, 3); /* TX_FIFO_ARBITRATION */ |
| r = FLD_MOD(r, 1, 4, 4); /* VP_CLK_RATIO, always 1, see errata*/ |
| r = FLD_MOD(r, buswidth, 7, 6); /* VP_DATA_BUS_WIDTH */ |
| r = FLD_MOD(r, 0, 8, 8); /* VP_CLK_POL */ |
| r = FLD_MOD(r, 2, 13, 12); /* LINE_BUFFER, 2 lines */ |
| r = FLD_MOD(r, 1, 14, 14); /* TRIGGER_RESET_MODE */ |
| r = FLD_MOD(r, 1, 19, 19); /* EOT_ENABLE */ |
| r = FLD_MOD(r, 1, 24, 24); /* DCS_CMD_ENABLE */ |
| r = FLD_MOD(r, 0, 25, 25); /* DCS_CMD_CODE, 1=start, 0=continue */ |
| |
| dsi_write_reg(DSI_CTRL, r); |
| |
| dsi_vc_initial_config(0); |
| dsi_vc_initial_config(1); |
| dsi_vc_initial_config(2); |
| dsi_vc_initial_config(3); |
| |
| return 0; |
| } |
| |
| static void dsi_proto_timings(struct omap_dss_device *dssdev) |
| { |
| unsigned tlpx, tclk_zero, tclk_prepare, tclk_trail; |
| unsigned tclk_pre, tclk_post; |
| unsigned ths_prepare, ths_prepare_ths_zero, ths_zero; |
| unsigned ths_trail, ths_exit; |
| unsigned ddr_clk_pre, ddr_clk_post; |
| unsigned enter_hs_mode_lat, exit_hs_mode_lat; |
| unsigned ths_eot; |
| u32 r; |
| |
| r = dsi_read_reg(DSI_DSIPHY_CFG0); |
| ths_prepare = FLD_GET(r, 31, 24); |
| ths_prepare_ths_zero = FLD_GET(r, 23, 16); |
| ths_zero = ths_prepare_ths_zero - ths_prepare; |
| ths_trail = FLD_GET(r, 15, 8); |
| ths_exit = FLD_GET(r, 7, 0); |
| |
| r = dsi_read_reg(DSI_DSIPHY_CFG1); |
| tlpx = FLD_GET(r, 22, 16) * 2; |
| tclk_trail = FLD_GET(r, 15, 8); |
| tclk_zero = FLD_GET(r, 7, 0); |
| |
| r = dsi_read_reg(DSI_DSIPHY_CFG2); |
| tclk_prepare = FLD_GET(r, 7, 0); |
| |
| /* min 8*UI */ |
| tclk_pre = 20; |
| /* min 60ns + 52*UI */ |
| tclk_post = ns2ddr(60) + 26; |
| |
| /* ths_eot is 2 for 2 datalanes and 4 for 1 datalane */ |
| if (dssdev->phy.dsi.data1_lane != 0 && |
| dssdev->phy.dsi.data2_lane != 0) |
| ths_eot = 2; |
| else |
| ths_eot = 4; |
| |
| ddr_clk_pre = DIV_ROUND_UP(tclk_pre + tlpx + tclk_zero + tclk_prepare, |
| 4); |
| ddr_clk_post = DIV_ROUND_UP(tclk_post + ths_trail, 4) + ths_eot; |
| |
| BUG_ON(ddr_clk_pre == 0 || ddr_clk_pre > 255); |
| BUG_ON(ddr_clk_post == 0 || ddr_clk_post > 255); |
| |
| r = dsi_read_reg(DSI_CLK_TIMING); |
| r = FLD_MOD(r, ddr_clk_pre, 15, 8); |
| r = FLD_MOD(r, ddr_clk_post, 7, 0); |
| dsi_write_reg(DSI_CLK_TIMING, r); |
| |
| DSSDBG("ddr_clk_pre %u, ddr_clk_post %u\n", |
| ddr_clk_pre, |
| ddr_clk_post); |
| |
| enter_hs_mode_lat = 1 + DIV_ROUND_UP(tlpx, 4) + |
| DIV_ROUND_UP(ths_prepare, 4) + |
| DIV_ROUND_UP(ths_zero + 3, 4); |
| |
| exit_hs_mode_lat = DIV_ROUND_UP(ths_trail + ths_exit, 4) + 1 + ths_eot; |
| |
| r = FLD_VAL(enter_hs_mode_lat, 31, 16) | |
| FLD_VAL(exit_hs_mode_lat, 15, 0); |
| dsi_write_reg(DSI_VM_TIMING7, r); |
| |
| DSSDBG("enter_hs_mode_lat %u, exit_hs_mode_lat %u\n", |
| enter_hs_mode_lat, exit_hs_mode_lat); |
| } |
| |
| |
| #define DSI_DECL_VARS \ |
| int __dsi_cb = 0; u32 __dsi_cv = 0; |
| |
| #define DSI_FLUSH(ch) \ |
| if (__dsi_cb > 0) { \ |
| /*DSSDBG("sending long packet %#010x\n", __dsi_cv);*/ \ |
| dsi_write_reg(DSI_VC_LONG_PACKET_PAYLOAD(ch), __dsi_cv); \ |
| __dsi_cb = __dsi_cv = 0; \ |
| } |
| |
| #define DSI_PUSH(ch, data) \ |
| do { \ |
| __dsi_cv |= (data) << (__dsi_cb * 8); \ |
| /*DSSDBG("cv = %#010x, cb = %d\n", __dsi_cv, __dsi_cb);*/ \ |
| if (++__dsi_cb > 3) \ |
| DSI_FLUSH(ch); \ |
| } while (0) |
| |
| static int dsi_update_screen_l4(struct omap_dss_device *dssdev, |
| int x, int y, int w, int h) |
| { |
| /* Note: supports only 24bit colors in 32bit container */ |
| int first = 1; |
| int fifo_stalls = 0; |
| int max_dsi_packet_size; |
| int max_data_per_packet; |
| int max_pixels_per_packet; |
| int pixels_left; |
| int bytespp = dssdev->ctrl.pixel_size / 8; |
| int scr_width; |
| u32 __iomem *data; |
| int start_offset; |
| int horiz_inc; |
| int current_x; |
| struct omap_overlay *ovl; |
| |
| debug_irq = 0; |
| |
| DSSDBG("dsi_update_screen_l4 (%d,%d %dx%d)\n", |
| x, y, w, h); |
| |
| ovl = dssdev->manager->overlays[0]; |
| |
| if (ovl->info.color_mode != OMAP_DSS_COLOR_RGB24U) |
| return -EINVAL; |
| |
| if (dssdev->ctrl.pixel_size != 24) |
| return -EINVAL; |
| |
| scr_width = ovl->info.screen_width; |
| data = ovl->info.vaddr; |
| |
| start_offset = scr_width * y + x; |
| horiz_inc = scr_width - w; |
| current_x = x; |
| |
| /* We need header(4) + DCSCMD(1) + pixels(numpix*bytespp) bytes |
| * in fifo */ |
| |
| /* When using CPU, max long packet size is TX buffer size */ |
| max_dsi_packet_size = dsi.vc[0].fifo_size * 32 * 4; |
| |
| /* we seem to get better perf if we divide the tx fifo to half, |
| and while the other half is being sent, we fill the other half |
| max_dsi_packet_size /= 2; */ |
| |
| max_data_per_packet = max_dsi_packet_size - 4 - 1; |
| |
| max_pixels_per_packet = max_data_per_packet / bytespp; |
| |
| DSSDBG("max_pixels_per_packet %d\n", max_pixels_per_packet); |
| |
| pixels_left = w * h; |
| |
| DSSDBG("total pixels %d\n", pixels_left); |
| |
| data += start_offset; |
| |
| while (pixels_left > 0) { |
| /* 0x2c = write_memory_start */ |
| /* 0x3c = write_memory_continue */ |
| u8 dcs_cmd = first ? 0x2c : 0x3c; |
| int pixels; |
| DSI_DECL_VARS; |
| first = 0; |
| |
| #if 1 |
| /* using fifo not empty */ |
| /* TX_FIFO_NOT_EMPTY */ |
| while (FLD_GET(dsi_read_reg(DSI_VC_CTRL(0)), 5, 5)) { |
| fifo_stalls++; |
| if (fifo_stalls > 0xfffff) { |
| DSSERR("fifo stalls overflow, pixels left %d\n", |
| pixels_left); |
| dsi_if_enable(0); |
| return -EIO; |
| } |
| udelay(1); |
| } |
| #elif 1 |
| /* using fifo emptiness */ |
| while ((REG_GET(DSI_TX_FIFO_VC_EMPTINESS, 7, 0)+1)*4 < |
| max_dsi_packet_size) { |
| fifo_stalls++; |
| if (fifo_stalls > 0xfffff) { |
| DSSERR("fifo stalls overflow, pixels left %d\n", |
| pixels_left); |
| dsi_if_enable(0); |
| return -EIO; |
| } |
| } |
| #else |
| while ((REG_GET(DSI_TX_FIFO_VC_EMPTINESS, 7, 0)+1)*4 == 0) { |
| fifo_stalls++; |
| if (fifo_stalls > 0xfffff) { |
| DSSERR("fifo stalls overflow, pixels left %d\n", |
| pixels_left); |
| dsi_if_enable(0); |
| return -EIO; |
| } |
| } |
| #endif |
| pixels = min(max_pixels_per_packet, pixels_left); |
| |
| pixels_left -= pixels; |
| |
| dsi_vc_write_long_header(0, DSI_DT_DCS_LONG_WRITE, |
| 1 + pixels * bytespp, 0); |
| |
| DSI_PUSH(0, dcs_cmd); |
| |
| while (pixels-- > 0) { |
| u32 pix = __raw_readl(data++); |
| |
| DSI_PUSH(0, (pix >> 16) & 0xff); |
| DSI_PUSH(0, (pix >> 8) & 0xff); |
| DSI_PUSH(0, (pix >> 0) & 0xff); |
| |
| current_x++; |
| if (current_x == x+w) { |
| current_x = x; |
| data += horiz_inc; |
| } |
| } |
| |
| DSI_FLUSH(0); |
| } |
| |
| return 0; |
| } |
| |
| static void dsi_update_screen_dispc(struct omap_dss_device *dssdev, |
| u16 x, u16 y, u16 w, u16 h) |
| { |
| unsigned bytespp; |
| unsigned bytespl; |
| unsigned bytespf; |
| unsigned total_len; |
| unsigned packet_payload; |
| unsigned packet_len; |
| u32 l; |
| const unsigned channel = dsi.update_channel; |
| /* line buffer is 1024 x 24bits */ |
| /* XXX: for some reason using full buffer size causes considerable TX |
| * slowdown with update sizes that fill the whole buffer */ |
| const unsigned line_buf_size = 1023 * 3; |
| |
| DSSDBG("dsi_update_screen_dispc(%d,%d %dx%d)\n", |
| x, y, w, h); |
| |
| dsi_vc_config_vp(channel); |
| |
| bytespp = dssdev->ctrl.pixel_size / 8; |
| bytespl = w * bytespp; |
| bytespf = bytespl * h; |
| |
| /* NOTE: packet_payload has to be equal to N * bytespl, where N is |
| * number of lines in a packet. See errata about VP_CLK_RATIO */ |
| |
| if (bytespf < line_buf_size) |
| packet_payload = bytespf; |
| else |
| packet_payload = (line_buf_size) / bytespl * bytespl; |
| |
| packet_len = packet_payload + 1; /* 1 byte for DCS cmd */ |
| total_len = (bytespf / packet_payload) * packet_len; |
| |
| if (bytespf % packet_payload) |
| total_len += (bytespf % packet_payload) + 1; |
| |
| l = FLD_VAL(total_len, 23, 0); /* TE_SIZE */ |
| dsi_write_reg(DSI_VC_TE(channel), l); |
| |
| dsi_vc_write_long_header(channel, DSI_DT_DCS_LONG_WRITE, packet_len, 0); |
| |
| if (dsi.te_enabled) |
| l = FLD_MOD(l, 1, 30, 30); /* TE_EN */ |
| else |
| l = FLD_MOD(l, 1, 31, 31); /* TE_START */ |
| dsi_write_reg(DSI_VC_TE(channel), l); |
| |
| /* We put SIDLEMODE to no-idle for the duration of the transfer, |
| * because DSS interrupts are not capable of waking up the CPU and the |
| * framedone interrupt could be delayed for quite a long time. I think |
| * the same goes for any DSS interrupts, but for some reason I have not |
| * seen the problem anywhere else than here. |
| */ |
| dispc_disable_sidle(); |
| |
| dsi_perf_mark_start(); |
| |
| schedule_delayed_work(&dsi.framedone_timeout_work, |
| msecs_to_jiffies(250)); |
| |
| dss_start_update(dssdev); |
| |
| if (dsi.te_enabled) { |
| /* disable LP_RX_TO, so that we can receive TE. Time to wait |
| * for TE is longer than the timer allows */ |
| REG_FLD_MOD(DSI_TIMING2, 0, 15, 15); /* LP_RX_TO */ |
| |
| dsi_vc_send_bta(channel); |
| |
| #ifdef DSI_CATCH_MISSING_TE |
| mod_timer(&dsi.te_timer, jiffies + msecs_to_jiffies(250)); |
| #endif |
| } |
| } |
| |
| #ifdef DSI_CATCH_MISSING_TE |
| static void dsi_te_timeout(unsigned long arg) |
| { |
| DSSERR("TE not received for 250ms!\n"); |
| } |
| #endif |
| |
| static void dsi_framedone_timeout_work_callback(struct work_struct *work) |
| { |
| int r; |
| const int channel = dsi.update_channel; |
| |
| DSSERR("Framedone not received for 250ms!\n"); |
| |
| /* SIDLEMODE back to smart-idle */ |
| dispc_enable_sidle(); |
| |
| if (dsi.te_enabled) { |
| /* enable LP_RX_TO again after the TE */ |
| REG_FLD_MOD(DSI_TIMING2, 1, 15, 15); /* LP_RX_TO */ |
| } |
| |
| /* Send BTA after the frame. We need this for the TE to work, as TE |
| * trigger is only sent for BTAs without preceding packet. Thus we need |
| * to BTA after the pixel packets so that next BTA will cause TE |
| * trigger. |
| * |
| * This is not needed when TE is not in use, but we do it anyway to |
| * make sure that the transfer has been completed. It would be more |
| * optimal, but more complex, to wait only just before starting next |
| * transfer. */ |
| r = dsi_vc_send_bta_sync(channel); |
| if (r) |
| DSSERR("BTA after framedone failed\n"); |
| |
| /* RX_FIFO_NOT_EMPTY */ |
| if (REG_GET(DSI_VC_CTRL(channel), 20, 20)) { |
| DSSERR("Received error during frame transfer:\n"); |
| dsi_vc_flush_receive_data(channel); |
| } |
| |
| dsi.framedone_callback(-ETIMEDOUT, dsi.framedone_data); |
| } |
| |
| static void dsi_framedone_irq_callback(void *data, u32 mask) |
| { |
| /* Note: We get FRAMEDONE when DISPC has finished sending pixels and |
| * turns itself off. However, DSI still has the pixels in its buffers, |
| * and is sending the data. |
| */ |
| |
| /* SIDLEMODE back to smart-idle */ |
| dispc_enable_sidle(); |
| |
| schedule_work(&dsi.framedone_work); |
| } |
| |
| static void dsi_handle_framedone(void) |
| { |
| int r; |
| const int channel = dsi.update_channel; |
| |
| DSSDBG("FRAMEDONE\n"); |
| |
| if (dsi.te_enabled) { |
| /* enable LP_RX_TO again after the TE */ |
| REG_FLD_MOD(DSI_TIMING2, 1, 15, 15); /* LP_RX_TO */ |
| } |
| |
| /* Send BTA after the frame. We need this for the TE to work, as TE |
| * trigger is only sent for BTAs without preceding packet. Thus we need |
| * to BTA after the pixel packets so that next BTA will cause TE |
| * trigger. |
| * |
| * This is not needed when TE is not in use, but we do it anyway to |
| * make sure that the transfer has been completed. It would be more |
| * optimal, but more complex, to wait only just before starting next |
| * transfer. */ |
| r = dsi_vc_send_bta_sync(channel); |
| if (r) |
| DSSERR("BTA after framedone failed\n"); |
| |
| /* RX_FIFO_NOT_EMPTY */ |
| if (REG_GET(DSI_VC_CTRL(channel), 20, 20)) { |
| DSSERR("Received error during frame transfer:\n"); |
| dsi_vc_flush_receive_data(channel); |
| } |
| |
| #ifdef CONFIG_OMAP2_DSS_FAKE_VSYNC |
| dispc_fake_vsync_irq(); |
| #endif |
| } |
| |
| static void dsi_framedone_work_callback(struct work_struct *work) |
| { |
| DSSDBGF(); |
| |
| cancel_delayed_work_sync(&dsi.framedone_timeout_work); |
| |
| dsi_handle_framedone(); |
| |
| dsi_perf_show("DISPC"); |
| |
| dsi.framedone_callback(0, dsi.framedone_data); |
| } |
| |
| int omap_dsi_prepare_update(struct omap_dss_device *dssdev, |
| u16 *x, u16 *y, u16 *w, u16 *h) |
| { |
| u16 dw, dh; |
| |
| dssdev->driver->get_resolution(dssdev, &dw, &dh); |
| |
| if (*x > dw || *y > dh) |
| return -EINVAL; |
| |
| if (*x + *w > dw) |
| return -EINVAL; |
| |
| if (*y + *h > dh) |
| return -EINVAL; |
| |
| if (*w == 1) |
| return -EINVAL; |
| |
| if (*w == 0 || *h == 0) |
| return -EINVAL; |
| |
| dsi_perf_mark_setup(); |
| |
| if (dssdev->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) { |
| dss_setup_partial_planes(dssdev, x, y, w, h); |
| dispc_set_lcd_size(*w, *h); |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(omap_dsi_prepare_update); |
| |
| int omap_dsi_update(struct omap_dss_device *dssdev, |
| int channel, |
| u16 x, u16 y, u16 w, u16 h, |
| void (*callback)(int, void *), void *data) |
| { |
| dsi.update_channel = channel; |
| |
| if (dssdev->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) { |
| dsi.framedone_callback = callback; |
| dsi.framedone_data = data; |
| |
| dsi.update_region.x = x; |
| dsi.update_region.y = y; |
| dsi.update_region.w = w; |
| dsi.update_region.h = h; |
| dsi.update_region.device = dssdev; |
| |
| dsi_update_screen_dispc(dssdev, x, y, w, h); |
| } else { |
| dsi_update_screen_l4(dssdev, x, y, w, h); |
| dsi_perf_show("L4"); |
| callback(0, data); |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(omap_dsi_update); |
| |
| /* Display funcs */ |
| |
| static int dsi_display_init_dispc(struct omap_dss_device *dssdev) |
| { |
| int r; |
| |
| r = omap_dispc_register_isr(dsi_framedone_irq_callback, NULL, |
| DISPC_IRQ_FRAMEDONE); |
| if (r) { |
| DSSERR("can't get FRAMEDONE irq\n"); |
| return r; |
| } |
| |
| dispc_set_lcd_display_type(OMAP_DSS_LCD_DISPLAY_TFT); |
| |
| dispc_set_parallel_interface_mode(OMAP_DSS_PARALLELMODE_DSI); |
| dispc_enable_fifohandcheck(1); |
| |
| dispc_set_tft_data_lines(dssdev->ctrl.pixel_size); |
| |
| { |
| struct omap_video_timings timings = { |
| .hsw = 1, |
| .hfp = 1, |
| .hbp = 1, |
| .vsw = 1, |
| .vfp = 0, |
| .vbp = 0, |
| }; |
| |
| dispc_set_lcd_timings(&timings); |
| } |
| |
| return 0; |
| } |
| |
| static void dsi_display_uninit_dispc(struct omap_dss_device *dssdev) |
| { |
| omap_dispc_unregister_isr(dsi_framedone_irq_callback, NULL, |
| DISPC_IRQ_FRAMEDONE); |
| } |
| |
| static int dsi_configure_dsi_clocks(struct omap_dss_device *dssdev) |
| { |
| struct dsi_clock_info cinfo; |
| int r; |
| |
| /* we always use DSS2_FCK as input clock */ |
| cinfo.use_dss2_fck = true; |
| cinfo.regn = dssdev->phy.dsi.div.regn; |
| cinfo.regm = dssdev->phy.dsi.div.regm; |
| cinfo.regm3 = dssdev->phy.dsi.div.regm3; |
| cinfo.regm4 = dssdev->phy.dsi.div.regm4; |
| r = dsi_calc_clock_rates(&cinfo); |
| if (r) |
| return r; |
| |
| r = dsi_pll_set_clock_div(&cinfo); |
| if (r) { |
| DSSERR("Failed to set dsi clocks\n"); |
| return r; |
| } |
| |
| return 0; |
| } |
| |
| static int dsi_configure_dispc_clocks(struct omap_dss_device *dssdev) |
| { |
| struct dispc_clock_info dispc_cinfo; |
| int r; |
| unsigned long long fck; |
| |
| fck = dsi_get_dsi1_pll_rate(); |
| |
| dispc_cinfo.lck_div = dssdev->phy.dsi.div.lck_div; |
| dispc_cinfo.pck_div = dssdev->phy.dsi.div.pck_div; |
| |
| r = dispc_calc_clock_rates(fck, &dispc_cinfo); |
| if (r) { |
| DSSERR("Failed to calc dispc clocks\n"); |
| return r; |
| } |
| |
| r = dispc_set_clock_div(&dispc_cinfo); |
| if (r) { |
| DSSERR("Failed to set dispc clocks\n"); |
| return r; |
| } |
| |
| return 0; |
| } |
| |
| static int dsi_display_init_dsi(struct omap_dss_device *dssdev) |
| { |
| int r; |
| |
| _dsi_print_reset_status(); |
| |
| r = dsi_pll_init(dssdev, true, true); |
| if (r) |
| goto err0; |
| |
| r = dsi_configure_dsi_clocks(dssdev); |
| if (r) |
| goto err1; |
| |
| dss_select_dispc_clk_source(DSS_SRC_DSI1_PLL_FCLK); |
| dss_select_dsi_clk_source(DSS_SRC_DSI2_PLL_FCLK); |
| |
| DSSDBG("PLL OK\n"); |
| |
| r = dsi_configure_dispc_clocks(dssdev); |
| if (r) |
| goto err2; |
| |
| r = dsi_complexio_init(dssdev); |
| if (r) |
| goto err2; |
| |
| _dsi_print_reset_status(); |
| |
| dsi_proto_timings(dssdev); |
| dsi_set_lp_clk_divisor(dssdev); |
| |
| if (1) |
| _dsi_print_reset_status(); |
| |
| r = dsi_proto_config(dssdev); |
| if (r) |
| goto err3; |
| |
| /* enable interface */ |
| dsi_vc_enable(0, 1); |
| dsi_vc_enable(1, 1); |
| dsi_vc_enable(2, 1); |
| dsi_vc_enable(3, 1); |
| dsi_if_enable(1); |
| dsi_force_tx_stop_mode_io(); |
| |
| return 0; |
| err3: |
| dsi_complexio_uninit(); |
| err2: |
| dss_select_dispc_clk_source(DSS_SRC_DSS1_ALWON_FCLK); |
| dss_select_dsi_clk_source(DSS_SRC_DSS1_ALWON_FCLK); |
| err1: |
| dsi_pll_uninit(); |
| err0: |
| return r; |
| } |
| |
| static void dsi_display_uninit_dsi(struct omap_dss_device *dssdev) |
| { |
| dss_select_dispc_clk_source(DSS_SRC_DSS1_ALWON_FCLK); |
| dss_select_dsi_clk_source(DSS_SRC_DSS1_ALWON_FCLK); |
| dsi_complexio_uninit(); |
| dsi_pll_uninit(); |
| } |
| |
| static int dsi_core_init(void) |
| { |
| /* Autoidle */ |
| REG_FLD_MOD(DSI_SYSCONFIG, 1, 0, 0); |
| |
| /* ENWAKEUP */ |
| REG_FLD_MOD(DSI_SYSCONFIG, 1, 2, 2); |
| |
| /* SIDLEMODE smart-idle */ |
| REG_FLD_MOD(DSI_SYSCONFIG, 2, 4, 3); |
| |
| _dsi_initialize_irq(); |
| |
| return 0; |
| } |
| |
| int omapdss_dsi_display_enable(struct omap_dss_device *dssdev) |
| { |
| int r = 0; |
| |
| DSSDBG("dsi_display_enable\n"); |
| |
| WARN_ON(!dsi_bus_is_locked()); |
| |
| mutex_lock(&dsi.lock); |
| |
| r = omap_dss_start_device(dssdev); |
| if (r) { |
| DSSERR("failed to start device\n"); |
| goto err0; |
| } |
| |
| enable_clocks(1); |
| dsi_enable_pll_clock(1); |
| |
| r = _dsi_reset(); |
| if (r) |
| goto err1; |
| |
| dsi_core_init(); |
| |
| r = dsi_display_init_dispc(dssdev); |
| if (r) |
| goto err1; |
| |
| r = dsi_display_init_dsi(dssdev); |
| if (r) |
| goto err2; |
| |
| mutex_unlock(&dsi.lock); |
| |
| return 0; |
| |
| err2: |
| dsi_display_uninit_dispc(dssdev); |
| err1: |
| enable_clocks(0); |
| dsi_enable_pll_clock(0); |
| omap_dss_stop_device(dssdev); |
| err0: |
| mutex_unlock(&dsi.lock); |
| DSSDBG("dsi_display_enable FAILED\n"); |
| return r; |
| } |
| EXPORT_SYMBOL(omapdss_dsi_display_enable); |
| |
| void omapdss_dsi_display_disable(struct omap_dss_device *dssdev) |
| { |
| DSSDBG("dsi_display_disable\n"); |
| |
| WARN_ON(!dsi_bus_is_locked()); |
| |
| mutex_lock(&dsi.lock); |
| |
| dsi_display_uninit_dispc(dssdev); |
| |
| dsi_display_uninit_dsi(dssdev); |
| |
| enable_clocks(0); |
| dsi_enable_pll_clock(0); |
| |
| omap_dss_stop_device(dssdev); |
| |
| mutex_unlock(&dsi.lock); |
| } |
| EXPORT_SYMBOL(omapdss_dsi_display_disable); |
| |
| int omapdss_dsi_enable_te(struct omap_dss_device *dssdev, bool enable) |
| { |
| dsi.te_enabled = enable; |
| return 0; |
| } |
| EXPORT_SYMBOL(omapdss_dsi_enable_te); |
| |
| void dsi_get_overlay_fifo_thresholds(enum omap_plane plane, |
| u32 fifo_size, enum omap_burst_size *burst_size, |
| u32 *fifo_low, u32 *fifo_high) |
| { |
| unsigned burst_size_bytes; |
| |
| *burst_size = OMAP_DSS_BURST_16x32; |
| burst_size_bytes = 16 * 32 / 8; |
| |
| *fifo_high = fifo_size - burst_size_bytes; |
| *fifo_low = fifo_size - burst_size_bytes * 8; |
| } |
| |
| int dsi_init_display(struct omap_dss_device *dssdev) |
| { |
| DSSDBG("DSI init\n"); |
| |
| /* XXX these should be figured out dynamically */ |
| dssdev->caps = OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE | |
| OMAP_DSS_DISPLAY_CAP_TEAR_ELIM; |
| |
| dsi.vc[0].dssdev = dssdev; |
| dsi.vc[1].dssdev = dssdev; |
| |
| return 0; |
| } |
| |
| int dsi_init(struct platform_device *pdev) |
| { |
| u32 rev; |
| int r; |
| |
| spin_lock_init(&dsi.errors_lock); |
| dsi.errors = 0; |
| |
| #ifdef CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS |
| spin_lock_init(&dsi.irq_stats_lock); |
| dsi.irq_stats.last_reset = jiffies; |
| #endif |
| |
| init_completion(&dsi.bta_completion); |
| |
| mutex_init(&dsi.lock); |
| sema_init(&dsi.bus_lock, 1); |
| |
| INIT_WORK(&dsi.framedone_work, dsi_framedone_work_callback); |
| INIT_DELAYED_WORK_DEFERRABLE(&dsi.framedone_timeout_work, |
| dsi_framedone_timeout_work_callback); |
| |
| #ifdef DSI_CATCH_MISSING_TE |
| init_timer(&dsi.te_timer); |
| dsi.te_timer.function = dsi_te_timeout; |
| dsi.te_timer.data = 0; |
| #endif |
| dsi.base = ioremap(DSI_BASE, DSI_SZ_REGS); |
| if (!dsi.base) { |
| DSSERR("can't ioremap DSI\n"); |
| r = -ENOMEM; |
| goto err1; |
| } |
| |
| dsi.vdds_dsi_reg = dss_get_vdds_dsi(); |
| if (IS_ERR(dsi.vdds_dsi_reg)) { |
| iounmap(dsi.base); |
| DSSERR("can't get VDDS_DSI regulator\n"); |
| r = PTR_ERR(dsi.vdds_dsi_reg); |
| goto err2; |
| } |
| |
| enable_clocks(1); |
| |
| rev = dsi_read_reg(DSI_REVISION); |
| printk(KERN_INFO "OMAP DSI rev %d.%d\n", |
| FLD_GET(rev, 7, 4), FLD_GET(rev, 3, 0)); |
| |
| enable_clocks(0); |
| |
| return 0; |
| err2: |
| iounmap(dsi.base); |
| err1: |
| return r; |
| } |
| |
| void dsi_exit(void) |
| { |
| iounmap(dsi.base); |
| |
| DSSDBG("omap_dsi_exit\n"); |
| } |
| |