drivers/media/video/cx23885/cx23885-input.c - kernel/skids - Git at Google

 /*
  *  Driver for the Conexant CX23885/7/8 PCIe bridge
  *
  *  Infrared remote control input device
  *
  *  Most of this file is
  *
  *  Copyright (C) 2009  Andy Walls <awalls@md.metrocast.net>
  *
  *  However, the cx23885_input_{init,fini} functions contained herein are
  *  derived from Linux kernel files linux/media/video/.../...-input.c marked as:
  *
  *  Copyright (C) 2008 <srinivasa.deevi at conexant dot com>
  *  Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it>
  *		       Markus Rechberger <mrechberger@gmail.com>
  *		       Mauro Carvalho Chehab <mchehab@infradead.org>
  *		       Sascha Sommer <saschasommer@freenet.de>
  *  Copyright (C) 2004, 2005 Chris Pascoe
  *  Copyright (C) 2003, 2004 Gerd Knorr
  *  Copyright (C) 2003 Pavel Machek
  *
  *  This program is free software; you can redistribute it and/or
  *  modify it under the terms of the GNU General Public License
  *  as published by the Free Software Foundation; either version 2
  *  of the License, or (at your option) any later version.
  *
  *  This program is distributed in the hope that it will be useful,
  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *  GNU General Public License for more details.
  *
  *  You should have received a copy of the GNU General Public License
  *  along with this program; if not, write to the Free Software
  *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
  *  02110-1301, USA.
  */

 #include <linux/input.h>
 #include <linux/slab.h>
 #include <media/ir-common.h>
 #include <media/v4l2-subdev.h>

 #include "cx23885.h"

 #define RC5_BITS		14
 #define RC5_HALF_BITS		(2*RC5_BITS)
 #define RC5_HALF_BITS_MASK	((1 << RC5_HALF_BITS) - 1)

 #define RC5_START_BITS_NORMAL	0x3 /* Command range  0 -  63 */
 #define RC5_START_BITS_EXTENDED	0x2 /* Command range 64 - 127 */

 #define RC5_EXTENDED_COMMAND_OFFSET	64

 #define MODULE_NAME "cx23885"

 static inline unsigned int rc5_command(u32 rc5_baseband)
 {
 	return RC5_INSTR(rc5_baseband) +
 		((RC5_START(rc5_baseband) == RC5_START_BITS_EXTENDED)
 			? RC5_EXTENDED_COMMAND_OFFSET : 0);
 }

 static void cx23885_input_process_raw_rc5(struct cx23885_dev *dev)
 {
 	struct card_ir *ir_input = dev->ir_input;
 	unsigned int code, command;
 	u32 rc5;

 	/* Ignore codes that are too short to be valid RC-5 */
 	if (ir_input->last_bit < (RC5_HALF_BITS - 1))
 		return;

 	/* The library has the manchester coding backwards; XOR to adapt. */
 	code = (ir_input->code & RC5_HALF_BITS_MASK) ^ RC5_HALF_BITS_MASK;
 	rc5 = ir_rc5_decode(code);

 	switch (RC5_START(rc5)) {
 	case RC5_START_BITS_NORMAL:
 		break;
 	case RC5_START_BITS_EXTENDED:
 		/* Don't allow if the remote only emits standard commands */
 		if (ir_input->start == RC5_START_BITS_NORMAL)
 			return;
 		break;
 	default:
 		return;
 	}

 	if (ir_input->addr != RC5_ADDR(rc5))
 		return;

 	/* Don't generate a keypress for RC-5 auto-repeated keypresses */
 	command = rc5_command(rc5);
 	if (RC5_TOGGLE(rc5) != RC5_TOGGLE(ir_input->last_rc5) ||
 	    command != rc5_command(ir_input->last_rc5) ||
 	    /* Catch T == 0, CMD == 0 (e.g. '0') as first keypress after init */
 	    RC5_START(ir_input->last_rc5) == 0) {
 		/* This keypress is differnet: not an auto repeat */
 		ir_input_nokey(ir_input->dev, &ir_input->ir);
 		ir_input_keydown(ir_input->dev, &ir_input->ir, command);
 	}
 	ir_input->last_rc5 = rc5;

 	/* Schedule when we should do the key up event: ir_input_nokey() */
 	mod_timer(&ir_input->timer_keyup,
 		  jiffies + msecs_to_jiffies(ir_input->rc5_key_timeout));
 }

 static void cx23885_input_next_pulse_width_rc5(struct cx23885_dev *dev,
 					       u32 ns_pulse)
 {
 	const int rc5_quarterbit_ns = 444444; /* 32 cycles/36 kHz/2 = 444 us */
 	struct card_ir *ir_input = dev->ir_input;
 	int i, level, quarterbits, halfbits;

 	if (!ir_input->active) {
 		ir_input->active = 1;
 		/* assume an initial space that we may not detect or measure */
 		ir_input->code = 0;
 		ir_input->last_bit = 0;
 	}

 	if (ns_pulse == V4L2_SUBDEV_IR_PULSE_RX_SEQ_END) {
 		ir_input->last_bit++; /* Account for the final space */
 		ir_input->active = 0;
 		cx23885_input_process_raw_rc5(dev);
 		return;
 	}

 	level = (ns_pulse & V4L2_SUBDEV_IR_PULSE_LEVEL_MASK) ? 1 : 0;

 	/* Skip any leading space to sync to the start bit */
 	if (ir_input->last_bit == 0 && level == 0)
 		return;

 	/*
 	 * With valid RC-5 we can get up to two consecutive half-bits in a
 	 * single pulse measurment.  Experiments have shown that the duration
 	 * of a half-bit can vary.  Make sure we always end up with an even
 	 * number of quarter bits at the same level (mark or space).
 	 */
 	ns_pulse &= V4L2_SUBDEV_IR_PULSE_MAX_WIDTH_NS;
 	quarterbits = ns_pulse / rc5_quarterbit_ns;
 	if (quarterbits & 1)
 		quarterbits++;
 	halfbits = quarterbits / 2;

 	for (i = 0; i < halfbits; i++) {
 		ir_input->last_bit++;
 		ir_input->code |= (level << ir_input->last_bit);

 		if (ir_input->last_bit >= RC5_HALF_BITS-1) {
 			ir_input->active = 0;
 			cx23885_input_process_raw_rc5(dev);
 			/*
 			 * If level is 1, a leading mark is invalid for RC5.
 			 * If level is 0, we scan past extra intial space.
 			 * Either way we don't want to reactivate collecting
 			 * marks or spaces here with any left over half-bits.
 			 */
 			break;
 		}
 	}
 }

 static void cx23885_input_process_pulse_widths_rc5(struct cx23885_dev *dev,
 						   bool add_eom)
 {
 	struct card_ir *ir_input = dev->ir_input;
 	struct ir_input_state *ir_input_state = &ir_input->ir;

 	u32 ns_pulse[RC5_HALF_BITS+1];
 	ssize_t num = 0;
 	int count, i;

 	do {
 		v4l2_subdev_call(dev->sd_ir, ir, rx_read, (u8 *) ns_pulse,
 				 sizeof(ns_pulse), &num);

 		count = num / sizeof(u32);

 		/* Append an end of Rx seq, if the caller requested */
 		if (add_eom && count < ARRAY_SIZE(ns_pulse)) {
 			ns_pulse[count] = V4L2_SUBDEV_IR_PULSE_RX_SEQ_END;
 			count++;
 		}

 		/* Just drain the Rx FIFO, if we're called, but not RC-5 */
 		if (ir_input_state->ir_type != IR_TYPE_RC5)
 			continue;

 		for (i = 0; i < count; i++)
 			cx23885_input_next_pulse_width_rc5(dev, ns_pulse[i]);
 	} while (num != 0);
 }

 void cx23885_input_rx_work_handler(struct cx23885_dev *dev, u32 events)
 {
 	struct v4l2_subdev_ir_parameters params;
 	int overrun, data_available;

 	if (dev->sd_ir == NULL || events == 0)
 		return;

 	switch (dev->board) {
 	case CX23885_BOARD_HAUPPAUGE_HVR1850:
 	case CX23885_BOARD_HAUPPAUGE_HVR1290:
 		/*
 		 * The only board we handle right now.  However other boards
 		 * using the CX2388x integrated IR controller should be similar
 		 */
 		break;
 	default:
 		return;
 	}

 	overrun = events & (V4L2_SUBDEV_IR_RX_SW_FIFO_OVERRUN |
 			    V4L2_SUBDEV_IR_RX_HW_FIFO_OVERRUN);

 	data_available = events & (V4L2_SUBDEV_IR_RX_END_OF_RX_DETECTED |
 				   V4L2_SUBDEV_IR_RX_FIFO_SERVICE_REQ);

 	if (overrun) {
 		/* If there was a FIFO overrun, stop the device */
 		v4l2_subdev_call(dev->sd_ir, ir, rx_g_parameters, &params);
 		params.enable = false;
 		/* Mitigate race with cx23885_input_ir_stop() */
 		params.shutdown = atomic_read(&dev->ir_input_stopping);
 		v4l2_subdev_call(dev->sd_ir, ir, rx_s_parameters, &params);
 	}

 	if (data_available)
 		cx23885_input_process_pulse_widths_rc5(dev, overrun);

 	if (overrun) {
 		/* If there was a FIFO overrun, clear & restart the device */
 		params.enable = true;
 		/* Mitigate race with cx23885_input_ir_stop() */
 		params.shutdown = atomic_read(&dev->ir_input_stopping);
 		v4l2_subdev_call(dev->sd_ir, ir, rx_s_parameters, &params);
 	}
 }

 static void cx23885_input_ir_start(struct cx23885_dev *dev)
 {
 	struct card_ir *ir_input = dev->ir_input;
 	struct ir_input_state *ir_input_state = &ir_input->ir;
 	struct v4l2_subdev_ir_parameters params;

 	if (dev->sd_ir == NULL)
 		return;

 	atomic_set(&dev->ir_input_stopping, 0);

 	/* keyup timer set up, if needed */
 	switch (dev->board) {
 	case CX23885_BOARD_HAUPPAUGE_HVR1850:
 	case CX23885_BOARD_HAUPPAUGE_HVR1290:
 		setup_timer(&ir_input->timer_keyup,
 			    ir_rc5_timer_keyup,	/* Not actually RC-5 specific */
 			    (unsigned long) ir_input);
 		if (ir_input_state->ir_type == IR_TYPE_RC5) {
 			/*
 			 * RC-5 repeats a held key every
 			 * 64 bits * (2 * 32/36000) sec/bit = 113.778 ms
 			 */
 			ir_input->rc5_key_timeout = 115;
 		}
 		break;
 	}

 	v4l2_subdev_call(dev->sd_ir, ir, rx_g_parameters, &params);
 	switch (dev->board) {
 	case CX23885_BOARD_HAUPPAUGE_HVR1850:
 	case CX23885_BOARD_HAUPPAUGE_HVR1290:
 		/*
 		 * The IR controller on this board only returns pulse widths.
 		 * Any other mode setting will fail to set up the device.
 		*/
 		params.mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH;
 		params.enable = true;
 		params.interrupt_enable = true;
 		params.shutdown = false;

 		/* Setup for baseband compatible with both RC-5 and RC-6A */
 		params.modulation = false;
 		/* RC-5:  2,222,222 ns = 1/36 kHz * 32 cycles * 2 marks * 1.25*/
 		/* RC-6A: 3,333,333 ns = 1/36 kHz * 16 cycles * 6 marks * 1.25*/
 		params.max_pulse_width = 3333333; /* ns */
 		/* RC-5:    666,667 ns = 1/36 kHz * 32 cycles * 1 mark * 0.75 */
 		/* RC-6A:   333,333 ns = 1/36 kHz * 16 cycles * 1 mark * 0.75 */
 		params.noise_filter_min_width = 333333; /* ns */
 		/*
 		 * This board has inverted receive sense:
 		 * mark is received as low logic level;
 		 * falling edges are detected as rising edges; etc.
 		 */
 		params.invert = true;
 		break;
 	}
 	v4l2_subdev_call(dev->sd_ir, ir, rx_s_parameters, &params);
 }

 static void cx23885_input_ir_stop(struct cx23885_dev *dev)
 {
 	struct card_ir *ir_input = dev->ir_input;
 	struct v4l2_subdev_ir_parameters params;

 	if (dev->sd_ir == NULL)
 		return;

 	/*
 	 * Stop the sd_ir subdevice from generating notifications and
 	 * scheduling work.
 	 * It is shutdown this way in order to mitigate a race with
 	 * cx23885_input_rx_work_handler() in the overrun case, which could
 	 * re-enable the subdevice.
 	 */
 	atomic_set(&dev->ir_input_stopping, 1);
 	v4l2_subdev_call(dev->sd_ir, ir, rx_g_parameters, &params);
 	while (params.shutdown == false) {
 		params.enable = false;
 		params.interrupt_enable = false;
 		params.shutdown = true;
 		v4l2_subdev_call(dev->sd_ir, ir, rx_s_parameters, &params);
 		v4l2_subdev_call(dev->sd_ir, ir, rx_g_parameters, &params);
 	}

 	flush_scheduled_work();

 	switch (dev->board) {
 	case CX23885_BOARD_HAUPPAUGE_HVR1850:
 	case CX23885_BOARD_HAUPPAUGE_HVR1290:
 		del_timer_sync(&ir_input->timer_keyup);
 		break;
 	}
 }

 int cx23885_input_init(struct cx23885_dev *dev)
 {
 	struct card_ir *ir;
 	struct input_dev *input_dev;
 	char *ir_codes = NULL;
 	int ir_type, ir_addr, ir_start;
 	int ret;

 	/*
 	 * If the IR device (hardware registers, chip, GPIO lines, etc.) isn't
 	 * encapsulated in a v4l2_subdev, then I'm not going to deal with it.
 	 */
 	if (dev->sd_ir == NULL)
 		return -ENODEV;

 	switch (dev->board) {
 	case CX23885_BOARD_HAUPPAUGE_HVR1850:
 	case CX23885_BOARD_HAUPPAUGE_HVR1290:
 		/* Parameters for the grey Hauppauge remote for the HVR-1850 */
 		ir_codes = RC_MAP_HAUPPAUGE_NEW;
 		ir_type = IR_TYPE_RC5;
 		ir_addr = 0x1e; /* RC-5 system bits emitted by the remote */
 		ir_start = RC5_START_BITS_NORMAL; /* A basic RC-5 remote */
 		break;
 	}
 	if (ir_codes == NULL)
 		return -ENODEV;

 	ir = kzalloc(sizeof(*ir), GFP_KERNEL);
 	input_dev = input_allocate_device();
 	if (!ir || !input_dev) {
 		ret = -ENOMEM;
 		goto err_out_free;
 	}

 	ir->dev = input_dev;
 	ir->addr = ir_addr;
 	ir->start = ir_start;

 	/* init input device */
 	snprintf(ir->name, sizeof(ir->name), "cx23885 IR (%s)",
 		 cx23885_boards[dev->board].name);
 	snprintf(ir->phys, sizeof(ir->phys), "pci-%s/ir0", pci_name(dev->pci));

 	ret = ir_input_init(input_dev, &ir->ir, ir_type);
 	if (ret < 0)
 		goto err_out_free;

 	input_dev->name = ir->name;
 	input_dev->phys = ir->phys;
 	input_dev->id.bustype = BUS_PCI;
 	input_dev->id.version = 1;
 	if (dev->pci->subsystem_vendor) {
 		input_dev->id.vendor  = dev->pci->subsystem_vendor;
 		input_dev->id.product = dev->pci->subsystem_device;
 	} else {
 		input_dev->id.vendor  = dev->pci->vendor;
 		input_dev->id.product = dev->pci->device;
 	}
 	input_dev->dev.parent = &dev->pci->dev;

 	dev->ir_input = ir;
 	cx23885_input_ir_start(dev);

 	ret = ir_input_register(ir->dev, ir_codes, NULL, MODULE_NAME);
 	if (ret)
 		goto err_out_stop;

 	return 0;

 err_out_stop:
 	cx23885_input_ir_stop(dev);
 	dev->ir_input = NULL;
 err_out_free:
 	kfree(ir);
 	return ret;
 }

 void cx23885_input_fini(struct cx23885_dev *dev)
 {
 	/* Always stop the IR hardware from generating interrupts */
 	cx23885_input_ir_stop(dev);

 	if (dev->ir_input == NULL)
 		return;
 	ir_input_unregister(dev->ir_input->dev);
 	kfree(dev->ir_input);
 	dev->ir_input = NULL;
 }
	/*
	* Driver for the Conexant CX23885/7/8 PCIe bridge
	*
	* Infrared remote control input device
	*
	* Most of this file is
	*
	* Copyright (C) 2009 Andy Walls <awalls@md.metrocast.net>
	*
	* However, the cx23885_input_{init,fini} functions contained herein are
	* derived from Linux kernel files linux/media/video/.../...-input.c marked as:
	*
	* Copyright (C) 2008 <srinivasa.deevi at conexant dot com>
	* Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it>
	* Markus Rechberger <mrechberger@gmail.com>
	* Mauro Carvalho Chehab <mchehab@infradead.org>
	* Sascha Sommer <saschasommer@freenet.de>
	* Copyright (C) 2004, 2005 Chris Pascoe
	* Copyright (C) 2003, 2004 Gerd Knorr
	* Copyright (C) 2003 Pavel Machek
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License
	* as published by the Free Software Foundation; either version 2
	* of the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
	* 02110-1301, USA.
	*/

	#include <linux/input.h>
	#include <linux/slab.h>
	#include <media/ir-common.h>
	#include <media/v4l2-subdev.h>

	#include "cx23885.h"

	#define RC5_BITS 14
	#define RC5_HALF_BITS (2*RC5_BITS)
	#define RC5_HALF_BITS_MASK ((1 << RC5_HALF_BITS) - 1)

	#define RC5_START_BITS_NORMAL 0x3 /* Command range 0 - 63 */
	#define RC5_START_BITS_EXTENDED 0x2 /* Command range 64 - 127 */

	#define RC5_EXTENDED_COMMAND_OFFSET 64

	#define MODULE_NAME "cx23885"

	static inline unsigned int rc5_command(u32 rc5_baseband)
	{
	return RC5_INSTR(rc5_baseband) +
	((RC5_START(rc5_baseband) == RC5_START_BITS_EXTENDED)
	? RC5_EXTENDED_COMMAND_OFFSET : 0);
	}

	static void cx23885_input_process_raw_rc5(struct cx23885_dev *dev)
	{
	struct card_ir *ir_input = dev->ir_input;
	unsigned int code, command;
	u32 rc5;

	/* Ignore codes that are too short to be valid RC-5 */
	if (ir_input->last_bit < (RC5_HALF_BITS - 1))
	return;

	/* The library has the manchester coding backwards; XOR to adapt. */
	code = (ir_input->code & RC5_HALF_BITS_MASK) ^ RC5_HALF_BITS_MASK;
	rc5 = ir_rc5_decode(code);

	switch (RC5_START(rc5)) {
	case RC5_START_BITS_NORMAL:
	break;
	case RC5_START_BITS_EXTENDED:
	/* Don't allow if the remote only emits standard commands */
	if (ir_input->start == RC5_START_BITS_NORMAL)
	return;
	break;
	default:
	return;
	}

	if (ir_input->addr != RC5_ADDR(rc5))
	return;

	/* Don't generate a keypress for RC-5 auto-repeated keypresses */
	command = rc5_command(rc5);
	if (RC5_TOGGLE(rc5) != RC5_TOGGLE(ir_input->last_rc5) \|\|
	command != rc5_command(ir_input->last_rc5) \|\|
	/* Catch T == 0, CMD == 0 (e.g. '0') as first keypress after init */
	RC5_START(ir_input->last_rc5) == 0) {
	/* This keypress is differnet: not an auto repeat */
	ir_input_nokey(ir_input->dev, &ir_input->ir);
	ir_input_keydown(ir_input->dev, &ir_input->ir, command);
	}
	ir_input->last_rc5 = rc5;

	/* Schedule when we should do the key up event: ir_input_nokey() */
	mod_timer(&ir_input->timer_keyup,
	jiffies + msecs_to_jiffies(ir_input->rc5_key_timeout));
	}

	static void cx23885_input_next_pulse_width_rc5(struct cx23885_dev *dev,
	u32 ns_pulse)
	{
	const int rc5_quarterbit_ns = 444444; /* 32 cycles/36 kHz/2 = 444 us */
	struct card_ir *ir_input = dev->ir_input;
	int i, level, quarterbits, halfbits;

	if (!ir_input->active) {
	ir_input->active = 1;
	/* assume an initial space that we may not detect or measure */
	ir_input->code = 0;
	ir_input->last_bit = 0;
	}

	if (ns_pulse == V4L2_SUBDEV_IR_PULSE_RX_SEQ_END) {
	ir_input->last_bit++; /* Account for the final space */
	ir_input->active = 0;
	cx23885_input_process_raw_rc5(dev);
	return;
	}

	level = (ns_pulse & V4L2_SUBDEV_IR_PULSE_LEVEL_MASK) ? 1 : 0;

	/* Skip any leading space to sync to the start bit */
	if (ir_input->last_bit == 0 && level == 0)
	return;

	/*
	* With valid RC-5 we can get up to two consecutive half-bits in a
	* single pulse measurment. Experiments have shown that the duration
	* of a half-bit can vary. Make sure we always end up with an even
	* number of quarter bits at the same level (mark or space).
	*/
	ns_pulse &= V4L2_SUBDEV_IR_PULSE_MAX_WIDTH_NS;
	quarterbits = ns_pulse / rc5_quarterbit_ns;
	if (quarterbits & 1)
	quarterbits++;
	halfbits = quarterbits / 2;

	for (i = 0; i < halfbits; i++) {
	ir_input->last_bit++;
	ir_input->code \|= (level << ir_input->last_bit);

	if (ir_input->last_bit >= RC5_HALF_BITS-1) {
	ir_input->active = 0;
	cx23885_input_process_raw_rc5(dev);
	/*
	* If level is 1, a leading mark is invalid for RC5.
	* If level is 0, we scan past extra intial space.
	* Either way we don't want to reactivate collecting
	* marks or spaces here with any left over half-bits.
	*/
	break;
	}
	}
	}

	static void cx23885_input_process_pulse_widths_rc5(struct cx23885_dev *dev,
	bool add_eom)
	{
	struct card_ir *ir_input = dev->ir_input;
	struct ir_input_state *ir_input_state = &ir_input->ir;

	u32 ns_pulse[RC5_HALF_BITS+1];
	ssize_t num = 0;
	int count, i;

	do {
	v4l2_subdev_call(dev->sd_ir, ir, rx_read, (u8 *) ns_pulse,
	sizeof(ns_pulse), &num);

	count = num / sizeof(u32);

	/* Append an end of Rx seq, if the caller requested */
	if (add_eom && count < ARRAY_SIZE(ns_pulse)) {
	ns_pulse[count] = V4L2_SUBDEV_IR_PULSE_RX_SEQ_END;
	count++;
	}

	/* Just drain the Rx FIFO, if we're called, but not RC-5 */
	if (ir_input_state->ir_type != IR_TYPE_RC5)
	continue;

	for (i = 0; i < count; i++)
	cx23885_input_next_pulse_width_rc5(dev, ns_pulse[i]);
	} while (num != 0);
	}

	void cx23885_input_rx_work_handler(struct cx23885_dev *dev, u32 events)
	{
	struct v4l2_subdev_ir_parameters params;
	int overrun, data_available;

	if (dev->sd_ir == NULL \|\| events == 0)
	return;

	switch (dev->board) {
	case CX23885_BOARD_HAUPPAUGE_HVR1850:
	case CX23885_BOARD_HAUPPAUGE_HVR1290:
	/*
	* The only board we handle right now. However other boards
	* using the CX2388x integrated IR controller should be similar
	*/
	break;
	default:
	return;
	}

	overrun = events & (V4L2_SUBDEV_IR_RX_SW_FIFO_OVERRUN \|
	V4L2_SUBDEV_IR_RX_HW_FIFO_OVERRUN);

	data_available = events & (V4L2_SUBDEV_IR_RX_END_OF_RX_DETECTED \|
	V4L2_SUBDEV_IR_RX_FIFO_SERVICE_REQ);

	if (overrun) {
	/* If there was a FIFO overrun, stop the device */
	v4l2_subdev_call(dev->sd_ir, ir, rx_g_parameters, &params);
	params.enable = false;
	/* Mitigate race with cx23885_input_ir_stop() */
	params.shutdown = atomic_read(&dev->ir_input_stopping);
	v4l2_subdev_call(dev->sd_ir, ir, rx_s_parameters, &params);
	}

	if (data_available)
	cx23885_input_process_pulse_widths_rc5(dev, overrun);

	if (overrun) {
	/* If there was a FIFO overrun, clear & restart the device */
	params.enable = true;
	/* Mitigate race with cx23885_input_ir_stop() */
	params.shutdown = atomic_read(&dev->ir_input_stopping);
	v4l2_subdev_call(dev->sd_ir, ir, rx_s_parameters, &params);
	}
	}

	static void cx23885_input_ir_start(struct cx23885_dev *dev)
	{
	struct card_ir *ir_input = dev->ir_input;
	struct ir_input_state *ir_input_state = &ir_input->ir;
	struct v4l2_subdev_ir_parameters params;

	if (dev->sd_ir == NULL)
	return;

	atomic_set(&dev->ir_input_stopping, 0);

	/* keyup timer set up, if needed */
	switch (dev->board) {
	case CX23885_BOARD_HAUPPAUGE_HVR1850:
	case CX23885_BOARD_HAUPPAUGE_HVR1290:
	setup_timer(&ir_input->timer_keyup,
	ir_rc5_timer_keyup, /* Not actually RC-5 specific */
	(unsigned long) ir_input);
	if (ir_input_state->ir_type == IR_TYPE_RC5) {
	/*
	* RC-5 repeats a held key every
	* 64 bits * (2 * 32/36000) sec/bit = 113.778 ms
	*/
	ir_input->rc5_key_timeout = 115;
	}
	break;
	}

	v4l2_subdev_call(dev->sd_ir, ir, rx_g_parameters, &params);
	switch (dev->board) {
	case CX23885_BOARD_HAUPPAUGE_HVR1850:
	case CX23885_BOARD_HAUPPAUGE_HVR1290:
	/*
	* The IR controller on this board only returns pulse widths.
	* Any other mode setting will fail to set up the device.
	*/
	params.mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH;
	params.enable = true;
	params.interrupt_enable = true;
	params.shutdown = false;

	/* Setup for baseband compatible with both RC-5 and RC-6A */
	params.modulation = false;
	/* RC-5: 2,222,222 ns = 1/36 kHz * 32 cycles * 2 marks * 1.25*/
	/* RC-6A: 3,333,333 ns = 1/36 kHz * 16 cycles * 6 marks * 1.25*/
	params.max_pulse_width = 3333333; /* ns */
	/* RC-5: 666,667 ns = 1/36 kHz * 32 cycles * 1 mark * 0.75 */
	/* RC-6A: 333,333 ns = 1/36 kHz * 16 cycles * 1 mark * 0.75 */
	params.noise_filter_min_width = 333333; /* ns */
	/*
	* This board has inverted receive sense:
	* mark is received as low logic level;
	* falling edges are detected as rising edges; etc.
	*/
	params.invert = true;
	break;
	}
	v4l2_subdev_call(dev->sd_ir, ir, rx_s_parameters, &params);
	}

	static void cx23885_input_ir_stop(struct cx23885_dev *dev)
	{
	struct card_ir *ir_input = dev->ir_input;
	struct v4l2_subdev_ir_parameters params;

	if (dev->sd_ir == NULL)
	return;

	/*
	* Stop the sd_ir subdevice from generating notifications and
	* scheduling work.
	* It is shutdown this way in order to mitigate a race with
	* cx23885_input_rx_work_handler() in the overrun case, which could
	* re-enable the subdevice.
	*/
	atomic_set(&dev->ir_input_stopping, 1);
	v4l2_subdev_call(dev->sd_ir, ir, rx_g_parameters, &params);
	while (params.shutdown == false) {
	params.enable = false;
	params.interrupt_enable = false;
	params.shutdown = true;
	v4l2_subdev_call(dev->sd_ir, ir, rx_s_parameters, &params);
	v4l2_subdev_call(dev->sd_ir, ir, rx_g_parameters, &params);
	}

	flush_scheduled_work();

	switch (dev->board) {
	case CX23885_BOARD_HAUPPAUGE_HVR1850:
	case CX23885_BOARD_HAUPPAUGE_HVR1290:
	del_timer_sync(&ir_input->timer_keyup);
	break;
	}
	}

	int cx23885_input_init(struct cx23885_dev *dev)
	{
	struct card_ir *ir;
	struct input_dev *input_dev;
	char *ir_codes = NULL;
	int ir_type, ir_addr, ir_start;
	int ret;

	/*
	* If the IR device (hardware registers, chip, GPIO lines, etc.) isn't
	* encapsulated in a v4l2_subdev, then I'm not going to deal with it.
	*/
	if (dev->sd_ir == NULL)
	return -ENODEV;

	switch (dev->board) {
	case CX23885_BOARD_HAUPPAUGE_HVR1850:
	case CX23885_BOARD_HAUPPAUGE_HVR1290:
	/* Parameters for the grey Hauppauge remote for the HVR-1850 */
	ir_codes = RC_MAP_HAUPPAUGE_NEW;
	ir_type = IR_TYPE_RC5;
	ir_addr = 0x1e; /* RC-5 system bits emitted by the remote */
	ir_start = RC5_START_BITS_NORMAL; /* A basic RC-5 remote */
	break;
	}
	if (ir_codes == NULL)
	return -ENODEV;

	ir = kzalloc(sizeof(*ir), GFP_KERNEL);
	input_dev = input_allocate_device();
	if (!ir \|\| !input_dev) {
	ret = -ENOMEM;
	goto err_out_free;
	}

	ir->dev = input_dev;
	ir->addr = ir_addr;
	ir->start = ir_start;

	/* init input device */
	snprintf(ir->name, sizeof(ir->name), "cx23885 IR (%s)",
	cx23885_boards[dev->board].name);
	snprintf(ir->phys, sizeof(ir->phys), "pci-%s/ir0", pci_name(dev->pci));

	ret = ir_input_init(input_dev, &ir->ir, ir_type);
	if (ret < 0)
	goto err_out_free;

	input_dev->name = ir->name;
	input_dev->phys = ir->phys;
	input_dev->id.bustype = BUS_PCI;
	input_dev->id.version = 1;
	if (dev->pci->subsystem_vendor) {
	input_dev->id.vendor = dev->pci->subsystem_vendor;
	input_dev->id.product = dev->pci->subsystem_device;
	} else {
	input_dev->id.vendor = dev->pci->vendor;
	input_dev->id.product = dev->pci->device;
	}
	input_dev->dev.parent = &dev->pci->dev;

	dev->ir_input = ir;
	cx23885_input_ir_start(dev);

	ret = ir_input_register(ir->dev, ir_codes, NULL, MODULE_NAME);
	if (ret)
	goto err_out_stop;

	return 0;

	err_out_stop:
	cx23885_input_ir_stop(dev);
	dev->ir_input = NULL;
	err_out_free:
	kfree(ir);
	return ret;
	}

	void cx23885_input_fini(struct cx23885_dev *dev)
	{
	/* Always stop the IR hardware from generating interrupts */
	cx23885_input_ir_stop(dev);

	if (dev->ir_input == NULL)
	return;
	ir_input_unregister(dev->ir_input->dev);
	kfree(dev->ir_input);
	dev->ir_input = NULL;
	}