| /* |
| * Device Tree Source for Netstal Maschinen HCU4 |
| * based on the IBM Walnut |
| * |
| * Copyright 2008 |
| * Niklaus Giger <niklaus.giger@member.fsf.org> |
| * |
| * Copyright 2007 IBM Corp. |
| * Josh Boyer <jwboyer@linux.vnet.ibm.com> |
| * |
| * This file is licensed under the terms of the GNU General Public |
| * License version 2. This program is licensed "as is" without |
| * any warranty of any kind, whether express or implied. |
| */ |
| |
| /dts-v1/; |
| |
| / { |
| #address-cells = <0x1>; |
| #size-cells = <0x1>; |
| model = "netstal,hcu4"; |
| compatible = "netstal,hcu4"; |
| dcr-parent = <0x1>; |
| |
| aliases { |
| ethernet0 = "/plb/opb/ethernet@ef600800"; |
| serial0 = "/plb/opb/serial@ef600300"; |
| }; |
| |
| cpus { |
| #address-cells = <0x1>; |
| #size-cells = <0x0>; |
| |
| cpu@0 { |
| device_type = "cpu"; |
| model = "PowerPC,405GPr"; |
| reg = <0x0>; |
| clock-frequency = <0>; /* Filled in by U-Boot */ |
| timebase-frequency = <0x0>; /* Filled in by U-Boot */ |
| i-cache-line-size = <0x20>; |
| d-cache-line-size = <0x20>; |
| i-cache-size = <0x4000>; |
| d-cache-size = <0x4000>; |
| dcr-controller; |
| dcr-access-method = "native"; |
| linux,phandle = <0x1>; |
| }; |
| }; |
| |
| memory { |
| device_type = "memory"; |
| reg = <0x0 0x0>; /* Filled in by U-Boot */ |
| }; |
| |
| UIC0: interrupt-controller { |
| compatible = "ibm,uic"; |
| interrupt-controller; |
| cell-index = <0x0>; |
| dcr-reg = <0xc0 0x9>; |
| #address-cells = <0x0>; |
| #size-cells = <0x0>; |
| #interrupt-cells = <0x2>; |
| linux,phandle = <0x2>; |
| }; |
| |
| plb { |
| compatible = "ibm,plb3"; |
| #address-cells = <0x1>; |
| #size-cells = <0x1>; |
| ranges; |
| clock-frequency = <0x0>; /* Filled in by U-Boot */ |
| |
| SDRAM0: memory-controller { |
| compatible = "ibm,sdram-405gp"; |
| dcr-reg = <0x10 0x2>; |
| }; |
| |
| MAL: mcmal { |
| compatible = "ibm,mcmal-405gp", "ibm,mcmal"; |
| dcr-reg = <0x180 0x62>; |
| num-tx-chans = <0x1>; |
| num-rx-chans = <0x1>; |
| interrupt-parent = <0x2>; |
| interrupts = <0xb 0x4 0xc 0x4 0xa 0x4 0xd 0x4 0xe 0x4>; |
| linux,phandle = <0x3>; |
| }; |
| |
| POB0: opb { |
| compatible = "ibm,opb-405gp", "ibm,opb"; |
| #address-cells = <0x1>; |
| #size-cells = <0x1>; |
| ranges = <0xef600000 0xef600000 0xa00000>; |
| dcr-reg = <0xa0 0x5>; |
| clock-frequency = <0x0>; /* Filled in by U-Boot */ |
| |
| UART0: serial@ef600300 { |
| device_type = "serial"; |
| compatible = "ns16550"; |
| reg = <0xef600300 0x8>; |
| virtual-reg = <0xef600300>; |
| clock-frequency = <0x0>;/* Filled in by U-Boot */ |
| current-speed = <0>; /* Filled in by U-Boot */ |
| interrupt-parent = <0x2>; |
| interrupts = <0x0 0x4>; |
| }; |
| |
| IIC: i2c@ef600500 { |
| compatible = "ibm,iic-405gp", "ibm,iic"; |
| reg = <0xef600500 0x11>; |
| interrupt-parent = <0x2>; |
| interrupts = <0x2 0x4>; |
| }; |
| |
| GPIO: gpio@ef600700 { |
| compatible = "ibm,gpio-405gp"; |
| reg = <0xef600700 0x20>; |
| }; |
| |
| EMAC: ethernet@ef600800 { |
| device_type = "network"; |
| compatible = "ibm,emac-405gp", "ibm,emac"; |
| interrupt-parent = <0x2>; |
| interrupts = <0xf 0x4 0x9 0x4>; |
| local-mac-address = [00 00 00 00 00 00]; |
| reg = <0xef600800 0x70>; |
| mal-device = <0x3>; |
| mal-tx-channel = <0x0>; |
| mal-rx-channel = <0x0>; |
| cell-index = <0x0>; |
| max-frame-size = <0x5dc>; |
| rx-fifo-size = <0x1000>; |
| tx-fifo-size = <0x800>; |
| phy-mode = "rmii"; |
| phy-map = <0x1>; |
| }; |
| }; |
| |
| EBC0: ebc { |
| compatible = "ibm,ebc-405gp", "ibm,ebc"; |
| dcr-reg = <0x12 0x2>; |
| #address-cells = <0x2>; |
| #size-cells = <0x1>; |
| clock-frequency = <0x0>; /* Filled in by U-Boot */ |
| |
| sram@0,0 { |
| reg = <0x0 0x0 0x80000>; |
| }; |
| |
| flash@0,80000 { |
| compatible = "jedec-flash"; |
| bank-width = <0x1>; |
| reg = <0x0 0x80000 0x80000>; |
| #address-cells = <0x1>; |
| #size-cells = <0x1>; |
| |
| partition@0 { |
| label = "OpenBIOS"; |
| reg = <0x0 0x80000>; |
| read-only; |
| }; |
| }; |
| }; |
| }; |
| |
| chosen { |
| linux,stdout-path = "/plb/opb/serial@ef600300"; |
| }; |
| }; |