blob: e8d0724ee4032a25f5fb5a4ab3035aed00bf59cc [file] [log] [blame]
/*******************************************************************************
*
* Module Name: utmisc - common utility procedures
*
******************************************************************************/
/*
* Copyright (C) 2000 - 2010, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#include <linux/module.h>
#include <acpi/acpi.h>
#include "accommon.h"
#include "acnamesp.h"
#define _COMPONENT ACPI_UTILITIES
ACPI_MODULE_NAME("utmisc")
/*
* Common suffix for messages
*/
#define ACPI_COMMON_MSG_SUFFIX \
acpi_os_printf(" (%8.8X/%s-%u)\n", ACPI_CA_VERSION, module_name, line_number)
/*******************************************************************************
*
* FUNCTION: acpi_ut_validate_exception
*
* PARAMETERS: Status - The acpi_status code to be formatted
*
* RETURN: A string containing the exception text. NULL if exception is
* not valid.
*
* DESCRIPTION: This function validates and translates an ACPI exception into
* an ASCII string.
*
******************************************************************************/
const char *acpi_ut_validate_exception(acpi_status status)
{
u32 sub_status;
const char *exception = NULL;
ACPI_FUNCTION_ENTRY();
/*
* Status is composed of two parts, a "type" and an actual code
*/
sub_status = (status & ~AE_CODE_MASK);
switch (status & AE_CODE_MASK) {
case AE_CODE_ENVIRONMENTAL:
if (sub_status <= AE_CODE_ENV_MAX) {
exception = acpi_gbl_exception_names_env[sub_status];
}
break;
case AE_CODE_PROGRAMMER:
if (sub_status <= AE_CODE_PGM_MAX) {
exception = acpi_gbl_exception_names_pgm[sub_status];
}
break;
case AE_CODE_ACPI_TABLES:
if (sub_status <= AE_CODE_TBL_MAX) {
exception = acpi_gbl_exception_names_tbl[sub_status];
}
break;
case AE_CODE_AML:
if (sub_status <= AE_CODE_AML_MAX) {
exception = acpi_gbl_exception_names_aml[sub_status];
}
break;
case AE_CODE_CONTROL:
if (sub_status <= AE_CODE_CTRL_MAX) {
exception = acpi_gbl_exception_names_ctrl[sub_status];
}
break;
default:
break;
}
return (ACPI_CAST_PTR(const char, exception));
}
/*******************************************************************************
*
* FUNCTION: acpi_ut_is_pci_root_bridge
*
* PARAMETERS: Id - The HID/CID in string format
*
* RETURN: TRUE if the Id is a match for a PCI/PCI-Express Root Bridge
*
* DESCRIPTION: Determine if the input ID is a PCI Root Bridge ID.
*
******************************************************************************/
u8 acpi_ut_is_pci_root_bridge(char *id)
{
/*
* Check if this is a PCI root bridge.
* ACPI 3.0+: check for a PCI Express root also.
*/
if (!(ACPI_STRCMP(id,
PCI_ROOT_HID_STRING)) ||
!(ACPI_STRCMP(id, PCI_EXPRESS_ROOT_HID_STRING))) {
return (TRUE);
}
return (FALSE);
}
/*******************************************************************************
*
* FUNCTION: acpi_ut_is_aml_table
*
* PARAMETERS: Table - An ACPI table
*
* RETURN: TRUE if table contains executable AML; FALSE otherwise
*
* DESCRIPTION: Check ACPI Signature for a table that contains AML code.
* Currently, these are DSDT,SSDT,PSDT. All other table types are
* data tables that do not contain AML code.
*
******************************************************************************/
u8 acpi_ut_is_aml_table(struct acpi_table_header *table)
{
/* These are the only tables that contain executable AML */
if (ACPI_COMPARE_NAME(table->signature, ACPI_SIG_DSDT) ||
ACPI_COMPARE_NAME(table->signature, ACPI_SIG_PSDT) ||
ACPI_COMPARE_NAME(table->signature, ACPI_SIG_SSDT)) {
return (TRUE);
}
return (FALSE);
}
/*******************************************************************************
*
* FUNCTION: acpi_ut_allocate_owner_id
*
* PARAMETERS: owner_id - Where the new owner ID is returned
*
* RETURN: Status
*
* DESCRIPTION: Allocate a table or method owner ID. The owner ID is used to
* track objects created by the table or method, to be deleted
* when the method exits or the table is unloaded.
*
******************************************************************************/
acpi_status acpi_ut_allocate_owner_id(acpi_owner_id * owner_id)
{
u32 i;
u32 j;
u32 k;
acpi_status status;
ACPI_FUNCTION_TRACE(ut_allocate_owner_id);
/* Guard against multiple allocations of ID to the same location */
if (*owner_id) {
ACPI_ERROR((AE_INFO, "Owner ID [0x%2.2X] already exists",
*owner_id));
return_ACPI_STATUS(AE_ALREADY_EXISTS);
}
/* Mutex for the global ID mask */
status = acpi_ut_acquire_mutex(ACPI_MTX_CACHES);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
/*
* Find a free owner ID, cycle through all possible IDs on repeated
* allocations. (ACPI_NUM_OWNERID_MASKS + 1) because first index may have
* to be scanned twice.
*/
for (i = 0, j = acpi_gbl_last_owner_id_index;
i < (ACPI_NUM_OWNERID_MASKS + 1); i++, j++) {
if (j >= ACPI_NUM_OWNERID_MASKS) {
j = 0; /* Wraparound to start of mask array */
}
for (k = acpi_gbl_next_owner_id_offset; k < 32; k++) {
if (acpi_gbl_owner_id_mask[j] == ACPI_UINT32_MAX) {
/* There are no free IDs in this mask */
break;
}
if (!(acpi_gbl_owner_id_mask[j] & (1 << k))) {
/*
* Found a free ID. The actual ID is the bit index plus one,
* making zero an invalid Owner ID. Save this as the last ID
* allocated and update the global ID mask.
*/
acpi_gbl_owner_id_mask[j] |= (1 << k);
acpi_gbl_last_owner_id_index = (u8) j;
acpi_gbl_next_owner_id_offset = (u8) (k + 1);
/*
* Construct encoded ID from the index and bit position
*
* Note: Last [j].k (bit 255) is never used and is marked
* permanently allocated (prevents +1 overflow)
*/
*owner_id =
(acpi_owner_id) ((k + 1) + ACPI_MUL_32(j));
ACPI_DEBUG_PRINT((ACPI_DB_VALUES,
"Allocated OwnerId: %2.2X\n",
(unsigned int)*owner_id));
goto exit;
}
}
acpi_gbl_next_owner_id_offset = 0;
}
/*
* All owner_ids have been allocated. This typically should
* not happen since the IDs are reused after deallocation. The IDs are
* allocated upon table load (one per table) and method execution, and
* they are released when a table is unloaded or a method completes
* execution.
*
* If this error happens, there may be very deep nesting of invoked control
* methods, or there may be a bug where the IDs are not released.
*/
status = AE_OWNER_ID_LIMIT;
ACPI_ERROR((AE_INFO,
"Could not allocate new OwnerId (255 max), AE_OWNER_ID_LIMIT"));
exit:
(void)acpi_ut_release_mutex(ACPI_MTX_CACHES);
return_ACPI_STATUS(status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ut_release_owner_id
*
* PARAMETERS: owner_id_ptr - Pointer to a previously allocated owner_iD
*
* RETURN: None. No error is returned because we are either exiting a
* control method or unloading a table. Either way, we would
* ignore any error anyway.
*
* DESCRIPTION: Release a table or method owner ID. Valid IDs are 1 - 255
*
******************************************************************************/
void acpi_ut_release_owner_id(acpi_owner_id * owner_id_ptr)
{
acpi_owner_id owner_id = *owner_id_ptr;
acpi_status status;
u32 index;
u32 bit;
ACPI_FUNCTION_TRACE_U32(ut_release_owner_id, owner_id);
/* Always clear the input owner_id (zero is an invalid ID) */
*owner_id_ptr = 0;
/* Zero is not a valid owner_iD */
if (owner_id == 0) {
ACPI_ERROR((AE_INFO, "Invalid OwnerId: 0x%2.2X", owner_id));
return_VOID;
}
/* Mutex for the global ID mask */
status = acpi_ut_acquire_mutex(ACPI_MTX_CACHES);
if (ACPI_FAILURE(status)) {
return_VOID;
}
/* Normalize the ID to zero */
owner_id--;
/* Decode ID to index/offset pair */
index = ACPI_DIV_32(owner_id);
bit = 1 << ACPI_MOD_32(owner_id);
/* Free the owner ID only if it is valid */
if (acpi_gbl_owner_id_mask[index] & bit) {
acpi_gbl_owner_id_mask[index] ^= bit;
} else {
ACPI_ERROR((AE_INFO,
"Release of non-allocated OwnerId: 0x%2.2X",
owner_id + 1));
}
(void)acpi_ut_release_mutex(ACPI_MTX_CACHES);
return_VOID;
}
/*******************************************************************************
*
* FUNCTION: acpi_ut_strupr (strupr)
*
* PARAMETERS: src_string - The source string to convert
*
* RETURN: None
*
* DESCRIPTION: Convert string to uppercase
*
* NOTE: This is not a POSIX function, so it appears here, not in utclib.c
*
******************************************************************************/
void acpi_ut_strupr(char *src_string)
{
char *string;
ACPI_FUNCTION_ENTRY();
if (!src_string) {
return;
}
/* Walk entire string, uppercasing the letters */
for (string = src_string; *string; string++) {
*string = (char)ACPI_TOUPPER(*string);
}
return;
}
/*******************************************************************************
*
* FUNCTION: acpi_ut_print_string
*
* PARAMETERS: String - Null terminated ASCII string
* max_length - Maximum output length
*
* RETURN: None
*
* DESCRIPTION: Dump an ASCII string with support for ACPI-defined escape
* sequences.
*
******************************************************************************/
void acpi_ut_print_string(char *string, u8 max_length)
{
u32 i;
if (!string) {
acpi_os_printf("<\"NULL STRING PTR\">");
return;
}
acpi_os_printf("\"");
for (i = 0; string[i] && (i < max_length); i++) {
/* Escape sequences */
switch (string[i]) {
case 0x07:
acpi_os_printf("\\a"); /* BELL */
break;
case 0x08:
acpi_os_printf("\\b"); /* BACKSPACE */
break;
case 0x0C:
acpi_os_printf("\\f"); /* FORMFEED */
break;
case 0x0A:
acpi_os_printf("\\n"); /* LINEFEED */
break;
case 0x0D:
acpi_os_printf("\\r"); /* CARRIAGE RETURN */
break;
case 0x09:
acpi_os_printf("\\t"); /* HORIZONTAL TAB */
break;
case 0x0B:
acpi_os_printf("\\v"); /* VERTICAL TAB */
break;
case '\'': /* Single Quote */
case '\"': /* Double Quote */
case '\\': /* Backslash */
acpi_os_printf("\\%c", (int)string[i]);
break;
default:
/* Check for printable character or hex escape */
if (ACPI_IS_PRINT(string[i])) {
/* This is a normal character */
acpi_os_printf("%c", (int)string[i]);
} else {
/* All others will be Hex escapes */
acpi_os_printf("\\x%2.2X", (s32) string[i]);
}
break;
}
}
acpi_os_printf("\"");
if (i == max_length && string[i]) {
acpi_os_printf("...");
}
}
/*******************************************************************************
*
* FUNCTION: acpi_ut_dword_byte_swap
*
* PARAMETERS: Value - Value to be converted
*
* RETURN: u32 integer with bytes swapped
*
* DESCRIPTION: Convert a 32-bit value to big-endian (swap the bytes)
*
******************************************************************************/
u32 acpi_ut_dword_byte_swap(u32 value)
{
union {
u32 value;
u8 bytes[4];
} out;
union {
u32 value;
u8 bytes[4];
} in;
ACPI_FUNCTION_ENTRY();
in.value = value;
out.bytes[0] = in.bytes[3];
out.bytes[1] = in.bytes[2];
out.bytes[2] = in.bytes[1];
out.bytes[3] = in.bytes[0];
return (out.value);
}
/*******************************************************************************
*
* FUNCTION: acpi_ut_set_integer_width
*
* PARAMETERS: Revision From DSDT header
*
* RETURN: None
*
* DESCRIPTION: Set the global integer bit width based upon the revision
* of the DSDT. For Revision 1 and 0, Integers are 32 bits.
* For Revision 2 and above, Integers are 64 bits. Yes, this
* makes a difference.
*
******************************************************************************/
void acpi_ut_set_integer_width(u8 revision)
{
if (revision < 2) {
/* 32-bit case */
acpi_gbl_integer_bit_width = 32;
acpi_gbl_integer_nybble_width = 8;
acpi_gbl_integer_byte_width = 4;
} else {
/* 64-bit case (ACPI 2.0+) */
acpi_gbl_integer_bit_width = 64;
acpi_gbl_integer_nybble_width = 16;
acpi_gbl_integer_byte_width = 8;
}
}
#ifdef ACPI_DEBUG_OUTPUT
/*******************************************************************************
*
* FUNCTION: acpi_ut_display_init_pathname
*
* PARAMETERS: Type - Object type of the node
* obj_handle - Handle whose pathname will be displayed
* Path - Additional path string to be appended.
* (NULL if no extra path)
*
* RETURN: acpi_status
*
* DESCRIPTION: Display full pathname of an object, DEBUG ONLY
*
******************************************************************************/
void
acpi_ut_display_init_pathname(u8 type,
struct acpi_namespace_node *obj_handle,
char *path)
{
acpi_status status;
struct acpi_buffer buffer;
ACPI_FUNCTION_ENTRY();
/* Only print the path if the appropriate debug level is enabled */
if (!(acpi_dbg_level & ACPI_LV_INIT_NAMES)) {
return;
}
/* Get the full pathname to the node */
buffer.length = ACPI_ALLOCATE_LOCAL_BUFFER;
status = acpi_ns_handle_to_pathname(obj_handle, &buffer);
if (ACPI_FAILURE(status)) {
return;
}
/* Print what we're doing */
switch (type) {
case ACPI_TYPE_METHOD:
acpi_os_printf("Executing ");
break;
default:
acpi_os_printf("Initializing ");
break;
}
/* Print the object type and pathname */
acpi_os_printf("%-12s %s",
acpi_ut_get_type_name(type), (char *)buffer.pointer);
/* Extra path is used to append names like _STA, _INI, etc. */
if (path) {
acpi_os_printf(".%s", path);
}
acpi_os_printf("\n");
ACPI_FREE(buffer.pointer);
}
#endif
/*******************************************************************************
*
* FUNCTION: acpi_ut_valid_acpi_char
*
* PARAMETERS: Char - The character to be examined
* Position - Byte position (0-3)
*
* RETURN: TRUE if the character is valid, FALSE otherwise
*
* DESCRIPTION: Check for a valid ACPI character. Must be one of:
* 1) Upper case alpha
* 2) numeric
* 3) underscore
*
* We allow a '!' as the last character because of the ASF! table
*
******************************************************************************/
u8 acpi_ut_valid_acpi_char(char character, u32 position)
{
if (!((character >= 'A' && character <= 'Z') ||
(character >= '0' && character <= '9') || (character == '_'))) {
/* Allow a '!' in the last position */
if (character == '!' && position == 3) {
return (TRUE);
}
return (FALSE);
}
return (TRUE);
}
/*******************************************************************************
*
* FUNCTION: acpi_ut_valid_acpi_name
*
* PARAMETERS: Name - The name to be examined
*
* RETURN: TRUE if the name is valid, FALSE otherwise
*
* DESCRIPTION: Check for a valid ACPI name. Each character must be one of:
* 1) Upper case alpha
* 2) numeric
* 3) underscore
*
******************************************************************************/
u8 acpi_ut_valid_acpi_name(u32 name)
{
u32 i;
ACPI_FUNCTION_ENTRY();
for (i = 0; i < ACPI_NAME_SIZE; i++) {
if (!acpi_ut_valid_acpi_char
((ACPI_CAST_PTR(char, &name))[i], i)) {
return (FALSE);
}
}
return (TRUE);
}
/*******************************************************************************
*
* FUNCTION: acpi_ut_repair_name
*
* PARAMETERS: Name - The ACPI name to be repaired
*
* RETURN: Repaired version of the name
*
* DESCRIPTION: Repair an ACPI name: Change invalid characters to '*' and
* return the new name.
*
******************************************************************************/
acpi_name acpi_ut_repair_name(char *name)
{
u32 i;
char new_name[ACPI_NAME_SIZE];
for (i = 0; i < ACPI_NAME_SIZE; i++) {
new_name[i] = name[i];
/*
* Replace a bad character with something printable, yet technically
* still invalid. This prevents any collisions with existing "good"
* names in the namespace.
*/
if (!acpi_ut_valid_acpi_char(name[i], i)) {
new_name[i] = '*';
}
}
return (*(u32 *) new_name);
}
/*******************************************************************************
*
* FUNCTION: acpi_ut_strtoul64
*
* PARAMETERS: String - Null terminated string
* Base - Radix of the string: 16 or ACPI_ANY_BASE;
* ACPI_ANY_BASE means 'in behalf of to_integer'
* ret_integer - Where the converted integer is returned
*
* RETURN: Status and Converted value
*
* DESCRIPTION: Convert a string into an unsigned value. Performs either a
* 32-bit or 64-bit conversion, depending on the current mode
* of the interpreter.
* NOTE: Does not support Octal strings, not needed.
*
******************************************************************************/
acpi_status acpi_ut_strtoul64(char *string, u32 base, u64 * ret_integer)
{
u32 this_digit = 0;
u64 return_value = 0;
u64 quotient;
u64 dividend;
u32 to_integer_op = (base == ACPI_ANY_BASE);
u32 mode32 = (acpi_gbl_integer_byte_width == 4);
u8 valid_digits = 0;
u8 sign_of0x = 0;
u8 term = 0;
ACPI_FUNCTION_TRACE_STR(ut_stroul64, string);
switch (base) {
case ACPI_ANY_BASE:
case 16:
break;
default:
/* Invalid Base */
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
if (!string) {
goto error_exit;
}
/* Skip over any white space in the buffer */
while ((*string) && (ACPI_IS_SPACE(*string) || *string == '\t')) {
string++;
}
if (to_integer_op) {
/*
* Base equal to ACPI_ANY_BASE means 'to_integer operation case'.
* We need to determine if it is decimal or hexadecimal.
*/
if ((*string == '0') && (ACPI_TOLOWER(*(string + 1)) == 'x')) {
sign_of0x = 1;
base = 16;
/* Skip over the leading '0x' */
string += 2;
} else {
base = 10;
}
}
/* Any string left? Check that '0x' is not followed by white space. */
if (!(*string) || ACPI_IS_SPACE(*string) || *string == '\t') {
if (to_integer_op) {
goto error_exit;
} else {
goto all_done;
}
}
/*
* Perform a 32-bit or 64-bit conversion, depending upon the current
* execution mode of the interpreter
*/
dividend = (mode32) ? ACPI_UINT32_MAX : ACPI_UINT64_MAX;
/* Main loop: convert the string to a 32- or 64-bit integer */
while (*string) {
if (ACPI_IS_DIGIT(*string)) {
/* Convert ASCII 0-9 to Decimal value */
this_digit = ((u8) * string) - '0';
} else if (base == 10) {
/* Digit is out of range; possible in to_integer case only */
term = 1;
} else {
this_digit = (u8) ACPI_TOUPPER(*string);
if (ACPI_IS_XDIGIT((char)this_digit)) {
/* Convert ASCII Hex char to value */
this_digit = this_digit - 'A' + 10;
} else {
term = 1;
}
}
if (term) {
if (to_integer_op) {
goto error_exit;
} else {
break;
}
} else if ((valid_digits == 0) && (this_digit == 0)
&& !sign_of0x) {
/* Skip zeros */
string++;
continue;
}
valid_digits++;
if (sign_of0x && ((valid_digits > 16)
|| ((valid_digits > 8) && mode32))) {
/*
* This is to_integer operation case.
* No any restrictions for string-to-integer conversion,
* see ACPI spec.
*/
goto error_exit;
}
/* Divide the digit into the correct position */
(void)acpi_ut_short_divide((dividend - (u64) this_digit),
base, &quotient, NULL);
if (return_value > quotient) {
if (to_integer_op) {
goto error_exit;
} else {
break;
}
}
return_value *= base;
return_value += this_digit;
string++;
}
/* All done, normal exit */
all_done:
ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Converted value: %8.8X%8.8X\n",
ACPI_FORMAT_UINT64(return_value)));
*ret_integer = return_value;
return_ACPI_STATUS(AE_OK);
error_exit:
/* Base was set/validated above */
if (base == 10) {
return_ACPI_STATUS(AE_BAD_DECIMAL_CONSTANT);
} else {
return_ACPI_STATUS(AE_BAD_HEX_CONSTANT);
}
}
/*******************************************************************************
*
* FUNCTION: acpi_ut_create_update_state_and_push
*
* PARAMETERS: Object - Object to be added to the new state
* Action - Increment/Decrement
* state_list - List the state will be added to
*
* RETURN: Status
*
* DESCRIPTION: Create a new state and push it
*
******************************************************************************/
acpi_status
acpi_ut_create_update_state_and_push(union acpi_operand_object *object,
u16 action,
union acpi_generic_state **state_list)
{
union acpi_generic_state *state;
ACPI_FUNCTION_ENTRY();
/* Ignore null objects; these are expected */
if (!object) {
return (AE_OK);
}
state = acpi_ut_create_update_state(object, action);
if (!state) {
return (AE_NO_MEMORY);
}
acpi_ut_push_generic_state(state_list, state);
return (AE_OK);
}
/*******************************************************************************
*
* FUNCTION: acpi_ut_walk_package_tree
*
* PARAMETERS: source_object - The package to walk
* target_object - Target object (if package is being copied)
* walk_callback - Called once for each package element
* Context - Passed to the callback function
*
* RETURN: Status
*
* DESCRIPTION: Walk through a package
*
******************************************************************************/
acpi_status
acpi_ut_walk_package_tree(union acpi_operand_object * source_object,
void *target_object,
acpi_pkg_callback walk_callback, void *context)
{
acpi_status status = AE_OK;
union acpi_generic_state *state_list = NULL;
union acpi_generic_state *state;
u32 this_index;
union acpi_operand_object *this_source_obj;
ACPI_FUNCTION_TRACE(ut_walk_package_tree);
state = acpi_ut_create_pkg_state(source_object, target_object, 0);
if (!state) {
return_ACPI_STATUS(AE_NO_MEMORY);
}
while (state) {
/* Get one element of the package */
this_index = state->pkg.index;
this_source_obj = (union acpi_operand_object *)
state->pkg.source_object->package.elements[this_index];
/*
* Check for:
* 1) An uninitialized package element. It is completely
* legal to declare a package and leave it uninitialized
* 2) Not an internal object - can be a namespace node instead
* 3) Any type other than a package. Packages are handled in else
* case below.
*/
if ((!this_source_obj) ||
(ACPI_GET_DESCRIPTOR_TYPE(this_source_obj) !=
ACPI_DESC_TYPE_OPERAND)
|| (this_source_obj->common.type != ACPI_TYPE_PACKAGE)) {
status =
walk_callback(ACPI_COPY_TYPE_SIMPLE,
this_source_obj, state, context);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
state->pkg.index++;
while (state->pkg.index >=
state->pkg.source_object->package.count) {
/*
* We've handled all of the objects at this level, This means
* that we have just completed a package. That package may
* have contained one or more packages itself.
*
* Delete this state and pop the previous state (package).
*/
acpi_ut_delete_generic_state(state);
state = acpi_ut_pop_generic_state(&state_list);
/* Finished when there are no more states */
if (!state) {
/*
* We have handled all of the objects in the top level
* package just add the length of the package objects
* and exit
*/
return_ACPI_STATUS(AE_OK);
}
/*
* Go back up a level and move the index past the just
* completed package object.
*/
state->pkg.index++;
}
} else {
/* This is a subobject of type package */
status =
walk_callback(ACPI_COPY_TYPE_PACKAGE,
this_source_obj, state, context);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
/*
* Push the current state and create a new one
* The callback above returned a new target package object.
*/
acpi_ut_push_generic_state(&state_list, state);
state = acpi_ut_create_pkg_state(this_source_obj,
state->pkg.
this_target_obj, 0);
if (!state) {
/* Free any stacked Update State objects */
while (state_list) {
state =
acpi_ut_pop_generic_state
(&state_list);
acpi_ut_delete_generic_state(state);
}
return_ACPI_STATUS(AE_NO_MEMORY);
}
}
}
/* We should never get here */
return_ACPI_STATUS(AE_AML_INTERNAL);
}
/*******************************************************************************
*
* FUNCTION: acpi_error, acpi_exception, acpi_warning, acpi_info
*
* PARAMETERS: module_name - Caller's module name (for error output)
* line_number - Caller's line number (for error output)
* Format - Printf format string + additional args
*
* RETURN: None
*
* DESCRIPTION: Print message with module/line/version info
*
******************************************************************************/
void ACPI_INTERNAL_VAR_XFACE
acpi_error(const char *module_name, u32 line_number, const char *format, ...)
{
va_list args;
acpi_os_printf("ACPI Error: ");
va_start(args, format);
acpi_os_vprintf(format, args);
ACPI_COMMON_MSG_SUFFIX;
va_end(args);
}
void ACPI_INTERNAL_VAR_XFACE
acpi_exception(const char *module_name,
u32 line_number, acpi_status status, const char *format, ...)
{
va_list args;
acpi_os_printf("ACPI Exception: %s, ", acpi_format_exception(status));
va_start(args, format);
acpi_os_vprintf(format, args);
ACPI_COMMON_MSG_SUFFIX;
va_end(args);
}
void ACPI_INTERNAL_VAR_XFACE
acpi_warning(const char *module_name, u32 line_number, const char *format, ...)
{
va_list args;
acpi_os_printf("ACPI Warning: ");
va_start(args, format);
acpi_os_vprintf(format, args);
ACPI_COMMON_MSG_SUFFIX;
va_end(args);
}
void ACPI_INTERNAL_VAR_XFACE
acpi_info(const char *module_name, u32 line_number, const char *format, ...)
{
va_list args;
acpi_os_printf("ACPI: ");
va_start(args, format);
acpi_os_vprintf(format, args);
acpi_os_printf("\n");
va_end(args);
}
ACPI_EXPORT_SYMBOL(acpi_error)
ACPI_EXPORT_SYMBOL(acpi_exception)
ACPI_EXPORT_SYMBOL(acpi_warning)
ACPI_EXPORT_SYMBOL(acpi_info)
/*******************************************************************************
*
* FUNCTION: acpi_ut_predefined_warning
*
* PARAMETERS: module_name - Caller's module name (for error output)
* line_number - Caller's line number (for error output)
* Pathname - Full pathname to the node
* node_flags - From Namespace node for the method/object
* Format - Printf format string + additional args
*
* RETURN: None
*
* DESCRIPTION: Warnings for the predefined validation module. Messages are
* only emitted the first time a problem with a particular
* method/object is detected. This prevents a flood of error
* messages for methods that are repeatedly evaluated.
*
******************************************************************************/
void ACPI_INTERNAL_VAR_XFACE
acpi_ut_predefined_warning(const char *module_name,
u32 line_number,
char *pathname,
u8 node_flags, const char *format, ...)
{
va_list args;
/*
* Warning messages for this method/object will be disabled after the
* first time a validation fails or an object is successfully repaired.
*/
if (node_flags & ANOBJ_EVALUATED) {
return;
}
acpi_os_printf("ACPI Warning for %s: ", pathname);
va_start(args, format);
acpi_os_vprintf(format, args);
ACPI_COMMON_MSG_SUFFIX;
va_end(args);
}
/*******************************************************************************
*
* FUNCTION: acpi_ut_predefined_info
*
* PARAMETERS: module_name - Caller's module name (for error output)
* line_number - Caller's line number (for error output)
* Pathname - Full pathname to the node
* node_flags - From Namespace node for the method/object
* Format - Printf format string + additional args
*
* RETURN: None
*
* DESCRIPTION: Info messages for the predefined validation module. Messages
* are only emitted the first time a problem with a particular
* method/object is detected. This prevents a flood of
* messages for methods that are repeatedly evaluated.
*
******************************************************************************/
void ACPI_INTERNAL_VAR_XFACE
acpi_ut_predefined_info(const char *module_name,
u32 line_number,
char *pathname, u8 node_flags, const char *format, ...)
{
va_list args;
/*
* Warning messages for this method/object will be disabled after the
* first time a validation fails or an object is successfully repaired.
*/
if (node_flags & ANOBJ_EVALUATED) {
return;
}
acpi_os_printf("ACPI Info for %s: ", pathname);
va_start(args, format);
acpi_os_vprintf(format, args);
ACPI_COMMON_MSG_SUFFIX;
va_end(args);
}