| if ARCH_SA1100 |
| |
| menu "SA11x0 Implementations" |
| |
| config SA1100_ASSABET |
| bool "Assabet" |
| select ARM_SA1110_CPUFREQ |
| help |
| Say Y here if you are using the Intel(R) StrongARM(R) SA-1110 |
| Microprocessor Development Board (also known as the Assabet). |
| |
| config ASSABET_NEPONSET |
| bool "Include support for Neponset" |
| depends on SA1100_ASSABET |
| select SA1111 |
| help |
| Say Y here if you are using the Intel(R) StrongARM(R) SA-1110 |
| Microprocessor Development Board (Assabet) with the SA-1111 |
| Development Board (Nepon). |
| |
| config SA1100_CERF |
| bool "CerfBoard" |
| select ARM_SA1110_CPUFREQ |
| help |
| The Intrinsyc CerfBoard is based on the StrongARM 1110 (Discontinued). |
| More information is available at: |
| <http://www.intrinsyc.com/products/cerfboard/>. |
| |
| Say Y if configuring for an Intrinsyc CerfBoard. |
| Say N otherwise. |
| |
| choice |
| prompt "Cerf Flash available" |
| depends on SA1100_CERF |
| default SA1100_CERF_FLASH_8MB |
| |
| config SA1100_CERF_FLASH_8MB |
| bool "8MB" |
| |
| config SA1100_CERF_FLASH_16MB |
| bool "16MB" |
| |
| config SA1100_CERF_FLASH_32MB |
| bool "32MB" |
| |
| endchoice |
| |
| config SA1100_COLLIE |
| bool "Sharp Zaurus SL5500" |
| # FIXME: select ARM_SA11x0_CPUFREQ |
| select SHARP_LOCOMO |
| select SHARP_PARAM |
| select SHARP_SCOOP |
| help |
| Say Y here to support the Sharp Zaurus SL5500 PDAs. |
| |
| config SA1100_H3100 |
| bool "Compaq iPAQ H3100" |
| select ARM_SA1110_CPUFREQ |
| select HTC_EGPIO |
| select MFD_IPAQ_MICRO |
| help |
| Say Y here if you intend to run this kernel on the Compaq iPAQ |
| H3100 handheld computer. |
| |
| config SA1100_H3600 |
| bool "Compaq iPAQ H3600/H3700" |
| select ARM_SA1110_CPUFREQ |
| select HTC_EGPIO |
| select MFD_IPAQ_MICRO |
| help |
| Say Y here if you intend to run this kernel on the Compaq iPAQ |
| H3600 and H3700 handheld computers. |
| |
| config SA1100_BADGE4 |
| bool "HP Labs BadgePAD 4" |
| select ARM_SA1100_CPUFREQ |
| select SA1111 |
| help |
| Say Y here if you want to build a kernel for the HP Laboratories |
| BadgePAD 4. |
| |
| config SA1100_JORNADA720 |
| bool "HP Jornada 720" |
| # FIXME: select ARM_SA11x0_CPUFREQ |
| select SA1111 |
| help |
| Say Y here if you want to build a kernel for the HP Jornada 720 |
| handheld computer. See |
| <http://h10025.www1.hp.com/ewfrf/wc/product?product=61677&cc=us&lc=en&dlc=en&product=61677#> |
| |
| config SA1100_JORNADA720_SSP |
| bool "HP Jornada 720 Extended SSP driver" |
| depends on SA1100_JORNADA720 |
| select SA1100_SSP |
| help |
| Say Y here if you have a HP Jornada 7xx handheld computer and you |
| want to access devices connected to the MCU. Those include the |
| keyboard, touchscreen, backlight and battery. This driver also activates |
| the generic SSP which it extends. |
| |
| config SA1100_HACKKIT |
| bool "HackKit Core CPU Board" |
| select ARM_SA1100_CPUFREQ |
| help |
| Say Y here to support the HackKit Core CPU Board |
| <http://hackkit.eletztrick.de>; |
| |
| config SA1100_LART |
| bool "LART" |
| select ARM_SA1100_CPUFREQ |
| help |
| Say Y here if you are using the Linux Advanced Radio Terminal |
| (also known as the LART). See <http://www.lartmaker.nl/> for |
| information on the LART. |
| |
| config SA1100_NANOENGINE |
| bool "nanoEngine" |
| select ARM_SA1110_CPUFREQ |
| select PCI |
| select PCI_NANOENGINE |
| help |
| Say Y here if you are using the Bright Star Engineering nanoEngine. |
| See <http://www.brightstareng.com/arm/nanoeng.htm> for information |
| on the BSE nanoEngine. |
| |
| config SA1100_PLEB |
| bool "PLEB" |
| select ARM_SA1100_CPUFREQ |
| help |
| Say Y here if you are using version 1 of the Portable Linux |
| Embedded Board (also known as PLEB). |
| See <http://www.disy.cse.unsw.edu.au/Hardware/PLEB/> |
| for more information. |
| |
| config SA1100_SHANNON |
| bool "Shannon" |
| select ARM_SA1100_CPUFREQ |
| help |
| The Shannon (also known as a Tuxscreen, and also as a IS2630) was a |
| limited edition webphone produced by Philips. The Shannon is a SA1100 |
| platform with a 640x480 LCD, touchscreen, CIR keyboard, PCMCIA slots, |
| and a telco interface. |
| |
| config SA1100_SIMPAD |
| bool "Simpad" |
| select ARM_SA1110_CPUFREQ |
| help |
| The SIEMENS webpad SIMpad is based on the StrongARM 1110. There |
| are two different versions CL4 and SL4. CL4 has 32MB RAM and 16MB |
| FLASH. The SL4 version got 64 MB RAM and 32 MB FLASH and a |
| PCMCIA-Slot. The version for the Germany Telecom (DTAG) is the same |
| like CL4 in additional it has a PCMCIA-Slot. For more information |
| visit <http://www.usa.siemens.com/> or <http://www.siemens.ch/>. |
| |
| config SA1100_SSP |
| tristate "Generic PIO SSP" |
| help |
| Say Y here to enable support for the generic PIO SSP driver. |
| This isn't for audio support, but for attached sensors and |
| other devices, eg for BadgePAD 4 sensor support. |
| |
| endmenu |
| |
| endif |
| |
