| #ifndef _ASM_X86_MMU_CONTEXT_H |
| #define _ASM_X86_MMU_CONTEXT_H |
| |
| #include <asm/desc.h> |
| #include <linux/atomic.h> |
| #include <linux/mm_types.h> |
| |
| #include <trace/events/tlb.h> |
| |
| #include <asm/pgalloc.h> |
| #include <asm/tlbflush.h> |
| #include <asm/paravirt.h> |
| #include <asm/mpx.h> |
| #ifndef CONFIG_PARAVIRT |
| static inline void paravirt_activate_mm(struct mm_struct *prev, |
| struct mm_struct *next) |
| { |
| } |
| #endif /* !CONFIG_PARAVIRT */ |
| |
| #ifdef CONFIG_PERF_EVENTS |
| extern struct static_key rdpmc_always_available; |
| |
| static inline void load_mm_cr4(struct mm_struct *mm) |
| { |
| if (static_key_false(&rdpmc_always_available) || |
| atomic_read(&mm->context.perf_rdpmc_allowed)) |
| cr4_set_bits(X86_CR4_PCE); |
| else |
| cr4_clear_bits(X86_CR4_PCE); |
| } |
| #else |
| static inline void load_mm_cr4(struct mm_struct *mm) {} |
| #endif |
| |
| #ifdef CONFIG_MODIFY_LDT_SYSCALL |
| /* |
| * ldt_structs can be allocated, used, and freed, but they are never |
| * modified while live. |
| */ |
| struct ldt_struct { |
| /* |
| * Xen requires page-aligned LDTs with special permissions. This is |
| * needed to prevent us from installing evil descriptors such as |
| * call gates. On native, we could merge the ldt_struct and LDT |
| * allocations, but it's not worth trying to optimize. |
| */ |
| struct desc_struct *entries; |
| int size; |
| }; |
| |
| /* |
| * Used for LDT copy/destruction. |
| */ |
| int init_new_context_ldt(struct task_struct *tsk, struct mm_struct *mm); |
| void destroy_context_ldt(struct mm_struct *mm); |
| #else /* CONFIG_MODIFY_LDT_SYSCALL */ |
| static inline int init_new_context_ldt(struct task_struct *tsk, |
| struct mm_struct *mm) |
| { |
| return 0; |
| } |
| static inline void destroy_context_ldt(struct mm_struct *mm) {} |
| #endif |
| |
| static inline void load_mm_ldt(struct mm_struct *mm) |
| { |
| #ifdef CONFIG_MODIFY_LDT_SYSCALL |
| struct ldt_struct *ldt; |
| |
| /* lockless_dereference synchronizes with smp_store_release */ |
| ldt = lockless_dereference(mm->context.ldt); |
| |
| /* |
| * Any change to mm->context.ldt is followed by an IPI to all |
| * CPUs with the mm active. The LDT will not be freed until |
| * after the IPI is handled by all such CPUs. This means that, |
| * if the ldt_struct changes before we return, the values we see |
| * will be safe, and the new values will be loaded before we run |
| * any user code. |
| * |
| * NB: don't try to convert this to use RCU without extreme care. |
| * We would still need IRQs off, because we don't want to change |
| * the local LDT after an IPI loaded a newer value than the one |
| * that we can see. |
| */ |
| |
| if (unlikely(ldt)) |
| set_ldt(ldt->entries, ldt->size); |
| else |
| clear_LDT(); |
| #else |
| clear_LDT(); |
| #endif |
| |
| DEBUG_LOCKS_WARN_ON(preemptible()); |
| } |
| |
| static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) |
| { |
| #ifdef CONFIG_SMP |
| if (this_cpu_read(cpu_tlbstate.state) == TLBSTATE_OK) |
| this_cpu_write(cpu_tlbstate.state, TLBSTATE_LAZY); |
| #endif |
| } |
| |
| static inline int init_new_context(struct task_struct *tsk, |
| struct mm_struct *mm) |
| { |
| init_new_context_ldt(tsk, mm); |
| return 0; |
| } |
| static inline void destroy_context(struct mm_struct *mm) |
| { |
| destroy_context_ldt(mm); |
| } |
| |
| extern void switch_mm(struct mm_struct *prev, struct mm_struct *next, |
| struct task_struct *tsk); |
| |
| extern void switch_mm_irqs_off(struct mm_struct *prev, struct mm_struct *next, |
| struct task_struct *tsk); |
| #define switch_mm_irqs_off switch_mm_irqs_off |
| |
| #define activate_mm(prev, next) \ |
| do { \ |
| paravirt_activate_mm((prev), (next)); \ |
| switch_mm((prev), (next), NULL); \ |
| } while (0); |
| |
| #ifdef CONFIG_X86_32 |
| #define deactivate_mm(tsk, mm) \ |
| do { \ |
| lazy_load_gs(0); \ |
| } while (0) |
| #else |
| #define deactivate_mm(tsk, mm) \ |
| do { \ |
| load_gs_index(0); \ |
| loadsegment(fs, 0); \ |
| } while (0) |
| #endif |
| |
| static inline void arch_dup_mmap(struct mm_struct *oldmm, |
| struct mm_struct *mm) |
| { |
| paravirt_arch_dup_mmap(oldmm, mm); |
| } |
| |
| static inline void arch_exit_mmap(struct mm_struct *mm) |
| { |
| paravirt_arch_exit_mmap(mm); |
| } |
| |
| #ifdef CONFIG_X86_64 |
| static inline bool is_64bit_mm(struct mm_struct *mm) |
| { |
| return !config_enabled(CONFIG_IA32_EMULATION) || |
| !(mm->context.ia32_compat == TIF_IA32); |
| } |
| #else |
| static inline bool is_64bit_mm(struct mm_struct *mm) |
| { |
| return false; |
| } |
| #endif |
| |
| static inline void arch_bprm_mm_init(struct mm_struct *mm, |
| struct vm_area_struct *vma) |
| { |
| mpx_mm_init(mm); |
| } |
| |
| static inline void arch_unmap(struct mm_struct *mm, struct vm_area_struct *vma, |
| unsigned long start, unsigned long end) |
| { |
| /* |
| * mpx_notify_unmap() goes and reads a rarely-hot |
| * cacheline in the mm_struct. That can be expensive |
| * enough to be seen in profiles. |
| * |
| * The mpx_notify_unmap() call and its contents have been |
| * observed to affect munmap() performance on hardware |
| * where MPX is not present. |
| * |
| * The unlikely() optimizes for the fast case: no MPX |
| * in the CPU, or no MPX use in the process. Even if |
| * we get this wrong (in the unlikely event that MPX |
| * is widely enabled on some system) the overhead of |
| * MPX itself (reading bounds tables) is expected to |
| * overwhelm the overhead of getting this unlikely() |
| * consistently wrong. |
| */ |
| if (unlikely(cpu_feature_enabled(X86_FEATURE_MPX))) |
| mpx_notify_unmap(mm, vma, start, end); |
| } |
| |
| static inline int vma_pkey(struct vm_area_struct *vma) |
| { |
| u16 pkey = 0; |
| #ifdef CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS |
| unsigned long vma_pkey_mask = VM_PKEY_BIT0 | VM_PKEY_BIT1 | |
| VM_PKEY_BIT2 | VM_PKEY_BIT3; |
| pkey = (vma->vm_flags & vma_pkey_mask) >> VM_PKEY_SHIFT; |
| #endif |
| return pkey; |
| } |
| |
| static inline bool __pkru_allows_pkey(u16 pkey, bool write) |
| { |
| u32 pkru = read_pkru(); |
| |
| if (!__pkru_allows_read(pkru, pkey)) |
| return false; |
| if (write && !__pkru_allows_write(pkru, pkey)) |
| return false; |
| |
| return true; |
| } |
| |
| /* |
| * We only want to enforce protection keys on the current process |
| * because we effectively have no access to PKRU for other |
| * processes or any way to tell *which * PKRU in a threaded |
| * process we could use. |
| * |
| * So do not enforce things if the VMA is not from the current |
| * mm, or if we are in a kernel thread. |
| */ |
| static inline bool vma_is_foreign(struct vm_area_struct *vma) |
| { |
| if (!current->mm) |
| return true; |
| /* |
| * Should PKRU be enforced on the access to this VMA? If |
| * the VMA is from another process, then PKRU has no |
| * relevance and should not be enforced. |
| */ |
| if (current->mm != vma->vm_mm) |
| return true; |
| |
| return false; |
| } |
| |
| static inline bool arch_vma_access_permitted(struct vm_area_struct *vma, |
| bool write, bool execute, bool foreign) |
| { |
| /* pkeys never affect instruction fetches */ |
| if (execute) |
| return true; |
| /* allow access if the VMA is not one from this process */ |
| if (foreign || vma_is_foreign(vma)) |
| return true; |
| return __pkru_allows_pkey(vma_pkey(vma), write); |
| } |
| |
| static inline bool arch_pte_access_permitted(pte_t pte, bool write) |
| { |
| return __pkru_allows_pkey(pte_flags_pkey(pte_flags(pte)), write); |
| } |
| |
| #endif /* _ASM_X86_MMU_CONTEXT_H */ |