drivers/input/rmi4/rmi_f12.c - kernel/quantenna - Git at Google

 /*
  * Copyright (c) 2012-2016 Synaptics Incorporated
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License version 2 as published by
  * the Free Software Foundation.
  */
 #include <linux/input.h>
 #include <linux/input/mt.h>
 #include <linux/rmi.h>
 #include "rmi_driver.h"
 #include "rmi_2d_sensor.h"

 enum rmi_f12_object_type {
 	RMI_F12_OBJECT_NONE			= 0x00,
 	RMI_F12_OBJECT_FINGER			= 0x01,
 	RMI_F12_OBJECT_STYLUS			= 0x02,
 	RMI_F12_OBJECT_PALM			= 0x03,
 	RMI_F12_OBJECT_UNCLASSIFIED		= 0x04,
 	RMI_F12_OBJECT_GLOVED_FINGER		= 0x06,
 	RMI_F12_OBJECT_NARROW_OBJECT		= 0x07,
 	RMI_F12_OBJECT_HAND_EDGE		= 0x08,
 	RMI_F12_OBJECT_COVER			= 0x0A,
 	RMI_F12_OBJECT_STYLUS_2			= 0x0B,
 	RMI_F12_OBJECT_ERASER			= 0x0C,
 	RMI_F12_OBJECT_SMALL_OBJECT		= 0x0D,
 };

 struct f12_data {
 	struct rmi_function *fn;
 	struct rmi_2d_sensor sensor;
 	struct rmi_2d_sensor_platform_data sensor_pdata;

 	u16 data_addr;

 	struct rmi_register_descriptor query_reg_desc;
 	struct rmi_register_descriptor control_reg_desc;
 	struct rmi_register_descriptor data_reg_desc;

 	/* F12 Data1 describes sensed objects */
 	const struct rmi_register_desc_item *data1;
 	u16 data1_offset;

 	/* F12 Data5 describes finger ACM */
 	const struct rmi_register_desc_item *data5;
 	u16 data5_offset;

 	/* F12 Data5 describes Pen */
 	const struct rmi_register_desc_item *data6;
 	u16 data6_offset;


 	/* F12 Data9 reports relative data */
 	const struct rmi_register_desc_item *data9;
 	u16 data9_offset;

 	const struct rmi_register_desc_item *data15;
 	u16 data15_offset;
 };

 static int rmi_f12_read_sensor_tuning(struct f12_data *f12)
 {
 	const struct rmi_register_desc_item *item;
 	struct rmi_2d_sensor *sensor = &f12->sensor;
 	struct rmi_function *fn = sensor->fn;
 	struct rmi_device *rmi_dev = fn->rmi_dev;
 	int ret;
 	int offset;
 	u8 buf[15];
 	int pitch_x = 0;
 	int pitch_y = 0;
 	int clip_x_low = 0;
 	int clip_x_high = 0;
 	int clip_y_low = 0;
 	int clip_y_high = 0;
 	int rx_receivers = 0;
 	int tx_receivers = 0;
 	int sensor_flags = 0;

 	item = rmi_get_register_desc_item(&f12->control_reg_desc, 8);
 	if (!item) {
 		dev_err(&fn->dev,
 			"F12 does not have the sensor tuning control register\n");
 		return -ENODEV;
 	}

 	offset = rmi_register_desc_calc_reg_offset(&f12->control_reg_desc, 8);

 	if (item->reg_size > sizeof(buf)) {
 		dev_err(&fn->dev,
 			"F12 control8 should be no bigger than %zd bytes, not: %ld\n",
 			sizeof(buf), item->reg_size);
 		return -ENODEV;
 	}

 	ret = rmi_read_block(rmi_dev, fn->fd.control_base_addr + offset, buf,
 				item->reg_size);
 	if (ret)
 		return ret;

 	offset = 0;
 	if (rmi_register_desc_has_subpacket(item, 0)) {
 		sensor->max_x = (buf[offset + 1] << 8) | buf[offset];
 		sensor->max_y = (buf[offset + 3] << 8) | buf[offset + 2];
 		offset += 4;
 	}

 	rmi_dbg(RMI_DEBUG_FN, &fn->dev, "%s: max_x: %d max_y: %d\n", __func__,
 		sensor->max_x, sensor->max_y);

 	if (rmi_register_desc_has_subpacket(item, 1)) {
 		pitch_x = (buf[offset + 1] << 8) | buf[offset];
 		pitch_y	= (buf[offset + 3] << 8) | buf[offset + 2];
 		offset += 4;
 	}

 	if (rmi_register_desc_has_subpacket(item, 2)) {
 		sensor->axis_align.clip_x_low = buf[offset];
 		sensor->axis_align.clip_x_high = sensor->max_x
 							- buf[offset + 1];
 		sensor->axis_align.clip_y_low = buf[offset + 2];
 		sensor->axis_align.clip_y_high = sensor->max_y
 							- buf[offset + 3];
 		offset += 4;
 	}

 	rmi_dbg(RMI_DEBUG_FN, &fn->dev, "%s: x low: %d x high: %d y low: %d y high: %d\n",
 		__func__, clip_x_low, clip_x_high, clip_y_low, clip_y_high);

 	if (rmi_register_desc_has_subpacket(item, 3)) {
 		rx_receivers = buf[offset];
 		tx_receivers = buf[offset + 1];
 		offset += 2;
 	}

 	if (rmi_register_desc_has_subpacket(item, 4)) {
 		sensor_flags = buf[offset];
 		offset += 1;
 	}

 	sensor->x_mm = (pitch_x * rx_receivers) >> 12;
 	sensor->y_mm = (pitch_y * tx_receivers) >> 12;

 	rmi_dbg(RMI_DEBUG_FN, &fn->dev, "%s: x_mm: %d y_mm: %d\n", __func__,
 		sensor->x_mm, sensor->y_mm);

 	return 0;
 }

 static void rmi_f12_process_objects(struct f12_data *f12, u8 *data1)
 {
 	int i;
 	struct rmi_2d_sensor *sensor = &f12->sensor;

 	for (i = 0; i < f12->data1->num_subpackets; i++) {
 		struct rmi_2d_sensor_abs_object *obj = &sensor->objs[i];

 		obj->type = RMI_2D_OBJECT_NONE;
 		obj->mt_tool = MT_TOOL_FINGER;

 		switch (data1[0]) {
 		case RMI_F12_OBJECT_FINGER:
 			obj->type = RMI_2D_OBJECT_FINGER;
 			break;
 		case RMI_F12_OBJECT_STYLUS:
 			obj->type = RMI_2D_OBJECT_STYLUS;
 			obj->mt_tool = MT_TOOL_PEN;
 			break;
 		case RMI_F12_OBJECT_PALM:
 			obj->type = RMI_2D_OBJECT_PALM;
 			obj->mt_tool = MT_TOOL_PALM;
 			break;
 		case RMI_F12_OBJECT_UNCLASSIFIED:
 			obj->type = RMI_2D_OBJECT_UNCLASSIFIED;
 			break;
 		}

 		obj->x = (data1[2] << 8) | data1[1];
 		obj->y = (data1[4] << 8) | data1[3];
 		obj->z = data1[5];
 		obj->wx = data1[6];
 		obj->wy = data1[7];

 		rmi_2d_sensor_abs_process(sensor, obj, i);

 		data1 += 8;
 	}

 	if (sensor->kernel_tracking)
 		input_mt_assign_slots(sensor->input,
 				      sensor->tracking_slots,
 				      sensor->tracking_pos,
 				      sensor->nbr_fingers,
 				      sensor->dmax);

 	for (i = 0; i < sensor->nbr_fingers; i++)
 		rmi_2d_sensor_abs_report(sensor, &sensor->objs[i], i);
 }

 static int rmi_f12_attention(struct rmi_function *fn,
 			     unsigned long *irq_nr_regs)
 {
 	int retval;
 	struct rmi_device *rmi_dev = fn->rmi_dev;
 	struct f12_data *f12 = dev_get_drvdata(&fn->dev);
 	struct rmi_2d_sensor *sensor = &f12->sensor;

 	if (rmi_dev->xport->attn_data) {
 		memcpy(sensor->data_pkt, rmi_dev->xport->attn_data,
 			sensor->attn_size);
 		rmi_dev->xport->attn_data += sensor->attn_size;
 		rmi_dev->xport->attn_size -= sensor->attn_size;
 	} else {
 		retval = rmi_read_block(rmi_dev, f12->data_addr,
 					sensor->data_pkt, sensor->pkt_size);
 		if (retval < 0) {
 			dev_err(&fn->dev, "Failed to read object data. Code: %d.\n",
 				retval);
 			return retval;
 		}
 	}

 	if (f12->data1)
 		rmi_f12_process_objects(f12,
 			&sensor->data_pkt[f12->data1_offset]);

 	input_mt_sync_frame(sensor->input);

 	return 0;
 }

 static int rmi_f12_config(struct rmi_function *fn)
 {
 	struct rmi_driver *drv = fn->rmi_dev->driver;

 	drv->set_irq_bits(fn->rmi_dev, fn->irq_mask);

 	return 0;
 }

 static int rmi_f12_probe(struct rmi_function *fn)
 {
 	struct f12_data *f12;
 	int ret;
 	struct rmi_device *rmi_dev = fn->rmi_dev;
 	char buf;
 	u16 query_addr = fn->fd.query_base_addr;
 	const struct rmi_register_desc_item *item;
 	struct rmi_2d_sensor *sensor;
 	struct rmi_device_platform_data *pdata = rmi_get_platform_data(rmi_dev);
 	struct rmi_transport_dev *xport = rmi_dev->xport;
 	u16 data_offset = 0;

 	rmi_dbg(RMI_DEBUG_FN, &fn->dev, "%s\n", __func__);

 	ret = rmi_read(fn->rmi_dev, query_addr, &buf);
 	if (ret < 0) {
 		dev_err(&fn->dev, "Failed to read general info register: %d\n",
 			ret);
 		return -ENODEV;
 	}
 	++query_addr;

 	if (!(buf & 0x1)) {
 		dev_err(&fn->dev,
 			"Behavior of F12 without register descriptors is undefined.\n");
 		return -ENODEV;
 	}

 	f12 = devm_kzalloc(&fn->dev, sizeof(struct f12_data), GFP_KERNEL);
 	if (!f12)
 		return -ENOMEM;

 	if (fn->dev.of_node) {
 		ret = rmi_2d_sensor_of_probe(&fn->dev, &f12->sensor_pdata);
 		if (ret)
 			return ret;
 	} else if (pdata->sensor_pdata) {
 		f12->sensor_pdata = *pdata->sensor_pdata;
 	}

 	ret = rmi_read_register_desc(rmi_dev, query_addr,
 					&f12->query_reg_desc);
 	if (ret) {
 		dev_err(&fn->dev,
 			"Failed to read the Query Register Descriptor: %d\n",
 			ret);
 		return ret;
 	}
 	query_addr += 3;

 	ret = rmi_read_register_desc(rmi_dev, query_addr,
 						&f12->control_reg_desc);
 	if (ret) {
 		dev_err(&fn->dev,
 			"Failed to read the Control Register Descriptor: %d\n",
 			ret);
 		return ret;
 	}
 	query_addr += 3;

 	ret = rmi_read_register_desc(rmi_dev, query_addr,
 						&f12->data_reg_desc);
 	if (ret) {
 		dev_err(&fn->dev,
 			"Failed to read the Data Register Descriptor: %d\n",
 			ret);
 		return ret;
 	}
 	query_addr += 3;

 	sensor = &f12->sensor;
 	sensor->fn = fn;
 	f12->data_addr = fn->fd.data_base_addr;
 	sensor->pkt_size = rmi_register_desc_calc_size(&f12->data_reg_desc);

 	sensor->axis_align =
 		f12->sensor_pdata.axis_align;

 	sensor->x_mm = f12->sensor_pdata.x_mm;
 	sensor->y_mm = f12->sensor_pdata.y_mm;

 	if (sensor->sensor_type == rmi_sensor_default)
 		sensor->sensor_type =
 			f12->sensor_pdata.sensor_type;

 	rmi_dbg(RMI_DEBUG_FN, &fn->dev, "%s: data packet size: %d\n", __func__,
 		sensor->pkt_size);
 	sensor->data_pkt = devm_kzalloc(&fn->dev, sensor->pkt_size, GFP_KERNEL);
 	if (!sensor->data_pkt)
 		return -ENOMEM;

 	dev_set_drvdata(&fn->dev, f12);

 	ret = rmi_f12_read_sensor_tuning(f12);
 	if (ret)
 		return ret;

 	/*
 	 * Figure out what data is contained in the data registers. HID devices
 	 * may have registers defined, but their data is not reported in the
 	 * HID attention report. Registers which are not reported in the HID
 	 * attention report check to see if the device is receiving data from
 	 * HID attention reports.
 	 */
 	item = rmi_get_register_desc_item(&f12->data_reg_desc, 0);
 	if (item && !xport->attn_data)
 		data_offset += item->reg_size;

 	item = rmi_get_register_desc_item(&f12->data_reg_desc, 1);
 	if (item) {
 		f12->data1 = item;
 		f12->data1_offset = data_offset;
 		data_offset += item->reg_size;
 		sensor->nbr_fingers = item->num_subpackets;
 		sensor->report_abs = 1;
 		sensor->attn_size += item->reg_size;
 	}

 	item = rmi_get_register_desc_item(&f12->data_reg_desc, 2);
 	if (item && !xport->attn_data)
 		data_offset += item->reg_size;

 	item = rmi_get_register_desc_item(&f12->data_reg_desc, 3);
 	if (item && !xport->attn_data)
 		data_offset += item->reg_size;

 	item = rmi_get_register_desc_item(&f12->data_reg_desc, 4);
 	if (item && !xport->attn_data)
 		data_offset += item->reg_size;

 	item = rmi_get_register_desc_item(&f12->data_reg_desc, 5);
 	if (item) {
 		f12->data5 = item;
 		f12->data5_offset = data_offset;
 		data_offset += item->reg_size;
 		sensor->attn_size += item->reg_size;
 	}

 	item = rmi_get_register_desc_item(&f12->data_reg_desc, 6);
 	if (item && !xport->attn_data) {
 		f12->data6 = item;
 		f12->data6_offset = data_offset;
 		data_offset += item->reg_size;
 	}

 	item = rmi_get_register_desc_item(&f12->data_reg_desc, 7);
 	if (item && !xport->attn_data)
 		data_offset += item->reg_size;

 	item = rmi_get_register_desc_item(&f12->data_reg_desc, 8);
 	if (item && !xport->attn_data)
 		data_offset += item->reg_size;

 	item = rmi_get_register_desc_item(&f12->data_reg_desc, 9);
 	if (item && !xport->attn_data) {
 		f12->data9 = item;
 		f12->data9_offset = data_offset;
 		data_offset += item->reg_size;
 		if (!sensor->report_abs)
 			sensor->report_rel = 1;
 	}

 	item = rmi_get_register_desc_item(&f12->data_reg_desc, 10);
 	if (item && !xport->attn_data)
 		data_offset += item->reg_size;

 	item = rmi_get_register_desc_item(&f12->data_reg_desc, 11);
 	if (item && !xport->attn_data)
 		data_offset += item->reg_size;

 	item = rmi_get_register_desc_item(&f12->data_reg_desc, 12);
 	if (item && !xport->attn_data)
 		data_offset += item->reg_size;

 	item = rmi_get_register_desc_item(&f12->data_reg_desc, 13);
 	if (item && !xport->attn_data)
 		data_offset += item->reg_size;

 	item = rmi_get_register_desc_item(&f12->data_reg_desc, 14);
 	if (item && !xport->attn_data)
 		data_offset += item->reg_size;

 	item = rmi_get_register_desc_item(&f12->data_reg_desc, 15);
 	if (item && !xport->attn_data) {
 		f12->data15 = item;
 		f12->data15_offset = data_offset;
 		data_offset += item->reg_size;
 	}

 	/* allocate the in-kernel tracking buffers */
 	sensor->tracking_pos = devm_kzalloc(&fn->dev,
 			sizeof(struct input_mt_pos) * sensor->nbr_fingers,
 			GFP_KERNEL);
 	sensor->tracking_slots = devm_kzalloc(&fn->dev,
 			sizeof(int) * sensor->nbr_fingers, GFP_KERNEL);
 	sensor->objs = devm_kzalloc(&fn->dev,
 			sizeof(struct rmi_2d_sensor_abs_object)
 			* sensor->nbr_fingers, GFP_KERNEL);
 	if (!sensor->tracking_pos || !sensor->tracking_slots || !sensor->objs)
 		return -ENOMEM;

 	ret = rmi_2d_sensor_configure_input(fn, sensor);
 	if (ret)
 		return ret;

 	return 0;
 }

 struct rmi_function_handler rmi_f12_handler = {
 	.driver = {
 		.name = "rmi4_f12",
 	},
 	.func = 0x12,
 	.probe = rmi_f12_probe,
 	.config = rmi_f12_config,
 	.attention = rmi_f12_attention,
 };
	/*
	* Copyright (c) 2012-2016 Synaptics Incorporated
	*
	* This program is free software; you can redistribute it and/or modify it
	* under the terms of the GNU General Public License version 2 as published by
	* the Free Software Foundation.
	*/
	#include <linux/input.h>
	#include <linux/input/mt.h>
	#include <linux/rmi.h>
	#include "rmi_driver.h"
	#include "rmi_2d_sensor.h"

	enum rmi_f12_object_type {
	RMI_F12_OBJECT_NONE = 0x00,
	RMI_F12_OBJECT_FINGER = 0x01,
	RMI_F12_OBJECT_STYLUS = 0x02,
	RMI_F12_OBJECT_PALM = 0x03,
	RMI_F12_OBJECT_UNCLASSIFIED = 0x04,
	RMI_F12_OBJECT_GLOVED_FINGER = 0x06,
	RMI_F12_OBJECT_NARROW_OBJECT = 0x07,
	RMI_F12_OBJECT_HAND_EDGE = 0x08,
	RMI_F12_OBJECT_COVER = 0x0A,
	RMI_F12_OBJECT_STYLUS_2 = 0x0B,
	RMI_F12_OBJECT_ERASER = 0x0C,
	RMI_F12_OBJECT_SMALL_OBJECT = 0x0D,
	};

	struct f12_data {
	struct rmi_function *fn;
	struct rmi_2d_sensor sensor;
	struct rmi_2d_sensor_platform_data sensor_pdata;

	u16 data_addr;

	struct rmi_register_descriptor query_reg_desc;
	struct rmi_register_descriptor control_reg_desc;
	struct rmi_register_descriptor data_reg_desc;

	/* F12 Data1 describes sensed objects */
	const struct rmi_register_desc_item *data1;
	u16 data1_offset;

	/* F12 Data5 describes finger ACM */
	const struct rmi_register_desc_item *data5;
	u16 data5_offset;

	/* F12 Data5 describes Pen */
	const struct rmi_register_desc_item *data6;
	u16 data6_offset;


	/* F12 Data9 reports relative data */
	const struct rmi_register_desc_item *data9;
	u16 data9_offset;

	const struct rmi_register_desc_item *data15;
	u16 data15_offset;
	};

	static int rmi_f12_read_sensor_tuning(struct f12_data *f12)
	{
	const struct rmi_register_desc_item *item;
	struct rmi_2d_sensor *sensor = &f12->sensor;
	struct rmi_function *fn = sensor->fn;
	struct rmi_device *rmi_dev = fn->rmi_dev;
	int ret;
	int offset;
	u8 buf[15];
	int pitch_x = 0;
	int pitch_y = 0;
	int clip_x_low = 0;
	int clip_x_high = 0;
	int clip_y_low = 0;
	int clip_y_high = 0;
	int rx_receivers = 0;
	int tx_receivers = 0;
	int sensor_flags = 0;

	item = rmi_get_register_desc_item(&f12->control_reg_desc, 8);
	if (!item) {
	dev_err(&fn->dev,
	"F12 does not have the sensor tuning control register\n");
	return -ENODEV;
	}

	offset = rmi_register_desc_calc_reg_offset(&f12->control_reg_desc, 8);

	if (item->reg_size > sizeof(buf)) {
	dev_err(&fn->dev,
	"F12 control8 should be no bigger than %zd bytes, not: %ld\n",
	sizeof(buf), item->reg_size);
	return -ENODEV;
	}

	ret = rmi_read_block(rmi_dev, fn->fd.control_base_addr + offset, buf,
	item->reg_size);
	if (ret)
	return ret;

	offset = 0;
	if (rmi_register_desc_has_subpacket(item, 0)) {
	sensor->max_x = (buf[offset + 1] << 8) \| buf[offset];
	sensor->max_y = (buf[offset + 3] << 8) \| buf[offset + 2];
	offset += 4;
	}

	rmi_dbg(RMI_DEBUG_FN, &fn->dev, "%s: max_x: %d max_y: %d\n", __func__,
	sensor->max_x, sensor->max_y);

	if (rmi_register_desc_has_subpacket(item, 1)) {
	pitch_x = (buf[offset + 1] << 8) \| buf[offset];
	pitch_y = (buf[offset + 3] << 8) \| buf[offset + 2];
	offset += 4;
	}

	if (rmi_register_desc_has_subpacket(item, 2)) {
	sensor->axis_align.clip_x_low = buf[offset];
	sensor->axis_align.clip_x_high = sensor->max_x
	- buf[offset + 1];
	sensor->axis_align.clip_y_low = buf[offset + 2];
	sensor->axis_align.clip_y_high = sensor->max_y
	- buf[offset + 3];
	offset += 4;
	}

	rmi_dbg(RMI_DEBUG_FN, &fn->dev, "%s: x low: %d x high: %d y low: %d y high: %d\n",
	__func__, clip_x_low, clip_x_high, clip_y_low, clip_y_high);

	if (rmi_register_desc_has_subpacket(item, 3)) {
	rx_receivers = buf[offset];
	tx_receivers = buf[offset + 1];
	offset += 2;
	}

	if (rmi_register_desc_has_subpacket(item, 4)) {
	sensor_flags = buf[offset];
	offset += 1;
	}

	sensor->x_mm = (pitch_x * rx_receivers) >> 12;
	sensor->y_mm = (pitch_y * tx_receivers) >> 12;

	rmi_dbg(RMI_DEBUG_FN, &fn->dev, "%s: x_mm: %d y_mm: %d\n", __func__,
	sensor->x_mm, sensor->y_mm);

	return 0;
	}

	static void rmi_f12_process_objects(struct f12_data f12, u8 data1)
	{
	int i;
	struct rmi_2d_sensor *sensor = &f12->sensor;

	for (i = 0; i < f12->data1->num_subpackets; i++) {
	struct rmi_2d_sensor_abs_object *obj = &sensor->objs[i];

	obj->type = RMI_2D_OBJECT_NONE;
	obj->mt_tool = MT_TOOL_FINGER;

	switch (data1[0]) {
	case RMI_F12_OBJECT_FINGER:
	obj->type = RMI_2D_OBJECT_FINGER;
	break;
	case RMI_F12_OBJECT_STYLUS:
	obj->type = RMI_2D_OBJECT_STYLUS;
	obj->mt_tool = MT_TOOL_PEN;
	break;
	case RMI_F12_OBJECT_PALM:
	obj->type = RMI_2D_OBJECT_PALM;
	obj->mt_tool = MT_TOOL_PALM;
	break;
	case RMI_F12_OBJECT_UNCLASSIFIED:
	obj->type = RMI_2D_OBJECT_UNCLASSIFIED;
	break;
	}

	obj->x = (data1[2] << 8) \| data1[1];
	obj->y = (data1[4] << 8) \| data1[3];
	obj->z = data1[5];
	obj->wx = data1[6];
	obj->wy = data1[7];

	rmi_2d_sensor_abs_process(sensor, obj, i);

	data1 += 8;
	}

	if (sensor->kernel_tracking)
	input_mt_assign_slots(sensor->input,
	sensor->tracking_slots,
	sensor->tracking_pos,
	sensor->nbr_fingers,
	sensor->dmax);

	for (i = 0; i < sensor->nbr_fingers; i++)
	rmi_2d_sensor_abs_report(sensor, &sensor->objs[i], i);
	}

	static int rmi_f12_attention(struct rmi_function *fn,
	unsigned long *irq_nr_regs)
	{
	int retval;
	struct rmi_device *rmi_dev = fn->rmi_dev;
	struct f12_data *f12 = dev_get_drvdata(&fn->dev);
	struct rmi_2d_sensor *sensor = &f12->sensor;

	if (rmi_dev->xport->attn_data) {
	memcpy(sensor->data_pkt, rmi_dev->xport->attn_data,
	sensor->attn_size);
	rmi_dev->xport->attn_data += sensor->attn_size;
	rmi_dev->xport->attn_size -= sensor->attn_size;
	} else {
	retval = rmi_read_block(rmi_dev, f12->data_addr,
	sensor->data_pkt, sensor->pkt_size);
	if (retval < 0) {
	dev_err(&fn->dev, "Failed to read object data. Code: %d.\n",
	retval);
	return retval;
	}
	}

	if (f12->data1)
	rmi_f12_process_objects(f12,
	&sensor->data_pkt[f12->data1_offset]);

	input_mt_sync_frame(sensor->input);

	return 0;
	}

	static int rmi_f12_config(struct rmi_function *fn)
	{
	struct rmi_driver *drv = fn->rmi_dev->driver;

	drv->set_irq_bits(fn->rmi_dev, fn->irq_mask);

	return 0;
	}

	static int rmi_f12_probe(struct rmi_function *fn)
	{
	struct f12_data *f12;
	int ret;
	struct rmi_device *rmi_dev = fn->rmi_dev;
	char buf;
	u16 query_addr = fn->fd.query_base_addr;
	const struct rmi_register_desc_item *item;
	struct rmi_2d_sensor *sensor;
	struct rmi_device_platform_data *pdata = rmi_get_platform_data(rmi_dev);
	struct rmi_transport_dev *xport = rmi_dev->xport;
	u16 data_offset = 0;

	rmi_dbg(RMI_DEBUG_FN, &fn->dev, "%s\n", __func__);

	ret = rmi_read(fn->rmi_dev, query_addr, &buf);
	if (ret < 0) {
	dev_err(&fn->dev, "Failed to read general info register: %d\n",
	ret);
	return -ENODEV;
	}
	++query_addr;

	if (!(buf & 0x1)) {
	dev_err(&fn->dev,
	"Behavior of F12 without register descriptors is undefined.\n");
	return -ENODEV;
	}

	f12 = devm_kzalloc(&fn->dev, sizeof(struct f12_data), GFP_KERNEL);
	if (!f12)
	return -ENOMEM;

	if (fn->dev.of_node) {
	ret = rmi_2d_sensor_of_probe(&fn->dev, &f12->sensor_pdata);
	if (ret)
	return ret;
	} else if (pdata->sensor_pdata) {
	f12->sensor_pdata = *pdata->sensor_pdata;
	}

	ret = rmi_read_register_desc(rmi_dev, query_addr,
	&f12->query_reg_desc);
	if (ret) {
	dev_err(&fn->dev,
	"Failed to read the Query Register Descriptor: %d\n",
	ret);
	return ret;
	}
	query_addr += 3;

	ret = rmi_read_register_desc(rmi_dev, query_addr,
	&f12->control_reg_desc);
	if (ret) {
	dev_err(&fn->dev,
	"Failed to read the Control Register Descriptor: %d\n",
	ret);
	return ret;
	}
	query_addr += 3;

	ret = rmi_read_register_desc(rmi_dev, query_addr,
	&f12->data_reg_desc);
	if (ret) {
	dev_err(&fn->dev,
	"Failed to read the Data Register Descriptor: %d\n",
	ret);
	return ret;
	}
	query_addr += 3;

	sensor = &f12->sensor;
	sensor->fn = fn;
	f12->data_addr = fn->fd.data_base_addr;
	sensor->pkt_size = rmi_register_desc_calc_size(&f12->data_reg_desc);

	sensor->axis_align =
	f12->sensor_pdata.axis_align;

	sensor->x_mm = f12->sensor_pdata.x_mm;
	sensor->y_mm = f12->sensor_pdata.y_mm;

	if (sensor->sensor_type == rmi_sensor_default)
	sensor->sensor_type =
	f12->sensor_pdata.sensor_type;

	rmi_dbg(RMI_DEBUG_FN, &fn->dev, "%s: data packet size: %d\n", __func__,
	sensor->pkt_size);
	sensor->data_pkt = devm_kzalloc(&fn->dev, sensor->pkt_size, GFP_KERNEL);
	if (!sensor->data_pkt)
	return -ENOMEM;

	dev_set_drvdata(&fn->dev, f12);

	ret = rmi_f12_read_sensor_tuning(f12);
	if (ret)
	return ret;

	/*
	* Figure out what data is contained in the data registers. HID devices
	* may have registers defined, but their data is not reported in the
	* HID attention report. Registers which are not reported in the HID
	* attention report check to see if the device is receiving data from
	* HID attention reports.
	*/
	item = rmi_get_register_desc_item(&f12->data_reg_desc, 0);
	if (item && !xport->attn_data)
	data_offset += item->reg_size;

	item = rmi_get_register_desc_item(&f12->data_reg_desc, 1);
	if (item) {
	f12->data1 = item;
	f12->data1_offset = data_offset;
	data_offset += item->reg_size;
	sensor->nbr_fingers = item->num_subpackets;
	sensor->report_abs = 1;
	sensor->attn_size += item->reg_size;
	}

	item = rmi_get_register_desc_item(&f12->data_reg_desc, 2);
	if (item && !xport->attn_data)
	data_offset += item->reg_size;

	item = rmi_get_register_desc_item(&f12->data_reg_desc, 3);
	if (item && !xport->attn_data)
	data_offset += item->reg_size;

	item = rmi_get_register_desc_item(&f12->data_reg_desc, 4);
	if (item && !xport->attn_data)
	data_offset += item->reg_size;

	item = rmi_get_register_desc_item(&f12->data_reg_desc, 5);
	if (item) {
	f12->data5 = item;
	f12->data5_offset = data_offset;
	data_offset += item->reg_size;
	sensor->attn_size += item->reg_size;
	}

	item = rmi_get_register_desc_item(&f12->data_reg_desc, 6);
	if (item && !xport->attn_data) {
	f12->data6 = item;
	f12->data6_offset = data_offset;
	data_offset += item->reg_size;
	}

	item = rmi_get_register_desc_item(&f12->data_reg_desc, 7);
	if (item && !xport->attn_data)
	data_offset += item->reg_size;

	item = rmi_get_register_desc_item(&f12->data_reg_desc, 8);
	if (item && !xport->attn_data)
	data_offset += item->reg_size;

	item = rmi_get_register_desc_item(&f12->data_reg_desc, 9);
	if (item && !xport->attn_data) {
	f12->data9 = item;
	f12->data9_offset = data_offset;
	data_offset += item->reg_size;
	if (!sensor->report_abs)
	sensor->report_rel = 1;
	}

	item = rmi_get_register_desc_item(&f12->data_reg_desc, 10);
	if (item && !xport->attn_data)
	data_offset += item->reg_size;

	item = rmi_get_register_desc_item(&f12->data_reg_desc, 11);
	if (item && !xport->attn_data)
	data_offset += item->reg_size;

	item = rmi_get_register_desc_item(&f12->data_reg_desc, 12);
	if (item && !xport->attn_data)
	data_offset += item->reg_size;

	item = rmi_get_register_desc_item(&f12->data_reg_desc, 13);
	if (item && !xport->attn_data)
	data_offset += item->reg_size;

	item = rmi_get_register_desc_item(&f12->data_reg_desc, 14);
	if (item && !xport->attn_data)
	data_offset += item->reg_size;

	item = rmi_get_register_desc_item(&f12->data_reg_desc, 15);
	if (item && !xport->attn_data) {
	f12->data15 = item;
	f12->data15_offset = data_offset;
	data_offset += item->reg_size;
	}

	/* allocate the in-kernel tracking buffers */
	sensor->tracking_pos = devm_kzalloc(&fn->dev,
	sizeof(struct input_mt_pos) * sensor->nbr_fingers,
	GFP_KERNEL);
	sensor->tracking_slots = devm_kzalloc(&fn->dev,
	sizeof(int) * sensor->nbr_fingers, GFP_KERNEL);
	sensor->objs = devm_kzalloc(&fn->dev,
	sizeof(struct rmi_2d_sensor_abs_object)
	* sensor->nbr_fingers, GFP_KERNEL);
	if (!sensor->tracking_pos \|\| !sensor->tracking_slots \|\| !sensor->objs)
	return -ENOMEM;

	ret = rmi_2d_sensor_configure_input(fn, sensor);
	if (ret)
	return ret;

	return 0;
	}

	struct rmi_function_handler rmi_f12_handler = {
	.driver = {
	.name = "rmi4_f12",
	},
	.func = 0x12,
	.probe = rmi_f12_probe,
	.config = rmi_f12_config,
	.attention = rmi_f12_attention,
	};