arch/mips/include/asm/octeon/cvmx-helper-board.h - kernel/quantenna - Git at Google

 /***********************license start***************
  * Author: Cavium Networks
  *
  * Contact: support@caviumnetworks.com
  * This file is part of the OCTEON SDK
  *
  * Copyright (c) 2003-2008 Cavium Networks
  *
  * This file is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License, Version 2, as
  * published by the Free Software Foundation.
  *
  * This file is distributed in the hope that it will be useful, but
  * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
  * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
  * NONINFRINGEMENT.  See the GNU General Public License for more
  * details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this file; if not, write to the Free Software
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
  * or visit http://www.gnu.org/licenses/.
  *
  * This file may also be available under a different license from Cavium.
  * Contact Cavium Networks for more information
  ***********************license end**************************************/

 /**
  *
  * Helper functions to abstract board specific data about
  * network ports from the rest of the cvmx-helper files.
  *
  */
 #ifndef __CVMX_HELPER_BOARD_H__
 #define __CVMX_HELPER_BOARD_H__

 #include <asm/octeon/cvmx-helper.h>

 enum cvmx_helper_board_usb_clock_types {
 	USB_CLOCK_TYPE_REF_12,
 	USB_CLOCK_TYPE_REF_24,
 	USB_CLOCK_TYPE_REF_48,
 	USB_CLOCK_TYPE_CRYSTAL_12,
 };

 typedef enum {
 	set_phy_link_flags_autoneg = 0x1,
 	set_phy_link_flags_flow_control_dont_touch = 0x0 << 1,
 	set_phy_link_flags_flow_control_enable = 0x1 << 1,
 	set_phy_link_flags_flow_control_disable = 0x2 << 1,
 	set_phy_link_flags_flow_control_mask = 0x3 << 1,	/* Mask for 2 bit wide flow control field */
 } cvmx_helper_board_set_phy_link_flags_types_t;

 /*
  * Fake IPD port, the RGMII/MII interface may use different PHY, use
  * this macro to return appropriate MIX address to read the PHY.
  */
 #define CVMX_HELPER_BOARD_MGMT_IPD_PORT	    -10

 /**
  * cvmx_override_board_link_get(int ipd_port) is a function
  * pointer. It is meant to allow customization of the process of
  * talking to a PHY to determine link speed. It is called every
  * time a PHY must be polled for link status. Users should set
  * this pointer to a function before calling any cvmx-helper
  * operations.
  */
 extern cvmx_helper_link_info_t(*cvmx_override_board_link_get) (int ipd_port);

 /**
  * Return the MII PHY address associated with the given IPD
  * port. A result of -1 means there isn't a MII capable PHY
  * connected to this port. On chips supporting multiple MII
  * busses the bus number is encoded in bits <15:8>.
  *
  * This function must be modifed for every new Octeon board.
  * Internally it uses switch statements based on the cvmx_sysinfo
  * data to determine board types and revisions. It relys on the
  * fact that every Octeon board receives a unique board type
  * enumeration from the bootloader.
  *
  * @ipd_port: Octeon IPD port to get the MII address for.
  *
  * Returns MII PHY address and bus number or -1.
  */
 extern int cvmx_helper_board_get_mii_address(int ipd_port);

 /**
  * This function as a board specific method of changing the PHY
  * speed, duplex, and autonegotiation. This programs the PHY and
  * not Octeon. This can be used to force Octeon's links to
  * specific settings.
  *
  * @phy_addr:  The address of the PHY to program
  * @link_flags:
  *		    Flags to control autonegotiation.  Bit 0 is autonegotiation
  *		    enable/disable to maintain backward compatibility.
  * @link_info: Link speed to program. If the speed is zero and autonegotiation
  *		    is enabled, all possible negotiation speeds are advertised.
  *
  * Returns Zero on success, negative on failure
  */
 int cvmx_helper_board_link_set_phy(int phy_addr,
 				   cvmx_helper_board_set_phy_link_flags_types_t
 				   link_flags,
 				   cvmx_helper_link_info_t link_info);

 /**
  * This function is the board specific method of determining an
  * ethernet ports link speed. Most Octeon boards have Marvell PHYs
  * and are handled by the fall through case. This function must be
  * updated for boards that don't have the normal Marvell PHYs.
  *
  * This function must be modifed for every new Octeon board.
  * Internally it uses switch statements based on the cvmx_sysinfo
  * data to determine board types and revisions. It relys on the
  * fact that every Octeon board receives a unique board type
  * enumeration from the bootloader.
  *
  * @ipd_port: IPD input port associated with the port we want to get link
  *		   status for.
  *
  * Returns The ports link status. If the link isn't fully resolved, this must
  *	   return zero.
  */
 extern cvmx_helper_link_info_t __cvmx_helper_board_link_get(int ipd_port);

 /**
  * This function is called by cvmx_helper_interface_probe() after it
  * determines the number of ports Octeon can support on a specific
  * interface. This function is the per board location to override
  * this value. It is called with the number of ports Octeon might
  * support and should return the number of actual ports on the
  * board.
  *
  * This function must be modifed for every new Octeon board.
  * Internally it uses switch statements based on the cvmx_sysinfo
  * data to determine board types and revisions. It relys on the
  * fact that every Octeon board receives a unique board type
  * enumeration from the bootloader.
  *
  * @interface: Interface to probe
  * @supported_ports:
  *		    Number of ports Octeon supports.
  *
  * Returns Number of ports the actual board supports. Many times this will
  *	   simple be "support_ports".
  */
 extern int __cvmx_helper_board_interface_probe(int interface,
 					       int supported_ports);

 /**
  * Enable packet input/output from the hardware. This function is
  * called after by cvmx_helper_packet_hardware_enable() to
  * perform board specific initialization. For most boards
  * nothing is needed.
  *
  * @interface: Interface to enable
  *
  * Returns Zero on success, negative on failure
  */
 extern int __cvmx_helper_board_hardware_enable(int interface);

 enum cvmx_helper_board_usb_clock_types __cvmx_helper_board_usb_get_clock_type(void);

 #endif /* __CVMX_HELPER_BOARD_H__ */
	/*********************license start*************
	* Author: Cavium Networks
	*
	* Contact: support@caviumnetworks.com
	* This file is part of the OCTEON SDK
	*
	* Copyright (c) 2003-2008 Cavium Networks
	*
	* This file is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License, Version 2, as
	* published by the Free Software Foundation.
	*
	* This file is distributed in the hope that it will be useful, but
	* AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
	* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
	* NONINFRINGEMENT. See the GNU General Public License for more
	* details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this file; if not, write to the Free Software
	* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
	* or visit http://www.gnu.org/licenses/.
	*
	* This file may also be available under a different license from Cavium.
	* Contact Cavium Networks for more information
	*********************license end************************************/

	/**
	*
	* Helper functions to abstract board specific data about
	* network ports from the rest of the cvmx-helper files.
	*
	*/
	#ifndef __CVMX_HELPER_BOARD_H__
	#define __CVMX_HELPER_BOARD_H__

	#include <asm/octeon/cvmx-helper.h>

	enum cvmx_helper_board_usb_clock_types {
	USB_CLOCK_TYPE_REF_12,
	USB_CLOCK_TYPE_REF_24,
	USB_CLOCK_TYPE_REF_48,
	USB_CLOCK_TYPE_CRYSTAL_12,
	};

	typedef enum {
	set_phy_link_flags_autoneg = 0x1,
	set_phy_link_flags_flow_control_dont_touch = 0x0 << 1,
	set_phy_link_flags_flow_control_enable = 0x1 << 1,
	set_phy_link_flags_flow_control_disable = 0x2 << 1,
	set_phy_link_flags_flow_control_mask = 0x3 << 1, /* Mask for 2 bit wide flow control field */
	} cvmx_helper_board_set_phy_link_flags_types_t;

	/*
	* Fake IPD port, the RGMII/MII interface may use different PHY, use
	* this macro to return appropriate MIX address to read the PHY.
	*/
	#define CVMX_HELPER_BOARD_MGMT_IPD_PORT -10

	/**
	* cvmx_override_board_link_get(int ipd_port) is a function
	* pointer. It is meant to allow customization of the process of
	* talking to a PHY to determine link speed. It is called every
	* time a PHY must be polled for link status. Users should set
	* this pointer to a function before calling any cvmx-helper
	* operations.
	*/
	extern cvmx_helper_link_info_t(*cvmx_override_board_link_get) (int ipd_port);

	/**
	* Return the MII PHY address associated with the given IPD
	* port. A result of -1 means there isn't a MII capable PHY
	* connected to this port. On chips supporting multiple MII
	* busses the bus number is encoded in bits <15:8>.
	*
	* This function must be modifed for every new Octeon board.
	* Internally it uses switch statements based on the cvmx_sysinfo
	* data to determine board types and revisions. It relys on the
	* fact that every Octeon board receives a unique board type
	* enumeration from the bootloader.
	*
	* @ipd_port: Octeon IPD port to get the MII address for.
	*
	* Returns MII PHY address and bus number or -1.
	*/
	extern int cvmx_helper_board_get_mii_address(int ipd_port);

	/**
	* This function as a board specific method of changing the PHY
	* speed, duplex, and autonegotiation. This programs the PHY and
	* not Octeon. This can be used to force Octeon's links to
	* specific settings.
	*
	* @phy_addr: The address of the PHY to program
	* @link_flags:
	* Flags to control autonegotiation. Bit 0 is autonegotiation
	* enable/disable to maintain backward compatibility.
	* @link_info: Link speed to program. If the speed is zero and autonegotiation
	* is enabled, all possible negotiation speeds are advertised.
	*
	* Returns Zero on success, negative on failure
	*/
	int cvmx_helper_board_link_set_phy(int phy_addr,
	cvmx_helper_board_set_phy_link_flags_types_t
	link_flags,
	cvmx_helper_link_info_t link_info);

	/**
	* This function is the board specific method of determining an
	* ethernet ports link speed. Most Octeon boards have Marvell PHYs
	* and are handled by the fall through case. This function must be
	* updated for boards that don't have the normal Marvell PHYs.
	*
	* This function must be modifed for every new Octeon board.
	* Internally it uses switch statements based on the cvmx_sysinfo
	* data to determine board types and revisions. It relys on the
	* fact that every Octeon board receives a unique board type
	* enumeration from the bootloader.
	*
	* @ipd_port: IPD input port associated with the port we want to get link
	* status for.
	*
	* Returns The ports link status. If the link isn't fully resolved, this must
	* return zero.
	*/
	extern cvmx_helper_link_info_t __cvmx_helper_board_link_get(int ipd_port);

	/**
	* This function is called by cvmx_helper_interface_probe() after it
	* determines the number of ports Octeon can support on a specific
	* interface. This function is the per board location to override
	* this value. It is called with the number of ports Octeon might
	* support and should return the number of actual ports on the
	* board.
	*
	* This function must be modifed for every new Octeon board.
	* Internally it uses switch statements based on the cvmx_sysinfo
	* data to determine board types and revisions. It relys on the
	* fact that every Octeon board receives a unique board type
	* enumeration from the bootloader.
	*
	* @interface: Interface to probe
	* @supported_ports:
	* Number of ports Octeon supports.
	*
	* Returns Number of ports the actual board supports. Many times this will
	* simple be "support_ports".
	*/
	extern int __cvmx_helper_board_interface_probe(int interface,
	int supported_ports);

	/**
	* Enable packet input/output from the hardware. This function is
	* called after by cvmx_helper_packet_hardware_enable() to
	* perform board specific initialization. For most boards
	* nothing is needed.
	*
	* @interface: Interface to enable
	*
	* Returns Zero on success, negative on failure
	*/
	extern int __cvmx_helper_board_hardware_enable(int interface);

	enum cvmx_helper_board_usb_clock_types __cvmx_helper_board_usb_get_clock_type(void);

	#endif /* __CVMX_HELPER_BOARD_H__ */