| /** |
| * Copyright (C) 2005 - 2015 Emulex |
| * All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License version 2 |
| * as published by the Free Software Foundation. The full GNU General |
| * Public License is included in this distribution in the file called COPYING. |
| * |
| * Contact Information: |
| * linux-drivers@avagotech.com |
| * |
| * Emulex |
| * 3333 Susan Street |
| * Costa Mesa, CA 92626 |
| */ |
| |
| #include <scsi/iscsi_proto.h> |
| |
| #include "be_main.h" |
| #include "be.h" |
| #include "be_mgmt.h" |
| |
| int beiscsi_pci_soft_reset(struct beiscsi_hba *phba) |
| { |
| u32 sreset; |
| u8 *pci_reset_offset = 0; |
| u8 *pci_online0_offset = 0; |
| u8 *pci_online1_offset = 0; |
| u32 pconline0 = 0; |
| u32 pconline1 = 0; |
| u32 i; |
| |
| pci_reset_offset = (u8 *)phba->pci_va + BE2_SOFT_RESET; |
| pci_online0_offset = (u8 *)phba->pci_va + BE2_PCI_ONLINE0; |
| pci_online1_offset = (u8 *)phba->pci_va + BE2_PCI_ONLINE1; |
| sreset = readl((void *)pci_reset_offset); |
| sreset |= BE2_SET_RESET; |
| writel(sreset, (void *)pci_reset_offset); |
| |
| i = 0; |
| while (sreset & BE2_SET_RESET) { |
| if (i > 64) |
| break; |
| msleep(100); |
| sreset = readl((void *)pci_reset_offset); |
| i++; |
| } |
| |
| if (sreset & BE2_SET_RESET) { |
| printk(KERN_ERR DRV_NAME |
| " Soft Reset did not deassert\n"); |
| return -EIO; |
| } |
| pconline1 = BE2_MPU_IRAM_ONLINE; |
| writel(pconline0, (void *)pci_online0_offset); |
| writel(pconline1, (void *)pci_online1_offset); |
| |
| sreset |= BE2_SET_RESET; |
| writel(sreset, (void *)pci_reset_offset); |
| |
| i = 0; |
| while (sreset & BE2_SET_RESET) { |
| if (i > 64) |
| break; |
| msleep(1); |
| sreset = readl((void *)pci_reset_offset); |
| i++; |
| } |
| if (sreset & BE2_SET_RESET) { |
| printk(KERN_ERR DRV_NAME |
| " MPU Online Soft Reset did not deassert\n"); |
| return -EIO; |
| } |
| return 0; |
| } |
| |
| int be_chk_reset_complete(struct beiscsi_hba *phba) |
| { |
| unsigned int num_loop; |
| u8 *mpu_sem = 0; |
| u32 status; |
| |
| num_loop = 1000; |
| mpu_sem = (u8 *)phba->csr_va + MPU_EP_SEMAPHORE; |
| msleep(5000); |
| |
| while (num_loop) { |
| status = readl((void *)mpu_sem); |
| |
| if ((status & 0x80000000) || (status & 0x0000FFFF) == 0xC000) |
| break; |
| msleep(60); |
| num_loop--; |
| } |
| |
| if ((status & 0x80000000) || (!num_loop)) { |
| beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT, |
| "BC_%d : Failed in be_chk_reset_complete" |
| "status = 0x%x\n", status); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| unsigned int alloc_mcc_tag(struct beiscsi_hba *phba) |
| { |
| unsigned int tag = 0; |
| |
| spin_lock(&phba->ctrl.mcc_lock); |
| if (phba->ctrl.mcc_tag_available) { |
| tag = phba->ctrl.mcc_tag[phba->ctrl.mcc_alloc_index]; |
| phba->ctrl.mcc_tag[phba->ctrl.mcc_alloc_index] = 0; |
| phba->ctrl.mcc_tag_status[tag] = 0; |
| phba->ctrl.ptag_state[tag].tag_state = 0; |
| } |
| if (tag) { |
| phba->ctrl.mcc_tag_available--; |
| if (phba->ctrl.mcc_alloc_index == (MAX_MCC_CMD - 1)) |
| phba->ctrl.mcc_alloc_index = 0; |
| else |
| phba->ctrl.mcc_alloc_index++; |
| } |
| spin_unlock(&phba->ctrl.mcc_lock); |
| return tag; |
| } |
| |
| struct be_mcc_wrb *alloc_mcc_wrb(struct beiscsi_hba *phba, |
| unsigned int *ref_tag) |
| { |
| struct be_queue_info *mccq = &phba->ctrl.mcc_obj.q; |
| struct be_mcc_wrb *wrb = NULL; |
| unsigned int tag; |
| |
| spin_lock_bh(&phba->ctrl.mcc_lock); |
| if (mccq->used == mccq->len) { |
| beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT | |
| BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX, |
| "BC_%d : MCC queue full: WRB used %u tag avail %u\n", |
| mccq->used, phba->ctrl.mcc_tag_available); |
| goto alloc_failed; |
| } |
| |
| if (!phba->ctrl.mcc_tag_available) |
| goto alloc_failed; |
| |
| tag = phba->ctrl.mcc_tag[phba->ctrl.mcc_alloc_index]; |
| if (!tag) { |
| beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT | |
| BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX, |
| "BC_%d : MCC tag 0 allocated: tag avail %u alloc index %u\n", |
| phba->ctrl.mcc_tag_available, |
| phba->ctrl.mcc_alloc_index); |
| goto alloc_failed; |
| } |
| |
| /* return this tag for further reference */ |
| *ref_tag = tag; |
| phba->ctrl.mcc_tag[phba->ctrl.mcc_alloc_index] = 0; |
| phba->ctrl.mcc_tag_status[tag] = 0; |
| phba->ctrl.ptag_state[tag].tag_state = 0; |
| phba->ctrl.mcc_tag_available--; |
| if (phba->ctrl.mcc_alloc_index == (MAX_MCC_CMD - 1)) |
| phba->ctrl.mcc_alloc_index = 0; |
| else |
| phba->ctrl.mcc_alloc_index++; |
| |
| wrb = queue_head_node(mccq); |
| memset(wrb, 0, sizeof(*wrb)); |
| wrb->tag0 = tag; |
| wrb->tag0 |= (mccq->head << MCC_Q_WRB_IDX_SHIFT) & MCC_Q_WRB_IDX_MASK; |
| queue_head_inc(mccq); |
| mccq->used++; |
| |
| alloc_failed: |
| spin_unlock_bh(&phba->ctrl.mcc_lock); |
| return wrb; |
| } |
| |
| void free_mcc_wrb(struct be_ctrl_info *ctrl, unsigned int tag) |
| { |
| struct be_queue_info *mccq = &ctrl->mcc_obj.q; |
| |
| spin_lock_bh(&ctrl->mcc_lock); |
| tag = tag & MCC_Q_CMD_TAG_MASK; |
| ctrl->mcc_tag[ctrl->mcc_free_index] = tag; |
| if (ctrl->mcc_free_index == (MAX_MCC_CMD - 1)) |
| ctrl->mcc_free_index = 0; |
| else |
| ctrl->mcc_free_index++; |
| ctrl->mcc_tag_available++; |
| mccq->used--; |
| spin_unlock_bh(&ctrl->mcc_lock); |
| } |
| |
| /** |
| * beiscsi_fail_session(): Closing session with appropriate error |
| * @cls_session: ptr to session |
| **/ |
| void beiscsi_fail_session(struct iscsi_cls_session *cls_session) |
| { |
| iscsi_session_failure(cls_session->dd_data, ISCSI_ERR_CONN_FAILED); |
| } |
| |
| /* |
| * beiscsi_mccq_compl_wait()- Process completion in MCC CQ |
| * @phba: Driver private structure |
| * @tag: Tag for the MBX Command |
| * @wrb: the WRB used for the MBX Command |
| * @mbx_cmd_mem: ptr to memory allocated for MBX Cmd |
| * |
| * Waits for MBX completion with the passed TAG. |
| * |
| * return |
| * Success: 0 |
| * Failure: Non-Zero |
| **/ |
| int beiscsi_mccq_compl_wait(struct beiscsi_hba *phba, |
| uint32_t tag, struct be_mcc_wrb **wrb, |
| struct be_dma_mem *mbx_cmd_mem) |
| { |
| int rc = 0; |
| uint32_t mcc_tag_status; |
| uint16_t status = 0, addl_status = 0, wrb_num = 0; |
| struct be_mcc_wrb *temp_wrb; |
| struct be_cmd_req_hdr *mbx_hdr; |
| struct be_cmd_resp_hdr *mbx_resp_hdr; |
| struct be_queue_info *mccq = &phba->ctrl.mcc_obj.q; |
| |
| if (beiscsi_error(phba)) |
| return -EPERM; |
| |
| /* wait for the mccq completion */ |
| rc = wait_event_interruptible_timeout( |
| phba->ctrl.mcc_wait[tag], |
| phba->ctrl.mcc_tag_status[tag], |
| msecs_to_jiffies( |
| BEISCSI_HOST_MBX_TIMEOUT)); |
| /** |
| * If MBOX cmd timeout expired, tag and resource allocated |
| * for cmd is not freed until FW returns completion. |
| */ |
| if (rc <= 0) { |
| struct be_dma_mem *tag_mem; |
| |
| /** |
| * PCI/DMA memory allocated and posted in non-embedded mode |
| * will have mbx_cmd_mem != NULL. |
| * Save virtual and bus addresses for the command so that it |
| * can be freed later. |
| **/ |
| tag_mem = &phba->ctrl.ptag_state[tag].tag_mem_state; |
| if (mbx_cmd_mem) { |
| tag_mem->size = mbx_cmd_mem->size; |
| tag_mem->va = mbx_cmd_mem->va; |
| tag_mem->dma = mbx_cmd_mem->dma; |
| } else |
| tag_mem->size = 0; |
| |
| /* first make tag_mem_state visible to all */ |
| wmb(); |
| set_bit(MCC_TAG_STATE_TIMEOUT, |
| &phba->ctrl.ptag_state[tag].tag_state); |
| |
| beiscsi_log(phba, KERN_ERR, |
| BEISCSI_LOG_INIT | BEISCSI_LOG_EH | |
| BEISCSI_LOG_CONFIG, |
| "BC_%d : MBX Cmd Completion timed out\n"); |
| return -EBUSY; |
| } |
| |
| rc = 0; |
| mcc_tag_status = phba->ctrl.mcc_tag_status[tag]; |
| status = (mcc_tag_status & CQE_STATUS_MASK); |
| addl_status = ((mcc_tag_status & CQE_STATUS_ADDL_MASK) >> |
| CQE_STATUS_ADDL_SHIFT); |
| |
| if (mbx_cmd_mem) { |
| mbx_hdr = (struct be_cmd_req_hdr *)mbx_cmd_mem->va; |
| } else { |
| wrb_num = (mcc_tag_status & CQE_STATUS_WRB_MASK) >> |
| CQE_STATUS_WRB_SHIFT; |
| temp_wrb = (struct be_mcc_wrb *)queue_get_wrb(mccq, wrb_num); |
| mbx_hdr = embedded_payload(temp_wrb); |
| |
| if (wrb) |
| *wrb = temp_wrb; |
| } |
| |
| if (status || addl_status) { |
| beiscsi_log(phba, KERN_WARNING, |
| BEISCSI_LOG_INIT | BEISCSI_LOG_EH | |
| BEISCSI_LOG_CONFIG, |
| "BC_%d : MBX Cmd Failed for " |
| "Subsys : %d Opcode : %d with " |
| "Status : %d and Extd_Status : %d\n", |
| mbx_hdr->subsystem, |
| mbx_hdr->opcode, |
| status, addl_status); |
| rc = -EIO; |
| if (status == MCC_STATUS_INSUFFICIENT_BUFFER) { |
| mbx_resp_hdr = (struct be_cmd_resp_hdr *) mbx_hdr; |
| beiscsi_log(phba, KERN_WARNING, |
| BEISCSI_LOG_INIT | BEISCSI_LOG_EH | |
| BEISCSI_LOG_CONFIG, |
| "BC_%d : Insufficient Buffer Error " |
| "Resp_Len : %d Actual_Resp_Len : %d\n", |
| mbx_resp_hdr->response_length, |
| mbx_resp_hdr->actual_resp_len); |
| rc = -EAGAIN; |
| } |
| } |
| |
| free_mcc_wrb(&phba->ctrl, tag); |
| return rc; |
| } |
| |
| /* |
| * beiscsi_process_mbox_compl()- Check the MBX completion status |
| * @ctrl: Function specific MBX data structure |
| * @compl: Completion status of MBX Command |
| * |
| * Check for the MBX completion status when BMBX method used |
| * |
| * return |
| * Success: Zero |
| * Failure: Non-Zero |
| **/ |
| static int beiscsi_process_mbox_compl(struct be_ctrl_info *ctrl, |
| struct be_mcc_compl *compl) |
| { |
| u16 compl_status, extd_status; |
| struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem); |
| struct beiscsi_hba *phba = pci_get_drvdata(ctrl->pdev); |
| struct be_cmd_req_hdr *hdr = embedded_payload(wrb); |
| struct be_cmd_resp_hdr *resp_hdr; |
| |
| /** |
| * To check if valid bit is set, check the entire word as we don't know |
| * the endianness of the data (old entry is host endian while a new |
| * entry is little endian) |
| */ |
| if (!compl->flags) { |
| beiscsi_log(phba, KERN_ERR, |
| BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX, |
| "BC_%d : BMBX busy, no completion\n"); |
| return -EBUSY; |
| } |
| compl->flags = le32_to_cpu(compl->flags); |
| WARN_ON((compl->flags & CQE_FLAGS_VALID_MASK) == 0); |
| |
| /** |
| * Just swap the status to host endian; |
| * mcc tag is opaquely copied from mcc_wrb. |
| */ |
| be_dws_le_to_cpu(compl, 4); |
| compl_status = (compl->status >> CQE_STATUS_COMPL_SHIFT) & |
| CQE_STATUS_COMPL_MASK; |
| extd_status = (compl->status >> CQE_STATUS_EXTD_SHIFT) & |
| CQE_STATUS_EXTD_MASK; |
| /* Need to reset the entire word that houses the valid bit */ |
| compl->flags = 0; |
| |
| if (compl_status == MCC_STATUS_SUCCESS) |
| return 0; |
| |
| beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX, |
| "BC_%d : error in cmd completion: Subsystem : %d Opcode : %d status(compl/extd)=%d/%d\n", |
| hdr->subsystem, hdr->opcode, compl_status, extd_status); |
| |
| if (compl_status == MCC_STATUS_INSUFFICIENT_BUFFER) { |
| /* if status is insufficient buffer, check the length */ |
| resp_hdr = (struct be_cmd_resp_hdr *) hdr; |
| if (resp_hdr->response_length) |
| return 0; |
| } |
| return -EINVAL; |
| } |
| |
| static void beiscsi_process_async_link(struct beiscsi_hba *phba, |
| struct be_mcc_compl *compl) |
| { |
| struct be_async_event_link_state *evt; |
| |
| evt = (struct be_async_event_link_state *)compl; |
| |
| phba->port_speed = evt->port_speed; |
| /** |
| * Check logical link status in ASYNC event. |
| * This has been newly introduced in SKH-R Firmware 10.0.338.45. |
| **/ |
| if (evt->port_link_status & BE_ASYNC_LINK_UP_MASK) { |
| phba->state = BE_ADAPTER_LINK_UP | BE_ADAPTER_CHECK_BOOT; |
| phba->get_boot = BE_GET_BOOT_RETRIES; |
| __beiscsi_log(phba, KERN_ERR, |
| "BC_%d : Link Up on Port %d tag 0x%x\n", |
| evt->physical_port, evt->event_tag); |
| } else { |
| phba->state = BE_ADAPTER_LINK_DOWN; |
| __beiscsi_log(phba, KERN_ERR, |
| "BC_%d : Link Down on Port %d tag 0x%x\n", |
| evt->physical_port, evt->event_tag); |
| iscsi_host_for_each_session(phba->shost, |
| beiscsi_fail_session); |
| } |
| } |
| |
| static char *beiscsi_port_misconf_event_msg[] = { |
| "Physical Link is functional.", |
| "Optics faulted/incorrectly installed/not installed - Reseat optics, if issue not resolved, replace.", |
| "Optics of two types installed - Remove one optic or install matching pair of optics.", |
| "Incompatible optics - Replace with compatible optics for card to function.", |
| "Unqualified optics - Replace with Avago optics for Warranty and Technical Support.", |
| "Uncertified optics - Replace with Avago Certified optics to enable link operation." |
| }; |
| |
| static void beiscsi_process_async_sli(struct beiscsi_hba *phba, |
| struct be_mcc_compl *compl) |
| { |
| struct be_async_event_sli *async_sli; |
| u8 evt_type, state, old_state, le; |
| char *sev = KERN_WARNING; |
| char *msg = NULL; |
| |
| evt_type = compl->flags >> ASYNC_TRAILER_EVENT_TYPE_SHIFT; |
| evt_type &= ASYNC_TRAILER_EVENT_TYPE_MASK; |
| |
| /* processing only MISCONFIGURED physical port event */ |
| if (evt_type != ASYNC_SLI_EVENT_TYPE_MISCONFIGURED) |
| return; |
| |
| async_sli = (struct be_async_event_sli *)compl; |
| state = async_sli->event_data1 >> |
| (phba->fw_config.phys_port * 8) & 0xff; |
| le = async_sli->event_data2 >> |
| (phba->fw_config.phys_port * 8) & 0xff; |
| |
| old_state = phba->optic_state; |
| phba->optic_state = state; |
| |
| if (state >= ARRAY_SIZE(beiscsi_port_misconf_event_msg)) { |
| /* fw is reporting a state we don't know, log and return */ |
| __beiscsi_log(phba, KERN_ERR, |
| "BC_%d : Port %c: Unrecognized optic state 0x%x\n", |
| phba->port_name, async_sli->event_data1); |
| return; |
| } |
| |
| if (ASYNC_SLI_LINK_EFFECT_VALID(le)) { |
| /* log link effect for unqualified-4, uncertified-5 optics */ |
| if (state > 3) |
| msg = (ASYNC_SLI_LINK_EFFECT_STATE(le)) ? |
| " Link is non-operational." : |
| " Link is operational."; |
| /* 1 - info */ |
| if (ASYNC_SLI_LINK_EFFECT_SEV(le) == 1) |
| sev = KERN_INFO; |
| /* 2 - error */ |
| if (ASYNC_SLI_LINK_EFFECT_SEV(le) == 2) |
| sev = KERN_ERR; |
| } |
| |
| if (old_state != phba->optic_state) |
| __beiscsi_log(phba, sev, "BC_%d : Port %c: %s%s\n", |
| phba->port_name, |
| beiscsi_port_misconf_event_msg[state], |
| !msg ? "" : msg); |
| } |
| |
| void beiscsi_process_async_event(struct beiscsi_hba *phba, |
| struct be_mcc_compl *compl) |
| { |
| char *sev = KERN_INFO; |
| u8 evt_code; |
| |
| /* interpret flags as an async trailer */ |
| evt_code = compl->flags >> ASYNC_TRAILER_EVENT_CODE_SHIFT; |
| evt_code &= ASYNC_TRAILER_EVENT_CODE_MASK; |
| switch (evt_code) { |
| case ASYNC_EVENT_CODE_LINK_STATE: |
| beiscsi_process_async_link(phba, compl); |
| break; |
| case ASYNC_EVENT_CODE_ISCSI: |
| phba->state |= BE_ADAPTER_CHECK_BOOT; |
| phba->get_boot = BE_GET_BOOT_RETRIES; |
| sev = KERN_ERR; |
| break; |
| case ASYNC_EVENT_CODE_SLI: |
| beiscsi_process_async_sli(phba, compl); |
| break; |
| default: |
| /* event not registered */ |
| sev = KERN_ERR; |
| } |
| |
| beiscsi_log(phba, sev, BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX, |
| "BC_%d : ASYNC Event %x: status 0x%08x flags 0x%08x\n", |
| evt_code, compl->status, compl->flags); |
| } |
| |
| int beiscsi_process_mcc_compl(struct be_ctrl_info *ctrl, |
| struct be_mcc_compl *compl) |
| { |
| struct beiscsi_hba *phba = pci_get_drvdata(ctrl->pdev); |
| u16 compl_status, extd_status; |
| struct be_dma_mem *tag_mem; |
| unsigned int tag, wrb_idx; |
| |
| be_dws_le_to_cpu(compl, 4); |
| tag = (compl->tag0 & MCC_Q_CMD_TAG_MASK); |
| wrb_idx = (compl->tag0 & CQE_STATUS_WRB_MASK) >> CQE_STATUS_WRB_SHIFT; |
| |
| if (!test_bit(MCC_TAG_STATE_RUNNING, |
| &ctrl->ptag_state[tag].tag_state)) { |
| beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_MBOX | |
| BEISCSI_LOG_INIT | BEISCSI_LOG_CONFIG, |
| "BC_%d : MBX cmd completed but not posted\n"); |
| return 0; |
| } |
| |
| if (test_bit(MCC_TAG_STATE_TIMEOUT, &ctrl->ptag_state[tag].tag_state)) { |
| beiscsi_log(phba, KERN_WARNING, |
| BEISCSI_LOG_MBOX | BEISCSI_LOG_INIT | |
| BEISCSI_LOG_CONFIG, |
| "BC_%d : MBX Completion for timeout Command from FW\n"); |
| /** |
| * Check for the size before freeing resource. |
| * Only for non-embedded cmd, PCI resource is allocated. |
| **/ |
| tag_mem = &ctrl->ptag_state[tag].tag_mem_state; |
| if (tag_mem->size) |
| pci_free_consistent(ctrl->pdev, tag_mem->size, |
| tag_mem->va, tag_mem->dma); |
| free_mcc_wrb(ctrl, tag); |
| return 0; |
| } |
| |
| compl_status = (compl->status >> CQE_STATUS_COMPL_SHIFT) & |
| CQE_STATUS_COMPL_MASK; |
| extd_status = (compl->status >> CQE_STATUS_EXTD_SHIFT) & |
| CQE_STATUS_EXTD_MASK; |
| /* The ctrl.mcc_tag_status[tag] is filled with |
| * [31] = valid, [30:24] = Rsvd, [23:16] = wrb, [15:8] = extd_status, |
| * [7:0] = compl_status |
| */ |
| ctrl->mcc_tag_status[tag] = CQE_VALID_MASK; |
| ctrl->mcc_tag_status[tag] |= (wrb_idx << CQE_STATUS_WRB_SHIFT); |
| ctrl->mcc_tag_status[tag] |= (extd_status << CQE_STATUS_ADDL_SHIFT) & |
| CQE_STATUS_ADDL_MASK; |
| ctrl->mcc_tag_status[tag] |= (compl_status & CQE_STATUS_MASK); |
| |
| /* write ordering forced in wake_up_interruptible */ |
| clear_bit(MCC_TAG_STATE_RUNNING, &ctrl->ptag_state[tag].tag_state); |
| wake_up_interruptible(&ctrl->mcc_wait[tag]); |
| return 0; |
| } |
| |
| /* |
| * be_mcc_compl_poll()- Wait for MBX completion |
| * @phba: driver private structure |
| * |
| * Wait till no more pending mcc requests are present |
| * |
| * return |
| * Success: 0 |
| * Failure: Non-Zero |
| * |
| **/ |
| int be_mcc_compl_poll(struct beiscsi_hba *phba, unsigned int tag) |
| { |
| struct be_ctrl_info *ctrl = &phba->ctrl; |
| int i; |
| |
| if (!test_bit(MCC_TAG_STATE_RUNNING, |
| &ctrl->ptag_state[tag].tag_state)) { |
| beiscsi_log(phba, KERN_ERR, |
| BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX, |
| "BC_%d: tag %u state not running\n", tag); |
| return 0; |
| } |
| for (i = 0; i < mcc_timeout; i++) { |
| if (beiscsi_error(phba)) |
| return -EIO; |
| |
| beiscsi_process_mcc_cq(phba); |
| /* after polling, wrb and tag need to be released */ |
| if (!test_bit(MCC_TAG_STATE_RUNNING, |
| &ctrl->ptag_state[tag].tag_state)) { |
| free_mcc_wrb(ctrl, tag); |
| break; |
| } |
| udelay(100); |
| } |
| |
| if (i < mcc_timeout) |
| return 0; |
| |
| beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX, |
| "BC_%d : FW Timed Out\n"); |
| phba->fw_timeout = true; |
| beiscsi_ue_detect(phba); |
| return -EBUSY; |
| } |
| |
| void be_mcc_notify(struct beiscsi_hba *phba, unsigned int tag) |
| { |
| struct be_queue_info *mccq = &phba->ctrl.mcc_obj.q; |
| u32 val = 0; |
| |
| set_bit(MCC_TAG_STATE_RUNNING, &phba->ctrl.ptag_state[tag].tag_state); |
| val |= mccq->id & DB_MCCQ_RING_ID_MASK; |
| val |= 1 << DB_MCCQ_NUM_POSTED_SHIFT; |
| /* make request available for DMA */ |
| wmb(); |
| iowrite32(val, phba->db_va + DB_MCCQ_OFFSET); |
| } |
| |
| /* |
| * be_mbox_db_ready_poll()- Check ready status |
| * @ctrl: Function specific MBX data structure |
| * |
| * Check for the ready status of FW to send BMBX |
| * commands to adapter. |
| * |
| * return |
| * Success: 0 |
| * Failure: Non-Zero |
| **/ |
| static int be_mbox_db_ready_poll(struct be_ctrl_info *ctrl) |
| { |
| /* wait 30s for generic non-flash MBOX operation */ |
| #define BEISCSI_MBX_RDY_BIT_TIMEOUT 30000 |
| void __iomem *db = ctrl->db + MPU_MAILBOX_DB_OFFSET; |
| struct beiscsi_hba *phba = pci_get_drvdata(ctrl->pdev); |
| unsigned long timeout; |
| u32 ready; |
| |
| /* |
| * This BMBX busy wait path is used during init only. |
| * For the commands executed during init, 5s should suffice. |
| */ |
| timeout = jiffies + msecs_to_jiffies(BEISCSI_MBX_RDY_BIT_TIMEOUT); |
| do { |
| if (beiscsi_error(phba)) |
| return -EIO; |
| |
| ready = ioread32(db); |
| if (ready == 0xffffffff) |
| return -EIO; |
| |
| ready &= MPU_MAILBOX_DB_RDY_MASK; |
| if (ready) |
| return 0; |
| |
| if (time_after(jiffies, timeout)) |
| break; |
| msleep(20); |
| } while (!ready); |
| |
| beiscsi_log(phba, KERN_ERR, |
| BEISCSI_LOG_CONFIG | BEISCSI_LOG_MBOX, |
| "BC_%d : FW Timed Out\n"); |
| |
| phba->fw_timeout = true; |
| beiscsi_ue_detect(phba); |
| |
| return -EBUSY; |
| } |
| |
| /* |
| * be_mbox_notify: Notify adapter of new BMBX command |
| * @ctrl: Function specific MBX data structure |
| * |
| * Ring doorbell to inform adapter of a BMBX command |
| * to process |
| * |
| * return |
| * Success: 0 |
| * Failure: Non-Zero |
| **/ |
| int be_mbox_notify(struct be_ctrl_info *ctrl) |
| { |
| int status; |
| u32 val = 0; |
| void __iomem *db = ctrl->db + MPU_MAILBOX_DB_OFFSET; |
| struct be_dma_mem *mbox_mem = &ctrl->mbox_mem; |
| struct be_mcc_mailbox *mbox = mbox_mem->va; |
| |
| status = be_mbox_db_ready_poll(ctrl); |
| if (status) |
| return status; |
| |
| val &= ~MPU_MAILBOX_DB_RDY_MASK; |
| val |= MPU_MAILBOX_DB_HI_MASK; |
| val |= (upper_32_bits(mbox_mem->dma) >> 2) << 2; |
| iowrite32(val, db); |
| |
| status = be_mbox_db_ready_poll(ctrl); |
| if (status) |
| return status; |
| |
| val = 0; |
| val &= ~MPU_MAILBOX_DB_RDY_MASK; |
| val &= ~MPU_MAILBOX_DB_HI_MASK; |
| val |= (u32) (mbox_mem->dma >> 4) << 2; |
| iowrite32(val, db); |
| |
| status = be_mbox_db_ready_poll(ctrl); |
| if (status) |
| return status; |
| |
| /* RDY is set; small delay before CQE read. */ |
| udelay(1); |
| |
| status = beiscsi_process_mbox_compl(ctrl, &mbox->compl); |
| return status; |
| } |
| |
| void be_wrb_hdr_prepare(struct be_mcc_wrb *wrb, int payload_len, |
| bool embedded, u8 sge_cnt) |
| { |
| if (embedded) |
| wrb->embedded |= MCC_WRB_EMBEDDED_MASK; |
| else |
| wrb->embedded |= (sge_cnt & MCC_WRB_SGE_CNT_MASK) << |
| MCC_WRB_SGE_CNT_SHIFT; |
| wrb->payload_length = payload_len; |
| be_dws_cpu_to_le(wrb, 8); |
| } |
| |
| void be_cmd_hdr_prepare(struct be_cmd_req_hdr *req_hdr, |
| u8 subsystem, u8 opcode, int cmd_len) |
| { |
| req_hdr->opcode = opcode; |
| req_hdr->subsystem = subsystem; |
| req_hdr->request_length = cpu_to_le32(cmd_len - sizeof(*req_hdr)); |
| req_hdr->timeout = BEISCSI_FW_MBX_TIMEOUT; |
| } |
| |
| static void be_cmd_page_addrs_prepare(struct phys_addr *pages, u32 max_pages, |
| struct be_dma_mem *mem) |
| { |
| int i, buf_pages; |
| u64 dma = (u64) mem->dma; |
| |
| buf_pages = min(PAGES_4K_SPANNED(mem->va, mem->size), max_pages); |
| for (i = 0; i < buf_pages; i++) { |
| pages[i].lo = cpu_to_le32(dma & 0xFFFFFFFF); |
| pages[i].hi = cpu_to_le32(upper_32_bits(dma)); |
| dma += PAGE_SIZE_4K; |
| } |
| } |
| |
| static u32 eq_delay_to_mult(u32 usec_delay) |
| { |
| #define MAX_INTR_RATE 651042 |
| const u32 round = 10; |
| u32 multiplier; |
| |
| if (usec_delay == 0) |
| multiplier = 0; |
| else { |
| u32 interrupt_rate = 1000000 / usec_delay; |
| if (interrupt_rate == 0) |
| multiplier = 1023; |
| else { |
| multiplier = (MAX_INTR_RATE - interrupt_rate) * round; |
| multiplier /= interrupt_rate; |
| multiplier = (multiplier + round / 2) / round; |
| multiplier = min(multiplier, (u32) 1023); |
| } |
| } |
| return multiplier; |
| } |
| |
| struct be_mcc_wrb *wrb_from_mbox(struct be_dma_mem *mbox_mem) |
| { |
| return &((struct be_mcc_mailbox *)(mbox_mem->va))->wrb; |
| } |
| |
| int beiscsi_cmd_eq_create(struct be_ctrl_info *ctrl, |
| struct be_queue_info *eq, int eq_delay) |
| { |
| struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem); |
| struct be_cmd_req_eq_create *req = embedded_payload(wrb); |
| struct be_cmd_resp_eq_create *resp = embedded_payload(wrb); |
| struct be_dma_mem *q_mem = &eq->dma_mem; |
| int status; |
| |
| mutex_lock(&ctrl->mbox_lock); |
| memset(wrb, 0, sizeof(*wrb)); |
| |
| be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0); |
| |
| be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON, |
| OPCODE_COMMON_EQ_CREATE, sizeof(*req)); |
| |
| req->num_pages = cpu_to_le16(PAGES_4K_SPANNED(q_mem->va, q_mem->size)); |
| |
| AMAP_SET_BITS(struct amap_eq_context, func, req->context, |
| PCI_FUNC(ctrl->pdev->devfn)); |
| AMAP_SET_BITS(struct amap_eq_context, valid, req->context, 1); |
| AMAP_SET_BITS(struct amap_eq_context, size, req->context, 0); |
| AMAP_SET_BITS(struct amap_eq_context, count, req->context, |
| __ilog2_u32(eq->len / 256)); |
| AMAP_SET_BITS(struct amap_eq_context, delaymult, req->context, |
| eq_delay_to_mult(eq_delay)); |
| be_dws_cpu_to_le(req->context, sizeof(req->context)); |
| |
| be_cmd_page_addrs_prepare(req->pages, ARRAY_SIZE(req->pages), q_mem); |
| |
| status = be_mbox_notify(ctrl); |
| if (!status) { |
| eq->id = le16_to_cpu(resp->eq_id); |
| eq->created = true; |
| } |
| mutex_unlock(&ctrl->mbox_lock); |
| return status; |
| } |
| |
| /** |
| * be_cmd_fw_initialize()- Initialize FW |
| * @ctrl: Pointer to function control structure |
| * |
| * Send FW initialize pattern for the function. |
| * |
| * return |
| * Success: 0 |
| * Failure: Non-Zero value |
| **/ |
| int be_cmd_fw_initialize(struct be_ctrl_info *ctrl) |
| { |
| struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem); |
| struct beiscsi_hba *phba = pci_get_drvdata(ctrl->pdev); |
| int status; |
| u8 *endian_check; |
| |
| mutex_lock(&ctrl->mbox_lock); |
| memset(wrb, 0, sizeof(*wrb)); |
| |
| endian_check = (u8 *) wrb; |
| *endian_check++ = 0xFF; |
| *endian_check++ = 0x12; |
| *endian_check++ = 0x34; |
| *endian_check++ = 0xFF; |
| *endian_check++ = 0xFF; |
| *endian_check++ = 0x56; |
| *endian_check++ = 0x78; |
| *endian_check++ = 0xFF; |
| be_dws_cpu_to_le(wrb, sizeof(*wrb)); |
| |
| status = be_mbox_notify(ctrl); |
| if (status) |
| beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT, |
| "BC_%d : be_cmd_fw_initialize Failed\n"); |
| |
| mutex_unlock(&ctrl->mbox_lock); |
| return status; |
| } |
| |
| /** |
| * be_cmd_fw_uninit()- Uinitialize FW |
| * @ctrl: Pointer to function control structure |
| * |
| * Send FW uninitialize pattern for the function |
| * |
| * return |
| * Success: 0 |
| * Failure: Non-Zero value |
| **/ |
| int be_cmd_fw_uninit(struct be_ctrl_info *ctrl) |
| { |
| struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem); |
| struct beiscsi_hba *phba = pci_get_drvdata(ctrl->pdev); |
| int status; |
| u8 *endian_check; |
| |
| mutex_lock(&ctrl->mbox_lock); |
| memset(wrb, 0, sizeof(*wrb)); |
| |
| endian_check = (u8 *) wrb; |
| *endian_check++ = 0xFF; |
| *endian_check++ = 0xAA; |
| *endian_check++ = 0xBB; |
| *endian_check++ = 0xFF; |
| *endian_check++ = 0xFF; |
| *endian_check++ = 0xCC; |
| *endian_check++ = 0xDD; |
| *endian_check = 0xFF; |
| |
| be_dws_cpu_to_le(wrb, sizeof(*wrb)); |
| |
| status = be_mbox_notify(ctrl); |
| if (status) |
| beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT, |
| "BC_%d : be_cmd_fw_uninit Failed\n"); |
| |
| mutex_unlock(&ctrl->mbox_lock); |
| return status; |
| } |
| |
| int beiscsi_cmd_cq_create(struct be_ctrl_info *ctrl, |
| struct be_queue_info *cq, struct be_queue_info *eq, |
| bool sol_evts, bool no_delay, int coalesce_wm) |
| { |
| struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem); |
| struct be_cmd_req_cq_create *req = embedded_payload(wrb); |
| struct be_cmd_resp_cq_create *resp = embedded_payload(wrb); |
| struct beiscsi_hba *phba = pci_get_drvdata(ctrl->pdev); |
| struct be_dma_mem *q_mem = &cq->dma_mem; |
| void *ctxt = &req->context; |
| int status; |
| |
| mutex_lock(&ctrl->mbox_lock); |
| memset(wrb, 0, sizeof(*wrb)); |
| |
| be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0); |
| |
| be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON, |
| OPCODE_COMMON_CQ_CREATE, sizeof(*req)); |
| |
| req->num_pages = cpu_to_le16(PAGES_4K_SPANNED(q_mem->va, q_mem->size)); |
| if (is_chip_be2_be3r(phba)) { |
| AMAP_SET_BITS(struct amap_cq_context, coalescwm, |
| ctxt, coalesce_wm); |
| AMAP_SET_BITS(struct amap_cq_context, nodelay, ctxt, no_delay); |
| AMAP_SET_BITS(struct amap_cq_context, count, ctxt, |
| __ilog2_u32(cq->len / 256)); |
| AMAP_SET_BITS(struct amap_cq_context, valid, ctxt, 1); |
| AMAP_SET_BITS(struct amap_cq_context, solevent, ctxt, sol_evts); |
| AMAP_SET_BITS(struct amap_cq_context, eventable, ctxt, 1); |
| AMAP_SET_BITS(struct amap_cq_context, eqid, ctxt, eq->id); |
| AMAP_SET_BITS(struct amap_cq_context, armed, ctxt, 1); |
| AMAP_SET_BITS(struct amap_cq_context, func, ctxt, |
| PCI_FUNC(ctrl->pdev->devfn)); |
| } else { |
| req->hdr.version = MBX_CMD_VER2; |
| req->page_size = 1; |
| AMAP_SET_BITS(struct amap_cq_context_v2, coalescwm, |
| ctxt, coalesce_wm); |
| AMAP_SET_BITS(struct amap_cq_context_v2, nodelay, |
| ctxt, no_delay); |
| AMAP_SET_BITS(struct amap_cq_context_v2, count, ctxt, |
| __ilog2_u32(cq->len / 256)); |
| AMAP_SET_BITS(struct amap_cq_context_v2, valid, ctxt, 1); |
| AMAP_SET_BITS(struct amap_cq_context_v2, eventable, ctxt, 1); |
| AMAP_SET_BITS(struct amap_cq_context_v2, eqid, ctxt, eq->id); |
| AMAP_SET_BITS(struct amap_cq_context_v2, armed, ctxt, 1); |
| } |
| |
| be_dws_cpu_to_le(ctxt, sizeof(req->context)); |
| |
| be_cmd_page_addrs_prepare(req->pages, ARRAY_SIZE(req->pages), q_mem); |
| |
| status = be_mbox_notify(ctrl); |
| if (!status) { |
| cq->id = le16_to_cpu(resp->cq_id); |
| cq->created = true; |
| } else |
| beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT, |
| "BC_%d : In be_cmd_cq_create, status=ox%08x\n", |
| status); |
| |
| mutex_unlock(&ctrl->mbox_lock); |
| |
| return status; |
| } |
| |
| static u32 be_encoded_q_len(int q_len) |
| { |
| u32 len_encoded = fls(q_len); /* log2(len) + 1 */ |
| if (len_encoded == 16) |
| len_encoded = 0; |
| return len_encoded; |
| } |
| |
| int beiscsi_cmd_mccq_create(struct beiscsi_hba *phba, |
| struct be_queue_info *mccq, |
| struct be_queue_info *cq) |
| { |
| struct be_mcc_wrb *wrb; |
| struct be_cmd_req_mcc_create_ext *req; |
| struct be_dma_mem *q_mem = &mccq->dma_mem; |
| struct be_ctrl_info *ctrl; |
| void *ctxt; |
| int status; |
| |
| mutex_lock(&phba->ctrl.mbox_lock); |
| ctrl = &phba->ctrl; |
| wrb = wrb_from_mbox(&ctrl->mbox_mem); |
| memset(wrb, 0, sizeof(*wrb)); |
| req = embedded_payload(wrb); |
| ctxt = &req->context; |
| |
| be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0); |
| |
| be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON, |
| OPCODE_COMMON_MCC_CREATE_EXT, sizeof(*req)); |
| |
| req->num_pages = PAGES_4K_SPANNED(q_mem->va, q_mem->size); |
| req->async_evt_bitmap = 1 << ASYNC_EVENT_CODE_LINK_STATE; |
| req->async_evt_bitmap |= 1 << ASYNC_EVENT_CODE_ISCSI; |
| req->async_evt_bitmap |= 1 << ASYNC_EVENT_CODE_SLI; |
| |
| AMAP_SET_BITS(struct amap_mcc_context, fid, ctxt, |
| PCI_FUNC(phba->pcidev->devfn)); |
| AMAP_SET_BITS(struct amap_mcc_context, valid, ctxt, 1); |
| AMAP_SET_BITS(struct amap_mcc_context, ring_size, ctxt, |
| be_encoded_q_len(mccq->len)); |
| AMAP_SET_BITS(struct amap_mcc_context, cq_id, ctxt, cq->id); |
| |
| be_dws_cpu_to_le(ctxt, sizeof(req->context)); |
| |
| be_cmd_page_addrs_prepare(req->pages, ARRAY_SIZE(req->pages), q_mem); |
| |
| status = be_mbox_notify(ctrl); |
| if (!status) { |
| struct be_cmd_resp_mcc_create *resp = embedded_payload(wrb); |
| mccq->id = le16_to_cpu(resp->id); |
| mccq->created = true; |
| } |
| mutex_unlock(&phba->ctrl.mbox_lock); |
| |
| return status; |
| } |
| |
| int beiscsi_cmd_q_destroy(struct be_ctrl_info *ctrl, struct be_queue_info *q, |
| int queue_type) |
| { |
| struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem); |
| struct be_cmd_req_q_destroy *req = embedded_payload(wrb); |
| struct beiscsi_hba *phba = pci_get_drvdata(ctrl->pdev); |
| u8 subsys = 0, opcode = 0; |
| int status; |
| |
| beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_INIT, |
| "BC_%d : In beiscsi_cmd_q_destroy " |
| "queue_type : %d\n", queue_type); |
| |
| mutex_lock(&ctrl->mbox_lock); |
| memset(wrb, 0, sizeof(*wrb)); |
| be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0); |
| |
| switch (queue_type) { |
| case QTYPE_EQ: |
| subsys = CMD_SUBSYSTEM_COMMON; |
| opcode = OPCODE_COMMON_EQ_DESTROY; |
| break; |
| case QTYPE_CQ: |
| subsys = CMD_SUBSYSTEM_COMMON; |
| opcode = OPCODE_COMMON_CQ_DESTROY; |
| break; |
| case QTYPE_MCCQ: |
| subsys = CMD_SUBSYSTEM_COMMON; |
| opcode = OPCODE_COMMON_MCC_DESTROY; |
| break; |
| case QTYPE_WRBQ: |
| subsys = CMD_SUBSYSTEM_ISCSI; |
| opcode = OPCODE_COMMON_ISCSI_WRBQ_DESTROY; |
| break; |
| case QTYPE_DPDUQ: |
| subsys = CMD_SUBSYSTEM_ISCSI; |
| opcode = OPCODE_COMMON_ISCSI_DEFQ_DESTROY; |
| break; |
| case QTYPE_SGL: |
| subsys = CMD_SUBSYSTEM_ISCSI; |
| opcode = OPCODE_COMMON_ISCSI_CFG_REMOVE_SGL_PAGES; |
| break; |
| default: |
| mutex_unlock(&ctrl->mbox_lock); |
| BUG(); |
| return -ENXIO; |
| } |
| be_cmd_hdr_prepare(&req->hdr, subsys, opcode, sizeof(*req)); |
| if (queue_type != QTYPE_SGL) |
| req->id = cpu_to_le16(q->id); |
| |
| status = be_mbox_notify(ctrl); |
| |
| mutex_unlock(&ctrl->mbox_lock); |
| return status; |
| } |
| |
| /** |
| * be_cmd_create_default_pdu_queue()- Create DEFQ for the adapter |
| * @ctrl: ptr to ctrl_info |
| * @cq: Completion Queue |
| * @dq: Default Queue |
| * @lenght: ring size |
| * @entry_size: size of each entry in DEFQ |
| * @is_header: Header or Data DEFQ |
| * @ulp_num: Bind to which ULP |
| * |
| * Create HDR/Data DEFQ for the passed ULP. Unsol PDU are posted |
| * on this queue by the FW |
| * |
| * return |
| * Success: 0 |
| * Failure: Non-Zero Value |
| * |
| **/ |
| int be_cmd_create_default_pdu_queue(struct be_ctrl_info *ctrl, |
| struct be_queue_info *cq, |
| struct be_queue_info *dq, int length, |
| int entry_size, uint8_t is_header, |
| uint8_t ulp_num) |
| { |
| struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem); |
| struct be_defq_create_req *req = embedded_payload(wrb); |
| struct be_dma_mem *q_mem = &dq->dma_mem; |
| struct beiscsi_hba *phba = pci_get_drvdata(ctrl->pdev); |
| void *ctxt = &req->context; |
| int status; |
| |
| mutex_lock(&ctrl->mbox_lock); |
| memset(wrb, 0, sizeof(*wrb)); |
| |
| be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0); |
| |
| be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ISCSI, |
| OPCODE_COMMON_ISCSI_DEFQ_CREATE, sizeof(*req)); |
| |
| req->num_pages = PAGES_4K_SPANNED(q_mem->va, q_mem->size); |
| if (phba->fw_config.dual_ulp_aware) { |
| req->ulp_num = ulp_num; |
| req->dua_feature |= (1 << BEISCSI_DUAL_ULP_AWARE_BIT); |
| req->dua_feature |= (1 << BEISCSI_BIND_Q_TO_ULP_BIT); |
| } |
| |
| if (is_chip_be2_be3r(phba)) { |
| AMAP_SET_BITS(struct amap_be_default_pdu_context, |
| rx_pdid, ctxt, 0); |
| AMAP_SET_BITS(struct amap_be_default_pdu_context, |
| rx_pdid_valid, ctxt, 1); |
| AMAP_SET_BITS(struct amap_be_default_pdu_context, |
| pci_func_id, ctxt, PCI_FUNC(ctrl->pdev->devfn)); |
| AMAP_SET_BITS(struct amap_be_default_pdu_context, |
| ring_size, ctxt, |
| be_encoded_q_len(length / |
| sizeof(struct phys_addr))); |
| AMAP_SET_BITS(struct amap_be_default_pdu_context, |
| default_buffer_size, ctxt, entry_size); |
| AMAP_SET_BITS(struct amap_be_default_pdu_context, |
| cq_id_recv, ctxt, cq->id); |
| } else { |
| AMAP_SET_BITS(struct amap_default_pdu_context_ext, |
| rx_pdid, ctxt, 0); |
| AMAP_SET_BITS(struct amap_default_pdu_context_ext, |
| rx_pdid_valid, ctxt, 1); |
| AMAP_SET_BITS(struct amap_default_pdu_context_ext, |
| ring_size, ctxt, |
| be_encoded_q_len(length / |
| sizeof(struct phys_addr))); |
| AMAP_SET_BITS(struct amap_default_pdu_context_ext, |
| default_buffer_size, ctxt, entry_size); |
| AMAP_SET_BITS(struct amap_default_pdu_context_ext, |
| cq_id_recv, ctxt, cq->id); |
| } |
| |
| be_dws_cpu_to_le(ctxt, sizeof(req->context)); |
| |
| be_cmd_page_addrs_prepare(req->pages, ARRAY_SIZE(req->pages), q_mem); |
| |
| status = be_mbox_notify(ctrl); |
| if (!status) { |
| struct be_ring *defq_ring; |
| struct be_defq_create_resp *resp = embedded_payload(wrb); |
| |
| dq->id = le16_to_cpu(resp->id); |
| dq->created = true; |
| if (is_header) |
| defq_ring = &phba->phwi_ctrlr->default_pdu_hdr[ulp_num]; |
| else |
| defq_ring = &phba->phwi_ctrlr-> |
| default_pdu_data[ulp_num]; |
| |
| defq_ring->id = dq->id; |
| |
| if (!phba->fw_config.dual_ulp_aware) { |
| defq_ring->ulp_num = BEISCSI_ULP0; |
| defq_ring->doorbell_offset = DB_RXULP0_OFFSET; |
| } else { |
| defq_ring->ulp_num = resp->ulp_num; |
| defq_ring->doorbell_offset = resp->doorbell_offset; |
| } |
| } |
| mutex_unlock(&ctrl->mbox_lock); |
| |
| return status; |
| } |
| |
| /** |
| * be_cmd_wrbq_create()- Create WRBQ |
| * @ctrl: ptr to ctrl_info |
| * @q_mem: memory details for the queue |
| * @wrbq: queue info |
| * @pwrb_context: ptr to wrb_context |
| * @ulp_num: ULP on which the WRBQ is to be created |
| * |
| * Create WRBQ on the passed ULP_NUM. |
| * |
| **/ |
| int be_cmd_wrbq_create(struct be_ctrl_info *ctrl, |
| struct be_dma_mem *q_mem, |
| struct be_queue_info *wrbq, |
| struct hwi_wrb_context *pwrb_context, |
| uint8_t ulp_num) |
| { |
| struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem); |
| struct be_wrbq_create_req *req = embedded_payload(wrb); |
| struct be_wrbq_create_resp *resp = embedded_payload(wrb); |
| struct beiscsi_hba *phba = pci_get_drvdata(ctrl->pdev); |
| int status; |
| |
| mutex_lock(&ctrl->mbox_lock); |
| memset(wrb, 0, sizeof(*wrb)); |
| |
| be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0); |
| |
| be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ISCSI, |
| OPCODE_COMMON_ISCSI_WRBQ_CREATE, sizeof(*req)); |
| req->num_pages = PAGES_4K_SPANNED(q_mem->va, q_mem->size); |
| |
| if (phba->fw_config.dual_ulp_aware) { |
| req->ulp_num = ulp_num; |
| req->dua_feature |= (1 << BEISCSI_DUAL_ULP_AWARE_BIT); |
| req->dua_feature |= (1 << BEISCSI_BIND_Q_TO_ULP_BIT); |
| } |
| |
| be_cmd_page_addrs_prepare(req->pages, ARRAY_SIZE(req->pages), q_mem); |
| |
| status = be_mbox_notify(ctrl); |
| if (!status) { |
| wrbq->id = le16_to_cpu(resp->cid); |
| wrbq->created = true; |
| |
| pwrb_context->cid = wrbq->id; |
| if (!phba->fw_config.dual_ulp_aware) { |
| pwrb_context->doorbell_offset = DB_TXULP0_OFFSET; |
| pwrb_context->ulp_num = BEISCSI_ULP0; |
| } else { |
| pwrb_context->ulp_num = resp->ulp_num; |
| pwrb_context->doorbell_offset = resp->doorbell_offset; |
| } |
| } |
| mutex_unlock(&ctrl->mbox_lock); |
| return status; |
| } |
| |
| int be_cmd_iscsi_post_template_hdr(struct be_ctrl_info *ctrl, |
| struct be_dma_mem *q_mem) |
| { |
| struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem); |
| struct be_post_template_pages_req *req = embedded_payload(wrb); |
| int status; |
| |
| mutex_lock(&ctrl->mbox_lock); |
| |
| memset(wrb, 0, sizeof(*wrb)); |
| be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0); |
| be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON, |
| OPCODE_COMMON_ADD_TEMPLATE_HEADER_BUFFERS, |
| sizeof(*req)); |
| |
| req->num_pages = PAGES_4K_SPANNED(q_mem->va, q_mem->size); |
| req->type = BEISCSI_TEMPLATE_HDR_TYPE_ISCSI; |
| be_cmd_page_addrs_prepare(req->pages, ARRAY_SIZE(req->pages), q_mem); |
| |
| status = be_mbox_notify(ctrl); |
| mutex_unlock(&ctrl->mbox_lock); |
| return status; |
| } |
| |
| int be_cmd_iscsi_remove_template_hdr(struct be_ctrl_info *ctrl) |
| { |
| struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem); |
| struct be_remove_template_pages_req *req = embedded_payload(wrb); |
| int status; |
| |
| mutex_lock(&ctrl->mbox_lock); |
| |
| memset(wrb, 0, sizeof(*wrb)); |
| be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0); |
| be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON, |
| OPCODE_COMMON_REMOVE_TEMPLATE_HEADER_BUFFERS, |
| sizeof(*req)); |
| |
| req->type = BEISCSI_TEMPLATE_HDR_TYPE_ISCSI; |
| |
| status = be_mbox_notify(ctrl); |
| mutex_unlock(&ctrl->mbox_lock); |
| return status; |
| } |
| |
| int be_cmd_iscsi_post_sgl_pages(struct be_ctrl_info *ctrl, |
| struct be_dma_mem *q_mem, |
| u32 page_offset, u32 num_pages) |
| { |
| struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem); |
| struct be_post_sgl_pages_req *req = embedded_payload(wrb); |
| struct beiscsi_hba *phba = pci_get_drvdata(ctrl->pdev); |
| int status; |
| unsigned int curr_pages; |
| u32 internal_page_offset = 0; |
| u32 temp_num_pages = num_pages; |
| |
| if (num_pages == 0xff) |
| num_pages = 1; |
| |
| mutex_lock(&ctrl->mbox_lock); |
| do { |
| memset(wrb, 0, sizeof(*wrb)); |
| be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0); |
| be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ISCSI, |
| OPCODE_COMMON_ISCSI_CFG_POST_SGL_PAGES, |
| sizeof(*req)); |
| curr_pages = BE_NUMBER_OF_FIELD(struct be_post_sgl_pages_req, |
| pages); |
| req->num_pages = min(num_pages, curr_pages); |
| req->page_offset = page_offset; |
| be_cmd_page_addrs_prepare(req->pages, req->num_pages, q_mem); |
| q_mem->dma = q_mem->dma + (req->num_pages * PAGE_SIZE); |
| internal_page_offset += req->num_pages; |
| page_offset += req->num_pages; |
| num_pages -= req->num_pages; |
| |
| if (temp_num_pages == 0xff) |
| req->num_pages = temp_num_pages; |
| |
| status = be_mbox_notify(ctrl); |
| if (status) { |
| beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT, |
| "BC_%d : FW CMD to map iscsi frags failed.\n"); |
| |
| goto error; |
| } |
| } while (num_pages > 0); |
| error: |
| mutex_unlock(&ctrl->mbox_lock); |
| if (status != 0) |
| beiscsi_cmd_q_destroy(ctrl, NULL, QTYPE_SGL); |
| return status; |
| } |
| |
| int beiscsi_cmd_reset_function(struct beiscsi_hba *phba) |
| { |
| struct be_ctrl_info *ctrl = &phba->ctrl; |
| struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem); |
| struct be_post_sgl_pages_req *req = embedded_payload(wrb); |
| int status; |
| |
| mutex_lock(&ctrl->mbox_lock); |
| |
| req = embedded_payload(wrb); |
| be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0); |
| be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON, |
| OPCODE_COMMON_FUNCTION_RESET, sizeof(*req)); |
| status = be_mbox_notify(ctrl); |
| |
| mutex_unlock(&ctrl->mbox_lock); |
| return status; |
| } |
| |
| /** |
| * be_cmd_set_vlan()- Configure VLAN paramters on the adapter |
| * @phba: device priv structure instance |
| * @vlan_tag: TAG to be set |
| * |
| * Set the VLAN_TAG for the adapter or Disable VLAN on adapter |
| * |
| * returns |
| * TAG for the MBX Cmd |
| * **/ |
| int be_cmd_set_vlan(struct beiscsi_hba *phba, |
| uint16_t vlan_tag) |
| { |
| unsigned int tag; |
| struct be_mcc_wrb *wrb; |
| struct be_cmd_set_vlan_req *req; |
| struct be_ctrl_info *ctrl = &phba->ctrl; |
| |
| if (mutex_lock_interruptible(&ctrl->mbox_lock)) |
| return 0; |
| wrb = alloc_mcc_wrb(phba, &tag); |
| if (!wrb) { |
| mutex_unlock(&ctrl->mbox_lock); |
| return 0; |
| } |
| |
| req = embedded_payload(wrb); |
| be_wrb_hdr_prepare(wrb, sizeof(*wrb), true, 0); |
| be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ISCSI, |
| OPCODE_COMMON_ISCSI_NTWK_SET_VLAN, |
| sizeof(*req)); |
| |
| req->interface_hndl = phba->interface_handle; |
| req->vlan_priority = vlan_tag; |
| |
| be_mcc_notify(phba, tag); |
| mutex_unlock(&ctrl->mbox_lock); |
| |
| return tag; |
| } |