blob: d89442ea4a4d9ebe0acf4b37c4f0e7ac0f924d0b [file] [log] [blame]
/*
* Pin controller and GPIO driver for Amlogic Meson SoCs
*
* Copyright (C) 2014 Beniamino Galvani <b.galvani@gmail.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/gpio.h>
#include <linux/pinctrl/pinctrl.h>
#include <linux/regmap.h>
#include <linux/types.h>
/**
* struct meson_pmx_group - a pinmux group
*
* @name: group name
* @pins: pins in the group
* @num_pins: number of pins in the group
* @is_gpio: whether the group is a single GPIO group
* @reg: register offset for the group in the domain mux registers
* @bit bit index enabling the group
* @domain: index of the domain this group belongs to
*/
struct meson_pmx_group {
const char *name;
const unsigned int *pins;
unsigned int num_pins;
bool is_gpio;
unsigned int reg;
unsigned int bit;
};
/**
* struct meson_pmx_func - a pinmux function
*
* @name: function name
* @groups: groups in the function
* @num_groups: number of groups in the function
*/
struct meson_pmx_func {
const char *name;
const char * const *groups;
unsigned int num_groups;
};
/**
* struct meson_reg_desc - a register descriptor
*
* @reg: register offset in the regmap
* @bit: bit index in register
*
* The structure describes the information needed to control pull,
* pull-enable, direction, etc. for a single pin
*/
struct meson_reg_desc {
unsigned int reg;
unsigned int bit;
};
/**
* enum meson_reg_type - type of registers encoded in @meson_reg_desc
*/
enum meson_reg_type {
REG_PULLEN,
REG_PULL,
REG_DIR,
REG_OUT,
REG_IN,
NUM_REG,
};
/**
* struct meson bank
*
* @name: bank name
* @first: first pin of the bank
* @last: last pin of the bank
* @regs: array of register descriptors
*
* A bank represents a set of pins controlled by a contiguous set of
* bits in the domain registers. The structure specifies which bits in
* the regmap control the different functionalities. Each member of
* the @regs array refers to the first pin of the bank.
*/
struct meson_bank {
const char *name;
unsigned int first;
unsigned int last;
struct meson_reg_desc regs[NUM_REG];
};
/**
* struct meson_domain_data - domain platform data
*
* @name: name of the domain
* @banks: set of banks belonging to the domain
* @num_banks: number of banks in the domain
*/
struct meson_domain_data {
const char *name;
struct meson_bank *banks;
unsigned int num_banks;
unsigned int pin_base;
unsigned int num_pins;
};
/**
* struct meson_domain
*
* @reg_mux: registers for mux settings
* @reg_pullen: registers for pull-enable settings
* @reg_pull: registers for pull settings
* @reg_gpio: registers for gpio settings
* @chip: gpio chip associated with the domain
* @data; platform data for the domain
* @node: device tree node for the domain
*
* A domain represents a set of banks controlled by the same set of
* registers.
*/
struct meson_domain {
struct regmap *reg_mux;
struct regmap *reg_pullen;
struct regmap *reg_pull;
struct regmap *reg_gpio;
struct gpio_chip chip;
struct meson_domain_data *data;
struct device_node *of_node;
};
struct meson_pinctrl_data {
const struct pinctrl_pin_desc *pins;
struct meson_pmx_group *groups;
struct meson_pmx_func *funcs;
struct meson_domain_data *domain_data;
unsigned int num_pins;
unsigned int num_groups;
unsigned int num_funcs;
};
struct meson_pinctrl {
struct device *dev;
struct pinctrl_dev *pcdev;
struct pinctrl_desc desc;
struct meson_pinctrl_data *data;
struct meson_domain *domain;
};
#define PIN(x, b) (b + x)
#define GROUP(grp, r, b) \
{ \
.name = #grp, \
.pins = grp ## _pins, \
.num_pins = ARRAY_SIZE(grp ## _pins), \
.reg = r, \
.bit = b, \
}
#define GPIO_GROUP(gpio, b) \
{ \
.name = #gpio, \
.pins = (const unsigned int[]){ PIN(gpio, b) }, \
.num_pins = 1, \
.is_gpio = true, \
}
#define FUNCTION(fn) \
{ \
.name = #fn, \
.groups = fn ## _groups, \
.num_groups = ARRAY_SIZE(fn ## _groups), \
}
#define BANK(n, f, l, per, peb, pr, pb, dr, db, or, ob, ir, ib) \
{ \
.name = n, \
.first = f, \
.last = l, \
.regs = { \
[REG_PULLEN] = { per, peb }, \
[REG_PULL] = { pr, pb }, \
[REG_DIR] = { dr, db }, \
[REG_OUT] = { or, ob }, \
[REG_IN] = { ir, ib }, \
}, \
}
#define MESON_PIN(x, b) PINCTRL_PIN(PIN(x, b), #x)
extern struct meson_pinctrl_data meson8_cbus_pinctrl_data;
extern struct meson_pinctrl_data meson8_aobus_pinctrl_data;
extern struct meson_pinctrl_data meson8b_cbus_pinctrl_data;
extern struct meson_pinctrl_data meson8b_aobus_pinctrl_data;
extern struct meson_pinctrl_data meson_gxbb_periphs_pinctrl_data;
extern struct meson_pinctrl_data meson_gxbb_aobus_pinctrl_data;