blob: d4f454a4b35e7e5ed8aff7a6d5a326c86d62032f [file] [log] [blame]
/*
* drivers/mtd/nand/fsmc_nand.c
*
* ST Microelectronics
* Flexible Static Memory Controller (FSMC)
* Driver for NAND portions
*
* Copyright © 2010 ST Microelectronics
* Vipin Kumar <vipin.kumar@st.com>
* Ashish Priyadarshi
*
* Based on drivers/mtd/nand/nomadik_nand.c
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/clk.h>
#include <linux/completion.h>
#include <linux/dmaengine.h>
#include <linux/dma-direction.h>
#include <linux/dma-mapping.h>
#include <linux/err.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/resource.h>
#include <linux/sched.h>
#include <linux/types.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/platform_device.h>
#include <linux/of.h>
#include <linux/mtd/partitions.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/mtd/fsmc.h>
#include <linux/amba/bus.h>
#include <mtd/mtd-abi.h>
static int fsmc_ecc1_ooblayout_ecc(struct mtd_info *mtd, int section,
struct mtd_oob_region *oobregion)
{
struct nand_chip *chip = mtd_to_nand(mtd);
if (section >= chip->ecc.steps)
return -ERANGE;
oobregion->offset = (section * 16) + 2;
oobregion->length = 3;
return 0;
}
static int fsmc_ecc1_ooblayout_free(struct mtd_info *mtd, int section,
struct mtd_oob_region *oobregion)
{
struct nand_chip *chip = mtd_to_nand(mtd);
if (section >= chip->ecc.steps)
return -ERANGE;
oobregion->offset = (section * 16) + 8;
if (section < chip->ecc.steps - 1)
oobregion->length = 8;
else
oobregion->length = mtd->oobsize - oobregion->offset;
return 0;
}
static const struct mtd_ooblayout_ops fsmc_ecc1_ooblayout_ops = {
.ecc = fsmc_ecc1_ooblayout_ecc,
.free = fsmc_ecc1_ooblayout_free,
};
/*
* ECC placement definitions in oobfree type format.
* There are 13 bytes of ecc for every 512 byte block and it has to be read
* consecutively and immediately after the 512 byte data block for hardware to
* generate the error bit offsets in 512 byte data.
*/
static int fsmc_ecc4_ooblayout_ecc(struct mtd_info *mtd, int section,
struct mtd_oob_region *oobregion)
{
struct nand_chip *chip = mtd_to_nand(mtd);
if (section >= chip->ecc.steps)
return -ERANGE;
oobregion->length = chip->ecc.bytes;
if (!section && mtd->writesize <= 512)
oobregion->offset = 0;
else
oobregion->offset = (section * 16) + 2;
return 0;
}
static int fsmc_ecc4_ooblayout_free(struct mtd_info *mtd, int section,
struct mtd_oob_region *oobregion)
{
struct nand_chip *chip = mtd_to_nand(mtd);
if (section >= chip->ecc.steps)
return -ERANGE;
oobregion->offset = (section * 16) + 15;
if (section < chip->ecc.steps - 1)
oobregion->length = 3;
else
oobregion->length = mtd->oobsize - oobregion->offset;
return 0;
}
static const struct mtd_ooblayout_ops fsmc_ecc4_ooblayout_ops = {
.ecc = fsmc_ecc4_ooblayout_ecc,
.free = fsmc_ecc4_ooblayout_free,
};
/**
* struct fsmc_nand_data - structure for FSMC NAND device state
*
* @pid: Part ID on the AMBA PrimeCell format
* @mtd: MTD info for a NAND flash.
* @nand: Chip related info for a NAND flash.
* @partitions: Partition info for a NAND Flash.
* @nr_partitions: Total number of partition of a NAND flash.
*
* @bank: Bank number for probed device.
* @clk: Clock structure for FSMC.
*
* @read_dma_chan: DMA channel for read access
* @write_dma_chan: DMA channel for write access to NAND
* @dma_access_complete: Completion structure
*
* @data_pa: NAND Physical port for Data.
* @data_va: NAND port for Data.
* @cmd_va: NAND port for Command.
* @addr_va: NAND port for Address.
* @regs_va: FSMC regs base address.
*/
struct fsmc_nand_data {
u32 pid;
struct nand_chip nand;
struct mtd_partition *partitions;
unsigned int nr_partitions;
unsigned int bank;
struct device *dev;
enum access_mode mode;
struct clk *clk;
/* DMA related objects */
struct dma_chan *read_dma_chan;
struct dma_chan *write_dma_chan;
struct completion dma_access_complete;
struct fsmc_nand_timings *dev_timings;
dma_addr_t data_pa;
void __iomem *data_va;
void __iomem *cmd_va;
void __iomem *addr_va;
void __iomem *regs_va;
void (*select_chip)(uint32_t bank, uint32_t busw);
};
static inline struct fsmc_nand_data *mtd_to_fsmc(struct mtd_info *mtd)
{
return container_of(mtd_to_nand(mtd), struct fsmc_nand_data, nand);
}
/* Assert CS signal based on chipnr */
static void fsmc_select_chip(struct mtd_info *mtd, int chipnr)
{
struct nand_chip *chip = mtd_to_nand(mtd);
struct fsmc_nand_data *host;
host = mtd_to_fsmc(mtd);
switch (chipnr) {
case -1:
chip->cmd_ctrl(mtd, NAND_CMD_NONE, 0 | NAND_CTRL_CHANGE);
break;
case 0:
case 1:
case 2:
case 3:
if (host->select_chip)
host->select_chip(chipnr,
chip->options & NAND_BUSWIDTH_16);
break;
default:
dev_err(host->dev, "unsupported chip-select %d\n", chipnr);
}
}
/*
* fsmc_cmd_ctrl - For facilitaing Hardware access
* This routine allows hardware specific access to control-lines(ALE,CLE)
*/
static void fsmc_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
{
struct nand_chip *this = mtd_to_nand(mtd);
struct fsmc_nand_data *host = mtd_to_fsmc(mtd);
void __iomem *regs = host->regs_va;
unsigned int bank = host->bank;
if (ctrl & NAND_CTRL_CHANGE) {
u32 pc;
if (ctrl & NAND_CLE) {
this->IO_ADDR_R = host->cmd_va;
this->IO_ADDR_W = host->cmd_va;
} else if (ctrl & NAND_ALE) {
this->IO_ADDR_R = host->addr_va;
this->IO_ADDR_W = host->addr_va;
} else {
this->IO_ADDR_R = host->data_va;
this->IO_ADDR_W = host->data_va;
}
pc = readl(FSMC_NAND_REG(regs, bank, PC));
if (ctrl & NAND_NCE)
pc |= FSMC_ENABLE;
else
pc &= ~FSMC_ENABLE;
writel_relaxed(pc, FSMC_NAND_REG(regs, bank, PC));
}
mb();
if (cmd != NAND_CMD_NONE)
writeb_relaxed(cmd, this->IO_ADDR_W);
}
/*
* fsmc_nand_setup - FSMC (Flexible Static Memory Controller) init routine
*
* This routine initializes timing parameters related to NAND memory access in
* FSMC registers
*/
static void fsmc_nand_setup(void __iomem *regs, uint32_t bank,
uint32_t busw, struct fsmc_nand_timings *timings)
{
uint32_t value = FSMC_DEVTYPE_NAND | FSMC_ENABLE | FSMC_WAITON;
uint32_t tclr, tar, thiz, thold, twait, tset;
struct fsmc_nand_timings *tims;
struct fsmc_nand_timings default_timings = {
.tclr = FSMC_TCLR_1,
.tar = FSMC_TAR_1,
.thiz = FSMC_THIZ_1,
.thold = FSMC_THOLD_4,
.twait = FSMC_TWAIT_6,
.tset = FSMC_TSET_0,
};
if (timings)
tims = timings;
else
tims = &default_timings;
tclr = (tims->tclr & FSMC_TCLR_MASK) << FSMC_TCLR_SHIFT;
tar = (tims->tar & FSMC_TAR_MASK) << FSMC_TAR_SHIFT;
thiz = (tims->thiz & FSMC_THIZ_MASK) << FSMC_THIZ_SHIFT;
thold = (tims->thold & FSMC_THOLD_MASK) << FSMC_THOLD_SHIFT;
twait = (tims->twait & FSMC_TWAIT_MASK) << FSMC_TWAIT_SHIFT;
tset = (tims->tset & FSMC_TSET_MASK) << FSMC_TSET_SHIFT;
if (busw)
writel_relaxed(value | FSMC_DEVWID_16,
FSMC_NAND_REG(regs, bank, PC));
else
writel_relaxed(value | FSMC_DEVWID_8,
FSMC_NAND_REG(regs, bank, PC));
writel_relaxed(readl(FSMC_NAND_REG(regs, bank, PC)) | tclr | tar,
FSMC_NAND_REG(regs, bank, PC));
writel_relaxed(thiz | thold | twait | tset,
FSMC_NAND_REG(regs, bank, COMM));
writel_relaxed(thiz | thold | twait | tset,
FSMC_NAND_REG(regs, bank, ATTRIB));
}
/*
* fsmc_enable_hwecc - Enables Hardware ECC through FSMC registers
*/
static void fsmc_enable_hwecc(struct mtd_info *mtd, int mode)
{
struct fsmc_nand_data *host = mtd_to_fsmc(mtd);
void __iomem *regs = host->regs_va;
uint32_t bank = host->bank;
writel_relaxed(readl(FSMC_NAND_REG(regs, bank, PC)) & ~FSMC_ECCPLEN_256,
FSMC_NAND_REG(regs, bank, PC));
writel_relaxed(readl(FSMC_NAND_REG(regs, bank, PC)) & ~FSMC_ECCEN,
FSMC_NAND_REG(regs, bank, PC));
writel_relaxed(readl(FSMC_NAND_REG(regs, bank, PC)) | FSMC_ECCEN,
FSMC_NAND_REG(regs, bank, PC));
}
/*
* fsmc_read_hwecc_ecc4 - Hardware ECC calculator for ecc4 option supported by
* FSMC. ECC is 13 bytes for 512 bytes of data (supports error correction up to
* max of 8-bits)
*/
static int fsmc_read_hwecc_ecc4(struct mtd_info *mtd, const uint8_t *data,
uint8_t *ecc)
{
struct fsmc_nand_data *host = mtd_to_fsmc(mtd);
void __iomem *regs = host->regs_va;
uint32_t bank = host->bank;
uint32_t ecc_tmp;
unsigned long deadline = jiffies + FSMC_BUSY_WAIT_TIMEOUT;
do {
if (readl_relaxed(FSMC_NAND_REG(regs, bank, STS)) & FSMC_CODE_RDY)
break;
else
cond_resched();
} while (!time_after_eq(jiffies, deadline));
if (time_after_eq(jiffies, deadline)) {
dev_err(host->dev, "calculate ecc timed out\n");
return -ETIMEDOUT;
}
ecc_tmp = readl_relaxed(FSMC_NAND_REG(regs, bank, ECC1));
ecc[0] = (uint8_t) (ecc_tmp >> 0);
ecc[1] = (uint8_t) (ecc_tmp >> 8);
ecc[2] = (uint8_t) (ecc_tmp >> 16);
ecc[3] = (uint8_t) (ecc_tmp >> 24);
ecc_tmp = readl_relaxed(FSMC_NAND_REG(regs, bank, ECC2));
ecc[4] = (uint8_t) (ecc_tmp >> 0);
ecc[5] = (uint8_t) (ecc_tmp >> 8);
ecc[6] = (uint8_t) (ecc_tmp >> 16);
ecc[7] = (uint8_t) (ecc_tmp >> 24);
ecc_tmp = readl_relaxed(FSMC_NAND_REG(regs, bank, ECC3));
ecc[8] = (uint8_t) (ecc_tmp >> 0);
ecc[9] = (uint8_t) (ecc_tmp >> 8);
ecc[10] = (uint8_t) (ecc_tmp >> 16);
ecc[11] = (uint8_t) (ecc_tmp >> 24);
ecc_tmp = readl_relaxed(FSMC_NAND_REG(regs, bank, STS));
ecc[12] = (uint8_t) (ecc_tmp >> 16);
return 0;
}
/*
* fsmc_read_hwecc_ecc1 - Hardware ECC calculator for ecc1 option supported by
* FSMC. ECC is 3 bytes for 512 bytes of data (supports error correction up to
* max of 1-bit)
*/
static int fsmc_read_hwecc_ecc1(struct mtd_info *mtd, const uint8_t *data,
uint8_t *ecc)
{
struct fsmc_nand_data *host = mtd_to_fsmc(mtd);
void __iomem *regs = host->regs_va;
uint32_t bank = host->bank;
uint32_t ecc_tmp;
ecc_tmp = readl_relaxed(FSMC_NAND_REG(regs, bank, ECC1));
ecc[0] = (uint8_t) (ecc_tmp >> 0);
ecc[1] = (uint8_t) (ecc_tmp >> 8);
ecc[2] = (uint8_t) (ecc_tmp >> 16);
return 0;
}
/* Count the number of 0's in buff upto a max of max_bits */
static int count_written_bits(uint8_t *buff, int size, int max_bits)
{
int k, written_bits = 0;
for (k = 0; k < size; k++) {
written_bits += hweight8(~buff[k]);
if (written_bits > max_bits)
break;
}
return written_bits;
}
static void dma_complete(void *param)
{
struct fsmc_nand_data *host = param;
complete(&host->dma_access_complete);
}
static int dma_xfer(struct fsmc_nand_data *host, void *buffer, int len,
enum dma_data_direction direction)
{
struct dma_chan *chan;
struct dma_device *dma_dev;
struct dma_async_tx_descriptor *tx;
dma_addr_t dma_dst, dma_src, dma_addr;
dma_cookie_t cookie;
unsigned long flags = DMA_CTRL_ACK | DMA_PREP_INTERRUPT;
int ret;
unsigned long time_left;
if (direction == DMA_TO_DEVICE)
chan = host->write_dma_chan;
else if (direction == DMA_FROM_DEVICE)
chan = host->read_dma_chan;
else
return -EINVAL;
dma_dev = chan->device;
dma_addr = dma_map_single(dma_dev->dev, buffer, len, direction);
if (direction == DMA_TO_DEVICE) {
dma_src = dma_addr;
dma_dst = host->data_pa;
} else {
dma_src = host->data_pa;
dma_dst = dma_addr;
}
tx = dma_dev->device_prep_dma_memcpy(chan, dma_dst, dma_src,
len, flags);
if (!tx) {
dev_err(host->dev, "device_prep_dma_memcpy error\n");
ret = -EIO;
goto unmap_dma;
}
tx->callback = dma_complete;
tx->callback_param = host;
cookie = tx->tx_submit(tx);
ret = dma_submit_error(cookie);
if (ret) {
dev_err(host->dev, "dma_submit_error %d\n", cookie);
goto unmap_dma;
}
dma_async_issue_pending(chan);
time_left =
wait_for_completion_timeout(&host->dma_access_complete,
msecs_to_jiffies(3000));
if (time_left == 0) {
dmaengine_terminate_all(chan);
dev_err(host->dev, "wait_for_completion_timeout\n");
ret = -ETIMEDOUT;
goto unmap_dma;
}
ret = 0;
unmap_dma:
dma_unmap_single(dma_dev->dev, dma_addr, len, direction);
return ret;
}
/*
* fsmc_write_buf - write buffer to chip
* @mtd: MTD device structure
* @buf: data buffer
* @len: number of bytes to write
*/
static void fsmc_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
{
int i;
struct nand_chip *chip = mtd_to_nand(mtd);
if (IS_ALIGNED((uint32_t)buf, sizeof(uint32_t)) &&
IS_ALIGNED(len, sizeof(uint32_t))) {
uint32_t *p = (uint32_t *)buf;
len = len >> 2;
for (i = 0; i < len; i++)
writel_relaxed(p[i], chip->IO_ADDR_W);
} else {
for (i = 0; i < len; i++)
writeb_relaxed(buf[i], chip->IO_ADDR_W);
}
}
/*
* fsmc_read_buf - read chip data into buffer
* @mtd: MTD device structure
* @buf: buffer to store date
* @len: number of bytes to read
*/
static void fsmc_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
{
int i;
struct nand_chip *chip = mtd_to_nand(mtd);
if (IS_ALIGNED((uint32_t)buf, sizeof(uint32_t)) &&
IS_ALIGNED(len, sizeof(uint32_t))) {
uint32_t *p = (uint32_t *)buf;
len = len >> 2;
for (i = 0; i < len; i++)
p[i] = readl_relaxed(chip->IO_ADDR_R);
} else {
for (i = 0; i < len; i++)
buf[i] = readb_relaxed(chip->IO_ADDR_R);
}
}
/*
* fsmc_read_buf_dma - read chip data into buffer
* @mtd: MTD device structure
* @buf: buffer to store date
* @len: number of bytes to read
*/
static void fsmc_read_buf_dma(struct mtd_info *mtd, uint8_t *buf, int len)
{
struct fsmc_nand_data *host = mtd_to_fsmc(mtd);
dma_xfer(host, buf, len, DMA_FROM_DEVICE);
}
/*
* fsmc_write_buf_dma - write buffer to chip
* @mtd: MTD device structure
* @buf: data buffer
* @len: number of bytes to write
*/
static void fsmc_write_buf_dma(struct mtd_info *mtd, const uint8_t *buf,
int len)
{
struct fsmc_nand_data *host = mtd_to_fsmc(mtd);
dma_xfer(host, (void *)buf, len, DMA_TO_DEVICE);
}
/*
* fsmc_read_page_hwecc
* @mtd: mtd info structure
* @chip: nand chip info structure
* @buf: buffer to store read data
* @oob_required: caller expects OOB data read to chip->oob_poi
* @page: page number to read
*
* This routine is needed for fsmc version 8 as reading from NAND chip has to be
* performed in a strict sequence as follows:
* data(512 byte) -> ecc(13 byte)
* After this read, fsmc hardware generates and reports error data bits(up to a
* max of 8 bits)
*/
static int fsmc_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
uint8_t *buf, int oob_required, int page)
{
int i, j, s, stat, eccsize = chip->ecc.size;
int eccbytes = chip->ecc.bytes;
int eccsteps = chip->ecc.steps;
uint8_t *p = buf;
uint8_t *ecc_calc = chip->buffers->ecccalc;
uint8_t *ecc_code = chip->buffers->ecccode;
int off, len, group = 0;
/*
* ecc_oob is intentionally taken as uint16_t. In 16bit devices, we
* end up reading 14 bytes (7 words) from oob. The local array is
* to maintain word alignment
*/
uint16_t ecc_oob[7];
uint8_t *oob = (uint8_t *)&ecc_oob[0];
unsigned int max_bitflips = 0;
for (i = 0, s = 0; s < eccsteps; s++, i += eccbytes, p += eccsize) {
chip->cmdfunc(mtd, NAND_CMD_READ0, s * eccsize, page);
chip->ecc.hwctl(mtd, NAND_ECC_READ);
chip->read_buf(mtd, p, eccsize);
for (j = 0; j < eccbytes;) {
struct mtd_oob_region oobregion;
int ret;
ret = mtd_ooblayout_ecc(mtd, group++, &oobregion);
if (ret)
return ret;
off = oobregion.offset;
len = oobregion.length;
/*
* length is intentionally kept a higher multiple of 2
* to read at least 13 bytes even in case of 16 bit NAND
* devices
*/
if (chip->options & NAND_BUSWIDTH_16)
len = roundup(len, 2);
chip->cmdfunc(mtd, NAND_CMD_READOOB, off, page);
chip->read_buf(mtd, oob + j, len);
j += len;
}
memcpy(&ecc_code[i], oob, chip->ecc.bytes);
chip->ecc.calculate(mtd, p, &ecc_calc[i]);
stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]);
if (stat < 0) {
mtd->ecc_stats.failed++;
} else {
mtd->ecc_stats.corrected += stat;
max_bitflips = max_t(unsigned int, max_bitflips, stat);
}
}
return max_bitflips;
}
/*
* fsmc_bch8_correct_data
* @mtd: mtd info structure
* @dat: buffer of read data
* @read_ecc: ecc read from device spare area
* @calc_ecc: ecc calculated from read data
*
* calc_ecc is a 104 bit information containing maximum of 8 error
* offset informations of 13 bits each in 512 bytes of read data.
*/
static int fsmc_bch8_correct_data(struct mtd_info *mtd, uint8_t *dat,
uint8_t *read_ecc, uint8_t *calc_ecc)
{
struct nand_chip *chip = mtd_to_nand(mtd);
struct fsmc_nand_data *host = mtd_to_fsmc(mtd);
void __iomem *regs = host->regs_va;
unsigned int bank = host->bank;
uint32_t err_idx[8];
uint32_t num_err, i;
uint32_t ecc1, ecc2, ecc3, ecc4;
num_err = (readl_relaxed(FSMC_NAND_REG(regs, bank, STS)) >> 10) & 0xF;
/* no bit flipping */
if (likely(num_err == 0))
return 0;
/* too many errors */
if (unlikely(num_err > 8)) {
/*
* This is a temporary erase check. A newly erased page read
* would result in an ecc error because the oob data is also
* erased to FF and the calculated ecc for an FF data is not
* FF..FF.
* This is a workaround to skip performing correction in case
* data is FF..FF
*
* Logic:
* For every page, each bit written as 0 is counted until these
* number of bits are greater than 8 (the maximum correction
* capability of FSMC for each 512 + 13 bytes)
*/
int bits_ecc = count_written_bits(read_ecc, chip->ecc.bytes, 8);
int bits_data = count_written_bits(dat, chip->ecc.size, 8);
if ((bits_ecc + bits_data) <= 8) {
if (bits_data)
memset(dat, 0xff, chip->ecc.size);
return bits_data;
}
return -EBADMSG;
}
/*
* ------------------- calc_ecc[] bit wise -----------|--13 bits--|
* |---idx[7]--|--.....-----|---idx[2]--||---idx[1]--||---idx[0]--|
*
* calc_ecc is a 104 bit information containing maximum of 8 error
* offset informations of 13 bits each. calc_ecc is copied into a
* uint64_t array and error offset indexes are populated in err_idx
* array
*/
ecc1 = readl_relaxed(FSMC_NAND_REG(regs, bank, ECC1));
ecc2 = readl_relaxed(FSMC_NAND_REG(regs, bank, ECC2));
ecc3 = readl_relaxed(FSMC_NAND_REG(regs, bank, ECC3));
ecc4 = readl_relaxed(FSMC_NAND_REG(regs, bank, STS));
err_idx[0] = (ecc1 >> 0) & 0x1FFF;
err_idx[1] = (ecc1 >> 13) & 0x1FFF;
err_idx[2] = (((ecc2 >> 0) & 0x7F) << 6) | ((ecc1 >> 26) & 0x3F);
err_idx[3] = (ecc2 >> 7) & 0x1FFF;
err_idx[4] = (((ecc3 >> 0) & 0x1) << 12) | ((ecc2 >> 20) & 0xFFF);
err_idx[5] = (ecc3 >> 1) & 0x1FFF;
err_idx[6] = (ecc3 >> 14) & 0x1FFF;
err_idx[7] = (((ecc4 >> 16) & 0xFF) << 5) | ((ecc3 >> 27) & 0x1F);
i = 0;
while (num_err--) {
change_bit(0, (unsigned long *)&err_idx[i]);
change_bit(1, (unsigned long *)&err_idx[i]);
if (err_idx[i] < chip->ecc.size * 8) {
change_bit(err_idx[i], (unsigned long *)dat);
i++;
}
}
return i;
}
static bool filter(struct dma_chan *chan, void *slave)
{
chan->private = slave;
return true;
}
#ifdef CONFIG_OF
static int fsmc_nand_probe_config_dt(struct platform_device *pdev,
struct device_node *np)
{
struct fsmc_nand_platform_data *pdata = dev_get_platdata(&pdev->dev);
u32 val;
int ret;
/* Set default NAND width to 8 bits */
pdata->width = 8;
if (!of_property_read_u32(np, "bank-width", &val)) {
if (val == 2) {
pdata->width = 16;
} else if (val != 1) {
dev_err(&pdev->dev, "invalid bank-width %u\n", val);
return -EINVAL;
}
}
if (of_get_property(np, "nand-skip-bbtscan", NULL))
pdata->options = NAND_SKIP_BBTSCAN;
pdata->nand_timings = devm_kzalloc(&pdev->dev,
sizeof(*pdata->nand_timings), GFP_KERNEL);
if (!pdata->nand_timings)
return -ENOMEM;
ret = of_property_read_u8_array(np, "timings", (u8 *)pdata->nand_timings,
sizeof(*pdata->nand_timings));
if (ret) {
dev_info(&pdev->dev, "No timings in dts specified, using default timings!\n");
pdata->nand_timings = NULL;
}
/* Set default NAND bank to 0 */
pdata->bank = 0;
if (!of_property_read_u32(np, "bank", &val)) {
if (val > 3) {
dev_err(&pdev->dev, "invalid bank %u\n", val);
return -EINVAL;
}
pdata->bank = val;
}
return 0;
}
#else
static int fsmc_nand_probe_config_dt(struct platform_device *pdev,
struct device_node *np)
{
return -ENOSYS;
}
#endif
/*
* fsmc_nand_probe - Probe function
* @pdev: platform device structure
*/
static int __init fsmc_nand_probe(struct platform_device *pdev)
{
struct fsmc_nand_platform_data *pdata = dev_get_platdata(&pdev->dev);
struct device_node __maybe_unused *np = pdev->dev.of_node;
struct fsmc_nand_data *host;
struct mtd_info *mtd;
struct nand_chip *nand;
struct resource *res;
dma_cap_mask_t mask;
int ret = 0;
u32 pid;
int i;
if (np) {
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
pdev->dev.platform_data = pdata;
ret = fsmc_nand_probe_config_dt(pdev, np);
if (ret) {
dev_err(&pdev->dev, "no platform data\n");
return -ENODEV;
}
}
if (!pdata) {
dev_err(&pdev->dev, "platform data is NULL\n");
return -EINVAL;
}
/* Allocate memory for the device structure (and zero it) */
host = devm_kzalloc(&pdev->dev, sizeof(*host), GFP_KERNEL);
if (!host)
return -ENOMEM;
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_data");
host->data_va = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(host->data_va))
return PTR_ERR(host->data_va);
host->data_pa = (dma_addr_t)res->start;
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_addr");
host->addr_va = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(host->addr_va))
return PTR_ERR(host->addr_va);
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_cmd");
host->cmd_va = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(host->cmd_va))
return PTR_ERR(host->cmd_va);
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "fsmc_regs");
host->regs_va = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(host->regs_va))
return PTR_ERR(host->regs_va);
host->clk = clk_get(&pdev->dev, NULL);
if (IS_ERR(host->clk)) {
dev_err(&pdev->dev, "failed to fetch block clock\n");
return PTR_ERR(host->clk);
}
ret = clk_prepare_enable(host->clk);
if (ret)
goto err_clk_prepare_enable;
/*
* This device ID is actually a common AMBA ID as used on the
* AMBA PrimeCell bus. However it is not a PrimeCell.
*/
for (pid = 0, i = 0; i < 4; i++)
pid |= (readl(host->regs_va + resource_size(res) - 0x20 + 4 * i) & 255) << (i * 8);
host->pid = pid;
dev_info(&pdev->dev, "FSMC device partno %03x, manufacturer %02x, "
"revision %02x, config %02x\n",
AMBA_PART_BITS(pid), AMBA_MANF_BITS(pid),
AMBA_REV_BITS(pid), AMBA_CONFIG_BITS(pid));
host->bank = pdata->bank;
host->select_chip = pdata->select_bank;
host->partitions = pdata->partitions;
host->nr_partitions = pdata->nr_partitions;
host->dev = &pdev->dev;
host->dev_timings = pdata->nand_timings;
host->mode = pdata->mode;
if (host->mode == USE_DMA_ACCESS)
init_completion(&host->dma_access_complete);
/* Link all private pointers */
mtd = nand_to_mtd(&host->nand);
nand = &host->nand;
nand_set_controller_data(nand, host);
nand_set_flash_node(nand, np);
mtd->dev.parent = &pdev->dev;
nand->IO_ADDR_R = host->data_va;
nand->IO_ADDR_W = host->data_va;
nand->cmd_ctrl = fsmc_cmd_ctrl;
nand->chip_delay = 30;
/*
* Setup default ECC mode. nand_dt_init() called from nand_scan_ident()
* can overwrite this value if the DT provides a different value.
*/
nand->ecc.mode = NAND_ECC_HW;
nand->ecc.hwctl = fsmc_enable_hwecc;
nand->ecc.size = 512;
nand->options = pdata->options;
nand->select_chip = fsmc_select_chip;
nand->badblockbits = 7;
nand_set_flash_node(nand, np);
if (pdata->width == FSMC_NAND_BW16)
nand->options |= NAND_BUSWIDTH_16;
switch (host->mode) {
case USE_DMA_ACCESS:
dma_cap_zero(mask);
dma_cap_set(DMA_MEMCPY, mask);
host->read_dma_chan = dma_request_channel(mask, filter,
pdata->read_dma_priv);
if (!host->read_dma_chan) {
dev_err(&pdev->dev, "Unable to get read dma channel\n");
goto err_req_read_chnl;
}
host->write_dma_chan = dma_request_channel(mask, filter,
pdata->write_dma_priv);
if (!host->write_dma_chan) {
dev_err(&pdev->dev, "Unable to get write dma channel\n");
goto err_req_write_chnl;
}
nand->read_buf = fsmc_read_buf_dma;
nand->write_buf = fsmc_write_buf_dma;
break;
default:
case USE_WORD_ACCESS:
nand->read_buf = fsmc_read_buf;
nand->write_buf = fsmc_write_buf;
break;
}
fsmc_nand_setup(host->regs_va, host->bank,
nand->options & NAND_BUSWIDTH_16,
host->dev_timings);
if (AMBA_REV_BITS(host->pid) >= 8) {
nand->ecc.read_page = fsmc_read_page_hwecc;
nand->ecc.calculate = fsmc_read_hwecc_ecc4;
nand->ecc.correct = fsmc_bch8_correct_data;
nand->ecc.bytes = 13;
nand->ecc.strength = 8;
}
/*
* Scan to find existence of the device
*/
if (nand_scan_ident(mtd, 1, NULL)) {
ret = -ENXIO;
dev_err(&pdev->dev, "No NAND Device found!\n");
goto err_scan_ident;
}
if (AMBA_REV_BITS(host->pid) >= 8) {
switch (mtd->oobsize) {
case 16:
case 64:
case 128:
case 224:
case 256:
break;
default:
dev_warn(&pdev->dev, "No oob scheme defined for oobsize %d\n",
mtd->oobsize);
ret = -EINVAL;
goto err_probe;
}
mtd_set_ooblayout(mtd, &fsmc_ecc4_ooblayout_ops);
} else {
switch (nand->ecc.mode) {
case NAND_ECC_HW:
dev_info(&pdev->dev, "Using 1-bit HW ECC scheme\n");
nand->ecc.calculate = fsmc_read_hwecc_ecc1;
nand->ecc.correct = nand_correct_data;
nand->ecc.bytes = 3;
nand->ecc.strength = 1;
break;
case NAND_ECC_SOFT:
if (nand->ecc.algo == NAND_ECC_BCH) {
dev_info(&pdev->dev, "Using 4-bit SW BCH ECC scheme\n");
break;
}
default:
dev_err(&pdev->dev, "Unsupported ECC mode!\n");
goto err_probe;
}
/*
* Don't set layout for BCH4 SW ECC. This will be
* generated later in nand_bch_init() later.
*/
if (nand->ecc.mode == NAND_ECC_HW) {
switch (mtd->oobsize) {
case 16:
case 64:
case 128:
mtd_set_ooblayout(mtd,
&fsmc_ecc1_ooblayout_ops);
break;
default:
dev_warn(&pdev->dev,
"No oob scheme defined for oobsize %d\n",
mtd->oobsize);
ret = -EINVAL;
goto err_probe;
}
}
}
/* Second stage of scan to fill MTD data-structures */
if (nand_scan_tail(mtd)) {
ret = -ENXIO;
goto err_probe;
}
/*
* The partition information can is accessed by (in the same precedence)
*
* command line through Bootloader,
* platform data,
* default partition information present in driver.
*/
/*
* Check for partition info passed
*/
mtd->name = "nand";
ret = mtd_device_register(mtd, host->partitions, host->nr_partitions);
if (ret)
goto err_probe;
platform_set_drvdata(pdev, host);
dev_info(&pdev->dev, "FSMC NAND driver registration successful\n");
return 0;
err_probe:
err_scan_ident:
if (host->mode == USE_DMA_ACCESS)
dma_release_channel(host->write_dma_chan);
err_req_write_chnl:
if (host->mode == USE_DMA_ACCESS)
dma_release_channel(host->read_dma_chan);
err_req_read_chnl:
clk_disable_unprepare(host->clk);
err_clk_prepare_enable:
clk_put(host->clk);
return ret;
}
/*
* Clean up routine
*/
static int fsmc_nand_remove(struct platform_device *pdev)
{
struct fsmc_nand_data *host = platform_get_drvdata(pdev);
if (host) {
nand_release(nand_to_mtd(&host->nand));
if (host->mode == USE_DMA_ACCESS) {
dma_release_channel(host->write_dma_chan);
dma_release_channel(host->read_dma_chan);
}
clk_disable_unprepare(host->clk);
clk_put(host->clk);
}
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int fsmc_nand_suspend(struct device *dev)
{
struct fsmc_nand_data *host = dev_get_drvdata(dev);
if (host)
clk_disable_unprepare(host->clk);
return 0;
}
static int fsmc_nand_resume(struct device *dev)
{
struct fsmc_nand_data *host = dev_get_drvdata(dev);
if (host) {
clk_prepare_enable(host->clk);
fsmc_nand_setup(host->regs_va, host->bank,
host->nand.options & NAND_BUSWIDTH_16,
host->dev_timings);
}
return 0;
}
#endif
static SIMPLE_DEV_PM_OPS(fsmc_nand_pm_ops, fsmc_nand_suspend, fsmc_nand_resume);
#ifdef CONFIG_OF
static const struct of_device_id fsmc_nand_id_table[] = {
{ .compatible = "st,spear600-fsmc-nand" },
{ .compatible = "stericsson,fsmc-nand" },
{}
};
MODULE_DEVICE_TABLE(of, fsmc_nand_id_table);
#endif
static struct platform_driver fsmc_nand_driver = {
.remove = fsmc_nand_remove,
.driver = {
.name = "fsmc-nand",
.of_match_table = of_match_ptr(fsmc_nand_id_table),
.pm = &fsmc_nand_pm_ops,
},
};
module_platform_driver_probe(fsmc_nand_driver, fsmc_nand_probe);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Vipin Kumar <vipin.kumar@st.com>, Ashish Priyadarshi");
MODULE_DESCRIPTION("NAND driver for SPEAr Platforms");