| #ifndef _INTEL_RINGBUFFER_H_ |
| #define _INTEL_RINGBUFFER_H_ |
| |
| #include <linux/hashtable.h> |
| #include "i915_gem_batch_pool.h" |
| |
| #define I915_CMD_HASH_ORDER 9 |
| |
| /* Early gen2 devices have a cacheline of just 32 bytes, using 64 is overkill, |
| * but keeps the logic simple. Indeed, the whole purpose of this macro is just |
| * to give some inclination as to some of the magic values used in the various |
| * workarounds! |
| */ |
| #define CACHELINE_BYTES 64 |
| #define CACHELINE_DWORDS (CACHELINE_BYTES / sizeof(uint32_t)) |
| |
| /* |
| * Gen2 BSpec "1. Programming Environment" / 1.4.4.6 "Ring Buffer Use" |
| * Gen3 BSpec "vol1c Memory Interface Functions" / 2.3.4.5 "Ring Buffer Use" |
| * Gen4+ BSpec "vol1c Memory Interface and Command Stream" / 5.3.4.5 "Ring Buffer Use" |
| * |
| * "If the Ring Buffer Head Pointer and the Tail Pointer are on the same |
| * cacheline, the Head Pointer must not be greater than the Tail |
| * Pointer." |
| */ |
| #define I915_RING_FREE_SPACE 64 |
| |
| struct intel_hw_status_page { |
| u32 *page_addr; |
| unsigned int gfx_addr; |
| struct drm_i915_gem_object *obj; |
| }; |
| |
| #define I915_READ_TAIL(ring) I915_READ(RING_TAIL((ring)->mmio_base)) |
| #define I915_WRITE_TAIL(ring, val) I915_WRITE(RING_TAIL((ring)->mmio_base), val) |
| |
| #define I915_READ_START(ring) I915_READ(RING_START((ring)->mmio_base)) |
| #define I915_WRITE_START(ring, val) I915_WRITE(RING_START((ring)->mmio_base), val) |
| |
| #define I915_READ_HEAD(ring) I915_READ(RING_HEAD((ring)->mmio_base)) |
| #define I915_WRITE_HEAD(ring, val) I915_WRITE(RING_HEAD((ring)->mmio_base), val) |
| |
| #define I915_READ_CTL(ring) I915_READ(RING_CTL((ring)->mmio_base)) |
| #define I915_WRITE_CTL(ring, val) I915_WRITE(RING_CTL((ring)->mmio_base), val) |
| |
| #define I915_READ_IMR(ring) I915_READ(RING_IMR((ring)->mmio_base)) |
| #define I915_WRITE_IMR(ring, val) I915_WRITE(RING_IMR((ring)->mmio_base), val) |
| |
| #define I915_READ_MODE(ring) I915_READ(RING_MI_MODE((ring)->mmio_base)) |
| #define I915_WRITE_MODE(ring, val) I915_WRITE(RING_MI_MODE((ring)->mmio_base), val) |
| |
| /* seqno size is actually only a uint32, but since we plan to use MI_FLUSH_DW to |
| * do the writes, and that must have qw aligned offsets, simply pretend it's 8b. |
| */ |
| #define gen8_semaphore_seqno_size sizeof(uint64_t) |
| #define GEN8_SEMAPHORE_OFFSET(__from, __to) \ |
| (((__from) * I915_NUM_ENGINES + (__to)) * gen8_semaphore_seqno_size) |
| #define GEN8_SIGNAL_OFFSET(__ring, to) \ |
| (i915_gem_obj_ggtt_offset(dev_priv->semaphore_obj) + \ |
| GEN8_SEMAPHORE_OFFSET((__ring)->id, (to))) |
| #define GEN8_WAIT_OFFSET(__ring, from) \ |
| (i915_gem_obj_ggtt_offset(dev_priv->semaphore_obj) + \ |
| GEN8_SEMAPHORE_OFFSET(from, (__ring)->id)) |
| |
| #define GEN8_RING_SEMAPHORE_INIT(e) do { \ |
| if (!dev_priv->semaphore_obj) { \ |
| break; \ |
| } \ |
| (e)->semaphore.signal_ggtt[RCS] = GEN8_SIGNAL_OFFSET((e), RCS); \ |
| (e)->semaphore.signal_ggtt[VCS] = GEN8_SIGNAL_OFFSET((e), VCS); \ |
| (e)->semaphore.signal_ggtt[BCS] = GEN8_SIGNAL_OFFSET((e), BCS); \ |
| (e)->semaphore.signal_ggtt[VECS] = GEN8_SIGNAL_OFFSET((e), VECS); \ |
| (e)->semaphore.signal_ggtt[VCS2] = GEN8_SIGNAL_OFFSET((e), VCS2); \ |
| (e)->semaphore.signal_ggtt[(e)->id] = MI_SEMAPHORE_SYNC_INVALID; \ |
| } while(0) |
| |
| enum intel_ring_hangcheck_action { |
| HANGCHECK_IDLE = 0, |
| HANGCHECK_WAIT, |
| HANGCHECK_ACTIVE, |
| HANGCHECK_KICK, |
| HANGCHECK_HUNG, |
| }; |
| |
| #define HANGCHECK_SCORE_RING_HUNG 31 |
| |
| struct intel_ring_hangcheck { |
| u64 acthd; |
| u32 seqno; |
| unsigned user_interrupts; |
| int score; |
| enum intel_ring_hangcheck_action action; |
| int deadlock; |
| u32 instdone[I915_NUM_INSTDONE_REG]; |
| }; |
| |
| struct intel_ringbuffer { |
| struct drm_i915_gem_object *obj; |
| void __iomem *virtual_start; |
| struct i915_vma *vma; |
| |
| struct intel_engine_cs *engine; |
| struct list_head link; |
| |
| u32 head; |
| u32 tail; |
| int space; |
| int size; |
| int effective_size; |
| int reserved_size; |
| |
| /** We track the position of the requests in the ring buffer, and |
| * when each is retired we increment last_retired_head as the GPU |
| * must have finished processing the request and so we know we |
| * can advance the ringbuffer up to that position. |
| * |
| * last_retired_head is set to -1 after the value is consumed so |
| * we can detect new retirements. |
| */ |
| u32 last_retired_head; |
| }; |
| |
| struct intel_context; |
| struct drm_i915_reg_table; |
| |
| /* |
| * we use a single page to load ctx workarounds so all of these |
| * values are referred in terms of dwords |
| * |
| * struct i915_wa_ctx_bb: |
| * offset: specifies batch starting position, also helpful in case |
| * if we want to have multiple batches at different offsets based on |
| * some criteria. It is not a requirement at the moment but provides |
| * an option for future use. |
| * size: size of the batch in DWORDS |
| */ |
| struct i915_ctx_workarounds { |
| struct i915_wa_ctx_bb { |
| u32 offset; |
| u32 size; |
| } indirect_ctx, per_ctx; |
| struct drm_i915_gem_object *obj; |
| }; |
| |
| struct intel_engine_cs { |
| const char *name; |
| enum intel_engine_id { |
| RCS = 0, |
| BCS, |
| VCS, |
| VCS2, /* Keep instances of the same type engine together. */ |
| VECS |
| } id; |
| #define I915_NUM_ENGINES 5 |
| #define _VCS(n) (VCS + (n)) |
| unsigned int exec_id; |
| unsigned int hw_id; |
| unsigned int guc_id; /* XXX same as hw_id? */ |
| u32 mmio_base; |
| struct drm_device *dev; |
| struct intel_ringbuffer *buffer; |
| struct list_head buffers; |
| |
| /* |
| * A pool of objects to use as shadow copies of client batch buffers |
| * when the command parser is enabled. Prevents the client from |
| * modifying the batch contents after software parsing. |
| */ |
| struct i915_gem_batch_pool batch_pool; |
| |
| struct intel_hw_status_page status_page; |
| struct i915_ctx_workarounds wa_ctx; |
| |
| unsigned irq_refcount; /* protected by dev_priv->irq_lock */ |
| u32 irq_enable_mask; /* bitmask to enable ring interrupt */ |
| struct drm_i915_gem_request *trace_irq_req; |
| bool __must_check (*irq_get)(struct intel_engine_cs *ring); |
| void (*irq_put)(struct intel_engine_cs *ring); |
| |
| int (*init_hw)(struct intel_engine_cs *ring); |
| |
| int (*init_context)(struct drm_i915_gem_request *req); |
| |
| void (*write_tail)(struct intel_engine_cs *ring, |
| u32 value); |
| int __must_check (*flush)(struct drm_i915_gem_request *req, |
| u32 invalidate_domains, |
| u32 flush_domains); |
| int (*add_request)(struct drm_i915_gem_request *req); |
| /* Some chipsets are not quite as coherent as advertised and need |
| * an expensive kick to force a true read of the up-to-date seqno. |
| * However, the up-to-date seqno is not always required and the last |
| * seen value is good enough. Note that the seqno will always be |
| * monotonic, even if not coherent. |
| */ |
| void (*irq_seqno_barrier)(struct intel_engine_cs *ring); |
| u32 (*get_seqno)(struct intel_engine_cs *ring); |
| void (*set_seqno)(struct intel_engine_cs *ring, |
| u32 seqno); |
| int (*dispatch_execbuffer)(struct drm_i915_gem_request *req, |
| u64 offset, u32 length, |
| unsigned dispatch_flags); |
| #define I915_DISPATCH_SECURE 0x1 |
| #define I915_DISPATCH_PINNED 0x2 |
| #define I915_DISPATCH_RS 0x4 |
| void (*cleanup)(struct intel_engine_cs *ring); |
| |
| /* GEN8 signal/wait table - never trust comments! |
| * signal to signal to signal to signal to signal to |
| * RCS VCS BCS VECS VCS2 |
| * -------------------------------------------------------------------- |
| * RCS | NOP (0x00) | VCS (0x08) | BCS (0x10) | VECS (0x18) | VCS2 (0x20) | |
| * |------------------------------------------------------------------- |
| * VCS | RCS (0x28) | NOP (0x30) | BCS (0x38) | VECS (0x40) | VCS2 (0x48) | |
| * |------------------------------------------------------------------- |
| * BCS | RCS (0x50) | VCS (0x58) | NOP (0x60) | VECS (0x68) | VCS2 (0x70) | |
| * |------------------------------------------------------------------- |
| * VECS | RCS (0x78) | VCS (0x80) | BCS (0x88) | NOP (0x90) | VCS2 (0x98) | |
| * |------------------------------------------------------------------- |
| * VCS2 | RCS (0xa0) | VCS (0xa8) | BCS (0xb0) | VECS (0xb8) | NOP (0xc0) | |
| * |------------------------------------------------------------------- |
| * |
| * Generalization: |
| * f(x, y) := (x->id * NUM_RINGS * seqno_size) + (seqno_size * y->id) |
| * ie. transpose of g(x, y) |
| * |
| * sync from sync from sync from sync from sync from |
| * RCS VCS BCS VECS VCS2 |
| * -------------------------------------------------------------------- |
| * RCS | NOP (0x00) | VCS (0x28) | BCS (0x50) | VECS (0x78) | VCS2 (0xa0) | |
| * |------------------------------------------------------------------- |
| * VCS | RCS (0x08) | NOP (0x30) | BCS (0x58) | VECS (0x80) | VCS2 (0xa8) | |
| * |------------------------------------------------------------------- |
| * BCS | RCS (0x10) | VCS (0x38) | NOP (0x60) | VECS (0x88) | VCS2 (0xb0) | |
| * |------------------------------------------------------------------- |
| * VECS | RCS (0x18) | VCS (0x40) | BCS (0x68) | NOP (0x90) | VCS2 (0xb8) | |
| * |------------------------------------------------------------------- |
| * VCS2 | RCS (0x20) | VCS (0x48) | BCS (0x70) | VECS (0x98) | NOP (0xc0) | |
| * |------------------------------------------------------------------- |
| * |
| * Generalization: |
| * g(x, y) := (y->id * NUM_RINGS * seqno_size) + (seqno_size * x->id) |
| * ie. transpose of f(x, y) |
| */ |
| struct { |
| u32 sync_seqno[I915_NUM_ENGINES-1]; |
| |
| union { |
| struct { |
| /* our mbox written by others */ |
| u32 wait[I915_NUM_ENGINES]; |
| /* mboxes this ring signals to */ |
| i915_reg_t signal[I915_NUM_ENGINES]; |
| } mbox; |
| u64 signal_ggtt[I915_NUM_ENGINES]; |
| }; |
| |
| /* AKA wait() */ |
| int (*sync_to)(struct drm_i915_gem_request *to_req, |
| struct intel_engine_cs *from, |
| u32 seqno); |
| int (*signal)(struct drm_i915_gem_request *signaller_req, |
| /* num_dwords needed by caller */ |
| unsigned int num_dwords); |
| } semaphore; |
| |
| /* Execlists */ |
| struct tasklet_struct irq_tasklet; |
| spinlock_t execlist_lock; /* used inside tasklet, use spin_lock_bh */ |
| struct list_head execlist_queue; |
| struct list_head execlist_retired_req_list; |
| unsigned int fw_domains; |
| unsigned int next_context_status_buffer; |
| unsigned int idle_lite_restore_wa; |
| bool disable_lite_restore_wa; |
| u32 ctx_desc_template; |
| u32 irq_keep_mask; /* bitmask for interrupts that should not be masked */ |
| int (*emit_request)(struct drm_i915_gem_request *request); |
| int (*emit_flush)(struct drm_i915_gem_request *request, |
| u32 invalidate_domains, |
| u32 flush_domains); |
| int (*emit_bb_start)(struct drm_i915_gem_request *req, |
| u64 offset, unsigned dispatch_flags); |
| |
| /** |
| * List of objects currently involved in rendering from the |
| * ringbuffer. |
| * |
| * Includes buffers having the contents of their GPU caches |
| * flushed, not necessarily primitives. last_read_req |
| * represents when the rendering involved will be completed. |
| * |
| * A reference is held on the buffer while on this list. |
| */ |
| struct list_head active_list; |
| |
| /** |
| * List of breadcrumbs associated with GPU requests currently |
| * outstanding. |
| */ |
| struct list_head request_list; |
| |
| /** |
| * Seqno of request most recently submitted to request_list. |
| * Used exclusively by hang checker to avoid grabbing lock while |
| * inspecting request list. |
| */ |
| u32 last_submitted_seqno; |
| unsigned user_interrupts; |
| |
| bool gpu_caches_dirty; |
| |
| wait_queue_head_t irq_queue; |
| |
| struct intel_context *last_context; |
| |
| struct intel_ring_hangcheck hangcheck; |
| |
| struct { |
| struct drm_i915_gem_object *obj; |
| u32 gtt_offset; |
| volatile u32 *cpu_page; |
| } scratch; |
| |
| bool needs_cmd_parser; |
| |
| /* |
| * Table of commands the command parser needs to know about |
| * for this ring. |
| */ |
| DECLARE_HASHTABLE(cmd_hash, I915_CMD_HASH_ORDER); |
| |
| /* |
| * Table of registers allowed in commands that read/write registers. |
| */ |
| const struct drm_i915_reg_table *reg_tables; |
| int reg_table_count; |
| |
| /* |
| * Returns the bitmask for the length field of the specified command. |
| * Return 0 for an unrecognized/invalid command. |
| * |
| * If the command parser finds an entry for a command in the ring's |
| * cmd_tables, it gets the command's length based on the table entry. |
| * If not, it calls this function to determine the per-ring length field |
| * encoding for the command (i.e. certain opcode ranges use certain bits |
| * to encode the command length in the header). |
| */ |
| u32 (*get_cmd_length_mask)(u32 cmd_header); |
| }; |
| |
| static inline bool |
| intel_engine_initialized(struct intel_engine_cs *engine) |
| { |
| return engine->dev != NULL; |
| } |
| |
| static inline unsigned |
| intel_engine_flag(struct intel_engine_cs *engine) |
| { |
| return 1 << engine->id; |
| } |
| |
| static inline u32 |
| intel_ring_sync_index(struct intel_engine_cs *engine, |
| struct intel_engine_cs *other) |
| { |
| int idx; |
| |
| /* |
| * rcs -> 0 = vcs, 1 = bcs, 2 = vecs, 3 = vcs2; |
| * vcs -> 0 = bcs, 1 = vecs, 2 = vcs2, 3 = rcs; |
| * bcs -> 0 = vecs, 1 = vcs2. 2 = rcs, 3 = vcs; |
| * vecs -> 0 = vcs2, 1 = rcs, 2 = vcs, 3 = bcs; |
| * vcs2 -> 0 = rcs, 1 = vcs, 2 = bcs, 3 = vecs; |
| */ |
| |
| idx = (other - engine) - 1; |
| if (idx < 0) |
| idx += I915_NUM_ENGINES; |
| |
| return idx; |
| } |
| |
| static inline void |
| intel_flush_status_page(struct intel_engine_cs *engine, int reg) |
| { |
| mb(); |
| clflush(&engine->status_page.page_addr[reg]); |
| mb(); |
| } |
| |
| static inline u32 |
| intel_read_status_page(struct intel_engine_cs *engine, int reg) |
| { |
| /* Ensure that the compiler doesn't optimize away the load. */ |
| return READ_ONCE(engine->status_page.page_addr[reg]); |
| } |
| |
| static inline void |
| intel_write_status_page(struct intel_engine_cs *engine, |
| int reg, u32 value) |
| { |
| engine->status_page.page_addr[reg] = value; |
| } |
| |
| /* |
| * Reads a dword out of the status page, which is written to from the command |
| * queue by automatic updates, MI_REPORT_HEAD, MI_STORE_DATA_INDEX, or |
| * MI_STORE_DATA_IMM. |
| * |
| * The following dwords have a reserved meaning: |
| * 0x00: ISR copy, updated when an ISR bit not set in the HWSTAM changes. |
| * 0x04: ring 0 head pointer |
| * 0x05: ring 1 head pointer (915-class) |
| * 0x06: ring 2 head pointer (915-class) |
| * 0x10-0x1b: Context status DWords (GM45) |
| * 0x1f: Last written status offset. (GM45) |
| * 0x20-0x2f: Reserved (Gen6+) |
| * |
| * The area from dword 0x30 to 0x3ff is available for driver usage. |
| */ |
| #define I915_GEM_HWS_INDEX 0x30 |
| #define I915_GEM_HWS_INDEX_ADDR (I915_GEM_HWS_INDEX << MI_STORE_DWORD_INDEX_SHIFT) |
| #define I915_GEM_HWS_SCRATCH_INDEX 0x40 |
| #define I915_GEM_HWS_SCRATCH_ADDR (I915_GEM_HWS_SCRATCH_INDEX << MI_STORE_DWORD_INDEX_SHIFT) |
| |
| struct intel_ringbuffer * |
| intel_engine_create_ringbuffer(struct intel_engine_cs *engine, int size); |
| int intel_pin_and_map_ringbuffer_obj(struct drm_device *dev, |
| struct intel_ringbuffer *ringbuf); |
| void intel_unpin_ringbuffer_obj(struct intel_ringbuffer *ringbuf); |
| void intel_ringbuffer_free(struct intel_ringbuffer *ring); |
| |
| void intel_stop_engine(struct intel_engine_cs *engine); |
| void intel_cleanup_engine(struct intel_engine_cs *engine); |
| |
| int intel_ring_alloc_request_extras(struct drm_i915_gem_request *request); |
| |
| int __must_check intel_ring_begin(struct drm_i915_gem_request *req, int n); |
| int __must_check intel_ring_cacheline_align(struct drm_i915_gem_request *req); |
| static inline void intel_ring_emit(struct intel_engine_cs *engine, |
| u32 data) |
| { |
| struct intel_ringbuffer *ringbuf = engine->buffer; |
| iowrite32(data, ringbuf->virtual_start + ringbuf->tail); |
| ringbuf->tail += 4; |
| } |
| static inline void intel_ring_emit_reg(struct intel_engine_cs *engine, |
| i915_reg_t reg) |
| { |
| intel_ring_emit(engine, i915_mmio_reg_offset(reg)); |
| } |
| static inline void intel_ring_advance(struct intel_engine_cs *engine) |
| { |
| struct intel_ringbuffer *ringbuf = engine->buffer; |
| ringbuf->tail &= ringbuf->size - 1; |
| } |
| int __intel_ring_space(int head, int tail, int size); |
| void intel_ring_update_space(struct intel_ringbuffer *ringbuf); |
| bool intel_engine_stopped(struct intel_engine_cs *engine); |
| |
| int __must_check intel_engine_idle(struct intel_engine_cs *engine); |
| void intel_ring_init_seqno(struct intel_engine_cs *engine, u32 seqno); |
| int intel_ring_flush_all_caches(struct drm_i915_gem_request *req); |
| int intel_ring_invalidate_all_caches(struct drm_i915_gem_request *req); |
| |
| void intel_fini_pipe_control(struct intel_engine_cs *engine); |
| int intel_init_pipe_control(struct intel_engine_cs *engine); |
| |
| int intel_init_render_ring_buffer(struct drm_device *dev); |
| int intel_init_bsd_ring_buffer(struct drm_device *dev); |
| int intel_init_bsd2_ring_buffer(struct drm_device *dev); |
| int intel_init_blt_ring_buffer(struct drm_device *dev); |
| int intel_init_vebox_ring_buffer(struct drm_device *dev); |
| |
| u64 intel_ring_get_active_head(struct intel_engine_cs *engine); |
| |
| int init_workarounds_ring(struct intel_engine_cs *engine); |
| |
| static inline u32 intel_ring_get_tail(struct intel_ringbuffer *ringbuf) |
| { |
| return ringbuf->tail; |
| } |
| |
| /* |
| * Arbitrary size for largest possible 'add request' sequence. The code paths |
| * are complex and variable. Empirical measurement shows that the worst case |
| * is ILK at 136 words. Reserving too much is better than reserving too little |
| * as that allows for corner cases that might have been missed. So the figure |
| * has been rounded up to 160 words. |
| */ |
| #define MIN_SPACE_FOR_ADD_REQUEST 160 |
| |
| /* |
| * Reserve space in the ring to guarantee that the i915_add_request() call |
| * will always have sufficient room to do its stuff. The request creation |
| * code calls this automatically. |
| */ |
| void intel_ring_reserved_space_reserve(struct intel_ringbuffer *ringbuf, int size); |
| /* Cancel the reservation, e.g. because the request is being discarded. */ |
| void intel_ring_reserved_space_cancel(struct intel_ringbuffer *ringbuf); |
| /* Use the reserved space - for use by i915_add_request() only. */ |
| void intel_ring_reserved_space_use(struct intel_ringbuffer *ringbuf); |
| /* Finish with the reserved space - for use by i915_add_request() only. */ |
| void intel_ring_reserved_space_end(struct intel_ringbuffer *ringbuf); |
| |
| /* Legacy ringbuffer specific portion of reservation code: */ |
| int intel_ring_reserve_space(struct drm_i915_gem_request *request); |
| |
| #endif /* _INTEL_RINGBUFFER_H_ */ |