arch/powerpc/boot/dts/fsl/t1023si-post.dtsi - kernel/quantenna - Git at Google

 /*
  * T1023 Silicon/SoC Device Tree Source (post include)
  *
  * Copyright 2014 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
  *     * Redistributions of source code must retain the above copyright
  *	 notice, this list of conditions and the following disclaimer.
  *     * Redistributions in binary form must reproduce the above copyright
  *	 notice, this list of conditions and the following disclaimer in the
  *	 documentation and/or other materials provided with the distribution.
  *     * Neither the name of Freescale Semiconductor nor the
  *	 names of its contributors may be used to endorse or promote products
  *	 derived from this software without specific prior written permission.
  *
  *
  * ALTERNATIVELY, this software may be distributed under the terms of the
  * GNU General Public License ("GPL") as published by the Free Software
  * Foundation, either version 2 of that License or (at your option) any
  * later version.
  *
  * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
  * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
  * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
  * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
  * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */

 #include <dt-bindings/thermal/thermal.h>

 &ifc {
 	#address-cells = <2>;
 	#size-cells = <1>;
 	compatible = "fsl,ifc", "simple-bus";
 	interrupts = <25 2 0 0>;
 };

 &pci0 {
 	compatible = "fsl,t1023-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
 	device_type = "pci";
 	#size-cells = <2>;
 	#address-cells = <3>;
 	bus-range = <0x0 0xff>;
 	interrupts = <20 2 0 0>;
 	fsl,iommu-parent = <&pamu0>;
 	pcie@0 {
 		reg = <0 0 0 0 0>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
 		device_type = "pci";
 		interrupts = <20 2 0 0>;
 		interrupt-map-mask = <0xf800 0 0 7>;
 		interrupt-map = <
 			/* IDSEL 0x0 */
 			0000 0 0 1 &mpic 40 1 0 0
 			0000 0 0 2 &mpic 1 1 0 0
 			0000 0 0 3 &mpic 2 1 0 0
 			0000 0 0 4 &mpic 3 1 0 0
 			>;
 	};
 };

 &pci1 {
 	compatible = "fsl,t1023-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
 	device_type = "pci";
 	#size-cells = <2>;
 	#address-cells = <3>;
 	bus-range = <0 0xff>;
 	interrupts = <21 2 0 0>;
 	fsl,iommu-parent = <&pamu0>;
 	pcie@0 {
 		reg = <0 0 0 0 0>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
 		device_type = "pci";
 		interrupts = <21 2 0 0>;
 		interrupt-map-mask = <0xf800 0 0 7>;
 		interrupt-map = <
 			/* IDSEL 0x0 */
 			0000 0 0 1 &mpic 41 1 0 0
 			0000 0 0 2 &mpic 5 1 0 0
 			0000 0 0 3 &mpic 6 1 0 0
 			0000 0 0 4 &mpic 7 1 0 0
 			>;
 	};
 };

 &pci2 {
 	compatible = "fsl,t1023-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
 	device_type = "pci";
 	#size-cells = <2>;
 	#address-cells = <3>;
 	bus-range = <0x0 0xff>;
 	interrupts = <22 2 0 0>;
 	fsl,iommu-parent = <&pamu0>;
 	pcie@0 {
 		reg = <0 0 0 0 0>;
 		#interrupt-cells = <1>;
 		#size-cells = <2>;
 		#address-cells = <3>;
 		device_type = "pci";
 		interrupts = <22 2 0 0>;
 		interrupt-map-mask = <0xf800 0 0 7>;
 		interrupt-map = <
 			/* IDSEL 0x0 */
 			0000 0 0 1 &mpic 42 1 0 0
 			0000 0 0 2 &mpic 9 1 0 0
 			0000 0 0 3 &mpic 10 1 0 0
 			0000 0 0 4 &mpic 11 1 0 0
 			>;
 	};
 };

 &dcsr {
 	#address-cells = <1>;
 	#size-cells = <1>;
 	compatible = "fsl,dcsr", "simple-bus";

 	dcsr-epu@0 {
 		compatible = "fsl,t1023-dcsr-epu", "fsl,dcsr-epu";
 		interrupts = <52 2 0 0
 			      84 2 0 0
 			      85 2 0 0>;
 		reg = <0x0 0x1000>;
 	};
 	dcsr-npc {
 		compatible = "fsl,t1023-dcsr-cnpc", "fsl,dcsr-cnpc";
 		reg = <0x1000 0x1000 0x1002000 0x10000>;
 	};
 	dcsr-nxc@2000 {
 		compatible = "fsl,dcsr-nxc";
 		reg = <0x2000 0x1000>;
 	};
 	dcsr-corenet {
 		compatible = "fsl,dcsr-corenet";
 		reg = <0x8000 0x1000 0x1A000 0x1000>;
 	};
 	dcsr-ocn@11000 {
 		compatible = "fsl,t1023-dcsr-ocn", "fsl,dcsr-ocn";
 		reg = <0x11000 0x1000>;
 	};
 	dcsr-ddr@12000 {
 		compatible = "fsl,dcsr-ddr";
 		dev-handle = <&ddr1>;
 		reg = <0x12000 0x1000>;
 	};
 	dcsr-nal@18000 {
 		compatible = "fsl,t1023-dcsr-nal", "fsl,dcsr-nal";
 		reg = <0x18000 0x1000>;
 	};
 	dcsr-rcpm@22000 {
 		compatible = "fsl,t1023-dcsr-rcpm", "fsl,dcsr-rcpm";
 		reg = <0x22000 0x1000>;
 	};
 	dcsr-snpc@30000 {
 		compatible = "fsl,t1023-dcsr-snpc", "fsl,dcsr-snpc";
 		reg = <0x30000 0x1000 0x1022000 0x10000>;
 	};
 	dcsr-snpc@31000 {
 		compatible = "fsl,t1023-dcsr-snpc", "fsl,dcsr-snpc";
 		reg = <0x31000 0x1000 0x1042000 0x10000>;
 	};
 	dcsr-cpu-sb-proxy@100000 {
 		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
 		cpu-handle = <&cpu0>;
 		reg = <0x100000 0x1000 0x101000 0x1000>;
 	};
 	dcsr-cpu-sb-proxy@108000 {
 		compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
 		cpu-handle = <&cpu1>;
 		reg = <0x108000 0x1000 0x109000 0x1000>;
 	};
 };

 &soc {
 	#address-cells = <1>;
 	#size-cells = <1>;
 	device_type = "soc";
 	compatible = "simple-bus";

 	soc-sram-error {
 		compatible = "fsl,soc-sram-error";
 		interrupts = <16 2 1 29>;
 	};

 	corenet-law@0 {
 		compatible = "fsl,corenet-law";
 		reg = <0x0 0x1000>;
 		fsl,num-laws = <16>;
 	};

 	ddr1: memory-controller@8000 {
 		compatible = "fsl,qoriq-memory-controller-v5.0",
 				"fsl,qoriq-memory-controller";
 		reg = <0x8000 0x1000>;
 		interrupts = <16 2 1 23>;
 	};

 	cpc: l3-cache-controller@10000 {
 		compatible = "fsl,t1023-l3-cache-controller", "cache";
 		reg = <0x10000 0x1000>;
 		interrupts = <16 2 1 27>;
 	};

 	corenet-cf@18000 {
 		compatible = "fsl,corenet2-cf";
 		reg = <0x18000 0x1000>;
 		interrupts = <16 2 1 31>;
 	};

 	iommu@20000 {
 		compatible = "fsl,pamu-v1.0", "fsl,pamu";
 		reg = <0x20000 0x1000>;
 		ranges = <0 0x20000 0x1000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		interrupts = <
 			24 2 0 0
 			16 2 1 30>;
 		pamu0: pamu@0 {
 			reg = <0 0x1000>;
 			fsl,primary-cache-geometry = <128 1>;
 			fsl,secondary-cache-geometry = <32 2>;
 		};
 	};

 /include/ "qoriq-mpic.dtsi"

 	guts: global-utilities@e0000 {
 		compatible = "fsl,t1023-device-config", "fsl,qoriq-device-config-2.0";
 		reg = <0xe0000 0xe00>;
 		fsl,has-rstcr;
 		fsl,liodn-bits = <12>;
 	};

 /include/ "qoriq-clockgen2.dtsi"
 	global-utilities@e1000 {
 		compatible = "fsl,t1023-clockgen", "fsl,qoriq-clockgen-2.0";
 		mux0: mux0@0 {
 			#clock-cells = <0>;
 			reg = <0x0 4>;
 			compatible = "fsl,core-mux-clock";
 			clocks = <&pll0 0>, <&pll0 1>;
 			clock-names = "pll0_0", "pll0_1";
 			clock-output-names = "cmux0";
 		};
 		mux1: mux1@20 {
 			#clock-cells = <0>;
 			reg = <0x20 4>;
 			compatible = "fsl,core-mux-clock";
 			clocks = <&pll0 0>, <&pll0 1>;
 			clock-names = "pll0_0", "pll0_1";
 			clock-output-names = "cmux1";
 		};
 	};

 	rcpm: global-utilities@e2000 {
 		compatible = "fsl,t1023-rcpm", "fsl,qoriq-rcpm-2.1";
 		reg = <0xe2000 0x1000>;
 	};

 	sfp: sfp@e8000 {
 		compatible = "fsl,t1023-sfp";
 		reg = <0xe8000 0x1000>;
 	};

 	serdes: serdes@ea000 {
 		compatible = "fsl,t1023-serdes";
 		reg = <0xea000 0x4000>;
 	};

 	tmu: tmu@f0000 {
 		compatible = "fsl,qoriq-tmu";
 		reg = <0xf0000 0x1000>;
 		interrupts = <18 2 0 0>;
 		fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x30061>;
 		fsl,tmu-calibration = <0x00000000 0x0000000f
 				       0x00000001 0x00000017
 				       0x00000002 0x0000001e
 				       0x00000003 0x00000026
 				       0x00000004 0x0000002e
 				       0x00000005 0x00000035
 				       0x00000006 0x0000003d
 				       0x00000007 0x00000044
 				       0x00000008 0x0000004c
 				       0x00000009 0x00000053
 				       0x0000000a 0x0000005b
 				       0x0000000b 0x00000064

 				       0x00010000 0x00000011
 				       0x00010001 0x0000001c
 				       0x00010002 0x00000024
 				       0x00010003 0x0000002b
 				       0x00010004 0x00000034
 				       0x00010005 0x00000039
 				       0x00010006 0x00000042
 				       0x00010007 0x0000004c
 				       0x00010008 0x00000051
 				       0x00010009 0x0000005a
 				       0x0001000a 0x00000063

 				       0x00020000 0x00000013
 				       0x00020001 0x00000019
 				       0x00020002 0x00000024
 				       0x00020003 0x0000002c
 				       0x00020004 0x00000035
 				       0x00020005 0x0000003d
 				       0x00020006 0x00000046
 				       0x00020007 0x00000050
 				       0x00020008 0x00000059

 				       0x00030000 0x00000002
 				       0x00030001 0x0000000d
 				       0x00030002 0x00000019
 				       0x00030003 0x00000024>;
 		#thermal-sensor-cells = <0>;
 	};

 	thermal-zones {
 		cpu_thermal: cpu-thermal {
 			polling-delay-passive = <1000>;
 			polling-delay = <5000>;

 			thermal-sensors = <&tmu>;

 			trips {
 				cpu_alert: cpu-alert {
 					temperature = <85000>;
 					hysteresis = <2000>;
 					type = "passive";
 				};
 				cpu_crit: cpu-crit {
 					temperature = <95000>;
 					hysteresis = <2000>;
 					type = "critical";
 				};
 			};

 			cooling-maps {
 				map0 {
 					trip = <&cpu_alert>;
 					cooling-device =
 						<&cpu0 THERMAL_NO_LIMIT
 							THERMAL_NO_LIMIT>;
 				};
 				map1 {
 					trip = <&cpu_alert>;
 					cooling-device =
 						<&cpu1 THERMAL_NO_LIMIT
 							THERMAL_NO_LIMIT>;
 				};
 			};
 		};
 	};

 	scfg: global-utilities@fc000 {
 		compatible = "fsl,t1023-scfg";
 		reg = <0xfc000 0x1000>;
 	};

 /include/ "elo3-dma-0.dtsi"
 /include/ "elo3-dma-1.dtsi"

 /include/ "qoriq-espi-0.dtsi"
 	spi@110000 {
 		fsl,espi-num-chipselects = <4>;
 	};

 /include/ "qoriq-esdhc-0.dtsi"
 	sdhc@114000 {
 		compatible = "fsl,t1023-esdhc", "fsl,esdhc";
 		fsl,iommu-parent = <&pamu0>;
 		fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */
 		sdhci,auto-cmd12;
 		no-1-8-v;
 	};
 /include/ "qoriq-i2c-0.dtsi"
 /include/ "qoriq-i2c-1.dtsi"
 /include/ "qoriq-duart-0.dtsi"
 /include/ "qoriq-duart-1.dtsi"
 /include/ "qoriq-gpio-0.dtsi"
 /include/ "qoriq-gpio-1.dtsi"
 /include/ "qoriq-gpio-2.dtsi"
 /include/ "qoriq-gpio-3.dtsi"
 /include/ "qoriq-usb2-mph-0.dtsi"
 	usb0: usb@210000 {
 		compatible = "fsl-usb2-mph-v2.5", "fsl-usb2-mph";
 		fsl,iommu-parent = <&pamu0>;
 		fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
 		phy_type = "utmi";
 		port0;
 	};
 /include/ "qoriq-usb2-dr-0.dtsi"
 	usb1: usb@211000 {
 		compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
 		fsl,iommu-parent = <&pamu0>;
 		fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */
 		dr_mode = "host";
 		phy_type = "utmi";
 	};
 /include/ "qoriq-sata2-0.dtsi"
 	sata@220000 {
 		fsl,iommu-parent = <&pamu0>;
 		fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */
 	};

 /include/ "qoriq-sec5.0-0.dtsi"

 /include/ "qoriq-fman3l-0.dtsi"
 /include/ "qoriq-fman3-0-10g-0-best-effort.dtsi"
 /include/ "qoriq-fman3-0-1g-1.dtsi"
 /include/ "qoriq-fman3-0-1g-2.dtsi"
 /include/ "qoriq-fman3-0-1g-3.dtsi"
 	fman@400000 {
 		enet0: ethernet@e0000 {
 		};

 		enet1: ethernet@e2000 {
 		};

 		enet2: ethernet@e4000 {
 		};

 		enet3: ethernet@e6000 {
 		};
 	};
 };
	/*
	* T1023 Silicon/SoC Device Tree Source (post include)
	*
	* Copyright 2014 Freescale Semiconductor Inc.
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions are met:
	* * Redistributions of source code must retain the above copyright
	* notice, this list of conditions and the following disclaimer.
	* * Redistributions in binary form must reproduce the above copyright
	* notice, this list of conditions and the following disclaimer in the
	* documentation and/or other materials provided with the distribution.
	* * Neither the name of Freescale Semiconductor nor the
	* names of its contributors may be used to endorse or promote products
	* derived from this software without specific prior written permission.
	*
	*
	* ALTERNATIVELY, this software may be distributed under the terms of the
	* GNU General Public License ("GPL") as published by the Free Software
	* Foundation, either version 2 of that License or (at your option) any
	* later version.
	*
	* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
	* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
	* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
	* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
	* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
	* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
	* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
	* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
	* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	*/

	#include <dt-bindings/thermal/thermal.h>

	&ifc {
	#address-cells = <2>;
	#size-cells = <1>;
	compatible = "fsl,ifc", "simple-bus";
	interrupts = <25 2 0 0>;
	};

	&pci0 {
	compatible = "fsl,t1023-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
	device_type = "pci";
	#size-cells = <2>;
	#address-cells = <3>;
	bus-range = <0x0 0xff>;
	interrupts = <20 2 0 0>;
	fsl,iommu-parent = <&pamu0>;
	pcie@0 {
	reg = <0 0 0 0 0>;
	#interrupt-cells = <1>;
	#size-cells = <2>;
	#address-cells = <3>;
	device_type = "pci";
	interrupts = <20 2 0 0>;
	interrupt-map-mask = <0xf800 0 0 7>;
	interrupt-map = <
	/* IDSEL 0x0 */
	0000 0 0 1 &mpic 40 1 0 0
	0000 0 0 2 &mpic 1 1 0 0
	0000 0 0 3 &mpic 2 1 0 0
	0000 0 0 4 &mpic 3 1 0 0
	>;
	};
	};

	&pci1 {
	compatible = "fsl,t1023-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
	device_type = "pci";
	#size-cells = <2>;
	#address-cells = <3>;
	bus-range = <0 0xff>;
	interrupts = <21 2 0 0>;
	fsl,iommu-parent = <&pamu0>;
	pcie@0 {
	reg = <0 0 0 0 0>;
	#interrupt-cells = <1>;
	#size-cells = <2>;
	#address-cells = <3>;
	device_type = "pci";
	interrupts = <21 2 0 0>;
	interrupt-map-mask = <0xf800 0 0 7>;
	interrupt-map = <
	/* IDSEL 0x0 */
	0000 0 0 1 &mpic 41 1 0 0
	0000 0 0 2 &mpic 5 1 0 0
	0000 0 0 3 &mpic 6 1 0 0
	0000 0 0 4 &mpic 7 1 0 0
	>;
	};
	};

	&pci2 {
	compatible = "fsl,t1023-pcie", "fsl,qoriq-pcie-v2.4", "fsl,qoriq-pcie";
	device_type = "pci";
	#size-cells = <2>;
	#address-cells = <3>;
	bus-range = <0x0 0xff>;
	interrupts = <22 2 0 0>;
	fsl,iommu-parent = <&pamu0>;
	pcie@0 {
	reg = <0 0 0 0 0>;
	#interrupt-cells = <1>;
	#size-cells = <2>;
	#address-cells = <3>;
	device_type = "pci";
	interrupts = <22 2 0 0>;
	interrupt-map-mask = <0xf800 0 0 7>;
	interrupt-map = <
	/* IDSEL 0x0 */
	0000 0 0 1 &mpic 42 1 0 0
	0000 0 0 2 &mpic 9 1 0 0
	0000 0 0 3 &mpic 10 1 0 0
	0000 0 0 4 &mpic 11 1 0 0
	>;
	};
	};

	&dcsr {
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "fsl,dcsr", "simple-bus";

	dcsr-epu@0 {
	compatible = "fsl,t1023-dcsr-epu", "fsl,dcsr-epu";
	interrupts = <52 2 0 0
	84 2 0 0
	85 2 0 0>;
	reg = <0x0 0x1000>;
	};
	dcsr-npc {
	compatible = "fsl,t1023-dcsr-cnpc", "fsl,dcsr-cnpc";
	reg = <0x1000 0x1000 0x1002000 0x10000>;
	};
	dcsr-nxc@2000 {
	compatible = "fsl,dcsr-nxc";
	reg = <0x2000 0x1000>;
	};
	dcsr-corenet {
	compatible = "fsl,dcsr-corenet";
	reg = <0x8000 0x1000 0x1A000 0x1000>;
	};
	dcsr-ocn@11000 {
	compatible = "fsl,t1023-dcsr-ocn", "fsl,dcsr-ocn";
	reg = <0x11000 0x1000>;
	};
	dcsr-ddr@12000 {
	compatible = "fsl,dcsr-ddr";
	dev-handle = <&ddr1>;
	reg = <0x12000 0x1000>;
	};
	dcsr-nal@18000 {
	compatible = "fsl,t1023-dcsr-nal", "fsl,dcsr-nal";
	reg = <0x18000 0x1000>;
	};
	dcsr-rcpm@22000 {
	compatible = "fsl,t1023-dcsr-rcpm", "fsl,dcsr-rcpm";
	reg = <0x22000 0x1000>;
	};
	dcsr-snpc@30000 {
	compatible = "fsl,t1023-dcsr-snpc", "fsl,dcsr-snpc";
	reg = <0x30000 0x1000 0x1022000 0x10000>;
	};
	dcsr-snpc@31000 {
	compatible = "fsl,t1023-dcsr-snpc", "fsl,dcsr-snpc";
	reg = <0x31000 0x1000 0x1042000 0x10000>;
	};
	dcsr-cpu-sb-proxy@100000 {
	compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
	cpu-handle = <&cpu0>;
	reg = <0x100000 0x1000 0x101000 0x1000>;
	};
	dcsr-cpu-sb-proxy@108000 {
	compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
	cpu-handle = <&cpu1>;
	reg = <0x108000 0x1000 0x109000 0x1000>;
	};
	};

	&soc {
	#address-cells = <1>;
	#size-cells = <1>;
	device_type = "soc";
	compatible = "simple-bus";

	soc-sram-error {
	compatible = "fsl,soc-sram-error";
	interrupts = <16 2 1 29>;
	};

	corenet-law@0 {
	compatible = "fsl,corenet-law";
	reg = <0x0 0x1000>;
	fsl,num-laws = <16>;
	};

	ddr1: memory-controller@8000 {
	compatible = "fsl,qoriq-memory-controller-v5.0",
	"fsl,qoriq-memory-controller";
	reg = <0x8000 0x1000>;
	interrupts = <16 2 1 23>;
	};

	cpc: l3-cache-controller@10000 {
	compatible = "fsl,t1023-l3-cache-controller", "cache";
	reg = <0x10000 0x1000>;
	interrupts = <16 2 1 27>;
	};

	corenet-cf@18000 {
	compatible = "fsl,corenet2-cf";
	reg = <0x18000 0x1000>;
	interrupts = <16 2 1 31>;
	};

	iommu@20000 {
	compatible = "fsl,pamu-v1.0", "fsl,pamu";
	reg = <0x20000 0x1000>;
	ranges = <0 0x20000 0x1000>;
	#address-cells = <1>;
	#size-cells = <1>;
	interrupts = <
	24 2 0 0
	16 2 1 30>;
	pamu0: pamu@0 {
	reg = <0 0x1000>;
	fsl,primary-cache-geometry = <128 1>;
	fsl,secondary-cache-geometry = <32 2>;
	};
	};

	/include/ "qoriq-mpic.dtsi"

	guts: global-utilities@e0000 {
	compatible = "fsl,t1023-device-config", "fsl,qoriq-device-config-2.0";
	reg = <0xe0000 0xe00>;
	fsl,has-rstcr;
	fsl,liodn-bits = <12>;
	};

	/include/ "qoriq-clockgen2.dtsi"
	global-utilities@e1000 {
	compatible = "fsl,t1023-clockgen", "fsl,qoriq-clockgen-2.0";
	mux0: mux0@0 {
	#clock-cells = <0>;
	reg = <0x0 4>;
	compatible = "fsl,core-mux-clock";
	clocks = <&pll0 0>, <&pll0 1>;
	clock-names = "pll0_0", "pll0_1";
	clock-output-names = "cmux0";
	};
	mux1: mux1@20 {
	#clock-cells = <0>;
	reg = <0x20 4>;
	compatible = "fsl,core-mux-clock";
	clocks = <&pll0 0>, <&pll0 1>;
	clock-names = "pll0_0", "pll0_1";
	clock-output-names = "cmux1";
	};
	};

	rcpm: global-utilities@e2000 {
	compatible = "fsl,t1023-rcpm", "fsl,qoriq-rcpm-2.1";
	reg = <0xe2000 0x1000>;
	};

	sfp: sfp@e8000 {
	compatible = "fsl,t1023-sfp";
	reg = <0xe8000 0x1000>;
	};

	serdes: serdes@ea000 {
	compatible = "fsl,t1023-serdes";
	reg = <0xea000 0x4000>;
	};

	tmu: tmu@f0000 {
	compatible = "fsl,qoriq-tmu";
	reg = <0xf0000 0x1000>;
	interrupts = <18 2 0 0>;
	fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x30061>;
	fsl,tmu-calibration = <0x00000000 0x0000000f
	0x00000001 0x00000017
	0x00000002 0x0000001e
	0x00000003 0x00000026
	0x00000004 0x0000002e
	0x00000005 0x00000035
	0x00000006 0x0000003d
	0x00000007 0x00000044
	0x00000008 0x0000004c
	0x00000009 0x00000053
	0x0000000a 0x0000005b
	0x0000000b 0x00000064

	0x00010000 0x00000011
	0x00010001 0x0000001c
	0x00010002 0x00000024
	0x00010003 0x0000002b
	0x00010004 0x00000034
	0x00010005 0x00000039
	0x00010006 0x00000042
	0x00010007 0x0000004c
	0x00010008 0x00000051
	0x00010009 0x0000005a
	0x0001000a 0x00000063

	0x00020000 0x00000013
	0x00020001 0x00000019
	0x00020002 0x00000024
	0x00020003 0x0000002c
	0x00020004 0x00000035
	0x00020005 0x0000003d
	0x00020006 0x00000046
	0x00020007 0x00000050
	0x00020008 0x00000059

	0x00030000 0x00000002
	0x00030001 0x0000000d
	0x00030002 0x00000019
	0x00030003 0x00000024>;
	#thermal-sensor-cells = <0>;
	};

	thermal-zones {
	cpu_thermal: cpu-thermal {
	polling-delay-passive = <1000>;
	polling-delay = <5000>;

	thermal-sensors = <&tmu>;

	trips {
	cpu_alert: cpu-alert {
	temperature = <85000>;
	hysteresis = <2000>;
	type = "passive";
	};
	cpu_crit: cpu-crit {
	temperature = <95000>;
	hysteresis = <2000>;
	type = "critical";
	};
	};

	cooling-maps {
	map0 {
	trip = <&cpu_alert>;
	cooling-device =
	<&cpu0 THERMAL_NO_LIMIT
	THERMAL_NO_LIMIT>;
	};
	map1 {
	trip = <&cpu_alert>;
	cooling-device =
	<&cpu1 THERMAL_NO_LIMIT
	THERMAL_NO_LIMIT>;
	};
	};
	};
	};

	scfg: global-utilities@fc000 {
	compatible = "fsl,t1023-scfg";
	reg = <0xfc000 0x1000>;
	};

	/include/ "elo3-dma-0.dtsi"
	/include/ "elo3-dma-1.dtsi"

	/include/ "qoriq-espi-0.dtsi"
	spi@110000 {
	fsl,espi-num-chipselects = <4>;
	};

	/include/ "qoriq-esdhc-0.dtsi"
	sdhc@114000 {
	compatible = "fsl,t1023-esdhc", "fsl,esdhc";
	fsl,iommu-parent = <&pamu0>;
	fsl,liodn-reg = <&guts 0x530>; /* eSDHCLIODNR */
	sdhci,auto-cmd12;
	no-1-8-v;
	};
	/include/ "qoriq-i2c-0.dtsi"
	/include/ "qoriq-i2c-1.dtsi"
	/include/ "qoriq-duart-0.dtsi"
	/include/ "qoriq-duart-1.dtsi"
	/include/ "qoriq-gpio-0.dtsi"
	/include/ "qoriq-gpio-1.dtsi"
	/include/ "qoriq-gpio-2.dtsi"
	/include/ "qoriq-gpio-3.dtsi"
	/include/ "qoriq-usb2-mph-0.dtsi"
	usb0: usb@210000 {
	compatible = "fsl-usb2-mph-v2.5", "fsl-usb2-mph";
	fsl,iommu-parent = <&pamu0>;
	fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
	phy_type = "utmi";
	port0;
	};
	/include/ "qoriq-usb2-dr-0.dtsi"
	usb1: usb@211000 {
	compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
	fsl,iommu-parent = <&pamu0>;
	fsl,liodn-reg = <&guts 0x524>; /* USB2LIODNR */
	dr_mode = "host";
	phy_type = "utmi";
	};
	/include/ "qoriq-sata2-0.dtsi"
	sata@220000 {
	fsl,iommu-parent = <&pamu0>;
	fsl,liodn-reg = <&guts 0x550>; /* SATA1LIODNR */
	};

	/include/ "qoriq-sec5.0-0.dtsi"

	/include/ "qoriq-fman3l-0.dtsi"
	/include/ "qoriq-fman3-0-10g-0-best-effort.dtsi"
	/include/ "qoriq-fman3-0-1g-1.dtsi"
	/include/ "qoriq-fman3-0-1g-2.dtsi"
	/include/ "qoriq-fman3-0-1g-3.dtsi"
	fman@400000 {
	enet0: ethernet@e0000 {
	};

	enet1: ethernet@e2000 {
	};

	enet2: ethernet@e4000 {
	};

	enet3: ethernet@e6000 {
	};
	};
	};