| * AT86RF230 IEEE 802.15.4 * |
| |
| Required properties: |
| - compatible: should be "atmel,at86rf230", "atmel,at86rf231", |
| "atmel,at86rf233" or "atmel,at86rf212" |
| - spi-max-frequency: maximal bus speed, should be set to 7500000 depends |
| sync or async operation mode |
| - reg: the chipselect index |
| - interrupts: the interrupt generated by the device. Non high-level |
| can occur deadlocks while handling isr. |
| |
| Optional properties: |
| - reset-gpio: GPIO spec for the rstn pin |
| - sleep-gpio: GPIO spec for the slp_tr pin |
| - xtal-trim: u8 value for fine tuning the internal capacitance |
| arrays of xtal pins: 0 = +0 pF, 0xf = +4.5 pF |
| |
| Example: |
| |
| at86rf231@0 { |
| compatible = "atmel,at86rf231"; |
| spi-max-frequency = <7500000>; |
| reg = <0>; |
| interrupts = <19 4>; |
| interrupt-parent = <&gpio3>; |
| xtal-trim = /bits/ 8 <0x06>; |
| }; |
